Add samples config for nRF52840 with OpenThread
for echo_client and echo_server.
Add OpenThread to CI for echo_client and echo_server on nRF52840
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
Convert NXP k6x and kw2xd flash driver to use device tree to get the
flash controller name from device tree. We introduce yaml bindings for
the "nxp,kinetis-ftfe" and "nxp,kinetis-ftfl" devices.
Fixes: #5788
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Applies to #4008 and #5159 for this board. Problem is that the
button interrupt callback was only firing once. Solution is to
set the pin pull up flag to GPIO_PUD_PULL_UP.
Signed-off-by: Anders Pitman <tapitman11@gmail.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a simple UDP server application that will receive UDP data
and print various statistics like number of packets received and
dropped, amount of bytes received, and how many packets / sec
we were able to receive.
Currently the sample only provides a config file for FRDM-K64F board.
Note that this sample should not be run in QEMU as the performance
is very bad there because of SLIP link between Linux host and QEMU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The GPIO unit on the SAM0 is called 'PORT' which conflicts with the
name used in this sample. Rename to LED_PORT instead.
Signed-off-by: Michael Hope <mlhx@google.com>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Those are added by sanitycheck, no need to have them enabled in the
project by default.
CONFIG_DEBUG is causing issues on qemu_nios2, see #5743.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The demo can be configured to use different object types for its
synchronization, so test all of them.
The demo can also be configured to work with static objects or dynamic
objects, byt default the demo uses dynamic objects, add a test for
static objects.
Also, the demo can be configured to work with threads of the same
priority or not, so enable both options for testing
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not build for some unsupported architecture and exclude ARM qemu
platform due to bug #5735.
STACK_ALIGN 0x8
MPU STACK GUARD Test
Canary Initial Value = 0xf0cacc1a threads 0x200010e0
Canary = 0x20000240 Test not passed.
***** BUS FAULT *****
Executing thread ID (thread): 0x200010e0
Faulting instruction address: 0x209c
Imprecise data bus error
Fatal fault in thread 0x200010e0! Aborting.
***** HARD FAULT *****
Fault escalation (see below)
***** BUS FAULT *****
Executing thread ID (thread): 0x200010e0
Faulting instruction address: 0x1f4
Imprecise data bus error
Fatal fault in ISR! Spinning...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Evaluate output from sample and record success/failure.
Enable on other platforms, this should not be whitelisted.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The output of those samples can be parsed and verified by sanitycheck,
so lets use the console harness for this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample application allows to test vl53l0x distance sensor.
By default it is built with disco_l475_iot1 board as it is
built-in.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
The code couldn't really build with only CONFIG_NET_IPV4 or
CONFIG_NET_IPV6 enabled, because some parts weren't covered
by #ifdef's. Regroup the code to get it covered.
Also, improve error/notice messages.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
By default CONFIG_MPU_ALLOW_FLASH_WRITE=n so the example must have been
falling on any write to flash.
This patch adds CONFIG_MPU_ALLOW_FLASH_WRITE=y to project configuration.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This sample implements a custom module, so rename it to allow for other
samples with specific features.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to be able to document the build on Windows and UNIX
systems, slight variations are required on the app commands
that are used throughout the documentation system.
This includes getting rid of the prompt symbol and providing commands
for both UNIX and Windows operating systems.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add configuration for zperf sample allowing to build USB dongle with
zperf for testing.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
At the moment CONFIG_SYS_LOG_USB_LEVEL name does not specify that this
is log level for the Device Stack. Make it clear renaming to the
proper name.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove SPI_*_IRQ_PRI from tests and samples.
Using DT to get the *_IRQ_PRI, we can't
override it using Kconfig.
If needed, use a BOARD_NAME.overlay file to
override default values.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Since no GPIO trigger is configured in hts221 sample application,
update prj.conf to enable TIGGER_NONE flag
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A very old reference to former net stack was still lurking around.
Removing it.
Taking the opportunity to clear up dependencies.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Having a library being GLOBAL, although not default behaviour, or
necessary for the sample, is expected behaviour for a library. It is
expected that like normal libraries, the target name will be
accessible from outside of the CMakeLists.txt file that created it.
Since samples are used as reference code, we specify GLOBAL so that
libraries are created with this intuitive behaviour.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The basic/threads sample is printing a log that looks like this:
Toggle USR0 LED: Counter = 0
Toggle USR1 LED: Counter = 0
Toggle USR0 LED: Counter = 1
Toggle USR0 LED: Counter = 2
Toggle USR0 LED: Counter = 3
Toggle USR0 LED: Counter = 4
From that log you would think that it was logging when leds were
blinking, but actually the led-threads might have crashed, and it
would just continue logging anyway. All it's doing is executing
printk's at roughly the same frequency as the LED's are blinking.
This patch rewrites the sample to use a FIFO so that the printk's only
trigger if the LEDs are actually blinking.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Depending on a path inside the Zephyr tree to determine if we are a test
does not scale. Also some samples were marked as TEST while they are
not, just to get some options defined for tests.
Idenitfying a test will be addressed in another patch introducing
CONFIG_TEST.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Michael Hope
