When using the CSMA MAC driver, all send() calls but the last one
return without uip_last_tx_status(mbuf) being updated. If a mbuf
has uip_last_tx_status(mbuf) != MAC_TX_OK and is freed, the next time
it is allocated the first send() call will appear to fail and the packet
will be dropped.
Change-Id: I0fb388714f8071947fa0641fbe03e063550328db
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
This adds support for building and testing peripheral_esp using NBLE
driver.
Change-Id: I962238d526101f8f423491d3023079684ec7d59f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Take into account btauth callbacks for finding out IO capabilities.
Change-Id: Ifc35a1919c7e4d1b5ebaace7f13744f9b977d7e8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add skeleton to handle events generated when trying to set security.
Change-Id: If9635690d50dce22a35dd0d05d8cc5046edaafee
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_conn_security() for NBLE. We call
nble_gap_sm_security_req() which shall do all needed job.
Change-Id: I5fdccc2ea3e88266db8f940dc453547d5ea51f59
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor code to be aligned with upstream Nordic BLE RPC. There UUID
is used only for primary service and characteristics.
Change-Id: I8fa840570c2535a73aaa68793a45013faacc59da
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Makefile.ipstack is more generic to net applications which
communicate through slip or between two qemus. So net apps
common folder is right place for it.
Change-Id: I57ca1eeaff28b853609daf92772361406131aa7e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add prj_qemu.conf files for dtls_server and dtls_client. Now
it can be tested between two qemus running 802.15.4 dummy driver.
Change-Id: Id94492f90539025854063662c2f0750a0b9ca845
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Correct error message sent to application using GATT API.
Change-Id: Ibf7f9f8943f7e11fd2cf6eaff7c2fabbcdcadba9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_gatt_indicate() and response to it
on_nble_gatts_send_ind_rsp().
Change-Id: Ibf427135c6385cb84f9fab4edeb3a21760a8702e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For printing two octets handle use 0x%04x print format specifier.
Change-Id: Ia654d9f2a639cfb9d63647497b302205efab0869
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update RPC to make it compatible with firmware 0309. Among other
changes mostly related to cleanup there is extra flag octet in
struct nble_discover_params.
Change-Id: Ib4dbe15a6919c251f14888090e2f1d91c150c5f2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_gatt_subscribe() function and handle subscriptions.
Change-Id: Ib6ea63a237413ffc65d8572b14d7912d4c7d2699
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If the client is waiting for a response but the link is disconnected it
should be notified as the request may never be complete otherwise.
Change-Id: I1fb83b63d8effb4ef2a8f838566c1e68deae9f2c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure the CONFIG_GPIO_K64F_* kconfig options have correct
dependencies. Or else CONFIG_GPIO_K64F can be disabled, but all
the CONFIG_GPIO_K64F_{A,B,C,D,E} are enabled.
Same goes for SPI, FTM and pinmux.
Change-Id: I8d225dea714081b14b19006d61b8f3f6afafa5ee
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The DesignWare GPIO options should really depend on whether
GPIO_DW is enabled.
Change-Id: I98b2964d6a0afdac89dc66a78342076afa6feec5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a menu to enclose all the shared IRQ kconfig options.
Change-Id: I8083204c53f60022c06e9c683fa9544fdc278f32
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a menu to enclose all board Kconfig. So the board
configs do not appear on the top level out of context in
menuconfig. This also reflects the SoC options where these are
under menus for each architecture.
Change-Id: I76ce2bf1acf7cbd2673ceb2eac71e96cdca2ff35
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The SoC selections for each architecture are moved to the top level
in menuconfig and xconfig. This makes it more intuitive to select
architecture -> SoC -> then board, avoiding an additional trip to
go into the architecture menu to select SoC.
Change-Id: I57a78a09adfc4bb12423915b6ad14ceb74381a2b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It makes no sense to allow enabling support for floating point
registers when the CPU has no FPU.
Change-Id: If51187033fc84957721d87fa6e79ef31124f4b14
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These options should be selected by individual SoC automatically,
and should not be visible options. Or else it would be possible to
select Quark SoCs and telling Kconfig it is from Atom family (which
is incorrect).
