This patch is needed to be able to test zephyr against tests
which require Zephyr to be non-connectable.
This adds handler for the opcode 0x06 - Set Connectable command.
Based on connectable flag in current settings, the corresponding
advertising type is set after issuing Start Advertising command.
If connectable, Connectable undirected advertising type is set,
if non-connectable Non connectable undirected advertising type
is set.
Change-Id: I77865b67c4b717548095ac5e398a873d1b739d6a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This feature is needed to pass some tests which require termination
of ACL link.
Change-Id: Idab03c569172ea6deb3bc5cf6744e5e73bd5de3e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
According to new tester API in case of success Current_settings
shall be returned.
Change-Id: I1caf05180bff4756b8e7271098611d23200af8ee
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The etimer.c does not need to know about ctimer_process so
remove the extra variable.
Change-Id: I761a9d79c09876c5270e294dd008a8821705e9a2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code did not mark net_buf to be freed in a case of error
when receiving data. This caused the system run out of network
buffers very fast. It is necessary to set uip_len variable to 0 so
that the upper stack can free the buffer in this case.
Change-Id: Id5e009affcb2ce916f21fcf60060efb1c6d1ec0c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allocate a net_buf when a network packet is about to be sent.
Earlier one statistically allocated buffer was used for sending
RPL packets but this did not work well enough and it cluttered
the RPL APIs with redundant net_buf parameter.
Change-Id: Ib4160167f8deac83c30852af2346acdf6c6f711b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When the timer is set, the caller needs to specify the function
that is called when timer expires.
Change-Id: Iae69986c6f32b789d708247b187d143e45d73828
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The RPL support needs bigger stack than 600 bytes.
Change-Id: If61fb2b4874d32d6e02c8e510cccd45246332da5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print RPL statistics in the general IP statistics printing
function if CONFIG_RPL_STATS is defined.
Change-Id: Iefc3a1e5186b052e91b17309a6e9fdeb2fa70886
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Need to use pointer when printing link address.
Change-Id: Ied7fcbefc02034e0ddbe714716b883de33d1e724
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For RDC (Radio Duty Cycling) we activate nullrdc driver
if 802.15.4 is not used.
Change-Id: I793b84ee8e81cdbc8315758f1b83f7ad3bd7555a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These commands are necessary to pass some of the GAP tests.
Change-Id: Ia599e7dc3dd06aa5ac4130e0d878fcddad7b37dd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Depending on selected Kconfig options some parts of public API
are disabled with #ifdefs. This should make it easy for user to
figure out which options should be enabled to specific API.
Change-Id: I4ae1bfd7bf535ea45869772c429ccd3d3d4c214e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to reduce BT buffers used if connection
support is disabled.
Sample beacon application size reduced from 15212 to 14956 bytes.
Change-Id: I431ea5087706a06eaea76d572839c3afebfb963e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Make connection related code splitable. This is in preparation for
not compiling connection related code.
Change-Id: I24e21eb553da4a3522916e5cfe17e4b51526ad4d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to not compile SMP support for devices that don't
require pairing. It is required to support SMP channel and reply
with error for any command received even if pairing is not supported.
To handle this cleanly a null smp implementation is used that case.
Change-Id: I656a52dac882839db904eee65f25a4e29ea2d8c2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to not compile data signing support if it is not
required. Reduces image size of peripheral sample app from
45772 to 44436 bytes.
Change-Id: I2cd3515973d1a70f478cbd68426ec84fd1645d19
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If remote IO capabilities is KeyboardOnly and local is KeboardDisplay
passkey should be displayed on local side.
This was affecting TC_PKE_BV_01_C Security Manager qualification test.
Change-Id: I4d21925f3f0903250b190ae83eee7f4529114579
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_gatt_subscribe requires setting proper value in the parameters ever
since indication support was introduced.
Change-Id: Ib78dac717874e51e21bc9f8ad10279ba9fe68097
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds gatt-discover-secondary which works as follow:
btshell> gatt-discover-secondary <uuid> [start_handle] [end_handle]
bt: att_find_type (0x00110d18): uuid 0x180f start_handle 0x0001 end_handle 0xffff
Discover pending
btshell> bt: bt_att_recv (0x001134a8): Received ATT code 0x01 len 5
bt: att_error_rsp (0x001134a8): request 0x06 handle 0x0001 error 0x0a
bt: att_find_type_rsp (0x001134a8): err 0x0a
Discover destroy
In addition to this gatt-discover is now renamed to gatt-discover-privary
to avoid any confusion with other discover types.
Change-Id: Iee1fdf3e72269b134e222b4a2c6b4329858e71b0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to BT_GATT_DISCOVER_SECONDARY to bt_gatt_discover using
Read by Group Type request as following:
Change-Id: I2c3907dcc18ad077c3161fda9ad94fe3b5e4fd45
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to BT_GATT_DISCOVER_INCLUDE to bt_gatt_discover using
Read by Type request as following:
< ACL Data TX: Handle 3585 flags 0x00 dlen 11
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Include (0x2802)
Change-Id: I4452e99f08d0b61cc52fe943eb40527561f3ed60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since atoi is available in libc this implementation can be removed.
Change-Id: I3cbb230916f382e27d59b503618b6291c8f0b691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
All the data shall be sent in little-endian byte order.
Change-Id: I6d4ab0760f92e202ddcb348d30f0d1f208f84f1d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If tinycrypt is compiled in use it for encryption instead of HCI LE
Encrypt command.
Change-Id: I9cf70540f14ed449bfda52c4a0901462b9a60fe9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Some tester commands require to response with current settings.
This patch is needed to properly track the changes in these settings.
Change-Id: Ib9c919e804decbe26ba6ab2a23f1c30d812f98ab
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We are seeing on some platforms that the VMA alignment
does not match the LMA alignment for this section, resulting
in problems when copying into RAM by __csSet(); any copied
sections afterwards end up misaligned in RAM.
While the true fix for this is under investigation, force
4-byte alignment for VMA and LMA.
Change-Id: I627d9e7a3446cbc09dc310a156d8b3268e61c91d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PCI legacy bridge is a device connected to PCI bus and
allowing to program the routes from interrupt pins to IRQ
numbers.
Change-Id: I129719d71f958bbf5ad8c5c9949dcea93d94b89d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In some cases an MDEF file is not needed, especially when using
private objects. Check if the MDEF file actually exists and define
before trying to use it.
Change-Id: I69c78e6d30bc0df0397e5ae354f91b774fcb737c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr does not have a MAINTAINERS files, so remove the comment
about checking the file when reporting false positives to avoid
confusion.
Change-Id: I915dba009902a68d5e621603d22b7df57d84a1b1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Created config file for checkpatch ".checkpatch.conf"
Change-Id: Ic2d72eed38b333d4b05d2d0c8953cbe2795d2429
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce a new variant for the Zephyr SDK, do not call it
Yocto SDK anymore.
Keeping the yocto variant for now to avoid breaking developer
setup.
Change-Id: I545693eb4be4cec910096ca2ba7e3f38803b4c8d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
