Rename symbol names with channel/chnl to chan.
Change-id: I196ffea79e7e10b0253363949051fdf82be62cb4
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Because of the way we build we can't expect relative paths back into the
Zephyr code base to work properlly. This just happens to work on some
systems because of the various -I that exist and one hits the right
number of subdirs between it and where the "at.h" lives. Lets instead
add the Zephyr root as a include path and explicit do a relative path
from the root to get the header.
We end up with a build failure with newlib enabled on galileo because it
ends up not having an include path that gets us to the proper spot with
the various ../../.. ...
Change-Id: I48b4dc2dffb76314f380efbcbbe25957ff5e9e07
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the type of int, uint32_t, etc change with newlib we get the
following error:
subsys/bluetooth/host/at.c: In function ‘cme_handle’:
subsys/bluetooth/host/at.c:272:25: error: passing argument 2 of ‘at_get_number’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!at_get_number(at, &val) && val <= CME_ERROR_NETWORK_NOT_ALLOWED) {
^
subsys/bluetooth/host/at.c:46:5: note: expected ‘uint32_t * {aka long unsigned int *}’ but argument is of type ‘int *’
int at_get_number(struct at_client *at, uint32_t *val)
^~~~~~~~~~~~~
We we can easily address by making val a uint32_t.
Change-Id: Ie6988368bd862afd4075baede7cb0a66c1628c18
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Being explicit about the char being unsigned char deals with this.
Change-Id: I348189e1df11a1fcc58e5810b010b602fd2df33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For consistency, "chan" and "param" are used wherever "channel" and
"parameters" are the words in the specification.
Change-Id: I778a8501ae6af991618c14cc6e395d765a9ae102
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add definitions for all LE commands and events added in the Bluetooth
5.0 specification.
Change-Id: Ia6d134a1ada67e98c803bb6a1708c3f4361c3bfb
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix doxygen comment typos used to generate API docs
Change-Id: I3efff6f5fa26f87d1e658d6336fef01ce45f5bb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I94df2e3a2bda248824ed2aeff3dd0eb743f0bf3e
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I248d53000d8e57b902b9a18fdcfc9e995142a8b3
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I6fd5051c99bdcc731740c92001e525349c254d85
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This reverts commit 7b9dc107a8.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: I1d9d797fee47ca266867ae65656c150f8fe2adb2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit da8bff6b20.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: Ibb1fae7500bddb4772b8830d497a0e5f78b44bcc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit e60af3be66.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: I4a57eb2c23cb1b137112224f604602d40c7cce4f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Scanning for typos in comments and strings.
Change-Id: I3d4db89e0824959252c79c19baa50028354247bd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Hex mumeric values directly in the expression were cast correctly
via the t_HEX rule, but ValueErrors would occur if a hex value was
looked up due to the expansion of some environment symbol.
Change-Id: Ia98dfea91eff4ed95778922d38d2967284f4e31b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tickless test dependency on legacy API is resolved, Changing
test directory from tests/legacy/kernel/test_tickless to
tests/kernel/test_tickless/.
Jira: ZEP-2008
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Change-Id: I0b53ae6eff3a915d988d3234592eb5f8b425b371
As part of Zephyr release 1.9 some APIs will be depreciated. This patch
replaces two of such APIs (task_sleep(ticks), sys_tick_get_32()) with
new ones (k_sleep(ms), k_uptime_get_32()).
Jira: ZEP-2008
Change-Id: Ic0e05906dadfb2ddaea9d0a8b738294dc81430f9
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
As test_sleep does not have dependency over legacy APIs.
So moving files from tests/legacy/kernel to tests/kernel.
Jira: ZEP-2009
Change-Id: I2439391ba6d0a194d07a0d1b48911d37b2f493b0
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
As part of Zephyr Release 1.9 some APIs will be depreciated.
This patch replaces APIs related to semophore init, kernel sleep,
task spawn etc.
Jira: ZEP-2009
Change-Id: I1fe09e9592f503c3413d51857fd740703173c042
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Add a sample demonstrating sound output using PWM to a piezo buzzer
connected to the external edge connector port P0.
