Fix test to not assume anymore that:
- credential iteration buffer has the same pointer as the buffer
used in credential_add, now compare the length & content.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Decouple the zephyr/net/socketcan.h and zephyr/drivers/can.h header files
by moving the SocketCAN utilities to their own header.
This is preparation for including the SocketCAN types defined in
socketcan.h in a native posix (Linux) SocketCAN driver context without name
clashes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
SocketCAN does not support CAN-FD data lengths of up to 64 bytes
payload. Decouple the maximum supported SocketCAN data length from the
maximum supported CAN controller data length.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN header from socket_can.h to socketcan.h to better
match the naming of the functionality.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN utility functions to reflect the new naming of the CAN
controller API and SocketCAN API data types.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN data types to "socketcan_*" in preparation of renaming
the low-level CAN controller API data types.
This breaks the naming compatibility with the similar SocketCAN data types
from the Linux kernel, but Zephyr and Linux SocketCAN are not 100%
compatible anyways (only the structure fields are compatible, extended
functionality such filtering, error reporting etc. are not).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the SocketCAN tests from tests/drivers/can/utilities to
tests/net/socket/can to match the location of the code under test.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
There are several test cases that create fake ethernet devices and
expect the fake device to be the only ethernet device enabled. Some
tests handle this be explicitly disabling actual ethernet drivers,
but this doesn't scale well.
Change drivers/ethernet/Kconfig to utilze a menuconfig option that
wraps all the drivers. This allows us for those test cases that
don't want any actual ethernet drivers to disable them with a
simple CONFIG_ETH_DRIVER=n.
Note, the fake ethernet devices utilize CONFIG_ETH_INIT_PRIORITY so
we have it outside of the 'if ETH_DRIVER' block.
Signed-off-by: Kumar Gala <galak@kernel.org>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
All IEEE 802.15.4 tests use internal fake devices, so use native_posix
platform to run them as they are not meant to test IEEE 802.15.4 on
hardware.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Disable unstable tests cases for mps2_an385, which fail sporadically
due to timer stability issues on that platform (see #48608).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Loosen some timing constraints in order to hack arond spurious
failures in upstream Zephyr's CI while working on an unrelated task.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
6LoWPAN fragmentation is not related to IEEE 802.15.4 proper but is just
part of its IPv6-specific L3-adaptation layer. To make this more obvious
we rename all resources related to 6LoWPAN fragmentation.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This change decouples the IEEE 802.15.4 (L2) layer from all IPv6 (L3)
concerns.
Applications may now choose to set CONFIG_NET_6LO=n and
CONFIG_NET_L2_IEEE802154=y at the same time.
Setting CONFIG_NET_6LO=n will build a vanilla IEEE 802.15.4-2006 specs
compliant L2 layer without any reference to 6LoWPAN or IPv6. This allows
application developers to design custom non-IP protocols on top of
IEEE 802.15.4-2006 and thereby makes the L2 layer much more re-usable.
Fixes#48585.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_NRF5_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME.
All SoC files have been updated with the addition of an ieee802154 node
(disabled and only on those SoCs that define ieee802154-supported. The
peripheral has been enabled in the nRF52840DK board (used for testing
ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_KW41Z_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
KW41Z files have been updated with the addition of radio and an
ieee802154 nodes The peripheral has been enabled in the frdm_k41z board
(used for testing ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The crypto driver is used internally, so there's no real need to expose
its name as a Kconfig option. Just drop it in favor of a plain string
with the same previous value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC1200_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
In this case, the driver already had bindings, however, it was still
using NET_DEVICE_INIT.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit disables the `net.socket.tcp.preempt` test on the
`mps2_an385` platform because it fails very frequently due to the
system timer stability issues.
For more details, refer to the issue zephyrproject-rtos/zephyr#48608.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It can happen that two similar stacks enter a retransmission cycle
due to a packet collision. If the transmission timeout is the same
both stacks will retry at the same moment resulting in another
collision.
By introducing a randomized retry timeout, the chance of
a second collision is reduced and it reduces furter the more
retransmissions occur.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Apply an exponentially increasing wait time between tcp retries. This
is a good balance between reacting fast to single lost packets and reduce
the network load when an outage takes a little longer. It also allows the
connection to survive a longer interruption with less retransmissions.
Update the test to accommodate for the increased socket closure timeout
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Previously the test waited for the worst case time till all sockets
where closed, this causes the test to wait for a long unnecessary time.
Secondly it does not ensure the sockets are actually closed before
starting the next tests.
For tests that are not conducted in user mode, wait until all the contexts
are close for a maximum time. If the contexts are not closed in time raise
an explicit assertion.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Move af_packet_ipproto_raw tests to use new ztest API
TEST=twister -T tests/net/socket/af_packet_ipproto_raw/
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
Move driver to use {NET_}DEVICE_DT_INST_DEFINE. This lets us
remove the IEEE802154_CC2520_DRV_NAME Kconfig symobl.
We also update the ieee802154 build_all test to actually enable
the CC2520 driver.
Signed-off-by: Kumar Gala <galak@kernel.org>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
COAP_DEFAULT_MAX_RETRANSMIT and COAP_DEFAULT_ACK_RANDOM_FACTOR
should be configurable to determine the max transmission
timeout of a CoAP packet.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Increase threads stack sizes from 2k to 3k, so that it will pass without
stack overflow on qemu_x86 platform when SHA384 support will be reenabled.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Integrated updated JSON library to LwM2M 1.0 JSON.
Removed Old Json format default choice.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Checks that taking a shallow of a packet does not leak buffers after the
packet and its clone are unreffed.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Datagrams should either be fully sent or not sent at all if networking
buffers or network interface MTU does not allow that.
Verify that by trying to send MTU+1 bytes in case of IPv4 (as IP level
fragmentation is not implemented) and IPv6 (should fail when IPv6
fragmentation support is not enabled and succeed otherwise). In case of
IPv6 try to send "total number of network buffers + 1", so that even with
IPv6 fragmentation enabled requested datagram will not be sent. In all
tested cases when datagram is too big, check that ENOMEM error code is set.
NOTE: Tested behavior is not 100% compliant with Linux, as on Linux
EMSGSIZE error code is set when trying to send datagram bigger than MTU,
when manually disabling IP fragmentation (by setting IP_MTU_DISCOVER to
IP_PMTUDISC_DO). However, it is not trivial to implement such
behavior (EMSGSIZE error due to MTU) now and there is always a risk of
running out of buffers (and getting ENOMEM), so for now implemented tests
just assume the latter case to always happen.
Add 3rd testcase, which enables IPv6 fragmentation support, so that UDP
socket behavior can be tested in that context.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
A reproducible case to the behavior when during a connection
the link gets broken and all data is lost, the TCP connection
should properly terminate.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Fix the existing DGRAM packet socket test. The test will now specify
LL destination address and protocol type. Also, update the fake ethernet
device send handler, so that it sets the packet network interface
corretly, so that the packet is not rejected at Ethernet L2.
