This API is not being used for anything, the interrupts for UART
drivers are all being configured statically. Saves code space as
gc-sections can't tell that these APIs are unused.
Some instances where IRQ/priority information was being saved in
data structures and never used fixed.
Change-Id: If56b4fdc251b80be9094ffcbac6f61e265ac2ffd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are not doing any dynamic interrupts or exceptions, we
can put the IDT in ROM and save a considerable amount of RAM,
up to 2K if the IDT is the default size of 256 entries.
The _interrupt_vectors_allocated table can also be put in ROM
if we're not using any dynamic interrupts.
We introduce a new Kconfig option to force the IDT to be in RAM
for situations where no dynamic IRQs are used, but ROM footprint
needs to be conserved.
Change-Id: I38c9f1a8837b4db9f3dea1caa008374a26cbbf1d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use makefile targets to build and link final binary. This removes
dependency on a shell script which is not portable and imporves
dependency tracking when building.
Change-Id: Ib75f162cdb1dde35ccaf980658bfe70daaf581b6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Many variables being declared in the Makefiles are Linux specific
and never used by Zephyr.
This is an attempt to cleanup the Makefiles and just keep the code
we use.
Change-Id: Ib97d3d7e3a55077d6f9ec2b4170b3763424a1c99
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding emptiness into core-y does not add any value.
Change-Id: I695f9a8682eb35bcdb80eff9716338f88d84ab09
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Modules are not a feature of the Zephyr kernel.
- genksyms removed, not used by zephyr
- bin2c remove, not used in zephyr
Change-Id: Ic8f0e786530dcf410b07d6c5cc47f1087000d528
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This variables are not being used in the code any more.
Change-Id: I3d4b513ed61d98020f27e5968835090946fe0c8b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enables building with the iamcu variant of the x86 compiler
and enabled using the IAMCU ABIs.
Change-Id: Idf71251898e250b8df73c065462c93c289879fe2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
() Rolls the transfer initialization function into the setup function,
as it is logical to have just one function (not to mention there
was duplicate code).
() The setup function returns early if there is any error.
Change-Id: Ie9d3057f2963a0ba5b74ac66e058ff4fee31f099
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes a build issue when CONFIG_I2C_DEBUG is turned on.
Change-Id: I8df72e41d0809f99c9c3855cbfcbc5abc60cbca1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are a few bits missing on enabling I2C controller on
quark_d2000_crb. This adds the missing bits.
Change-Id: I05bbe8367a9e69962db573d496f1f9f0167ba597
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch introduces the infrastructure required to enable QMSI drivers.
QMSI drivers are shim drivers based on drivers provided by QMSI BSP. The
BSP provides a static library (libqmsi) which implements several drivers
for peripherals from Intel MCUs.
Next patch will introduce the first QMSI driver (watchdog driver) which
will rely on the infrastructure introduced by this patch.
Change-Id: Ic7da5d0249af0629eef8c91d124a153f84d4a76e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The new SYS_GET_DEVICE_NAME macro can be used in combination with
SYS_GET_DEVICE to obtain an external reference to a static device
object, e.g.:
extern struct device SYS_GET_DEVICE_NAME(my_device_name);
struct device* dev = SYS_GET_DEVICE(my_device_name);
dev is here set at compile time.
Change-Id: I9094925c685177f01e0cef194ec382ad49658f9d
Signed-off-by: Fabien Chereau <fabien.chereau@intel.com>
These symbols have the same name as the symbols from lib QMSI, which
causes a compilation failure, when lib QMSI is used.
This replaces the offending symbols with names which are more consistent
with the rest of the file (rtc_ prefix).
Change-Id: I288a1a229bf0b40f3b6fc8ffb35c502f998054b8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This patch moves the CONFIG_STACK_CANARIES check from architecture's
Makefile to the root Makefile since this option is kernel-related,
not architecture-related. This way we avoid replicating the same
CONFIG_STACK_CANARIES check in several Makefiles.
This patch also removes some blank lines from the Makefiles it touches.
Change-Id: I458f92fa6799526c608369d1e56579936bcb196e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Changed the README.rst to reflect the updates done on the API
documentation.
Change-Id: I591ddb7e618afedf9fd77eb322255aa1ee94c5a0
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
It's basically the same pinmuxer as in CTB with different external
sensors wired to it.
Change-Id: Icea89a72b805d6dd2c5798c3f517c4fb00c819c9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The macros _NANO_TIMEOUT_TICK_GET() and _NANO_TIMEOUT_ADD() will be
used in later commits to help simplify the nanokernel APIs.
Change-Id: I668af85d775eab112953d064d9c91de607f60a59
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Build kconfig with -DKBUILD_NO_NLS by default and disable compiler
warning on Mac OS when building the host tools.
Change-Id: I76a2b5ab6b6b1c0bbe2dc2b31e3bd651fd05948e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated board to arduino_101 and updated nanokernel_objects.c
NANO_CPU_INT_REGISTER macro args.
Change-Id: I5281a84138ef031ae82cdd80ab617f94b3f712af
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
If the remote handler tries to send a message back with wait enabled
it can lead to a deadlock.
Change-Id: Ife6eae29c10e8937abd1b6511ee605f7786c6a7a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The while loop on the status bit was unnecessary as we will get
a separate invocation of the ISR for every message. We also ensure
that the global status register bits for the channel being serviced
are cleared before exiting. Fixes an issue where some messages
would be dropped or repeated.
Some runtime checks that shouldn't happen in practice have been moved
to assertions.
Change-Id: Iedd28ae15522c7b9f59ef34fa9fa8b4e24e6be14
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's unclear why the carriage returns were moved to the begnning and
not the end.
Change-Id: Ic6bda55c7537538c47477e6c44f5e4c1534573d4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This implements the newly introduced APIs to manipulate line controls
for UART.
This also implements the driver command API as setting baud rate
may require setting the DLF.
Change-Id: I80634aa3fbd4a3223c46edb61417123e36f439dd
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds 2 new APIs to the serial/uart drivers:
() One is to control the serial line, such as RTS and CTS.
() Another one is to allow driver to expose hardware specific functions
to apps. This is needed as some hardware may have extra registers to
set for baud rate.
To keep the code size small, these features are disabled by default.
Change-Id: I15c000ce68a0a490dcfd3493b2fe9bc51fa974fa
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
