The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
To be able to pass the unit test we need to add a set of defines for the
ARM64 architecture. Fix this.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The regular version of this test has CONFIG_MP_NUM_CPUS=1,
but this was omitted in the userspace version, and I am
seeing crashes on an SMP-enabled target that supports
user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Parse output of test to verify success, this was previously treated as a
test and now it is using the console handler, so we need to verify
success using regex.
Fixes: #20177
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using a device with a kernel clock below 1MHz (e.g. nRF52) resulted in
a division by zero. Added support for such devices by multiplying
before dividing.
Signed-off-by: Mario Noseda <mario.noseda@zhaw.ch>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
And set qemu_x86_long board to build with CONFIG_SMP=y by default.
Apparently two benchmark tests - latency_measure and sys_kernel -
do not work with the SMP scheduler, so those tests are disabled.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These are renamed to z_timestamp_main and z_timestamp_idle,
and now specified in kernel_internal.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Global variables related to timing information have been
renamed to be prefixed with z_arch, with naming arranged
in increasing order of specificity.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Disabling SMP mode for certain tests was a one-release thing, done to
avoid having to triage every test independently (MANY are not
SMP-safe), and with the knowledge that it was probably hiding bugs in
the kernel.
Turn it on pervasively. Tests are treated with a combination of
flagging specific cases as "1cpu" where we have short-running tests
that can be independently run in an otherwise SMP environment, and via
setting CONFIG_MP_NUM_CPUS=1 where that's not possible (which still
runs the full SMP kernel config, but with only one CPU available).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This adds support for NXP's Freedom K22 board.
Co-authored-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Co-authored-by: Tom Burdick <thomas.burdick@gmail.com>
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
Minnowboard and ACRN do not use the new APIC timer, so the
benchmark code will not run on them (yet).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These all currently use the HPET timer, and thus can't build with
BOOT_TIME_MEASUREMENT enabled, so disable for now. This test is
basically a build-only test, so we're covered with the other x86
targets (gpmrb, up_squared) for now.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Neither of these options is actually used; CPU_CLOCK_FREQ_MHZ appears
to have been part of x86 BOOT_TIME_MEASUREMENT at some point, and
PERFORMANCE_METRICS is the stillborn cousin of EXECUTION_BENCHMARKS.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The k_stack data type cannot be u32_t on a 64-bit system as it is
often used to store pointers. Let's define a dedicated type for stack
data values, namely stack_data_t, which can be adjusted accordingly.
For now it is defined to uintptr_t which is the integer type large
enough to hold a pointer, meaning it is equivalent to u32_t on 32-bit
systems and u64_t on 64-bit systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Using void pointers as universal arguments is widely used. However, when
compiling a 64-bit target, the compiler doesn't like when an int is
converted to a pointer and vice versa despite the presence of a cast.
This is due to a width mismatch between ints (32 bits) and pointers
(64 bits). The trick is to cast to a widening integer type such as
intptr_t and then cast to
void*.
When appropriate, the INT_TO_POINTER macro is used instead of this
double cast to make things clearer. The converse with POINTER_TO_INT
is also done which also serves as good code annotations.
While at it, remove unneeded casts to specific pointer types from void*
in the vicinity, and move to typed variable upon function entry to make
the code cleaner.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a system clock tick of 0.1 sec when running on the NXP TWR-KE18F
development board.
Fixes#16234.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fix a bug in the latency_measure sample where, when the board was
specified through the environment, the wrong prj.conf file was
selected.
This change is not a pure refactoring, as it is believed that there
have been some copy-paste mistakes where prj_small_freq_divider.conf
and prj.conf have become out-of-sync over time. These assumed mistakes
are not carried over in the new organization.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove commented-out code in the latency_measure sample. Commented out
code should not be committed to version control.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
As printf() is now used directly instead of printf proxy function,
there's warning-as-error that long long is passed where %lu
expected, so cast it explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It exists only if MBEDTLS_PLATFORM_PRINTF_ALT is defined, whcih we
no longer do, but make the call condiitonal in case we'll need to
make it configurable later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In all architectures, except x86, __start_swap_time is directly
updated by function read_timer_start_of_swap(), and it shall not
be registered via __temp_start_swap_time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We were running this as a test and not evluating the output. Now we
verify the output and stop treating this as a ztest item.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The results were incorrect because the timer was firing the
interrupts before the measurement was made.
