Updated the documentation of display_blanking_on and
display_blanking_off to clarify its usage.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
I'm guessing STM32 GPIO nodes don't generate interrupts, because I can't
find any device tree nodes with 'compatible = "st,stm32-gpio"' and an
'interrupts' property.
Remove the required 'interrupts' property from the binding. This fixes a
bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
spi-max-frequency is marked as required in
dts/bindings/mtd/jedec,spi-nor.yaml.
I took the value from the datasheets (133 MHz for all), and guessed that
a dummy entry is fine for QEMU.
Fixes some errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The port_sel property had the category set to 'define' which isn't a
valid option. Change it to be 'required'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit makes the clock property optional (through base.yaml),
as clock reference is not used in the code.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This changes RPA timeout so that the address is changed every 60
seconds. This change is needed to speed up privacy related test cases.
Currently, the new RPA was initiated on request that was a bit hackish
and could be done via BT_RPA_TIMEOUT Kconfig option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit make the float_disable test suite more robust
for fast CPUs, by replacing k_sleep(1) with k_yield(), as
the mechanism to trigger thread swap-out during the test
execution. In the wake of using k_yield(), the test, now,
fixes the priorities of all testing threads to 0, making
the test behavior more deterministic with respect to
thread scheduling. The patch doesn't change the functional
behavior of the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix a race which seems to have been presenting itself
very sporadically on loaded systems.
The race seems to have caused tests/kernel/sched/schedule_api
to fail at random on native_posix.
The case is a bit convoluted:
When the kernel calls z_new_thread(), the POSIX arch saves
the new thread entry call in that new Zephyr thread stack
together with a bit of extra info for the POSIX arch.
And spawns a new pthread (posix_thread_starter()) which
will eventually (after the Zephyr kernel swapped to it),
call that entry function.
(Note that in principle a thread spawned by pthreads may
be arbitrarily delayed)
The POSIX arch does not try to synchronize to that new
pthread (because why should it) until the first time the
Zephyr kernel tries to swap to that thread.
But, the kernel may never try to swap to it.
And therefore that thread's posix_thread_starter() may never
have got to run before the thread was aborted, and its
Zephyr stack reused for something else by the Zephyr app.
As posix_thread_starter() was relaying on looking into that
thread stack, it may now be looking into another thread stack
or anything else.
So, this commit fixes it by having posix_thread_starter()
get the input it always needs not from the Zephyr stack,
but from its own pthread_create() parameter pointing to a
structure kept by the POSIX arch.
Note that if the thread was aborted before reaching that point
posix_thread_starter() will NOT call the Zephyr thread entry
function, but just cleanup.
With this change all "asynchronous" parts of the POSIX arch
should relay only on the POSIX arch own structures.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This updates tester application to recent changes in BTP related
to Connection Parameters Update.
Connected event has been extended with connection parameters.
Connection Parameters Update command and event have beend added to
initiate and track current connection parameters.
Needed to automate qualification test GAP/CONN/CPUP/BV-06-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Activate the DTCM for STM32F7 board that have Ethernet.
This is needed because the Ethernet driver puts the DMA buffer
to this section.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
For STM32F7 MCU the actual implementation doesn't work when the
DMA buffers are placed in the SRAM.
This might be a problem with caches.
To overcome this problem, the buffer is moved to the DTCM.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds a DTCM (Device Tightly Coupled Memory) section for
Cortex F7 MCUs. The Address and length is defined in the corresponding
device tree file.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Simple backends, like UART or RTT, implementation is very similar.
Header has functions which can be reused by simple backends and
remove redundant code.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add some diagrams showing the different scheduling algorithms we
support.
The diagrams were made using draw.io and can be edit using draw.io.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When code relocation enabled, there will be serval regions holding
text. And then there will be function call between these .text
regions, when distance between caller and callee is too far, linker
will automatically generate and insert veneer functions. And these
veneer functions will be located right after the last instruction
in the .text region by the linker. So these code will be put in the
memory reserved for priv_stacks text and kobject text if they don't
consume all the reserved memory. Or the veneer functions will be put
before the reserved memory if there isn't code in the reserved
memory. And then in the user mode building process, there will be
different memory layout and it will cause usr mode not working.
