Adds a missing network include file which was causing an undefined
function build failure, likely caused by a recent change affecting
includes in other header files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add a new option to split off the building of the HCI layer of the
controller. This layer is not needed by the controller unit tests, and
becomes problematic with the planned change to use devicetree for HCI
drivers.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Add statistics module which tracks the usage of modem backend
transmit/receive buffers if implemented by a backend.
A modem backend may register itself to the modem backend
stat module, and advertise its transmit and receive buffer
sizes and momentary usage (length).
The modem backend module tracks the maximum usage, which can be
output to the shell using the "modem_stats buffer" shell command.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Changes the log level from ERR to DBG for element_model_recv for the
following cases:
- Element does not have the appkey for incoming message.
- Element does not have destination address for incoming meesage.
When the received message is for a group address, element_model_recv
is called for all elements on the device. One or more elements may contain
a model that is subscribing to this address. If more than one element
contains the same model. but they do not all share the same application
key as the incoming message is encrypted with, or they do not all
subscribe to the same group address, then the log will show error
message for these elements, which is misleading.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Filtering out received packets which source address matches one of our
own addresses has broken the duplicate address detection conflict
reporting.
In case Neighbor Advertisement is sent during DAD collision, the source
address of such packet might be set to the address that triggered the
collision. This address would also be set on our interface, marked as
tentative. Therefore in order to make duplicate address detection work,
we cannot filter out packets in case our own address is still in
tentative state.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A support for RDNSS option should not force DNS subsystem being enabled
in the system, especially that the option is enabled by default. It
should work the other way around - the option is supported only if DNS
was enabled by the user.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Because of include file changes, we now need to include both
hostname.h and net_if.h in the syslog logging module directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
With native_sim, this error is seen a lot when socket
service API is used.
<dbg> net_sock: get_sock_vtable: (net_socket_service):
Invalid access on sock 3 by thread 0x807a8e0 (net_socket_service)
If we just ignore the error, then we might get into forever
loop which is not good. So if this happens, mark the eventfd
fd as not pollable to basically ignore the eventfd support in
this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print also thread name when printing socket access error.
This helps debugging what thread caused it.
Lowering the Error to Debug as we could be missing vtable
for example for eventfd descriptors, this is easily seen when using
socket service API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the LLMNR responder is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the mDNS responder is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the DNS resolver is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Ensure that in LLCP reference to node_rx is cleared when
retention is NOT used, to avoid corruption of node_rx later
re-allocated
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
In case a CPR is intiated but rejected due to CPR active on
other connection, rx nodes are leaked due to retained node not
being properly released.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The ISO API and implementation have existed in Zephyr
for several years, and while not fully qualified, stable
or tested yet, it's not experimental anymore (and have
not been for a long time).
This commit removes any references to it being experimental
and instead defines it as unstable by setting the version to
> 0.1.0. 0.8.0 is being used as the initial version, as that
is what other unstable modules was defined to have as their
initial version if they were not stable (>= 1.0.0).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If bt_conn_set_state(conn, BT_CONN_DISCONNECTED) is called
while the connection is already disconnected, this triggers
a warning. This is likely to happen when bt_conn_cleanup_all
is called as part of bt_disable.
Added the state check to avoid unnecessary warnings in the log.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for bt_disable in the ISO implementation.
This involves clearing all information related to states
in the controller, such as the BIGs and CIGs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since the CSIP API expects a set member struct for nearly all
functionality, the reference to the full set member (along with
the CAS specific CSIS) should be given to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The input address originates from an RX net_buf which may
be unaligned. Consequently, word access to this unaligned buffer
can trigger an unaligned access exception on certain platforms,
such as the ARMv7 Cortex-A9.
Signed-off-by: Taras Zaporozhets <zaporozhets.taras@gmail.com>
Use the same scheme as for string descriptors. Descriptors can be added
or removed using the existend interface.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
We could reuse the BOS header, but there are parts that are only needed
in the legacy device support or used internally and the tests. Move this
parts to the appropriate places.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
It simplifies the macros to create the string descriptors. We also no
longer need placeholders for the SerialNumber descriptor when it is
generated from hwid. In the future, we can store other descriptor types
in the same list.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not use application-provided placeholder buffers. Generate
SerialNumber just before ASCII string is converted to UTF16LE. Make
dependency on HWINFO optional, but enabled by default.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move and rework string descriptor data to a separate structure so we can
share memory with another type. Also add description to the
USBD_DESC_STRING_DEFINE macro.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This is slower but should have no real effect. In the future we can
support more than ASCII7 format and store it in other memory areas.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add function to get string descriptor index and function
to remove linked descriptor from a device. This abstracts
it a bit so that the user does not need to know how it is
handled internally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
A new Kconfig option which generates syscall stubs assuming that
extensions will always run on userspace, thus simplifying linking
them, as there's no need for z_impl_ stubs (used for direct syscalls),
CONFIG_LLEXT_EDK_USERSPACE_ONLY.
While defining __ZEPHYR_USER__ could have the same effect for optmised
builds, people building extensions on debug environments - thus
non-optimised - would suffer, as they'd need to somehow make the stubs
available (by either exporting the symbol or implementing dummy stubs).