Additionally, add two additional test cases verifying datagram packet
sockets. Fist test will exchange packet between RAW and DGRAM socket,
making sure that net stack forwards/removes L2 header correctly. The
second test verifies that it's possible to recieve a packet on both RAW
and DGRAM socket, making sure the received data has correct format.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The net cases failed to run on sam_e70b_xplained
platform because failed to reserve data net buffers,so
adjusting the memory buffer to fix this.
Fixes#42857
Signed-off-by: NingX Zhao <ningx.zhao@intel.com>
Datagrams (for DTLS connection) need to be sent using single API call to
mbedTLS and should not result in sending each fragment in a separate
datagram. Check if that is the case, so allow only single fragment data to
be sent and expect an error when multiple fragments were passed to
sendmsg().
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
When there is no response from the server, a client side close
is obstructed, it should terminate and clean the context. This
tests breaks the connection after the accept and validates
this behavior.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The test suite is failing on qemu_cotext_a9 due to stack overflow.
Apparently this issue can also be observed on main after enabling
STACK_SENTINEL, however the test only started crashing after TCP
changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove NET_TCP_BACKLOG_SIZE from KConfig and from test,
because it's not present anymore in current version of TCP stack.
Signed-off-by: Andrey Dodonov <Andrey.Dodonov@endress.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The close function on a TCP socket can return before the complete
socket has been closed, as there might be packets still in flight.
Add a wait at the end of the test so we are sure all sockets have
been closed before the next test starts.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The close function on a TCP socket can return before the complete
socket has been closed, as there might be packets still in flight.
Modify the test to wait briefly (less then the retransmit time), before
counting the number of still open net_contexts. This makes the test
outcome not dependent on the scheduling order of the different tasks.
Secondly the test actually checks the number of open contexts to be zero
so there is no need to wait for any open contexts to still close.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
When there is no response from the server, a client side connect
should return a ETIMEOUT. This tests breaks the connection and validates
this behavior.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
DAD timeout was wrongly checking the reply order. The code will always
assign sequentially the reply to 0-2 with the current uptime. This means
that we will always have dad[0] < dad[1] < dad[2]. Check it is useless.
Instead, let just check if we got all replies.
The test checking the time between the first and last request is to
fragile. It is testing a constant independently of the tested platform
failing in several of them. Just remove it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add unit tests for socket dispatcher module. The tests verify that:
* a socket is automatically dispatched to a regular socket on any
first socket call, if the socket was not bound already before
(according to the default priority rules)
* a socket is correctly dispatched to an offloaded/native socket
implementation after a SO_BINDTODEVICE call
* a socket is correctly dispatched to a native TLS socket, with an
underlying native/offloaded socket, if TLS_NATIVE and SO_BINDOTODEVICE
socket options are used
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A reproducible case to see what happens when the TCP stack runs out
of buffers. It transfers a block, bigger then the number of buffers
available.
Also test by introducing packet loss in the loopback driver.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Since the loopback driver makes use of the RX packet pool now, adjust
the packet count for the test.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The ARRAY_SIZE macro uses sizeof and thus the return
type should be an unsigned value. size_t is typically
the type used for sizeof and fits well for the
ARRAY_SIZE macro as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Even though bash is commonly available as /bin/bash there are
exceptions (e.g NixOS). This commit allow the use of the scripts in my
environment and is generic.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
In case an individual resource is being discovered, the LwM2M client
should not only fill the attributes assinged at the resource level, but
also the ones inherited from the object and object instance levels.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The device already has a DT compatible (and uses DT properties).
Instantiate the device using the DT-based macros and remove hardcoded
name.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Update test to ensure that any file can be tranfered,
not only files that are aligned with the packet size.
Signed-off-by: Efrain Calderon <efrain.calderon@aquarobur.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for the gateway object [EXPERIMENTAL] used by the
MG100, BT510, and BT610 LwM2M demo.
Signed-off-by: Andrew Hedin <andrew.hedin@lairdconnect.com>
In order to align with macros used to obtain a device reference (e.g.
DEVICE_DT_GET), align the PM macros to use "GET" instead of "REF". This
change should have low impact since no official release has gone out yet
with the "REF" macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This provides the infrastructure to create network packet filter rules
and to apply them to the RX and TX packet paths. Rules are made of
simple condition tests that can be linked together, creating a facility
similarly to the Linux iptables functionality.
A couple of generic and Ethernet-specific condition tests are also
provided.
Additional tests can be easily created on top of this.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Verify that Route Info data received in Router Advertisment creates a
route and correctly populates the net_route_entry structure.
Additionally, extend the MTU on the test interface, to accomodate the
extended Router Advertisement message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement a concept of Route Preference, as specified in RFC 4191. The
Zephyr host will prefer routes with higher preference, if they lead to
the same prefix through different neighbours.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Arduino compatible boards should have a working UART on pin 0 & 1.
On frdm_k64f this is handled by uart3
Unfortunately pinmuxing of uart3 was destroyed when enabling NETWORKING,
because the uart3 RX/TX pins was reconfigured for 1588 timers.
1588 timers are enabled by the enet child node, ptp which by some reason
is enabled by default.
1588 timers aren't needed in most cases when ethernet is being used,
so this fix ensures ptp is by default disabled. Likewise pinmuxing of
the 1588 timer functionality is now dependant of ptp being active
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
Add some basic custom 802154 L2 tests, verifying that a custom L2 can be
integrated with Zephyr properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace unpacked in6_addr structures with raw buffers in packed icmpv6
structs, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr structures with raw buffers in net_ipv4_hdr
struct, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr/in6_addr structures with raw buffers in
net_arp_hdr struct, to prevent compiler warnings about unaligned
access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Since drivers implement a callback based on action and not the state,
we should be using the API based on the action instead of the one based
on the state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
TCP2 is no longer needed as it is the unique implementation since the
legacy one has been removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous timeouts values were done when local TCP replies wourd occur
within sender's thread. This was a known behavior: no context switch,
shorter timings for sending packets (locally only) thus shorter
timeouts.
Such behavior changed when local replies had to go through TCP's work
queue. See commit 798588e709Fixes#40129
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Client thread might run before the server gets to put itself on accept.
Leading to the server waiting forever.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
TCP work queue is of higher priority so k_yield should do the trick, and
the test will not be affected by any timing.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to the previous change on when to send TCP packet on local IP, pkt
may be held in a queue which is to run on a k_work. This changes the
scheduling, and due to that one of the test is failing to allocate a
RX net_pkt at the time it wants to. (previous TCP connection is not yet
fully closed and still own PKT that new connection cannot get then).
Of course all those waiting paquets require buffers so raising them.
It was verified that there is no leak, adding net_pkt_print() at
tcp_conn_unref() shows that when all tcp connection are finally unrefed:
all net_pkt get freed as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The PM callback is no longer referenced as "pm_control" but
"pm_action_cb", so reflect this new naming on the callbacks.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
LwM2M was not covered by networking build all test, leaving an opening
for possible regression in modules that are not enabled by default in
the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some net_pkt functions in `test_net_pkt_headroom_copy()` did not have
their return values verified, causing coverity complains.
