Before moving pinmux related code to 'drivers/pinmux' fix their return
codes to be consistent with the rest of the API.
Change-Id: Ie84f64e93745d44bef8b9d2119f6a05cdc8cb8c4
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Fix for imperative API descriptions, note needs work (see comment).
Change-Id: I300ff03ee5c6b6cb50cf2b1614f22940a0b10213
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add enum value for full-scale attribute, so we can implement runtime
alteration if needed.
Change-Id: Ib71b4cac6e8841e3f082c07ee75939d1c51209b4
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Add generic sample that continuosly read magnetometer data from
the first device that finds available within a predefined list.
Change-Id: Ia9b5fd434f462fb4704896852415f90eb633e1eb
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Minor edits to clarify wording, readability of rendered documentation
Change-Id: I4144cfb8e191234d5fb3b6aa0fc3324b85cd286a
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
To enhance readability, add bold, lists in sentence form (as per
the style guide) and other parallel content from microkernels section.
Change-Id: Ida989ec7187bf7a035803644b5cc710571b66e3e
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add driver for the HDC1008 temperature and relative humidity
sensor.
Datasheet:
http://www.ti.com/lit/ds/symlink/hdc1008.pdf
Origin: Original
Change-Id: I63cb4cdd94120b80d0d6f3205da073f0817c4f17
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add :dfn: and other .rst kinds of syntax and parallel format to
other documents in the microkernel sections. Corrected a few
typos.
Change-Id: I8e0d36a2f9091f551674fdf0518bb66453ada49b
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add device driver for the BMA280 I2C-based triaxial accelerometer
sensor, which supports reading data from the accel-x, accel-y, accel-z
and temperature channels. The driver also has support for data-ready
and any-motion triggers.
Datasheet:
http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf
Origin: Original
Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
This patch fixes the QMSI UART shim driver so we are able to use it in
Quark D2000 based platforms. Differently from Quark SE, the peripheral
clock gate bit (CLK_PERIPH_CLK) is not enabled by default in Quark
D2000. We have to explicitly set this bit in order to properly initialize
the device.
Since this drivers is now properly working on Quark D2000, this patch
also sets the QMSI driver default options in arch/x86/soc/quark_d2000/
Kconfig.
Change-Id: I817b7703554be162ac628dcd8d3d07512b9eb3f5
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch fixes the gpio, i2c and watchdog shim drivers so they set the
CLK_PERIPH_CLK bit during driver initialization. Differently from Quark
SE, the peripheral clock gate bit (CLK_PERIPH_CLK) is not enabled by
default in Quark D2000. We have to explicitly set this bit in order to
properly initialize the device.
This issue has been masked so far because the CLK_PERIPH_CLK bit is set
when UART NS16550 driver is enabled. The UART NS16550 driver is enabled
by default for Quark D2000 so gpio, i2c and watchdog sample apps were
working just fine. But if we disable the NS16550 driver, these samples
applications stop working.
The remaining shim drivers already set the CLK_PERIPH_CLK bit during
initialization so there is no need to fix them.
Change-Id: I3f658da564f87e9d52092ce7aac423c7b3e0c890
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Corrected an "is is" and other minor punctuation + grammatical edits.
Change-Id: I26f51809215a8ac77a20bc9d424e6a806e29ee50
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
For zsh users, to successfully source this environment set up script,
the version of zsh need to be 5.0.6 or above. Users can download the
newest zsh at http://zsh.sourceforge.net/Arc/source.html, and then
install it manually.
Change-Id: I1877b4030cf8688bce6b2483c302f957f4a5506f
Signed-off-by: d0u9 <d0u9.su@outlook.com>
An example of button driver.
Change-Id: I8af860058166d7ca5653f50ff585bc9784008f78
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a driver for Independent Watchdog (IWDG) commonly found in STM32
MCUs. The driver has been tested on STM32F1 family MCU.
Change-Id: Idc6ac35990e46901a206b4af0ce3767eb4875de9
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add necessary integration for supporting interrupts on GPIO input pins
for STM32F1 line of MCUs.
Change-Id: I0526a85cc3fdb96891c93ba4840ef27d613ab31b
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add mapping of Alternate Function I/O (AFIO) registers for STM32F1 MCU.