Fixes: GH-14556
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
(Chunk 1 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Just like with _Swap(), we need two variants of these utilities which
can atomically release a lock and context switch. The naming shifts
(for byte count reasons) to _reschedule/_pend_curr, and both have an
_irqlock variant which takes the traditional locking.
Just refactoring. No logic changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Those are outdated and unrunnable tests that require lots of
customization to keep them building and the information they provide
can't be retrieved in other means.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Useful tool for performance work that removes interaction with other
APIs and thread state. The best part is that it doesn't rely on timer
interrupt delivery and so works with -icount even on existing qemu
versions and produces deterministic output.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests need to use stack size as a function of
CONFIG_TEST_EXTRA_STACKSIZE. These test will fail when
CONFIG_COVERAGE is enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's worth using custom timing information on a few systems to save
cycles or gain precision. But make the use of k_cycle_get_32() a
proper default instead of hardcoding all the platforms and failing to
build on new ones. On Xtensa and RISC-V (and now x86_64) the cycle
informatoin from that call is a very fast wrapper around the native
counters anyway -- all you would save would be the function call
overhead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The constant NSEC_PER_USEC is already defined in sys_clock.h, there is
no need to define it here.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
These tests was written to try to eliminate timer interrupts, but the
mechanism chosen (setting TICKS_PER_SECOND to 1) is dangerously
susceptible to overflow conditions on systems with fast cycle counters
and high timeout durations.
Actually the tests pass just fine if you use a conventional tick rate
and use a tickless-capable driver (which eliminates interrupts too,
which is the whole point), but there's no easy way in kconfig to do an
"if" to select that condition for capable systems only. Just disable
tickless to keep the same behavior.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
I was pretty careful, but these snuck in. Most of them are due to
overbroad string replacements in comments. The pull request is very
large, and I'm too lazy to find exactly where to back-merge all of
these.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that the API has been fixed up, replace the existing timeout queue
with a much smaller version. The basic algorithm is unchanged:
timeouts are stored in a sorted dlist with each node nolding a delta
time from the previous node in the list; the announce call just walks
this list pulling off the heads as needed. Advantages:
* Properly spinlocked and SMP-aware. The earlier timer implementation
relied on only CPU 0 doing timeout work, and on an irq_lock() being
taken before entry (something that was violated in a few spots).
Now any CPU can wake up for an event (or all of them) and everything
works correctly.
* The *_thread_timeout() API is now expressible as a clean wrapping
(just one liners) around the lower-level interface based on function
pointer callbacks. As a result the timeout objects no longer need
to store backpointers to the thread and wait_q and have shrunk by
33%.
* MUCH smaller, to the tune of hundreds of lines of code removed.
* Future proof, in that all operations on the queue are now fronted by
just two entry points (_add_timeout() and z_clock_announce()) which
can easily be augmented with fancier data structures.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The system tick count is a 64 bit quantity that gets updated from
interrupt context, meaning that it's dangerously non-atomic and has to
be locked. The core kernel clock code did this right.
But the value was also exposed to the rest of the universe as a global
variable, and virtually nothing else was doing this correctly. Even
in the timer ISRs themselves, the interrupts may be themselves
preempted (most of our architectures support nested interrupts) by
code that wants to set timeouts and inspect system uptime.
Define a z_tick_{get,set}() API, eliminate the old variable, and make
sure everyone uses the right mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This just got turned into a function from a "variable" API, but
post-the-most-recent-patch it turns out to be degenerate anyway.
Everyone everywhere should always have been using the kconfig variable
directly, and it was only a weirdness in the tickless API that made it
confusing. Fix.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The $srctree environment variable gives the path relative to which
'(o)source' statements work (the current directory is used if $srctree
is unset). It is set to $ZEPHYR_BASE in cmake/kconfig.cmake, so there's
no need to qualify the source of Kconfig.zephyr in sample Kconfig files
(or in external projects).
All 'source's in Zephyr assume that the Zephyr root directory is used as
the srctree as well, and would break otherwise.
Remove the $(ZEPHYR_BASE)s to make it clearer that all 'source'
statements work relative to the Zephyr root. There was some user
confusion on IRC.
