This commit moves the block of the early return before
the derivation of the stack size, to avoid unnecessary
operations if this is not a user thread.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In user mode a thread stack will include the optional
stack guard area (present if MPU_STACK_GUARD is defined.
The guard area has been originally take out of the thread
stack size calculation. For MPUs with no power-of-two size
requirement, we need to increase the size of the MPU region
for user-mode, to account for the additional guard region.
MPUs with power-of-two size requirement will, anyway, round
up the region size to the next power of two.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This enables the USBHS interface on the Atmel SMART SAM E70 Xplained
Board, by adding an entry to the DTS. It also updates the documentation
and mark usb_device as supported for the tests.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds a USB device driver for the USBHS device that can be
found on Atmel SAM E70 SoC family. Only the FIFO mode is supported
(as opposed to DMA). It supports LS, FS and HS modes, but defaults to
FS mode as Zephyr does not fully support HS mode yet.
Tested examples on an Atmel SMART SAM E70 Xplained Board:
* usb/cdc_acm
* usb/hid-mouse
* usb/mass
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When Python3 is not found the build system will warn the user and then
continue. Python3 is required and continuing can only confuse the user
with new off-topic error messages.
This patch denotes Python3 as required to resolve this.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fallback to L2CAP Connection Parameters Update Request if LL Connection
Update Request was rejected by remote device that has this marked as
supported in features. This can happen if procedure is supported only
by remote controller, but not enabled by host. This is connection
parameters update with iOS devices.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Some places are using the same tag identifier with different types.
This is a MISRA-C violation and makes the code less readable.
MISRA-C rule 5.7
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
According with MISRA-C and unconditional break statement must
terminate every switch-clause.
MISRA-C rule 16.1 and 16.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Other ST boards have their openocd.cfg support file updated,
but Nucleo L476RG was still looking for board/st_nucleo_l476rg.cfg
and fails with Zephyr SDK 0.9.5.
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
Add support for out-of-tree shields. Out-of-tree shields can now be
stored in out-of-tree board directories.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Application shared memory API uses 'appmem_' prefix for
its functions and macros. This commit updates the respective
documentation to align with the API convention.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some minor style and typo fixes in
tests/kernel/mem_protect/userspace/src/main.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add clocks property in stm32l4r5 devices.
Replace i2c2 node by i2c3 node in l4.dtsi as i2c3 available
in all stm32l4 SoCs while i2c2 is not available in some parts.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Peripheral drivers are already available but cannot be enabled trough
Kconfig. This allow project to use nrfx drivers.
Signed-off-by: Christopher Métrailler <christopher.metrailler@nordicsemi.no>
The way the code is structured the buffer is always guaranteed to be
large enough, however perform explicit termination anyway to avoid
Coverity warnings.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code had somehow gotten corrupt (yet in a way that it compiles) so
that an intended if-branch was missing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
i2c_burst_read can fail during read/write procedure. Therefore,
add a sanity check for its return value.
Fixes#11101
Coverity-CID: 189505
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Options "-clock dynticks" and "-balloon none" are deprecated and
produce warning in recent Qemu versions, so remove them.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add myself and Julia Lawall as the maintainer of Coccinelle
Infrastructure.
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Logger is designed with assumption that address fit in 32 bits.
Added explicit compilation error on 64 bit platforms.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This makes it possible for the application to enable building of the
GPIOTE and PPI subsystems in NRFX.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Add dts binding and info for TRNG device and enable basic support to
get the device name from DTS. We leave for now the base addresses
coming from the MCUX HAL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add dts binding and info for RNGA device and enable basic support to
get the device name from DTS. We leave for now the base addresses
coming from the MCUX HAL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have DTS support for an entropy driver we should get the name
generated from DTS ('label' property on the entropy device node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow directly calling the flash partition extraction function and
remove passing any arguments that the function doesn't actually use.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworked flash partition extraction so we call it when we see a
node that is 'partiton@' instead of per property. We also handle the
'read-only' property in the flash partition extraction function which
lets us remove 'use-property-label' handling.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't have any cases that need 'use-property-label' related to
handling of reg extraction so lets remove it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
No need to evaluate what's the ll reserve size here as net if has a
function to do so.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Tweak ROM usage of quark_se_c1000_devboard so that test_usbnet
test will pass. The board just disables network statistics as
that is not really needed here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that if network packet destination IPv6 address is
interface local scope multicast address FF01::, then those
packets must routed back to us when sending them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the destination IPv6 address is interface local scope multicast
address FF01::, then loopback those packets back to us as that is
the purpose of those addresses. They are to work same way as
localhost unicast address. See RFC 3513 ch 2.7 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 is disabled, then we can skip IPv6 checks and avoid
Coverity warnings. Same thing for IPv4.
Coverity-CID: 189506
Fixes#11100
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function just stores the buffer pointer passed, so explicitly
mention that the buffer must remain valid while netif itself is
valid. For example, it can't be stored on stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This will exclude GATT Client response handlers from compilation
if GATT Client support is disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The API documentation for networking.rst can throw a doxygen warning
depending on the versions of sphinx/breathe being used.
Fixes: #11111
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
