Once all users of k_lifo migrate to k_queue this should no longer be
needed.
Change-Id: Ib8af40c57bf8feba7b06d6d891cfa57b44faad42
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes k_fifo functions rely on k_queue and port k_poll to use
k_queue directly.
Once all users of k_fifo migrate to k_queue this should no longer be
needed.
Change-Id: Icf16d580f88d11b2cb89e1abd23ae314f43dbd20
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This unifies k_fifo and k_lifo APIs thus making it more flexible regarding
where the data elements are inserted.
Change-Id: Icd6e2f62fc8b374c8273bb763409e9e22c40f9f8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It's not entirely clear where the '%P' came from, but the proper,
documented operand modifier for inserting an immediate value without
punctuation is '%c'.
Change-Id: I17346a6c70183ce79e91faa2fbe61e7761dfd513
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To secure correct signal levels on the pins by the UART when
the system is in OFF mode, the pins must be configured in
the GPIO peripheral as described in nRF5 Product
Specification.
UART Pin, Direction, Output Value:
RXD, Input, NA
CTS, Input, NA
RTS, Output, 1
TX, Output, 1
This commit sets the RTS line to a initial value of 1.
Change-id: I5147fe58033f42c979b9354798b6fd13d78f7f71
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
To avoid glitches in the lines, set the line to the pull specified
before actually changing the line's direction (in/out) so that no
unexpected pulses are generated.
Change-id: I4fe133c5b82f2a1bfa473341612c2c7eca9027b8
Signed-off-by: Krzysztof Chruściński <Krzysztof.Chruscinski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
If the DAD timeouts, then the pending pointer will be null
when we remove the neighbor. Fortunately this only prints
this error message and does not cause any issues in the code.
[net/nbuf] [DBG] net_nbuf_unref_debug: (0x00118350): *** ERROR *** \
buf 0x00000000 (nbr_clear_ns_pending():175)
Change-Id: I3e11d4aa1d90f205df591b5d5cdcf2ee7bde6c01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor the PHY state machine and add support for explicit start and
stop.
The stop implementation remains partial, the state machine will enter
a disabled state but will not actual attempt to power down the PHY.
This is deliberate, while implementing this it has become apparent
that issuing a PHY power down command is an effective way of bricking
frdm-k64f boards, hence explicit power down deliberately disabled
until the issue is properly understood.
Change-Id: I846a51b0ac48feed35d260cf20b50f4f1ac59298
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Documentation comments should begin with /**
Change-Id: I59867e8aad340dac4d66f86e09f4f8ae9d3d75fb
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Fix some style issues found at the src/main.c file.
Change-Id: I2023deb5ac4f31b2cf5d14d8313bbcfc03647898
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Move the client id define to config.h. Update the README file.
Change-Id: I1900c5e4f8c449e14279660d425501e86e07d409
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the global bluemix flag and use a #define to set the
MQTT publisher topic and its parameters at compile time.
This change will save a few bytes and speed up computations.
Change-Id: I27bfc6b38c73d32c6105f1d506e147e9a5583097
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
If IPv6 address is generated from Bluetooth MAC address,
then the Universal/Local bit must not be toggled or touched
at all. See RFC 7668 ch 3.2.2 for details.
Because this change is not compatible with older Linux kernel
BT IPSP support, the old behavior can be enabled by setting
CONFIG_NET_L2_BLUETOOTH_ZEP1656 option.
Change-Id: I05d48723b70f1eb60fbd46107ef6a2a4e8f9154a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It was assumed that the unit was microseconds, it is in miliseconds,
the same unit that is stored in the timeout field of the pending
transmission.
Change-Id: Ia99f363c7de4ec76a7ed229cb94a9964bcf609aa
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds retransmission support for confirmable responses sent by the
server.
Jira: ZEP-1732
Change-Id: I77c0c6375fa666e4cfdda4016ad1e0e90caf4ac9
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
It is possible that the buffer waiting for retransmission is modified
after it is sent, for example, it can be compacted by 6lo, and our
assumption of where is the message ID is located in the buffer is no
longer valid.
As the message ID is the only information that is necessary for
keeping track of retransmissions, we keep a copy of it in the pending
struct, as well as the destination address of the retransmission.
Change-Id: Id33d54353404628673541225a1a05e27ee08765f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This unit test verifies that zoap_packet_get_payload() returns the
expected size for received packets.
