Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Update the http_get sockets sample to enable association of secure
tags with certificate filenames.
This allows certificates and keys to be provisioned to the file
system on secure flash, without having to include the actual
certificates in the application.
Validated on the cc3220sf_launchxl board.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Implements setsockopt() for the socket offload driver
to process the TLS tags sent in via the Zephyr setsockopt() API,
when CONFIG_NET_SOCKETS_SOCKOPT_TLS is chosen.
For each tag, the credential filenames are retrieved and
set via SimpleLink's sl_SetSockOpt() API.
Also, creates a new KConfig option for TLS_CREDENTIAL_FILENAMES.
This new option is used by apps/protocols to add TLS credentials
via filenames referring to the actual content stored on a secure
file system or flash.
Handles the IPPROTO_TLS_* socket protocol families in the
socket() offloaded API.
This was validated on the cc3220sf_launchxl with the http_get sockets
sample, with the globalsign_r2.der file loaded to secure flash via
the TI Uniflash tool, and using the TI Catalog of known good
root CA's.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
There are different interrupt numbers for R22 v R23. Before this was
being handled via using Kconfig symbol CONFIG_BOARD_EM_STARTERKIT_R23 in
emsk_dt.h. Since we want to remove use of Kconfig in dts we handle this
via different dtsi files and having the proper one included by the
proper board revision dts file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Towards removing Kconfig from DTS we need to move setting of the sizes
of ICCM/DCCM into the SoC specific DTS files and out of emsk_dt.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
net_rpl_get_interface() function which returns always NULL is
defined if NET_RPL is not enabled. so remove deprecated tag to
this particular function. Otherwise it will cause unnecessary
compilation warnings.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Including Bluetooth to every project unnecessary increase size of the
project, for example hello world sizes:
Memory region Used Size Region Size %age Used
FLASH: 48492 B 1 MB 4.62%
SRAM: 11236 B 256 KB 4.29%
IDT_LIST: 136 B 2 KB 6.64%
after the patch:
Memory region Used Size Region Size %age Used
FLASH: 13344 B 1 MB 1.27%
SRAM: 4004 B 256 KB 1.53%
IDT_LIST: 72 B 2 KB 3.52%
3+ times difference.
PS: It also crashes when 802.15.4 enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Log_output module was always postfixing printk strings
with '\r'. If printk message did not ended with '\n'
it lead to last printk message being overwritten.
Fixed by adding '\r' only when string was ended by '\n'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add documentation for the quark_se_c1000_devboard with links to platform
guidelines and other details.
Fixes#11166
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Cortex-M7 CPU included in the SAM e70 SoCs has a data cache that
significantly boost the performances. However the SAM GMAC Ethernet
driver is using a scatter-gather technique to exchange data with the
Ethernet driver. This requires the use use of a non-cached memory area.
This is currently not supported on Zephyr, but support for it is being
discussed in PR#11199.
In the meantime, enable the data cache during the SoC initialization,
unless the SAM GMAC Ethernet driver is enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Cortex-M7 CPU included in the SAM e70 SoCs has an instruction cache
that significantly boost the performances. Enable it during the SoC
initialization.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Enable cache operations before starting a DMA operation if the CPU has a
cache. All the support was already in place, it just needs to be
enabled.
With the previous commits, it allows the I2S tests to pass on a SAM E70
Xplained board with the CPU cache enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The memory slabs used for I2S are used through DMA. In case the CPU has
a cache, we need to ensure minimum alignment so that an entire number of
cache lines can be cleaned or invalidated.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Shell log backend was using k_fifo to enqueue log messages.
It was using field in log message that was used for same
purpose in log_core before passing message to backends.
However, this method supported only single shell as
other shell was corruption the fifo because field was
reused.
Modified shell log backend to use k_msgq for pending
messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This effectively reverts part of earlier 49bb163756 which moved
interrupt acknowledgement until after return from the user callback.