Change-Id: I17a6cf713378333e0e7942aa49b381b5eb9526b5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This makes the board selection dependent on SoC selection. For example,
select Atmel SAM3 will only allow "Arduino Due" as board selection.
This disallows incompatible SoC/board combination, like K64F with
Arduino Due.
JIRA: ZEP-106
Change-Id: I675961cf33db5a0058fc68f14c8f16978f9c6b95
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This illustrates the usage of the sensor API, using either triggers or
periodic reads from the driver.
Origin: Original
Change-Id: Ief7451fc4771b9459a2b3b7ed0a33341a7710cc3
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Support for data-ready and near/far triggers is included. Datasheet the
sensor available at <http://www.semtech.com/images/datasheet/sx9500_ag.pdf>.
Origin: Original
Change-Id: Idd491a8bad7e119b0ed66e655955228ffdac6e76
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The MCP9808 supports threshold triggering. Add support for this feature
in the driver and the sample application.
If triggering is activated, the driver can create its own fiber or use
the system-wide sensor fiber.
Origin: Original
Change-Id: Ie825a22245cb48cbdffba3049011e4d305975d53
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The app simply reads the temperature from the connected MCP9808 sensor.
It forces -O0 compile flags, as the default (-Os) triggers a compiler
bug when converting temperature readings.
Origin: Original
Change-Id: I0654543e3d361a862bdf78b44fdc1430cb6aad51
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The driver only supports simple temperature readings. It does not
support the alarm feature. Datasheet available at
<http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf>.
Origin: Original
Change-Id: I283e6697fc6947975323d280f5ff0ba625fac5a9
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Sensor drivers expose one or more channels, corresponding to each
individual quantity they can measure. Such quantities may be different
altogether (e.g. temperature and pressure) or different axes for the
same unit (e.g. three axes of acceleration). Before reading channels, a
driver must be explicitly instructed to obtain a sample from the device.
This helps accommodate sensors which can only read all channels at once,
and also helps ensure coherence of measurements and optimize I2C/SPI
traffic.
Channels can be read as floating point values or struct sensor_value.
The latter consists of a pair of integers and a type field which
dictates how to interpret said integers. The most common type is INT
(where the second value is ignored) or INT_PLUS_MICRO, which means the
second value should be multiplied by 1.0e-6 and added to the first.
A sensor driver may support one or more triggers, corresponding to
interrupts or timers. Registering for a trigger involves supplying the
driver with a callback which is called when a condition is reached.
Examples of trigger types are: data ready, timer expiration, any-motion,
near/far.
Finally, sensors support attributes such as sample frequency,
measurement accuracy or threshold values for triggers. However, runtime
configuration is discouraged, in the interest of keeping code simple.
Origin: Original
Change-Id: Id290fe544b6f7eccc4b109f3912fca1692e55623
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
This board is now part of qemu_x86 and shares the same file except
the configuration which makes it build with IAMCU.
JIRA: ZEP-103
Change-Id: I9a9911d013b493240c089ce71e9f95687dcc02a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building with IAMCU, make sure we set the soft-float, otherwise
build would fail with unsupported instruction errors.
JIRA: ZEP-103
Change-Id: I7a5f107a2df50799a7f6dd4aba36c1a977c1461d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We will now look for the defconfig to be used using wildcards which will
allow us to host similar boards in the same directory and share all existing
files.
JIRA: ZEP-103
Change-Id: Icfe5dc2fa4b2c4e21e6b1285d80e0c844d430d7d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is from old kconfig structure and right now it shows
the wrong architecture in the menu. We have the architecture in
CONFIG_ARCH now.
Change-Id: Ifee12ab5a38e9fddb44c74aa3058970f9bd0165f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
KERNEL_EVENT_LOGGER selects EVENT_LOGGER which is then used to
enabling building. Skip EVENT_LOGGER and use KERNEL_EVENT_LOGGER
directly.
Change-Id: Ib9cf3a58b12bf4e78f264d8e8ac48a8104120c3b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add missing option for adding time stamp to boot banner.
Change-Id: Idda61feeef4a89c1aa8bb7e81b52272babeb1efe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Making pinmux depend on GPIO breaks many tests and configurations
when running on real hardware. This should be added as local
configuration in the defconfig instead.
Change-Id: Ibbf1c9a3428ed692937383bf85218b0c120cbe44
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
