If we receive a multicast IPv4 or IPv6 packet, then we need to
deliver it to all sockets that have installed a handler for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, they were tested only with CONFIG_NET_SOCKETS_POSIX_NAMES,
but should also work with POSIX subsys. Achieve this by including POSIX
headers in this case.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
* Exlude _m4target from net tests as they assume SERIAL is enabled,
which is not the case (yet).
Fixes: #19065
* Zephyr drivers headers were moved from include/ to include/drivers.
Update pinmux.h path to the new location.
* Add missing status line on joystick_left dts node.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix nucleo_f411re default configuration by deactivating I2C support.
Additionally fix wrong comment and end of file.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
iwdg_stm32_install_timeout expects a timeout passed in
milli seconds. As the timeout is defined in micro
seconds in Kconfig.stm32, we need to divide by
USEC_PER_MSEC when CONFIG_IWDG_START_AT_BOOT is
activated because iwdg_stm32_install_timeout makes
the multiplication by USEC_PER_MSEC.
Fixes#18695
Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
Up to now interrupts could be only configured once, with no way to
disable them in runtime.
Allow interrupts to be disabled in runtime and then properly reenabled
on user request. This allows to ignore interrupts when software is not
expecting them.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The LIS2MDL is not a combo device, but pure magnotemeter.
Hence, '-magn' extension is not adding information and can
be removed from dts compatible name as well as binding filename.
Instead specify '-i2c' or '-spi' to distinguish between the names.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
* Add support to search for a board specific shield in
<SHIELD DIR>/boards/<SHIELD>/<BOARD>.{overlay,conf}. So we can
support something like:
x_nucleo_iks01a3/boards/x_nucleo_iks01a3_shub/stm32mp157c_dk2.overlay
x_nucleo_iks01a3/boards/x_nucleo_iks01a3_shub/stm32mp157c_dk2.conf
Fixes#19078
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Fix dir name when shield name doesn't match the dir name. So for
shield 'x_nucleo_iks01a3_shub' we will look in now for
x_nucleo_iks01a3/boards/<BOARD>.{overlay,conf} instead of
x_nucleo_iks01a3_shub/boards/<BOARD>.{overlay,conf}
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move handling for shield boards/board.overlay, shield.conf and
boards/board.conf inside the SHIELD_LIST check.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fatal error reporting now only dumps to the log mechanism,
so enable it in immediate mode for all tests to ensure
that fatal errors are visible and no messages are lost.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These two tests were right at the knife edge of 16kb
on riscv64, and were not building with logging enabled
on that platform.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test for some reason wants to validate that
k_stack_analyze() works when called from the idle thread,
but with a default idle stack size of 256 this just results
in crashes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These functions get called from various places and
we were observing linker errors. Always build the stubs
when userspace is disabled, gc-sections will discard them
if unused anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If proto field in socket() call is set to 0, then we should have
a sane default for it that depends on the type of the socket.
Fixes#18873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPPROTO_RAW is used as a default for SOCK_RAW when protocol
is not set in socket() call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't want to point anything outside of the Zephyr GitHub
organization. Let's point at the recently created zephyr fork instead.
Details on how this will be managed going forward, according to
standard project policy:
https://docs.zephyrproject.org/latest/guides/modules.html
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The semi-automated API changes weren't checkpatch aware. Fix up
whitespace warnings that snuck into the previous patches. Really this
should be squashed, but that's somewhat difficult given the structure
of the series.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These calls are not accessible in CI test, nor do they get built on
common platforms (in at least one case I found a typo which proved the
code was truly unused). These changes are blind, so live in a
separate commit. But the nature of the port is mechanical, all other
syscalls in the system work fine, and any errors should be easily
corrected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These calls are buildable on common sanitycheck platforms, but are not
invoked at runtime in any tests accessible to CI. The changes are
mostly mechanical, so the risk is low, but this commit is separated
from the main API change to allow for more careful review.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
After the window watchdog introduction, the boards that support it over
independent watchdog fail to pass this test. This patch adds specific
tests for the nucleo_{f401re, l496zg} boards supporting WWDG.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
Also modified to timeout to 1000ms in order to support watchdogs like
WWDG with smaller timeouts.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
From the Jailhouse days, this has been a function call. That's silly.
We now inline the EOI in the ISR when in x2APIC mode. Also clean up
z_irq_controller_eoi(), so it now uses the inline macros.
Also, we now enable x2APIC on up_squared by default.
Fixes: #17133
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The .init_array vector is, in fact, read-only data, so put it there.
Previously it was placed at the end of the ROM, but was unknown to
the x86 memory protection code with XIP enabled (because it was not
part of the text, rodata, or kernel RAM). Until recently, the XIP
implementation artificially bloated _image_rodata_size to cover the
entire ROM, so the (mis)placement of .init_array went unnoticed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
