Since the peer isn't replying on SYN resend, update the
test to check for failed connect.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Since the connect is now blocking, update the timeout values
for the tests to pass.
In case of resend test, set the timeout to 1000ms to account
for the retransmission.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This is a test, and the function is called with K_FOREVER, so it's not
supposed to fail.
Fixes: #25735
CID: 210582
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This tests make sure that the right source address is chosen during
the mesh multicasting.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This socket is shared by all the test cases which run in
different threads. Just make it a global object here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
A quick test on a dummy device that:
- opens a socket (success)
- sends data (success)
- suspends (success)
- suspends (failure)
- sends data (failure)
- resumes (success)
- resumes (failure)
- sends data (success)
This permits to show that PM states are properly handled in network
stack.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For success cases, the net_pkt is handled by the IP stack
so no need to free the net_pkt. The double free is not causing
any issues as the net_pkt code will just ignore the request but
we should avoid doing it because of error prints that are printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Kernel objects were being directly accessed without previously
calling k_thread_access_grant().
This change allows each test that requires an asynchronous
event to send it to a common work queue with correct
permissions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Tests should always start with test_, otherwise detection of subtests
will not work through sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use DT_INST_SPI_DEV_HAS_CS_GPIOS() in drivers to determine if we should
utilize CS_GPIO base SPI chipselect handling. This allows us to remove
Kconfig option for this feature.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit removes the redundant `LOG` and `LOG_IMMEDIATE` selections
in `prj.conf`, since the `TEST_LOGGING_DEFAULTS`, which is enabled by
default for all tests, selects `LOG` and `LOG_MINIMAL`.
This effectively allows the test to run with the default test logging
policy, set by the testing subsystem.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit renames all local definitions with the name `PORT` in the
net tests, in order to prevent name conflict with certain HALs
(notably, Atmel SAM E5x HAL).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
No point to change the throw_sleep to k_timeout_t because we
are calculating the timeout beforehand which can lead to
unexpected results if using k_timeout_t.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to know which test fails to semaphore timeout so
add line number of the failing test to assert print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_context API will change, the s32_t timeout parameter
will be changed to k_timeout_t. All the Zephyr users of this API will
be changed in subsequent commits. This is internal Zephyr API only,
so the API is not deprecated etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use the appropriate K_SECONDS() or K_MSEC() macros to pass a timeout to
k_sleep() and other kernel APIs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Earlier tests were not going through ICMP echo
core stack handlers. Due to that unable to verify
echo reply. Tests are improved to verify replies.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using MQTT_UTF8_LITERAL() allows to reduce code and make it less error
prone, since utf8 length is calculated automatically by the macro.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add a simple test to verify that the bind() can be called multiple
times if AF_PACKET is set and there are multiple network interfaces
in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test case for IPv4 header options was added but
CONFIG_NET_IPV4_HDR_OPTIONS option was not enabled.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Wrong option length in IPv4 header options testcase
added. This should cover malformed packet case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Added simple test case for net_pkt_clone() to verify
cursor position after cloning.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Switch to `NET_SOCKET_REGISTER` mechanism over the offloaded API
registration.
Including the following fixes from the review:
* The fd returned by the socket accept call needs to be finalized,
similar to how it is done for socket creation.
* sl_RecvFrom() in TI SimpleLink Host driver does not support NULL
pointers for 'from' address and address length, and sl_SendTo() does
not ignore the destination address when in connection mode, so passing
NULL would cause a failure. These issues have been reported to TI
(CC3X20SDK-1970, CC3X20SDK-1971).
Let's use sl_Recv and sl_Send to implement recvfrom/sendto in the case
of NULL addresses.
* simplelink_poll() should not process negative file descriptors in the
fds array after sl_Selecti() returns. A negative fd value indicates
that the entry is invalid and should be ignored.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It's no longer needed to call `mqtt_input` after `mqtt_disconnect`.
Doing this will actually return an error as the MQTT connection is no
longer active after calling `mqtt_disconnect`.
Fixes#22360
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The reworked 6lowpan implementation asserts when no LL source or
destination address is set on a packet. This caused the fragmentation
tests to fail before they completed.
Fix the issue, by setting a dummy address on a packet during a setup.
Fixes#19761
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
NET_INIT_PRIO (defined in subsys/net/ip/Kconfig) is currently hardcoded
to 90 (it's not set via any Kconfig.defconfig files either). Maybe it
could be given a prompt or be removed, but just remove the assignment
for now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
The prompt was removed in commit 2ec7e70509 ("net: routing: Hide routing
option temporarily").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by IEEE802154_RAW_MODE, defined in
drivers/ieee802154/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is enabled through being selected by IEEE802154_CC1200 and
IEEE802154_RF2XX.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is already enabled indirectly through being selected by
NET_L2_IEEE802154_RFD, which is enabled in the configuration file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
(There doesn't seem to be any way to enable this symbol, because it's
not being select'ed either.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix ASSERTs that appears when enabling asserts in net buf.
Asserts are:
- Pulling from net buf before any data has been added.
- Pulling more data than has been allocated for the buf.
Fix warning:
W: You have 1 IPv4 net_if addresses but 2 network interfaces
W: Consider increasing CONFIG_NET_IF_MAX_IPV4_COUNT value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix byteorder test writing past the data pointer. This would otherwise
have been caught by the assert, but net buf asserts were not enabled in
the test. Reset the buffer between different tests to re-use the same
16-byte buffer.
Turning on asserts gives:
starting test - net_buf_test_byte_order
ASSERTION FAIL [net_buf_simple_tailroom(buf) >= len] @
ZEPHYR_BASE/subsys/net/buf.c:775
E: r0/a1: 0x00000004 r1/a2: 0x00000307 r2/a3: 0x00000000
E: r3/a4: 0x00006d79 r12/ip: 0x00000000 r14/lr: 0x000028ad
E: xpsr: 0x61000000
E: Faulting instruction address (r15/pc): 0x000050b0
E: >>> ZEPHYR FATAL ERROR 4: Kernel panic on CPU 0
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix ASSERTs that appears when enabling asserts in net buf when adding
more data than has been allocated for the buf.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Also remove the assignments to the other NET_GPTP_CLOCK_ACCURACY_*
symbols. They are all in the same choice (in
subsys/net/l2/ethernet/gptp/Kconfig), meaning only one of them can be
enabled, and the choice already defaults to
NET_GPTP_CLOCK_ACCURACY_UNKNOWN, which is the symbol assigned last.
The symbol assigned last becomes the choice selection when multiple
symbols in a choice are assigned to. The other choice symbols still
become n. Dependencies override assignments.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The code tried to use the allocated pkt ptr before checking for
NULL value.
Fixes#21699
Coverity-CID: 206608
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test name did not reflect the purpose of the test.
Also add "poll" tag so that we can more easily launch just
this test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This adds tests for reading and writing 16, 24, 32, 48 and 64 bits in
different byte orders.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix unintended sign extension (SIGN_EXTENSION).
The result of "coap_block_size_to_bytes() * (iter - 1)"
extending the sign type.
Issue is the conversion of iter from u8_t to int because it's
an unsigned operand in an binary subtraction with 1 which is
a signed operand with higher conversion rank (int).
Fixes#20880Fixes#20881Fixes#20882Fixes#20883
Coverity CID :205780
Coverity CID :205786
Coverity CID :205806
Coverity CID :205808
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If the ICMPv6 test is run in real hw, we need a bit more buffers
to pass the test.
Fixes#19915
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Stack size might be too small when running the test in real
board like sam-e70.
Fixes#19914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After run Sanitycheck script I found out that
some test cases have a same test case name
in the test result .xml file.
For boards mimxrt1050_evk, qemu_x86, sam_e70_xplained
in .xml files that cases were dublicated.
Problem happened only with cases net.dns.no_ipv6.init
and net.dns.init. Only that cases were dublicated.
To solve it, I decided to change test cases names for the dns tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This symbol is not user-configurable (has no prompt), so assignments in
prj.conf have no effect on it.
(It has no defaults either, and isn't selected/implied, so nothing in
vanilla Zephyr will ever enable it.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The default main stack is too small for some boards so increasing
it to 2048. The issue was seen with sam_e70_xplained.
Fixes#19762
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The test creates two network interfaces, but does not set MAC
address of one of them correctly (MAC address is all zeros).
This is not good and the issue fixed in commit 9468cb6eb1
could have been revealed earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replaced net_bytes_from_str in hostname_get test by a new function that
converts the unique part of the hostname in a byte array.
net_bytes_from_str can not be used as it assumes that the string input
is of the format "xx:xx:xx:xx:xx:xx" where as the unique part of the
hostname is a MAC address string without colons. If net_bytes_from_str
is used this could result in buffer overrun on the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
This is bad practice and may conceal issues on platforms
not in the whitelist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure net-shell is started properly and it does not crash.
The purpose of this test is to catch issues described in #19178
where UART was not working which was seen as net-shell crashing
at startup.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that resolving IPv4 address but returning IPv6 address
(and vice versa) is failing and we catch that scenario.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Got several sanity failures with this information
Assertion failed at tests/net/socket/poll/src/main.c:76: \
test_poll: (tstamp >= 30U && tstamp <= 30 + FUZZ is false)
In one of the failed tests, the tstamp was 50. Dunno what is
wrong here but in order to proceed with this, increasing the
timeout temporarily. This commit can be removed if the root
cause for this timeout is figured out.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Moving Kconfig options from testcase.yaml file to prj.conf so
that we can run the test app easily from command line and without
sanitycheck.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This was only used on the Quark SoCs. It is no longer used, can no
longer be tested, and it's reliant upon the deprecated legacy PCI
subsystem. Remove it to prevent bitrot.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We need to increase the stack size of the main thread, to
avoid stack overflow, when executing the tests on various
platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A second semaphore is used for the second trickle timer, so that if the
first timer expires twice before the second one, the test would still
wait before proceeding to check on cb_2_called.
Fixes#18598.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
CONFIG_MAIN_STACK_SIZE was originally 1344 in this test. The following
commit removed setting the stack size in the test:
commit 7b3cd7d371
Author: Cami Carballo <cami.carballo@intel.com>
Date: Fri Jul 26 10:59:16 2019 -0400
tests: net: increase stack size
However getting the default stack size on FRDM-K64F of 512 causes the
following panic:
FATAL: ***** BUS FAULT *****
FATAL: Stacking error
FATAL: Imprecise data bus error
FATAL: NXP MPU error, port 3
FATAL: Mode: Supervisor, Data Address: 0x20002ff0
FATAL: Type: Write, Master: 0, Regions: 0x8200
FATAL: r0/a1: 0x00000000 r1/a2: 0x00000000 r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x00000000 r14/lr: 0x00000000
FATAL: xpsr: 0x200002f4
FATAL: Faulting instruction address (r15/pc): 0x00000000
FATAL: >>> ZEPHYR FATAL ERROR 2: Stack overflow
FATAL: Current thread: 0x2000182c (main)
FATAL: Halting system
Bump stack back to original 1344 fixes the issue.
Fixes#18292
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We are trying to pass 64-bit value to the driver, but we only
allocate space for an integer. This will not work and will cause
invalid memory access.
Fixes#18205
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add new tests that make sure that sendmsg() works when using
connected UDP socket and when not setting msghdr destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
An issue was seen after changes introduced in #17933.
The net_context callback was run after we checked that it
was run ok. This test failed of course in that case. Simple
solution is to k_yield() which will make sure that the
callback gets called before we continue. This works for this
test as our threads have suitably selected priorities.