Also explain how things work in the documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add ifdef guard to the z_reset_timeslice() to fix compilation
errors when CONFIG_TIMESLICING is disabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It is no longer necessary to set the KCONFIG_ROOT variable when the
KConfig file is in the application root directory.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The total number of loops being executed were taking far too long
to finish executing the test case. This was causing the timer handler
to execute in the middle of the test case. Thereby causing a test case
failure.
Now the number of loops have been reduced and this will make sure the
test case completes.
This change has no effect on the time being calculated by the
benchmark.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
With the new Kconfig preprocessor (described in
https://github.com/torvalds/linux/blob/master/Documentation/kbuild/
kconfig-macro-language.txt), the syntax for expanding environment
variables is $(FOO) rather than $FOO.
$(FOO) is a general preprocessor variable expansion, which falls back to
environment variables if the variable isn't set (like in Make). It can
also be used in prompts, 'comment's, etc.
The old syntax will probably be supported forever in Kconfiglib for
backwards compatibility, but might as well make it consistent now that
people might start using the preprocessor more.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In NRF52 we need to write to a capture register to retrieve the current
counter value. This was missing for userspace implementation.
Fixes: GH-9676
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Few SoCs whose clock speed is very less will cause multiple ticks
to occur for 1 sec of sleep. For such a platform we cant run
the loops for over 5000 because the tick handler will get executed.
Thus rendering the test useless for such platforms. By reducing
the number of iterations we get the required benchmark results.
Fixes: GH-7906
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from riscv32 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from nios2 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from xtensa based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Discard selected measurements that occur immediately before and
after the timer interrupt occurs. This causes fluctuations in the
time measured.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from ARC based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Added new KPIs for the userspace benchmarks.
1. Drop to user mode.
2. User thread Creation.
3. Syscall overhead.
4. Validation overhead k object init.
5. Validation overhead k object permission.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Disable CONFIG_I2C and CONFIG_SPI for minimum footprint test,
since we are doing "minimum" footprint.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The return value from the k_mem_slab_alloc was not read. Hence
adding code to make use of this return value.
Fixes: GH-6681
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All architecture defines OCTET_TO_SIZEOFUNIT and SIZEOFUNIT_TO_OCTET
as identity functions. But the only user is tests/benchmarks/app_kernel.
It's effectively a no-op. Remove them.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disable userspace for benchmarks because it changes the KPI
numbers. It will be re-enabled once the required code is
in place.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
These are no longer needed since commit 4dc9e5b2de ("kconfig: Get rid
of 'option env' bounce symbols"). The C tools are likely to get rid of
them soon too.
The APPLICATION_BASE symbol (option env="PROJECT_BASE") triggered a
compatibility warning, because 'option env' symbols now need to have the
same name as the environment variables they reference to be compatible
with Kconfiglib. APPLICATION_BASE is unused, so just remove it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_COMMAND_STACK_SIZE was removed in 4f798177cf ("kernel: remove
old micro/nanokernel C code"). Its help was "Microkernel server command
stack size (in packets)".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Kconfig option TOOLCHAIN_VARIANT (not to be confused with
ZEPHYR_TOOLCHAIN_VARIANT) is a legacy configuration option that has
very few use-cases and can easily be dropped.
It's functionality is easily covered by CONFIG_X86_IAMCU and
ZEPHYR_TOOLCHAIN_VARIANT.
This commit removes all references of it from Zephyr.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Following tests were failing on a microcontroller with 32KB flash:
benchmark.application
crypto.ecc_dh
crypto.ecc_dsa
test_build_ethernet
test_build_sensors_a_m
The min_flash option has been added in the test case yaml files.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This test can also be run in ARCH_POSIX
+
added a filter in the test yaml so it does not float fault
with too low HW frequencies
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
benchmark/app_kernel test was giving a float exception
if the operations were performed faster than the
system timer resolution.
Added a safety macro in all divisions to avoid the fault
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Remove references to k_mem_pool_defrag and any related bits associated
with mem_pool defrag that don't make sense anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
A space-constrained device wouldn't enable this feature.
Fixes build errors since these tests constrain the size of
the IDT.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
nrf SOCs use external timer for measuring benchmarking stats.