CID: 240661
Fixes#39841
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When creating a socket, all of the registered socket implementation are
processed in a sequence, allowing to find appropriate socket
implementation for specified family/type/protocol. So far however,
the order of processing was not clearly defined, leaving ambiguity if
multiple implmentations supported the same set of parameters.
Fix this, by registering socket priority along with implementation. This
makes the processing order of particular socket implementations
explicit, giving more flexibility to the user, for example when it's
neeed to prioritze one implementation over another if they support the
same set of parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
ptp_clock_test was failing when trying to access the ptp clock from user
mode. This was due to an arbitrary initialization priority between the
virtual PTP clock devices created by the ptp clocking test and the
physical PTP clock on the frdm_k64f board. Since the ptp test
initializes the virtual clock with the same device name as the physical
clock, if the physical clock was initialized first this test would
incorrectly reference the physical device during testing, instead of the
virtual one.
This fix simply defines the virtual ptp clock with a custom name, so
that the test will always locate the correct ptp clock.
Fixes#38731
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This is accomplished with 3 fake ethernet interfaces hooked to a
common bridge, simulating incoming packets and controlling each
interface's transmission product.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Introduce a helper function for being able to remove any arbitrary
length from tail of packet. This is handy in cases when removing
unneeded data, like CRC once it was verified.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The test ocassionally fails on the mps2_an385 platform in the CI, due
to strict timing requirements of the test.
Relax the timeouts and acceptable fuzz time a bit, to prevent the
failures in the future.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Convert CoAP unit tests to ztest API.
Additionally, replace dynamic memory allocation with a static one, to
prevent memory leaks with ztest.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the test is run in a board that has a network interface
enabled, then the tests might select and use wrong network interface
that is needed for the test. So this commit makes sure that
we always use the simulated network interface for the
Ethernet management tests.
Fixes#36419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add unit tests which verifies that poll() function is signalled
correctly if called after data was written/read to/from a socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Network test cases are designed for emulated
environments so add platform_allowed filter to
only allow qemu platforms.
Fixes: #36418
Signed-off-by: David Leach <david.leach@nxp.com>
Simple tests that verify that TXTIME parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbu parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simple tests that verify that Qbv parameters can be passed from
application code into the driver and vice versa.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The timings were too tight for TLS tests executing on nRF52840 with
hardware entropy source enabled. Increase the timings to make tests
pass.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixed mutli-IP DNS resolution as previously the same IP address was
used to populate all AI entries and added DNS_RESOLVER_AI_MAX_ENTRIES
config entry to define max number of IP addresses per DNS name to be
handled.
Signed-off-by: Ievgen Glinchuk <john.iceblink@gmail.com>
This commit increases the newlib heap size to 2048, which is the
recommended minimum required to ensure proper operation of the newlib
nano used by test (see #35799).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
If the tests/net/socket/getaddrinfo is run in a board that has
Ethernet controller, then it is possible that it will interfere
the test if the Ethernet cable is connected. As the test only
needs loopback support to run, disable the Ethernet as it is
not needed by the test.
Fixes#34923
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The network tests were expecting that network interfaces
are in certain order. As we cannot guarantee that, refactor
the tests like this:
* if test is using DUMMY L2 driver, then disable Ethernet L2
and fetch only DUMMY L2 instead of default interface
* if test is using Ethernet L2 driver, then make sure that the
test is using the Ethernet interface specified in the test
instead of the one provided by the DUT
Fixes#34505
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The use of device_pm_control_nop is deprecated so remove it
from the test as it will give warning in CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests for just introduced dns_resolve_reconfigure() API, which
allows to replace old DNS servers with new ones.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was no dedicated mechanism for replacing DNS servers with
new list. Add dns_resolve_reconfigure() API that allows to achieve that
in a thread-safe manner.
Introduce 3rd state in DNS context lifetime by converting from 'bool
is_used' to 'enum dns_resolve_context_state state'. This new
DEACTIVATING state allows to mark a DNS context as busy and safely close
context without holding lock. Closing DNS context with released lock
prevents deadlock in case net_context_close() has to synchronize with a
separate thread executing handler passed to net_context_recv() (which is
the case for example with ESP-AT WiFi driver).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tests are designed to run over the DUMMY interface but when run on
hardware, net_if_get_default() can return the actual hardware
interface.
Fixes: #31969
Signed-off-by: David Leach <david.leach@nxp.com>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This work is similar to one performed for ./net/ptp/clock/ test.
However, there is one notable extension - the check in iface_cb()
callback also checks for virtual interfaces defined in
subsys/net/l2/virtual/ipip/ipip.c. Those 'virtual' interfaces are
required for this test to be run.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The tests/net/ipv6/src/main.c uses net_if_get_default() to get the
interface for testing. This is problematic when board introduces its own
linker script, which places board's network interface on the "default"
position - i.e. the first one.
To fix this issue - the lookup for network device defined for this test
is used instead.
Moreover, interfaces rename has been performed in a manner, which would
allow working with 'eth_native_posix' interface being added as linker
object when drivers/ethernet/eth_native_posix.c file is linked for
./zephyr/tests/net/ipv6 test on 'native_posix' board.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This change is required to allow correct tests operation after changing
the definition of linker script placement rule (to be more strict and
using the device name).
The struct net_if interfaces have been renamed to preserve correct
order.
Moreover, the iface_cb() function now immediately returns for
interfaces, which are not supposed to be used in this tests - for
example ones already defined on board on which the test is run.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The struct net_if object placement in linker 'net_if_area' section
now depends on the order of ETH_NET_DEVICE_INIT() macros in the source
code (for the same object file - like app/libapp.a(main.c.obj)).
Currently the 'eth_offloading_enabled_test' device is placed first,
followed by 'eth_offloading_disabled_test'.
This placement is important when one would like to access those
interfaces with net_if_get_default() function.
After the rename the order is explicit, when we append the device name
to the ._net_if.static.<dev name> object in linker's net_if_area.
The code now works as all struct net_if interfaces are placed as
'._net_if.static.net_if' objects.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The struct net_if object placement in linker 'net_if_area' section
now depends on the order of liked libraries (like
app/libapp.a(main.c.obj). As a result interfaces defined in testing
applications are placed first in the 'net_if_area' section.
Problem arises when board has other interfaces, which are placed on the
first (i.e. default) position. In this case the test just fails as wrong
network interface is used.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implement SO_BINDTODEVICE socket option which allows to bind an open
socket to a particular network interface. Once bound, the socket will
only send and receive packets through that interface.
For the TX path, simply avoid overwriting the interface pointer by
net_context_bind() in case it's already bound to an interface with an
option. For the RX path, drop the packet in case the connection handler
detects that the net_context associated with that connection is bound to
a different interface that the packet origin interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
CMSIS_DSP and net_socket tests are either too
slow or too large for this platform, also drop
bluetooth for test
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch to the new API for delayed work related to DNS queries.