There is also no need to use K_NO_WAIT here so replacing the
timeout with K_FOREVER.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The testcases are adapted to handle more than one net buffer in
a net_pkt. After the IPHC optimization it is possible that IP header
is not in the same buffer than the UDP header.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Make sure that SO_TXTIME socket option can be set and get.
Verify also that TX time is passed properly to network device
driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Noticed this error print when running in mps2_an385 platform.
<err> net_if: There is no network interface to work with!
Adding CONFIG_NET_LOOPBACK=y removes this error. After this
the CONFIG_NET_IPV6_MLD=n needed to be added in order to avoid
crashes when IPv6 MLD is done which is not needed for this test.
Removed also the whitelisting as that is not really needed and
we want to run these in as many platforms as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to increase the stack sizes if user enables CONFIG_COVERAGE
option. You can test this by this command
sanitycheck --coverage -p qemu_x86 -T tests/net/udp \
-T tests/net/mgmt -T tests/net/mld
This is partial fix for issues described in #17323
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the socket descriptor is invalid (fd < 0), there is no
need to try to close it.
Coverity-CID: 198949
Fixes#16785
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
... because this test does use userspace, as seen in the source or
demonstrated by the failure of this command:
sanitycheck --extra-args=CONFIG_TEST_USERSPACE=n
See commit message of 4afcc0f8af for the long story.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Check return value of net_if_ipv6_get_ll() before accessing it.
Coverity-CID: 199437
Fixes#17201
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test AF_NET_MGMT API getsockopt() and setsockopt() functions that
they work properly when called from kernel or from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add unit tests to net_addr_ntop() and net_addr_pton() in order to
verify that the functions can be called from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The info parameter is difficult to use if the caller does not
get information how long the info struct is. So add info_length
parameter to net_mgmt_event_wait_on_iface() and
net_mgmt_event_wait() APIs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_gw_by_index()
and set the gateway if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_netmask_by_index()
and set the netmask if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mutex.h to sys/mutex.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is useful that the ptp_clock_get() function can be called from
the userspace. Create also unit test for calling that function
from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_eth_get_ptp_clock_by_index() clock API to work with user space.
Create also unit test for testing this user mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user supplies AF_UNSPEC, we need to do two queries, one for
IPv4 A record and one for IPv6 AAAA record.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some MPU systems require region power-of-two alignment
and can't automatically use remaining RAM for the newlib
heap. Set it for this case. Fixes this test on mps2_an385.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The file descriptor was not closed after the test which caused
Coverity to complain about resource leak.
Coverity-CID: 198640
Fixes#16493
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Now length of the UDP header is checked, and obviously these test were
avoiding setting it properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The various ptp_clock_driver_api methods receive a struct ptp_context
not a struct eth_context, and the later must be obtained from a
reference stored in the former. Failing to do so by directly
interpreting driver_data as a struct eth_context instance does end up
corrupting memory past the actual struct ptp_context storage. The test
may still pass as ptp_clock_get() reads from the same out-of-bounds
memory as the previous ptp_clock_set() and therefore the content
matches, and with luck the corrupted memory is not essential to the
completion of the test. But that wasn't my case which allowed me to
find this issue.
Fix this by properly obtaining a reference to the struct eth_context
instance via the actual struct ptp_context, and adding a test like
the one found in eth_tx() to make sure we got the right memory.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Inside function test_net_pkt_basics_of_rw result of function call
net_pkt_read_be16 is not checked which might result performance
of the program and cause errors.
Coverity-CID 198003
Fixes#15776
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Fixes the compile errors in various platforms like:
* sam_e70_xplained (too few network buffers)
* galileo, cc3220sf_launchxl and mps2_an385 (missing random number
generator configuration options)
Fixes#15878
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_if_ipv6_calc_reachable_time() requires sys_rand32_get().
Enable the test random number generator so the build doesn't
fail.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As the getaddrinfo() test is suppose to be self contained, then
we will need to install handler for the sent DNS query. After we
receive the query in process_dns() thread, we verify that the
query was sent properly. We do not return DNS reply back to
the caller in this case as we do not want to create DNS server
just for this simple test application. This can be changed later
if we get DNS server functionality in Zephyr network stack.
Fixes#15193
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ipv6_fragment tests registered log module but still use DBG
macro of printk. Replaced them with NET_DBG.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add more Kconfig options to prj.conf file. In the future we need
to compile also in other hw than qemu_x86 in which case we need to
create separate test cases for those configurations.
Fixes#15282
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Write the net_pkt using net_pkt_write() and then verify that the
data is actually written into net_buf.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test is designed to run in user mode, but was disabled
for some reason.
Re-enable, and add mps2_an385 to the whitelist as this is
the QEMU target that emulates an MPU.
Fixes: #15228
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various globals for the test cases have been moved to
the ztest memory domain data section via ZTEST_DMEM tags
so that user mode can access them.
Some anonymous arrays whose address was being placed in
the msg_subackX structs have been split out so they
are in ztest memory domain.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test case added for IPv6 neighbors. This will add more than
CONFIG_NET_IPV6_MAX_NEIGHBORS neighbors. Network stack should
remove oldest neighbor which is in STALE state and it should
add new neighbor. So call to net_ipv6_nbr_add() should succeed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch checks the return value after updating the packet.
Fix Bugs: #14821
Coverity CID: 196635
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove magic numbers from Ethernet drivers and tests by defining
NET_ETH_MAX_DATAGRAM_SIZE and NET_ETH_MAX_FRAME_SIZE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't depend on CONFIG_NET_SOCKETS_POSIX_NAMES being defined (e.g.,
it's going to conflict with POSIX API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195844
Fixes#14405
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195880
Coverity-CID: 195816
Fixes#14413Fixes#14395
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195835
Fixes#14409
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
If the rc = -EAGAIN from mqtt_read_publich_payload(), it shouldn't be
used in memcpy() since it is a negative value, and instead, it should
try to read again.
Fix: #13825
Coverity-CID: 191002
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Use the new net_pkt allocator. Fix a small leak in the test as well.
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The very first test was basically testing the checksum calculation. And
that's already tested in more relevant tests. It was also trying in a
cumbersome way to generate packets scattered over many net_buf. But
that's also already tested in various other tests, and it's not at all
part of core utils anyway.
In any case, that all redundant, so let's remove it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Use the new net_context option to enable timestamping of outgoing
packet (NET_CONTEXT_TIMESTAMP).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just a quick rm/mv. The new API is going to be the only one, so legacy
test can disappear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/0/K_NO_WAIT for all timeouts
And fix tcp context connect call (it's not net_context_listen obviously,
and one parameter was missing).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If peer socket closed, the other side should get 0 from recv(), and
should get in stable manner (no matter how much time went from the
closure and/or how many times recv() is called).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_pkt_alloc_with_buffer() takes IP header and protocol header
length while calculating total length internally. Need not
specify explicitly. Also mutex was not properly initialized.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
- differentiating actual "fragment" to buffer element from a net_pkt
- instead of copying data (and thus allocating buffer) let's just take
the fragment buffer and put it into result packet.
- fixing compilation issue in relevant test
It's more efficient that way, as we use already allocated fragment
buffer instead of reallocating/deallocating after each fragment
reception.
A possible optimization would be to calculate the actual size + header
difference if only the actual size is close to the target size.
It would avoid to get a dry run of the header decompression for each
fragment received. The difficulty being in finding the sweet spot when
it is relevant to calculate the header difference.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Now that the stack uses the new API from net_pkt for pulling, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for copying, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now useless and can be replaced by net_udp_get_hdr() directly, in
the 2 unit tests it was used.
Removing as well the dbg function too_short_msg()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the new API for these 2 functions. Note that in some places,
using these functions is under-optimized (like in llmnr-responder in
dns: it gets the ip/udp headers already from the recv callback. That
will need to be taken care of later).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_pkt_tcp_data was only used in tcp unit test and could be replaced by
local net_tcp_get_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function is only used in sockets, thus making it a private function
of socket library and renaming it relevantly.
Note that sockets should be reviewed at some point to avoid using such
function: zsock_received_cb() already get the ip header and the protocol
header, so it could grab the src addr/port from there. It would be way
more optimized to do so, since net_pkt_get_src_addr is costly as it
parses all over again the ip/protocol headers.
utils unit test is updated and the test of the former
net_pkt_get_src_addr/net_pkt_get_dst_addr are removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The DAD was failing because we received the DAD network packet
even when should not had received it. Fix it by discarding all
the ICMPv6 NS packets that we receive.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The packet can be referenced somewhere else and letting the newly added
L2 header will generate corrupt packet. If the same packet is being
resent, ethernet will add again its L2 header. Thus the need to remove
such L2 header every time a packet has been sent, successfully or not.
Fixes#12560
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixed typo: CONFIG_NET_NET_PKT_LOG_LEVEL_DBG, removed extra _NET.
Removed debug macro CONFIG_NET_DEBUG_NET_PKT that is not used.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The test had hard coded address family with value 4. This test
was failing as we have now AF_CAN family with value 4. Use 99
as an invalid address family value instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we are adding more protocol families and protocol types
to connection handlers, some values might be same across
different types. Current connection handler only stores
proto type to match the handler, which is not enough if
we add more types. Also combination of family and types
may vary too. So adding family to connection handler to
figure out best match.
Also changing proto variable in net_conn from u8_t to u16_t.
net_context has 16 bit proto.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As the legacy library has been removed, we no longer need to
differentiate betwen MQTT implementations. Therefore align the library
folder name with other libraries and remove the `_sock` suffix.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As written originally, the tests assumed that if k_uptime_get_32()
returns times in milliseconds, that it also has millisecond
resolution. That however doesn't have to be the case, and indeed,
default timer interrupt period used by Zephyr is 10ms, and so system
time is incremented in such units. So, instead of "<= 1" tests to
account for timing increment, use "<= FUZZ".
For blocking tests, increase the timeout from previously used 10ms,
so we can reliably tests delays under the conditions described.
Also, enable CONFIG_QEMU_TICKLESS_WORKAROUND. Most other
timing-related tests have this enabled, and it may affect
stability of QEMU testing too.
Fixes: #12994
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In case of Ethernet, if the requested size is larger than MTU and if
AF_UNSPEC is provided, the allocator will need to take into account
the ethernet header size which is not accounted in the MTU.
Other current L2 do not follow that rule as their MTU is based on IP
one (IPv6 most of the time). What they declare as MTU is the full frame
size they handle (minus the FCS for instance in 15.4). So with
AF_UNSPEC, such assumption on L2 header size is unrelevant.
(On 15.4 the header size is variable anyway and cannot be known until
the frame is parsed).
Fixes#12982
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though these are currently used by the core only, it will be then used
by net_context as well. This one of the steps to get rid of net_pkt's
appdata/appdatalen attributes.
Also normalizing all ip/proto parameters name to ip_hdr and proto_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This goes through basic allocation, atomic read/write, data
getter/setter and cloning/copying.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The test counts the '\0' of the data copied, though it does not belong
to the packet.
Since the test by-passes net_ipv6_input, which would update the packet
length according to what is in the IPv6 header, the checksum calculation
fails.
Before, checksum calculation used to grab the length from IPv6 header,
but that changed to use net_pkt_get_len(): that one must provide the
real lenth.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only next to be removed functions like net_tcp_set_checksum() are left
untouched. All the rest is switched.
Adding net_tcp_finalize() to follow the same logic as for UDP and else.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This proovse to drastically reduce runtime overhead as it does not need
to parse IP nor TCP header all over again in a lot of places.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As these were parsed already by IPv4/6 input functions let's use them.
