Refactor the imx rt code/data location config defaults such that we
default to on-chip memories at the soc level and override to external
memories at the board level. This means that we frequently override soc
defaults for evk boards, but it removes the assumption that all imx rt
boards (particularly non-evk boards) will have the same external
memories as evk boards.
The end result is that imx rt evk boards still have the same defaults as
before, but the way we get there is different.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Changed the order of Bluetooth callbacks. Now the connected callback is
received before CCC changed callbacks.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Use the state machine states to determine if the session has ended.
This way zperf will properly reply stat packet to remote client even if
duration of the session is non zero.
Also we don't need to update counter (received packet number) at end of
the session.
Note: if id < 0, it means session end, otherwise it's session ongoing.
(id is the first feild of application data from remote client).
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
In order to follow the BSD socket numbering of the network
interfaces, start numbering from 1. The index 0 is reserved
to mean any interface in BSD socket code.
Fixes#13084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net-app based echo-server/client applications were used for
various smoke testing purposes. As those two apps are now removed
we need to introduce the same support into sockets based echo-client
and echo-server applications.
Fixes#13300#13481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable pull-up on UART RX pin to reduce power consumption.
If the board is powered by battery and the debugger is
not connected via USB to the host, the SoC consumes up
to 2mA more than expected.
The consumption increases because RX pin is floating
(High-Impedance state of pin B from Dual-Supply Bus Transceiver).
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
We have been overriding OVERLAY_CONFIG coming from tests. Concat all
files and create one variable that we pass to kconfig as list.
Fixes#13320
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated I2S sample app for Intel S1000 CRB to loopback
the audio from host in addition to playing audio out to codec
When AUDIO_PLAY_FROM_HOST=Y, audio from host is both looped back
and played out to codec
When AUDIO_PLAY_FROM_HOST=N, audio from host is looped back and
app generated ones are played out to codec.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Introduce toolchain_cc_optimize_for_* family of macros.
Each macro represents a general optimization class.
Each macro is then responsible for setting an output variable to that
class-of-optimization's flag.
The names of these output variables are decided from the root
CMakeLists.txt.
No functional change expected.
Clang's optimization flags are compatible with gcc, and are thus
inherited.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Found by "disordered --shuffle-dirents=yes".
Sorting os.walk() in scripts/subfolder_list.py removes the randomness in
the following files:
build/zephyr/misc/generated/syscalls_subdirs.txt
build/zephyr/CMakeFiles/syscall_list_h_target.dir/ or build.ninja
Sorting os.walk() in scripts/parse_syscalls.py removes the randomness
in:
build/zephyr/misc/generated/syscalls.json
build/zephyr/include/generated/syscall_dispatch.c
build/zephyr/include/generated/syscall_list.h
Note my (limited so far) testing did *not* observe any randomness in any
object file that this would address; the main purpose here is to remove
a very large amount of noise in diffoscope.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Since malloc takes a size_t, we should use 0x7fffffff as the max size
(ie what the larget unsigned int) would normall be. Newer newlib's have
a check that will fail building since 0xf0000000 exceeds the size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The imx rt dts fixup was missing gpio 2,3,4 instances. This caused a
build error in the gpio driver when an application enabled:
CONFIG_GPIO_MCUX_IGPIO_2=y
CONFIG_GPIO_MCUX_IGPIO_3=y
CONFIG_GPIO_MCUX_IGPIO_4=y
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In certain configurations, such as with MPU support enabled, the
consumption of the advertising thread has gone slightly up. In some
case it was seen to overflow by some 48 bytes. Let it always be 786,
like it was so far with CONFIG_BT_HOST_CRYPTO.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This app was supposed to have userspace disabled, but it kept on being
forced on by CONFIG_TEST_USERSPACE (which in turn gets enabled by
CONFIG_TEST).
Also lower the shell stack size since stack analysis shows over 700
bytes being unused.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The doxygen documents must be placed before the symbol in order
them to be shown in the generated documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that network related functions are always documented.
This means keeping the prototype and possible stub together.
Fixes#12615
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit c9ace83c89 which
bypasses setting cache attributes.
The previous cache attributes actually set the text/data/etc.
sections to be inaccessible. So fix it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix some usability issues with this command.
- add help making it clear that either imgtool must be installed, or
the path to imgtool.py must be provided using --tool-path.
- in case people don't read that, print a helpful message if imgtool
is not installed and --tool-path is not provided.
- in case the build directory is not properly set up for an MCUboot
chain-loaded image, make the BuildConfiguration inspection more
robust, printing out errors using check_force() when values are
missing.
- mark the --tool option required to print usage and avoid a
RuntimeError if it is not provided.
- make sure we search for the default build directory before checking
for its existence, in case it was not provided
Signed-off-by: Marti Bolivar <marti@foundries.io>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the nrf options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the mcux options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Cleanup the Kconfig code for the flash driver. Platform-specific
options should be in their own Kconfig files to be consistent and to
not pollute the common configuration.
To this end we move the nios2 options into it's own file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Change connection parameters and channel map after connection is
established. Test encrypted connection also with split stack. Tighten
pass/fail criteria.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
A trivial bug that caused the following error when this situation
actually happened:
Too many thread objects (21)
Traceback (most recent call last):
File "/zephyr/scripts/gen_kobject_list.py", line 307, in <module>
main()
File "/zephyr/scripts/gen_kobject_list.py", line 281, in main
-(-thread_counter // 8))
TypeError: write() takes exactly one argument (2 given)
With this commit, the detected error is printed correctly, e.g:
Too many thread objects (21)
Increase CONFIG_MAX_THREAD_BYTES to 3
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
* Slight tweaks to memq comments,
* Document most of mfifo through commentary.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
* Clarify certain functions and data structures in upper link layer.
* Disambiguate node rx event done, add commentary.
MFIFO_DEQUEUE macro does string concatenation.
Thus MFIFO_DEQUEUE(done) does not refer to done (the stack local), but
mfifo_done.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
ull_ref_inc already existed, but not ull_ref_dec.
No functional change expected.
Consistency is preferred due to code navigation.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
