The following symbols don't exist so remove them from prj_virtual.conf:
CONFIG_I2C_EEPROM_SLAVE_0_CONTROLLER_DEV_NAME
CONFIG_I2C_EEPROM_SLAVE_1_CONTROLLER_DEV_NAME
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Kconfig symbols for RX/TX LSB first didn't match between the driver
and the Kconfig file. Change driver to match Kconfig symbol names
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Websocket was removed in 1cba0161ed so
remove dead Kconfig references to CONFIG_WEBSOCKET_CONSOLE and
associated dead code/files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Zephyr's flash_map code is largely copied wholesale from MCUboot, but
the copyrights were done incorrectly when the copy/pasting happened.
The current copyright holders are listed as Nordic and Runtime. This
is the patch which removed it from MCUboot; there is no copyright
holder explicitly named:
b788c71c08 (diff-e4c0c184210793513328934f14840a4c)
In fact, I was the author of a nontrivial portion of it, introduced
here:
dc4c42bf62 (diff-e4c0c184210793513328934f14840a4c)
At the time, I was working for Linaro, so add their copyright to the
copy of this file introduced into Zephyr.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Add a space in some long doc titles to allow for wrapping in the title
display. Also fixed a table in the mec2016evb board doc.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In case log_panic is called from context which can be
interrupted, it is safer to set panic_mode flag after
logs are flushed. If flag was set before flushing and
log_panic was interrupted then another context was
attempting to process log message directly, competing
for log backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Prompt length is used when printing log messages to erase
prompt. If length is not updated and new prompt is longer
than default one then only part of the prompt is erased
which looks like data corruption.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
HAS_COVERAGE_SUPPORT can be set both on boards with enough RAM to
store the coverage results, or for POSIX ARCH based ones
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Using Zephyr SDK 0.10.0-rc2, GNUCC 8.2.0 is used and
(__packed uint32_t *) are now generating warnings..
Replace with CMSIS macros __UNALIGNED_UINT32_READ and
__UNALIGNED_UINT32_WRITE
ST internal reference: 61328
Fixes#13237
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Using Zephyr SDK 0.10.0-rc2, GNUCC 8.2.0 is used and
(__packed uint32_t *) are now generating warnings..
Replace with CMSIS macros __UNALIGNED_UINT32_READ and
__UNALIGNED_UINT32_WRITE
ST internal reference: 61327
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Using Zephyr SDK 0.10.0-rc2, GNUCC 8.2.0 is used and
(__packed uint32_t *) are now generating warnings..
Replace with CMSIS macros __UNALIGNED_UINT32_READ and
__UNALIGNED_UINT32_WRITE
ST internal reference: 61325
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Using Zephyr SDK 0.10.0-rc2, GNUCC 8.2.0 is used and
(__packed uint32_t *) are now generating warnings..
Replace with CMSIS macros __UNALIGNED_UINT32_READ and
__UNALIGNED_UINT32_WRITE
ST internal reference: 61324
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Using Zephyr SDK 0.10.0-rc2, GNUCC 8.2.0 is used and
(__packed uint32_t *) are now generating warnings..
Replace with CMSIS macros __UNALIGNED_UINT32_READ and
__UNALIGNED_UINT32_WRITE
ST internal reference: 61323
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The generated defines RTC_0_CLOCK_FREQUENCY and RTC_0_PRESCALER are
maked as deprecated by dts generation. This causes a build warning and
an error during sanitycheck runs. Replace with the DT_ prefixed
versions that are not deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 040d6b6e99 (eth: eth_mcux: Convert to use DT_ prefixed defines)
changed all the defines, but to incorrect ones.
This commit changes them to what actually gets generated.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Print just the basename of the Input and Output filenames
when creating the board specific image for Intel S1000 CRB
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Part of Power Management API was incorrecty documented under
"Power Management Hook Interface" section. This commit fixes
that problem by introducing "System Power Management APIs".
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit extends the power_mgr sample in order to demonstrate
power state forcing using the sys_pm_force_power_state() API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
At the moment application which chosen policy based power
management does not have an option to override decision
taken by the policy (it could only disable some power
states).
This commit adds the sys_pm_force_power_state() method,
which allow the application to choose power state used
when OS decide to suspend the SoC.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Since this is a test dedicated to Intel S1000 CRB,
use the I2C0 device name directly instead of a Device Tree or
Kconfig defined device name.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Update DMA tests according to dma_cavs implementation of
single block transfers. Multiple block transfers are achieved
by reloading DMA upon every DMA completion.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
If we include this header files in cpp source code,
the compiler say"error: template with C linkage".
Include <device.h> must be moved outside the 'extern "C"' section.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
We were select host compiler from the generic gcc compiler section which
is used for cross toolchains. This arch should use the host-gcc compiler
definition instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When NEWLIB_LIBC=y, building the hwinfo drivers fails with:
In file included from ZEPHYR_ROOT/drivers/hwinfo/hwinfo_weak_impl.c:7:0:
ZEPHYR_ROOT/include/hwinfo.h:43:1: error: unknown type name '__syscall';
did you mean '__fastcall'?
__syscall ssize_t hwinfo_get_device_id(u8_t *buffer, size_t length);
^~~~~~~~~
__fastcall
ZEPHYR_ROOT/include/hwinfo.h:43:19: error: expected '=', ',', ';', 'asm'
or '__attribute__' before 'hwinfo_get_device_id'
__syscall ssize_t hwinfo_get_device_id(u8_t *buffer, size_t length);
^~~~~~~~~~~~~~~~~~~~
ZEPHYR_ROOT/drivers/hwinfo/hwinfo_weak_impl.c:9:16: error: expected '=',
',', ';', 'asm' or '__attribute__' before '_impl_hwinfo_get_device_id'
ssize_t __weak _impl_hwinfo_get_device_id(u8_t *buffer, size_t length)
^~~~~~~~~~~~~~~~~~~~~~~~~~
ninja: build stopped: subcommand failed.
The <hwinfo.h> file uses __syscall and this symbols is defined by
<kernel.h>. This doesn't happen with the real drivers as they include
<device.h> and thus <kernel.h>.
Fix that by including <kernel.h> from <hwinfo.h>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The hwinfo shell uses shell functions and thus doesn't build when
CONFIG_SHELL=n. Fix that by adding a dependency on SHELL.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Be consistent in how board docs are named and move all to index.rst.
This will make the URL to the board documentation predictable and easier
to remember.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The phrase "Zephyr applications use the ..." in many boards and
inconsistently. This is just to say what is the board identify is.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When we change documentation or board images, do not build all tests for
this board. Only add more tests when actual code has changed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
