Use CONFIG_SOC_FAMILY for the top level SoC family. A family
will have different SoCs or different SoC series with multiple
SoCs.
Adding the Family string to the config variable to avoid confusion
between actual SoCs and families and to prevent name collisions.
Change-Id: Ic99a2c1df7850dee3a45641027af82464dd6fadb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Note that the failure case can only be reached when PCI is enabled.
Otherwise, the if-block is always false, which reduces code size
for non-PCI platforms.
Change-Id: I1f9def66b2ce7f08fc13b8f03e675ce4cd469e6d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the assignment of driver_api to just before
the init function returns. This is in preparation to
make device_get_binding() return NULL if driver
initialization fails.
Change-Id: Ibf08cb107885da7c1037c6e7d207530e1a4708f8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The D2000 CRB is similar to the Arduino 101 (at least as GPIO is
concerned). Add support for using the GPIO controller without QMSI
libraries.
Change-Id: I001da05c9a9d5771b2ec678a9d4a91c44db05289
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib7e0b81b2df1a0225fc244fea3035416d0a4f282
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib8158f00a6c6616360ddbcf63981f1a85911c1b9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Current interrupt status tells which pins triggered this interrupt, thus
the handler should acknowledge only these and not all possible, since we
don't know if other gpio controller interrupts are being taken care of
at the same moment.
Change-Id: I7d3f1bb13bb293f7b7ce9b5a717a37bbdd4e4e42
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
The base address and IRQ line are static per SoC, so there is no need
to make them configurable in Kconfig.
Change-Id: Ib78401ff136c29642356f5bda9d6cd3e5c98bece
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added device power management hook infrastructure. Added
DEVICE_INIT_PM and SYS_INIT_PM macros that creates device
structures with the supplied device_ops structure containing
the hooks.
Added example support in gpio_dw driver. Updated the sample
app and tested using LPS and Device Suspend Only policies.
Change-Id: I2fe347f8d8fd1041d8318e02738990deb8c5d68e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Build with GPIO port E failed due to a missing comma.
Change-Id: Ib8fa7f4d03ed4f4c713a3a8a16ad3b37fcf6b0b7
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This moves the STM32 based boards (Nucleo F103RB and STM32 Mini A15) to
the "new" pinmux model.
Change-Id: I190df271a6b83fafeec0b281cd4ee7cf13d7e7db
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This patch fixes gpio_stm32 driver since it was merged with a few
occurrences of DEV_* error code.
Change-Id: I025e4f83d8ca07bc0fed7d3dcb9cce3b9d11c3fc
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Makes K64 gpio driver submenu available only if K64 soc is
selected.
Change-Id: I4097006a4dca718ed2da730fa85cd2ad9970f419
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Moves STM32 gpio driver under its own submenu, like atmel SAM3
and K64 gpio drivers.
Change-Id: Iebc474af9818a73275f99183d3f4788eea1e6ded
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This patch fixes the gpio, i2c and watchdog shim drivers so they set the
CLK_PERIPH_CLK bit during driver initialization. Differently from Quark
SE, the peripheral clock gate bit (CLK_PERIPH_CLK) is not enabled by
default in Quark D2000. We have to explicitly set this bit in order to
properly initialize the device.
This issue has been masked so far because the CLK_PERIPH_CLK bit is set
when UART NS16550 driver is enabled. The UART NS16550 driver is enabled
by default for Quark D2000 so gpio, i2c and watchdog sample apps were
working just fine. But if we disable the NS16550 driver, these samples
applications stop working.
The remaining shim drivers already set the CLK_PERIPH_CLK bit during
initialization so there is no need to fix them.
Change-Id: I3f658da564f87e9d52092ce7aac423c7b3e0c890
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Add support for interrupts for input GPIO pins on STM32 MCUs. The SoC
support code is expected to provide an implementation of
stm32_gpio_enable_int() call.