Applying the change on trivial UDP usage. TCP usage will have its own
commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This optimizes the memory quite a bit since we do not need to clone nor
split the original packet at any time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of the code had to be reworked due to the new API: it's more
logical to do everything sequentially (first headers, then MLD part)
than the contrary with inserting headers at the end.
Using get_data/set_data as well it makes the code clearer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
This part was heavier to change as it was not accessing the headers
directly but instead was read parts by parts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In nbr part, this is a useful information. Since net_icmpv6_input has
already parsed the icmpv6 header, let's get pass it, instead of
retrieving/parsing it again in various handler functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV6_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new net_pkt API to proceed through IPv6 header and all the
extension header as well.
Use udp/tcp input functions relevantly, and call net_conn_input
afterwards.
Note: This commit temporarly disable IPv6 fragmentation support
in the code directly. Which support will be re-enabled afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
checksum_offload is now the only one using that function, let's get rid
of such usage.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The disabled test causes crash in qemu_x86, so temporarily disable
it until a proper fix is found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit makes the necessary changes to allow the following tests
to run on cc3220sf_launchxl:
- mqtt_packet
- mqtt_publisher
- mqtt_subscriber
- mqtt_pubsub
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
There was a false timeout error because we did not check the
return value correctly. This issue is seen now because code
flow in core IP stack is happening in different order than
before.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is the macro name that matters, not its value. Here, that will help
to save 1 bit in struct net_pkt later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The previous commit replaced the net_pkt element ref with an element
atomic_ref. CI tests turned up more places where ref was used directly.
This commit converts them to use the new element.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Basic test for poll() behavior. UDP sockets are used for simplicity
so far (poll-related paths for UDP and TCP are similar, though later
adding TCP explicitly for full coverage may be useful).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that we should have many, many tests. The only reasonable
way to achieve that is by making tests easy and pleasant to write,
and that requires common, easy to reuse infrastructure.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Consistently use prepare_sock helpers.
2. Test not just client->server sending, but sending reply.
3. Send large packets (>1 net_buf fragment), not just small.
4. Check POSIX behavior on recv()ing datagram incompletely (the rest
should be discarded and next recv() should read next datagram.
5. More cleanroom testing, e.g. explicitly reinitialize input params
on each call (without assumptions that they're left with suitable
values from previous calls), clear input buffers before each read
operations, etc.
6. Reformat code. Previously it was very sparse, giving long test
functions, and thus impression that tests are complicated and hard
to write.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Now it does not mangle with any ll reserver space, let's rename it to
net_pkt_lladdr_clear instead.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fragmentation has nothing to do with 6lo. Up to the bearer to do so.
This change is required for futur serialization of 15.4 fragmentation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Valgrind reported this:
==14823== Invalid read of size 4
==14823== at 0x113FB9: memcpy (string_fortified.h:34)
==14823== by 0x113FB9: ethernet_fill_header (ethernet.c:483)
==14823== by 0x113FB9: ethernet_send (ethernet.c:588)
==14823== by 0x116720: net_if_tx (net_if.c:173)
==14823== by 0x116720: process_tx_packet (net_if.c:211)
==14823== by 0x10FDB6: z_work_q_main (work_q.c:32)
==14823== by 0x10FD55: _thread_entry (thread_entry.c:29)
==14823== by 0x111CF7: posix_thread_starter (posix_core.c:301)
==14823== by 0x49673BC: start_thread (pthread_create.c:463)
==14823== by 0x4A78E15: clone (clone.S:108)
==14823== Address 0x87822a6 is in a rw- anonymous segment
The issue is that we had a pointer that pointed to local stack
variable and that pointer was used to access stuff after the
test function had returned.
Fixes#12006
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It was weird to pre-parse ICMPv6 headers in IPv6. Moreover parsing
failure of such header would not generate the right statistic.
Instead, centralizing all into net_icmpv6_input relevantly, and adapting
the test cases which were using that function. In RPL test, removing the
dummy dio test was simpler since dio is anyway tested later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The unit test gives net_context_get() an invalid protocol family
value which triggers an assert in net_context.c:160
This assert fails the test when it should not as we properly
check the return value. Fix this by disabling asserts for this
test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network interface mac address was not initialized properly
which caused assert in net_if.c:2881 to fail.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to store/reset/recompute the chksums, only compute it again and
if it's not 0: drop the packet.
RFC 1071:
"To check a checksum, the 1's complement sum is computed over the
same set of octets, including the checksum field. If the result
is all 1 bits (-0 in 1's complement arithmetic), the check succeeds."
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4, ICMPv4/6, UDP, TCP: all checksums are meant to be one's complement
on a calculated sum. Thus return one's complement already from the right
place instead of applying it in each and every place where
net_calc_chksum is called.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Many tests use either Ethernet or Dummy L2 and as such require
modifications towards the driver API on their fake devices.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPv6 is needed as there is special handling of IPv6 addresses
when MAC address is changed. We do not need DAD + other IPv6
specific features so those are disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that if network packet destination IPv6 address is
interface local scope multicast address FF01::, then those
packets must routed back to us when sending them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ICMP checksum was not placed to correct position in the
created test packet. This caused the checksum to be bad, and
because we now check the ICMP checksum, the packet was rejected
and the mld test failed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is organisation scope (ff08::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is site scope (ff05::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is zero scope (ff00::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is interface scope multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add two tests that will check if the source or destination address
is loopback address ::1 and we drop those packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Cache the used transport protocol in net_pkt. This way we can
avoid traversing IP header to get the last protocol in network
packet. This is mostly an issue in IPv6 which can have a long
list of extension headers after IPv6 header and before the
transport protocol header.
Fixes#10853
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some irrelevant errors were printed even if the tests passed.
Make sure that these obsolete errors at not printed so that
sanitychecker does not get confused about them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It might be that the test might access null pointer in some cases.
In practice this is not possible as the test is using pre-defined
data when running the test.
Fixes#10777
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed obsolete CONFIG_SYS_LOG_* and CONFIG_NET_DEBUG_* options
from various sample and test applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
*_ll_src/*_ll_dst/*_ll_swap/*_ll_if were not self explanatory, ll
meaning "link layer" it's ambiguous what the names meant.
Changing to:
*_lladdr_src/*_lladdr_dst/*_lladdr_swap/*_lladdr_if to fix this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to have setup and teardown functions. Teardown will
even cause crash when tearing down last IPv4 test.
Fixes#9617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Run networking tests for native_posix, qemu_x86 and qemu_cortex_m3
platforms only as the tests are generic enough so no need to run
them in real physical device.
Fixes#9623#9614#9622#9621#9618
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add checks so that we do not overflow the network interface
array. Similar issues was fixed in commit b4dae00741 for
TX timestamp tests.
Fixes#9465
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Fixes#9462
Coverity ID: 187670
Attempts to recalculate deltaBandwidth with no link lead to division by
zero.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Some locations like DHCPv4 client create a prefilled packet by appending
new fragments in a loop with one byte each via net_pkt_append_u8() which
is wasteful and noisy. This patch adds the new functions
net_pkt_append_memset() which creates fragments as needed in the desired
size and initialises it to the specified value.
This change also adds a unittest for the new function.
Prerequisite for #9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Commit ac92a01f5a changed the net_ipv6_hdr
definition. The ieee802154 fragment test wasn't updated to match this
change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As ethernet_api is larger than net_if_api, and we are accessing
ethernet_api elements in ethernet L2 driver, then invalid memory
was accessed in L2 ethernet.c.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that net_if_ipv6_select_src_iface() returns correct network
interface for a given destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit all Qav parameters are tested and the fake driver
properly stores and recalculates info about all the Qav parameters to
make them available for read-back.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The new mappings require at least two traffic classes so there are fewer
tests than there are for the strict mapping.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
In coap module previous test cases are modified as well as
new test functions are added to increase the code coverage
Signed-off-by: Tarun Kumar Agarwal <tarun.kumar.agarwal@intel.com>
As the test is testing neighbor discovery which needs to know
link addresses, we must run the test using Ethernet L2.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commit changes how the fake driver stores info about priority
queues. This allows it to test the Qav status API.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some Ethernet devices can filter out incoming packets through a list of
valid MAC addresses, so let's add a way to expose this capability, using
it through the ethernet device API.
Fixes#7596
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds the get_config callback to the fake driver and makes
use of it to get the number of priority queues. That number is in turn
used in Qav tests.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Test that user is able to turn on/off promiscuous mode and
also receive any data from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that user is able to toggle promiscuous mode flag
in network interface level and that flag value is passed
to device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test in ethernet mgmt level that promiscuous flag is passed
properly to the device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current implementation does not handle large extension headers
(e.g HBHO). Which resulted network stack crashes or due to
misinterpretation of lengths network packets are dropped. Also
caused issues while preparing IPv6 packet (e.g. large HBHO header
with IPv6 fragmentation support).
Issues fixed and provided more unit tests.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No need to run the tests in real hardware as there we can run
out of network buffers that happened with Atmel SAM-E70.
Fixes#8966
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Generate proper error if we run out of network buffers which means
so that the test can fail properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some hw like Atmel SAM-E70, the original amount of network
buffers is too small so increasing it slightly.
Also generate proper error if this happens in the test so it
is easier to figure out.
Fixes#8865
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test app creates two network interfaces, one for simulating
local device and the other one for peer device. Make sure that
the tests use correct network interface in each test. We cannot
guarantee that net_if_get_default() will always return correct
interface in different architectures as that depends how the
net_if structs are placed in corresponding linker section.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some hw like Atmel SAM-E70, the original amount of network
buffers is too small so increasing it slightly.
Also generate proper error if this happens in the test so it
is easier to figure out.
Fixes#8866
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The cb_[1|2]_called variables were initialized just before running
the test. This was too late as in some cases the Trickle timer
was triggered before the variables were init, which then caused the
test to fail even though there was no actual timer failure.
This was seen with frdm_k64f and when CONFIG_BOOT_DELAY=1000 was set.
Fixes#8658
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
If the sys_rand32_get() returns large value, then we might
decrement the clock which is not intended in this test.
Fixes#8657
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Split out definition of net_app_init() and its parameter flags from
net_app.h header to new net_config.h header. As we do this, rename
the function to net_config_init() and flags to NET_CONFIG_NEED_*.
This is a second step in splitting out network configuration API
out of net_app API, started in the c60df1311 commit.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Introduce TC_RESULT_TO_STR to convert from an integer test result to a
string like "PASS", "FAIL", "SKIP". Do this to remove the defines of
PASS/FAIL/SKIP since those names might get used by other code and to
have a single consistent way of doing the conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It is not necessary to link 'app' with mbedTLS because mbedTLS is
covered by the 'APP_LINK_WITH_MBEDTLS' mechanism that automatically
links 'app' with mbedTLS.
This patch removes the redundant target_link_libraries invocations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Test that Tx timestamp callback code is called properly if network
packet timestamping is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Both the vlan and checksum_offload tests expect to be run in
controlled environment where the test application is providing
ethernet connectivity. If the board under test has also ethernet
support, then internal checks will fail in the test application.
Because of this, disable on board ethernet so that the tests will
pass.
Fixes#8172
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The icmpv6, http_header_fields, mqtt_packet, dns_packet and
net utils tests were failing in frdm-k64f because of too small
stack.
Fixes#8171
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This symbol was renamed by commit 14e73e73c3 ("net: Make DEBUG config
option naming consistent"), but an assignment (and a commented-out
assignment) to the old name remained.
