It was reported in the code coverage report that Z_SYSCALL_HANDLER() was
not called by other code, if we run "sanitycheck -p qemu_x86 --coverage
-T tests/kernel/device/".
The root cause is that we include "errno.h", which includes
"include/generated/syscalls/device.h". It causes that the
declare of device_get_binding() in "include/generated/syscalls/device.h"
is marked as "has been called", rather than Z_SYSCALL_HANDLER()
in device.c.
So I remove "#include <errno.h>", which is useless in device.c. Also,
"#include <sys/util.h>" is removed for the same reason.
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
A Kconfig boolean is added to allow users to provide their own
output strings when running tests via ztest.
This allows changing e.g. the PASS/FAIL/SKIPPED strings,
add counters, change separators, and similar.
A test using the feature and relevant documentation is added.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
Adds additional model callback that gets called on node_reset. Will also
erase any user data when this happens.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds user data file in the model settings, allowing each model instance
to store some application specific data without having to reinvent the
settings path encoding for model element/ID combinations. Exposes the
settings_handler interface in the model callback structure and adds a
data store function.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a structure of callbacks for each model instance. This allows for
more flexible model implementations, that can interact with the Mesh
stack without going through the application.
For now, only an init callback is added, replacing the init mechanism in
the foundation models. The init callback does not provide the primary
flag that used to be in the foundation model callbacks, but replaces
this with an inline function in access.h.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
RT SOCs have several memory areas (OCRAMs, DTCM, ITCM, SDRAM, FLASH...)
but only two are selected for FLASH (code) and RAM (data).
It would be good to let the linker be aware about other regions, which
could then be used by drivers or application to create dedicated
sections and relocate memory. For example if we have code in ITCM and
data in DTCM, we still need a dma-able region/section for e.g.
video/camera buffers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add arduino_header support to nucleo f429zi board.
Create a dedicated connector file to hold arduino connector
information for nucleo_f429zi board.
Add missing arduino_spi feature to yaml file.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
When both central and peripheral are supported, one each Rx
node will be needed by connectable advertising and the
initiator to generate connection complete, hence
conditionally set the count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The socket flags are stored in void* so we need to use uintptr_t
instead of u32_t when manipulating the flag variable.
Fixes#19181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_SMP and SPIN_VALIDATE are both not defined the k_spinlock
struct will have no members. The result is that in C the sizeof
value of struct k_spinlock is 0 and in C++ it is 1.
This size difference causes problems when the k_spinlock
is embedded into another struct like k_msgq, because C and
C++ will have different ideas on the offsets of the members
that come after the k_spinlock member.
To prevent this we add a 1 byte dummy member to k_spinlock
when the user selects C++ support and k_spinlock would
otherwise be empty.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Add support to STM IIS3DHHC the ultra-low noise, high-stability
three-axis linear accelerometer.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The $(dt_chosen_label) preprocessor function should be passed
$(DT_CHOSEN_Z_SHELL_UART), not $(UART_SHELL_ON_DEV_NAME).
DT_CHOSEN_Z_SHELL_UART is set right before the Kconfig symbol
definition, to work around the comma in 'zephyr,shell-uart'.
The Kconfig preprocessor functions are defined in
scripts/kconfig/kconfigfunctions.py.
Fixes: #19178
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Refactor to abstract the use of software interrupts in nRF5
Series.
Also, reduce the number of SWI used when interrupt priority
level configured is same for ULL High and ULL Low contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit completes the refactoring of radio.c, so it
calls abstract functions for PPI handling for LE Coded
PHY (e.g. enable, disable channels, or configure endpoints),
which, then, call the platform-specific functions for PPI
handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h, conditionally, if we
build the controller with support for LE Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make the definitions of LE Coded PHY-specific macros
and inline functions conditional, i.e. only if we
actually build the controller with support for LE
Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors radio.c, so it calls abstract functions
for PPI handling (e.g. enable, disable channels, or configure
endpoints), which, then, call the platform-specific functions
for PPI handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines generic macros for the software interrupt
(SWI) IRQ lines that are used for LLL and ULL LOW interrupts.
This is done for both the cases of the legacy and new (split)
controller architectures. In addition, it abstracts some of
the functionality around software-IRQ signals, to generic
functions, which have platform-specific implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Stores friend queue packets unencrypted, removing any out-of-order
issues caused by seqnum allocation. Also moves as much of the metadata
storage as possible into the packet, allowing us to free up some bytes
of net_buf user data for friend packets.
Fixes#18488
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Makes a define for the seqzero 13-bit mask in transport, and exposes it
in the header for use in the friend module.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This reverts commit 0951ce2d34.
This change introduces regression on GPIO interrupts handling
when several GPIOs are configured.
Fixes#19177
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some confluence of recent changes resulted in builds with
application-specific bindings being unable to find bindings present in
the system directory. Add quotes and splits as necessary to propagate
multiple directories through the system.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Not sure why these were formatted the way they were, but I've removed
unnecessary line breaks, embedded control characters (actual embedded
tabs, not escape sequences) and escape sequences.
No functional change.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We don't need to save the ABI caller-save registers here, because
we don't preempt threads from nested IRQ contexts.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The test needs to cram at least 8 messages into the log buffer, but
with 64-bit pointers only 5 fit, so make the buffer a bit bigger.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is a naive implementation which does "eager" context switching
for floating-point context, which, of course, introduces performance
concerns. Other approaches have security concerns, SMP implications,
and impact the x86 arch and Zephyr project as a whole. Discussion is
needed, so punting with the straightforward solution for now.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use the INT_TO_POINTER() and companion macros to silence compiler
warnings about casting between pointers and ints of different sizes.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The CMSIS layer doesn't like large stacks, and x86 in long mode
requires large stacks, so we disable these tests for now (as was
previously done on the x86_64 port for the same reasons).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In long mode, x86 does not support static IDTs or OpenOCD,
so disable the tests related to these features.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These inline-assembly functions are identical between IA32 and
Intel64 arches, so move them to the common arch.h file.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add qemu_x86_long board (with CONFIG_X86_LONGMODE=y) for testing.
This requires adding support to soc/ia32 for long mode (trivial),
and adding a quick 64- to 32-bit ELF conversion before invoking
QEMU, which apparently doesn't like 64-bit kernel files.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