Change-Id: I61bae54b8e044be4d7d8eb60c0c67b71f8c59553
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
The driver implements a GPIO device interface for STM32 MCUs. Each SoC
must provide implementation of the follwoing calls:
stm32_gpio_flags_to_conf(), stm32_gpio_configure(),
stm32_gpio_set(). Consult gpio_stm32.h header for details on semantics
of these calls.
The driver registers 5 devices, each corresponding to a single GPIO
port. The users can then access individual pins by using values
0-15.
Change-Id: Id236b5b75c9dd091018a50a7be3501c8591cd551
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
() Moves config options for each controllers into their own
Kconfig files. This keeps drivers/gpio/Kconfig from getting
too big.
() Options for each controller are moved under their own
submenus.
() Re-named the device names to standard as "GPIO_0", "GPIO_1",
etc.
() Adds the missing copyright to Kconfig.atmel_sam3.
Origin: refactored from existing file
Change-Id: I7c531b0109ca5a6840d3abd9daa6bc784f15233d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch replaces all occurences of the macro DEV_NOT_CONFIG by
-EPERM at the driver level. This patch is part of the effort to
transition from DEV_* codes to errno.h codes.
Change-Id: I3054c8aa76319a58a2eec089b8a72bf301c85391
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_NO_SUPPORT by
-ENODEV at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I03007527367b03e6fd72a85004b7d3b81046a6a6
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_CONF by
-EINVAL at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: Idae0d5af8dd780416977c9261a5fb6188c3aab64
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_OP by
-ENOTSUP at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I46aec3c65963018c479b01602e4a3eec8650eaff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_FAIL by -EIO
at the driver level. So this patch touch the files under drivers/,
include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I0594ab5dbe667e074c250129e7c13ce512ac940f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The DesignWare GPIO options should really depend on whether
GPIO_DW is enabled.
Change-Id: I98b2964d6a0afdac89dc66a78342076afa6feec5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Interrupt and callback function support is added to the K64F GPIO driver.
The implementation is based on the Designware GPIO driver (gpio-dw.*).
Change-Id: Id88d06f748400f8f822ca98e098cb44a53678c38
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
K64 pinmux support is created as a normal driver.
As opposed to the Galileo board, the pin configuration options are
defined by the MCU and are not board-specific. Separate
platform/board-specific configuration code uses the pinmux driver for
the default pin settings. For FRDM-K64F, only the Arduino pins (22 of a
possible 160) are set up.
Some of the I/O pins routed to the Arduino header are also configured as
JTAG/SWD signals by default and are used by the OpenSDAv2 debug
interface. Therefore, a PRESERVE_JTAG_IO_PINS config option was created
for the FRDM-K64 platform to prevent the default pin settings from
re-configuring these pins.
The K64 MCU separates pin configuration and control, implemented in the
pinmux driver, from GPIO. This results in some cross referencing
between the K64 GPIO driver and the K64 pinmux driver due to the
dependencies of one on the other.
This pinmux driver also uses the expanded pinmux function/mode parameter
size to describe pin configuration options with bit fields for the K64,
including up to 8 pin functions, plus interrupt, pullup/down, drive
strength, open-drain and slew rate.
The following GCC warnings in the K64 pinmux driver are prevented when not
compiling with 'no-optimization' (-O0):
warning: 'gpio_dev' may be used uninitialized in this function
[-Wmaybe-uninitialized]
Change-Id: Ie5031d18750143bf895883058b3cd55fd9989fd3
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
Basic driver support for the Freescale K64 GPIO module.
Note that only pin direction, read and write are supported.
Change-Id: I6587bb260197a00497be9ac991002e3dde54718d
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
This patch removes the default value from some platform/SoC specific
options which are declared in drivers/gpio/Kconfig because 1) most of
the time they are not valid values and 2) the correct values are
already set in the SoC Kconfig.
It also moves the interrupt priority definition from the driver's
Kconfig to the platform's Kconfig since it is a platform-specific
configuration.