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Loadable extensions need access to Zephyr (and Zephyr application)
includes and some CFLAGS to be properly built. This patch adds a new
target, `llext-edk`, which generates a tar file with those includes and
flags that can be loaded from cmake and make files.
A Zephyr application willing to expose some API to extensions it loads
only need to add the include directories describing such APIs to the
Zephyr ones via zephyr_include_directories() CMake call.
A new Kconfig option, CONFIG_LLEXT_EDK_NAME allows one to control some
aspects of the generated file, which enables some customization - think
of an application called ACME, willing to have a ACME_EXTENSION_KIT or
something.
All EDK Kconfig options are behind CONFIG_LLEXT_EDK, which doesn't
depend on LLEXT directly - so that EDK features can be leveraged by
downstream variations of loadable extensions.
Also, each arch may need different compiler flags for extensions: those
are handled by the `LLEXT_CFLAGS` cmake flag. An example is set for GCC
ARM.
Finally, EDK throughout this patch means Extension Development Kit,
which is a bad name, but at least doesn't conflict with SDK.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
s2ram procedure used RAM magic word for marking suspend-to-RAM. This
method may not work in some cases, e.g. when global reset does not
reset RAM content. In that case resuming from s2ram is detected when
global reset occurred.
RAM magic word method is the default but with
CONFIG_PM_S2RAM_CUSTOM_MARKING a custom implementation can be provided.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This commit upgrades the LE audio API and implementation
from experimental to unstable.
LE Audio have existing for quite a few years in Zephyr
and is not going anywhere, but at the same time it still
has significant effort remaining before it can be
considered stable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Improve coap_client_cancel_requests(). Ensure it can be
called from a callback. Report error to waiting callbacks.
Clear active flag.
This is useful when the network becomes unavailable
or prior to disconnecting in order to save power.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Take card lock when running IOCTL command, to avoid race conditions that
could occur within the lower SDHC transfer implementations (as these
will be called by sdmmc_wait_ready)
Fixes#72368
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Apply the commit 21975231e2
("usb: device: cdc_acm: Prevent recursive logging loop")
to the new CDC ACM implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When CONFIG_USB_DEVICE_STACK=n then the sine wave
generator was enabled, which caused build errors.
This commit fixes those errors and also adds the
nRF5340 as a build target for the USB tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The mic_state is a guarded field in event_done_extra where it was
accessed outside of its guard.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
SD ops card_read() implementation does not need to unlock mutex, as this
is managed by the calling function card_write_blocks. Remove this stray
k_mutex_unlock() call.
Fixes#72287
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Reword frequency and timing selection logic for SDIO framework so that
the maximum supported timing mode between the card and host will be
selected, even if the maximum frequency supported by the host is not
equal to the maximum frequency for that mode.
Also, resolve an issue where a host and card combo only supporting HS
mode or worse would still use legacy timing mode, because the CCCR flags
were not being checked when checking if HS bus speed could be used.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SDMMC framework frequency and timing selection logic has several
longstanding issues, including:
- requiring that SD hosts support the maximum frequency possible for a
given UHS mode in order to apply that timing
- selecting SDHC_TIMING_SDR25 for high speed mode, when SDHC_TIMING_HS
would be correct
Rework the frequency and timing selection logic within the SD framework
to resolve these issues.
Fixes#52589Fixes#67943
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The default stack size of RFCOMM DLC is 256.
The default value is sufficient for basic operation.
If more stack space is used (such as call function printk)
in context of callback disconnected of RFCOMM DLC, the
default stack size is not sufficient.
Add a configuration BT_RFCOMM_DLC_STACK_SIZE to configure
the RFCOMM DLC stack size.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
To avoid the case that CONN_TX is available but RFCOMM_TX is
unavailable, set the default value of BT_RFCOMM_TX_MAX to
BT_CONN_TX_MAX.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The maximum data length of event packet is 255 for BR/EDR.
Such as the data length of event Remote Name Request
Complete is 255.
Set BT_BUF_EVT_RX_SIZE to 255 to avoid error "Not enough
space in buffer" from bt_hci driver.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Lock the scheduler to ensure that the context is not preempted before it
is fully initialized.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
There are controllers with capability to detect VBUS state change. This
can be used in a generic application to explicitly handle the VBUS
detected event after usbd_init() and for example allow the PMIC to
detect to what type of port device controller is connected.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
For the simple events, do not check whether the device driver and stack
are marked as initialized. USB device notification will reschedule
delivery if the stack is not yet marked initialized.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since no threads are waiting for the FIFO and we do not need any k_fifo
features, we can just use slist.
Some notifications (caused by interrupts), especially "VBUS ready", can
be triggered very quickly right after UDC initialization if the USB
controller is already connected. Depending on the global thread
configuration, messsage publishing work can be executed before the
context is marked as initialized. Use delayed work to reschedule
publishing when the context is not initialized.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fixes remote address for ping before upload. This caused the ping in zperf
upload to timeout as shown in the following output:
```
uart:~$ zperf udp upload 2001:db8::2 5001 10 50 1M
Remote port is 5001
Connecting to 2001:db8::2
Duration: 10.00 s
Packet size: 50 bytes
Rate: 1000 kbps
Starting...
ping 2001:db8::2 timeout
Rate: 1.00 Mbps
Packet duration 390 us
```
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/68674
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Allow Block-Wise writes to resources that have enough buffer for
the whole content. Calculate the offset before calling the
content specific write handlers when callback is not set.