Fix the assignments to use the new name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
DNS_RESOLVER_MAX_SERVERS has the range [1,NET_MAX_CONTEXTS], with
NET_MAX_CONTEXTS being set to 4, but is set to 5. Out-of-range .config
values are ignored, so the symbol reverts to its default value (1).
Increase NET_MAX_CONTEXTS to 5. DNS_SERVER{1-5} being set probably
implies that DNS_RESOLVER_MAX_SERVERS shouldn't be decreased to 4.
This fixes two Kconfig warnings (out-of-range + didn't get assigned
value).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols were renamed by commit bf964cdd4c ("net: Renaming net
nbuf API to net pkt API").
Update the assignments to use the new names.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_NET_TCP_{TIME_WAIT,2MSL_TIME} were replaced by
CONFIG_NET_TCP_TIME_WAIT_DELAY in commit 89f57c225a ("net:tcp: Define
single condig option for TIME_WAIT delay"), which also switched from
seconds to milliseconds for specifying the delay.
Remove the old assignments and set the new symbol to give the same
behavior as before.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_NET_RPL_MC_ETX was misspelled as "..._EXT".
CONFIG_NET_RPL_MC_{NONE,EXT,ENERGY} are choice symbols. Setting a choice
symbol to 'y' implies that none of the other choice symbols are
selected, so remove the 'n' assignments and keep just the
CONFIG_NET_RPL_MC_ENERGY=y assignment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_IEEE802154_CC2520_AUTO_ACK started out as
CONFIG_TI_CC2520_AUTO_ACK, which was removed in commit 6b43821f20
("net: Remove legacy Contiki based uIP stack"). The assignments were
later renamed in commit 573774a9bf ("drivers/net/ieee802154: Change
configuration prefix").
Remove them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These were using the older name CONFIG_NET_NBUF_DATA_SIZE (note the
extra 'N'). The symbol was renamed in commit bf964cdd4c ("net:
Renaming net nbuf API to net pkt API").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The code was using MSEC() macro in few places instead of more
proper K_MSEC(). The MSEC() takes seconds as a parameter and
K_MSEC() takes milliseconds.
Fixes#7657
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test checked if the change was reported as successful and it always
was. What needs to be done is comparing whether the mac address was
actually changed to the requested one.
This commit adds this check.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
As this test uses dummy L2 driver, there is no need for ethernet
specific setup as that is not used for anything.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When creating IPv4 packet, the IPv4 header contained uninitialized
values. This was reported by valgrind.
Conditional jump or move depends on uninitialised value(s)
at 0x8066AB0: calc_chksum (utils.c:386)
by 0x8066C99: calc_chksum_pkt (utils.c:428)
by 0x806710A: net_calc_chksum (utils.c:487)
by 0x8067B8D: net_calc_chksum_icmpv4 (net_private.h:138)
by 0x8067FEC: net_icmpv4_set_chksum (icmpv4.c:90)
by 0x8068E7A: net_icmpv4_send_error (icmpv4.c:338)
by 0x807272F: send_icmp_error (connection.c:773)
by 0x80731A3: net_conn_input (connection.c:992)
by 0x806A34D: net_ipv4_process_pkt (ipv4.c:212)
by 0x805D8B9: process_data (net_core.c:103)
by 0x805D939: processing_data (net_core.c:117)
by 0x805E498: net_rx (net_core.c:300)
Uninitialised value was created by a stack allocation
at 0x804A437: setup_ipv4_tcp (main.c:297)
Conditional jump or move depends on uninitialised value(s)
at 0x8067117: net_calc_chksum (utils.c:489)
by 0x8067B8D: net_calc_chksum_icmpv4 (net_private.h:138)
by 0x8067FEC: net_icmpv4_set_chksum (icmpv4.c:90)
by 0x8068E7A: net_icmpv4_send_error (icmpv4.c:338)
by 0x807272F: send_icmp_error (connection.c:773)
by 0x80731A3: net_conn_input (connection.c:992)
by 0x806A34D: net_ipv4_process_pkt (ipv4.c:212)
by 0x805D8B9: process_data (net_core.c:103)
by 0x805D939: processing_data (net_core.c:117)
by 0x805E498: net_rx (net_core.c:300)
by 0x805E51D: process_rx_packet (net_core.c:312)
by 0x8085E87: work_q_main (work_q.c:39)
Uninitialised value was created by a stack allocation
at 0x804A437: setup_ipv4_tcp (main.c:297)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The options array was not initialized to 0 and the size of the
array was not set properly. This caused following error in valgrind
Conditional jump or move depends on uninitialised value(s)
at 0x8056777: coap_find_options (coap.c:1096)
by 0x804AEFF: test_parse_simple_pdu (main.c:455)
by 0x80500E6: zephyr_app_main (main.c:1585)
by 0x807E231: bg_thread_main (init.c:254)
by 0x80842D7: _thread_entry (thread.c:201)
by 0x8059618: posix_thread_starter (posix_core.c:301)
by 0x40752C8: start_thread (in /usr/lib/libpthread-2.25.so)
by 0x4182055: clone (in /usr/lib/libc-2.25.so)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will lead invalid IPv6 address to be generated. This was seen
in valgrind.
Conditional jump or move depends on uninitialised value(s)
at 0x40371A4: bcmp (vg_replace_strmem.c:1100)
by 0x8058833: net_ipv6_addr_cmp (net_ip.h:542)
by 0x805B999: ipv6_addr_find (net_if.c:768)
by 0x805BC8C: net_if_ipv6_addr_add (net_if.c:846)
by 0x804A7D7: _iface_ip6_add (mgmt.c:271)
by 0x804A5DC: test_core_event (mgmt.c:251)
by 0x804AD1D: test_mgmt (mgmt.c:320)
by 0x807EA81: run_test_functions (ztest.c:56)
by 0x807EC3C: test_cb (ztest.c:196)
by 0x8085AFD: _thread_entry (thread.c:201)
by 0x8051B43: posix_thread_starter (posix_core.c:301)
by 0x40752C8: start_thread (in /usr/lib/libpthread-2.25.so)
Fixes#7447
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes a coverity issue with checking the outcome of a call
to net_if_config_ipv6_get().
Coverity-ID: 183478
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes a coverity issue with dereferencing a null ptr. The
test needs to make sure there is a valid udp hdr before inspecting the
contents.
Coverity-ID: 183484
Coverity-ID: 183480
Signed-off-by: Andy Gross <andy.gross@linaro.org>
For many tests, avoid splitting into files and put eveything in main.c.
For many of the tests, use main.c as the test source file to keep things
consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add new test for testing IPv4 source address selection functions.
Refactor the tests:
- split tests to smaller pieces
- use proper zassert() statements
- print debugging information only when needed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of completely excluding those tests, mark them as skipped and
provide an noop function that marks the test as skipped where test is
not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Minor change to make test names consistent with other tests using ztest.
All test functions need to start with test_.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Close test sockets in test_send_recv_2_sock() to avoid Coverity
warnings.
Coverity-Id: 182764
Fixes: #6107
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add zassert's to check results of intermediate operations like
socket/bind/connect. Also, use symbolic expressions instead of
constants like 4 (for data length).
Coverity-Id: 182765, 182767
Fixes: #6104, #6106
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In Zephyr this has no effect because getaddrinfo() returns a pointer
to a static array, but Coverity scan checks for this pattern.
Coverity-CID: 185273
Coverity-CID: 185279
Fixes#7085Fixes#7091
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Previously, some fields like sin6_scope_id weren't explicitly
initialized. Such aren't really used, but to keep Coverity
happy, let's zero out the entire address structure.
Coverity-Id: 182763
Fixes: #6108
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Min RAM requirement for tests/net/utils was 16K,
hence run on nucleo_l073rz.
Though, build size is a little more than 20K which
overflows board RAM.
Increase min RAM requirement for this test to 24K
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This will prevent building these tests for boards not supposed to run
a TCP/IP stack, particularly 96b_carbon_nrf51 where test-with-dns
would not fit into 32 kB of RAM.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The test actually has three network interfaces in native_posix board
and not two so check that correctly.
Fixes#6988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Curently only link speed is exposed.
Opportunity taken to remove any post-fix enumerating the iface init
and/or the api: these must be generic and used by all the instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Because we now return first non VLAN interface if found, the
VLAN disable test case needs adjustment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests to verify the bit manipulation functions in net/vlan.h
file. Also check that we can check if given network interface has
VLAN enabled or not. Verify also that received network packet
contains correct VLAN tag.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the sanitycheck tests were having too small limit for
network buffers when compiling for sam_e70_xplained board.
Increase the buffer limits when testing this for this board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When dns_get_addr_info() returns an error it does not call the
resolve callback, and thus the semaphore will not be given.
This fix will avoid a deadlock situation for various errors.
Added some small tests for getaddrinfo().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Enable the loopback driver and set up network testing so that it
will not require a SLIP driver. Move values from the extra test
config so that they are always enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This demostrates how to classify the network traffic when sending
data. The application will create similar functionality as
echo-client so user can use echo-server running in remote host to
test this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we can set the priority of the network packet and
that high priority packets are sent before low priority ones.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that if the checksum offloading is enabled, then we do not
calculate the checksum. Also the normal case, where offloading is
disabled and we need to calculate the checksum, is tested.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network packet cannot be NULL so no need to check its value.
Coverity-CID: 183063
Fixes#6669
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_PEEK flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
We don't currently build on qemu_xtensa because completion is missing.
Seems like we have some dependency issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This tests websocket by creating a websocket support http server
and sending data to it and verifying the returned data is the same.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename variable zpkt to cpkt to complete the move from ZoAP to CoAP.
Remove unused tests/net/lib/zoap/CMakeLists.txt file.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Test case should first check for next block in the coap packet and
unref the packet (assuming packet has been sent).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Increasing the IPv6 multicast address count from 2 to 5 so that
tests will always run ok.
Fixes#4401
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
mbedTLS include directories will now default to be in the 'app'
include path when mbedTLS has been enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
1. MLD events now can happen before the test starts to run, (at iface
initialization time), so use static initialization of test semaphore.
2. Don't use a well-known multicast group like ff02::1 (all nodes),
as they are managed by the underlying stack. Use a dedicated test
address (ff10::1 here).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The following files didn't have any copyright or license headers on them
when they got contributed. So add the SPDX Apache license and
appropriate copyright info:
boards/arm/stm32l476g_disco/pinmux.c
samples/basic/threads/src/main.c
tests/net/socket/tcp/src/main.c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Relies on loopback network interface added recently and being able
to run QEMU without connecting to host networking.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add in6addr_any and in6addr_loopback which are defined in RFC2553 Basic
Socket Interface Extensions for IPv6.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Test ipv4/ipv6 send() and recv().
- Test ipv4/ipv6 sendto() and recvfrom().
- Test ipv4/ipv6 sendto() and recvfrom() with NULL dest address.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The call to net_context_recv() with timeout returned -ETIMEDOUT
even when data was returned properly and there was no timeout.
Fixes#4565
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If NET_L2_IEEE802154 and NET_IPV6 are enabled:
- NET_6LO is enabled
- NET_L2_IEEE802154_FRAGMENT is enabled
Thus removing setting this config options to yes where applicable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
From RFC 7252, section 3
"The absence of the Payload Marker denotes a zero-length payload.
The presence of a marker followed by a zero-length payload MUST
be processed as a message format error."
Check empty payload when COAP_MARKER is found and add a test case to
cover it
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The payload variable was one byte long but we read 32 bytes
from it.
