Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
After receiving FIN, the TCP stack will send a FIN and start
a timer to track the reception of the associated ACK. In case this
ACK is never received then the context will be released
without calling the associated received callback which leads to
upper layers not being informed that the connection was closed.
This issue was observed when using sockets, the effect is
that in this case the socket would never be closed and stay
in limbo forever.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The WNC-M14A2A modem is supposed to use HW flow control on the UART
connected to the MCU. In the past, we were able to bypass this
requirement by using only the LTE-M firmware which supported pulling
the CTS line high via "send-ok" gpio.
This does NOT work for the LTE firmware.
Now that MCUX UART driver supports hw-flow-control setting, let's use
it in the modem overlay so that regardless of modem firmware
(LTE vs. LTE-M) the sample will "just work".
Signed-off-by: Michael Scott <mike@foundries.io>
Now that a hw-flow-control DTS binding has been added for MCUX uart,
let's check for the DT_ define and enable support in the MCUX HAL
layer.
Signed-off-by: Michael Scott <mike@foundries.io>
Support for HW flow control was recently enabled in the NXP MCUX
HAL layer. Let's add a DTS binding definition for "hw-flow-control".
The MCUX uart driver shim can use this to enable HW flow control.
Signed-off-by: Michael Scott <mike@foundries.io>
The relationship between lwm2m_engine_context and lwm2m_message
has always been a tenuous one. Let's merge the 2 structures
into lwm2m_message and remove all of the extra stack variables.
This change increases SRAM usage slightly due to the
addition of the context structures to the multiple lwm2m_messages.
However, the way lwm2m_engine_context was being used off the stack
was probably creating hard to debug issues in the longterm.
Also, having all of the structures in 1 place makes sharing them
much easier later.
Signed-off-by: Michael Scott <mike@foundries.io>
Reported by Github user himanshujha199640 using coccinelle:
subsys/net/lib/lwm2m/lwm2m_obj_device.c:172:5-16:
WARNING: Unsigned expression compared with zero.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/11135
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
Convert ssd1306 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-i2c" from compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ssd1673 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-spi" from compatible.
Fix up references in reel_board dts and sample.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make sure we capture data from gcov and do not timeout before all the
data has been captured. Also report on incomplete data capture.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building with older versions of the toolchain we need to use gcov
from the same tool set, otherwise data formar might not be compatible.
Added an option to point to the gcov tool from the same toolchain used
to build the code. By default the host gcov is used.
Relates to #12571
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The app shared memory macros for declaring domains provide
no value, despite the stated intentions.
Just declare memory domains using the standard APIs for it.
To support this, symbols declared for app shared memory
partitions now are struct k_mem_partition, which can be
passed to the k_mem_domain APIs as normal, instead of the
app_region structs which are of no interest to the end
user.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert the lpd880x driver to use device tree and new DT_<COMPAT>
defines. Support both LPD8803 & LPD8806 device tree compats.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
SNTP client sample requests time sync on IPv4 and IPv6 addresses
using socket based SNTP client library.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add sam0_rtc_driver that implements system timer API on top of the RTC
and can be used as a replacement for the default systick timer.
Signed-off-by: Martin Benda <martin.benda@omsquare.com>
When this syntax is used for the type definition:
hex "TEXT section offset"
Kconfig expect the user to enter the value for TEXT_SECTION_OFFSET and
the defaut value for BOOTLOADER_MCUBOOT is not used. Changing the syntax
to this:
hex
prompt "TEXT section offset" if !BOOTLOADER_MCUBOOT
will tell Kconfig that TEXT_SECTION_OFFSET will not be set by the user
when BOOTLOADER_MCUBOOT is set and then Kconfig will use the default
value.
Signed-off-by: Ole Sæther <ole.saether@nordicsemi.no>
The "register" keyword was deprecated since C++11.
Add -Wno-register flag for avoid warning, with recent version of C++.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
This belongs in the implementation file that references the array, since
the header is included in multiple files.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Setting bit 3 instead of bit 2 modifies a reserved section of the
register, with the impact that the ODR is not as configured.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Commit 41f86c3db2 ("nvs: fix warnings in logger") wrongly changed the
"%d" into "%x" while it was only supposed to suppress the warning.
This patch switches back the format string to "%x".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Function char_replace is only used in shell_ops.c file.
Added keyword static to function definition and removed
declaration from shell_ops.h
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Meta keys are active when they are enabled and when shell echo is set
to on.
Updated meta keys description in shell's Kconfig file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The pins connected to the sensors and microsd card on board
were mapped to SPI_0 and I2C_0, but for nrf52 chips they
cannot both be used together.
Blip is yet unreleased, so change will not affect anyone really.
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
Extended native posix backend to support new backend API for
'in place' mode.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add test to log_output module. Test suite covers usage of
log_output_string function.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added functions for processing log string and hexdump. Details
are passed as function parameters and not as log_msg. Those
functions can be used when logger works in synchronous mode
and log messages are not created.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit removes the local state variable nxp_mpu_enabled,
defined and used in NXP MPU driver, as it is not useful.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