Change-Id: Id00f7907fa55025011dabce6e282a9623be23831
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch fixes the GPIO QMSI shim driver so we are able to use it in
Quark D2000 based platforms. To enable this driver we have to add a few
#if guards because some macros and functions (e.g. QM_AON_GPIO_0 and
qm_aon_gpio_isr_0) are not defined in QMSI headers from Quark D2000
(this SoC doesn't support the Always-On GPIO controller).
This patch also adds the QMSI driver default options to arch/x86/soc/
quark_d2000/Kconfig.
Change-Id: Ia16a345e1de3008f167ed66f891834607c05f4a2
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This handling is already done by QMSI, so no need for it to be done in
Zephyr side as well.
Change-Id: Ia5c6206d3d7f04702e0be0e76f2130df8d60b31c
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds support to the AON GPIO controller using the QMSI driver.
In order to enable it, the following configuration options must be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="PATH TO LIBQMSI"
CONFIG_GPIO_QMSI=y
CONFIG_GPIO_QMSI_AON=y
Change-Id: I5a1a232d97741ad7fdbf40d8aea5a835e5b4e724
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Looking at all structs as to where we can pack them a little better, and
calling out the padding/stride at the end for future expansion.
Change-Id: I4a651092e950dd3d915af9fa0ee0d7d59803e58f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For QMSI drivers with combined interrupts, we need to use level
triggered interrupts. This is the case of the GPIO controller.
If we keep it configured as EDGE, the user will never be able to
get a pin configured as LEVEL to fire more than 1 interrupt.
Change-Id: I36bffc79183ca97f431c4f5811ed5d56e2fd82e8
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
The PIO controllers on Atmel SAM3 family processors can be
used for GPIOs, so this is the driver.
Change-Id: I3d5712f3a0a71025b820ca1c08dd767ee1e136d8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename them to DEVICE_NAME_GET and DEVICE_GET to fit in the 'device'
namespace.
Change-Id: I407a7f284ed4d1c071961b46615eea859c2e825f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Introduce the GPIO QMSI-based implementation. This is basically a
shim layer that implement's Zephyr's GPIO APIs on top of QMSI drivers.
This is an alternative driver that conflicts with the previous
GPIO_DW implementation. In order to enable it you must set:
- CONFIG_GPIO=n
- CONFIG_GPIO_QMSI=y
- CONFIG_GPIO_0=y
- CONFIG_QMSI_DRIVERS=y
- CONFIG_QMSI_INTALL_PATH="PATH_TO_QMSI"
Note that this driver currently only supports one controller instance,
GPIO_0. It is implemented this way due to a limitation from the current
version of QMSI. QMSI versions later than 1.0 doesn't have this
limitation.
Missing:
- support multiple controller instances (gpio_0, gpio_1, etc);
- enable level triggered interrupts in sync with system clock,
through setting INT_CLOCK_SYNC properly.
Change-Id: Ib61b153dae9741806a9a31d7dc1f82b96d000fbe
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
There is no such thing as "IA" in Quark SE SS as it is an ARC core. Plus
for this very specific feature it does not require the ARC aux regs
instruction to read/write in the given mask address.
And fixing also the CONFIG_ option to check.
Change-Id: I1f63348ec85f6e006795f7641c912a30fc003709
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is valid only for Quark SE and Quark SE SS, where it requires to
unmask the interrupt for each specific controller. Thus making the
function generic, using the parameter as the specific mask base address.
Change-Id: Iea0a412b8d94a1ab5e1f3e339eaf632eacee5797
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Fixes interruption connection parameters, ISR parameter is not null anymore.
Removes irq_connect call that is a dynamic irq api that should not be
used along static irq api: IRQ_CONNECT_STATIC and IRQ_CONFIG.
