Current quark_se target is not specified in
scripts/sanity_chk/arches/x86.ini list and apparently this is the
reason tests were not executed, change it to arduino_101.
Change-Id: Ifedcf08cc9b25839d389bd7eb92ed42012e9075a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The current format used is a swap of RFC 4122 thus the 16 bit values do
come at the end not at the beggining and data need to be swapped.
Change-Id: I38a27cdf82a28d28e47675f719772278d85deaaa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adjusts encryption state name in connection complete event.
Change-Id: Ib7e6b2c5738ca9f5832e0e277d8f5718050f4bef
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
In legacy passkey entry method confirm value is sent first.
Change-Id: Ic379650dab64715be6d281fa8d3389f5ff34a978
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use uint8_t for pointer arithmetic when clearing SMP context so that
correct memory is cleared.
Change-Id: I8b88bc4c2eb181397bce5fb80a6ab250086cb17d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There are situations when nble_read() might stuck reading from UART when
there is no data. Limit number of tries to 10.
Change-Id: I23380b622439ce9fa72b05f4eb527f03c749fce8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement using printf(), to make correct stack use define check.
Change-Id: I81894ccb511f921a5fcff37d85790191251d683f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the headers defining RPC with Nordic chip changes frequently
define weak functions printing BT_WARN("Not implemented") if
function is not defined.
Weak function symbol is marked with "W" as viewed by nm.
Change-Id: Ia39b64c6e89fdddc65683711fd192a235fe754d4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This lowers the chance of running out of buffers when sending or
receiving a lot of data.
Change-Id: Ifedc5652f993fa54f7aded87aef545ffb49e7581
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The RPC code is not net_buf aware so it will not update the net_buf
length when encoding data into it. We have to therefore do it
ourselves.
Change-Id: I7d7d3c09007a2a9bce822625607dbf7470a7ea0b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make code readable removing extra spaces.
Change-Id: I61e3486e1d301ff7d36fd2e34243ff6e9111e54d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove extra spaces and make code readable
Change-Id: I3e57a5440476eb0143d19ce9865d3a76c58b90d1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Include all functions using previously defined stubs.
Change-Id: If9ab3f02d2e3e1f27c09b0d666fcf531cf76898d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move receiving logic to fiber rx_fiber(). rx_queue is registered with
uart driver and all data is sent there for processing. Clean up old
ipc_channel interface since there will be only one interface to uart
driver.
Change-Id: I292863b1f38e5adb8ca4e6ac63aed09c83de56bf
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactored Johan Hedberg's code adding callback to be called when NBLE
is up.
Change-Id: I2a8a2238942c0adae2a5c47cfe94d8f2b1112810
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactored Johan Hedberg's code adding writing to NBLE_BTWAKE_PIN one
to drive it high, needed to wake up NBLE chip.
Change-Id: I63b9583281db897f2326e4570716c25ce181128f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Port RPC deserialization to Zephyr upstream.
Change-Id: Icc9e055565185e907f51832443386f929a752586
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Port RPC Serialization to Zephyr upstream
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change-Id: I315d52dc6576254a6928520d1353856d41a25c69
Resets Nordic BLE chip and opens communication channel to UART.
Change-Id: Ie516869a4d978fc1622361ebc42894430fdf9ea6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move BLE configuration to board and enable GPIO for NBLE.
Change-Id: I99c309656430936edf6766fc99fe83b011801bb4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds basic support for communication with Nordic BLE (NBLE) chip
connected to UART.
Change-Id: I3651e291ec18805a63ecd3d240dce62273e3c498
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Set options and baud rate to communicate with NBLE chip.
Change-Id: I338aad3b1dc03b809aade29eedac7093ea346a5e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The ICMPv6 RA payload was ignored and not sent. This was seen
as malformed packet by receiver. We must update the length of
the message by calling net_buf_add().
Change-Id: I3dc64cfce669de54283db290cfb009b2c6ea7225
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ICMPv6 NS payload was ignored and not sent. This was seen
as malformed packet by receiver. We must update the length of
the message by calling net_buf_add().
Change-Id: I5bf53695c811c27a75320fea7331d91782a9748a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ICMPv6 RS payload was ignored and not sent. This was seen
as malformed packet by receiver. We must update the length of
the message by calling net_buf_add().
Change-Id: Iddedb7b6674f30c7943c0ba59c0afc7d244a1e0d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Delivers a valid Link Key to controller if found or responds negative
to Link Key request to controller.
Change-Id: I98061110a60b066421f35db44455925cbcd3076e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Get access to available link encryption related handlers.
Change-Id: Ifcf4cf3af11368ca68cd93d3023a020bb01a7b74
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This patch adds two missing includes necessary for building IPv4
support.
Change-Id: I381d0951df4ee615867743dbde551666b603fecc
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Fix a build issue, as DEVICE_INIT() is the only macro used now and
others have been removed.
Change-Id: I69f7df168f5c4284104068b79ba9097d9a1904c1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mostly SoC initialization and some kernel subsystems, but also some
device drivers like the interrupt controllers.
Change-Id: I8dc1844c33acd877c075b6b03558fdca6f87500b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is to be used by subsystem that don't really want to create a
device but rather only want to be initialized automatically during the
kernel init sequence. It is just a wrapper around DEVICE_INIT(), and
thus still uses a device object, but it hides that fact and can be
replaced in the future without changing its model.
It can be used when a device created does not have objects associated
with it, but only an init function, and also when the device name
(DEVICE_INIT(<dev_name>, ...) does not matter.
Change-Id: I5488f430a6fb757cdcb499ef352775dc67aa0565
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename them from __initconfig_XXX to __device_XXX, which is more
indicative of what they are.
Change-Id: Ia63ae40c16a2b6f0413c37863cddc39f04839b72
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
They have been replaced by DEVICE_INIT().
Change-Id: I06551f37593a3debb7eb221badd267bb5c7040c0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
