With the previous changes, usb_set_config() is no longer called by
default at boot time, causing the test to fail.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This is no longer necessary, as this option is selected as a dependency
for class implementations where it is required.
Also remove redundant test cases.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Until now the whole USB device stack code is located
in the top subsys/usb directory. Move it to own directory
in preparation for upcoming extension and rework of USB support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Replace deprecated macro USBD_CFG_DATA_DEFINE by
USBD_DEFINE_CFG_DATA which places usb_cfg_data structures
in specific iterable section.
Replace __usb_data_start, __usb_data_end usage patterns
size_t size = (__usb_data_end - __usb_data_start);
for (size_t i = 0; i < size; i++) {...}
by
STRUCT_SECTION_FOREACH(usb_cfg_data, ...) {...}
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the current USB device support, the sizes of bulk endpoint
are mostly configure through Kconfig and do not care if a device
is high-speed capable. The information if a USB device controller
supports high-speed comes from devicetree. Add a Kconfig option to
map this information and configure bulk endpoint sizes
accordingly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This reverts commit 755cc644cc.
This approach is problematic in several ways. First, `intptr_t` could
cause undefined behavior in the subtraction when the pointer converts to
a negative value. Except in weird cases where the sign of the pointer
identifies a memory domain (like kernel vs userspace) I'm unaware of any
valid use of `intptr_t`.
Second, this macro was created to address a special need that cannot
rely on defined behavior: i.e. to ensure that data definitions are
placed in contiguous space and access is provided through linker-defined
symbols, for which the language required alignment and continuity is not
guaranteed.
A macro that calculates the span between linker symbols has very
different semantics than one that calculates the difference between
pointers. Replace the global PTR_DIFF with a documented local macro
that tests what's necessary without risking integer overflow.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Let's use the PTR_DIFF() helper which performs pointer difference in a
64-bit compatible way, and use %zu for printing sizeof() results.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Refactor device api test using standard placement for descriptor table
and configuration data.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add verification that interface number and endpoint addresses are
correctly allocated.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After including native_posix USB controller we can perform some simple
tests on native_posix.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
USB relies on descriptors and configuration data allocations in
specific sections. This simple test verifies that at least size of the
data is correct.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>