k_poll_signal_raise() returns an error code to indicate that the raise
was too late to notify an expiring poll. Make clear that this does not
mean that the signal was lost: a subsequent poll will find it and expire
immediately.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
device_get_binding() compares pointers first before doing strcmp().
However, enabling coverage forces -O0 to disable any compiler
optimizations. There would be multiple copies of the same string,
and the code pathing doing pointer comparsion would not be tested
at all. So add this flag to merge string constants such that
the pointer comparison would be exercised.
This also adds a bad driver which fails initialization. This is
to make sure that execution path is covered.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Extended the maximum possible number of sections that track statistics
for each flash page.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the UTIL_DEC_N definitions to handle the UTIL_REPEAT macro with
up to 256 repetitions.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Changed type of the paramater that determines the number of elements in
the stats group. Now it is possible to declared more than 256 elements.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
IRQ_CONNECT and irq_enable calls in the SiFive UART driver were
misconfigured when the conversion to DeviceTree support occurred.
See also: https://github.com/zephyrproject-rtos/zephyr/pull/10613
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
The mimxrt1015_evk board image was corrupted and did not display
properly in the board documentation. Fix it.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix the nRF52840 Coded PHY radio timings based on testing
with conformance tester.
Fixes the following conformance tests:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI Change]
LL/CON/MAS/BV-54-C [Slave Receiving Data, LE Coded, CI Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression in Coded PHY CI change implementation
introduced by reverting the commit 9d1ca9c390 ("Bluetooth:
controller: remove redundant PPI channel and TIMER CC").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This adds support for the async API for SAM0 SERCOM SPI using
DMA to drive the device. This implementation does the reload
for both transmit and receive in the receive DMA handler.
Doing this simplifies the implementation but means that the
transmit drains completely, resulting in the SPI clock pausing
between buffers while both are reloaded in the receive handler.
Tested with tests/drivers/spi/spi_loopback and several simple
programs monitored with a logic analyzer.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This was tested with the hello world application. UART 0 was used
as console for displaying "Hello World! mec15xxevb_assy6853" to
the serial terminal.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
soc : arm : microchip_mec Use rename fault clear function
The Cortex-M core function to clear faults was rename by
upstream. Update to use new name.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Initial support for Microchip MEC1501 series is added to the tree.
Additional support for UART is also included. This SoC supports
two operational modes for interrupts (Direct and Aggregated). For
this commit, the direct capable interrupt are configured in direct
mode.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Initial support for Microchip MEC1501 series is added to the tree.
Additional support for UART is also included. This SoC supports
two operational modes for interrupts (Direct and Aggregated). For
this commit, the direct capable interrupts are configured in
direct mode.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
As the getaddrinfo() test is suppose to be self contained, then
we will need to install handler for the sent DNS query. After we
receive the query in process_dns() thread, we verify that the
query was sent properly. We do not return DNS reply back to
the caller in this case as we do not want to create DNS server
just for this simple test application. This can be changed later
if we get DNS server functionality in Zephyr network stack.
Fixes#15193
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the loopback driver is enabled, then the packet might come
from localhost in which case mark it properly. Without this marking
the packet from/to 127.0.0.1 or ::1 would be dropped in later checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding possibility to modify shell prompt in Kconfig and in prj.config
file.
Fixes#14547.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When importing a pre compiled imported library it is currently
required to perform three steps.
This commit introduces a helper function which allows the
user to import a library with a single function call.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
The intent of toolchain_ld_baremetal() is to collect the flags belonging
to non-hosted (i.e. POSIX-based) targets.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
* LINKERFLAGPREFIX's value is GNU ld specific, and
* LINKERFLAGPREFIX is not a convention always honored by all linkers.
Thus we shall not set it from the common root CMakeList.txt.
So we move to linker/ld/target.cmake.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
When performing thread context-switch it is not necessary to
have IRQs locked while saving the current thread's callee-saved
(and possibly floating point) registers. We only need to lock
the interrupts when accessing the thread ready queue cache.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
SVCall_IRQn is used as enum value for SV Call Interrupt for Cortex-M
based SoCs for which CPU_CORTEX_M_HAS_BASEPRI=y. However stm32cube
for stm32l1xx uses SVC_IRQn enum value for this purpose.
This leads to this error:
arch/arm/include/cortex_m/exc.h:101:19: error: 'SVCall_IRQn'
undeclared (first use in this function); did you mean 'SVC_IRQn'?
NVIC_SetPriority(SVCall_IRQn, _EXC_SVC_PRIO);
^~~~~~~~~~~
SVC_IRQn
NB: ext/hal/st/stm32cube/stm32l1xx/soc/stm32l151xb.h file was already
fixed in 9f8260457b ('ext: hal: st: stm32cube: Add HAL for
the STM32L1x series').
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Added Kconfig BT_MAYFLY_YIELD_AFTER_CALL to support vendor requirement
of invoking all outstanding mayflies for a given callee in
mayfly_run().
Signed-off-by: Morten Priess <mtpr@oticon.com>
In ull.c ll_rx_get, a configuration without CONFIG_BT_CONN would
sometimes return an uninitialized node_rx.
In ull_scan.c, the scanning channel was not initialized to 0 (37). This
would cause new scanning to start at random index (0,1,2).
Signed-off-by: Morten Priess <mtpr@oticon.com>
clang doesn't understand fortify at all, provide no op macro,
in order to handle the request to fortify in a generic way.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In case TOOLCHAIN_HOME isn't explicitly reuqested,
(or indirectly forced with CLANG_ROOT_DIR), detect
any host installed clang in the path.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The logic is practically intact and is the following:
1. Use any host installed llvm/clang in the path in case
ZEPHYR_TOOLCHAIN_VARIANT=llvm is requested alone.
2. This can be further restricted with TOOLCHAIN_HOME.
3. And can be further overridden with CLANG_ROOT_DIR,
like previously.
So, only the unconditional restriction to /usr is lifted.
Together with fixing the unconditional set of TOOLCHAIN_HOME
by host tools for non-toolchain needs, this makes the logic
more flexible.
Now, after the logic is controllable by TOOLCHAIN_HOME, 3)
might be an extra, but is left intact for backward compatibility.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Host-tools don't unconditionally set TOOLCHAIN_HOME anymore,
but in case Zephyr's SDK toolchain is used, set TOOLCHAIN_HOME.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Use it's own variable HOST_TOOLS_HOME for host tools and don't
unconditionally set TOOLCHAIN_HOME, preventing the detection of
llvm/clang host toolchain.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Allow host installed clang to be used for native_posix when
ZEPHYR_TOOLCHAIN_VARIANT=llvm.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
When linking, clang doesn't pick -T for some reason and complains,
while -Wl,-T works for both, gcc and clang.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add defines to support updated slot reservation calculation in advertise
Note: Numbers used in added defines are subject to HW specific tuning
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Added a new define (EVENT_IFS_US) to pdu.h - this is now used instead of
previous TIFS_US from vendor specific header
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Correct slot reservation time calc for legacy advertise
Add dependency on data lengths for advertise and scan response
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The function zephyr_append_cmake_library works with
libraries that does not have source files.
This change removes an incorrect statement related
to that.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Fix regression by the addition of CONFIG_BT_CONN conditional
compilation that disabled the advanced clock (crystal)
oscillator management when only observer and/or advertiser
states supported in the controller build.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