Earlier this timer is programmed in 24 bit mode, due to which
is is getting expired in some of benchmark stats like mutex
lock/unlock. So configuring to 32 bit mode to avoid overflow.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Some of benchmark stats were not reported for nrf52/52 based SOCs.
This was because nrf based SOCs use external timer.
In timing info some of benchmark stats still use systick based APIs.
Due to which benchmarking number was not getting reported. So change
it to timer based for nrf.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
nrf SOC uses nrf rtc timer (not sys tick), which is 32kHz,
whereas CPU runs at higher speed (nrf52 runs at 64MHz).
So 32Khz is too slow to measure critical kernel parameters.
This patch does :-
1. Add support for nrf SOC for timing_info benchmarking.
2. Uses SOC timer to measure kernel parameters.
Jira: ZEP-2314
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
The API/Variable names in timing_info looks very speicific to
platform (like systick etc), whereas these variabled are used
across platforms (nrf/arm/quark).
So this patch :-
1. changing API/Variable names to generic one.
2. Creating some of Macros whose implimentation is platform
depenent.
Jira: ZEP-2314
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
This was failing to build when the PWD was not that of the
tests/benchmarks/object_footprint because it was asking to load
$(PWD)/Kconfig.
Kconfig shall be specified with no directory location, as the file
will be imported relative to to Zephyr app's directory.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The size of the interrupt descriptor table is not really
relevant to this test.
If any driver enabled for the target board gets enabled and
has a priority level outside the IDT range, gen_idt.py is properly
reporting an error. The old C-based gen_idt seems to have allowed
this to slide by.
Issue: ZEP-2496
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabled the boot_time test on ARM SoCs, set __start_time_stamp on ARM
since we don't have a free running counter similar to TSC on x86.
Also moved to printing the values out as %u to increase the range of
values.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Test whichever had Camel case defined for functions and variables have
been replaced.
Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
enclosed in a do - while loop
- do not use C99 // comments
JIRA: ZEP-2249
Signed-off-by: Punit Vara <punit.vara@intel.com>
Where possible, replace the use of filter with newly added keywords.
This will speed things up and in some cases add more coverage due to bad
filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Changed _tsc_read() to k_cycles_get_32(). Thus reading the
time stamp will be agnostic of the architecutre used.
2. Changed the variable names from *_tsc to *_time_stamp.
JIRA: ZEP-1426
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update the arm.conf to enable CONFIG_FLOAT for the float test and use a
filter on that so we only run/build the test on SoCs/boards that support
floating point hardware.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The error was generated by a piece of code that is
not currently being used. This piece of code was kept to measure
the overhead caused by the benchmarking code on x86.
JIRA:ZEP-2160
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Static code analysis reported some kernel APIs were used without
reading the return value. Since the benchmark doesn't need error
conditions, a simple read of the values followed by a ARG_UNUSED
is used to handle static code analysis errors.
JIRA: ZEP-2134
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
We reserve a specific vector in the IDT to trigger when we want to
enter a fatal exception state from software.
Disabled for drivers/build_all tests as we were up to the ROM limit
on Quark D2000.
Issue: ZEP-843
Change-Id: I4de7f025fba0691d07bcc3b3f0925973834496a0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need a bit over 32k of memory to build/run the app_kernel benchmarks.
Change-Id: Iddfeb073f8ea87dc6323775a288b83efa88fdaea
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This test takes a bit longe than specified and fails on a daily basis
due to the low timeout specified.
Change-Id: Id774c35cb1b0d0dcc5455e4121a8e9e1612baafd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Deleted the instance of app_kernel in tests/legacy/benchmark.
JIRA: ZEP-1980
Change-Id: I5a6e073d9b0c870be0cc7d8ae5bb352b11d7f97e
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add __printf_like attribute to printf style functions in minimal libc to
enable the compiler checking this provides. We fixup the associated
issues that are now found by utilizing these checks.
Change-Id: I74ac0d0345782463d9fb454f7161d6b4af211ba5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We ended up having "benchmark" and "benchmarks". This
fixes that.
Change-Id: I7ebc409e002e11f5bc9dc821310dd84f3982b8d4
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Right now works only on x86, filed bug to address all architectures
(ZEP-1414).
Change-Id: Iba53b3688b2b78a4189df0b50578070a8d2ac8b2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
