This forms the foundation for the abstraction of the binary tools,
where the following steps are taken:
- Move binary tool resolving, such as objcopy, objdump, readelf and
so forth, out of compiler definitions and place in a dedicated binary
tools folder with the binary tools supplier as subfolder, similar to
the compiler and linker directories.
- Create binary tool sets, gnu, host-gnu and llvm.
- Each toolchain selects the required set of binary tools by setting
BINTOOLS via its generic.cmake as it also does for compiler and linker.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
struct tm has fields that were not being set by the implementation,
causing the test to fail when the uninitialized values were compared
with a static initialized result. Zero the structure before filling it.
Closes#17794
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
It looks like, at some point in the past, initializing thread stacks
was the responsibility of the arch layer. After that was centralized,
we forgot to remove the related conditional header inclusion. Fixed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We generated a define for each instance to convey its existance of the
form:
#define DT_<COMPAT>_<INSTANCE> 1
However we renamed all other instance defines to be of the form
DT_INST_<INSTANCE>_<FOO>. To make things consistent we now generate a
define of the form:
#define DT_INST_<INSTANCE>_<COMPAT> 1
We also now deprecate the DT_<COMPAT>_<INSTANCE> form and fixup all uses
to use the new form.
Fixes: #17650
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Explain what it means to enable nodes (and for a node to be disabled)
with some sample code from the .dts(i) files
- Explain the '&foo { ... }' syntax
- Linkify files with :zephyr_path:
- Simplify and shorten wording a bit
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* use IRQ_ACT to check nest interrupt
* implement an asm macro for nest interrupt check
* no need to use exc_nest_count, remove it
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* do not use a specific variable (saved_r0/saved_sp) to free r0
/exchange sp, but use stack to do that.
* it will make code scalable, e.g. for SMP, no need to define
variables for each core
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* as ilink has a copy in ERET, it can be reused as a gp
* use ilink to do the job of arc_exc_saved_sp to save 4 bytes
and save some cycles because no load/store of memory
* it will make code scalable, e.g. for SMP, no need to
define variables for each core
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit is a hotfix. It makes sanitycheck happy by fixing
the way we can temporarily exclude some tests in the userspace
test suite for the ARC architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add some information that would've saved me a lot of time:
- Give an overview of how device tree nodes and bindings fit together,
with examples. Assume people might be coming at it without knowing
anything about device tree.
- Explain how 'inherits' works in more detail
- Explain what 'parent/child: bus: ...' does more concretely, and what
problem it solves
- Add more examples to show what things look like in the .dts file
- Clean up the language a bit and make things more consistent
Also fix some errors, like 'properties: compatible: ...' being wrong
(missing 'constraint:' and compatible strings in the wrong place).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix the pipeline prepare or resume dequeue loop from
overflow. Fixes premature exit of dequeue of done FIFO
which caused the pipeline to overflow due to previously
placed done is not dequeued correctly and next event not
being put back into the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds civetweb as a west module and a sample that uses it.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Because NXP MPU's regions are dynamically enabled/disabled, USB
device's access maybe restricted when switching out of a task.
Background DMA transfers to/from RAM may happen during MPU region
reconfiguration or core idling.
Enabled USB (Kinetis MPU Master 4) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Currently the retransmit_work is not cancelled when closing a context,
making it operate on an invalid context.
LwM2M RD client also closes the context and initializes it again when
registration with the server fails, overwriting the active timeout and
breaking the timeout dlist.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
This toolchain is no londer supported or needed. It was used to build
configurations that are now being removed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new DTS/binding parser to scripts/dts/ for generating
generated_dts_board.conf and generated_dts_board_unfixed.h.
The old code is kept to generate some deprecated defines, using the
--deprecated-only flag. It will be removed later.
The new parser is implemented in three files in scripts/dts/:
dtlib.py:
A low-level .dts parsing library. This is similar to devicetree.py in
the old code, but is a general robust DTS parser that doesn't rely on
preprocessing.
edtlib.py (e for extended):
A library built on top of dtlib.py that brings together data from DTS
files and bindings and creates Device instances with all the data for
a device.
gen_defines.py:
A script that uses edtlib.py to generate generated_dts_board.conf and
generated_dts_board_unfixed.h. Corresponds to extract_dts_includes.py
and the files in extract/ in the old code.
testdtlib.py:
Test suite for dtlib.py. Can be run directly as a script.
testedtlib.py (uses test.dts and test-bindings/):
Test suite for edtlib.py. Can be run directly as a script.
The test suites will be run automatically in CI.
The new code turns some things that were warnings (or not checked) in
the old code into errors, like missing properties that are specified
with 'category: required' in the binding for the node.
The code includes lots of documentation and tries to give helpful error
messages instead of Python errors.
Co-authored-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
--deprecate-only sounded like a command to "only deprecate (something)"
to me at first. --deprecated-only might make it clearer that it's about
only generating deprecated stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
User mode is only allowed to induce oopses and stack check
failures via software-triggered system fatal exceptions. This
commit forces a kernel oops if any other fatal exception reason
is enforced.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
User mode should be able to successfully induce a kernel
oops, or stack check fail fatal error. The latter is
required by compiler stack canaries.
User mode should not be able to induce a kernel panic, or
fake some other kind of exception.
Currently supported on ARM and x86 platforms.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The macro, toolchain_cc_produce_debug_info, adds the compiler specific
flag for enabling the production of debugging information in the
toolchain native format.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Up to now, the only SOC that was supported in the STM32L496 series was
STM32L496XG with flash of 1MB. With the recent support of STM32L496XE,
this implementation is not correct. This patch adds support for the
other SOCs that come with flashes of 512KB and 256KB.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Make use of the new flag introduced in nrfx v1.7.2 that suspends
transfers, in order to properly handle scattered I2C transactions,
especially to perform i2c_burst_write() in the way expected by
display drivers, i.e. as a continuous transaction on the bus,
without the repeated START between its two parts.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This introduces a new flag (BT_GATT_SUBSCRIBE_WRITE_PENDING) which is
set when a write operation requires canceling before the parameters can
be reused.
Fixes#17534
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a dummy cancel request which is used instead of NULL when
clearing and outstanding request thus prevent new request to take
place before a response is received while allowing the original request
to be reused.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mcumgr is missing dependency on net_buf, which is used for SMP protocol
implementation. This causes build failure in case when only SMP over
shell is selected (CONFIG_MCUMGR_SMP_SHELL=y).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
flash_img subsystem writes data to flash only when the amount of data to
be written is larger than available buffer space. This commit modifies
this behavior to write data to flash as soon as the buffer is full.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
base64_decode requires 'size_t *olen', but '*int' was passed
instead. This caused a -Wincompatible-pointer-types "note: expected
'size_t *' {aka 'long unsigned int *'} but argument is of type 'int *'"
warning in qemu_x86 build. Fix that by using correct variable type.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This commit enables the CAN shell for the sample code.
Also, the device shell is activated to find the proper device-name.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Implement a CAN shell. With this shell you can send messages,
attach and tetach filters.
Messages that match the attached filters are printed to the shell.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
As we now have PPP support, use more generic "serial-net" string instead
of "slip" when setting what kind of networking the board supports.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must discard the received Discard-Request silently.
See RFC 1661 chapter 5.9 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
