Adding bt_tester support.
Adding bt_tester app build
with Twister for frdm_rw612 board
Fix failing tests/samples due to unsufficent MPU ressources
by releasing unnecessary MPU regions.
Twister builds added on peripheral/central ht and
enabled Power manager on those examples to cover
the CI builds with PM enabled.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
PR #72475 disabled default enabling of many Mbed TLS features
including AES. This means that now it must be explicitly added
when required.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
PR #72475 disabled default enabling of most Mbed TLS features.
This means that:
- CONFIG_MBEDTLS_CIPHER_AES_ENABLED needs to be manually enabled
when required;
- CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC does not need to
be (almost) always added because there is no default RSA
key-exchange enabled, so PSA can be built without RSA support.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Before #72243 Mbed TLS was not using
USE_PSA and all PSA features were not enabled. After #72243
if BUILD_WITH_TFM is set:
- USE_PSA in Mbed TLS is enabled by default and
- all PSA features are enabled.
This commits reverts both changes for tests/crypto/mbedtls
test case.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adding bt_tester support.
Adding bt_tester app build
with Twister for rd_rw612_bga board
Fix failing tests/samples due to unsufficent MPU ressources
by releasing unnecessary MPU regions.
Disable twister build on samples that are not meant to
be supported on this board, so exclude it from the test cases.
Update peripheral/central ht sample.yaml files
to test build for rd_rw612_bga.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
This commit adds a custom target to tests/crypto/mbedtls in
order to verify that MbedTLS auto-generated files are up to
date.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- Do not set CONFIG_MBEDTLS_ZEPHYR_ENTROPY in
tests/crypto/mbedtls because this can cause test failure on
real devices in which test thread do not have access to
drivers.
- make MBEDTLS_PSA_CRYPTO_RND_SOURCE depending on
MBEDTLS_PSA_CRYPTO_C because it only makes sense when the
latter is defined
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
CONFIG_MINIMAL_LIBC was required for:
- CONFIG_MINIMAL_LIBC_NON_REENTRANT_FUNCTIONS
- CONFIG_MINIMAL_LIBC_RAND
while CONFIG_ENTROPY_GENERATOR and CONFIG_MBEDTLS_ZEPHYR_ENTROPY
are required for CRYPTO_C.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Enable these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
For drivers.rand32.random_psa_crypto, filter the posix
arch to save some CI time, as TFM is not supported in this
architecture all together.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With picolibc moving to using the common malloc implementation, samples and
tests with picolibc-specific settings need to switch to using the common
malloc settings instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
TC_START is used to evaluate output of tests and is used internally by
ztest when a test starts, no need to call this manually here.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use namespacing with extra_configs in some tests and remove duplicated
scenarios the were made arch or platform specifc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Whenever MBEDTLS_BUILTIN is selected then
CONFIG_MBEDTLS_CFG_FILE="config-tls-generic.h" is set as a default value.
It is even impossible to change it, as without CUSTOM_MBEDTLS_CFG_FILE it
is just a hidden (not configurable by user) Kconfig option.
Remove explicit configuration from prj.conf.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This commit introduces a new configuration called
`CONFIG_MINIMAL_LIBC_NON_REENTRANT_FUNCTIONS`, which enables the
traditional non-reentrant (i.e. not thread-safe) version of the C
standard library functions such as rand() and gmtime() when the
respective configs are enabled.
The non-reentrant functions make use of the globals and require an
additional memory partition (MPU region), which is scarce on low-end
devices, when CONFIG_USERSPACE=y.
The purpose of this option is to classify the MPU resource intensive
functions as a separate category and only enable them when there is a
demand for such.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix errors like:
inlined from ‘test_mbedtls’ at
zephyrproject/zephyr/tests/crypto/mbedtls/src/mbedtls.c:172:6:
zephyrproject/zephyr/tests/crypto/mbedtls/src/mbedtls.c:96:17: error:
‘test_snprintf’ reading 10 bytes from a region of size 1
[-Werror=stringop-overread]
96 | test_snprintf(1, "", -1) != 0 ||
| ^~~~~~~~~~~~~~~~~~~~~~~~
In GCC >= 11 because `ret_buf` in some calls are shorter literals
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This changes both k_mem_domain_add_partition() and
k_mem_domain_remove_partition() to return errors instead of
asserting when errors are encountered. This gives the application
chance to recover.
The arch_mem_domain_parition_add()/_remove() will be modified
later together with all the other arch_mem_domain_*() changes
since the architecture code for partition addition and removal
functions usually cannot be separately changed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Apply the modifications required by the newer library version.
These modifications came from the original file in the mbedTLS
repository.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When MBEDTLS_RSA_C is defined, mbedtls define its local version of
rand() function. Since we already have rand() in our minimal libc, we
can safely remove this.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
The testcase allocates lots of stack space, many KiB, for RISC-V
64-bit in the mbedtls bignum functions.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It exists only if MBEDTLS_PLATFORM_PRINTF_ALT is defined, whcih we
no longer do, but make the call condiitonal in case we'll need to
make it configurable later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The mbedtls library has some globals which results in faults
when user mode tries to access them.
Instantiate a memory partition for mbedtls's globals.
The linker will place all globals found by building this
library into this partition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We were reporting results twice, something that might confuse test
systems and end up reporting wrong results. Assert if any self-tests
have failed and report at the very end.
Disable test on x86_64.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The intent of this Kconfig is to allow libc stdout
functions like printf() to send their output to the
active console driver instead of discarding it.
This somehow evolved into preferring to use
printf() instead of printk() for all test case output
if enabled. Libc printf() implementation for both
minimal libc and newlib use considerably more stack
space than printk(), with nothing gained by using
them.
Remove all instances where we are conditionally
sending test case output based on this config, enable
it by default, and adjust a few tests that disabled
this because they were blowing stack.
printk() and vprintk() now work as expected for
unit_testing targets, they are just wrappers for
host printf().
Fixes: #13701
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