Previously only resources with post-write callback were able to
assemble the content.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When Block-Wise transfer restarts, the post-write callback should
receive some indication that the block is actually a beginning of new,
instead of part of previous transfer.
Fixes#71351
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The callback is only ever called when we received a
notification from the BASS server that the receive state is
removed, which cannot contain an error code.
Thus it does not make sense for the callback to have an
error code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Call `getopt_init()` to reset `state->optind` instead of directly setting
`optind = 1`. The `getopt()` function uses `getopt_state` from
`getopt_state_get` for state handling, so `getopt_init()` should be called
to correctly run the command again.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
According to the `SHELL_CMD_ARG` macro, the `mand` argument of `cmd_dump`
should be 5, including the command name itself, `dump`.
Meanwhile, the `opt` should be 2, as this value describes the optional
field, which is [-w <width>].
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
For vendor datapaths that do not use a netbuffer to write SDUs
into, the callee of sdu_write currently has to keep track itself
of how much data has been written to the current SDU; This is wasteful
since ISOAL already keeps track of that. Add an sdu_written parameter
to the callback to inform the callee how much has been written to the
current SDU already so the callee can write using the correct offset
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add initial HID device support. Unlike the existing HID implementation,
the new implementation uses a devicetree to instantiate a HID device.
To the user, the HID device appears as a normal Zephyr RTOS device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If the recipient is not the device then it is probably a
class specific request where wIndex is the interface
number or endpoing and not the language ID. e.g. HID
Class Get Descriptor request.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This function was used to shortcut HCI for combined host + controller
builds. It doesn't provide much value and adds complexity to the HCI
driver interface, so just remove it. This means vendor-specific HCI
commands is now the only way for the host to access the same
information.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Enabling vendor-specific extensions also implies support for vendor
events, so a separate Kconfig option for that is unnecessary.
One small additional thing this requires is the use of the
__maybe_unused annotation, since there's no-longer a single Kconfig
option that the controller hci.c can use to know that the vendor event
helper symbols are needed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
When the network inteface goes operational DOWN (for example cable
unplugged), clear "joined" flag on all registered multicast addresses,
so that MLD report is sent for them when the interface goes back up.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When bringing interface down, all IPv6 multicast addresses are removed
from the interface. However, when the interface was brought back up,
rejoin_ipv6_mcast_groups() would look only for solicited node mcast
addresses already present on the interface. In result, after going back
up, the interface was missing solicited-node mcast addresses for those
unicast addresses, that were already present on the interface when
bringing up.
As net_ipv6_mld_join() does similar checks to skip MLD when not needed,
we can just skip the lookup when rejoining, and use already defined
join_mcast_nodes().
Additionally, check for IPV6 and NO_ND flags on the interface before
attempting to add the address back, those multicast addresses are not
needed if ND is disabled on the interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a network interface is brought down and back up, DAD was not
performed for link-local unicast address.
This happens because the logic in the network interface code assumed
that DAD for link-local address is triggered when the address is added,
and it's explicitly omited when looping over IPv6 address. This wasn't
the case however when interface was brought back up, as the address was
already present on the interface, hence DAD skipped.
In Linux, the link-local address is removed from the interface when the
interface is brought down. Such approach solves the issue described,
hence implement it in a similar way in Zephyr.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is no need to check our own context when going through
the used ports in the system. This prevents error when binding
in some corner cases.
Fixes#72035
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The new command is "net http" which shows all services and
related resources defined in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for receiving audio data from e.g. a PC
over USB and LC3 encode it before sending it
on BAP audio streams.
This refactores the entire TX path, as it has moved
from only support the sine wave generator, to also
supporting USB.
The encoding and sending of data is now in it's own
thread, instead of relying on the system workqueue thread
and k_work items.
Several other refactors have taken place to reduce lines
of codec (such as the introduction of the bap_foreach_stream
function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Doing a normal close for a websocket does not close the underlying
real socket. If we do not have fd for the real socket, then it is
not possible to fully close a websocket connection. As we are allocating
a websocket using websocket_register() in HTTP server use case,
create a websocket_unregister() that will close both the real
socket and the websocket socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
There are use cases where it's beneficial to trigger the log
thread to process log messages as soon as able instead of waiting
for the processing timer or threshold triggers. An example would be
to flush the log buffer before entering the idle thread after
forcing a system power state.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Return an error if the provided cache configuration is not large enough
to hold a single entry. An empty `active` and `idle` list causes NULL
dereferences in `log_cache_get`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Introduce z_page_frame_set() and z_page_frame_clear() to manipulate
flags. Obtain the virtual address using the existing
z_page_frame_to_virt(). This will make changes to the page frame
structure easier.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Calling bt_disable in system workqueue context while BLE connected may
lead to calling wait_for_tx_work in this context. Fix check in code to
avoid assertion failure.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Dynamic code execution applications not using LLEXT for "extension"
loading are subject to the same linker optimization symbol resolution
issue described in commit 321e395 (in summary, libkernel.a syscalls
not used directly by the application result in weak symbol resolution
of their z_mrsh_ wrapper).
