These are simple tests for net-app testing. These do not try to
actually send anything to net but test mainly net-app setup and
close functionality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no connection to server, then _net_app_select_net_ctx()
will return NULL. This is perfectly fine and we can just continue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the remote address to determine what address family to bind.
This prevents extra context to be created. In order to avoid
parsing the peer address string multiple times, the client
init function is re-factored.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Looking up the PTE flags was page faulting if the address wasn't
marked as present in the page directory, since there is no page table
for that directory entry.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GATT Server:
According to the API, include service declaration user data
points to the first service attribute to include.
bt_gatt_include structure is valid only for client role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This is a USB controller driver for STM32F4xx devices using
the STM32 Cube HAL_PCD framework. This has been tested with
the cdc_acm driver on a 96b_carbon board (STM32F401RE).
This is a refactoring of:
usb: usb_dc_stm: Add support for STM32Cube HAL_PCD USB driver
Signed-off-by: Christer Weinigel <christer@weinigel.se>
[daniel.thompson@linaro.org: Removed STM32F40(157) defconfig changes
together with STM32F4Discovery pinmux and defconfig changes, updated
clock settings and pad configuration to match latest mainline]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[giannis.damigos@gmail.com: Change uint*_t types to u*_t types,
change SYS_LOG_USB_DC_STM_LEVEL to SYS_LOG_USB_DRIVER_LEVEL and
update pinmux to match latest arm branch]
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add pinmux configuration for USB OTG Full Speed.
Ports 11 and 12 use alternate function 10 for DM/DP.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Support new keywords in testcase.yaml that would allow us to inject
configuration options to be merged with default configuration instead of
having to provide a prj.conf for each variant of the test which is very
difficult to keep in sync. Sanitycheck script will create an overlay
file that is merged during the build process.
This is now done using the extra_configs option which is a yaml list of
option with the values, for example:
extra_configs:
- CONFIG_XXXX=y
- CONFIG_YYYY=y
With this option we can have multiple tests that for example run on
hardware with different values. This type of testing is good on HW but
it does not make sense to be built in normal sanitycheck operation
because it will be just rebuilding the same code with different values.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure the multicast MAC address checker checks also
IPv4 multicast MAC address and accepts it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some doxygen directives were missing from dns_pack.h file.
Also make function header documentation look better.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This application does not do anything itself, it just waits
mDNS queries and responds to them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This creates mDNS responder and serves configured IP addresses
to the callers which want to resolve .local addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can configure hostname of the device in Kconfig. This can
be used by mDNS responder to answer <hostname>.local queries.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These headers provide an efficient, inline implementations of single-
and double- linked lists, and thus not threadsafe. They are intended
to be used as internal kernel APIs (and currently for example not
documented at https://www.zephyrproject.org/doc/). However, to avoid
issues when doing kernel programming (e.g. #4350), it makes sense
to explicitly, even verbosely, document these functions as not
threadsafe.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_context_sendto() returns an error if dest address is NULL.
If dest address is available, net_conext_sendto() should be used.
Otherwise, net_context_send() should be used.
Fixes#4347
Signed-off-by: Aska Wu <aska.wu@linaro.org>
With the introduction of CoAP and other protocols, URL parsing is
be needed when HTTP_PARSER is not. Let's split out the existing
functionality of URL parsing into it's own CONFIG and let
HTTP_PARSER use it by automatically selecting HTTP_PARSER_URL when
HTTP_PARSER is enabled.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Add skeleton for HCI vendor extenstions and convert the nRF5x-specific
static address setting to use the HCI VS commands instead.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When a connection is disconnected with outstanding unacked packets, the
Host has no way to signal or acknowledge their processing to the
Controller, since it is illegal to send a Host Number of Completed
Packets command when the connection is not up. Instead, consider the
outstanding packets as acked in order not to affect the correct flow
control.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The feature bits for Proxy and Friend were missing in the composition
data and heart beat messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All sys_slist_*() functions aren't threadsafe and calls to them
must be protected with irq_lock. This is usually done in a wider
caller context, but k_queue_poll() is called with irq_lock already
relinquished, and is thus subject to hard to detect and explain
race conditions, as e.g. was tracked in #4022.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When CONFIG_STDOUT_CONSOLE is not selected, there is no printk()
function. An alternative (printf) must be used.
This fix was taken from tests/crypto/mbedtls/src/mbedtls.c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Both count and period must be non-zero for message publication
Stop publication when count becomes zero
Add count to debug message in hb_publish
Signed-off-by: Steve Brown <sbrown@cortland.com>
User threads can only create other nonessential user threads
of equal or lower priority and must have access to the entire
stack area.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to track permission on stack memory regions like we do
with other kernel objects. We want stacks to live in a memory
area that is outside the scope of memory domain permission
management. We need to be able track what stacks are in use,
and what stacks may be used by user threads trying to call
k_thread_create().
Some special handling is needed because thread stacks appear as
variously-sized arrays of struct _k_thread_stack_element which is
just a char. We need the entire array to be considered an object,
but also properly handle arrays of stacks.
Validation of stacks also requires that the bounds of the stack
are not exceeded. Various approaches were considered. Storing
the size in some header region of the stack itself would not allow
the stack to live in 'noinit'. Having a stack object be a data
structure that points to the stack buffer would confound our
current APIs for declaring stacks as arrays or struct members.
In the end, the struct _k_object was extended to store this size.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We also need macros to assert that an object must be in an
uninitialized state. This will be used for validating thread
and stack objects to k_thread_create(), which must not be already
in use.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to enforce that if the implementation function is inlined,
and we are using a syscall declaration macro where a runtime check
is performed, that all memory access in the inlined implementation
function is done after the user context check is performed.
Fixes bad memory access issues observed due to the compiler fetching
member data from a kernel object when the calling context was in
user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is too powerful for user mode, the other access APIs
require explicit permissions on the threads that are being
granted access.
The API is no longer exposed as a system call and hence will
only be usable by supervisor threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's currently too easy to run out of thread IDs as they
are never re-used on thread exit.
Now the kernel maintains a bitfield of in-use thread IDs,
updated on thread creation and termination. When a thread
exits, the permission bitfield for all kernel objects is
updated to revoke access for that retired thread ID, so that
a new thread re-using that ID will not gain access to objects
that it should not have.
Because of these runtime updates, setting the permission
bitmap for an object to all ones for a "public" object doesn't
work properly any more; a flag is now set for this instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We got rid of letting uninitialized objects being a free-for-all
and permission to do stuff on an object is now done explicitly.
If a user thread is initializing an object, they will already have
permission on it.
If a supervisor thread is initializing an object, that supervisor
thread may or may not want that object added to its set of object
permissions for purposes of permission inheritance or dropping to
user mode.
Resetting all permissions on initialization makes objects much
harder to share and re-use; for example other threads will lose
access if some thread re-inits a shared semaphore.
For all these reasons, just keep the permissions as they are when
an object is initialized.
We will need some policy for permission reset when objects are
requested and released from pools, but the pool implementation
should take care of that.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
