Add a new DTS/binding parser to scripts/dts/ for generating
generated_dts_board.conf and generated_dts_board_unfixed.h.
The old code is kept to generate some deprecated defines, using the
--deprecated-only flag. It will be removed later.
The new parser is implemented in three files in scripts/dts/:
dtlib.py:
A low-level .dts parsing library. This is similar to devicetree.py in
the old code, but is a general robust DTS parser that doesn't rely on
preprocessing.
edtlib.py (e for extended):
A library built on top of dtlib.py that brings together data from DTS
files and bindings and creates Device instances with all the data for
a device.
gen_defines.py:
A script that uses edtlib.py to generate generated_dts_board.conf and
generated_dts_board_unfixed.h. Corresponds to extract_dts_includes.py
and the files in extract/ in the old code.
testdtlib.py:
Test suite for dtlib.py. Can be run directly as a script.
testedtlib.py (uses test.dts and test-bindings/):
Test suite for edtlib.py. Can be run directly as a script.
The test suites will be run automatically in CI.
The new code turns some things that were warnings (or not checked) in
the old code into errors, like missing properties that are specified
with 'category: required' in the binding for the node.
The code includes lots of documentation and tries to give helpful error
messages instead of Python errors.
Co-authored-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
--deprecate-only sounded like a command to "only deprecate (something)"
to me at first. --deprecated-only might make it clearer that it's about
only generating deprecated stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
User mode is only allowed to induce oopses and stack check
failures via software-triggered system fatal exceptions. This
commit forces a kernel oops if any other fatal exception reason
is enforced.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
User mode should be able to successfully induce a kernel
oops, or stack check fail fatal error. The latter is
required by compiler stack canaries.
User mode should not be able to induce a kernel panic, or
fake some other kind of exception.
Currently supported on ARM and x86 platforms.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The macro, toolchain_cc_produce_debug_info, adds the compiler specific
flag for enabling the production of debugging information in the
toolchain native format.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Up to now, the only SOC that was supported in the STM32L496 series was
STM32L496XG with flash of 1MB. With the recent support of STM32L496XE,
this implementation is not correct. This patch adds support for the
other SOCs that come with flashes of 512KB and 256KB.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Make use of the new flag introduced in nrfx v1.7.2 that suspends
transfers, in order to properly handle scattered I2C transactions,
especially to perform i2c_burst_write() in the way expected by
display drivers, i.e. as a continuous transaction on the bus,
without the repeated START between its two parts.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This introduces a new flag (BT_GATT_SUBSCRIBE_WRITE_PENDING) which is
set when a write operation requires canceling before the parameters can
be reused.
Fixes#17534
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a dummy cancel request which is used instead of NULL when
clearing and outstanding request thus prevent new request to take
place before a response is received while allowing the original request
to be reused.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mcumgr is missing dependency on net_buf, which is used for SMP protocol
implementation. This causes build failure in case when only SMP over
shell is selected (CONFIG_MCUMGR_SMP_SHELL=y).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
flash_img subsystem writes data to flash only when the amount of data to
be written is larger than available buffer space. This commit modifies
this behavior to write data to flash as soon as the buffer is full.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
base64_decode requires 'size_t *olen', but '*int' was passed
instead. This caused a -Wincompatible-pointer-types "note: expected
'size_t *' {aka 'long unsigned int *'} but argument is of type 'int *'"
warning in qemu_x86 build. Fix that by using correct variable type.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This commit enables the CAN shell for the sample code.
Also, the device shell is activated to find the proper device-name.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Implement a CAN shell. With this shell you can send messages,
attach and tetach filters.
Messages that match the attached filters are printed to the shell.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
As we now have PPP support, use more generic "serial-net" string instead
of "slip" when setting what kind of networking the board supports.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must discard the received Discard-Request silently.
See RFC 1661 chapter 5.9 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only net-shell calls net_ppp_ping() command, so make
it return the amount of time that it took to receive Echo-Reply
so the net-shell can print the round trip time value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network interface is point-to-point one which does
not need IP address etc, then no need to start DAD etc for
those interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a protocol that we do not currently handle, then
return Protocol-Reject to peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default PPP is started immediately when the network interface
goes up. This can be problematic especially when debugging the beast
so allow user to delay the startup.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These additional configs should have been put in prj.conf
and not here. Makes the tests simpler to build correctly
outside of sanitycheck.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
HSEM_CR_COREID_CURRENT was used as process number parameter in
LL_HSEM_ReleaseLock function. While this is working, this
define should not be used in this context.
Also, process number parameter is actually proposed in case of HSEM
use in inter-process context but is not required for inter-core
resource lock. Replace HSEM_CR_COREID_CURRENT with 0.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This will list all mount points in response to opendir("/").
This isn't perfect; mount points in subdirectories will show up as
their full path in this listing. But it's better than just returning
-EINVAL.
Signed-off-by: Jim Paris <jim@jtan.com>
In order for CMake and Python to interact correctly when the former
invokes the latter, ensure that Python uses UTF-8 encodings when
interacting with stdout and stdin on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