Change-Id: Id3e12290d6869c1f0506549f21407b3cd80d0a64
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add support for interrupts for input GPIO pins on STM32 MCUs. The SoC
support code is expected to provide an implementation of
stm32_gpio_enable_int() call.
Change-Id: I61bae54b8e044be4d7d8eb60c0c67b71f8c59553
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Introcuce a driver for External Interrupt/Event Controller (EXTI) found
on STM32 MCUs.
Change-Id: Ib206521fcc51b5dfaaf5dea9d436f8304f3a36be
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
The patch extends STM32 serial port driver with support for IRQ API of
the common UART port driver API.
Change-Id: If105e8528ea4ed4181cc4af0c97c24aa874e69e0
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a list of symbolic constants for IRQ lines available on
STM32F1 line of MCUs.
Change-Id: Iebf1847719c0db31cf852529fe5876e3cabbfe52
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add configuration for Nucleo-64 F103RB board. By default, the UART
console is forwarded to USART2, available on STLink V2-1 USB
connector. All GPIO ports available on the connecot headers are
enabled.
Change-Id: I266170d1288ef27f668410c5737c46cdf716e137
Origin: Original
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Add a sample program for blinking with GPIO connected LEDs. The sample
program by assumes the use of Nucleo-64 F103RB development board as the
target and will need to be updated for other platforms. The intention is
that the code will serve as an example of how to use GPIOs in one's
code.
Change-Id: Ia190a7ad5b07181731c9f502d87bd0ef0ba1abde
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Introduce configuration for STM32 MINI A15 embedded development
board. The board has a STM32F103VET6 MCU on board. The MCU has 64KB of
SRAM and 512KB of flash.
The board has the following peripherals:
- RS232 port on DB9 connector, connecting to USART1, pin mapping:
- PA9-US1-TX
- PA10-US1-RX
- a LED diode (U2) connected to pin PB5
- micro SD card connector with pin mapping:
- PC8-SDIO-D0
- PC9-SDIO-D1
- PC10-SDIO-D2
- PC11-SDIO-D3
- PC12-SDIO-CK
- PD2-SDIO-CMD
- on board SPI flash AT45DB161D-SU, pin mapping;
- PA4-SPI1-NSS
- PA5-SPI1-SCK
- PA6-SPI1-MISO
- PA7-SPI1-MOSI
- button (K1), connecting PB15 to GND
- 40-pin header connector XS5
Change-Id: Ia378b105abb25fb589a100185ea96512a5f98cf3
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add driver for U(S)ART ports on STM32 MCUs. The driver implements basic
RX/TX functionality. Data transmission is implemented using polling. The
driver configures the port to use 8bit data transmission, 1 stop bit, no
parity control.
The driver exposes a public uart driver API and registers a single UART
device 'UART_0'. The device binds to USART1 peripheral and performs
required pinmux and clock control configuration. The device can be
initialized at the PRIMARY level, with default device priority.
The driver has been verified to work with a sample Hello World
application on a STM32F103 series MCU.
Change-Id: Iae103fcd8d2fb0a6c173cf141a68e17791255aab
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add necessary integration code enabling use of common STM32 pinmux
driver.
The alternate function listing currently consists of USART1 pins
only. The listing should be updated when support for more devices is
added.
Change-Id: Ic65aeea9df9aaea7636ecdd6996f56e6ef59dc2f
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add functions required for integration with common STM32 GPIO driver.
Change-Id: Ic6637e991f5c0cf659f3b927ed47ef482b13b64f
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
The driver implements a GPIO device interface for STM32 MCUs. Each SoC
must provide implementation of the follwoing calls:
stm32_gpio_flags_to_conf(), stm32_gpio_configure(),
stm32_gpio_set(). Consult gpio_stm32.h header for details on semantics
of these calls.
The driver registers 5 devices, each corresponding to a single GPIO
port. The users can then access individual pins by using values
0-15.
Change-Id: Id236b5b75c9dd091018a50a7be3501c8591cd551
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a common driver for pin control subsystem in STM32 MCU series. The
driver allows for selection of pin's function without the ability of pin
remapping.
The driver implements a pinmux driver API, with custom `func` and `pin`
encoding in API calls. The caller is expected to use STM32PIN() helper
macro for encoding port/pin numbers or using one of the provided
STM32_PIN_* defines.