Change-Id: I8c0902fd935f2eb3b9979476a7540e7a0216ca63
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added test cases to verify tickless idle concepts defined in
https://www.zephyrproject.org/doc/subsystems/power_management.html#tickless-idle
Test points:
verify system clock recovery after exiting tickless idle;
verify slicing scheduler behaves as expected
Jira: ZEP-339
Change-Id: Ic0a86d725e9692aa217375cedc7396372a026a88
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
newlib doesn't implement the internal buffer the same way that minimal
libc does, so only run that check with min libc (ie !CONFIG_NEWLIB_LIBC).
Also, reported the length we did get if the buffer is to big. Finally
include <stdarg.h> since we are dealing with va_lists and such.
Change-Id: I6b23e448e5785df978ac8c2757099e2b8aaace54
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To allow for various libc implementations (like newlib) in which the way
various {u}int{8,16,32}_t types are defined vary between both libc
implementations and across architectures we need to utilize the PRI
defines.
Change-Id: I69e60e3823028389b314adaf6e279fd47fde1182
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To allow for various libc implementations (like newlib) in which the way
various {u}int{8,16,32}_t types are defined vary between both libc
implementations and across architectures we need to utilize the PRI
defines.
Change-Id: Ic4e65db52c8d693228cf80584283d4d06e68b5ad
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To allow for various libc implementations (like newlib) in which the way
various {u}int{8,16,32}_t types are defined vary between both libc
implementations and across architectures we need to utilize the PRI
defines.
Change-Id: Ie884fb67015502288152ecbd64c37961a4f538e4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need to move using the PRI* defines to use newlib as the default libc
as different arch's define various base types like {u}int32_t
differently. To deal with that in a consistent manor we need access to
the defines in most spots for print{f,k} or logging functions.
Change-Id: Ic1fbef75cbaee211803d9aaf506056e5e31e73f3
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need a bit over 32k of memory to build/run the app_kernel benchmarks.
Change-Id: Iddfeb073f8ea87dc6323775a288b83efa88fdaea
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When we build with newlib __printf_like is already defined so we run
into issues. We should include toolchain.h to properly handle this.
Change-Id: Ia961a9f1d3f7bf965e4115eb93a7ba6a62220905
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Being explicit about the char being unsigned char deals with this.
Change-Id: If2416218220ef5b29f1a69470cbcc6b4fd49ef86
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We renamed ztest's assert to zassert and the crc test case wasn't
updated to match so it doesn't build.
Change-Id: I67cd5bb6eef0875f31b8825d5c3aa5e1fa46af04
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add soc_gpio_get(), soc_gpio_debounce_length_set() functions to Atmel
SAM soc_gpio driver.
Change-Id: I541c6fead9a308dd2e67c59dabe67b87cf1628ef
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added serial (UART) driver for Atmel SAM MCU family.
Note:
- Error handling is not implemented
- The driver works only in polling mode, interrupt mode is
not implemented.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1959
Change-Id: I3e770fd1feb2ddf92cf405a9aa17be92eb32e19b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added I2C bus (TWIHS) driver for Atmel SAM MCU family. Only
I2C Master Mode with 7 bit addressing is currently supported.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1866
Change-Id: Ic5aa7b6b21295feccae883d580b38bbeaf2ce291
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add plumbing to build system and SoC level dtsi for the NRF52832 SoC.
We additionally add the necessary yaml files for the UART on the NRF52
SoCs.
Change-Id: I3b4a821b2993827e33d8e84bdbbc759d1521f8bd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_BOARD was set to arduino_101_ble instead of curie_ble. Fix this
so the BOARD_NAME, BOARD, board dir, all are in sync.
Change-Id: I5f2a4f1aeec7c20f042e11b96e1c87883ad4df4b
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce SoC specific config options similar to what exists on NRF51,
this is mostly to help distinguish between SRAM & Flash sizes on
different variants.
Also deleted some unnecessary setting of CONFIG_SOC_NRF528{32,40} in the
board defconfig files.
Change-Id: I3aaedf0c15423ae12636f87b8e6a39070cbb2c6f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