In the previous solution it was assumed that the work item could be
immediately cancelled at the point the query slot was released. This
is not true. We need a secondary condition to record the fact that
the query was completed while the work item was still pending, and an
additional check to detect when the work item completed and the slot
reclaimed.
Also annotate functions to indicate when they require the lock on
query content to be held, add some helpers that abstract core
operations like invoking a callback or releasing a query slot, and fix
some more cases where query slot content was accessed outside of the
new lock infrastructure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The previous implementation of process_dns() handler did not
properly catch how many queries we sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This platform has a tiny handful of remaining tests that fail. We
will track them as issues, but let's exclude them from integration
testing to allow full runs to complete. Often a hung device in one
test will break an entire twister run.
Tests with known (and tracked) failures:
samples/application_development/external_lib
samples/posix/eventfd
samples/userspace/hello_world_user
tests/kernel/fatal/message_capture
tests/net/socket/socketpair
tests/portability/cmsis_rtos_v2
These tests never fail in isolated testing, but are reliable timeouts
when run in sequence in a big twister run. It's possible that the bug
here may be in twister or the flash/serial scripts:
tests/crypto/tinycrypt
tests/subsys/logging/log_immediate
tests/subsys/logging/log_output
See: #32836
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
CONFIG_KERNEL_COHERENCE forbids synchronized data on the stack: no
spinlocks, IPC primitives, or things that contain them. Application
code obviously doesn't have to follow these inconvenient rules, but
our test code needs to run on platforms with incoherent stack memory.
Make these things static.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Instead of hardcoding the network interface value, use
net_if_ipv6_select_src_iface() so that proper network interface
gets used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The timeout might take more than 10ms in a heavily loaded system,
so increase the timeout to 20ms.
For example this is often seen for mps2_an385 platform.
Assertion failed at \
WEST_TOPDIR/zephyr/tests/net/socket/select/src/main.c:101: \
test_select: (tstamp <= FUZZ is false)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This returns the available contingous space in the packet starting from
the current cursor position.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This commit fixes some edge cases when using net_bufs with reserved
bytes (headroom) as fragments of a net_pkt.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
When operating on a net_pkt using the cursor functionality, reserved
bytes (headroom) are currently not respected.
This commit adds test cases exposing this problem. Fix will be
introduced in a later commit.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.
Fixes#32375
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
New test that verifies CoAP Acknowledgement initialization function
that create a response packet for given request. Both request and
expected response packets are given in the test as PDU.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
../src/main.c:662:13: warning: cast from pointer to integer of different
size [-Wpointer-to-int-cast]
662 | int sock = (int)p1;
| ^
../src/main.c: In function 'spawn_child':
../src/main.c:671:4: warning: cast to pointer from integer of different
size [-Wint-to-pointer-cast]
671 | (void *)sock, NULL, NULL, 0, K_USER,
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Introduce retransmission counter to the coap_pending structure. This
allows to simplify the retransmission logic and allows to keep track of
the number of remaining retranmissions.
Additionally, extend the `coap_pending_init()` function with `retries`
parameter, which allows to set the retransmission count individually for
each confirmable transaction.
Fixes#28117
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The main stack size is too small by default in many boards.
Increase the size to 1024 bytes which works fine with
sam_e70_xplained board.
Fixes#31342
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The main stack size is too small by default in many boards.
Increase the size to 1024 bytes which works fine with
sam_e70_xplained board.
Fixes#31343
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The af_packet test has been augmented to check if sent UDP packet from
one port to another (via net interface) is also passed to open SOCK_RAW
connection.
The test_packet_sockets() function has been reused to setup the SOCK_RAW
sockets for this test.
It is important to note that the packet is passed to receive part of net
stack after being sent.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The setup_socket() function calls socket() with proto changed to network
order. In this case functions with zsock_* prefix are called instead of
zpacket_*. The problem is with 'packet_is_supported()' method from
sockets_packet.c, which returns false when ETH_P_ALL proto is converted
with htons().
This patch fixes this issue by removing the htons() call.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Suggested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a check to stop a multicast address to be registered multiple times.
This can happen if the application is using net_if_ipv6_maddr_add()
directly.
Tested on the existing bluetooth/ipsp sample:
<wrn> net_if: Multicast address ff02::1 is is already registered.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Make sure that received and out-of-order TCP segments are queued
until we receive proper segments.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_timeout structure is documented to exist because of behavior
that is no longer true, i.e. that `k_delayed_work_submit()` supports
only delays up to INT32_MAX milliseconds. Nonetheless, use of 32-bit
timestamps within the work handlers mean the restriction is still
present.
This infrastructure is currently used for two timers with long
durations:
* address for IPv6 addresses
* prefix for IPv6 prefixes
The handling of rollover was subtly different between these: address
wraps reset the start time while prefix wraps did not.
The calculation of remaining time in ipv6_nbr was incorrect when the
original requested time in seconds was a multiple of
NET_TIMEOUT_MAX_VALUE: the remainder value would be zero while the
wrap counter was positive, causing the calculation to indicate no time
remained.
The maximum value was set to allow a 100 ms latency between elapse of
the deadline and assessment of a given timer, but detection of
rollover assumed that the captured time in the work handler was
precisely the expected deadline, which is unlikely to be true. Use of
the shared system work queue also risks observed latency exceeding 100
ms. These calculations could produce delays to next event that
exceeded the maximum delay, which introduced special cases.
Refactor so all operations that use this structure are encapsulated
into API that is documented and has a full-coverage unit test. Switch
to the standard mechanism of detecting completed deadlines by
calculating the signed difference between the deadline and the current
time, which eliminates some special cases.
Uniformly rely on the scanning the set of timers to determine the next
deadline, rather than assuming that the most recent update is always
next.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add test cases for checking the previously untested `net_buf_push_*`
functions in terms of the new `net_buf_remove_*` functions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This patch adds a test for the network address resolver module
that verifies resolving literal IPv6 addresses.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Convert tests to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On userspace platforms, this test needs a little bit of kernel heap.
The old mem_pool number was specified without metadata overhead
(i.e. it reflected 128 bytes of actual data available and the metadata
was stored silently somewhere else), where the new heap specifies the
size of the contiguous buffer in memory that stores both data and
chunk headers, etc...
Increase to 256 bytes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The socket pairs created for this test when run under user mode are
accessible only from the thread that created them. Although it is
possible for that thread to grant access to another thread:
* there does not appear to be a way to do that when referencing a
descriptor rather than a pointer to a kernel object;
* there is no public API that supports granting the object rights to a
user thread that animates a work queue.
Until these gaps are addressed use the system work queue run
supervisor-mode threads to verify the asynchronous behavior of the
API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adjust the test thread priority so that the test / IP stack
has a chance to run and the test passes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A socket which didn't undergo completed connect() or accept() calls
should react with ENOTCONN to recv() call. This test checks both
a freshly created socket ("client" one) and a socket in LISTEN
state ("server").
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Represent IPv6 addresses as groups of 16-bit values in test vectors.