And moving the memory reserved for priv_stacks text and kobject text
at the beginning of .text will avoid above problem. The detailed
analysis for this issue can be found on Github issue #17038.
Fixes: #17038.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Since the nxp,imx-gpio binding is shared between i.MX and i.MX-RT SoC
the 'rdc' property needs to be optional (as it doesn't make sense on the
RT SoCs).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to make sure that the build works in folders that require a UTF
encoding, make sure that both CMake and the various Python scripts that
interact with each other on files use the same encoding, in this case
UTF-8.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
main.c file changes
1. Renamed <board.h> to <device.h>
2. <misc/printk.h> now is inserted into <sys/printk.h>
3. <i2c.h> and <gpio.h> now are inserted into
<drivers/i2c.h> and <drivers/gpio.h>
4. Deleted <errno.h> because it is not using
5. Deleted <pwm.h> because it is not using
6. Deleted <display/mb_display.h> because it is not using
in that project (legacy from old project).
7. Now we use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS} ,
so renamed SW0_GPIO_CONTROLLER to DT_ALIAS_SW0_GPIOS_CONTROLLER
prj.conf file changes
1. Deleted CONFIG_SYS_CLOCK_TICKS_PER_SEC=250
because apps shouldn't set tick rate.
Made a line follower robot sample using DFRobot Maqueen chassis
for micro:bit board. Deleted unused files.
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
This enables support for GAP writable device name in tester application
for testing purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fix the conditional compile of Data Length Update event
generation on PHY Update Procedure when Data Length
Extensions are not supported.
The regression was introduced in
commit 70a89876d0 ("Bluetooth: controller: Fix missing
data length update event")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Because NXP MPU's regions are dynamically enabled/disabled, ENET
device's access maybe restricted when switching out of a task.
Background DMA transfers from RAM to MAC/PHY may happen during MPU
region reconfiguration or core idling.
Enabled ENET (Kinetis MPU Master 3) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
There doesn't seem to be any use of the virtualcom device in the code,
so lets remove it from the dts as it describes itself as a usb device
controller which it is not.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We've removed the need for the 'generation:' property in the binding
files. Remove use in st,stm32-usb.yaml.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of dts bindings mark 'interrupts' as a required property when
in fact they are not for those devices. Remove the 'required' setting
and just have 'interrupts' as 'optional'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The dts that have intel,qmsi-watchdog don't sent a clock property so its
not required. Change it from being required to optional.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This macro provides the required alignment directives to ensure that the
font definitions are placed properly for iteration as members of an
array object.
Closes#17581
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Sample applications for display functions do not work on native_posix_64
due to missing overrides. Clone the native_posix_64 Kconfig override
for all samples that have a native_posix Kconfig override.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Flash size calculation was don with assumption that flash page size
is always 1 KB and flash size was parameterized with such granularity.
This patch correct this bug.
Flash pages number under statistic can't be calculated via preprocessor
anymore - thus are parameterized via Kconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It Need to start using DT_FLASH_SIM_xxx labels after sim_flash was
un-chosen as zephyr,flash.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Qemu_x86 didn't reflect emulated program memory size.
It was because chosen zephyr,flash was assigned to flash_simulator
which was helping to generate DT_FLASH properties for sim_flash node.
This change revert choice of flash0 which solve problem with
program memory size. Flash simulator have to use
DT_SOC_NV_FLASH_xxx labels for fetch its property since that.
fixes#15832
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The desired memory map is to have the 0 - 4K page non-present
to catch NULL pointer dereferences,
from 4K - 4MB for the program text (RO, Execute),
ROM (RO, No Execute), and 4MB-8MB for system RAM.
This patch cut text size by 4 KB which allow to meet above
requirements.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
