Remove memory node from skeleton dtsi and add device_type
property in every memory node in soc dtsi files
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This patch add the unit-address component to memory and flash
nodes. According to the DT specification, the unit-address of
a node must match the first address specified in the reg
property of the node.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Converted using the script below with a few manual edits:
from __future__ import print_function, unicode_literals, with_statement
from glob import glob
import email.utils
seen = set()
emails = set()
with open('MAINTAINERS', 'rb') as f:
new = False
for line in f:
line = line.decode('utf-8')
if line.startswith('M:'):
if new:
emails = set()
new = False
print("")
pattern = line.partition(':')[2].strip()
emails.add(email.utils.parseaddr(pattern)[1])
elif line.startswith('F:'):
new = True
pattern = line.partition(':')[2].strip()
if pattern.endswith("/"):
pattern = pattern + "*"
print("%s %s" %(pattern, " ".join(emails)))
seen.add(pattern)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of a configuration options index in "discovered" order
during the walk of the Kconfig files, create the index in alphabetic
order.
Also added a more descriptive name above the displayed table and added
table headings.
jira: ZEP-2310
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Modern GCC can be configured to default to PIE. To support
such toolchains, turn PIE off as otherwise the generated
binaries are broken in multiple ways (e.g. the ELF will have
additional sections that get inserted at end of _TEXT_SECTION
making __data_rom_start point to these sections and not
the data secions).
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Current version of extract_dts_include.py assumes end subnode
of pinctrl is 'pin'. This fix allows having different names.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
def_label generation was assuming node names always have address
(eg: rcc@40023800). This was generating incorrect def_labels
when node names doen't have address (eg: pin-controller)
With this fix, this case is now taken into account
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
patch fix the dead code issue reported by coverity static scan
for gpio driver of cc2650 TI SOC. GPIO_DS_DFLT_LOW macro
is defined Zero, bitwise and with any value would result to
zero,because of which only false condition of if is evaluated
but not the true condition.This is a fix for jira ZEP-2355.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Remove all explicitly defined application state partition child nodes
from DTS flash nodes, in favor of comments noting that they are
reserved for use by the application.
This follows the pattern established in f58b36a ("dts: frdm_k64f: make
application state partition a reserved area"), and fixes an error
introduced in 9f7f83d2 ("dts: 96b_nitrogen: add flash partitions"),
which added both a reserved area comment and an explicit partition
node to 96b_nitrogen's dts.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Remove compatible = "flash" from any node that has it as this doesn't
have any well defined meaning right now. Also update any compatible =
"sram" to be "mmio-sram" (as there's a binding in linux for this).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If IEEE 802.15.4 is enabled, then setup the network settings
automatically so that the device is ready for IP configuration.
This is only done if CONFIG_NET_APP_AUTO_INIT is enabled, which
is currently the default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With introduction of commit "pinmux: stm32: directly return error if
stm32_get_pin_config fails", pin configuration fails when
pins are not configured in pins[] array.
This was the case for configuration UART1 assigned on PB6/PB7.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
'commit
("devicetree: Generate BLUETOOTH_UART ,UART_PIPE etc config from dt")'
created a dependency of selecting UART_QMSI_0 on device tree.
This change is reverted as it incorrect.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
This new image has required python libraries for new build tools that
were converted from C to python.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an initial implementation for the Bluetooth Mesh Profile
Specification. The main code resides in subsys/bluetooth/host/mesh and
the public API can be found in include/bluetooth/mesh.h. There are a
couple of samples provided as well under samples/bluetooth and
tests/bluetooth.