This commit corrects the following two test issues on big endian
systems:
START - test_ipv6_pton_1
Failed to verify ff08::
against 0:ff08::
START - test_ipv6_ntop_1
Failed to verify 0:ff08::
against ff08::
Makes the following tests pass on qemu_leon3:
- net.util
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Modified net_ipv4_is_addr_mcast() to not wrongly classify an IPv4
broadcast address as a multicast address.
Signed-off-by: Oliver Hitz <oliver@net-track.ch>
The L4 connected/disconnected events are usually used to detect
when the application is connected to the network. Unfortunately
if the device has also a static address, then the connected event
might be created (for the static address) even if DHCPv4 is not
ready yet and application would not be able to connect (yet) to the
network. In order to allow the application to fine tune the network
connection creation, generate start, bound and stop events for DHCPv4.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Lowering the connection timeout in order to avoid spin lock assert
in frdm_k64f device. This error was seen with this device
ASSERTION FAIL [z_spin_lock_valid(l)] @ zephyr/include/spinlock.h:92
Recursive spinlock 0x20003590
Fixes#28602
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
APP_TX_RX_TIMEOUT and APP_NET_INIT_TIMEOUT were not used in any way
in the sample and test apps.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The test was failing when run in sam_e70_xplained board.
Because the test does not use any network packet TX/RX functionality,
disable Ethernet support so that when run in a board with network
capabilities, the network interface is not created.
Fixes#28000
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the recvfrom() in the test returns EAGAIN, try again in order
to make sure that we have really received the data.
Fixes#27963
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add some tests for testing AF_PACKET and SOCK_DGRAM type
sockets. These are sockets where Ethernet header is automatically
added, caller just needs to provide upper stack header.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added additonal checks in net_ipv6_input to ensure that multicasts
are only passed to the upper layer if the originating interface
actually joined the destination multicast group.
Signed-off-by: Philip Serbin <philip.serbin@lemonbeat.com>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
Only one LOG_MODULE_REGISTER() is allowed in the files that are
linked together. The other files must use LOG_MODULE_DECLARE()
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP2 uses slightly more network packets and connections in the
socket poll test, so increase the values for the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The tests were failing when run on those boards that had
physical Ethernet support. In that case there were three Ethernet
interfaces, two simulated ones for testing, and the third one
was provided by the board. This extra Ethernet interface caused
the test to fail as the test was sending data to wrong interface.
Fixes#27238Fixes#26568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modify the tests so that they verify that only allowed thread
is able to modify network interface data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since the peer isn't replying on SYN resend, update the
test to check for failed connect.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Since the connect is now blocking, update the timeout values
for the tests to pass.
In case of resend test, set the timeout to 1000ms to account
for the retransmission.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This is a test, and the function is called with K_FOREVER, so it's not
supposed to fail.
Fixes: #25735
CID: 210582
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This tests make sure that the right source address is chosen during
the mesh multicasting.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This socket is shared by all the test cases which run in
different threads. Just make it a global object here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
A quick test on a dummy device that:
- opens a socket (success)
- sends data (success)
- suspends (success)
- suspends (failure)
- sends data (failure)
- resumes (success)
- resumes (failure)
- sends data (success)
This permits to show that PM states are properly handled in network
stack.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For success cases, the net_pkt is handled by the IP stack
so no need to free the net_pkt. The double free is not causing
any issues as the net_pkt code will just ignore the request but
we should avoid doing it because of error prints that are printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Kernel objects were being directly accessed without previously
calling k_thread_access_grant().
This change allows each test that requires an asynchronous
event to send it to a common work queue with correct
permissions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Tests should always start with test_, otherwise detection of subtests
will not work through sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use DT_INST_SPI_DEV_HAS_CS_GPIOS() in drivers to determine if we should
utilize CS_GPIO base SPI chipselect handling. This allows us to remove
Kconfig option for this feature.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit removes the redundant `LOG` and `LOG_IMMEDIATE` selections
in `prj.conf`, since the `TEST_LOGGING_DEFAULTS`, which is enabled by
default for all tests, selects `LOG` and `LOG_MINIMAL`.
This effectively allows the test to run with the default test logging
policy, set by the testing subsystem.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit renames all local definitions with the name `PORT` in the
net tests, in order to prevent name conflict with certain HALs
(notably, Atmel SAM E5x HAL).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
No point to change the throw_sleep to k_timeout_t because we
are calculating the timeout beforehand which can lead to
unexpected results if using k_timeout_t.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to know which test fails to semaphore timeout so
add line number of the failing test to assert print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_context API will change, the s32_t timeout parameter
will be changed to k_timeout_t. All the Zephyr users of this API will
be changed in subsequent commits. This is internal Zephyr API only,
so the API is not deprecated etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use the appropriate K_SECONDS() or K_MSEC() macros to pass a timeout to
k_sleep() and other kernel APIs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Earlier tests were not going through ICMP echo
core stack handlers. Due to that unable to verify
echo reply. Tests are improved to verify replies.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using MQTT_UTF8_LITERAL() allows to reduce code and make it less error
prone, since utf8 length is calculated automatically by the macro.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add a simple test to verify that the bind() can be called multiple
times if AF_PACKET is set and there are multiple network interfaces
in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test case for IPv4 header options was added but
CONFIG_NET_IPV4_HDR_OPTIONS option was not enabled.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Wrong option length in IPv4 header options testcase
added. This should cover malformed packet case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Added simple test case for net_pkt_clone() to verify
cursor position after cloning.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Switch to `NET_SOCKET_REGISTER` mechanism over the offloaded API
registration.
Including the following fixes from the review:
* The fd returned by the socket accept call needs to be finalized,
similar to how it is done for socket creation.
* sl_RecvFrom() in TI SimpleLink Host driver does not support NULL
pointers for 'from' address and address length, and sl_SendTo() does
not ignore the destination address when in connection mode, so passing
NULL would cause a failure. These issues have been reported to TI
(CC3X20SDK-1970, CC3X20SDK-1971).
Let's use sl_Recv and sl_Send to implement recvfrom/sendto in the case
of NULL addresses.
* simplelink_poll() should not process negative file descriptors in the
fds array after sl_Selecti() returns. A negative fd value indicates
that the entry is invalid and should be ignored.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It's no longer needed to call `mqtt_input` after `mqtt_disconnect`.
Doing this will actually return an error as the MQTT connection is no
longer active after calling `mqtt_disconnect`.
Fixes#22360
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The reworked 6lowpan implementation asserts when no LL source or
destination address is set on a packet. This caused the fragmentation
tests to fail before they completed.
Fix the issue, by setting a dummy address on a packet during a setup.
Fixes#19761
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
NET_INIT_PRIO (defined in subsys/net/ip/Kconfig) is currently hardcoded
to 90 (it's not set via any Kconfig.defconfig files either). Maybe it
could be given a prompt or be removed, but just remove the assignment
for now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
The prompt was removed in commit 2ec7e70509 ("net: routing: Hide routing
option temporarily").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is selected by IEEE802154_RAW_MODE, defined in
drivers/ieee802154/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is enabled through being selected by IEEE802154_CC1200 and
IEEE802154_RF2XX.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is already enabled indirectly through being selected by
NET_L2_IEEE802154_RFD, which is enabled in the configuration file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
(There doesn't seem to be any way to enable this symbol, because it's
not being select'ed either.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix ASSERTs that appears when enabling asserts in net buf.
