Instead of having all (=addr NULL or BT_ADDR_LE_ANY to bt_unpair) as a
special case, iterate over all connected peers and unpair them the
regular way. This means bt_gatt_clear is called too. Doing this way
allows us to remove a lot of (now) unused code as well.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Make sure light sleep hook function is compile when needed
This solves linking error for shippable test that only enable
light sleep.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
The test name did not reflect the purpose of the test.
Also add "poll" tag so that we can more easily launch just
this test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we can write to the socket in POLLOUT, then there is no need to
wait.
Note that this is not a full POLLOUT implementation but prevents
the code from waiting even if we could send data out.
Fixes#18867
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to supply 0 events in which case the function just
does the sleep. This is useful so that the caller does not need
to create artificial events.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
'category' is deprecated. See commit fcd665a26c ("dts: bindings: Have
'required: true/false' instead of 'category: ...'").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This patchset enables USART3 on the 96Boards STM32 Mezzanine.
It is broken out to J10 Grove Connector.
Changes:
- Enabled USART3 in board dts.
- Updated board index.rst with uart pinouts.
- soc dtsi: enabled usart3.
Test: Tested USART3 as console at 115200 baud
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
Makes it much easier to inspect them in a different terminal
from where the test was run. These paths tend to be long
anyway, even if relative.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Sanitycheck used to delete the output directory if -n
wasn't used, but now it renamed it. Add a new flag to
enable the old behavior.
Do not use logging for these early messages, logger
hasn't been set up yet.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The code has a lot of sys.exit() calls, but internally these
just raise a special exception. Add a try...finally block
to ensure 'stty sane' is run before leaving the script.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly-introduced SPI_MCUX_FLEXCOMM
symbol.
Also clean up the header to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The HAS_IMX_{RDC,CCM} symbols were added to ext/hal/nxp/imx/Kconfig in
commit 3afc2b6c61 ("ext/hal/nxp/imx: Import the nxp imx7 freertos bsp"),
and later copied over to modules/Kconfig.imx in commit 12438e1047 ("ext:
hal: Make NXP HALs a Zephyr module").
Never used.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Prior to this all hex files included in a merge would
be printed on every invokation of cmake.
Allow the user to explicitly require this information
by moving the print to a VERBOSE-only cmake message.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This patch adds a temporary workaround for the incorrect initialization
of the SystemCoreClock global variable that is done for the application
core of nRF5340 (see system_nrf5340_application.c) and that results in
k_busy_wait() producing delays of twice the requested time.
The problem is that the call to SystemCoreClockUpdate() that is done
at the end of SystemInit() correctly sets the value of SystemCoreClock
to reflect the hardware state after reset (HFCLK128M divided by 2),
but then the SystemCoreClock variable is initialized (by z_data_copy()
called from z_arm_prep_c()) to the __SYSTEM_CLOCK value that is defined
as 128000000. This in turn results in nrfx_coredep_delay_us() (used by
k_busy_wait() by default for nRF SoCs) delaying for twice the requested
number of microseconds.
The temporary workaround is to call SystemCoreClockUpdate() at a later
stage of the system initialization, in its nRF53 specific part.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Pass the scanner LLL context in the generated connection
complete event with unknown connecion id for HCI Create
Connection Cancel Command Response.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Directed advertising timeout released PDU Rx quota which it
should not be.
Relates to assert in #21006.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Same deal as in commit 41713244b3 ("kconfig: Remove '# Hidden' comments
on promptless symbols"). I forgot to do a case-insensitive search.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
hdr->length is the length of the payload, it should be
buf->len - sizeof(*hdr) - 1 or buf->len - (sizeof(*hdr) + 1)
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
The upper transport layer is using big endian ordering. The
PreviousAddress field of a Friend Request message should therefore
be converted to native endianess using sys_cpu_to_be16().
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The intention of disabling CONFIG_PRINTK is that all
invocations of it will compile to nothing, saving a lot
of runtime overhead and footprint since all the format
strings are completely dropped; instances of printk()
and related functions are no-ops.
However, some subsystems need snprintk() for string
processing, since the snprintf() implementations in even
minimal C library are too costly in text footprint or
stack usage for some applications. This processing is
required for the application to even function.
This patch continues to have disabling CONFIG_PRINTK to
cause the non snprintk functions to become no-ops, but
now we always compile the necessary bits for snprintk(),
relying on gc-sections to discard them if unused.
z_vprintk() is now unconditionally defined in the header
since it is not tied to any particular output sink and
is intended for users who know exactly what they are
doing (it's in zephyr private scope).
Relates to: #21564
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We have a collection of python scripts that are part of our build
system. This PR collects docstring comments added to these scripts into
a summary document. Previous references to just the script name in
other documentation are updated to point to this build tool
documentation.
Some of the scripts needed an update to be processed (via include
directives) consistently.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move adafruit_2_8_tft_touch_v2 to Kconfig.defconfig format.
As part of this change Kconfig flags SPI and DISPLAY are removed
from the shield configuration as they are part of application
configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move dfrobot_can_bus_v2_0 to Kcondig.shield foramt and as part of
this change introduce nrf52_pca10040 board specific configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move link_board_can to conditional Kconfig.
As part of this change, some board specific symbols are moved
to reel_board specific file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move sparkfun_sara_r4 to conditional Kconfig.
As part of this change, remove disco_l475_iot1 specific configuration
as it is already part of board default configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Factorize definitions for ssd1306_128x32 and sd1306_128x64 shields
and move to conditional Kconfig.
As part of this change, direct drivers Kconfig symbols enabling
(I2C, SSD1306) are removed as they are application responsibility.
Also disabling SSD16XX is removed as SSD16XX should not be enabled
by default.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move wavehare epaper shields to conditional Kconfig.
As part of this change, direct drivers Kconfig symbols enabling
(SPI, SSD16XX) are removed as they are application
responsibility. GPIO is removed as well as it should be 'y' by
default on all boards according to Default board configuration
guidelines.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
It is actually possible to use several shields in the same project.
Reflect it in the shields documentation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Put shield configuration Kconfig flags in new Kconfig.defconfig.
This way shield BLE subsystem can now be selected by application
using NETWORKING symbol, similarly to what is done when modem is
directly present on board.
Additionally, move board Kconfig files to a similar scheme where
shields related Kconfig flags are made available under shield,
board and NETWORKING symbols.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Put shield configuration Kconfig flags in new Kconfig.defconfig.
This way shield BLE susbystem can now be selected by application
using BT symbol, similarly to what is done when BlueNRG ship is
directly present on board.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To make use of shields Kconfig.defconfig, parse these files
and newly created Kconfig.shield files which will define the
SHIELD_XXX Kconfig symbols that will be used for conditional
configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add shields_list_contains Kconfig function which return bool based on
check of shield presence in cmake SHIELD_AS_LIST.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For application portability, it is required that feature activation
is made conditional in shield configuration. This way features remain
controlled on application side.
To enable this we need that list of user activated shield is made
available to Kconfig.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