To support usecases where an application is using alternative methods
to load and execute code calling syscalls (likely from userspace) or
is using a mechanism where the linker may not be aware, the configuration
option has been decoupled from CONFIG_LLEXT (who is now a selector) to
KERNEL_WHOLE_ARCHIVE.
Signed-off-by: Daniel Apperloo <daniel.apperloo@intel.com>
Empty frames are allowed by the LoRaWAN protocol and are actually useful
to open new RX slots or flush MAC commands in stack. Therefore allow the
data pointer to be NULL if len is 0.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As part of ongoing work to move away from TinyCrypt and towards PSA
(#43712), make fs_mgmt use either PSA (when available) or MbedTLS
(as a fallback) for SHA-256.
The use of PSA is guarded by CONFIG_MBEDTLS_PSA_CRYPTO_CLIENT
which requires a locally-built PSA core for devices without TF-M.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
It is meant specifically for configuration of the PSA crypto library.
The underlying PSA configuration items are guarded by the condition
that a PSA crypto provider must be present, which is the case when
either TF-M is in use or MbedTLS's PSA core is built as part of
the application image.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
When using the CAP initiator shell AC commands, the channel
allocation were not done correctly, leading to cases where
we attempted to set e.g. 2 LEFT streams for the same device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add option for zperf tcp upload that will enable periodic result reporting.
This is useful for monitoring performance swings during a longer session.
Signed-off-by: Adam Matus <adam.matus@nxp.com>
TCP nodelay option is part of zperf upload params, but was not being
set in common zperf_prepare_upload_sock function. Move it there
to align with how other options are set.
Signed-off-by: Adam Matus <adam.matus@nxp.com>
TLS socket have now been in Zephyr for a few years already and are
widely adopted across the codebase. Given above, they should no longer
be considered an experimental feature.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make `bt_hci_cmd_send_sync` return `-EACCES` when receiving
`BT_HCI_ERR_CMD_DISALLOWED`.
Update some tests that were expecting `-EIO` when
getting `BT_HCI_ERR_CMD_DISALLOWED`.
Add a warning in `set_random_address` when getting that new error. This
is done in case someone try to set a new random address while legacy
advertising, scanning or initiating is enabled. This is illegal behavior
according to the Core Spec (see Vol 4, Part E 7.8.4).
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename struct bt_hci_iso_data_hdr to bt_hci_iso_sdu_hdr, and
struct bt_hci_iso_ts_data_hdr to bt_hci_iso_sdu_ts_hdr.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The `cpu.h` is meant to be a hack around Zephyr's dependencies
for unit-test, relocate it to a folder that's included only by
unit-test.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
In ull_disable, it is imperative that the callback is set up before a
second reference counter check, otherwise it may happen that an LLL done
event has already passed when the disable callback and semaphore is
assigned.
This causes the HCI thread to wait until timeout and assert after
ull_ticker_stop_with_mark.
For certain compilers, due to compiler optimizations, it can be seen
from the assembler code that the callback is assigned after the second
reference counter check.
By adding memory barriers, the code correctly reorders code to the
expected sequence.
Signed-off-by: Morten Priess <mtpr@oticon.com>
According to the RFC, MODE_IS_INCLUDE/MODE_IS_EXCLUDE codes should be
used while sendling Multicast Listener Reports in response to a query.
When performing a transition between states (e.g., when joining or
leaving a multicast group) CHANGE_TO_INCLUDE_MODE/CHANGE_TO_EXCLUDE_MODE
have to be used.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
From RFC:
* "source list" is an unordered list of zero or more unicast
addresses from which multicast reception is desired or not desired [...]
It means that there is no need to add any special address to specify
"block all" and "allow all" states explicitly. This commit removes the
unnecessary addition.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
I got some feedback about confusion as to why the bt_addr types are not
packed. This commit adds a note about it.
This commit also adds a check for the alignof of the structs to verify
the statement 'their members are bytes or byte arrays' to thoroughly
prove that the struct is effectively as-if packed.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The shell UART TX code would only disable the TX IRQ when no data was
available in the TX ring buffer. However, it should also disable the IRQ
when all data retrieved from the buffer has been written. Otherwise it
will just result in another immediate TX IRQ which results in the IRQ
finally being disabled.
For this to work, since ring_buf_get_claim may not always return all
available data in the ring buffer on a single call, we need to loop
until either no data is left in the ring buffer or the UART was unable
to consume any of the data.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
MBEDTLS_PSA_CRYPTO_C and MBEDTLS_USE_PSA_CRYPTO are 2 different
things and the former should not automatically enable the
latter. The reson is that the user might want the MbedTLS
PSA crypto toolbox to be built, but at the same time he/she
does not want TLS/DTLS (and other intermediate modules such
as PK, MD and Cipher) to use PSA APIs.
For this reason this commit introduces a new Kconfig option
named CONFIG_MBEDTLS_USE_PSA_CRYPTO to enable the corresponding
build symbol. By default USE_PSA_CRYPTO is disabled. It is
only explicilty enabled in tests/samples that were previously
setting CRYPTO_C (since in those cases USE_PSA was set).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
When BUILD_WITH_TFM is enabled we can dispatch hash computation
to TFM. This allows to remove the built-in support of SHA256 from
the non-secure side (if it's not used for any other purpose, of course).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Moving toward the adoption of PSA crypto APIs, TinyCrypt is going
to be deprecated so we can remove it in favor of newer APIs.