Coverity-CID: 178064
Fixes#4397
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are simple tests for net-app testing. These do not try to
actually send anything to net but test mainly net-app setup and
close functionality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
set_ieee_addr, set_short_addr and set_pan_id are now unused by L2, so
removing their exposure through the radio API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Further support will need work per-driver basis, as soon as the L2 will
be able to make usage of such support.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As previous test without info, this one will be thrown with/without
receiver 1 and 2 times.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding net_mgmt_event_notify_with_info() which lets the event notifier
to pass dedicated data along with the event. The size of data that can
be passed must be limited to the biggest data passed (which will be
currently IPv6 + prefix).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ZoAP tests are modified to use new CoAP API. Also modified tests
name from 'zoap' to 'coap'.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
- Add test cases of ipv4/ipv6 sendto() and recvfrom()
- Set the main stack size to 2048 to enable both ipv4 and ipv6 on
qemu_x86.
- Use net app for network setup.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
These tests test the IPv4 multicast address add, lookup and
removal functions found for network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 is disabled, then it is useless to try to resolve
IPv6 address because "struct sockaddr" does not have enough
space to store IPv6 address.
Fixes#1487
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixing regression, address family is now called sa_family.
The testcase.yaml file was missing so no tests were actually run.
After making test to run, it was also failing because link address
was accessed before first fragment was set. This caused null pointer
access.
Fixes#1474
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were bunch of config options in tests/net, net-shell and
wpan_serial sample, and those options had wrong name so they
were ignored by the code.
Fixes#1428
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the query name is already in numeric format, there is no
need to send the query string to DNS server as we can just
convert it ourselves.
Jira: ZEP-2562
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The verify_send_report() failed in quark_se_c1000_devboard because
the multicast group was already joined. We can safely ignore this
error for this specific test.
Fixes#1240
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Arguments are not needed and in some cases are being set as unused in
the same function. The test_main function is called from ztest main
routine without any arguments.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This patch convert net test cases to use ztest framework APIs
which makes output unified to other test cases.
Signed-off-by: Punit Vara <punit.vara@intel.com>
This patch convert net test cases to use ztest framework APIs
which makes output unified to other test cases.
Signed-off-by: Punit Vara <punit.vara@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size to 1024
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- added CONFIG_ZTEST_STACKSIZE=320
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size to 896
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced the size by half
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in config file, reduced size by half
JIRA: ZEP-2249
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This enables IPSP node role which requires IPSS GATT service to be
registered.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
This is a configuration that is unrealistic and used only to verify
Kconfig dependencies, trying to build this for every board fails due to
size limitations and due to unavailable device support on some of those
boards, building for qemu targets should be good enough.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In many networking tests we had to configure SLIP in the prj.conf
leaving those configurations Qemu specific. This change enables SLIP for
QEMU targets automatically and allows reuse of prj.conf for multiple
boards.
Additionally, the TUN options is removed. This option was not used
anywhere.
To enable self-contained networking tests that do not depend on SLIP, we
introduce the new option NET_TEST which disables TAP and allows testing
in QEMU without the need for a host interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Imax doublings value was too large which caused overflow
of Imax_abs value, which then could cause Trickle test to fail.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The majority of these fixes adjust the memory limit needed to build the
various tests on systems with and without BLE support. We also fixup
one test case that was able to run on platforms with 16k of memory.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of the network tests have minimal memory requirements that not
all boards are able to meet. Add in those memory requirements so we
don't attempt to build these tests for those platforms. Utilized the
frdm_kl25z (with 16K of memory) and cc2650_sensortag (with 20K) to test
the limits.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Instead of only running net tests in qemu_x86, enable those
tests in all suitable platforms. The tests are disabled for
bbc_microbit as that platform does not have enough memory.
The tests/net/arp and tests/net/ieee802154/l2 are disabled
for qemu_xtensa as the qemu crashed when running the tests.
For tests/net/all there was a weird build error for qemu_xtensa
so that test is also disabled for that platform.
Increased the trickle timeout to 3 secs in tests/net/trickle as
occacionally there was timeout error in qemu_cortex_m3 when the
test was run.
Jira: ZEP-2398
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
According to RFC7959 page 30, "The end of a block-wise transfer is
governed by the M bits in the Block options, _not_ by exhausting the
size estimates exchanges."
Therefore, we should check the M bit instead of total size (which
is not always available, too)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Some README files referenced wiki articles that have been
moved to the doc area on the website.
Fixes#668
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The sequence number validator was checking the seq numbers
incorrectly. This caused some valid RST packets to be dropped
and the TCP stream to hang.
Added also a TCP test case that tests the seq validator.
Jira: ZEP-2289
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to set the main stack size as the test runs just fine
without it.
Jira: ZEP-2341
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The QEMU targets have plenty of RAM now and the current value
specified wasn't a multiple of a 4K page.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A network stack thread was trying to use a semaphore before it was
initialized. Set it up at toplevel so it is ready to go.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove NET_TCP_HDR() macro as we cannot safely access TCP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the TCP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_ICMP_HDR() macro as we cannot safely access ICMP header
via it if the network packet header spans over multiple net_buf
fragments.
Jira: ZEP-2306
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT should be used instead of
CONFIG_NET_IFACE_UNICAST_IPV6_ADDR_COUNT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The test starts the last one: after the driver and the net stack.
However, the net stack (due to DAD and else) will already try to send
some packet, resulting it giving a uninitialized semaphore. But once
properly initialized, this semaphore will end up with a non-zero count
when the test will start: thus reseting it to 0 before running the
tests.
Jira: ZEP-2319
Reported-by Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Test whichever had Camel case defined for functions and variables have
been replaced.
Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
enclosed in a do - while loop
- do not use C99 // comments
JIRA: ZEP-2249
Signed-off-by: Punit Vara <punit.vara@intel.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is confusing if we print timeout error when expecting
a timeout to happen. So for timeout test, do not print
an error message as the timeout is suppose to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP tests had several failures because of unnecessary
Kconfig options. These are now fixed and the TCP tests are
also run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The MLD (Multicast Listener Discovery) tests had a failure.
This is now fixed and the MLD tests are also run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 tests had failures and the tests did not pass
properly. These are now fixed and the tests are also
run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The net_pkt_split() was incorrectly checking fragA pointer
even before it was allocated.
The unit test is fixed and converted to ztest.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
llvm complains about char* -> u8_t* type conversion.
tests/net/ipv6_fragment/src/main.c:645:52: warning:
passing 'char [11]' to parameter of type 'const u8_t *' (aka
'const unsigned char *') converts between pointers to integer
types with different sign [-Wpointer-sign]
bool written = net_pkt_append_all(pkt, data_len, data,
Jira: ZEP-2274
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The main thread was doing nothing but spawning another thread to perform
the test. Delete the alternate thread, and just do the test on the main
thread, adjusting stack size and priority as necessary.
Issue: ZEP-2236
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When src and dst addresses are compressed based on context
information, uncompression method should verify CID bit,
SAC and DAC bits and context ID's. But it has missed some
cases which resulted in invalid uncompressed IPv6 header.
e.g. CID is set, SAC is 0 and DAC is 1 and context id's provided.
Uncompression method assumed that src address is compressed based
on context information but it is not.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
These tests make sure that the IPv6 fragments are build correctly
when a large IPv6 packet is being sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As this is a test, it's minor issue, but let's keep Coverity report
clean.
Coverity-CID: 169303
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This tests enables all networking features and requires lots of RAM, so
increase the available RAM to avoid failures due to not enough RAM when
building.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We did not check UDP or TCP checksum to be valid after receiving
the packet. Fix this so that the checksum is validated when
packet is received in connection handler. As the checksum validation
can be resource intensive, do it after we have verified that
there is a connection handler for this connection.
The checksum calculation can be turned OFF if needed, but it is
ON by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Only 2 attributes lacked this prefix, which makes sense to have, so
applying it accordingly and changing the helpers as well.
Change-Id: I095b2729f977f8fb1624eff8801a4a4e21416693
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This creates a test case that enables all the currently known
network related Kconfig options. This is useful so that we can
compile test various Kconfig options. Note that the result binary
is not meant to be run anywhere and it will probably not run as
some of the enabled options do not make sense in real life.
Change-Id: Iede36131b43d95acb78b4094004626e1b86e0f95
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since commit-id 1ab40390c9 arp_input()
unrefs the buffer on success (NET_OK) so no need to do it afterward.
Change-Id: I84ab7e8eb07f50d52b329e4c025d88753a5de4db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The Kconfig.rpl file was missing option to actually collect
RPL statistics. Unified the config option name to be
CONFIG_NET_STATISTICS_RPL as there was two conflicting settings
in the code and both of them were missing from Kconfig file.
Change-Id: I4ce4fcbaa317b36cac315ea3b3f710fa7a344b25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add two testcases for mqtt_publisher and mqtt_subscriber.
The combination of the two, covering most of the MQTT APIs.
Change-Id: Ib663ee1f550362ca493501046ddf8508a25ac956
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
Add net_nbuf_split() function that can be used to split
an existing net_buf fragment into two arbitrary length pieces,
and return the two new fragments to the caller. The data from
the original fragment is copied into these two new fragments.
Existing fragment is not modified.
Change-Id: I463e675232c6e19c2a42929f480893a6d1265873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Incorrectly use variable even if it is null.
Coverity-CID: 157593
Change-Id: I883421a16870e5fe3c1d81e461f55f912ea168c0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It needs to check if current event matches:
- cb's layer
- cb's layer code
- cb's command
If none match, it will not raise the event.
Fixing the unit test as layer must be always != 0.
Jira: ZEP-1940
Change-Id: Iadd63e751fa6e534a10e7da9cae0f5bb5a384461
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most (if not all) 802.15.4 devices can handle ACK replies by
themselves.
Change-Id: I0319d59de767b20eb67c1592bacaa4a7b7015cad
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
commit id 7a11439020 changed this.
Hopefully that changed did not affect anything.
Reducing minimal frame length and applying the change everywhere where
relevant.
Change-Id: I5ae203751bfcf70cef833620106d2c2d0e33b7a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will first run the datasheet example.
Change-Id: Ic4da5ba9170a253cfdff4b17010d72dc86376555
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The neighbor was added very fragile way into neighbor cache which
caused following queries to fail. This is now fixed by manually
adding neighbor to the cache.
Change-Id: I1831557fd5f9df5afd0a6c6833b0af769f5167eb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Couple of tests started to fail without any apparent reason.
Disabling them temporarily until the root cause is found.
Change-Id: Id82e0eab60dc744c8ce6f02a5834e731be153883
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refining the names around IPv6's neighbor states to differentiate them
easily from any net_nbr related names (which are not tighten to IPv6).
Change-Id: Ibc24df2a9485477a53fe5fe1c8f993f0fcd91635
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to commit 8308b9bd2d ("net/http: Add the HTTP/1.1 API")
every user of CONFIG_HTTP_PARSER would need to add CONFIG_HTTP to
their .conf files. Which is fine for intree samples/tests as they
have been adjusted, but the rest of world working on Zephyr apps
will need to make this changes as well.
Instead, we should have each of the following select HTTP instead of
depend on it, which will make future use of these configs and their
dependencies more intuitive:
HTTP_SERVER
HTTP_CLIENT
HTTP_PARSER
NOTE: As cleanup, this commit also removes the CONFIG_HTTP added to
samples and test .conf files.
Change-Id: I81cfaa19e37333b1bf98778f8147814780e7f77c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Add CONFIG_NET_IPV6_NBR_CACHE option that is the base for both
neighbor discovery (ND) and duplicate address detection (DAD).
