Move the common #define for IOAPIC interrupt trigger flags out of
platform board.h and into the driver.
Change-Id: I2d50457a45fae62ff085f7239712d580243253bb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move the common #define for IOAPIC interrupt trigger flags out of
platform board.h and into the driver.
Change-Id: Ia0a069464392714f38037841de52e8d265fa4f49
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Initialization and usage of nano semaphore require an actual semaphore
object in memory. So make sure the semaphore is there.
Change-Id: I4a7391973c65f99132735133b82f1e3837eab4f8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a build test for the dw_aio_comparator driver to catch any compilation
issue.
Change-Id: Id9c8e49656f1fd5843183fdd2cd0eb8d53fc8c8a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a build test for the i2c_quark_se_ss driver to catch any compilation
issue.
Change-Id: Id7342c07f3630252a9a06b4afde9eea8f423287d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is part of the convenience wrapper for timers as well as
nano_timer_init(), nano_timer_start(), etc...
Change-Id: I256e16682e5520eac2b590afcaf00df8b6e8ffd6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
clflush and mfence are not supported on `iamcu'
Change-Id: I25b7c582de3b8e2bbea3f219d4655c16763410f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A special situation may occur when a processor raises its task
priority to be greater than or equal to the level of the
interrupt for which the processor INTR signal is currently
being asserted. If at the time the INTA cycle is issued, the
interrupt that was to be dispensed has become masked (programmed
by software), the local APIC will deliver a spurious-interrupt
vector. Dispensing the spurious-interrupt vector does not affect
the ISR, so the handler for this vector should return without an EOI.
Change-Id: I4cf4744bd6efd68b72e2c380269de4181dc80bd9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The APIC by default uses vector 0xFF for the spurious interrupt
vector as described in the x86 CPU manual volume 3 section 10.9.
Make this its own config option defaulting to 32.
MVIC doesn't have a spurious interrupt vector, and due to the
fixed IRQ-to-vector mapping for this controller, continue
to use the last available entry.
Change-Id: I29bd09df700629dc0d15b30a6ae590b0df1ef890
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was only needed for an older implementation of software interrupts,
now superseded by the irq_offload() API (which doesn't interact with
the interrupt controller at all)
Change-Id: I8aa696d370ae1799872f6d70de69f3cb5b47456a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We now only use ARCH and avoid duplication of the same definition.
Change-Id: Ia61059b906a2ebc31e703412bead948997975d58
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will only generate the .su files when CONFIG_STACK_USAGE
is specified, otherwise the tree will be full of .su files.
Change-Id: I3ffc7a7f5ab09aaae49ff65e8ad5de0832370777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use defined(__clang__) otherwise it might fail in some cases.
Change-Id: Ifb2e1cd971325e2a7f87e530e5ee921a5fcee6b9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
define CONFIG_PLATFORM only once in arch/Kconfig and set it
for every platform.
Change-Id: I8554bb36d2d15c3ee71fa63dfc3a763ebca956ee
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
excecptions are handled the same for i386_sysV_abi and iamcu calling
conventions ATM since we do not have any exceptions that we can
recover from there is no reason to have seperate implementations.
Change-Id: Ica8b332d7756a91b56f7080ac74771ad25d32753
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Add null definitions for the interrupt latency measurement API so we
can remove compile fences in C code.
Change-Id: If86eedf79afcb49002108814dd4fb864956eb667
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
functions defined in header files needs to be 'static inline' to
avoid linker issues if they are used more than once.
Change-Id: I2feb3560bde7cbc9a5c7932eca585be8036f3b25
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Other internal functions are shown in this header, no reason to
keep this a secret.
Change-Id: Icb7d36206148c281f1960d1ac10368d9bb3033f1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now that i2c is fully synchronous on top of an interrupt based
implementation, polling mode can be removed. Applying the API change
into the existing drivers.
Change-Id: I05d2a6089743b6b69f7c9da6312057134578e2f7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
According to the datasheet, there is some caching going on as a
performance optimization and the IDT needs to be re-loaded if any
changes are made at runtime.
Change-Id: I23864e1109907512066a9f8f3a36e3f719b9174b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The i2c_set_callback() does not check for NULL pointers
in driver's API struct. So create an empty set_callback()
function to avoid runtime exceptions, if it is called.
Change-Id: Iad8fed62228d10d42b8189e76873eb4c2ad12eb3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Those empty C files are there because the current Kbuild
requires Makefile to be present at those directories,
(due to arch/x86/Kbuild), which requires building some object
files. So the empty source files are there to produce empty
object files to satisfy this.
Change-Id: I14056347ea14cff227d9e8960192e8673c0019b8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Change-Id: I1d379068f64855d5d4595838040ec50f97f638a0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Change-Id: I1af8b2888779b2b58367feaff9ee1a6d97b4873c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for forward/backward ANSI sequences and the ability to
enter new text while the cursor is somewhere in the middle of the line
rather than at the end of it. printk is introduced into the game
rather than the old write_uart() since we need to make use of the
%u format string support for creating the ANSI sequence to move
backward/forward the right number of characters.
Change-Id: I41f880fc5de773573147c5a291e2cbe94d5370a4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
By default, since we don't have special support for control characters
we should simply ignore them. This includes both pure (single) control
characters as well as ANSI escape sequences. The most important
control character to support for basic editing is Backspace.
The terminal creates a Delete (DEL) character by default when
Backspace is pressed. It also treats the Backspace character ('\b') as
a non-destructive backspace. To create the effect of destructive
backspace we have to send the sequence "\b \b".
Change-Id: Idc942d09be2a84b8dd0a60ace8429102c6c7e355
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a simple implementation of isprint() which is used to test for a
printable character.
Change-Id: I0ebca10ec0f8e43ee245f6508c5b82c6e207bd32
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To clean up the logic and prepare for more control character support,
change the behavior so that instead of treating end of buffer as a
forced line break simply stop incrementing the position variable until
getting a carriage return.
Change-Id: Ie3970cb779dac3c826a3d21cf0b9ae57a43eddb2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The terminal doesn't generate line feed ('\n') when pressing return,
rather only a carriage return, so we can simplify the condition for
handling end of line.
Change-Id: I3eef8c6af19c43ef98ccdd9a5e3662d280834425
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Completely overhauls Kernel Primer section on mailboxes to fill in
a host of omissions, correct errors, and improve readability.
Change-Id: I7f27230f59a593f6b7f44f399363ba423156b43e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that the HCI driver is called H:4 use the shorter driver-specific
prefix h4_* for its internal symbols.
Change-Id: Icdab1147e5ec31f84e0a3d810192ddd462f4dfdd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll in the future also have a three-wire UART (H:5) HCI driver, so
the current H:4 driver cannot have a generic name.
Change-Id: Id326ae63d6f4d273d0d0c6120143e2f8d62968d1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