Moreover tls_credentials is mostly meant to store data in the
protected storage meaning that there is a TFM implementation
providing this service. The same TFM can of course be used to
compute sha256 hashing thus saving memory footprint on the NS
side by removing TC.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
When using the TLS_CREDENTIALS_BACKEND_PROTECTED_STORAGE there is
BUILD_WITH_TFM enabled which means that we can take advantage of
TFM (thorugh PSA interface) to compute the SHA256 hash.
This removes the need for the built-in implementation of
mbedtls_sha256() on the non-secure image (unless it's used somewhere
else, of course) and therefore it helps in reducing the memory
footprint.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add support for gratuitous ARP transmission by Zephyr network stack.
This allows to prematurely fill the peer ARP table, so there's no need
to send an explicit request when peer needs to send an actual packet.
The gratuitous ARP is send when the network interface is brought up
(joins the network) or a new IP address is added. The gratuitous ARP
request is also sent periodically, with a configurable interval time.
The gratuitous ARP should also be sent whenever MAC address of the
interface is changed, but as Zephyr only allows to do this when
interface is down, this is already covered by the first case (interface
brought up).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement LL_ASSERT_INFO1 and LL_ASSERT_INFO2 for triggering assertions
with parameter information provided for vendor core dump.
Adds Kconfig CONFIG_BT_CTLR_ASSERT_VENDOR by which the new LL asserts
map to BT_ASSERT_VND macros, which shall be implemented in the
debug_vendor_hal.h of the platform. If not enabled, LL_ASSERT_INFO will
map to existing BT_ASSERT_MSG with parameters printed.
Add use of LL_ASSERT_INFO2 where ull_ticker_stop_with_mark() result may
assert.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fixing the websocket command output to align the fields and
printing interface index instead of a pointer value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add socket obj_core support to websocket so that the socket
information can be viewed by "net sockets" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
After upgrading the HTTP connection to websocket, call the
application registered callback to transfer the ownership of
the socket to the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the other end closes the connection, it is not exactly an
error so downgrade the print to debug level.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The http_server needs a way to bind a websocket socket to the
upgraded http connection socket. So websocket_register() is used
for that.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use normal "config" in order to avoid this error from compliance
check script:
Found pointless 'menuconfig' symbols without children.
Use regular 'config' symbols instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow connection to be upgraded from HTTP/1.1 to websocket.
This commit does nothing yet with the upgraded connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Check what kind of upgrading we are doing and return error
if we receive upgrade that we do not support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This change works around the issue with the semaphore timeout during
the Bluetooth HCI driver initialization when the bt_enable function
is called in the context of the System Workqueue thread. This issue
only affects platform that use the IPC service and its ICBMsg backend
(e.g. the nRF54H20 DK target).
The bt_enable function, when called in the System Workqueue context,
results in a deadlock, as the waiting semaphore of the Bluetooth HCI
driver times out:
bt_hci_driver: Endpoint binding failed with -11
During the Bluetooth HCI driver open operation in the context of the
bt_enable function, the driver code waits using the semaphore for the
endpoint binding process of the IPC service module to finalize. The
issue occurs when the waiting occurs in the System Workqueue context.
The ICBMsg backend from the IPC service schedules a system work during
the endpoint registration, in which it finalizes the binding operation
- also in the System Workqueue context. As the Bluetooth HCI driver
with its wait operation keeps the System Workqueue context busy, the
endpoint binding cannot be completed by the ICBMsg backend before the
HCI driver semaphore timeout.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
`OPENTHREAD_PLATFORM_KEY_REF` should not be selected for RCP
architecture, as keys are handled on host's side and passed to
device over Spinel, and therefore they cannot be exported
on platform from reference with PSA Crypto API.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Part of the initialization is done in the static usb_device_init()
function called by SYS_INIT(). We can move part of it, which initialize
the descriptor and calls usb_set_config(), to usb_enable(). This allow
some usb_get_device_descriptor() dependencies called at application
desired point.
Also make sure that usb_fix_descriptor() is called only once.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
These relocations are needed e.g. when an LLEXT is built from
multiple files and they share data objects.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add missing break inside switch statement to allow UDC context to
indicate that current operating speed is High-Speed. Due to missing
break statement, the stack always assumed Full-Speed.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Two issues fixed:
When pull-context is created, it does not have to wake up the RD
client context. Ignore the EPERM warning.
When new pull-context creates a new socket, sometimes socket-loop
gets to recvfrom() before we have set O_NONBLOCK on the socket.
So use ZSOCK_MSG_DONTWAIT on zsock_recvfrom() so it does not
block the socket loop.
Fixes#71450
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Modem chat scripts should be able to add a script command which
is simply a delay. The validation of chat scripts currently
disallows chat script commands which only have a timeout set.
Update modem_chat to allow modem chat script commands which
only have a timeout. Additionally do a bit of cleanup to
remove duplicate code.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
net_buf_alloc(K_FOREVER) can now fail (if run from the syswq). Propagate to
the caller instead of asserting.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
It may happen that the interface is up but not yet running
when we issue the rejoin_ipv6_mcast_groups(). This can be
fixed by calling this function again right after the iface
is set to 'running' state in the notify_iface_up handler.
