ns16550 was the only driver using those, and now that it properly uses
sys_io.h functions we can remove inByte and ouByte from ia32's board.h
files.
Change-Id: Id2a691b8ecf43baacd64bc9be09feb15ef9eb339
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was badly named: this routine initializes what cannot be done
statically, i.e. what has to be done dynamically.
We also do not have concepts of "node" anymore since the kernel is
single-node only.
Change-Id: Idde3183ca01ca3f70c5ae0e948734a965582ded8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When THREAD_MONITOR is enabled, not removing the fiber from the thread
list (a) would cause the list to be erroneous, and (b) would cause
corruption of the list if the fiber stack was reused to start a new
fiber (or any other usage really).
Change-Id: I622ffdbd146ec4b0e78b051d1b444fdf35efcd1e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Update the documentation of _thread_exit() to reflect the fact that a
task can call it if it does so with interrupts locked. A task or another
fiber cannot preempt a fiber, so a fiber can still call _thread_exit()
without locking interrupts. If a task locks interupts first then calls
it, no fiber or other task can preempt it either.
Change-Id: If8624842fc202a0917b0499458e14f95d7f461df
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will let us getting rid of old outByte/inByte functions.
Change-Id: I3344151c54f99e5e281ac8d3d027e0b810796111
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Grammar updates.
Corrected formatting to produce cleaner HTML output
Document structure is updated to reflect the current changes
within the entire documentation project.
Change-Id: Icc389ddec16ddfa40ecbbb5871af44563374415c
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
Changes made to streamline using Gerrit recommended practices.
Changes included edits to grammar, punctuation, spelling,
word usage across multiple files.
Signed-off-by: steveballard123 <stephen.r.ballard@intel.com>
Change-Id: I286eb508abe10bb2ca0dd1b070fe7887fd5020e6
Rewrote and edited for clarity, punctuation, grammar, word usage.
Signed-off-by: Steve Ballard <stephen.r.ballard@intel.com>
Change-Id: I0332be9152312047a39067e7d610a563352abb1b
Only 1 port is available on Quark through the PCI bus.
Change-Id: Ie0e0173686947134d2553dd0fd0230ffa5a1d456
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since such controller is found on Quark x1000 (Galileo, ...), it will
need to get configured and/or enabled through PCI.
Change-Id: I16d00364edcb17653eaaf073e87b4e5850de7299
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using the OS provided sys-io functions for access to the registers
and lower level devices.
Change-Id: I1a88786189cbed0965f84146ffad9988a3b68a7b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adds the necessary changes to Kbuild and Makefiles to enable I2C
driver support to build.
Change-Id: I3113ccbbbbb4e06ef134ca73f509d2755a2abb59
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This will initialize the UART console port at an earlier stage than
usual in order to get early debugging outputs.
Change-Id: Ica90fe3481687ef20488b59f6d554a8af1d22559
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unset by default. When set, this options will enable early printk
through the console. Such option is only meant to be used for debugging
purposes.
Change-Id: I6690f94b0922826bd2666ef0488dcabe2f131531
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Device ID was wrong
- Setting default class id
Change-Id: I9fd1df284eca4067c21beffa7599307a40be5144
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A fix for a mistake introduced in commit 1a7357.
Change-Id: I411937c85f29abb934ae5385f4858950f5d76887
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This way, it will be possible to use Galileo and it's UART ports without
PCI_ENUMERATION set.
Change-Id: I9498aca818b128a6ee69fde21aa5c4b9cd6bc1ad
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to keep track of PCI class's bus and dev. First, there might be
more than 1 bus and/or 1 device which would hold the same class.
Secondly, with the new PCI_ENUMERATION option, enumeration PCI device is
now optional and it's advised to unset such option and statically
configure the PCI information of the devices (to gain in booting time
and code size). So finally removing all of this.
Change-Id: I395d08c8f6f5e76431af59aa6fc9b30d703f2e75
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is being referended by the same file
but is not being defined anywhere.
Change-Id: I5e0ec4c29cba773a5256bae52190a117fcc12bf3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put relevant items under the same menu and move compile options
out of general setup and make it a top level menu.
Change-Id: I8125418e19cb6ffd08825d30c07058ec0d943ba3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I151b3c6516b9b5a38ab0da2948c951eb69d57498
Signed-off-by: Adrian Pochiu <adrianx.pochiu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The _ARC_V2_IRQ_VECT_BASE register must be set to the vector table in
flash.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change-Id: Ied5451c98222f545cd669967023aef26c3d8e48e
Revises and supplements information on concepts.
Change-Id: I7dd9dd2e99cd5d975cc0f617b076dcf13c414fd0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
also add a readme saying files here are auto-generated.
Change-Id: Id33056192d8020c6cddcd12f406d15384db374ac
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only one wrong is sufficient to fail the test: the found device is not
the one we are looking up to.
Change-Id: I2a54b5683fedf7d54de1e1553aecba40b6b6b2e1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Revises microkernel object sections to make it clear that objects
are referenced by name. (e.g. MY_TASK) Also adds text to make it
clear that task groups are named entities.
Change-Id: I3480f3526293dae7a0bab2006250c97334e04dfb
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This will help when debugging, since there might be different bus and
device on the same target.
Change-Id: I886a256f14a960d2faed71561416ee3bee20af1e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Finally switched from ldw/stw to ldh/sth, as Benjamin noticed in an
earlier comment (I was using ARC ISA, and not ARC V2 ISA). So indeed
ldw/stw are obsolete and equivalent to ldh/std.
- clear, set and test were not working in case of using a memory address
which would not point to a register: bclr, bset and btst requires
registers as operands, and cannot deal with pure memory address (i.e.
something like [rx] is not valid), thus the requirement to load first
the value pointed by the address into a register, operate on that
register and storing the result of it into the pointed address.
Change-Id: Ib9c24c0a2c6d2b02e2d08d24f31cbc1981536a7d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This file is now built as part of the host tools and
should not be checked in by mistake.
Change-Id: I03af1db752f96bc2c238e29506b10d4d16c62e2e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This options does not exist anymore, no need to carry it
here.
Change-Id: I0bcafe2ff959dbc2e0fcc3f9481b65c43ea64f14
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample builds multiple kernels with different configurations
starting with a minimal kernel that basically does nothing and
adds features one by one to measure the minimal footprint for the
various supported kernel objects and features.
Change-Id: Icba984845dc6f1979d16ba246bdb133cc6e3465c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was messed up due to lack of arc platform to test.
Change-Id: I5abda172dddf54532c1bcb66f36d02db7f7d7ff4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The platform configurations micro_ti_lm3s6965_defconfig and
nano_ti_lm3s6965_defconfig are obsolete. The correct names
are micro_basic_cortex_m3_defconfig and nano_basic_cortex_m3_defconfig
respectively.
Change-Id: I0642008355a1abc70bc89db5202dab8266af4542
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The term "generic pc" is obsolete and has been supplanted by "ia32" and
"basic_xxx" as appropriate.
Change-Id: I7064eead81d526e2df89a7ccbfe1879f2e402f41
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The event portion of the app_kernel benchmark no longer outputs the following
(abbreviated) error message:
<path to project>/app_kernel/src/event_b.c:86 Error: tick occurred
This error was occurring as the benchmark test had hard-coded the value of
the event TEST_EVENT to 0 instead of defining it in the prj.mdef file.
Consequently, the system was using event 0 for the tick event; every time
task_event_send(TEST_EVENT) was invoked, the system treated it as a tick event.
Change-Id: I1a785a6594415bd4b0300d382f76a6d768641864
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