Both ND and DAD can be disabled if needed. If NBR cache is
disabled, then ND and DAD are disabled too.
Note that it makes not much sense to disable DAD or NBR cache
as IPv6 will not work properly without them. It is possible
to disable ND but then the neighbor information needs to come
via other sources like RPL.
Change-Id: I57c8668ad828b3a153dfc58eea78bf5f7ac3938a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the proper MAC address space (00-00-5E-00-53-xx) dedicated
for documentation and specified in RFC 7042 ch 2.1.2.
Change-Id: If8ef9e4ee4e041ad005060664ebafe60df0a6bf9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test net_mgmt_event_wait() and net_mgmt_event_wait_on_iface()
Change-Id: I82ba70a697f0d13aa2e1eef2110e139b3621c119
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of creating a handler and a related callback structure on an
event_mask: net_mgmt_event_wait() can be used to wait synchronously on
such event_mask. The core mgmt part will seamlessly reuse the struct
net_mgmt_event_callback so the whole internal notification mechanism is
using the same code.
Change-Id: I426d782c770e75e5222aa3c5b703172b1f1f2e5e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current finalize api's takes buf as input parameter and returns
the finalized buf. But if there are any issue while finalizing,
it failed to throw an error.
Change-Id: I6db54b7453eec41a8051fab50d5c0dc937debd54
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As per RFC 6775 4.2, context length holds number of leading bits
in the Context Prefix field that are valid. Rest are not valid
for compression.
Change-Id: Id21cc2d7a5d42980cf9295f85e75c4869ff6cb99
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch adds some routines to evaluate DNS responses as specified
by RFC 1035.
Jira: ZEP-1876
Change-Id: Ia78a1175229962128a0bcee985e507d72ed26aea
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the HTTP/1.1 API for Zephyr. This API consists of client
and server context structures enabled via Kconfig variables.
HTTP parser support is enabled via the CONFIG_HTTP_PARSER configuration
variable.
Currently, this API only includes support for writing HTTP requests
(client mode) and HTTP responses (server mode). TLS support is not
considered in this iteration.
Supported HTTP methods:
GET, HEAD, OPTIONS and POST.
Supported HTTP responses:
400, 403 404. The http_response routine may be used to write
any HTTP status code, for example 200 OK.
Jira: ZEP-1701
Change-Id: Ic9ccd4d4578d6d0f3a439976ea332b031644ca7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the test case for the DNS API low-level routines.
The following routines are evaluated by this test case:
- dns_msg_pack_qname
- dns_msg_pack_query
- dns_unpack_header_id
- dns_header_qr
- dns_header_opcode
- dns_header_aa
- dns_header_tc
- dns_header_rd
- dns_header_ra
- dns_header_z
- dns_header_rcode
- dns_header_qdcount
- dns_header_ancount
- dns_header_nscount
- dns_header_arcount
- dns_unpack_query_qclass
- dns_unpack_query_qtype
Next iterations will consider IPv6 and DNS RR coverage.
Jira: ZEP-1499
Change-Id: I4ef46203e6fec57c6fe5a5db8132ed140b412fc2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Make sure that the network interface has proper allnodes and
solicit node multicast addresses set.
Change-Id: I2318d63df0b5d09dfaa8347b69c843b84ed63f4b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests for verifying that we can receive Multicast Listener
Discovery query and act on it.
Change-Id: I926cf5e9f77cd250d2d7094f2379e320ef163540
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive MLDv2 (Multicast Listener Discover) query,
we send out information about the multicast groups that
we have joined.
Change-Id: If4ea9fa685319b2ad900e1949a5cbe12e7696b43
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
MLD (Multicast Listerer Discovery) unit tests when joining
or leaving an IPv6 multicast group.
Change-Id: I7cd0f4c5f31c693d816fb5d27d3d23bb27679c35
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we setup the network interface, add predefined IPv6 multicast
groups into the network interface. When interface is taken down,
then leave all the multicast groups that joined.
See RFC 4291 ch 2.8 for details.
Change-Id: If17d3e8c75157a02aa93c92e2fb499619c1484cf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This and subsequent commits adds API to join or leave
an IPv6 multicast group.
Jira: ZEP-1673
Change-Id: I26dcfe16a4527dbf7886a30827a5d4ebfdeaac01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Variable len is not used in net_icmpv6_input() and if required
it can be obtained from 'buf'.
Change-Id: I4b0710e1cf16cff9837173ad9d6908ec54ebafae
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of always calling net_nbuf_get_reserve_tx() with zero
ll_reserve (first parameter) and then setting the link layer
reserve separately, pass the reserve to that function which can
then set the ll_reserve in buf itself.
Change-Id: I21c14cb7e2e6c36d170c09998bca0207ecf65c75
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ll_reserve parameter is useless in net_ipv{4|6}_create_raw()
function as the reserve information is already stored in buf.
Change-Id: I7815a78c001e3da532478c04b3dac9b37bbc723c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code used net_nbuf_get_reserve_{rx|tx}_data() function to
allocate a fragment. Instead of that low level function, use
net_nbuf_get_frag() instead. There are few places this is not
possible or is too big change like in few test programs.
Change-Id: Ied7e2b7db352de998b200ffa6ff82471bfa5ebe3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It makes no sense to modify the original net_buf so change the
copy function not to touch the original buffer.
Change-Id: I5d22445ce50cee62994c36567f0e995a500cb89d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The first parameter of net_nbuf_copy() must be the head
of the buffer chain i.e., it must contain the user_data
part. If a fragment is given, then we do not know enough
information to allocate the data fragments.
Change-Id: I052b183d8c63d7326b320254f36f00b2fc48b0a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that the buffer waiting for retransmission is modified
after it is sent, for example, it can be compacted by 6lo, and our
assumption of where is the message ID is located in the buffer is no
longer valid.
As the message ID is the only information that is necessary for
keeping track of retransmissions, we keep a copy of it in the pending
struct, as well as the destination address of the retransmission.
Change-Id: Id33d54353404628673541225a1a05e27ee08765f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This unit test verifies that zoap_packet_get_payload() returns the
expected size for received packets.
Jira: ZEP-1662
Change-Id: Ibe011959f4d6593f4f20f0f5901c9033c76c9518
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The interface L2 address type is set at the same time as the
L2 address is set to the network interface. This is most
convinient place to set the address type.
Change-Id: I712d7357d075959eb79df3463141cfbc6d163a74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently, for the following MQTT msg fields:
- client_id
- will_topic
- user_name
- topic
their length is computed inside the routine that receives the MQTT msg.
Although this simplifies development, also imposes one restriction:
data must be null-terminated. Sometimes, data is received from other
sources and not generated by the application, so the null-terminated
constraint may be considered problematic for the user.
This patch removes the assumption that string fields are null-terminated.
Current data structures are already prepared to handle this case, so no
API change is required.
Change-Id: I5a147a5b21e0da49541cbe62baac363c8737cd3e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Using net_buf_unref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Ieaa0978aa69e2f0baa924fe842ca1f116c348ef1
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current API description of net_nbuf_compact() is not very clear.
The first parameter needs to be the first net_buf in the chain.
The changes to this API are needed in order to clarify following
use cases:
1) User provides fragment that is not first of the chain and compact is
successfully done. In this case there is no free space in fragment list
after the input fragment. But there might be empty space in previous
fragments. So fragment chain is not completely compacted.
2) What if input fragment has been deleted and api returns the same
buf?
So this commit simplifies the API behavior. Now net_nbuf_compact()
expects the first parameter to be either TX or RX net_buf and then it
compacts it. It fails only if the input fragment is a data fragment.
Change-Id: I9e02dfcb6f3f2e2998826522a25ec207850a8056
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The net_nbuf_push() API is not used by anyone. Semantics are not
clear and following patch requires changes to push api, so removing
this API for now. If needed this can be re-introduced later.
Change-Id: I1d669c861590aa9bc80cc1ccb08144bd6020dac5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Test with max data in order to test the fragmentation code better.
Change-Id: I301a96eae1dd637f0291354120389c2bd7575695
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we send unicast NS, then the destination IPv6 address needs
to be in the neighbor cache, otherwise we have a NS sending loop.
Change-Id: I11e8f5d5740248024a0becc77055786cd2e32199
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The compact function was never really properly tested
but it is used by other routines that have unit tests.
This commit makes sure there is a special testing for
the buffer compact function.
Change-Id: I35c108fd8459a9482ccae68a51ffa28fb2e0ae99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Option CONFIG_NET_IPV6_NO_DAD is not used anymore, clean project
configuration files.
Change-Id: I368e076d2f79f1d4bc86edee11ff5befe37362c8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Routing tests uses ND so do not disable it, otherwise tests might fail
if disabling ND supported.
Change-Id: Ie020de8dac4447931d1067f1ed781a72cf05e8af
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.
Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.
Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is no longer used so it can be removed.
Use CONFIG_NET_IPV6_ND option instead.
Change-Id: Ibaa3d3deb52b8b176e85f8b9e1d8c80c1026aea1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use printk(), snprintk() instead of printf() and snprintf().
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf()
will not output anything without it.
Change-Id: I5899741df2e187dae7b4602d074e9b4cbb9952aa
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The debug config was incorrect.
Change-Id: Id32cbcfb809acc9e4ab202b401d25e41a7531c42
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It is useful that the user API can know whether the connection
was established properly or not. So this commit adds status
parameter to connect callback in net_context API.
The call to connect callback needs to be set properly in TCP
code. This commit does not fix the connect callback call which
is not properly done right now in net_context.c.
Change-Id: I284a60ddd658ceef9e65022e96591f467a936a09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the prefix length % 8 is not 0, then the remaining
bit length was calculated incorrectly and the prefixes
were claimed to match even though they might not be the
same.
Adding a test cases for testing this properly.
Coverity-CID: 157591
Change-Id: I9cb5a73d5cc211ec183176400fa5e2dfd209e2da
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Introduce NET_LINK_ADDR_MAX_LENGTH which is either 6 or 8
depending on whether CONFIG_NET_L2_IEEE802154 is used
- Instead of being a placeholder single index array of uint8_t,
let's use NET_LINK_ADDR_MAX_LENGTH to assign the size of the
"addr" array field in the net_linkaddr_storage structure.
- Now that the "addr" field of net_linkaddr_storage contains the
true size of the link address, we can remove "storage" field
which was hard coded to 8 bytes (2 uint32_t's).
- Fix 2 references to the "storage" field of the net_linkaddr_storage
structure.
Change-Id: I2ea12058280b289f65085964eb7d503d4fd260c2
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The source address for a TCP SYNACK must (obviously) be the same as
the destination address of the SYN that produced it. But the existing
IP packet creation routines would simply fill in a default address
from the net_context struct, which is correct for *established*
connections, but for the listening socket is generally INADDR_ANY
(i.e. all zeroes) and will result in an arbitrary choice for source
address (e.g. a link-local address on the same interface) which can
easily be wrong.
So we need to pass the correct address all the way down from the SYN
packet handler code through the net_ipv*_create() packet creation
functions. This requires lots of API plumbing, but relatively little
logic change.
Change-Id: Ic368f8cef6689f8a27cbafd5933a4964d5cc457e
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
quark_d2000_crb does not build as ROM and RAM space are way too little
for it.
Change-Id: I1a5992dcd49f90fa6604cd8ab76db7e170be7cd4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add a test for the available space for the payload, so the problem with
the payload length doesn't regresses.
