No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix missing BT_CTLR_FILTER conditional compilations that
cause compile errors when device whitelisting feature is
disabled in builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move GNU ld linker specific flags related to orphan handling into
toolchain_ld_baremetal().
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move --gc-sections flag to toolchain_ld_base()
Move --build-id=none flag to toolchain_ld_base()
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Depending on configuration, this value could end up as
a variable and not an array symbol, causing a crash if
newlib decides to call _sbrk on behalf of a user thread,
which needs to perform arithmetic on it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Depending on optimization level, the TC_RESULT_STR[]
array could actually be placed in memory instead of
being expanded at compile time, resulting in memory
access errors from user mode.
Just replace TC_RESULT_TO_STR() with an inline function
containing a switch statement instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The various struct pipe_sequence were not located in memory
accessible to user mode. With optimization turned on, they
weren't in memory at all, but with code coverage enabled
the arrays were actually being read, resulting in memory
access failures from user mode.
Fix them by placing in ROM, they never get modified.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Renamed function vendor_cmd_handle to vendor_cmd_handle_common for
shared vendor commands. This allows vendor to implement
vendor_cmd_handle, containing both common and specific handling.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The pkt variable cannot be NULL at this point so the check for
nullness is not needed.
Coverity-CID: 198002
Fixes#15777
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
* Rename the stack local 'done' to 'evdone' so as to disambiguate from
MFIFO_DEQUEUE_PEEK(done) which is actually 'mfifo_done'.
* add comment on ull_slave_done
* add comments to addr_us_get
* add comments to HCI_CLASS
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
settings_read_cb is defined to return ssize_t and not size_t. This
also eliminates several Coverity warnings.
Fixes#15765Fixes#15768Fixes#15771Fixes#15774Fixes#15778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reintroduces support for static service in the form of a new API,
BT_GATT_SERVICE_DEFINE, and changes the internal services (GAP/GATT)
to be defined as const as they are never register/unregistered.
Internal service needed to be renamed in order to keep the same order
as before since the section elements are sorted by name.
The result is the following (make ram_report):
before:
gatt.c 572 0.66%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gap_attrs 180 0.21%
gap_svc 12 0.01%
gatt_attrs 160 0.18%
gatt_sc 80 0.09%
gatt_svc 12 0.01%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
after:
gatt.c 210 0.24%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gatt_sc 80 0.09%
last_static_handle 2 0.00%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 96Boards Argonkey mezzanine board has been officially
published on ST website:
https://www.st.com/en/evaluation-tools/steval-mki187v1.html
Update documentation with official picture and website info.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Introduce new API function for ieee802154 driver configuration.
Currently this function is used for ACK configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
STACK_POINTER_RANDOM depends on a random generator, this can be either a
non-random generator (used for testing purpose) or a real random
generator. Make this dependency explicitly in Kconfig to avoid linking
problems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The PR removes the exclusive limit on enabling both UART_ASYNC_API
and UART_INTERRUPT_DRIVEN so that both options can be enabled
together for same uart driver.
Also, the interrupt handler will be used for both cases. So, enable
definition of interrupt handler for both.
However, nRF UART driver still wants to enable only one of them.
So, a new config is added to disable the code for UART_ASYNC_API
when the option UART_INTERRUPT_DRIVEN is enabled.
Signed-off-by: Jun Li <jun.r.li@intel.com>
Modern versions of GDB support multiple architectures
with the same binary.
In fact, Ubuntu stopped shipping a gdb-arm-none-eabi
package, gdb-multiarch should be used instead.
This fixes a failure on those systems where otherwise CMAKE_GDB will be
assigned to CMAKE_GDB-NOTFOUND.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
k_poll_signal_raise() returns an error code to indicate that the raise
was too late to notify an expiring poll. Make clear that this does not
mean that the signal was lost: a subsequent poll will find it and expire
immediately.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
device_get_binding() compares pointers first before doing strcmp().
However, enabling coverage forces -O0 to disable any compiler
optimizations. There would be multiple copies of the same string,
and the code pathing doing pointer comparsion would not be tested
at all. So add this flag to merge string constants such that
the pointer comparison would be exercised.
This also adds a bad driver which fails initialization. This is
to make sure that execution path is covered.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Extended the maximum possible number of sections that track statistics
for each flash page.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the UTIL_DEC_N definitions to handle the UTIL_REPEAT macro with
up to 256 repetitions.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Changed type of the paramater that determines the number of elements in
the stats group. Now it is possible to declared more than 256 elements.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
IRQ_CONNECT and irq_enable calls in the SiFive UART driver were
misconfigured when the conversion to DeviceTree support occurred.
See also: https://github.com/zephyrproject-rtos/zephyr/pull/10613
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
The mimxrt1015_evk board image was corrupted and did not display
properly in the board documentation. Fix it.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix the nRF52840 Coded PHY radio timings based on testing
with conformance tester.
Fixes the following conformance tests:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI Change]
LL/CON/MAS/BV-54-C [Slave Receiving Data, LE Coded, CI Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression in Coded PHY CI change implementation
introduced by reverting the commit 9d1ca9c390 ("Bluetooth:
controller: remove redundant PPI channel and TIMER CC").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This adds support for the async API for SAM0 SERCOM SPI using
DMA to drive the device. This implementation does the reload
for both transmit and receive in the receive DMA handler.
Doing this simplifies the implementation but means that the
transmit drains completely, resulting in the SPI clock pausing
between buffers while both are reloaded in the receive handler.
Tested with tests/drivers/spi/spi_loopback and several simple
programs monitored with a logic analyzer.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
This was tested with the hello world application. UART 0 was used
as console for displaying "Hello World! mec15xxevb_assy6853" to
the serial terminal.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
soc : arm : microchip_mec Use rename fault clear function
The Cortex-M core function to clear faults was rename by
upstream. Update to use new name.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Initial support for Microchip MEC1501 series is added to the tree.
Additional support for UART is also included. This SoC supports
two operational modes for interrupts (Direct and Aggregated). For
this commit, the direct capable interrupt are configured in direct
mode.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Initial support for Microchip MEC1501 series is added to the tree.
Additional support for UART is also included. This SoC supports
two operational modes for interrupts (Direct and Aggregated). For
this commit, the direct capable interrupts are configured in
direct mode.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
As the getaddrinfo() test is suppose to be self contained, then
we will need to install handler for the sent DNS query. After we
receive the query in process_dns() thread, we verify that the
query was sent properly. We do not return DNS reply back to
the caller in this case as we do not want to create DNS server
just for this simple test application. This can be changed later
if we get DNS server functionality in Zephyr network stack.
Fixes#15193
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the loopback driver is enabled, then the packet might come
from localhost in which case mark it properly. Without this marking
the packet from/to 127.0.0.1 or ::1 would be dropped in later checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding possibility to modify shell prompt in Kconfig and in prj.config
file.
Fixes#14547.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When importing a pre compiled imported library it is currently
required to perform three steps.
This commit introduces a helper function which allows the
user to import a library with a single function call.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