Asserts are:
- Pulling from net buf before any data has been added.
- Pulling more data than has been allocated for the buf.
Fix warning:
W: You have 1 IPv4 net_if addresses but 2 network interfaces
W: Consider increasing CONFIG_NET_IF_MAX_IPV4_COUNT value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix byteorder test writing past the data pointer. This would otherwise
have been caught by the assert, but net buf asserts were not enabled in
the test. Reset the buffer between different tests to re-use the same
16-byte buffer.
Turning on asserts gives:
starting test - net_buf_test_byte_order
ASSERTION FAIL [net_buf_simple_tailroom(buf) >= len] @
ZEPHYR_BASE/subsys/net/buf.c:775
E: r0/a1: 0x00000004 r1/a2: 0x00000307 r2/a3: 0x00000000
E: r3/a4: 0x00006d79 r12/ip: 0x00000000 r14/lr: 0x000028ad
E: xpsr: 0x61000000
E: Faulting instruction address (r15/pc): 0x000050b0
E: >>> ZEPHYR FATAL ERROR 4: Kernel panic on CPU 0
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix ASSERTs that appears when enabling asserts in net buf when adding
more data than has been allocated for the buf.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Also remove the assignments to the other NET_GPTP_CLOCK_ACCURACY_*
symbols. They are all in the same choice (in
subsys/net/l2/ethernet/gptp/Kconfig), meaning only one of them can be
enabled, and the choice already defaults to
NET_GPTP_CLOCK_ACCURACY_UNKNOWN, which is the symbol assigned last.
The symbol assigned last becomes the choice selection when multiple
symbols in a choice are assigned to. The other choice symbols still
become n. Dependencies override assignments.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The code tried to use the allocated pkt ptr before checking for
NULL value.
Fixes#21699
Coverity-CID: 206608
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test name did not reflect the purpose of the test.
Also add "poll" tag so that we can more easily launch just
this test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This adds tests for reading and writing 16, 24, 32, 48 and 64 bits in
different byte orders.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix unintended sign extension (SIGN_EXTENSION).
The result of "coap_block_size_to_bytes() * (iter - 1)"
extending the sign type.
Issue is the conversion of iter from u8_t to int because it's
an unsigned operand in an binary subtraction with 1 which is
a signed operand with higher conversion rank (int).
Fixes#20880Fixes#20881Fixes#20882Fixes#20883
Coverity CID :205780
Coverity CID :205786
Coverity CID :205806
Coverity CID :205808
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If the ICMPv6 test is run in real hw, we need a bit more buffers
to pass the test.
Fixes#19915
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Stack size might be too small when running the test in real
board like sam-e70.
Fixes#19914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After run Sanitycheck script I found out that
some test cases have a same test case name
in the test result .xml file.
For boards mimxrt1050_evk, qemu_x86, sam_e70_xplained
in .xml files that cases were dublicated.
Problem happened only with cases net.dns.no_ipv6.init
and net.dns.init. Only that cases were dublicated.
To solve it, I decided to change test cases names for the dns tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This symbol is not user-configurable (has no prompt), so assignments in
prj.conf have no effect on it.
(It has no defaults either, and isn't selected/implied, so nothing in
vanilla Zephyr will ever enable it.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The default main stack is too small for some boards so increasing
it to 2048. The issue was seen with sam_e70_xplained.
Fixes#19762
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The test creates two network interfaces, but does not set MAC
address of one of them correctly (MAC address is all zeros).
This is not good and the issue fixed in commit 9468cb6eb1
could have been revealed earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replaced net_bytes_from_str in hostname_get test by a new function that
converts the unique part of the hostname in a byte array.
net_bytes_from_str can not be used as it assumes that the string input
is of the format "xx:xx:xx:xx:xx:xx" where as the unique part of the
hostname is a MAC address string without colons. If net_bytes_from_str
is used this could result in buffer overrun on the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
This is bad practice and may conceal issues on platforms
not in the whitelist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make sure net-shell is started properly and it does not crash.
The purpose of this test is to catch issues described in #19178
where UART was not working which was seen as net-shell crashing
at startup.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that resolving IPv4 address but returning IPv6 address
(and vice versa) is failing and we catch that scenario.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Got several sanity failures with this information
Assertion failed at tests/net/socket/poll/src/main.c:76: \
test_poll: (tstamp >= 30U && tstamp <= 30 + FUZZ is false)
In one of the failed tests, the tstamp was 50. Dunno what is
wrong here but in order to proceed with this, increasing the
timeout temporarily. This commit can be removed if the root
cause for this timeout is figured out.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Moving Kconfig options from testcase.yaml file to prj.conf so
that we can run the test app easily from command line and without
sanitycheck.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This was only used on the Quark SoCs. It is no longer used, can no
longer be tested, and it's reliant upon the deprecated legacy PCI
subsystem. Remove it to prevent bitrot.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We need to increase the stack size of the main thread, to
avoid stack overflow, when executing the tests on various
platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A second semaphore is used for the second trickle timer, so that if the
first timer expires twice before the second one, the test would still
wait before proceeding to check on cb_2_called.
Fixes#18598.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
CONFIG_MAIN_STACK_SIZE was originally 1344 in this test. The following
commit removed setting the stack size in the test:
commit 7b3cd7d371
Author: Cami Carballo <cami.carballo@intel.com>
Date: Fri Jul 26 10:59:16 2019 -0400
tests: net: increase stack size
However getting the default stack size on FRDM-K64F of 512 causes the
following panic:
FATAL: ***** BUS FAULT *****
FATAL: Stacking error
FATAL: Imprecise data bus error
FATAL: NXP MPU error, port 3
FATAL: Mode: Supervisor, Data Address: 0x20002ff0
FATAL: Type: Write, Master: 0, Regions: 0x8200
FATAL: r0/a1: 0x00000000 r1/a2: 0x00000000 r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x00000000 r14/lr: 0x00000000
FATAL: xpsr: 0x200002f4
FATAL: Faulting instruction address (r15/pc): 0x00000000
FATAL: >>> ZEPHYR FATAL ERROR 2: Stack overflow
FATAL: Current thread: 0x2000182c (main)
FATAL: Halting system
Bump stack back to original 1344 fixes the issue.
Fixes#18292
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We are trying to pass 64-bit value to the driver, but we only
allocate space for an integer. This will not work and will cause
invalid memory access.
Fixes#18205
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add new tests that make sure that sendmsg() works when using
connected UDP socket and when not setting msghdr destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
An issue was seen after changes introduced in #17933.
The net_context callback was run after we checked that it
was run ok. This test failed of course in that case. Simple
solution is to k_yield() which will make sure that the
callback gets called before we continue. This works for this
test as our threads have suitably selected priorities.
