The Generic FSK controller enables radio operation
using a custom GFSK/GMSK or MSK modulation format
achieved by programming a set of PHY variables such
as BT product, modulation index and modulation filter
co-efficients (such that max frequency deviation
<= 500kHz). Generic FSK mode also offers a highly
configurable packet structure, variable bit rate
transmission and reception, some limited packet
(header) processing, and interface to a RAM-based
Packet Buffer.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
The Generic FSK controller enables radio operation
using a custom GFSK/GMSK or MSK modulation format
achieved by programming a set of PHY variables such
as BT product
This binding describes the devices and its associated properties.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
There are a couple of commits that are needed for
the BLE SW LL to function properly on the VEGABoard:
- TRNG entropy driver
- GenFSK radio enablement + configuration
As such, make sure that the commit in the manifest
points to the appropriate SHA in the hal/openisa
repo.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Re-enable flash, ADC, and CAN related shell commands in the
board_shell test application.
This fixes commit 965aac39b6.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Update the models revision used for building so that nrf52_bsim
can be used with nrfx 2.0.0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Complement GPIOTE HAL function calls with the NRF_GPIOTE parameter.
Update nrfx_gpiote_init() function call with the newly introduced
parameter.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Calls to nrfx HAL functions in various nRF platform related source
files are complemented with pointers to relevant peripherals.
Additionally, TIMER HAL functions that got renamed in nrfx 2.0.0 are
updated in the qemu_cortex_m0 board supporting code.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update calls to nrfx HAL functions to reflect API changes introduced in
nrfx 2.0.0. All these functions are now called with the first parameter
pointing to the structure of registers of the relevant peripheral.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update calls to nrfx HAL functions to reflect API changes introduced in
nrfx 2.0.0. All these functions are now called with the first parameter
pointing to the structure of registers of the relevant peripheral.
Also a few functions got renamed:
- nrf_gpiote_int_is_enabled to nrf_gpiote_int_enable_check
- nrf_gpiote_event_is_set to nrf_gpiote_event_check
- nrf_rng_event_get to nrf_rng_event_check
- nrf_rng_int_get to nrf_rng_int_enable_check
- nrf_rtc_event_pending to nrf_rtc_event_check
- nrf_rtc_int_is_enabled to nrf_rtc_int_enable_check
- nrf_timer_cc_read to nrf_timer_cc_get
- nrf_timer_cc_write to nrf_timer_cc_set
Default configuration values were removed from nrfx_config files,
so the drivers pwm_nrfx and spi_nrfx_spis no longer can use those.
Function nrfx_pwm_init() now takes one more parameter - context pointer
that is passed to the event handler, not used in the pwm_nrfx driver.
HALs for UART and UARTE now allow configuration of the parity type
and the number of stop bits, for SoCs that provide the corresponding
registers.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the driver to support multiple watchdog instances
and add the corresponding Kconfig options.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the hal_nordic module revision to switch to nrfx 2.0.0.
Add Kconfig options that enable to use the newly introduced nrfx
drivers in Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert bmg160 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert bmm150 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert max44009 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert mcp9808 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert sx9500 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert tmp112 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert th02 sensor driver and sample app to utilize device tree.
Introduce a dts board overlay on the frdm_k64f board to ensure we at
least have a single platform in which the sample gets built.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Relates to commit fca32e41e6 ("Bluetooth: controller: Fix
DLE for remote unsupported Coded PHY").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the implementation of slow encryption setup design
alternative to send ENC_RSP PDU before sending REJECT_IND
or REJECT_EXT_IND PDU.
Fixes#19917.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix feature exchange event generation to be correctly
deferred to wait for Rx node availability for cases when
the procedure has already been performed on air.
Without this fix, remote feature request from host may not
get back a HCI event back.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port missing implementation of the slave latency break
when there is data to be sent to peer master. Without this
initial data send from slave is delay by upto the slave
latency number of connection events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a port of the commit 4135fb55f1 ("Bluetooth:
controller: Fix rejected enc procedure not terminated") and
commit 4d59ef306b ("Bluetooth: controller: Check if enc
procedure is in progress").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When calling posix_print_error_and_exit()
a return != 0 was not provided to the shell
This was due to thee way the tracing functions call back
into the main app exit function, assuming that callback
will return.
But in the SOC_INF boards, that function does
not return, and the tracing functions never have the
chance to exit(!=0)
Fix it by calling posix_exit() in the wrap function instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Disallows all unauthenticated pairing attempts made by the
peer where an unauthenticated bond already exists.
This would enable cases where an attacker could copy the peer device
address to connect and start an unauthenticated pairing procedure
to replace the existing bond. Now in order to create a new bond the old
bond has to be explicitly deleted with bt_unpair.
Added option to disable this rule in order to maintain backwards
compatibility in case this behavior is accepted.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit inlines arch_isr_direct_header function that was previously
placed in irq_manage.c for no good reason (possibly in relation to the
FIXME for #3056).
In addition, since the PR #20119 resolved the header circular
dependency issue described in the issue #3056, this commit removes the
references to it in the code.
The reason for not inlining _arch_is_direct_pm as the #3056 FIXME
suggests is that there is little to gain from doing so and there still
exists circular dependency for the headers required by this function
(#20119 only addresses kernel_structs.h, which is required for _current
and _kernel, which, in turn, is required for handling interrupt nesting
in many architectures; in fact, Cortex-A and Cortex-R port will require
it as well).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Need to add the kernel_arch_interface.h header here
to match zephyr.doxyfile.in.
This is the header which contains the formal kernel-to-
architecture interface and we want docs generated for it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove the older time conversion utilities and use the new ones
exclusively, with preprocessor macros to provide the older symbols for
compatibility.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The new conversion API has a ton of generated utilities. Test it via
enumerating each one of them and throwing a selection of both
hand-picked and random numbers at it. Works by using slightly
different math to compute the expected result and assuming that we
don't have symmetric bugs in both.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Zephyr has always had an ad hoc collection of time unit macros and
conversion routines in a selection of different units, precisions,
rounding modes and naming conventions.
This adds a single optimized generator to produce any such conversion,
and enumerates it to produce a collection of 48 utilities in all
useful combinations as a single supported kernel API going forward.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Commit 2d7460482d missed replacing
the path to xtensa_api.h in the intel_s1000_crb soc.c file.
So update it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are not part of the generic kernel to
architecture interface, rename appropriately to
reflect they are ARC-specific.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API was only created to facilitate testing of kernel
objects in IRQ context, never for actual applications.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There is no imx ccm shim driver in drivers/clock_control. This config
was only used to conditionally compile nxp hal drivers, even though the
imx6/7 soc init always needs them.
Updates the nxp hal to unconditionally compile the ccm drivers and
removes the unnecessary config symbol.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adding a Kconfig option for this test to configure the SPI in LOOP
mode. This saves physical wiring for hardware that support it.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Making CONFIG_SPI_ASYNC optional allows the test to be run on devices
where the feature is not yet supported in the driver.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The SPI peripheral should be configured using the CPU clock speed and
not the system clock speed. This used to be fine because they were the
same before #19232, but now that the system clock is RTC-based (which
has a different frequency), we can no longer make that assumption.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