This was done confusing the flow of this driver with how some other
drivers do it, where pending interrupt status is checked by
uart_irq_rx_ready()/uart_irq_tx_ready(), which should be called by
the callback. But the uart_cmsdk_apb driver actually uses different
hardware register in these functions. And acking IRQs after user
callback can lead to race condition and losing an IRQ, and the
simple fix in this case is just move acknowledgement to where it
was before.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Nordic USB driver shim uses nrfx_usbd driver from nrfx package.
The driver was protected by a semaphore during every transfer
to prevent access from multiple threads at the same time.
This leads to the problem when a class schedules transfer on one
endpoint before host asks for the data (to be sent later) - driver
is locked and other endpoints (including control EP) are blocked.
Currently, only driver calls are wrapped with semaphore without
waiting for the transfer to complete, allowing scheduling transfers
on different endpoints. This is allowed bu nrfx_usbd, however
shim prevents user from scheduling multiple transfers on one
EP (required by nrfx_usbd).
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Accourding to Bluetooth specification the Service Changed
Characteristic shall not have its handle changed once it has been
bonded, so this moves the GATT service to be the very first service
registered that way it is guaranteed that it won't change even if
device is flashed with a different configuration which end up changing
the handles after it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Calling fifo_fill function from uart_nrfx_uarte in the same
interrupt more than once, would break previous transmission.
Following fix adds checking if previous data was sent, and
if not, returns 0.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
It is related to b904ad387f.
This fixes checking ECDH related events in event mask.
If ECDH support is disabled in host, there is no need to check
if those are supported in the controller.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Running tests compiled for 64bit architecture were causing errors
in logger module. Updated unittest.cmake to build tests only
for 32bit architecture.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
System Power Management is only supported in Tickless Idle mode.
This patch modifies Kconfig dependencies to ensure System Power
Management option selects Tickless Idle one.
Fixes: #11046
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Currently shell UART backend is interrupt driven if UART driver
is interrupt driven. That can be limitation if one instance
wants to use interrupts but shell UART should not.
Added option to shell uart to be able to control use of
interrupts. By default interrupts are enabled if driver
supports it.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix false passed on localized error message in make invocation.
Fixes#8348
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added description how to build, programm and see console output of
hello_world example on cy8ckit_062_wifi_bt_m0 board.
Signed-off-by: Oleg Kapshii <oleg.kapshii@cypress.com>
This option is useful to have for a flatter hierarchy for one-off SoCs
that aren't split into family and series from the silicon vendor
perspective.
The commit saying it was going to go away is from 2 years ago; it
hasn't happened and it doesn't seem to need to happen. Just delete it.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The Interrupt Controller on the Quark D2000 doesn't support irq priority
to just pass 0 in the for the priority instead of CONFIG_ADC_0_IRQ_PRI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We were hard coding the SPI bus name to "SPI_3". Instead we should use
DT_INVENTEK_ESWIFI_ESWIFI0_BUS_NAME as its generated from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The driver was using the straight alias generated defines, however we
want to use DT_ prefixed defines so its clear that the values are coming
from DT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit will take back changes made by previous commit
i.e. fad8ff39c3.
This is beacause k_sleep() based delay is not behaving as
expected while testing & take more time than expected.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The EFM32 Pearl Gecko Starter Kit contains sensors and
peripherals demonstrating the usage of the EFM32PG MCU
family. This patch adds basic support for this board
and is copied from EFM32WG-STK3800.
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This ensures compatibility with Silicon Labs EXX32 MCU Series 1.
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
The Silicon Labs EFM32 Pearl Gecko MCU includes:
* Cortex-M4F core at 40MHz
* up to 1024KB of flash and 256KB of RAM
* multiple low power peripherals
Ported from EFM32WG:
https://www.silabs.com/documents/public/application-notes/an0918.0-efm32_to_efm32jgpg_migration_guide.pdf
Signed-off-by: Gil Benkö <gil.benkoe@pm.me>
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For the EFM32PG12B, the define _EMU_EM23PERNORETAINCTRL_VDAC0DIS_MASK
is not availabe. This commit guards its usage with ifdefs.
This might be a bug in the gecko SDK or some version incompatibility
in the used files.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
