Each shell thread will have unique name.
Previously thread name "shell" has been created for each shell
backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The commit 0c2ef4ea3d "drivers:
watchdog: Watchdog API redesign" introduced an API redesign for the
watchdog drivers compliant with Zephyr.
This patch updated the CMSDK Watchdog driver to be compliant with the
new API.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Convert the Atmel SAM0 watchdog driver to the new watchdog API and
enable DTS support.
This fixes#10914.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add IMX IPM sample application. It reads the data sent to the
Messaging Unit and sends them back. It has been tested on Udoo Neo Full
board with the Cortex-A9 core running Linux and sending the data
into the Messaging Unit A and the Cortex-M4 running this sample Zephyr
application and reading the data from Messaging Unit B and sending it
back for Linux side to read it from Messaging Unit A.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Enabled Messaging Unit B in Cortex-M4 core of Udoo Neo Full board
so it can use IMX IPM.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add Messaging Unit B peripheral support for i.MX6SoloX soc so it can
use IMX IPM.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add driver for i.MX Messaging Unit peripheral which can be used for
i.MX6SoloX, i.MX7D and other i.MX socs.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Default for a unavailable cell name was an empty list, whereas a
given name is a string. Leads to a runtime error if the name is given.
Make the default an empty string.
Names for cells are taken from the yaml binding. The key used is
"#cells" which clashes if there are different cell based properties
for a device. Readout names from the more specific "#xxx-cells" if
given and fall back to "#cells" if not given.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Not pretty to change the PAD name from 2 to 1 as the correct
is PAD2 but for the SAMD20 the register value is 1.
Fixes: 6d08958ad5 ("drivers: uart_sam0: move sercom pad info to dts")
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Add .clang-format style from linux kernel to allow easier
style formatting for developers that do not use uncrustify.
You can call "clang-format -style=file -i my_src.c" within the repo
to in-place fix the style.
Signed-off-by: Håkon Alseth <haal@nordicsemi.no>
Add new, socket based MQTT implementation, based on MQTT from Nordic
nRF5 SDK, introducing the following features:
* transport independent MQTT logic, with support for multiple transports
* support for multiple MQTT versions (3.1.0 and 3.1.1 supported)
* single event handler - no need to keep callback array in RAM
* automatic send of Ping Requests, for connection keep-alive
* message/event parameters wrapped into strucutres - easier extension
for future MQTT versions
* no separate thread needed to run MQTT - application only needs to call
mqtt_input and mqtt_live periodically
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The show_sensors_data() function tries to access val[2] when
outputting the Z-axis value, so the array must have at least three
elements. This also triggered Coverity CID 189741.
Fixes#11482
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This comparison was always supposed to be > rather than >=. Fixing
this also fixes Coverity CID 189740.
Fixes#11483
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When issuing LE Set Data Length Command host should not assume that
LE Data Length Change Event will be generated. From Core Spec 5.0:
"If the command causes the maximum transmission packet size or maximum
packet transmission time to change, an LE Data Length Change Event
shall be generated."
Change-Id: I17723b58ed4f390aa465db3f69126ee229871123
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
If master or application decided to switch connection parameters to
ones that meet pending parameters don't bother sending request
after 5 seconds timeout.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Update Kconfiglib and menuconfig to upstream revision d3866958c7685, to
add various improvements:
- Support HOME and END in the jump-to dialog in the menuconfig. END can
be handy as choices, menus, and comments appear at the end.
- Add more fine-grained warning controls for multiple assignments to a
symbol in configuration files. Use it to simplify kconfig.py a bit.
Clean up kconfig.py a bit in other ways too, e.g. by removing unused
imports.
- Improve Kconfig parsing performance slightly
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
RTT and uart shell backends were started with fixed
log limit set to INF. Configuration has been moved
to Kconfig allowing certain level or default LOG_MAX_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This reverts commit 18f9bb04f7.