Change-Id: I232c8562d2dcda3229776b561e2c1f4608a31cdd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The current gpio_dw_initialize implementation masks the interruptions in the line
dw_write(base_addr, INTMASK, ~(0)) to assign api functions and initialize
interrupt vectors and handlers safely. Immediately after this, the driver expects
that gpio_dw_unmask_int(port) unmasks the interrupts. Without this patch that
implementation is empty for the quark se ss board.
Change-Id: Iac84c8807fcadad8c256c3fcaa4ff624b6337bf3
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Use a default priority to avoid Kconfig blocking when priority
is not set in SoC or Board.
Change-Id: I4edda47b955a7ee834f04dc40d0decbd8dee6305
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Need to unmask interrupts for the sensor subsystem.
2. The GPIO controllers need their clock enabled before they can
start sending out interrupts.
3. Setting up ISR on ARC requires usage of irq_connect().
Change-Id: I633b07292f11e5c5e768fc51fabb70769d407609
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move the common #define for IOAPIC interrupt trigger flags out of
platform board.h and into the driver.
Change-Id: Ia0a069464392714f38037841de52e8d265fa4f49
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Now that i2c_transfer/i2c_read/i2c_write are fully synchronous, no need
to use the polling based function.
Change-Id: Ib578cf4a6d72ad0817e1aaeebc7e4dab9f9d293f
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adds io/aux register support for IP configuration.
x86 and ARM configure IP through MMIO register access.
ARC architecture configure IP through io/aux register access.
Change-Id: I4d07b91af09d88b7eb6ac1aa02e875dcd626bd26
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Static irq api expect to have an isr with signature
void isr(void *arg).
This fixes the warning messages due the difference on
the isr parameter.
Change-Id: I64099ce47ba481b40446d5fb7e35fce0e46a9624
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
BIT() is already defined as a generic utility macro in misc/util.h
Change-Id: Ie74bbfe657de5de980439e30b2dcbb9168b69257
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is currently valid for quark_se platform. It's used internally to
suspend and/or resume the gpio controller.
Change-Id: I5147568ba6b0450363566b5f9fd2e8aa7e41df49
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change-Id: Ie58e8611a8fe9edec9ebcb123532a97f396098f4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no such feature per-pin. LS_SYNC is set or unset for the whole
controller.
Change-Id: Ic67048e29a9cc25a19e6a7bcc11d21dd1e65be61
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This platform if actually a subsystem of the Quark SE SoC and is
not standalone. Use a more descriptive name and remove the architecture
from the platform name.
Change-Id: I16b1ab8dd668441683b07fc4512c219924463441
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
SYS_GET_DEVICE() needs the name set in DECLARE_DEVICE_INIT_CONFIG() not
the one in IRQ_CONNECT_STATIC().
Change-Id: Id1ed66953c863531411b34594ffed669ad524ef5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That fixes a build error. Platfom's board.h have to provide such flags
if they enable dw gpio 1 controller.
Take the opportunity to provide the right isr to IRQ_CONNECT_STATIC.
Change-Id: I16900ea04f7f7c5d3c99b93a92b00c1f651494de
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds the register definition for the DW GPIO hardware block.
This set of registers and offsets are specific for the SS
GPIO hardware block in the Quark SE platform.
In particular, the register BOTHEDGE (offset 0x68 in the
main GPIO block) does not exist on the SS GPIO block.
Change-Id: I4e16ec7c8e89015be1fc8bcdb1b7fa5377890b9d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
since we are in the same directory, include the file directly.
Change-Id: I21c959538e4a3d9e3fba99eaa9b09697fffe25b0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Such controller is found in legacy bridge on Intel's platforms. Such as
Poulsbo or Quark x1000.
Change-Id: I30f205f1e73aaa680092e92717fdacbb74046fa3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now make use of sys_io_clear_bit and sys_io_set_bit
Change-Id: I11ebcd8c31d2a4c6d3dac37a0eca0ffcfacead61
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A tiny fix where the pin is the bit position, not its mask.
