SNTP is UDP-based protocol, and thus not reliable. Previously,
high-level aka "simple" SNTP just issues a single request via
the low-level SNTP API. Instead, send multiple requests, starting
with a small timeout, and exponential backoff, repeated within
timeout specified by user in call to sntp_simple().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
CONFIG_COVERAGE is also supported in some real targets now
as described in the doc
https://docs.zephyrproject.org/latest/guides/coverage.html
So let's remove that missleading sentence
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Enables the arm v7m mpu on the lpc54114 m4 core. Reuses the mpu
configuration from the i.mx rt, which has the same mpu.
Tested on hardware with tests/kernel/mem_protect
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This extra step is needed after updating the ci-tools repo now, or the
latest tests won't run.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Things that parse generated_dts_board.conf can't deal with entries
like:
DT_GPIO_KEYS_BUTTON_1_GPIOS={"GPIO_0", 14, 256}
so keep them from being added there.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When a phandle-array (compound) has multiple members generate a define
that says how many there are; generate an initializer for each
individual member; and generate an initializer for the sequence of
members.
This allows drivers that expect multiple values in a compound to process
them without horrendous conditional compilation code attempting to
detect the number of elements in the compound.
It also eliminates the need to repeat the long prefix when initializing
a structure with the fields of a single compound.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The lowest level output function is the one that determines the full
name of the macro, including DT_ prefix. Return the name of the macro
that provides the value for an identifier so that it can be used in
higher layers of the generator.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add str2str to make the conversion of a string into a C literal with all
necessary escapes and enclosing double quotes available outside a
function that emits a define.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The gpio_atmel_sam3 is no longer required since the gpio_sam, common
SAM family GPIO driver, provides improved functionality.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update configuration of arduino_due board to use a common gpio_sam
driver rather than sam3x specific gpio_atmel_sam3. The gpio_atmel_sam3
driver is going to be deprecated.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
- prefix SOC_SERIES_ defines with CONFIG_
- exclude pull down configuration on sam3x series
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
stm32mp157c_dk2 Arduino header lack A2 and A3 pins which
are assigned to non GPIO pins.
Remove optional shields properties that are using one of these
pins by providing board overlays to the impacted shields.
Fixes#19079
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Rename doc/nucleowb55rg.rst to doc/nucleo_wb55rg.rst so the file name
matches the name of the board it is documenting.
Signed-off-by: Robert Weber <robertweber95@gmail.com>
The driver for STM32's independent watchdog already exists and is
compatible with the stm32wb SoC. Enable the independent watchdog
for the stm32wb series for use with this driver.
Signed-off-by: Robert Weber <robertweber95@gmail.com>
As recommended in cmake/app/boilerplate.cmake, ZEPHYR_BASE should
be preferred to PROJECT_SOURCE_DIR.
Do the change for all boards still referring to PROJECT_SOURCE_DIR.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
counter_set_alarm and counter_get_user_data have been deprecated for at
least 2 releases. We can now remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we receive a multicast IPv4 or IPv6 packet, then we need to
deliver it to all sockets that have installed a handler for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, they were tested only with CONFIG_NET_SOCKETS_POSIX_NAMES,
but should also work with POSIX subsys. Achieve this by including POSIX
headers in this case.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
* Exlude _m4target from net tests as they assume SERIAL is enabled,
which is not the case (yet).
Fixes: #19065
* Zephyr drivers headers were moved from include/ to include/drivers.
Update pinmux.h path to the new location.
* Add missing status line on joystick_left dts node.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix nucleo_f411re default configuration by deactivating I2C support.
Additionally fix wrong comment and end of file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
iwdg_stm32_install_timeout expects a timeout passed in
milli seconds. As the timeout is defined in micro
seconds in Kconfig.stm32, we need to divide by
USEC_PER_MSEC when CONFIG_IWDG_START_AT_BOOT is
activated because iwdg_stm32_install_timeout makes
the multiplication by USEC_PER_MSEC.
Fixes#18695
Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
Up to now interrupts could be only configured once, with no way to
disable them in runtime.
Allow interrupts to be disabled in runtime and then properly reenabled
on user request. This allows to ignore interrupts when software is not
expecting them.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The LIS2MDL is not a combo device, but pure magnotemeter.
Hence, '-magn' extension is not adding information and can
be removed from dts compatible name as well as binding filename.
Instead specify '-i2c' or '-spi' to distinguish between the names.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
* Add support to search for a board specific shield in
<SHIELD DIR>/boards/<SHIELD>/<BOARD>.{overlay,conf}. So we can
support something like:
x_nucleo_iks01a3/boards/x_nucleo_iks01a3_shub/stm32mp157c_dk2.overlay
x_nucleo_iks01a3/boards/x_nucleo_iks01a3_shub/stm32mp157c_dk2.conf
Fixes#19078
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Fix dir name when shield name doesn't match the dir name. So for
shield 'x_nucleo_iks01a3_shub' we will look in now for
x_nucleo_iks01a3/boards/<BOARD>.{overlay,conf} instead of
x_nucleo_iks01a3_shub/boards/<BOARD>.{overlay,conf}
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move handling for shield boards/board.overlay, shield.conf and
boards/board.conf inside the SHIELD_LIST check.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fatal error reporting now only dumps to the log mechanism,
so enable it in immediate mode for all tests to ensure
that fatal errors are visible and no messages are lost.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These two tests were right at the knife edge of 16kb
on riscv64, and were not building with logging enabled
on that platform.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test for some reason wants to validate that
k_stack_analyze() works when called from the idle thread,
but with a default idle stack size of 256 this just results
in crashes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These functions get called from various places and
we were observing linker errors. Always build the stubs
when userspace is disabled, gc-sections will discard them
if unused anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