This breaks with cmake 3.8.2, the minimal required version we have in
all of our cmake files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's expand the sanity build testing for the lwm2m_client by
doing the following:
- Add variant builds for DTLS, bluetooth and modem
- Check various combinations of hardware across each of these
variant builds: frdm_k64f, nrf52_pca10040, nrf52840_pca10056,
disco_l475_iot1
Signed-off-by: Michael Scott <mike@foundries.io>
When the WNC-14A2A modem binding was originally introduced, I thought
the base_label would shorten the define keeping the result short and
easily portable. Turns out with the latest changes, it has a side
effect of removing the "DT_*" prefix which is breaking the build.
Let's remove "base_label" from the modem binding and adjust all of
the dts_fixups referring to the WNC14A2A defines.
NOTE: This commit moves the left-over WNC14A2A dts_fixup defines from
the nRF52 soc into samples/net/lwm2m_client as the new values.
They will stay there until the modem can be re-configured as a shield.
Signed-off-by: Michael Scott <mike@foundries.io>
During the modem overlay move from the K64F board directory to the
LwM2M sample code, 2 DTS entries were dropped:
current-speed = <115200>;
status = "ok";
Without these entries the DTS defines for UART2 and CURRENT_SPEED
are missing from the generated_dts_board.h file.
Signed-off-by: Michael Scott <mike@foundries.io>
One of the most common issues I've had to deal with as people are
starting to try west is that bash has cached the 'west' binary to the
version in zephyr/scripts/west after they ran zephyr-env.sh on Unix
operating systems.
This makes people (correctly) think they are running an older version
when they get output about missing clone commands, etc., but doesn't
give them any hints about why that happened, because most people don't
know that west is already in widespread use for flashing and
debugging.
To make fielding support for these users easier while we're
transitioning, print a notice at the end of the copy informing users
what just happened. We can make it more forceful as time goes on.
Signed-off-by: Marti Bolivar <marti@foundries.io>
dtc produces the following warning:
Warning (simple_bus_reg): /soc/itim@8000000: simple-bus unit address
format error, expected "0"
We had the wrong unit address in the dtsi file, should be 0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
dtc was producing this warning when we build on SAMD SoCs:
Warning (simple_bus_reg): /soc/nvmctrl@41004000:
simple-bus unit address format error, expected "40022000"
The reg addr isn't used by the flash_sam0.c driver so we wouldn't notice
this issue. Looking at the atmel HAL we see:
#define NVMCTRL ((Nvmctrl *)0x41004000UL)
So that provides confirmation of what the reg addr should be.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kinetis device K64F's PTP interrupt crashed the system becase it was not
generated from dts. Device interrupt correctly set now.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Now all tests are additionally run in user mode.
Test now all use the i2s_buf_read/write APIs, which
are themselves implemented in terms of i2s_read/write.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If the configuration is already installed, there will no need to
reconfigure the controller all over again.
This was missing for mcux_dspi, mcux_lspi, sam and sam0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
c++ does not allow implicit conversions and setting -fpermissive just
causes a huge load of warnings to appear and hides real errors.
This commit converts those implicit conversions to c-style explicit
conversions.
Signed-off-by: Alexander Polleti <metapsycholo@gmail.com>
Added support to the ti,cc2520 binding for optional GPIO signals and
moved the quark_se_c1000_devboard to define those signals in the DTS.
This lets us remove board.h and some #defines & fake Kconfig symbols
from the quark_se_c1000_devboard board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The CC2520 device is specific to the quark_se_c1000_devboard not the
intel curie SoC. Move the device node where it belongs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that the in tree user of cc2520 uses device tree to configure SPI
and GPIO params, we can remove and convert the driver to utilize DT
only. This means removing the Kconfig options that come from DT and
rename CONFIG_ to DT_ for those options.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all SPI controllers support DTS we can remove the Kconfig
support for non-DTS options. We also cleanup some defines that should
have be DT_MCR20A_ instead of CONFIG_MCR20A_.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The majority of cases of CONFIG_I2C_x_IRQ_PRI should be
DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios
driver still uses Kconfig for getting priority.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