Signed-off-by: Marcin Kajor <marcin.kajor@nordicsemi.no>
This sets the number of arguments for SMF_CREATE_STATE() to always
be the same, independent of the selected Kconfig options.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
The `BT_DEBUG_*` Kconfig symbols have been deprecated for more than 2
versions, remove them.
Update code that was still using them.
Remove the Bluetooth specific `Kconfig.template.log_config_bt` and use
`Kconfig.template.log_config_inherit` from the logging subsystem
instead, now that the legacy symbols can be removed.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add the CAP commander reception start procedure which starts reception
on one or more CAP acceptors
With the implementation of broadcast reception start procedure we also need
some mockups for unit testing
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commit fixes the incorrect include path for the fuse library.
pkg_search_module populates the <XXX>_INCLUDE_DIRS cmake var.
Signed-off-by: Russ Webber <russ@rw.id.au>
When calling net_if_get_default(), print a warning if no
network interfaces are found. This helps debugging mysterious
crashes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When trying to get IPv6 prefix, if there are no network interfaces
then the net_if_get_default() will return NULL but we should not
crash at that point but return gracefully.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Making default preferred time much closer to default valid time
so that the served addresses are much shorter time in deprecated
state where they cannot be utilized. This is important in Zephyr
as there are limited number of IPv6 addresses that can be allocated
to the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The local address used for established TCP socket needs to be
dig out from TCP internals and not from context->local.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We usually cannot use context->local for established TCP connections
because the local address is not updated for TCP if we are bound to
any address. So create helper that try to figure out the end point
addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for IPv6 Source Address Selection defined in RFC 5014.
This commit does not add any address selection support to getaddrinfo()
as described in the RFC. The AI_EXTFLAGS symbol and also the ai_eflags
to hints is added but they are not used by the code.
The public/temporary address selection is only done internally by
the net_if_ipv6_select_src_addr_hint() according to flags set by
setsockopt().
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When printing IPv4 and IPv6 address information in "net ipv4" and
"net ipv6" commands, print also reference count of the IP address.
This is useful for debugging purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add reference counting to network interface address (for both
IPv4 and IPv6) so that the address is not removed if there are
sockets using it. If the interface address is removed while there
are sockets using it, the connectivity will fail for the said
socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add events to be generated when privacy extension is enabled
or disabled, or when allow/deny filter is added or deleted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When executing "net iface" command, print current status of
IPv6 privacy extension if it is enabled in config file.
The "net ipv6 ..." command prints IPv6 privacy extension
information, and can add or delete IPv6 prefix filters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If IPv6 privacy extension is enabled, then we need to select
proper public or temporary IPv6 source address when sending the
packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This creates support for IPv6 privacy extensions which is described
in RFC 8981. This will also add API that can be used to add IPv6
prefixes to a allow or deny list privacy extension filter.
The code will create temporary IPv6 addresses from prefixes that
are advertised by Router Advertisement messages. The temporary
IPv6 addresses are then expired according to lifetime and removed.
Fixes#9349
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If IPv6 address expires and moves to deprecated state, then
send a mgmt event so that listeners can act on it.
One such action is to close a socket bound to that source address
so that the address can be released.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit adds transmission of MLDv2 reports whenever a multicast
routing entry is added or removed when suitable (it checks if the
given interface itself has joined the group).
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commit introduces a new option CONFIG_NET_MCAST_ROUTE_MLD_REPORTS
which appends multiacst routes to MLDv2 reports. These records are
intended to inform reports' recipients about potential listeners on
the other interfaces.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The coap_client lib only handled "one-shot" requests properly. This
patch allows it to keep listening for additional responses to a request,
if the request was made with the CoAP OBSERVE option appended.
An API for canceling such requests is also added.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
The size field in net_buf should not be used directly as then
the optional headroom will not be taken into account.
There is the net_buf_max_len() API that should be used instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
Spell checking tools do not recognize "iff", replace with "if and only if".
See https://en.wikipedia.org/wiki/If_and_only_if
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Kconfig option to enable object version reporting should
be moved into sub section "Engine features" so
it does not clutter up the main LwM2M menu.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Due to recent changes in hostap to move few buffers from heap->stack (to
improve the reliability of allocations) this has increased the stack
size and with another recent change to increase the max polling sockets
this puts over the 4096 stack size for net_mgmt causing stack overflow.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The bcdUSB value 0x0210 defined in USB 3.2 Specification indicates USB
3.2 device operating in one of the USB 2.0 modes. USB 2.0 Link Power
Management Addendum defines bcdUSB value 0x0201 to indicate that USB 2.0
device supports the request to read the BOS Descriptor.
The main difference between bcdUSB 0x0210 and 0x0201 is that the USB 3.2
device must support LPM, while USB 2.0 devices can (but are not required
to) support LPM.
The difference is respected by USB 3 Gen X Command Verifier (2.3.0.0)
Chapter 9 Tests [USB 2 devices], where the test behaves as follows:
* For bcdUSB 0x0200:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.00.
DUT is NOT compatible with LPM.
LPM is NOT required for DUT
LPM is only supported in USB version 2.01 and above.