Change-Id: Ifef541d8428947eb482729aa773a7e9ddd2b6f81
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes:
error: format '%u' expects argument of type 'unsigned int'
Change-Id: I02aaaea79150967d7831d89d0c05427bf2685708
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes this:
error: ‘zero_addr’ defined but not used [-Werror=unused-const-variable=]
...
Change-Id: I5b0baf597e62f3206e15638a63e129503b76b048
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since the user data size is now stored in the pool there's very little
value in storing it as well per-buffer.
Change-Id: I17a99123b232423c52a2179b4eccd813728d51b1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is only for use with custom destroy callbacks, so that the
application gets isolated away from the details of how exactly the
buffers are managed. This opens up the possibility of switching away
from k_fifo to potentially better solutions, such as k_lifo.
Change-Id: I0d8322fdec3500d8ae060ae471b9448aeaa4572a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Restructure the RANDOM Kconfig to match the structure used in other
drivers with a single top level menu. Move the true random number
generators to appear first in the menu, with pseudo generators at the
bottom. Do not present pseudo generators if a true random generator
is presented.
This change implies that tests, samples and applications that require
the random driver interface must now select CONFIG_RANDOM_GENERATOR.
In order for tests and samples to build (and run) on platforms that
have no random driver it remains necessary to select
the CONFIG_TEST_RANDOM_GENERATOR.
Note that CONFIG_TEST_RANDOM_GENERATOR retains its original purpose of
enabling a random driver that delivers non random numbers for the
purpose of testing only.
Change-Id: I2e28e44b4adf800e64a885aefe36a52da8aa455a
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not enough memory on this device with 8K of SRAM
Change-Id: I359cce806098cac7e0e2a9e00ce40c91bc535c5b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
to use the new location of the IP stack
Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check that we change the ll address in neighbor cache
properly when receiving NA.
Change-Id: Ib0373751abebdfe1c5e83fd38ec91b9587797e32
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Peer address is used when sending NS so that it is added
properly to neighbor cache.
Change-Id: I51c2e236a0b137f7ab086a782f3baced13aa3ee3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Also disable prefix lifetime overflow test as it does not work
properly.
Change-Id: I54c8716f6a6d4f5bec76b0a61fe0e18e983924f4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current reassembly of 802.15.4 packets works only if fragments are
in correct order. But as per RFC 6282 reassembly should be based on
offset parameter in fragmentation header.
Change-Id: Icdcb10b9aa8f5837063b0201a64f8eb050c75681
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There were different tags defined in testcase.ini files for
networking tests. Unify these and change the tag to "net"
in all networking tests. This makes it easy to execute
all network tests via sanitycheck.
Change-Id: I8ce7ccf8cccca35234602e37f6568db0b986d181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_buf tests were including net_ip.h which requires some
extra config options to be usable when the new native IP stack
is used. In order to avoid this dependency, define struct in6_addr
locally in the source file.
Change-Id: Iafe0d2b5b507665baaed23f5e2c55a9d9a300d47
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Which happens only when internal DEBUG is set to 1
Change-Id: I175943f32065ae81b1a4453dde40f36738c28084
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of having to write "NET_TCP_BUF(buf)->flags & NET_TCP_CTL"
every single time, provide a NET_TCP_FLAGS macro that expands to this
expression.
Change-Id: Ie876c538599fabae6b800a53613b6ad17dc45620
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Dropping legacy API. This commit also contains updated
unit tests in order to pass the test.
Change-Id: Ibc7426837e2f4f23bb5f3ed3719635c5c3d0ed0f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
More logical place for net_ipv6_unspecified_address() is in ipv6.c
instead of net_if.c. Removing the net_if_ipv6_unspecified_addr()
variant as it is no longer needed.
Change-Id: Ib5b4f6748030a8bf50fb848a87eef2968e2bcbc8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adapting all unit tests so:
- main task's prj.mdef is already provided by unified kernel with a
default stack of 2kb.
- unified is the only kernel to be used now, removing unecessary kernel
type make option.
- removing all NANOKERNEL/MICROKERNEL related #ifdefs and so on.
Change-Id: I9b853dbd2aef971d355188cbf7fe2ececaaa80c1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This creates a `struct net_conn_handle` that's only used as an opaque
pointer. The purpose is to avoid assigning a void* to a void** in
connection registering/unregistering functions, avoiding a
previously-caught bug by issuing an incompatible pointer types warning:
warning: passing argument 7 of 'net_tcp_register' from
incompatible pointer type [-Wincompatible-pointer-types]
Suggested by Andy Ross in 5beec6. This particular commit didn't catch
any bugs, but the one caught in 5beec6 wouldn't exist if this were in
place at the time.
Change-Id: I5c13fb4c5826adce6397feb7b400d36e426c4a87
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Added a test to send HBH option to IP stack. Currently
the test will always pass, activate some more debugging
to see what the IP stack is doing with the option.
Change-Id: Id0ab1590eb8216f5f67c4d43ce2e882186334198
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to store routing protocol specific data
into neighbor entry. By default no extra data is allocated.
Change-Id: Iabff0a1df676398a47b86adbc398c4f566dcc40a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Microkernel test for 6lo was giving error because the
prj.mdef file was refering to wrong function name.
Change-Id: I4197c509fb266a908eb03cc0bda34e39c66b229c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
fragment is only about testing 15.4 6lo fragmentation, so let's put it
in dedicated tests/net/ieee802154/ directory.
Change-Id: Ib838600e571753ab976c74dac78ee774f628c2ab
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
So reordering files in order to put more specific tests in it.
Change-Id: I000bc5efb8442d02e9a50e1b85cb45e0bec12789
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No reassembly logic is changed besides removing the final reassembled
pointer. Instead of requiring such pointer, let's just use the frag one.
Such changes will ease the usage of ieee802154_reassemble():
the given frag buffer, in case it finally got reassembled and thus
provided a NET_CONTINUE verdict, will directly be handled by net_core.
This makes things consistent as well with verdicts:
- in case of NET_OK, buf has been consumed and thus unrefed
- in case of NET_DROP, buf needs to be unrefed by caller
- in case of NET_CONTINUE, buf is updated with reassembled and
decompressed data packet, up to net_core to handel it accordingly.
Change-Id: Ibd1588debd22a7f4571b36713dd46bf8b1d88329
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As soon as fragment is put into the cache and as long as it is not
identified to be the last one: let's return NET_OK to notifiy the
fragment has been consumed by ieee802154 L2.
That way, net_core will not try to interpret it - and fail - unnecessary
increasing the drop statistics.
On the contrary, once the buffer is fully reassemble, let's return
NET_CONTINUE in order to let net_core consume the buffer relevantly.
Change-Id: I715b687e451f4643656e122b0d119f114696340b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Buffer sent by 802.15.4 L2 might have more than one fragment, thus
handling it properly.
Change-Id: I12fef8a9c5de56615c3a084c57f438e71b320fcf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since "22e919872206b1d net: Adapt to new behavior of net_buf_frag_add"
net_buf_frag_add() takes onwership of the fragment, so this _unref()
after a net_buf_frag_add() is wrong.
Change-Id: I1559c2978cf8d800891d6e752478537fbee7c02b
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This enables the tests for the observer feature to be run using the
native IP stack.
Change-Id: I325dcd1f5d9fffe3821eed1bd950a717e5f17b67
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Earlier test results was updated as soon as test server ACK client
dhcpv4 request. But update results on IPv4 address add event on
interface.
Change-Id: I212309a4d1d2eae88f73470e00754db1d6fecda5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RFC2131 requires that a client must choose XIDs in order to minimize
the chance of collision with another client. Selection of a random
XID at boot is a valid approach. Adjust the XID representation from
array of bytes to the more convenient uint32_t representation,
initialize the XID to a random number and increment for each request.
Refactor the dhcp test case to generate response messages with the XID
from the received message.
Change-Id: I93f180e6aa02430f807e0a97186577dc956fb653
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The test "Test block sized transfer" does not work with
new IP stack so disable it temporarily for new stack.
This needs to be fixed later.
Change-Id: Ie89dd101270ab9b8a9b056757de79cd3da009180
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename project configuration to be architecture independent and do not use ARCH
in Makefile.
Change-Id: Ic793751e3187bc74fd14cec929754d691b01a799
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This provides only initial set of functionality tests
for TCP. More tests are to be written.
Change-Id: I157fed85f561523bf063732ce86eaae551c2d384
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current net_nbuf_write() api just appends data to last fragment. And
doesn't write data based on offset. That's why renaming this api.
New net_nbuf_write() apis based on offset will be coming soon.
Change-Id: Ie8e13e5f6091a279b62b6d8b0b3928a5187e75b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This ports zoap to the native stack.
Just for reference, and totally not scientific, here are the numbers
using the old stack:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
34657 10316 16916 61889 f1c1 outdir/qemu_x86/zephyr.elf
With yaip:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
30575 9148 6164 45887 b33f outdir/qemu_x86/zephyr.elf
Jira: ZEP-818
Change-Id: I7992a3e2af7d419081ee5a64d7cc2d49fb628ead
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Valid case:
1) If the offset is more than current fragment length, adjusts offset
from next relevant fragment and starts reading or skipping.
2) If the read or skip length is more than available data length,
then throw an error.
In case of an error, frag is 'NULL' pos is '0xffff'. Rest of the cases
are successful read and skip.
Change-Id: I88c4b85e14e5821f681966b5148ba9519b91cca4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RFC 6282, 3.1.1 (If SAC == 1 and M = 0, DAC = 1).
Source and Destination address compression support if addresses are
based on context based information from Router Advertisement message.
Change-Id: I23a3bf4f111016a8e54be5f0181a113353ad4b88
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Test is only for parsing 6CO data. Nothing more than that.
Change-Id: I7e5851f389216473379a9e50b83dfb03fbe1e68e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The memcmp() could reach after the buffer that is used for verification
ends, which was causing this test to fail on the qemu_cortex_m3 board.
Change-Id: Ia05df823f201d9017acb35c7634fa506389ae9f1
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
linearize() expects the amount of room available in the buffer.
Change-Id: I1062912f76951758177b7dd6588e7e0ae280dc03
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Quark D2000 doesn't not have enough RAM for these tests.
Change-Id: Iba79eaadb15eb8f1eae4bfdbc6865985d3da3fd3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Buffer leaks are fixed in 6lowpan compression and ieee802154
fragmentation. So lower the count in tests.
Change-Id: Ic9581f898156fedc20a3e445be8b7a466ee15d99
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
A fake network device and interface are setup. Test implies add and
removing an IPv6 address which should trigger the related notification.
Change-Id: I6035cfbfaf80c8f4352b5d31b47ca1445434d926
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
While doing some documentation for it, I realized names were not all
good and it missed some stuff:
- what belongs to event should contain "event" in it
- we have a structur as callback so let's type the handler as a handler
- let's add the request handler signature
Change-Id: I18822cbcdc3c10e33600d6db38abab5ca73a228c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use ?= for the CONF_FILE variable to match the default assignement for
BOARD ?= qemu_x86.
Change-Id: I0b6cf1e967eeb437d99aa7286cf560426d48fbf9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
It mimics how event could be thrown through a dedicated thrower (a
fiber). The amount and event it can throw is gived through parameters.
Change-Id: I484bc72bdb730a77ce976b0b2998411d9918b7fc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Basic unit tests for Router Advertisement message handler.
Change-Id: Ia99cd160632972a12e2099a3ff6e41e6ea48ff9b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The buf parameter cannot point to a data fragment in
net_nbuf_write() because we need to use user data inside
that function and the fragments do not have that information.
