Shell history module reworked to use ring buffer for storing
commands. Dedicated buffer is used to story all command lineary.
History capacity is in bytes not in number of entries, e.g.
many short commands can be stored or few long (depending on
CONFIG_SHELL_HISTORY_BUFFER).
Removed implicit command null termination from shell_history and
added it to shell after fetching command line from the history.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extend ring_buffer with following functions:
- getting capacity of the ring buffer (which is smaller than
buffer size)
- resetting ring buffer to initial state
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This stores a combination of a pointer and a CPU number in the low
2 bits. On 64-bit systems, the pointer part won't fit in an int.
Let's use uintptr_t for this purpose.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support of Seeed 2.8" TFT Touch Shield v2.0 to ILI9340 driver.
This driver supports color pixel formats of RGB888 and RGB565.
Signed-off-by: Bernard Lee <bernard.lee@nordicsemi.no>
soc_register.h is available in most of stm32 series.
It is sometime empty or contains includes to flash_registers.h,
which is included directly with direct reference in flash driver.
soc_register.h is also included in stm32 clock drivers, but this
driver do not use direct reference to any register anymore.
Clean up these files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Corrected buffer pointer in LVGL zephyr_vdb_write function for
converting RGBA8888 to RGB888 pixel format.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Cleanup logging and fix style. Use hex format specifier
for endpoint address. Remove periods from log messages.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The directory tree description was missing a code-block shorthand so the
following lines weren't formatted correctly.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
MCUboot needs nearly all 8 pages, on some commits even more. This leads
to a overwrite of parts of mcuboot code when an application is flashed.
By improving the size of the boot partition to 10 pages (from 8) and
decrease both application slots by 1 page, MCUboot fits in the boot
loader partition. This is also fixable by an extra .dts, but having an
out of the box working configuration is preferable.
Signed-off-by: Stefan Kraus <stefan.kraus@fau.de>
ESP32 can sport up to 4 network interfaces: two 802.11 (station and
ap), ethernet, and bluetooth. All of them derive from the same RDATA
register in efuse block 0. However, in most cases, the last (sixth)
octet will change like so:
- 802.11 station: mac[5] += 0
- 802.11 ap: mac[5] += 1
- bluetooth: mac[5] += 2
- ethernet: mac[5] += 3
Read "Number of universally admnistered MAC address" section in esp-idf
documentation[1] for more information.
[1] https://docs.espressif.com/projects/esp-idf/en/latest/
Signed-off-by: Leandro Pereira <leandro@hardinfo.org>
Enclose the align argument in parents to make sure the cast applies to
the whole expression when expanded. This is especially important if the
argument contains a ternary operator.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Memory boundaries are declared as extern char arrays which can be used
directly rather than casting their addresses. The cast to u32_t also
breaks 64-bit builds.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There is no reason for storing a pointer into an atomic_t variable here.
Not only because this requires a dubious double cast that breaks on
64-bit builds as atomic_t is a 32-bit type, but also because the comment
in the code already admits that the whole operation isn't atomic anyway
and that it is fine. So let's keep things simple.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
prj_tickless.conf lacks the CONFIG_PM_CONTROL_OS=y option which
results in the sample failing to build with this config as it leaves
sys_pm_ctrl_disable_state() and sys_pm_ctrl_enable_state()
undefined.
Add the relevant options from prj.conf to fix the build.
Tested on nrf52840_pca10056.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
- Erase operations must be aligned to the erase-size.
- Don't need to perform an alignment check on a full erase. The offset
is not used in this case.
- Don't need to perform alignment check on a sector sized erase, as
this alignment is checked on entrance to the function.
- Removed some whitespace.
Signed-off-by: Ryan C Johnson <ryan.johnson@flex.com>
Fix a bug in the latency_measure sample where, when the board was
specified through the environment, the wrong prj.conf file was
selected.
This change is not a pure refactoring, as it is believed that there
have been some copy-paste mistakes where prj_small_freq_divider.conf
and prj.conf have become out-of-sync over time. These assumed mistakes
are not carried over in the new organization.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove commented-out code in the latency_measure sample. Commented out
code should not be committed to version control.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
tests/drivers/i2c/i2c_api wants to have CONFIG_I2C_0_NAME defined.
Add it to dts_fixup.h as was done for Watchdog and & timer.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Add Kconfig options:
- ARM_FIRMWARE_USES_SECURE_ENTRY_FUNCS
- ARM_ENTRY_VENEERS_LIB_NAME
Use these to link the veneers lib into the Non-Secure Firmware when
needed.
Also, make the path passed to the linker absolute to make it work with
makefiles.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Add ifdefs to handle the nrf91 case. This change will dynamically
place and size the NSC region according to nrf91 HW limitations.
Add Cmake check of NSC offset if manually set.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Now length of the UDP header is checked, and obviously these test were
avoiding setting it properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Length should be at least of UDP header size but not bigger than actual
payload size.
Reported-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to commit a211afb0 ("logging: Add option to detect missed
transient string duplication"), the logs for LwM2M subsystem
is now spamming missing log_strdup() calls.
Let's add log_strdup() where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
The various ptp_clock_driver_api methods receive a struct ptp_context
not a struct eth_context, and the later must be obtained from a
reference stored in the former. Failing to do so by directly
interpreting driver_data as a struct eth_context instance does end up
corrupting memory past the actual struct ptp_context storage. The test
may still pass as ptp_clock_get() reads from the same out-of-bounds
memory as the previous ptp_clock_set() and therefore the content
matches, and with luck the corrupted memory is not essential to the
completion of the test. But that wasn't my case which allowed me to
find this issue.
Fix this by properly obtaining a reference to the struct eth_context
instance via the actual struct ptp_context, and adding a test like
the one found in eth_tx() to make sure we got the right memory.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Documentation update to add instructions to download a
zephyr binary to the target from a Linux host
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Python scripts to download a zephyr binary image (zephyr.bin) to
Intel S1000 from a linux host.
The linux host's SPI master and GPIOs shall be connected to the
corresponding SPI slave and I/Os respectively.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A YAML file to specify configuration of interface I/Os
such as the SPI device, GPIOs, etc.
The image download script configures the host's SPI and GPIO
interfaces accordingly.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
The values were swapped meaning the configured value for rxcnt was used
for txcnt and vice versa.
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Match the restriction on title length with checkpatch, since we document
that we follow the Linux style and checkpatch was there before gitlint.
Fixes#14652
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
