Patch (3206568e43) changed network
interface numbering starts from 1. The index 0 is reserved.
So use api to get default interface index for packet socket sample.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If one invokes cmake with west in the PATH but not inside a west
installation (i.e. in a monorepo setup), west will try to list the
zephyr modules issuing an error message.
Test if west list succeeds before using result for module testing.
Fixes#14177
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Parse the west version output and make sure both bootstrapper and
installation wests are up to date. This will still work after the two
are combined into what gets installed via PyPI.
Fixes: #13209
Signed-off-by: Marti Bolivar <marti@foundries.io>
Speculative execution side channel attacks can read the
entire FPU/SIMD register state on affected Intel Core
processors, see CVE-2018-3665.
We now have two options for managing floating point
context between threads on x86: CONFIG_EAGER_FP_SHARING
and CONFIG_LAZY_FP_SHARING.
The mitigation is to unconditionally save/restore these
registers on context switch, instead of the lazy sharing
algorithm used by CONFIG_LAZY_FP_SHARING.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commits adds an overlay file with the SOCKS5 symbol that is needed
to run MQTT with a proxy, and extends README with instructions on how to
use it with the default and custom settings.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The change in commit e5349d74ab
results in only one resource being returned for a device with
pci_bus_scan(). The root cause for that issue was actually
because of wrapping around when scanning through BARs, where
BARs were scanned 0->1->2->..->6->0->1->.. in an endless loop
for a single bus:dev.function. So revert that commit and put
in a fix by moving on to the next function after going
through all the BARs.
Fixes#1550
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some people never use the menuconfig, but it makes a good sanity check
when making Kconfig changes, so encourage it for that. Mention a few
things that can be checked in it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a section on how 'if' works to the 'Kconfig - Tips and Best
Practices' page, especially when combined with 'source'.
There seems to have been some confusion here that lead to a bunch of
duplicated dependencies. It's probably simpler than most people assume.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we enable newlib we run into an issue with fcntl.h and the openamp
proxy support. We don't utilize the proxy support so just disable it by
default.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull in libmetal SHA 59a10acbb0bb684c1a75488f11878cb984170c81 to get
some build fixes related to newlib.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have SDK 0.10.0 we can enable building this board with the
Zephyr toolchain. SDK 0.10.0 introduced support for the ARM v8m based
cores which these boards utilize.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename scheduler spinlock sched_lock to sched_spinlock as it will
collide with the cleanup of the reserved function name _sched_lock(),
which will also be called sched_lock().
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Prevent speculative attacks with out-of-bounds fd
values.
Won't affect code generation for systems that don't
enable CONFIG_BOUNDS_CHECK_BYPASS_MITIGATION.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We add two points where we add lfences to disable
speculation:
* In the memory buffer validation code, which takes memory
addresses and sizes from userspace and determins whether
this memory is actually accessible.
* In the system call landing site, after the system call ID
has been validated but before it is used.
Kconfigs have been added to enable these checks if the CPU
is not known to be immune on X86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Used to sanitize array indexes without using any branch
instructions. Should be portable to any architecture.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We introduce hidden Kconfigs for all speculative
side channel attacks that we plan to address in the
kernel and update the existing ones to indicate their
CVEs.
This list keeps growing, so introduce a new config
CONFIG_X86_NO_SPECULATIVE_VULNERABILITIES, for CPUs
which don't speculatively execute, or are otherwise
immune by design.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Following new shield introduction in #14057, it has been highlighted
there was no codeowner for boards/shields/.
Assign erwango as codeowner.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Changed the print format for unsigned 32-bit variables that produced
warnings when compiled with newlib instead of the standard C library.
Chose to replace %d with PRIu32 because the latter is more portable
and adapts to the types of the standard C libraries.
Tested with and without newlib, and with sanitycheck.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
Fixes the warning -Wunused-parameter that is added with -Wextra
in the GCC compiler.
Chose to void the unused parameter inside the function.
Testcompiled with -Wall -Wextra -Werror and builds cleanly.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
We previously added a cmake hack to alias rt1052 A0 part numbers (A
suffix) to A1 part numbers (B suffix), but this hack did not work
correctly when a board uses A1 part numbers directly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Use proper link to Zephyr source files. Fix rendering of special
options like NET_OK, NET_DROP and NET_CONTINUE.
Add reference links to network technologies documents.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use LL drivers instead of HAL driver because LL driver is available
for all soc while HAL driver is not.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
There is no need to sort the kernel objects by name in the linker
script. This is just a simple clean-up.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Commit 45a7e5d076 removed scripts/sysgen
and _k_task_list/_k_event_list sections are no longer being used.
So remove them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Commit 73cb9586ce renamed linker
section from _k_memory_pool to _k_mem_pool, but the references
in linker scripts are still there. So remove them now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a note in the documentatation of _setup_new_thread()
function stating that the caller is responsible for
providing a size argument that corresponds to the availabe
thread stack area.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The commit adds an __ASSERT statement when configuring
the ARMv8-M build-in stack guard for supervisor thread
stack overflow protection, to catch the case when the
stack_info.start does not point to the beginning of the
thread stack allocated area, pointed by stack_obj.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit does the following:
- moves the reservation of the area for local thread data
inside the arch-specific _new_thread() function,
- aligns the end of the thread's stack with the granularity
of the MPU, already at thread's initialization, moving it
out of userspace_enter() function. In this way, the local
thread data are stored inside the thread stack area that
is, later, assigned unprivileged RW permissions (if thread
enters user mode).
- passes the right thread stack size information to function
_new_thread_init(), which stores it into stack_info.start.
As a result, the whole usable User Thread stack area (i.e.
excluding a possible guard area) falls inside the region
programmed as unprivileged RW, during context-switch.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit forces architecture-specific implementation for
initializing the are for user mode local thread data. This
has been enforced already for ARC. We now do the same for ARM.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit corrects and improves the documentation for the
convenience macro _ARCH_THREAD_STACK_SIZEOF(sym). It stresses
that the returned size is guaranteed to match the amount of
stack that is available for the thread, that is, excluding any
areas not directly usable, e.g. a Stack Guard.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch introduce logging to settings.
Error in stored data record might occurred in runtime, so
better to switch assertion to error logging.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
If the rc = -EAGAIN from mqtt_read_publich_payload(), it shouldn't be
used in memcpy() since it is a negative value, and instead, it should
try to read again.
Fix: #13825
Coverity-CID: 191002
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
The Kconfig.defconfig.efr32* files added redundant dependencies on
SOC_EFM32* that are already added in the Kconfig.defconfig.series files
that source them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Ram back-end was unnecessary included in non qemu test which
increased RAM footprint much.
Patch includes ram backend into build only for qemu_x86 build.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