The implementation covers all layers of the Bluetooth Mesh stack and
most optional features as well. The following is a list of some of
these features and the c-files where the implementation can be found:
- GATT & Advertising bearers (proxy.c & adv.c)
- Network Layer (net.c)
- Lower and Upper Transport Layers (transport.c)
- Access Layer (access.c)
- Foundation Models, Server role (health.c & cfg.c)
- Both PB-ADV and PB-GATT based provisioning (prov.c)
- Low Power Node support (lpn.c)
- Relay support (net.c)
- GATT Proxy (proxy.c)
Notable features that are *not* part of the implementation:
- Friend support (initial bits are in place in friend.c)
- Provisioner support (low-value for typical Zephyr devices)
- GATT Client (low-value for typical Zephyr devices)
Jira: ZEP-2360
Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is needed by new python scripts used during the build process. This
is a workaround until we have this library in the docker image.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Kinetis boards now have a makefile variable to select the flash/debug
scripts based on the OpenSDA firmware. Update the general OpenSDA
documentation accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new variable to define which OpenSDA firmware is on the board,
and selects the default flash/debug scripts accordingly.
Sets the default to jlink since the flashing and debugging examples
in the board document were written to use jlink.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new variable to define which OpenSDA firmware is on the board,
and selects the default flash/debug scripts accordingly.
Sets the default to daplink since the flashing and debugging examples in
the board document were written to use pyocd.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new variable to define which OpenSDA firmware is on the board,
and selects the default flash/debug scripts accordingly.
Sets the default to daplink since the flashing and debugging examples in
the board document were written to use pyocd.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new variable to define which OpenSDA firmware is on the board,
and selects the default flash/debug scripts accordingly.
Sets the default to daplink since the flashing and debugging examples in
the board document were written to use pyocd.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new variable to define which OpenSDA firmware is on the board,
and selects the default flash/debug scripts accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds the pyocd target name for the frdm_kw41z board, but does not change
the default flash/debug scripts from jlink to pyocd. pyocd has not yet
tagged a release with kw41z support, so to use it one must build pyocd
from source based on the current master branch (f21d43d).
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update the MCUX I2C driver and related platforms to get their I2C
information from the device tree. We also updated a few of the sensor
drivers found on the FRDM & Hexiwear boards to get their I2C bus name
from the device tree instead of directly from Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds #address-cell, #size-cell properties to
cpus container node and device_type, reg properties to
cpu node.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Enables a usable adc driver instance based on the board design. No
additional pinmux configuration is necessary because a dedicated adc pin
is routed to the board's battery sense circuit. Updates the board
documentation to reflect that the board now supports an adc driver.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables a usable adc driver instance based on the board design and
configures the pinmux to enable the SoC's PTB1 pin, which is routed to
the board's battery sense circuit. Updates the board documentation to
reflect that the board now supports an adc driver.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables a usable adc driver instance based on the board design and
configures the pinmux to enable the SoC's PTB10 pin, which is routed to
the Arduino header A2 pin. Updates the board documentation to reflect
that the board now supports an adc driver.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables a usable adc driver instance based on the board design and
configures the pinmux to enable one adc channel on the SoC's PTB2 pin,
which is routed to the Arduino header A2 pin. Updates the board
documentation to reflect that the board now supports an adc driver.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables a usable adc driver instance based on the board design and
configures the pinmux to enable one adc channel on the SoC's PTB2 pin,
which is routed to the Arduino header A2 pin. Updates the board
documentation to reflect that the board now supports an adc driver.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
If the adc driver configuration is enabled (CONFIG_ADC=y), then enable
the mcux shim driver by default for all Kinetis SoCs.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux adc16 driver to adapt it to the Zephyr
adc interface.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds common and Kinetis-specific adc device tree properties, and updates
all Kinetis SoC and board dts files to include adc nodes.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The Kconfig assumed that there would only ever be one instance of an
adc, but some Kinetis devices have multiple adc instances.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
As I2C_0 (port 0) isn't used on the STM32 platforms we didn't exclude
the related Kconfig options if DTS was enabled. However other SoCs
(like NXP) do use I2C_0 so we need to fixup the Kconfig dependencies
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The address lifetime timer was cancelled always even if the address
timer was never installed.
Jira: ZEP-2397
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
patch adds zephyr,uart-pipe to devie tree as chosen property.
This is added for frdmk64f because sanitycheck test was
breaking with changes of generating configs for UART_PIPE
from device tree instead of Kconfig.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
patch adds zephyr,bt-uart, zephyr,uart-pipe and zephyr,bt-mon-uart
to device tree as chosen property.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