* For bcdUSB 0x0201:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.01.
DUT IS compatible with LPM.
LPM is NOT required for DUT
USB 2.0 Extension Descriptor bmAttributes:
LPM Capable = 0
BESL and Alternate HIRD Supported = 0
Baseline BESL Valid = 0
Deep BESL Valid = 0
Baseline BESL: 0d
Deep BESL: 0d
LPM is not supported
* For bcdUSB 0x0210:
Checking Device Under Test for LPM L1 Compatibility...
USB version of device is 2.10.
DUT IS compatible with LPM.
LPM IS required for DUT
USB 2.0 Extension Descriptor bmAttributes:
LPM Capable = 0
BESL and Alternate HIRD Supported = 0
Baseline BESL Valid = 0
Deep BESL Valid = 0
Baseline BESL: 0d
Deep BESL: 0d
(USB: 9.6.2.1.6) Bit 1 in Attributes field of a USB 2.0 Extension
descriptor returned in response to a GetDescriptor(BOS) request
must be 1 for LS/FS/HS devices that support LPM L1.
The test fails when LPM bit is not set in USB 2.0 Extension Descriptor
only when bcdUSB is 0x0210. The test failure was incorrectly fixed in
commit 312429be3c ("usb: samples: Add Extension descriptor to webUSB
sample."). Properly fix the issue by changing bcdUSB to 0x0201 and
removing the false LPM support claim.
The false LPM claim was leading to device ceasing to work after some
time if there was no traffic from host to device (when the host is
likely to have executed the LPM L1 transition that was not properly
handled by the device).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When PPP moves to the 'Closing' state it sends up to configured number
of 'Terminate-Request' packets. It only moves to the 'Initial' state,
after running out of retransmits or when it receives a 'Terminate-Ack'
packet.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
The bt_cap_common_discover function relied on a global variable
used to indicate that a discovery was in process.
This global variable prevented multiple discoveries to take place
on multiple ACL connections, where the intention was to stop
multiple discoveries on the same ACL.
This has been fixed by moving the variable into the
struct bt_cap_common_client, so that it applies per
connection, rather than a global check.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moved the busy flag and the GATT paramters to the
individual CSIP Set Coordinator instances.
This allows to use multiple instances in parallel,
and thus in turn allow CAP to do things in parallel.
This commit has been done with minimal amount of changes,
even if there are multiple pieces of code that could likely
be refactored to be better.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Callback was always called with NULL conn. Now it is called with proper
pointer or NULL conforming to description.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
As documented in bt_le_scan_update(), the host may start scanning
automatically for various reasons.
Until now scanning was only done on 1M PHY, making it impossible
to use auto-connect/sync establishment if the advertiser was using
Coded PHY as its primary PHY.
Auto-connection would never work. Sync establishment would work if
the scanner was started by the application.
This commit fixes this by instructing the controller to scan on
both 1M and Coded PHY if the controller supports Coded PHY.
The application may see increased power consumption as a result
of this change as the controller may now spend 2*scan_window
listening for advertising packets.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add channels mask configuration for LoRaWAN, creating a request for
LoRaMAC. This change is needed because using LoRaWAN with ABP
activation without configuring channels mask will provide no acceptable
channels on data transmit, causing data loss.
Signed-off-by: Jeferson Fernando <jeferson.santos@edge.ufal.br>
1) Replace master/slave in API for new terms in eSPI spec 1.5
2) Reflect eSPI VW change and macro changes across eSPI drivers
3) Update terms in eSPI driver sample and eSPI test driver
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This patch adds names to the threads created by `mbox_init` via
`k_work_queue_start`. The name of the thread is the same as the name in
the device instance.
The main reason for this has to do with how `mcumgr` reports [thread
information](https://docs.zephyrproject.org/latest/services/device_mgmt/smp_groups/smp_group_0.html#task-statistics-command).
Specifically, data about threads is sent in a CBOR encoded map where the
map keys are the thread names (at least in the default configuration). If
there's more than one IPC channel defined (one example of this being
`samples/subsys/logging/multidomain`), both threads would be created
with an empty name and `mcumgr` will only return the data associated
with the thread created by the last call to `mbox_init`.
Signed-off-by: Bogdan Marinescu <bogdan.marinescu@gmail.com>
This service receives fragmented data (usually firmware images) and
stores them in the slot1_partition in the flash.
Also update CMakeLists.txt in loramac-node module to be able to use
FragDecoder.c
Signed-off-by: Martin Jäger <martin@libre.solar>
Use reschedule margin as minimum ticks_slot when ticker with
reschedule expires. This will ensure not too many unreserved
tickers expire in close proximity that can lead of pile up
of CPU processing time and eventually causing timeout
callbacks to be delayed. This mitigate possible LL asserts
due to overhead in start of radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable use of ticker slow window yield feature under mesh
usecase. This is make sure scan window either slides within
is window or skips to next interval so that it does not
lead to advertising event being skipped.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix short prepare preempt timeout start, such that if there
are any normal prepare before a short prepare in the
pipeline, then find the short prepare and start its preempt
timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add prepare pipeline assertion checks to detect faults
like stopping preempt timeout without prior start. Also,
check if the preemptor param is correct when preemption
is performed. Check that the prepare pipeline is not
infinitely looping.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add assertion check for use of scan aux context so that
scan aux context is not assigned again while there is
already an existing LLL scheduling in use by the scan
context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_EARLY_ABORT_PREVIOUS_PREPARE to setup new
shorter preempt timeout irrespective of whether there
is a previous prepare enqueued in the prepare pipeline.
