APIs now follow Zephyr OS naming conventions.
Change-Id: I554e63b989029e08a1d215c9b5a511a32a91e42c
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
APIs now follow Zephyr OS naming conventions.
Change-Id: I154536d2c40784ae83a936c55cf748173343c681
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The following APIs now use an approved Zephyr OS prefix:
_pipe_init
_mem_map_init
_mem_pools_init (also loses plural aspect)
init_node
init_drivers
kernel_init
kernel_idle
Change-Id: Ic380c56b09cb870d44c51fd12c6c0e0a13e9b4e3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I3ec6d3ac3a3b7ae2edd1024a39ce73796f060fba
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I79c7e82e73653315ba1a609edbf11336694b9dd4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I1041b982492ea7b76213e3b57cf28a9f17e7fd9d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These declarations do not need to appear in minik.h, since it
already gets them by including kernel_main.h.
Change-Id: I35ff9cc2d371c60a08a7cf8bde289f467a259dea
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These routines are only referenced in a single file.
Change-Id: I55d2976d1db612bdbb89224b89b84bfcc5b9d707
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These 3 declarations no longer appear twice in the same include file.
Change-Id: Ia77b84c29741978bea2d74b44d66e9929d2769c4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates confusing references to "channel", and improves
readability of project output.
Change-Id: Ib4f699caae5a015832207a408bd168903e791756
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- Removes unnecessary comment about API being private.
- Removes misleading comment about processor-specific APIs.
- Makes purpose of "service codes" clearer.
Change-Id: I4715609f328b9fa7f334a1b4c3c21441111f228d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: Ia16829d908da9bfaa82f82da47b583a0004cae7d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This API is now a private microkernel API.
Change-Id: I5b26aa927d42923f2076d06f9bdfef371572543e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the system generator pre-registers K_ticker as the handler
for the system tick event, there is no need for the timer driver
to re-register it at run time.
Change-Id: I7f20c19e5c6ccc7dfb6117aa2d2647b9dec0e549
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new build system no longer uses this directory, since it rebuilds
the (minimal) standard C library every time a project is built.
Change-Id: I1ca6b949bfa260f1d262276be653ddd6bd1cc53b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no longer any need to retain any support for this option
as a "do nothing" for backwards compatibility reasons.
Change-Id: I4b8fa727f80effdcc3fd92007fc9c50654291175
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Allow the delevoper to specify the address of the driver instance data
object at build time.
Change-Id: I6b311cfc4d38b3425f6283d87d2da65aceb42faa
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
conn was never set in struct flush_data passed to flush_cb.
Change-Id: I2a16479bf7660a96f705d1194245da02ee6eeff5
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
The source is included to the manual and putting more comments helps
to understand the code.
Change-Id: Iefd6db2abf6070fd8c3fabdaf4946bdd7a045544
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Functions bt_init and bt_start_advertising are referenced in the
doxygen documentation. Documenting them gives better overview.
Change-Id: I70cb19a0a3232ce5abfb22c3a352bf3868c6f8fb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes compile errors:
...
Makefile:36: /make/env/defs.base: No such file or directory
Makefile:47: /target/make.ukernel: No such file or directory
make: *** No rule to make target '/target/make.ukernel'. Stop.
...
Change-Id: I693a939510b732ac810d5af756422c58e3f0c3ab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix typo and reformat test to make it more logic and reflecting
doxygen documentation.
Change-Id: Id869f0131132c9287eab71d11ae40d194a20ca20
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add BT_GATT_CEP and BT_GATT_LONG_DESCRIPTOR so which can be used by
a task to declare long attributes.
Change-Id: I37a0bb1851b60f3cdfa7e2f00ade70d5c344abbf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Characteristic Extended Properties has 16 bits not 8 bits as value.
Change-Id: I307fd27a6d589d6614829df178ff890301a9b6be
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduce a new callback called flush to bt_gatt_attr to indicate
when and attribute can cache data, the data is automatically flushed if
regular write request happens and in case of prepare write it checks if
flush is supported otherwise return an error, then upon receiving an
execute write it perform flush over the entire database and respond
with result:
< ACL Data TX: Handle 42 flags 0x00 dlen 6
ATT: Execute Write Request (0x18) len 1
Flags: Immediately write all pending values (0x01)
> ACL Data RX: Handle 42 flags 0x02 dlen 5
ATT: Execute Write Response (0x19) len 0
Change-Id: I2c47f962858b8a741bf40509a648fe2cd6755691
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of new guidelines to document the GATT API.
