tinycrypt was built using the lib- scripts without any real benefit. We
also had a wrong placement of the Kconfig files under misc/ and a Kconfig
file for Crypto that was never used before.
Change-Id: I82d5902d92e7c06e10a95f418d9ead3cbcabcce4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building an application for a different BOARD, the .link file
was never updated causing issues with linking.
Also, make sure we restart the build process when the board has changed.
This guarantees that the file is recreated when the dependencies have
changed.
Jira: ZEP-239
Change-Id: Ided3a71c03fd8b2c6ab9c2bf8370104cd5071c08
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Simplify l2cap_chan_get() in l2cap.c file by removing
CONFIG_BLUETOOTH_BREDR preproprocessor check. Now function serves
only getting channel on LE transport.
Change-Id: I20b72f352ad9d5998cc812b28cb3d6951f91f212
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds support getting L2CAP information about remote features. To get
the response local stack gets call information request about 'extended
features supported mask' after ACL link is established. Then in
response if 'fixed channels' bits are enabled, next information
request is sent to get details about 'fixed channels'.
Change-Id: I4980c61b12e83fef914e97dea296b0a848d59034
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Add two helper functions to simplify the use case.
Add comments to clarify the use of the networking API.
Change-Id: I60c58296b77d724b7094b90e153b50dfc0b58135
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Support long write maximum 100 bytes.
Change-Id: I071fdf68e29a3d4493c1c60215853cfd8f2ae3c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is actually a revert from a previous revert. This updates RPC
following the very recent firmware development.
This reverts commit a146f9ef28.
Change-Id: I67b517c3959b5b78a5ef80fbb338d6cc66e43e8e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The function gets 32bit-wide data from net buffer and converts the
value from little endian to host order.
Change-Id: I2d2454951b3ac39686a25454678ce92d8a1a0f3d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
In fault_s.S, changing the word "save" to "safe".
Change-Id: Ia997082a62bf287f09a72b7f0a00d506bd982770
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Some ARC CPUs can be built with separate instruction bus
and data bus (i.e. Harvard Architecture). Such systems
have only ICCM and DCCM memories. When CONFIG_HARVARD
is defined, the initial stack pointer is set to the
TOP of the DCCM memory. Currently there is no SOC that
existing in Zephyr tree that sets CONFIG_HARVARD, but
this will be coming soon.
Change-Id: I2016d1f472fbdad683a964aa0b65c5263ecfb6cf
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Remove the symbolic link.
Update the Makefile.
Rename README as README.rst and restructure its content.
Change-Id: Ic74e91749fc0bbf728e528b49e99a87188f84e6d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The Arduino 101 board in Zephyr now support the original bootloader
and thus supports flashing over DFU. Adapt documentation and remove
reference to alternate bootloader which has been causing issues
and does not support flashing of the bluetooth firmware.
Jira: ZEP-301
Change-Id: I0298d8938bb636319b213909594d8cb42417559a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds support to handle incoming L2CAP information request from
remote to get local information about 'extended features' and 'fixed
channels'. For now local stack ensures support for L2CAP BR/EDR
signalling channel.
Change-Id: If8c9c9dd041b45a79db5e560394dcd2778176f55
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The function gets 32bits wide data, converts host order to little
endian and then puts the data on protocol stack to be send.
Change-Id: I29e4040b302a16b551a0922133c327ff694fec5d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Remove the homegrown sensor delayed work API in favor of using the
system-wide workqueue. Drivers still have the option of using their own
fiber.
In a second step, drivers can be refactored to start and use their own
workqueue.
Change-Id: I70dea6fc2abcbc9e04ac1ed3c837483a3d3c4424
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add a generic API for drivers to start workqueues and submit work
items. This is needed by drivers which need to schedule code that might
sleep from an ISR to run in fiber context.
Also add the option to start a system-wide workqueue.
Both additions are optional. They can be deactivated for systems that
do not need them.
Change-Id: Ia843568fde5daf6d4279ef7bf241c26c1e3dcfb7
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Call bt_conn_security() the same way it is done in upstream code for
NBLE. Currently use BT_SECURITY_MEDIUM as default sec level.
Makes at least following cases pass:
...
1/6 GATT TC_GAR_CL_BI_05_C PASS
2/6 GATT TC_GAR_CL_BI_17_C PASS
3/6 GATT TC_GAR_CL_BI_22_C PASS
4/6 GATT TC_GAR_CL_BI_27_C PASS
5/6 GATT TC_GAR_CL_BI_33_C PASS
6/6 GATT TC_GAW_CL_BI_06_C PASS
...
Change-Id: I2a0c177a187db931e88e2f82a5bda1c0cc04a112
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add driver for the Grove Temperature Sensor which measures ambient
temperature.
Sensor reference page:
http://www.seeedstudio.com/wiki/Grove_-_Temperature_Sensor
Change-Id: I4f56224be5fa7a968749d5d4df8cb99a462c3c21
Origin: original
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add driver for the Grove Light Sensor which detects changes in ambient light.
Sensor reference page:
http://www.seeedstudio.com/wiki/Grove_-_Light_Sensor
Origin: Original
Change-Id: I88ae20cc9faa8ab8f274b0bd7a114db5c1a87a91
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
We had wrong logic and confusing config options for debugging
Quark SE sensor subsystem. The new option will be used for GDB
debugging. The existing DEBUG option will be used for printing
additional messages on the screen while booting the sensor
sub-system.
Change-Id: Ia54d22e872edafe531ccde271e7504fe9c48a73a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moved comments from code to header.
Jira: ZEP-160
Change-Id: Ifd0f3c930289256e682b5941d77433aca3d3f941
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I962ce36b7e2361ea77ae4178bb7c86c19a241c4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I7688ca523915e3fa8a1d28dea7a1d84a66b39d56
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a notify_le_param_updated function to call registered
le_param_updated callbacks with new connection parameters.
Change-Id: Idd660f7ca024c2f7712a6a41a51db77e4fc82a00
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This issues connection parametrs update on new connection event,
to mimic Zephyr stack behaviour.
Change-Id: Ic3fa86a02ff9a5135a026dfff6d2fbfb890656c1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds implementation of bt_conn_le_param_update function.
Connection parameters can be only issued while in slave role,
because, nRF51 supports this procedure over L2CAP only.
Closes ZEP-222.
Change-Id: I2bb5f718b60b8be279f333c9721629662c029a32
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Use appropriate scope for 'random' and remove unnecessary empty lines.
Change-Id: Idb8d527fa0a88ca738e91887b56a123a5a8831ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