Change-Id: I45b9c23869df08a0852bd99c0b453210ad2300b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests for net_nbuf_read, net_nbuf_write and net_nbuf_skip API's.
Change-Id: I77f702dda8c9df7892120f47ff03a6b256191d31
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
One second timeout seems to be too short as some test runs
fail when run in Jenkins.
Change-Id: Ifb01929148415961712468e3cc85387aac5eb2bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It's an empty beacon frame, juste to validate the Beacon frame parsing
logic.
Change-Id: I90916eb87187c9eae9b2267f34dc93bee554d4b5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If ethernet address is broadcast or multicast, l2 layer does not
send any ARP messages. Handle this scenario in ethernet tests.
Change-Id: I8e11832803e1539887152447090d1286c7fa3eb0
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the connection establishment has an error, the accept
callback needs to be able to return that error to user space
so that the application can know about it.
This is especially important in TCP where application needs
to start to listen again if reset is sent during connection
establishment.
Change-Id: I55f36e4f101c7237c1288f09baf6e602b33da2b3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the DEBUG options for the new IP stack still used
the CONFIG_NETWORK_IP_STACK_DEBUG_ prefix.
Change-Id: I8f039ac5e303a7c571a870403ce17d758db540d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- new stack options are renamed and placed in their respective menus
- new stack Kconfig gets normalized (tabs vs spaces, etc...)
Change-Id: Ia68f6589fed464bbdd76dc0812775684b2f94a58
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add socklen_t addrlen parameter to net_context_bind(),
net_context_sendto() and accept callback.
Currently the address length option is not really mandatory
as we can figure out the length from the address family.
But if we are going to support other protocol address families
it might be needed.
Change-Id: I59206465c3259050c469c5b2150221646a9a08d7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because of printk fixes in master, some of the networking
unit tests will fail in next merge.
Change-Id: I3e28aae72c0c10b402b78c0f406ecb3513b967a7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier all unit tests are with IPv6 and UDP as next header.
Modified tests with IPv6 only, IPv6 + UDP and IPv6 + IPHC next
headers.
Change-Id: Ie02cecb37e07ceae8a06a0653e2ccdfe0db91239
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We are not just checking the test build but this time
the tests are also run.
Change-Id: I7b0b24c51dfc2dc58f290cca7a593be431b8077f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For consistency as well as for helping when grepping etc.
Change-Id: Ib5e6b3369e510dd2b996f735d801c2b80291ad7f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is only meant for the new IP stack.
Change-Id: I643b0556f87423f09555274749db93397ef66c59
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reassembly IEEE 802.15.4 fragments as per it's datagram size
and datagram tag. Uncompress IP header fragment as soon as it
arrives. Size matches only after uncompression of IP header with
total length.
Support added for multiple IP packet reception. Default is one full
IP packet at a time. Cache size can be modified via Kconfig option
(NET_L2_IEEE802154_FRAGMENT_REASS_CACHE_SIZE).
Note: If you increase the size by 1 means, you should have N number
of data buffers available at max.
e.g. One full IP packet (1280 MTU) needs 15~16 data fragments means,
multiply size by same number of fragments. It requires more memory.
Offset based reassembly yet to be done (fragments can come in any order
[e.g. mesh]). Now assuming that fragments are in right order.
Change-Id: I17baee30a1087eb9ec6dc25f03ed64bbe0df2917
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for IPv6 header dispatch (without IPv6 compression
and uncompression). Only IPv6 dispatch header will be added at the
beginning of the buffer.
Change-Id: I7400a4dd115ac3b4b3d9deecd3cdb9ea292573fb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
6lowpan compression and uncompression done on original
input buffer. So no need to return paramter as net_buf *.
If the compression or uncompression fails, unref the buffer
as it cannot be used further.
Change-Id: I64f496e22b2008a91a358fff65de1b87659cd9eb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
UDP length was wrongly set and test count was hardcoded.
Change-Id: Iade959e1b8c3580b43aa2a9ff1fc10eb5a462f2f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
- Parsing a proper ACK reply
- Generating a ACK reply from a data packet requesting it, and comparing
it to a proper one.
Change-Id: I1717fedc899eafa0aa849e1e253f02cd3dc3d4fc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
First test is a unit test for frame parsing
Change-Id: I080d64a71fe4b6ff00e071a0cdee97ab9cd922d5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allocate the right amount of space for L2's context.
Change-Id: Ia2f4f4162334e9e9c26dc95230abdfde5986e052
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is related to changes in commit 7dcbbc39e7
("build: move from srctree to ZEPHYR_BASE for app include paths")
Change-Id: Ie902ed66bb74188ed54aae44e2f4289f954ec351
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a UDP packet has been received and if a watcher match
is found, then a callback is called. It is useful to have
a pointer to net_conn when calling the callback.
Change-Id: Ifa97b37c22b1fc9cac7eadfba23aa68dfd473fda
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the net_conn needs port information, use struct sockaddr
internally as it has the port numbers built in.
Change-Id: Idb1c87afa956dfe55dc8d533d867fa7845545b12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to print debug prints if debugging is not activated.
Change-Id: I42a6453b4f3e11106119561b580ebea41e56452d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When checking the IP address from network interface, return
also the used network interface.
Change-Id: If7b8385193da4cb1b469f697e219cfae3b6477dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4/6 functions follows this scheme: net_if_ipv<4/6>_<name>.
Applying that to net_if_set_gw/net_if_set_netmask which are IPv4
functions.
Change-Id: I2dcbb16ce81cfdffbfbb5cae24ad76ddf2b9919a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using macros does not let the compiler verifying about the type we are
providing, which usually give an error easier to understand.
Also, this will let the compiler deciding how to actually optimize
(inline or not) the code.
Change-Id: Iba49590b620ef0a1bd0ed5621453524fcfea747c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Disable IPv6 DAD and ND for IP address test as there is
no need to do neighbor discovery in the test. We also
would like to see network interface debugging and use
dummy L2 driver instead of ethernet one.
Change-Id: Ia9f218c8d4c13afa1482302691d2ef72af4a7b13
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The driver_api pointer was set to NULL and send() pointer
was missing which caused a crash in TX fiber.
Change-Id: I7204c975691476dd9ab2c61bfd11b7664343e47c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ARP is IPv4 only so no need to have IPv6 functionality.
Change-Id: Ie70242f5763ba4945c311898643414851f7e8660
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will verify that we can successfully insert
some space in front of the net_buf fragment chain.
Change-Id: Idf52ed56c52d66268783fb4fecd44b70fc852734
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The driver_api pointer was set to NULL which will cause
a crash in TX fiber.
Change-Id: If1c9a1e44904970f3a0019741eaaad4bf62d2c73
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The tests will make sure net_nbuf_copy() works as expected.
Change-Id: I48dc3b794c70ec4d6436feb76508952c88bbf09b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ARP unit test is not able to pass packets between fiber
and task. Because of this the test is run from fiber.
Change-Id: I1825a0abdc1b04a78de76d58425f4d2a2ce26ab7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ARP packet header contained ethernet header. This is very
confusing so separate the link layer header. Fixed also the
unit tests to run properly.
Change-Id: I8b00bde280ad9f49494766370acb2a8e9cade033
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now uses net_nbuf_ll() to point to link layer header.
Also the ARP req test passes properly.
Change-Id: If649ff19a064490bff33d03b4ce70ef11bfa7cd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using hard coded net_if, get the default network
interface using net_if_get_default() function.
Change-Id: I6248555ce57ae5196adea7baa9db325660a71255
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Right now there are tests for IP packet checksum calculation.
Change-Id: I1e9e72d01d4690728269c4484f8628350cf95729
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will check that caller is able to set IPv4 address
to a network interface and check if an address is one of the
assigned to a network interface.
Change-Id: I8aa748c40fbc02eef50ccf76d10a0057ef29021b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests have issues right now so these will be activated later.
Change-Id: Ib5549f9ed5600a20b2cfddbddcde8e7f7b297eef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Only net_receive() is using non-special value for net_buf_get_timeout
so this change is included here. Other users are using special values
which are already correctly handling ticks vs ms change.
Change-Id: Ib12d34ac5a546b36fa7b35615f082c82a256bd07
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These testcases can't build on common platforms with 16K or less of
memory.
Change-Id: Iade2aa423f42a1f174a5ebb5d183b362917f503e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Currently the net/buf test fails on quark_d2000_crb due to RAM
overflow:
region `RAM' overflowed by 2256 bytes
Change-Id: I854960a3c22c7318f5f5e9341ca7aaaf8743d30d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The net_buf_unref() API will unref all associated fragments, so it's
wrong to assume that no fragment destroy callbacks would be called
when the head buf is unreffed. Instead the right expectation is that
all fragments get unrefed as well.
Change-Id: I00530e4c1cfa5dddbfcbeab9609347873010ff4d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
ztest was not working with unified kernel and v1 APIs and not many tests are
using ztest right now, so instead of making it work with old APIs, convert it
to unified kernel completely so that new tests written using ztest would be
unified kenrel based.
Change-Id: Ibfcc7783dcb266abbd388662ba61c4b55d32b10c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a sample how to use the framework in an integration test
environment.
Change-Id: I01619fce06759ed523c8c878e8bbda6d8d87d604
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Now uses net_nbuf_ll() to point to link layer header.
Also the ARP req test passes properly.
Change-Id: If649ff19a064490bff33d03b4ce70ef11bfa7cd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using hard coded net_if, get the default network
interface using net_if_get_default() function.
Change-Id: I6248555ce57ae5196adea7baa9db325660a71255
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Right now there are tests for IP packet checksum calculation.
Change-Id: I1e9e72d01d4690728269c4484f8628350cf95729
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will check that caller is able to set IPv4 address
to a network interface and check if an address is one of the
assigned to a network interface.
Change-Id: I8aa748c40fbc02eef50ccf76d10a0057ef29021b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests have issues right now so these will be activated later.
Change-Id: Ib5549f9ed5600a20b2cfddbddcde8e7f7b297eef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
More realistic IPv6 packet creation tests created.
One test creates one big IPv6 packet and manipulates that.
Second test creates a list of IPv6 header + data fragments
and sets some user data in those fragment buffers.
Change-Id: Ic8309ff115e1d735e98c30b3c8292b0d6ffc5f42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests for checking that the net_buf fragmentation works ok.
Change-Id: I778f79bae971314b6f19c1bf00ed42e1c2128e99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add testing for fragmented buffers to the net_buf test.
Change-Id: Id6c541b86c30ac94931a7086ebb6f1312fbc34f7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When using a custom destroy callback it's the responsibility of the
callback of placing the buffer back in the free pool.
Change-Id: I5ff99c32bcb31ccc5eb0fad544d86b0c830e7051
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the more explicit net_buf_get_timeout() call where it makes sense
(e.g. where we always want to wait or never want to wait).
Change-Id: Id1eabe0ad2f9fa79f7be39e51fefa5161f9cc550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Many test configs are the same, remove complexity and duplication by
using just one kernel config where applicable.
This removes the usage of ARCH which is a remnant from the days where
we had to specify the architecture of the board, the architecture is now
part of Kconfig and determined basded on the board configuration.
This will also make it easy adding new architectures to test cases without
having to add an architecture specific config file when it is actually not
needed, for example now that we will enable micro-kernel support on ARC.
Jira: ZEP-238
Change-Id: I143fa3c4629c58329cfeb0c761c7a896fc1ef63a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test should be under tests and is not a sample.
Change-Id: Ibb42207f72554516a650625a2cf4cc9cb7a0b021
Signed-off-by: Anas Nashif <anas.nashif@intel.com>