Deprecating counter legacy API and renaming new counter_set_alarm
to coutner_set_ch_alarm. Deprecating rtc API and modifying rtc
API to call new counter API (compatibility layer).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
counter.h and rtc.h API's share almost the same functionality.
They are unified as a new counter.h. rtc.h will be deprecated.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add driver support for kinetis ID device.
The length depends on the SoC.
`SIM_GetUniqueId` was not used because the struct would reorder
the ID and makes the driver more complicated because the length
of the struct depends on the SoC.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The test assumes that the last to IRQ numbers will be free, this isn't a
valid assumption and now that we detect multiple ISRs registering for
the some IRQ line, we see failures because of this assumption on some
platforms. Exclude those platforms from this test for the time being.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds device tree bindings and nodes for the rocktech lcd module used on
imx rt boards. The use of port, endpoint, and remote-endpoint properties
follow what is currently done in linux, but they are not yet used in
zephyr because some additional plumbing is needed in the
extract_dts_includes.py script.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds board configurations to support the mimxrt1050_evk and
mimxrt1060_evk boards in the lvgl sample.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes the lvgl sample to use the same display device name as the lvgl
library rather than a hardcoded string.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the mcux elcdif shim driver and clocks on imx rt socs when the
display driver interface is enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux elcdif driver to adapt it to the
zephyr display interface. Although the hardware and underlying mcux sdk
driver can support additional configurations, some shortcuts are
currently made in the shim that force a given pixel format, lcd data
bus width, and signal polarity. This works with the rocktech lcd module
used on imx rt boards, but will need to be updated for other display
panels.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new entry in the pixel format enum for RGB 565. This will be used
for the lcd display on the mimxrt1050_evk and mimxrt1060_evk boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds device tree bindings for the imx enhanced LCD interface (eLCDIF)
controller. The compatible is reused from linux.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The Adafruit SAMD51 boards use a combined BOSSA / U2F bootloader that
resides in the first 16 KiB. Add support for pulling the application
partition offset from the configuration and using that to offset where
the binary gets flashed.
Signed-off-by: Michael Hope <mlhx@google.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Always link firmware built for nrf9160_pca10090ns into the
code-partition defined in DT, regardless.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Introduce BOARD_NRF9160_PCA10090NS to differentiate between
secure and non-secure board variants.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
In case of !XIP, set defaults for CONFIG_FLASH_SIZE and
CONFIG_FLASH_BASE_ADDRESS in Kconfig.
Fixes: #13113
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
With this commit, it is now possible that if (for e.g.) lightness
transition is interrupted by temperature transition (which could
be instantaneous or non-instanstaneous) then as soon as temperature
transition get over, then algorithm would achieve target value
of lightness.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Add a sample demonstrating usage of the APA102 driver, heavily based
on led_ws2812. Tested on nucleo_l432kc with an Adafruit DotStar strip.
Signed-off-by: Marc Pignat <marc@absintheaudio.com>
There is a apa102 driver, and an upcomming patch will provide a sample
for using it, but let's keep the bitbang version which is intersting.
Signed-off-by: Marc Pignat <marc@absintheaudio.com>
The GPIO controller only supports edge triggering according to
the descriptions of the associated registers. So errors out
when level trigger is requested. Also adds the option to do
double edges triggering as the controller supports this.
Fixes#12763
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When optimizations are disabled more RAM is used and we get a stack
overflow on CONFIG_LOG_PROCESS_THREAD_STACK_SIZE. To rectify this,
increase the stack size when CONFIG_NO_OPTIMIZATIONS.
This does not scale well, and will have to be replaced by a a more
general solution eventually, but in the mean time it follows the
existing best practice established by the GCOV infrastructure in
commit e908ea9aa5
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When optimizations are disabled more RAM is used and we get a stack
overflow on BT_HCI_TX_STACK_SIZE. To rectify this, increase the stack
size when CONFIG_NO_OPTIMIZATIONS.