Jira: ZEP-1662
Change-Id: Ibe011959f4d6593f4f20f0f5901c9033c76c9518
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This implements the /.well-known/core resouce and two children
resources (/core1 and /core2) so the link-format feature is better
explained.
Change-Id: I9dd8c69040c952c5d12a9987c1966a71b0257ef2
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds the resource necessary for the TD_COAP_OBS group of tests.
Change-Id: I33bd09910f74db90ad0d713e4479ab2e3ec343a5
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Add the resource for the TD_COAP_BLOCK_04 ETSI testcase.
Change-Id: Ied901db34ce79d3e1f7f8c7fd55bc398b1f88640
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The functions that retrieve net_buf will wait forever until a buffer
is available.
Change-Id: I03ddd1239f50fe4467e86e31c8fbfc9b05c8b190
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When we do DAD (Duplicate Address Detection), the local IPv6
address gets added to the neighbor cache. This is useless so
remove it after DAD has finished.
Change-Id: I9625d367e96d8108a7d3d1d8b2e95f3c4ea11c45
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_ipv6_nbr_rm() utility function that can be used to
remove an IPv6 neighbor from the cache.
Change-Id: I9794856a4f65c5e943656970648e5c5762b0338c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function to go through all the stored neighbors
in the IPv6 neighbor cache.
Change-Id: I42fe0ec48c000215403aef63629d0763189ebdbb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sequence and identifier fields are 16-bit instead of 32-bit
long. This did not cause any issue in Echo-Reply but those two
fields should be set properly.
Change-Id: I5e4878f53d6bb37660d46d173159d27bbe0e94dc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP header was not sent back to originator when ICMPv6
error message was prepared to be sent.
Change-Id: I171bd724c4260b83d7d1c37e0894f9ed8cddd2c9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add the link type to net_if_set_link_addr() call. This fixes the
driver after changes introduced in
4eb2020055.
Change-Id: I72475a055ac805524b4b0f0c2380513e8f041368
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
- Let's build it with the various shell modules
- Make use of Kconfig.samples options
Thus: adding prj_server.conf and prj_client.conf to differentiate 2
instances of the app by their IPv6.
Then let's use samples/net/common/Makefile.ipstack
In the end, it is possible to build 2 times the samples this way:
make PCAP=154.pcap CONF_FILE=prj_server.conf server
and
make pristine
make CONF_FILE=prj_client.conf client
On client, or server, or both, shell commands can be used to ping each
other, check the statistics etc...
Once done, the given pcap file (154.pcap for instance) will have
recorded the traffic which can be parsed through:
wireshard 154.pcap
(Note: the "Malformed packet" warnings are not relevant, as the 15.4
frame FCS is a dummy one, it seems to make wireshark a bit lost)
Jira: ZEP-1774
Change-Id: I5590971660ecbfaac75af709124d59e1f98206fe
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
By default the net-tools package is expected to be located in
${ZEPHYR_BASE}/../net-tools directory. User can also specify
the directory using NET_TOOLS variable when running the make.
The net-tools package is located in this repository
https://gerrit.zephyrproject.org/r/net-tools
Change-Id: Ibccd7cabd567a630020fb9efbe1ec9e27b653b46
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If netcat is used with UDP, then one cannot press CTRL-c
as netcat returns immediately to the caller. For TCP the
CTRL-c is needed so move the note to TCP section of this
document.
Change-Id: I936a89e7a7ce8318602c3deae8513007a4620c80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit 81f85f4e4b.
Need a better solution for this, the patch itself does not solve any problem
and fails on many platforms that do not have I2C enabled.
Change-Id: I060e3d7a9992db8a1ece6da5e8d3a521f4052395
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 7b652b1f84.
Breaks on many boards.
Change-Id: Ie74e7a656094a54b999b99de9a462093525202c3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Depending on test environment, termination character could
be '/r' instead of '/n'.
Enabling both possibilities.
Change-Id: I18b47e9055667e0a4f868416ee8d01226a879712
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order for interrupt reset mode to work (reset the processor
after and interrupt) the interrupt does not has to be cleared,
and the qmsi hal layer clears the interrupt after the callback
has been invoked, the callback does not return and the processor
should reset.
Jira: ZEP-1566
Change-Id: Ic951a0f15fe95fb0ef5d752b831c62e6fa3ceea0
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is more portable and safer because device
name can change and the app does not need to change.
Jira: ZEP-1764
Change-Id: If8c14dd4eb186bace863432d454c9122461f2f9c
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
