Add "#address-cells" and "#size-cells" to the fixed-partition binding as
these are properties that may existing in the fixed-partition node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Change pwm device bindings to include both base and pwm.yaml. This
allow for flexibility for any nodes that might not need/utilize the
base binding.
* Added pwm.yaml to a few device bindings that were missing it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a clock.yaml that clock controller bindings should inherit
from. clock.yaml defines the properties "#clock-cells" which all
clock controllers should have.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't want any defines generated for the boolean
'gpio-controller'. So skip it in write_props if we see it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a gpio.yaml that GPIO controller bindings should inherit
from. gpio.yaml defines the properties "gpio-controller" and
"#gpio-cells" which all gpio controllers should have.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't want any defines generated for the boolean
'interrupt-controller'. So skip it in write_props if we see it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a intc.yaml that interrupt controller bindings should inherit
from. intc.yaml defines the properties "interrupt-controller" and
"#interrupt-cells" which all interrupt controllers should have.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is safer now that bt_conn_create_pdu can return NULL when using
syswq which can prevent things like signalling of L2CAP and ATT layers.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since TX complete notification are dispatched with syswq blocking on it
can completely deadlock Bluetooth so this attempt to make it safe by
return -ENOMEM if that the current thread happens to be the syswq
thread.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use address based defines in the dts_fixup.h instead of DT_INST_ based
ones. The DT_INST_ will not get us the consistent mapping that is
needed (as we should assume the order of DT_INST_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is to support e.g. "<&adc 3>" in the device tree to create e.g.
DT_FOO_IO_CHANNELS_CONTROLLER = "ADC_0"
DT_FOO_IO_CHANNELS_INPUT = 3
Signed-off-by: Jim Paris <jim@jtan.com>
This is a direct search-and-replace copy of the PWM code.
The name is chosen to match Linux's iio-bindings.txt.
Signed-off-by: Jim Paris <jim@jtan.com>
In nRF9160 the reset pin is a dedicated one, it cannot be configured
as a regular GPIO pin, so this option should not be presented to users
building for this SoC, to not generate confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This driver makes use of the nRF RNG peripheral, so it can be used only
for SoCs that are equipped with one, and not all nRF SoCs are.
The option enabling the driver should then depend on `HAS_HW_NRF_RNG`,
which indicates the presence of this peripheral in a given SoC.
This patch removes also entries disabling this driver in default
configurations for nRF9160 SoC, as these were needed only because
of the invalid dependency of the ENTROPY_NRF5_RNG option.
A minor adjustment of Kconfig files of the nrf52_bsim board was
required as well, so that this board's configuration can properly
handle this corrected dependency.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
according to high-level design,in user mode software-triggered system
fatal exceptions only allow oops and stack check failure
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
exception, different with irq offload, may be raised interrupt
handling, e.g.
* z_check_stack_sentinel
* wrong code
we need to add specific handling of this case in exception handling
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
after appling the new "_get_curr_cpu_irq_stack" in _exc_entry,
the caculation of exception stack is wrong, this will
cause stack overflow, make the exception handling corrupt.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move when we early out for properties that start with # like
"#address-cells" or end with -map like "interrupt-map" to after we do
some error checking. This allows us to check those properties at least
exist if they are required.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The nxp,kinetis-sim is shared by 2 SoC familes and on one of them
its not used for clocks. As such that SoC will not have a #clock-cells
property so mark it optional.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The binding for st,stm32-timers specifies #address-cells and #size-cells
as required but no dts files that have st,stm32-timers specify these
properties. Remove them from the binding.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Code snippets show misleading example of read_callback usage
in h_set handlers.
This patch aligns snippets to implemented behavior.
fixes#15451
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add shell commands to add and remove devices from the shell.
Add commands and options to use whitelist for advertising, scanning,
and creating connections.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add whitelist support in the bluetooth host.
Supported features:
- Advertising with whitelist on scan requests, connect request ,or both
- Scanning with whitelist
- Creating connections using a whitelist (Auto connection procedure).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In order to increase code coverage, we force building a Secure
Firmware image by default (i.e. with option
CONFIG_TRUSTED_EXECUTION_SECURE set), when building for
mps2_an521 board. CONFIG_TRUSTED_EXECUTION_SECURE enables
compiling-in all TrustZone-related code in the tree, that is,
all ARM-specific code inside #ifdef CONFIG_ARM_SECURE_FIRMWARE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables the option to route the BusFault,
HardFault, and NMI exceptions in Secure state, when
building for Cortex-M CPUs with ARM_SECURE_FIRMWARE=y.
This allows the various test to utilize BusFault,
HardFault and NMI exceptions during testing.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This emulates a RISC-V in 64-bit mode on a SiFive FE310 dev board.
Memory is tight so a few tests had to be disabled due to the extra
memory usage compared to qemu_riscv32.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
For now we enforce the medany code model for 64-bit builds as we get
reloc issues otherwise. The instruction set and ABI are also set to
soft-float usage.
The ilp32 ABI is explicitly specified on 32-bit build to make sure
it is not using a wrong default if the same toolchain is used for both
32- and 64-bit builds. The archittecture options are the same as the
SDK's riscv32 toolchain default in that case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support for driving the on-board LEDs present on the NXP TWR-KE18F
development board using FlexTimer (FTM) PWM modulation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Use clock specified in the device tree for obtaining the source clock
frequency for the pwm_mcux_ftm driver instead of relying on having an
NXP Kinetis MCG clock available in all SoCs supporting FlexTimer (FTM)
modules.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit changes the Link-Layer Address Option length calculation
from hardcoded values to a numerical rounding up to full 8.
The length is calculated according to rfc4861 section 4.6.1.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Allow Security level HIGH and FIPS to be initiated when we have received
OOB data for the remote device. The security property of MITM is allowed
if out of band authentication data is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update bluetooth help text to include FIPS level in help text.
Also validate input range for the different connection types
Bluetooth security level for LE is from 1-4, while BR/EDR is 0-3
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Follow the approach of newlib to use a file sys/_types.h to specify the
underlying type for POSIX/libc types that must be provided in multiple
headers. The identifier for this type is in the reserved namespace.
Use this type rather than a specific standard type in all headers that
need to provide the type under its public name.
Remove the inclusion of <sys/types.h> from headers that should not bring
in all symbols present in that header, replacing it with the standard
boilerplate to expose the specific symbols that are required.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
time_t and suseconds_t are defined in time.h and sys/types.h. Handle
the duplication by adding ifdef protection around them similar to what
is being done for other types.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The number of MPU regions appears to be 16 instead of 8,
so we fix that in the board .dts files.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
