The API call to close the flash area was only invoked when the flash
area was erased. It should be closed in all paths.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Flash drivers may impose alignment requirements on the destination
buffers due to use of DMA transfers. In particular Nordic QSPI flash
API requires that addresses, sizes, and buffers all be 4-byte aligned.
Align the ready/copy buffer to satisfy this requirement.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Flash drivers may impose alignment requirements on the destination
buffers due to use of DMA transfers. In particular Nordic QSPI flash
API requires that addresses, sizes, and buffers all by 4-byte aligned.
Align the page buffer to satisfy this requirement.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This library supports stream writes to flash with
optinal progressive erase.
This module is a direct copy of the functionality found in
subsys/dfu/img_util/flash_img.c
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Improve hexdump output of shell_hexdump() to match what is currently
printed by LOG_HEXDUMP*() family of functions. That way string buffers
that are sent/received using shell commands can be easily presented
using shell_hexdump() without loosing user experience (with previous
shell_hexdump() that printed only hex bytes) and code validity (printed
buffers are not always NULL terminated with only printable characters).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The removal of mentions of 'ext' from the documentation needs an
adjustment in the Eclipse debugging page, since 'modules' is not a
subdirectory of the zephyr base directory.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The STM32 and CC13xx/CC26xx SPI drivers don't utilize the Kconfig
symbols for per instance SPI anymore so we don't need to set them on the
conf files for this test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
While testing sanitycheck classes, found some wrongly initialisized
variables which caused issues, fixed those..
All Test* classes should now be ignored by pytest and should not be
treated as pytest code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We can utilize the devicetree macros to determine which instances to
enable. This will allow us to phase out the per instance Kconfig
symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the asynchronous UART API testing support on the SAM
E54 Xplained Pro board.
The SERCOM1 module is used as the secondary loop-back UART, which is
required to run this test.
Note that no external UART loop-back connection is necessary to run
this test, because the SERCOM1 UART TX and RX pads are configured to be
internally connected; it is, however, still necessary to configure the
pinmux because the module pads are not connected until the pinmux is
configured.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This reverts commit 90cc723e65.
Using `DMAC_CHCTRLA_TRIGACT_BLOCK` breaks SERCOM UART peripheral DMA
operations (DMA-based asynchronous UART transmit operation only sends
the first byte and does not proceed any further).
The `DMAC_CHCTRLA_TRIGACT_BURST` with `DMAC_CHCTRLA_BURSTLEN(0)` is a
special case utilising the "internal FIFO", according to the datasheet
(see DS60001507E; 22.6.2.8), and should always be specified for
peripheral data transfer operations.
Also it is worth noting that Atmel and other third-party drivers use
the aforementioned "internal FIFO" configuration for peripheral data
transfers as well.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The channel direction for a V1 DMA is not allowed to be memory to memory
and there is a check in place for this. However, the check is being
performed on the stream prior to actually configuring the stream. This
results in the check always failing regardless of the channel direction.
The check has been modified to be performed on the incoming
configuration.
Signed-off-by: Abe Kohandel <abe@electronshepherds.com>
If k_thread_join() was passed with an actual timeout value,
and not K_FOREVER, the blocking thread was not being properly
woken up when the target thread exits. The timeout itself
was never aborted, causing the joining thread to remain
un-scheduled until the timeout expires.
Amend the k_thread_join() test cases to check that the join
completed before the provided timeout period expired.
Fixes: #24744
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
DTLS without peer verification offers no security whatsoever (and is
arguably worse than not using DTLS in the first place).
Change the verification option to require this peer verification. To
use this, it may be necessary to install and use a root certificate.
Signed-off-by: David Brown <david.brown@linaro.org>
Fix I2C bit banging REPEATED START condition function by ensuring both
SDA and SCL are high before generating the REPEATED START.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fix I2C bit banging STOP condition function to not create a stray
START condition if SDA is high on entry. Instead, set SDA to LOW
before generating the STOP condition.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This patch prepares the dma and introduces the dmamux on soc series
which supports this feature for memory/periph transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch introduces the periph to/from memory dma transfer
using the dmamux feature and define new values
for dma cells on client side
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The NRF driver doesn't utilize the Kconfig symbol for per instance I2C
so we can remove setting that in the conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The NIOS2 I2C driver does not utilize Kconfig symbols for per instance
I2C anymore so we don't need to set them in the conf files for this
test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The STM32 I2C drivers don't utilize the Kconfig symbols for per
instance I2C anymore so we don't need to set them in the
conf files for this test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix some wrong assignments for SPI2 and add all other alternative
functions for USART, I2C, SPI and CAN according to STM32F091VC
datasheet, which is at the top end of this series.
https://www.st.com/resource/en/datasheet/stm32f091vc.pdf
Signed-off-by: Martin Jäger <martin@libre.solar>
1. Fix the regular expression used to parse version numbers. This uses
\. and . to parse literal dots; the second one matches any character.
Just use [.] instead in both cases.
2. Don't error out if the installed dtc is too old. It's optional, so
we should just proceed without it. Print a warning instead, and make
it so dts.cmake won't do anything with the installed dtc.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Following other drivers, Kconfig based instances are now entirely
removed. In order to do this change, PWM nodes in board DT files have
been given a pwm{N} label so that both:
- DT API checks such as #if DT_HAS_NODE(DT_NODELABEL(pwmN)) can be
used (N being PWM instance number).
- DT references can be written as pwms = <&pwmN x y>; instead of
pwms = <&{/soc/timers@XXXXXXXX/pwm} x y>;
This approach is also used on the Linux Kernel.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Convert the GPIO bit banging I2C controller driver to use devicetree
bindings for configuring instances.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