There is also no need to use K_NO_WAIT here so replacing the
timeout with K_FOREVER.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The testcases are adapted to handle more than one net buffer in
a net_pkt. After the IPHC optimization it is possible that IP header
is not in the same buffer than the UDP header.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Make sure that SO_TXTIME socket option can be set and get.
Verify also that TX time is passed properly to network device
driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Noticed this error print when running in mps2_an385 platform.
<err> net_if: There is no network interface to work with!
Adding CONFIG_NET_LOOPBACK=y removes this error. After this
the CONFIG_NET_IPV6_MLD=n needed to be added in order to avoid
crashes when IPv6 MLD is done which is not needed for this test.
Removed also the whitelisting as that is not really needed and
we want to run these in as many platforms as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to increase the stack sizes if user enables CONFIG_COVERAGE
option. You can test this by this command
sanitycheck --coverage -p qemu_x86 -T tests/net/udp \
-T tests/net/mgmt -T tests/net/mld
This is partial fix for issues described in #17323
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the socket descriptor is invalid (fd < 0), there is no
need to try to close it.
Coverity-CID: 198949
Fixes#16785
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
... because this test does use userspace, as seen in the source or
demonstrated by the failure of this command:
sanitycheck --extra-args=CONFIG_TEST_USERSPACE=n
See commit message of 4afcc0f8af for the long story.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Check return value of net_if_ipv6_get_ll() before accessing it.
Coverity-CID: 199437
Fixes#17201
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test AF_NET_MGMT API getsockopt() and setsockopt() functions that
they work properly when called from kernel or from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add unit tests to net_addr_ntop() and net_addr_pton() in order to
verify that the functions can be called from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The info parameter is difficult to use if the caller does not
get information how long the info struct is. So add info_length
parameter to net_mgmt_event_wait_on_iface() and
net_mgmt_event_wait() APIs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_gw_by_index()
and set the gateway if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_netmask_by_index()
and set the netmask if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mutex.h to sys/mutex.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is useful that the ptp_clock_get() function can be called from
the userspace. Create also unit test for calling that function
from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_eth_get_ptp_clock_by_index() clock API to work with user space.
Create also unit test for testing this user mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user supplies AF_UNSPEC, we need to do two queries, one for
IPv4 A record and one for IPv6 AAAA record.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some MPU systems require region power-of-two alignment
and can't automatically use remaining RAM for the newlib
heap. Set it for this case. Fixes this test on mps2_an385.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The file descriptor was not closed after the test which caused
Coverity to complain about resource leak.
Coverity-CID: 198640
Fixes#16493
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Now length of the UDP header is checked, and obviously these test were
avoiding setting it properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The various ptp_clock_driver_api methods receive a struct ptp_context
not a struct eth_context, and the later must be obtained from a
reference stored in the former. Failing to do so by directly
interpreting driver_data as a struct eth_context instance does end up
corrupting memory past the actual struct ptp_context storage. The test
may still pass as ptp_clock_get() reads from the same out-of-bounds
memory as the previous ptp_clock_set() and therefore the content
matches, and with luck the corrupted memory is not essential to the
completion of the test. But that wasn't my case which allowed me to
find this issue.
Fix this by properly obtaining a reference to the struct eth_context
instance via the actual struct ptp_context, and adding a test like
the one found in eth_tx() to make sure we got the right memory.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Inside function test_net_pkt_basics_of_rw result of function call
net_pkt_read_be16 is not checked which might result performance
of the program and cause errors.
Coverity-CID 198003
Fixes#15776
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Fixes the compile errors in various platforms like:
* sam_e70_xplained (too few network buffers)
* galileo, cc3220sf_launchxl and mps2_an385 (missing random number
generator configuration options)
Fixes#15878
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_if_ipv6_calc_reachable_time() requires sys_rand32_get().
Enable the test random number generator so the build doesn't
fail.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As the getaddrinfo() test is suppose to be self contained, then
we will need to install handler for the sent DNS query. After we
receive the query in process_dns() thread, we verify that the
query was sent properly. We do not return DNS reply back to
the caller in this case as we do not want to create DNS server
just for this simple test application. This can be changed later
if we get DNS server functionality in Zephyr network stack.
Fixes#15193
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ipv6_fragment tests registered log module but still use DBG
macro of printk. Replaced them with NET_DBG.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add more Kconfig options to prj.conf file. In the future we need
to compile also in other hw than qemu_x86 in which case we need to
create separate test cases for those configurations.
Fixes#15282
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Write the net_pkt using net_pkt_write() and then verify that the
data is actually written into net_buf.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test is designed to run in user mode, but was disabled
for some reason.
Re-enable, and add mps2_an385 to the whitelist as this is
the QEMU target that emulates an MPU.
Fixes: #15228
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various globals for the test cases have been moved to
the ztest memory domain data section via ZTEST_DMEM tags
so that user mode can access them.
Some anonymous arrays whose address was being placed in
the msg_subackX structs have been split out so they
are in ztest memory domain.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test case added for IPv6 neighbors. This will add more than
CONFIG_NET_IPV6_MAX_NEIGHBORS neighbors. Network stack should
remove oldest neighbor which is in STALE state and it should
add new neighbor. So call to net_ipv6_nbr_add() should succeed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch checks the return value after updating the packet.
Fix Bugs: #14821
Coverity CID: 196635
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove magic numbers from Ethernet drivers and tests by defining
NET_ETH_MAX_DATAGRAM_SIZE and NET_ETH_MAX_FRAME_SIZE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't depend on CONFIG_NET_SOCKETS_POSIX_NAMES being defined (e.g.,
it's going to conflict with POSIX API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195844
Fixes#14405
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195880
Coverity-CID: 195816
Fixes#14413Fixes#14395
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195835
Fixes#14409
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
If the rc = -EAGAIN from mqtt_read_publich_payload(), it shouldn't be
used in memcpy() since it is a negative value, and instead, it should
try to read again.
Fix: #13825
Coverity-CID: 191002
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Use the new net_pkt allocator. Fix a small leak in the test as well.
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The very first test was basically testing the checksum calculation. And
that's already tested in more relevant tests. It was also trying in a
cumbersome way to generate packets scattered over many net_buf. But
that's also already tested in various other tests, and it's not at all
part of core utils anyway.
In any case, that all redundant, so let's remove it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Use the new net_context option to enable timestamping of outgoing
packet (NET_CONTEXT_TIMESTAMP).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just a quick rm/mv. The new API is going to be the only one, so legacy
test can disappear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/0/K_NO_WAIT for all timeouts
And fix tcp context connect call (it's not net_context_listen obviously,
and one parameter was missing).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If peer socket closed, the other side should get 0 from recv(), and
should get in stable manner (no matter how much time went from the
closure and/or how many times recv() is called).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_pkt_alloc_with_buffer() takes IP header and protocol header
length while calculating total length internally. Need not
specify explicitly. Also mutex was not properly initialized.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
- differentiating actual "fragment" to buffer element from a net_pkt
- instead of copying data (and thus allocating buffer) let's just take
the fragment buffer and put it into result packet.
