There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those tests are now build with unified kernel.
Change-Id: Idbc42bb77060cea0130d62cccdf2e40aeee89128
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This can be used to initiate an outgoing connection
Syntax:
>br-rfcomm-connect <channel>
Change-Id: I7ac7aeb61e7ae7e3f55c7cd7e815bdb604b27fb3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an Arduino 101-specific configuration that enables flash-based
storage support as well as the file system shell.
Change-Id: Ic10ea958dd2446df4942a8dfd3cce1e3368852b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement a new "clear" command to exercise the bt_storage API. The
command can either take an address parameter to clear storage for a
specific device, or, if called with the parameter "all", to clear the
entire storage.
Jira: ZEP-181
Change-Id: I1ebd17033f2062951abeeb7d7c448a34a3672577
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds support for setting the minimun required security level to
l2cap_register command:
l2cap-register <psm> [sec_level]
Note that entering the security level is optional and the default is
BT_SECURITY_LOW(1).
Change-Id: Ib6dea92919357f41fe2f4de3050b9a10a7f553d6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These options were only needed for a MyNewt-based nRF51 firmware on
these boards (the MyNewt BLE stack is called Nimble, hence the
prj_nimble.conf sample config files). With a Zephyr-based nRF51
firmware these options are no-longer needed, so it's not appropriate
to have them default to enabled. Instead, if they are needed, require
the app-specific configuration to enable them.
Change-Id: Iefbee4d97590af4e11bcedea05fe61f32a147b83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This change shortens the Service Class macro name from
BT_SDP_*_SVCLASS_ID to BT_SDP_*_SVCLASS
Change-Id: I1150baae24428c6b76f005d11003291016e0a03e
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds SPP as a sample SDP service during RFCOMM
server registration. The SPP channel is now used as the
fixed channel for RFCOMM register command.
Change-Id: I3b5ad3995725adca55db1497d4a35099f6311f3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Some of tests/bluetooth test are failing link step only when debug
is enabled, these filters prevent those tests from being executed
under such configuration.
Jira: ZEP-1063
Change-Id: I87fa73710d78346b1b2ce587e9055b0732d9cb49
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Remove BT_RFCOMM_SEND_RESERVE usage since it will be removed
eventually.
Change-Id: Iada20cf0692ae12996e7ed820601bb77fe47d438
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Sets new command in BT shell app to send data to peer
Syntax:
>br-rfcomm-send <number of packets>
Change-Id: Ic795d007a03f657afb833719ae0e800ca0ac6e0b
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
prj.conf is for single mode LE controllers.
Change-Id: I138a560f4e33f6663135bbcbb4d8aeb5955342a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
BR/EDR support in chip is mandatory if BR/EDR is enabled so add
separate config for it. This is to avoid problems when using
single mode LE controller.
Change-Id: I9d9692b89883dd1980803d66818fb6e3a368afb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Sets new command in BT shell app to allow register one RFCOMM server.
Syntax:
>br-rfcomm-register <Channel>
It also accept the connection from remote and provides dlc object
Change-Id: I99f672ee68785338f3bf22948d4f33b3e1aecd2e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This sets BR/EDR name with same value used over LE.
Change-Id: I29407b0b44907b520b0f39afe868fc612c5e47d4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Depending on advertising options this can be non-connectable address.
NFC pairing application document also allows broadcaster/observer
roles.
Change-Id: I9b104ac8fb9752a083a7a31fc20598c66f23f608
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to query LE and BR/EDR OOB data.
Change-Id: I8bc281a9549092c1c4b40c346580abb5fd51d02d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to test if receiving and sending simultaneously is
working properly with tools such as BlueZ's l2test.
Change-Id: Ic6bcd00a4e1448bebd3ae74bcc58986872332bbe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add HRS simulation to shell allowing to switch on / off HRS simulation
helping testing GATT notifications.
Change-Id: Idf99b74ac73d45d2f0d3279d50431be4027fef8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds to BR/EDR L2CAP client channel object required handlers and allocate
room for channel data traffic to make it operational when fully
setup and to be interactive with internal stack.
Change-Id: Id1e90d7ea318ed8a875383995e4d175e124939eb
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Fixes wrong server instance used during printing details on registration
PSM server.
Change-Id: I269d20bf4d12f24ce143a04c1c23ed8711b9cdba
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The parameter is already inside a struct that's specific to BR/EDR
discovery, so there's no need to repeat "discovery" in its name.
Change-Id: Idb95788bfc9d62ecd52adecc35104e212724cb78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since we only have a single user we can enforce length > 0x01. We
should also ensure that the results count is 1-255.