Change-Id: I4ed8c4b2968ff28b407cab88903351bafe6501ba
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ioapic_mkstub applies only when an IOAPIC is available in the platform.
Change-Id: I40294e4c11ef04739a1ce2146d125f3c5478013d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This patch updates the ISR initialization code to reflect recent
changes in the underlying Zephyr ISR infrastructure. It also adds
assertions to detect failures to lookup device bindings during
initialization.
Change-Id: I4bf1955da44a97f8c2652b96a390804c5cea73e3
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
use gpio_dw instead of gpio_<function>_dw to be consistent in the
driver itself and with other drivers.
Change-Id: Ifb0e50c230f142197eb4b01c1bb4ce1c16e4753f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We now have BIT defined in a header file globally, so lets use it.
Change-Id: Ie7b87478cb5a9e977ec045efa072d28fab86e78b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allows to remove the both edges support from the DW GPIO driver.
Change-Id: I9e39cca320aeac5d10aafe7a83641917ad004fe6
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Changes the default IRQ priority level from 0 to 2 for the following
kernel configuration options as priorities 0 and 1 are reserved for the
first 32 IDT entries.
SHARED_IRQ_0_PRI
SHARED_IRQ_1_PRI
I2C_DW_0_INT_PRIORITY
GPIO_DW_0_PRI
GPIO_DW_1_PRI
SPI_INTEL_PORT_0_PRI
SPI_INTEL_PORT_1_PRI
Change-Id: I0fc821c68156eb1e1fe776b2bd4ff5890bba40e8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This patch corrects gpio_dw_setup to use the MMIO base address
determined by PCI enumeration when that enumeration feature is enabled
instead of always using the default base address specified at compile
time.
Change-Id: If139c40ce30275694e01196a4a4aa529cd714f06
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Change-Id: I34a54230bc4a63c8a4391d03ff530835910c3705
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to have drivers that are usable cross architecture the
signature for IRQ_CONFIG needs to be the same to avoid #ifdef hell in
the driver code based on architecture.
Update the macro and it usage for existing drivers
Change-Id: I22e142b21d4e984add231d1dbd97020e4823985f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The naming convention used in the source is for there to be an
_ and not a - in the file. Fixing GPIO to be consistent with
the os naming conventions.
Change-Id: Ifc4356c14b52e2cc2411a7445b44c7cb57d2765c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Gets rid of the trailing initialization level character from the
name of the device variable generated by the macro, since it serves
no useful purpose. (The linker scripts place the various initialization
sections in ascending order based on the name of the section, so there
is no need to embed the initialization level in the variable name itself.)
Change-Id: I56bb79a513b8f77fb1f3fbaccec14454c2520772
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The newly introduced i2c_poll_transfer() is now used for register
read for PCAL9535A GPIO driver. The old write then read does not
work because every read or write ends with STOP. However,
the chip requires RESTART after writing the register address.
So the new generic transfer function is perfect for this.
Change-Id: I56d7ebe08f68cb04731c72138d60645ef124f65e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If using with shared IRQ, this function will be called by
the shared IRQ driver. So we need to check and bail out
early if the interrupt is not coming from the GPIO
controller.
Change-Id: I4ae925f5fb9a5c32d03a180edc8460e978ec0aac
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Handle only the pins which have been configured to be present on this
controller. Removing an unused #define as well.
Change-Id: I66d3638333f1fcd49b1b4f70a5c9d11dbc538fd0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
On some platforms (e.g. Galileo), the GPIO controller is on PCI bus,
which shares IRQ with other devices (I2C on Galileo). This patch
adds support for utilizing shared IRQ.
Change-Id: I4b44bae15356e4710d54f0343fed1bd27f35e484
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The polling I2C write function guarantees the write operation
is completed. Given that the initialization routine goes through
I2C write consecutively, we want to make sure each write
has been committed.
Also adds code to configure the I2C controller before transfer.