This does not scale well, and will have to be replaced by a a more
general solution eventually, but in the mean time it follows the
existing best practice established by the GCOV infrastructure in
commit e908ea9aa5
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Replace Cortex-M3 with Cortex-M architecture family
in the header documentation of kernel_arch_data.h and
kernel_arch_func.h, which are generic header files for
the entire familty of ARM Cortex-M CPUs. The commit
adds some more minor style fixes in functions'
documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit improves the documentation of internal ARM core
function _arch_irq_lock(..), adding a more detailed description
of its impact on the different Cortex-M processors.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When selecting BT we need to select BT_CTRL for most bluetooth
samples to work correctly.
Let's fix that in the board files.
Fixes the following error when CONFIG_BT is selected:
zephyr/drivers/bluetooth/hci/h4.c:463:30:
error: ‘CONFIG_BT_UART_ON_DEV_NAME’ undeclared (first use in
this function)
h4_dev = device_get_binding(CONFIG_BT_UART_ON_DEV_NAME);
^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Michael Scott <mike@foundries.io>
Configure the SiFive Freedom SoC to bind to the I2C Peripheral.
Note: The FE310-G000 used on the HiFive 1 does not posess the I2C
peripheral. However, the FE310 platform can have an I2C device memory
mapped in the location described in riscv32-fe310.dtsi.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Driver for the I2C peripheral in the SiFive Blocks RTL
Repository (https://github.com/sifive/sifive-blocks).
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Fix issue #9028: last bit of SPI/I2S transaction may be corrupted.
Impacted STM32 SOC series: F0/F1/F2/F3/F4/L0.
Notes:
- F2/F4/L0: set gpio to very_high speed ('11')
- F0/F3: set gpio to high speed ('11').
- F1: set gpio to 50MHz.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Set Kconfig symbol SETTINGS_FCB_FLASH_AREA based on the
DT_FLASH_AREA_<FOO>_ID define instead of being hard coded.
We replace 3 with DT_FLASH_AREA_IMAGE_SCRATCH_ID and
we replace 4 with DT_FLASH_AREA_STORAGE_ID.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
After addition of flash_map auto-generation it is needed to
use generated flas_area name instead of hard-code.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This Patch add functionality for automatic generation of the flash map
using DTS description. Automatic generation allows to replace
C-hardcoded flash_map.
We generate a set of defines based on the index of a partiion:
#define DT_FLASH_AREA_<IDX>_OFFSET 0
#define DT_FLASH_AREA_<IDX>_SIZE 131072
#define DT_FLASH_AREA_<IDX>_DEV "FLASH_CTRL"
#define DT_FLASH_AREA_<IDX>_LABEL MCUBOOT
Additionally we also define:
#define DT_FLASH_AREA_NUM 4
and:
#define DT_FLASH_AREA_<PARTNAME>_ID 0
Signed-off-by: Findlay Feng <i@fengch.me>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The test had hard coded address family with value 4. This test
was failing as we have now AF_CAN family with value 4. Use 99
as an invalid address family value instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible to set the filter in user application and that
information is passed to the CANBUS device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the value 0 is a valid network interface index, we cannot use
unsigned value for interface index as that would not allow to
distinguish an invalid value. So make interface index a signed
8-bit value which is ok as we do not expect to have more than 127
network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function did not take the address family into account
when printing protocol name. The protocol value depends on
address family.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows user to create a CAN socket and to read/write data
from it. From the user point of view, the BSD socket CAN support
works same way as in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds PF_CAN and AF_CAN protocol family identifiers
that are used by BSD socket CAN support code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Vipin Anand <vipin.anand@intel.com>
This command is useful for signing binaries for loading by a
bootloader. At present, only MCUboot's "imgtool" is supported, but it
would be straightforward to add support for additional tools.
Using this command instead of "plain" imgtool avoids looking up any
numbers for the flash write block size, text section offset, or slot
size to get a signed binary. All users need to specify is the location
of the signing key.
This greatly improves usability for those unfamiliar with MCUboot, or
even experienced users who have to deal with multiple flash partition
layouts, boards, etc.
The command works by inspecting state in the Zephyr build system, some
of which is also provided by the runner package.
Signed-off-by: Marti Bolivar <marti@foundries.io>
