Unused since commit 6fd6b7e50a ("xtensa: remove legacy arch
implementation").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Script to be used when creating a release. For regular releases this can
be called this way:
$ list_issues.py -f issues.md -s 2019-09-01
Will list all closed issues since september 1st, 2019 and will create a
markdown file with all issues that can be added as is to the release
notes.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The valgrind suppression file did not have an owner
That file is only usefull for POSIX arch based boards
=> Adding myself as owner of the file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Defining a symbol with 'menuconfig' just tells the menuconfig to display
any dependent symbols that immediately follow it in a separate menu.
'menuconfig' has no effect on symbol values.
Making a symbol that doesn't have any dependent symbols after it a
'menuconfig' should be avoided, because then you end up with an empty
menu, which is shown as e.g.
[*] Enable foo ---
This is how it would be shown if there were children but they all
happened to be invisible as well.
With a regular 'config', it turns into
[*] Enable foo
Change all pointless 'menuconfig's to 'config's.
See the section on 'menuconfig' on the Kconfig - Tips and Best Practices
page as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
NVS back-end initialization should fetch size of the flash erase blocks
from the flash API instead of DT. This allows to work well when used
storage partition is not located in embedded memory.
NVS back-end sector multiplier configuration was set to 8K as
DT value for native posix targets
flash sector sizes is 1 B, while its flash driver supports 8k.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The CONFIG_* prefix was missing, making the #ifdefs always false.
Found with a script (CONFIG_ENS210_CRC_CHECK was unused).
Also make ens210_crc7() static. Guessing it's unused outside this file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds a preliminary implementation of CMSIS-Core(R) for use
with the ARM Cortex-R port.
At this time, CMSIS-Core(R) is not merged back into the upstream CMSIS
repository and therefore is not available from official sources.
Until upstream merge happens, the preliminary version can be obtained
from the following URL:
https://github.com/stephanosio/CMSIS_5/tree/core_r
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
On processing a DNS server option, which re-initializes the DNS resolve
context, also cancel all pending DNS queries before closing the old DNS
resolve context. Otherwise, `z_clock_announce()` will later work on the
re-initialized context once the queries expire and crash because the
reference to the timeout function `query_timeout()` has been cleared.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection update procedure to be cacheable if any other
local or remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Stops leaking very long source paths in build directories; makes them
deterministic. Finishes what was started in commit b4282bf72d, see
rationale and code reviews there.
See also CMake issue https://gitlab.kitware.com/cmake/cmake/issues/19475
for more details.
Use the opportunity to remove the most obvious duplication.
Test with: sanitycheck -T $ZEPHYR_BASE/tests/subsys/settings/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Was impossible to enable due to a typo. Fix it.
Found with a script (LVGL_OBJ_WINDOW was unused besides
being enabled in tests/lib/gui/lvgl/prj.conf).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Paths like soc//arm/... showed up in the output due to the extra '/' at
the end of the SOC_DIR value. Remove the redundant '/' in SOC_DIR and
other environment variables that get referenced in the Kconfig files.
Kconfiglib never normalizes paths, because it avoids some gotchas, e.g.
with symlinks.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If the ICMPv6 test is run in real hw, we need a bit more buffers
to pass the test.
Fixes#19915
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use same format string when printing information that certain
config option is not enabled. This saves some flash as the
same string can be shared in the shell.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unused since commit 6fd6b7e50a ("xtensa: remove legacy arch
implementation").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused after commit 4973787c10 ("pinmux: Remove the k64 pinmux driver").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move the selection of the IP clock source for the modules in the NXP
Kinetis KE1xF SoCs from being hardcoded in soc.c to being specified in
the device tree.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Added in commit 0e807c3f54 ("drivers: can: Add loopback driver"), then
never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit 0e807c3f54 ("drivers: can: Add loopback driver"), then
never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CLOCK_STM32_PLL2_MULTIPLIER and CLOCK_STM32_PLL2_PREDIV2 were added in
commit e1a90583d4 ("drivers: clock_control: provide LL based driver to
stm32f1xx series"). They have never been used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The lvgl library is configured in some tests to use
the libC malloc to allocate heap. In native_posix this
ends up in the underlying OS heap, which cannot be safely
freed in general when the program finnishes, and
ends up being reported by valgrind as leaked on exit. See
https://github.com/zephyrproject-rtos/zephyr/pull/18471
for a longer discussion.
Instead of trying to fix the leak, let's just accept it
but suppress the errors so it does not confuse other
developers
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Clarify the roles and responsibilities of the Zephyr community
and contributors with respect to PRs, Bugs, and Features.
Signed-off-by: David Leach <david.leach@nxp.com>
Use the base address from the device tree for instance 0 (LPUART0)
instead of hardcoding the address using the NXP MCUX HAL definition.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add missing definitions for the base addresses of the NXP LPUARTs to
the NXP KE1xF SoC DTS fixup.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Duplicate definitions elsewhere have been removed.
A couple functions which are defined by the arch interface
to be non-inline, but were implemented inline by native_posix
and intel64, have been moved to non-inline.
Some missing conditional compilation for z_arch_irq_offload()
has been fixed, as this is an optional feature.
Some massaging of native_posix headers to get everything
in the right scope.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header makes a call to posix_print_error_and_exit,
but pulls in no prototype.
Linker scripts use nothing in this file, move the #ifndef
_LINKER to the toplevel.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
it's bug found after implementing direct irq support,
nsim_hs has the same number of interrupts available
as nsim_em
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add the case for ARC in yaml after dynamic and direct irq are
supported
* fix the bug that index in sw_isr_table should have a offset of
CONFIG_GEN_IRQ_START_VECTOR
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* implement DIRECT IRQ support both for normal irq and fast irq.
* add separate interrupt stack for fast irq and use CONFIG_ARC_
_FIRQ_STACK to control it. This will bring shortest interrupt
latency for fast irq.
* note that scheduing in DIRECT IRQ is not supported.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit introduces the cmake extension zephyr_library_amend.
This function allows for adding files in an out-of-tree Zephyr module
to a zephyr library created in zephyr repo CMake files.
As example:
drivers/entropy/CMakeLists.txt creates an zephyr library as:
zephyr_library()
only available to zephyr itself.
The amend function allows to amend to such a lib, by creating a
CMakeLists.txt file following identical folder structure in a Zephyr
Module:
<zephyr_module_oot>/drivers/entropy/CMakeLists.txt
zephyr_library_amend()
zephyr_library_sources() # Sources are amended to the original library
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Unused after commit 71ce8ceb18 ("kernel: consolidate error handling
code").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Failed unit tests were setting wrong fail string (error instead of
failed) which made unit tests always pass.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds LiteX SPI drivers and its bindings.
Signed-off-by: Daniel Craviee <dcraviee@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Depending on LiteX configuration, CSRs
(control&status registers) might be split
into several consecutive registers.
This introduces common helper functions
for all LiteX drivers providing access
to CSRs for a default LiteX configuration
(data_width = 8bit, bus_width = 32bit).
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
