The code to sanitize the generated font path by removing bindir
improperly stripped the first character of every argument when --bindir
was not provided, corrupting the command documentation when fonts are
generated manually. Only sanitize if --bindir was provided with
non-empty content.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The size_t type is either compatible with an int on 32-bit target, or
a long on 64-bit targets. It could even be a long even on some 32-bit
targets. Let's use the z qualifier in the printf format to be compatible
with whatever flavor in use.
In case of pointers, let's just use %p with pointers directly and
avoid casts altogether.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Fix USB phy node for stm32l432 and stm32l452, which contain
a USB controller and not a OTG FS controller.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
In SAM SoCs Watchdog is selected by default and runs
with some default configuration, unless the build sets
CONFIG_WDT_DISABLE_AT_BOOT. As the tests/kernel/critical
takes relatively large amount of time to complete, the
watchdog (that is never fed in the test) will eventually
trigger a reset. As a result the test keeps restarting
continuously and never completes. We want to run the
test on SAM SoCs, so we do the following:
- filter our the SAM SoCs with the SAM WDT from the
default build
- introduce an alternative test-case for these SoCs
with the additional CONFIG_WDT_DISABLE_AT_BOOT
option set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Having this option disabled, MITM flag state can be controlled by
bt_conn_security state. This option is enabled by default to not
change the current implementation behavior.
Related to SM/MAS/SCPK/BV-01-C.
Fixes#17463
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
At the time these overlays were created the author was unclear on how to
correctly represent SPI chip selects on a target where the peripheral
does not control that signal. As such the pin assignment was present
only as documentation.
Enlightenment was subsequently achieved and the cs-gpios property should
be properly defined.
Note that the mesh feather does not define a chip select to be used with
the spi1 peripheral.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The Particle mesh feather boards provide device-tree overlays that
allow individual applications to select the SPI peripheral to be
used for the pins associated with a specific labelled SPI device.
This is necessary because different peripheral instances have slightly
different properties.
Add BOARD_DIR to DTS_ROOTS so these shared files can be located when
included from application-specific overlays.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Now that the generation script doesn't look at the "generation" in the
YAML, we can remove it from the binding files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Remove dead code that referenced 'generation' but didn't do anything
with it
* Replace looking at 'generation' with a simple check for property
starting with # (for things like #address-cells, etc) or ending in
-map (for things like gpio-map) to skip
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree and its setting
for random/unique addresses.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
uint8-array is the name for what the devicetree specification calls a
bytestring.
The original parsing code treated square brackets as equivalent to
quotes or angle brackets, failing to interpret elements as hex-encoded.
This was a bug, corrected in this patch by processing content as a
sequence of hex-encoded bytes with arbitrary whitespace.
The original generating code emitted the property as individual
elements. Replace that with generation of a single structure
initializer, which is more useful in cases where the length of a
property value may vary between nodes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Delete IPSP sample file, this source file is not included in any build
files. The service contains no valuable logic other than advertising
with the IPSP service in the advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the HID over GATT service into the sample that demonstrates it.
This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the Current Time service into the sample that demonstrates it.
This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the health thermometer service into the sample folder that
demonstrates it. This avoids long build paths
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT heart rate service from
samples/bluetooth/gatt to subsys/bluetooth/services and adds a Kconfig
entry to enable and configure the service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT Battery service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and
adds a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
For using alpha numeric property values in a devicetree node, we
need to match the values starts with a number. Current scenario will
return the value as a numeric literal if it starts with a number. This
will not work for a compatible like, "96b-ls-con" which is proposed in
issue #15598.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use an assert to catch the situation where we can't find a port
to use for the reset line pin, since it shouldn't really happen.
The case where reset_pin_configure() is executed but no reset
line is selected can't happen due to static asserts in `integrity.c`
that enforce a reset line to be selected when the reset pin
functionality is enabled.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Current implementation of LwM2M engine doesn't allow users a way
of overriding TLS credential load with custom function. This
would be needed by an offloaded TLS stack where we don't want
to use standard Zephyr functions.
Let's add a load_credential function pointer to the LwM2M client
context which will be called when it's available.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17408
Signed-off-by: Michael Scott <mike@foundries.io>
This fixes the following error:
passing argument 5 of ‘fsutil_read_file’ from incompatible pointer type
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This patch updates the GAP ICS to 7.4.1.
It updates the Bluetooth Spec to 5.1 and added missing ICS tables.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
This commit contributes the basic testing for
k_float_disable() API, for ARM and x86 ARCHes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make fp_sharing a 'parent' test suite directory, and
rename the original fp_sharing test into
tests/kernel/fp_sharing/generic. In this
way more FP-related tests can be grouped
together in the same test directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For the x86 architecture the z_arch_float_disable() is only
implemented when building with CONFIG_LAZY_FP_SHARING, so we
make z_arch_float_disable() return -ENOSYS when we build with
FLOAT and FP_SHARING but on an x86 platform where
LAZY_FP_SHARING is not supported.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The implementation of z_impl_float_disable was missplaced
inside the #ifdef SPIN_VALIDATE. Fixing it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