Change-Id: Id5d91acae06c6c6fc66dd59c0e367682a98dc08c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactors L2CAP core data structures and modifies functions that uses them.
Now we can have separate L2CAP feature channel objects for LE and BR/EDR
transport. This's also a ground for make L2CAP CoC API to be common
for both transports.
Change-Id: Ic1197b0e3c4f505764b23fb9c7eb27123a44a675
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Buffers pass to BT stack need to have minimum BT_BUF_USER_DATA_MIN
of reserved user space data.
Change-Id: Iaeb85faa20b1c5281bfd0331336295ad7cfdd68e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the more explicit net_buf_get_timeout() call where it makes sense
(e.g. where we always want to wait or never want to wait).
Change-Id: Id1eabe0ad2f9fa79f7be39e51fefa5161f9cc550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows to set custom ID address from shell app.
Change-Id: I293800f116a7e56e183720a9b908ccb0e9622c12
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Return correct errors for long write.
Change-Id: Idfd54d961db9b2023d05a0dcfa7082d63e9c0261
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to use LE SC with nimble firmware running on Arduino 101
board.
Change-Id: I3a9a485dc87c367160da98010d0189dfef09d5de
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adding test service makes possible to test Bluetooth PTS test cases
with the shell. Currently long and auth characteristic.
Change-Id: I153efd3f7fa266f93873ef978025faf72c664076
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds help strings to commands describing what parameters they take:
btshell> help init
init [none]
btshell> help connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: I0b79cb4f2d424f74b0ddb1de7a6d7120e81e2ae3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Support long write maximum 100 bytes.
Change-Id: I071fdf68e29a3d4493c1c60215853cfd8f2ae3c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For memory-constrained platforms (like the Arduino 101) it's desirable
to be able to build a slimmed-down shell app that doesn't contain any
unnecessary features. This patch makes more of them optional.
Change-Id: Ia7f2cc0930dda6dfed5ce020b56913c6e0bc3d6f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to accept or decline incoming pairing that would
otherwise result in JustWorks pairing.
Change-Id: I759ea067ef298b437e0112b8b7ef3bedf106dc52
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to have separate configs as init sample is now
used for different build configuration tests.
Change-Id: I917692f8a8e96345afc561dd04bdcf08cdfa5de7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For STM32F103RB targets, the SRAM is overflown by 2-3kB in microkernel
test. Platforms with this SoC can still be built for in the nanokernel test.
Change-Id: I012b93cf8dfec74292f7ab228f4b2fca1a4f3444
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array. This
moves ~280 bytes from SRAM to the text section.
Change-Id: Id64ee766e3c6cf7ce4cc623a1e21d3dacf33f050
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
The extended inquiry response data format include at least two octets:
length and type, so adding NULL termination name shall be 240-2+1
octets.
Fixes accessing wrong memory in the statement below:
...
memcpy(name, &eir[2], sizeof(name) - 1);
...
Change-Id: I71be96aed6af63d0649f4d64271208eeb11e2c6c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This function is not used outside of main.c.
Change-Id: Ia8cc6c2b2193906dd77d031b73d289c6acd128b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows to initiate BR/EDR connection with specified address.
Change-Id: I99f0d7dff29384926d3bf739831c7460a7fb5f68
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Clear subscription allowing to test subscribe / unsubscribe in
sequence.
Change-Id: Ife8b994410107f05c23687e3fb23b4a81cad8ce7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
bt_auth_cancel can be used to cancel any type of pairing.
Change-Id: Ia1a6ba834186ab6d5082d3eb473319c2d70cf4a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bluetooth/shell and bluetooth/tester need to be disabled on
galileo and minnowboard respectively. On these platforms,
the IRQ for the UART console and the H4 are the same IRQ line.
IRQ_CONNECT() is being called on the same IRQ line twice, and
it's only through linker luck that these tests work at all
since one driver will "win" when the mapping is set up at build
time by gen_idt.
gen_idt was supposed to break the build in this situation but
was bugged. The next patch in the series fixes gen_idt.
Change-Id: Ib4a42b57181731121dfad50606c8362a9fd0277d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Makes shell output readable by disabling extensive debug from UART
driver.
Change-Id: Ic8df252c8ca4abd6b021db11d266f4db80df4b09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Combine both nano and micro tests and cleanup whitelisting
for the testcases to include all buildable boards.
Change-Id: I28d41b82fb60d75d4b172d9dd3ac7e71480053b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The init, init_h5 and shell are not really samples but fit better in
the test category.
Change-Id: Id1a7ff31ad8767f858705bd952311cf64ff1f3f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