Change-Id: I5544f449e11dd72c68b0efb15bd06db44ec30279
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a connection is made, track its role.
Only peripherial/slave role may trigger update of L2CAP connection
parameters.
Change-Id: I72244581650248c7b020c9e5673b73ce46e7399d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Call attribute write callback taking into account the signature length
so only the actual data is used.
Note: It still don't support validating the signature because that depend
on storing CRSK key.
Change-Id: I93973e2997f57e5715080ef56ad85e0eaf11d0fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This application is intended for automated testing. It used binary
protocol for communication over UART and can be used for driving
Bluetooth stack by external tester.
Currently only single command registering (init) GAP service is
implemented.
Change-Id: I62e151baa2badc0f1297e65591b5f494ff7b841e
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This reduces the amount of code necessary to check minimum size and
to generate error responses.
Note that not every response can be generate using this method since in
some cases the handle must be set to indicate what attribute has failed.
Change-Id: I0dde7461d97e451407935d5ec3cbfedf6542d5e6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says that CCC shall only be persistent accross connection for
bonded devices:
'The Client Characteristic Configuration descriptor value shall be
persistent across connections for bonded devices. The Client Characteristic
Configuration descriptor value shall be set to the default value at each
connection with non-bonded devices'.
To handle this now each configuration has a valid field indicating if the
configuration is valid.
Change-Id: Id74ac54f5e23a7a0b286f90dbc9af4e9ee966dd4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
LD microkernel.elf
samples/bluetooth/peripheral/src/built-in.o: In function
`mainloop':
samples/bluetooth/peripheral/src/main.c:514: undefined reference
to `sys_rand32_get'
collect2: error: ld returned 1 exit status
Change-Id: Idec91d59fd98ec06f5e5728238cf9d9f6c37eb87
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This fix following compilation error if CONFIG_BLUETOOTH_DEBUG_SMP
is defined:
In file included from net/bluetooth/smp.c:44:0:
net/bluetooth/smp.c: In function 'bt_smp_irk_matches':
net/bluetooth/smp.c:681:31: error: 'val' undeclared
(first use in this function)
BT_DBG("IRK %s bdaddr %s", h(val, 16), bt_addr_str(addr));
Change-Id: I3350620f1f7dc929b949b4483178df66dde55198
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add battery level simulation decrementing from 100% by one every
second.
Change-Id: Ic6b819c32b42d65a044223f22e301835510823a4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This was causing output such as bellow:
bt: bt_gatt_attr_write_ccc: No space to store CCC cfgbt: bt_gatt_attr_write_ccc: No space to store CCC cfgDisconnected
Change-Id: I8aff67b9c4b407e8a2da939c27bea05a597dcf67
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Manufacturer Name String in DIS is a mandatory feature for Heart Rate
profile as specified by HEART RATE PROFILE Spec.
Change-Id: I552b51b68012edfc4389604e91dd43b8b54fe65f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Heart Rate simulation using 1 second sleeping loop and this is how
it is recommended in the Heart Rate Service Spec.
Change-Id: I1023a4089bc661a399acf865f4fc7afaf72b8f0f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This registers two simple callbacks for connection and
disconnection events.
Change-Id: I9e1f87d9e1a3c8ef457e15a1c30396fba7f7df4a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds callbacks to notify app about connection and disconnection.
Change-Id: If8091254d929fe53d12b153e6f216223a8913f2d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This checks if connection encrypt flag is set if attribute requires
encryption and in case the connection is already encrypted return
success.
Change-Id: I8af4e9786b63a21f478b3aa9f6df448d7f5760c5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Respond with an error if attribute read/write return an error.
Change-Id: I9c2f98ac4b73bca5d3714339a47290ca9ae2391b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the introduction of the Number of Completed Packets event
handling this FIFO & fiber aren't anymore strictly HCI command
completion related. Rename them therefore to something that more
appropriately describes their purpose.
Change-Id: Ia53dea8b5ec0098459f23918a5483075757d9202
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
