As implemented this test runs for 20 s with no output, which makes it
difficult to identify the cause of failure. Add output indicating
progress, and emit diagnostics a particular failure observed on iMX
boards.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
/lib/libc/ was listed twice in the file
The first entry was overriden by the 2nd
And so was the case for
/samples/bluetooth/
In this second case, the override lost a user, so add it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Enable SWO debug output during system initialization and not as part of
GPIO driver initialization. After the modification the logger output
becomes available earlier during the boot process. Also, it's not
necessary anymore to build full GPIO driver only to enable SWO. This may
be critical when building small images.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The init macro used outdated spellings for the instance-specific
properties, resulting in build warnings when I2C was enabled.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Provide the mapping from FE310-G002 GPIO pins to the Arduino Uno
headers. Note where pins have pre-assigned functions that may
interfere with use as GPIOs with the default pinmux assignments.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fix the implementation of slow encryption setup design
alternative to send ENC_RSP PDU before sending REJECT_IND
or REJECT_EXT_IND PDU.
Fixes#19917.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds missing items to the list of supported features for all nxp imx rt
boards. These features were already supported, just missing from the
list.
This change increases the number of samples and tests that sanitycheck
selects for these boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Sorts the list of supported features in alphabetical order for all nxp
boards. No features are added or removed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Link to Nordic Semiconductor Infocenter, instead of DocLib
in the documentation for nRF-based Development Kits.
Change Nordic Semi to Nordic Semiconductor in the
DK figure captions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix dependency on the Host to include the PHY update procedure and the
data length update procedure. In a host-only build this feature should
be possible to select without relying on the supported features of the
controller. The host will check support using HCI command to read
attached controller features and commands supported.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Some people are behind firewalls that prevent them
from doing ssh connections.
Change the default BabbleSim fetching instructions to
be over https which should work for everybody.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
It is important to clarify when to launch audio capture command in
order to avoid that initial boot characters enter into the audio
file leading to bad initial data.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
After SanityCheck I found out, that test arch.interrupt
still has same duplicate names.
To get rid of it, I decided to change the duplicate test case name in
arch/arm/arm_interrupt to arch.interrupt.arm since that is not
a generic interrupt test but is ARM-specific.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
A partition start offsets should be expressed relative to the flash
device base address. For cpunet flash partitions start offsets
were improperly expressed as absolute flash address.
This patch fixes partitions start addresses for nRF5340 cpunet.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Removed some cut/paste from mynewt with references to os_callout,
os_event in example snippets.
code examples were also aligned to current settings handle API.
fixes#20743
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We should be adding a compiler barrier for IP register
when we are doing syscall generation on Cortex-M
architecture. The syscall generation itself only
does an SVC trigger; the execution returns to thread
mode and ARM does not guarantee that IP register is
preserved, when we finally get back to the point where
the syscall was invoked. This may be a problem, when
the compiler inlines the arch_syscall_invoke function,
so the IP register may be in use.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the following warning from gcc-9.2:
arm/syscall.h:52:2: error: listing the stack pointer register 'sp'
in a clobber list is deprecated [-Werror=deprecated]
52 | __asm__ volatile("svc %[svid]\n"
| ^~~~~~~
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When building with NEWLIB_LIBC_NANO we need to copy
the globals from libc_nano.a into application memory
partition z_libc_partition, exactly as we do for
libc.a globals. This is required so that these globals
are accessible by nPRIV code, when building with
user mode support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
libc.newlibcnano test-case shall run with user mode
enabled, similarly to the remainder of the test-cases
in the tests/lib/mem_alloc test-suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some minor typo and style fixes in the README file
of tests/lib/mem_alloc test-suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch tests the return code when calling clock_control_get_rate
and completes the issue #20503 seen on watchdog
[Coverity CID :205655]
Fixes#20503
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch tests the return code when calling clock_control_get_rate
and completes the issue #20503 seen on watchdog
[Coverity CID :205655]
Fixes#20503
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch tests the return code when calling clock_control_get_rate
and completes the issue #20503 seen on watchdog
[Coverity CID :205655]
Fixes#20503
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch tests the return code when calling clock_control_get_rate
and completes the issue #20503 seen on watchdog
[Coverity CID :205655]
Fixes#20503
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix GCC9 warning "warning: taking address of packed member of
'struct sc_data' may result in an unaligned pointer value"
Issue is that the on-air structure of sc_data was re-used for the gatt
service changed data.
Added build assert because data is stored in settings, so the structure
should be the same size to be compatible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We already returned out of the function if err is nonzero, therefore it
is impossible to reach this return statement.
Coverity-CID: 205612
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The routine to read the image from the device and upload it to the
host stored data in a buffer unrelated to the one transferred to the
host, resulting in a corrupt image.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
As noted in the issue #20666 discussion, though the console is not used
by this sample app, it can't really be "disabled" using this Kconfig
option, so remove the CONFIG_SERIAL=n line.
Fixes: #20666
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Renode 1.8 introduced a behaviour change in which it automatically
launches the telnet monitor on the TCP port 1234 by default.
In order to prevent sanitycheck failures from multiple renode instances
attempting to listen on the TCP port 1234 simultaneously, this commit
disables renode telnet monitor by specifying '--port -2' (a negative
number lower than -1 is required to disable telnet monitor because of
the way renode command line parser is implemented).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Test that meta-IRQ returns to the cooperative thread it interrupted,
and not to whichever thread is highest priority at that point.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
In some platforms the size of size_t can be different of 4 bytes. Use
sys_rand_get to proper fill this variable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use LOG_DBG instead of LOG_ERR when BME680 chip is detected
and its ID verified successfully.
Signed-off-by: Jan Tore Guggedal <jantore.guggedal@nordicsemi.no>
There were two conflicting entries for sensor samples, which resulted in
the wrong person getting assigned as a reviewer.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
A detailed overview of Zephyr's build system. This is a
thorough view of the low level build process starting from CMake and
using Make as the build system tool. Things missing here that will be
further documented:
- west
- external modules/libraries
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
STACK_CANARIES relies on random value for the canarie so
ENTROPY_GENERATOR or TEST_RANDOM_GENERATOR needs to be
selected to get sys_rand32_get included in the build.
Fixes: #20587
Signed-off-by: David Leach <david.leach@nxp.com>
Linux btusb driver do not relies on ZLP to determine the
end of a transfer. Instead the data is transmitted
continuously and the driver obtains the length of a event
from the HCI Event Packet header.
Fixes: #20250
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Fix the regression introduced as part of
commit 57d9411837 ("bluetooth: kconfig: disable some
options for openisa/RV32M1").
Also, prior to PR that introduced this regression, the Coded
PHY support selection was incorrectly depending on PHY update
support Kconfig BT_PHY_UPDATE. This was already fixed as part
the previous PR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This command needs access to DT configuration, but can no longer
access it through BuildConfiguration since
9da1d41a12.
Import edtlib and use that instead.
Fix up some other error handling and output issues while we're here to
make the script's behavior easier to inspect and debug.
Fixes: #20545
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