Change-Id: I2c8888e940edd1cb9fb01f03234a731ac991dfcf
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add I/O port access to MMIO-based GPIO driver, in addition to
the existing direct memory access. This extends the driver,
so that it can address the registers through I/O read/write.
Change-Id: I53c74ad76472ac043764e33bfbb77a2bedc427fe
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a Kconfig option to enable NANO_TIMERS for PCAL9535A.
Without enabling nano timers, compilation may fail.
Change-Id: If96358a17b9522f9323f3480b4716c3dfd82a3de
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are devices that need are part of the architecture core the need
to be initialized prior to devices that are integrated around a core
to make up a complete SOC. Namely the interrupt controller in the SOC
must be configured in order to allow the integrated IP blocks drivers
to initialize correctly.
Change-Id: I0a91e08f98516a7b7dd402ffc6494a071f1326b2
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This macro is legacy from an early implementation of the init system
before the pure level was split into early and late phases remove it
now to avoid confusion going forward.
Change-Id: I6720874c840c9e14888fd6f411a8182e7420ca29
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Fixes a build failure in designware gpio driver.
Change-Id: I90a540f56bff17ff56d0315356fde6d6c4d02407
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Register values are now being cached in memory, and are being used in
subsequent writes. This is to avoid reading from registers, as
we know what needs to be written to those registers all the time.
Change-Id: I9b344303c0cb9f28e974514ab674135004f68ea0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The _has_i2c_master() should return 1 if there is an I2C master.
The logic was incorrectly inverted. So fix it now.
Change-Id: Ic4bf44efc1f68644530a275f0c4e454740a2950a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a simple driver for MMIO-based GPIO ports.
It does not trigger any interrupts due to pin level at this moment.
Change-Id: I0c439f221988817e4be72653c68257ef6ace5bde
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the driver for I2C-based PCAL9535A GPIO chip.
This currently only enables minimal set of features of the chip for
very simple input/output operations, and does not support interrupt
yet.
Change-Id: I32ea07a71a38866280a96e68cff49cb0df12b85d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This change puts the DW GPIO Kconfig selections inside GPIO menu.
This also groups all DW GPIO related selections under GPIO_DW.
Change-Id: I776f3f6b89e1a4dc366648f8290abb27de9eceb8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The code fragment to bind the instances of the GPIO driver were being
replicated in every platform_config.c This code is not platform
specific but is driver specific.
All the information required to bind a driver instance comes from
CONFIG_ variables. Having the binding code with the driver code
avoids duplicating the code fragments in each platform where the
driver may be used.
Change-Id: Ie07a3d12d25201e82ce7074455e6c036f463851b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
When configured as GPIO_ACCESS_BY_PIN, the callback should
be called only if the pin is enabled and received an interrupt.
Change-Id: I7addeb57c8d46dddc027e9b82a92654cd210ade1
Signed-off-by: Ricardo de Almeida Gonzaga <ricardo.gonzaga@intel.com>
- Device ID was wrong
- Setting default class id
Change-Id: I9fd1df284eca4067c21beffa7599307a40be5144
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A fix for a mistake introduced in commit 1a7357.
Change-Id: I411937c85f29abb934ae5385f4858950f5d76887
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will enable the possibility to use this driver with Quark X1000.
Change-Id: Ic40b750d608488e97cc7662cad6c6d66dbf428ab
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just to align the code to generic memory mapped registers and bit
operations functions.
Change-Id: I0fe8b3b6687670d0ed0daffe52645ec2c6b4c674
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit fixes the set bit function.
If the value to set is different from zero, then
the indicated bit will be set.
Change-Id: I9c42f683d108b371ca821f446ac5a10541b89b9f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
[DL: captilize commit message title; fixed some whitespaces;
changed the __initconfig_gpio_* from level 0 to level 1,
which is the level of pure_init; and added include path
to board.h; ]
Change-Id: I7eea6a6ca9e4b7cf8d1ccabb57f07f786da93ef0
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>