- fixing compilation issue in relevant test
It's more efficient that way, as we use already allocated fragment
buffer instead of reallocating/deallocating after each fragment
reception.
A possible optimization would be to calculate the actual size + header
difference if only the actual size is close to the target size.
It would avoid to get a dry run of the header decompression for each
fragment received. The difficulty being in finding the sweet spot when
it is relevant to calculate the header difference.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Now that the stack uses the new API from net_pkt for pulling, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for copying, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now useless and can be replaced by net_udp_get_hdr() directly, in
the 2 unit tests it was used.
Removing as well the dbg function too_short_msg()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the new API for these 2 functions. Note that in some places,
using these functions is under-optimized (like in llmnr-responder in
dns: it gets the ip/udp headers already from the recv callback. That
will need to be taken care of later).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_pkt_tcp_data was only used in tcp unit test and could be replaced by
local net_tcp_get_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function is only used in sockets, thus making it a private function
of socket library and renaming it relevantly.
Note that sockets should be reviewed at some point to avoid using such
function: zsock_received_cb() already get the ip header and the protocol
header, so it could grab the src addr/port from there. It would be way
more optimized to do so, since net_pkt_get_src_addr is costly as it
parses all over again the ip/protocol headers.
utils unit test is updated and the test of the former
net_pkt_get_src_addr/net_pkt_get_dst_addr are removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The DAD was failing because we received the DAD network packet
even when should not had received it. Fix it by discarding all
the ICMPv6 NS packets that we receive.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The packet can be referenced somewhere else and letting the newly added
L2 header will generate corrupt packet. If the same packet is being
resent, ethernet will add again its L2 header. Thus the need to remove
such L2 header every time a packet has been sent, successfully or not.
Fixes#12560
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixed typo: CONFIG_NET_NET_PKT_LOG_LEVEL_DBG, removed extra _NET.
Removed debug macro CONFIG_NET_DEBUG_NET_PKT that is not used.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The test had hard coded address family with value 4. This test
was failing as we have now AF_CAN family with value 4. Use 99
as an invalid address family value instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we are adding more protocol families and protocol types
to connection handlers, some values might be same across
different types. Current connection handler only stores
proto type to match the handler, which is not enough if
we add more types. Also combination of family and types
may vary too. So adding family to connection handler to
figure out best match.
Also changing proto variable in net_conn from u8_t to u16_t.
net_context has 16 bit proto.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As the legacy library has been removed, we no longer need to
differentiate betwen MQTT implementations. Therefore align the library
folder name with other libraries and remove the `_sock` suffix.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As written originally, the tests assumed that if k_uptime_get_32()
returns times in milliseconds, that it also has millisecond
resolution. That however doesn't have to be the case, and indeed,
default timer interrupt period used by Zephyr is 10ms, and so system
time is incremented in such units. So, instead of "<= 1" tests to
account for timing increment, use "<= FUZZ".
For blocking tests, increase the timeout from previously used 10ms,
so we can reliably tests delays under the conditions described.
Also, enable CONFIG_QEMU_TICKLESS_WORKAROUND. Most other
timing-related tests have this enabled, and it may affect
stability of QEMU testing too.
Fixes: #12994
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In case of Ethernet, if the requested size is larger than MTU and if
AF_UNSPEC is provided, the allocator will need to take into account
the ethernet header size which is not accounted in the MTU.
Other current L2 do not follow that rule as their MTU is based on IP
one (IPv6 most of the time). What they declare as MTU is the full frame
size they handle (minus the FCS for instance in 15.4). So with
AF_UNSPEC, such assumption on L2 header size is unrelevant.
(On 15.4 the header size is variable anyway and cannot be known until
the frame is parsed).
Fixes#12982
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though these are currently used by the core only, it will be then used
by net_context as well. This one of the steps to get rid of net_pkt's
appdata/appdatalen attributes.
Also normalizing all ip/proto parameters name to ip_hdr and proto_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This goes through basic allocation, atomic read/write, data
getter/setter and cloning/copying.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The test counts the '\0' of the data copied, though it does not belong
to the packet.
Since the test by-passes net_ipv6_input, which would update the packet
length according to what is in the IPv6 header, the checksum calculation
fails.
Before, checksum calculation used to grab the length from IPv6 header,
but that changed to use net_pkt_get_len(): that one must provide the
real lenth.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only next to be removed functions like net_tcp_set_checksum() are left
untouched. All the rest is switched.
Adding net_tcp_finalize() to follow the same logic as for UDP and else.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This proovse to drastically reduce runtime overhead as it does not need
to parse IP nor TCP header all over again in a lot of places.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As these were parsed already by IPv4/6 input functions let's use them.
Applying the change on trivial UDP usage. TCP usage will have its own
commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This optimizes the memory quite a bit since we do not need to clone nor
split the original packet at any time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of the code had to be reworked due to the new API: it's more
logical to do everything sequentially (first headers, then MLD part)
than the contrary with inserting headers at the end.
Using get_data/set_data as well it makes the code clearer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
This part was heavier to change as it was not accessing the headers
directly but instead was read parts by parts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In nbr part, this is a useful information. Since net_icmpv6_input has
already parsed the icmpv6 header, let's get pass it, instead of
retrieving/parsing it again in various handler functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV6_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new net_pkt API to proceed through IPv6 header and all the
extension header as well.
Use udp/tcp input functions relevantly, and call net_conn_input
afterwards.
Note: This commit temporarly disable IPv6 fragmentation support
in the code directly. Which support will be re-enabled afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
checksum_offload is now the only one using that function, let's get rid
of such usage.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The disabled test causes crash in qemu_x86, so temporarily disable
it until a proper fix is found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit makes the necessary changes to allow the following tests
to run on cc3220sf_launchxl:
- mqtt_packet
- mqtt_publisher
- mqtt_subscriber
- mqtt_pubsub
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
There was a false timeout error because we did not check the
return value correctly. This issue is seen now because code
flow in core IP stack is happening in different order than
before.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is the macro name that matters, not its value. Here, that will help
to save 1 bit in struct net_pkt later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The previous commit replaced the net_pkt element ref with an element
atomic_ref. CI tests turned up more places where ref was used directly.
This commit converts them to use the new element.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Basic test for poll() behavior. UDP sockets are used for simplicity
so far (poll-related paths for UDP and TCP are similar, though later
adding TCP explicitly for full coverage may be useful).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that we should have many, many tests. The only reasonable
way to achieve that is by making tests easy and pleasant to write,
and that requires common, easy to reuse infrastructure.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Consistently use prepare_sock helpers.
2. Test not just client->server sending, but sending reply.
3. Send large packets (>1 net_buf fragment), not just small.
4. Check POSIX behavior on recv()ing datagram incompletely (the rest
should be discarded and next recv() should read next datagram.
5. More cleanroom testing, e.g. explicitly reinitialize input params
on each call (without assumptions that they're left with suitable
values from previous calls), clear input buffers before each read
operations, etc.
6. Reformat code. Previously it was very sparse, giving long test
functions, and thus impression that tests are complicated and hard
to write.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