The common driver requires SoC specific support to be implemented. The
SoC code must implement these calls: stm32_get_pin_config(),
stm32_get_port_clock(), stm32_pin_configure(). Consult pinmux_stm32.h
header for detailn on semantics of these calls.
The driver also requires board level integration. The call
stm32_board_get_pinconf() is expected to privide pin function
assignments for the target board.
Whenever an IO pin is being enabled, the driver will automatically
enable the clock for corresponding port. The driver does not implement
disabling of port's clock as this has potentially disruptive, as such
such operation should be done explicitly in the code.
The pin control module needs to be initialized before any other modules,
but after clock_control. For this reason, the driver is initialized by
default at PRIMARY level, with priority set to 2. The priority can be
changed through configuration.
Change-Id: I8cb746d0f3cad72cd50b3355fe6d93a9f469be25
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Current design of Nordic RPC requires strict firmware compatibility,
add check indicating if firmware is incompatible. At the moment we
allow to continue since something may work :).
Change-Id: Ie67d4a6509e53553ae6c41a2c8d2593ab20bdcfb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allow to use Non Resolvable Private Address (NRPA) in advertisement,
following NBLE change.
Change-Id: I9491cfcd2e981237c99e55773a8beaddaee8b730
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update firmware version to 0317. Changes are mostly related to
advertising.
Change-Id: I3a438ad38e3c892e354f7ea59b99739153957f19
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
With this patch BTP error will be returned if attribute with
requested ID don't exist in GATT attribute database.
Change-Id: Ic6125c6359e75a80fb9a51b6a527ee0a98628e6d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Debug print was missing a parameter so it printed some garbage
value. Changed the printf not to try to print extra value.
Change-Id: I265c0bc8d703c8b40af6e25f5879a3d3a6fddcdf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This moves the kconfig options for each drivers into their own
submenus. This makes menuconfig easier to navigate.
Change-Id: I2bdc8c3b61e424248ffb65385a7eabc797d89684
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Moves the kconfig options for STM32F10X clock control driver
into its own submenu.
Change-Id: I9ef658defe85feab3dfdb3e329710cb48bbffd86
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Moves the Quark SE clock control into its submenu.
() Fixes the dependencies in the SoC default Kconfig
so the options are not displayed out of place in
menuconfig.
Change-Id: Ifdf06242be8ceed03c2c657c942875a5a7f2750e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Put the kconfig options for individual drivers into
their own submenus. This makes it easier to navigate.
Change-Id: I96b230c3236722c809337472f7efdc2dc1bafdee
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Replaces old DBG calls by new SYS_LOG_... ones, likewise updates the
grove/Kconfig file to include new per-level logging control.
Change-Id: I638ffa915a760b4f188c1bfa2dc68e63cbf7e624
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The header sys_log.h concentrates logging macro definitions so it can be
reused by all code, change aims create an API to replace replace
currently duplicated logging macro definitions. Later enhancements to
log can now be performed in a single file. Features:
* Optional printing of colored messages
* Incremental log levels per-module
* Optional printing of logging level label (info, error, warning, debug)
* Caller function name printing
* One point log disable
* Global override log level
* Print function detection (printf or printk)
JIRA item ZEP-111 refers to this change.
Origin: Original
Change-Id: I34492b0148b4e9d0094f69c511b96f4fd640ef44
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
() Moves config options for each controllers into their own
Kconfig files. This keeps upper level Kconfig from getting
too big.
() Options for each controller are moved under their own
submenus.
Origin: refactored from existing file
Change-Id: I77e92f72f8de85abaedfbe078283607b7c242c81
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Moves config options for each controllers into their own
Kconfig files. This keeps upper level Kconfig from getting
too big.
() Options for each controller are moved under their own
submenus.
Origin: refactored from existing file
Change-Id: I813694f26126b43523b08ebdb0a5383edd241cda
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Moves config options for each controllers into their own
Kconfig files. This keeps upper level Kconfig from getting
too big.
() Options for each controller are moved under their own
submenus.
() Adds the missing copyright to Kconfig.atmel_sam3.
Origin: refactored from existing file
Change-Id: I2dacd3d9b2bfa052c9e0c078ddffed40dbc2ddbf
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