Relates to commit d573951f0d ("Bluetooth: Controller:
Revert back early abort of previous prepare").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After the changes introduced by #50816 the UpdateHub could not decode
anymore the JSON object. This introduce missing parsing definitions
to allow JSON parser undertood the correct UpdateHub probe object.
Fixes#69297
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The lorawan subsystem do not use settings handler, and instead uses
individual calls to settings_save_one(). With this strategy there is no
need to call settings_save() at the end.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When running multiple subsystems or applications on a MCU, the usual
strategy is to use different settings subtrees.
The API provides a way to load or commit a subtree, to avoid adding
dependencies between subsystems or applications, but lacks the way to
save a subtree only. Fix that by adding a settings_save_subtree()
function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit updates models metadata API to simplify the usage and
removes the metadata pointer in health server model context.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Add an extra "usage=%d" to the device status to show the current usage
counter when PM runtime is enabled.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a shell_device_filter variant of the shell device lookup helper that
takes a callback as an argument. This allows more complex filtering on
the device than the existing name prefix.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Original code developed as a GSoC 2023 project by Emna Rekik.
Code refactored in order to provide better bisectability
as the origical commits were not bisectable.
The server supports static and dynamic resources, managed by
HTTP_SERVICE/HTTP_RESOURCE macros.
Fixes#59685Fixes#59686Fixes#59688Fixes#59690Fixes#59670Fixes#59700Fixes#59684Fixes#59693Fixes#59693Fixes#59694Fixes#59699Fixes#59696Fixes#59688Fixes#59690Fixes#59670Fixes#59700Fixes#59685Fixes#59686Fixes#59688Fixes#59691
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add HTTP/2 helper libraries to encode and decode HPACK encoded headers,
according to RFC7541.
HPACK string encoding requires to support certain set of Huffman codes,
therefore implement Huffman encoder/decoder as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
In case of successful submission, the reference shouldn't be put down,
this only should done on error cases.
As reference is put down on success, during the buffer unref, no action
is taken due to an uint8 overflow (ref is now 255), so, the buf->frags
isn't cleared properly and the next time the frags is used and when L2
inserts a second frag, the first head frag and next frag are same (due
to buffer re-use) causing an infinite loop in either net_buf_frag_last
or net_pkt_get_len.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
We can't enable device runtime power management in a device that is
set busy since it may suspend this device.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Unicast RX stats
It represents total number of unicast (any type data, action or
any other unicast frames) frames received at firmware level.
The actual frames passed to host will be different as firmware
may drop packets or some packets may be dropped because of
errors.
Unicast TX stats
Transmission side the unicast packets count states the packets
handed over to firmware. The stats taken at firmware level.
Actual packets transmission may vary depending upon various factors.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Add USB out support for the BAP shell, so that decoded LC3
data can be sent to the host (e.g. a PC).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The volume controller always set the busy flag in
bt_vcp_vol_ctlr_set_vol, where it should only set it
if the GATT operation succeeds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Send a `READ_MAX_ADV_DATA_LEN` command to the controller at the
initialization of the host to fetch the maximum advertising data length
the host can accept.
This is done because even if the Zephyr controller provide the
`CONFIG_BT_CTLR_ADV_DATA_LEN_MAX` Kconfig symbol, other controllers may
not have such Kconfig symbol. So this is a way for the host to be more
controller-agnostic and provide useful feedback to the users.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Commit adds using host\controller based random number
generator instead of zephyr driver.
No mesh dependency anymore on zephyr system
random driver.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This function is used in many places, but just by reading its
name it is not obvious why it is needed.
By adding some documentation it will hopefully become a bit more
clear that this function is mainly used for auto connection
establishment.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This line was clearly intended to check for the value returned by
ad_init(). The ad_len is unsigned, so checking for a negative value
showed up in a recent Coverity run (no GitHub issue for it yet).
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Update the documentation of `BT_CTLR_ADV_DATA_CHAIN` Kconfig symbol to
say that it's only supported in *non-connectable* extended advertising.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
We can (and do) open multiple channels with a single L2CAP command. If the
remote doesn't support dynamic channels at all, then it sends back a
REJECT_RSP.
We only destroyed the first channel that matched the command PDU
identifier. Fix that and remove all channels that match.
Also add a test that verifies the patch.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Instead of having the boards override the default
in their Kconfig.defconfig
let's just default to IMMEDIATE logging mode in the main
definition if we are building for a ARCH POSIX board.
This avoid issues w dependencies being lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Commit fixes bug if dfu server failed to deliver
apply response it gets stuck in applying phase.
In this phase it skips all further client attempts
to apply image again.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Backend index must also be incremented, when backend is not an autostart
backend. Otherwise, the resulting bit field can not be used to address
a backend by index; autostart field would have to be taken into account.
Signed-off-by: Torsten Robitzki <Torsten@Robitzki.de>
Ignore failure to Broadcast ISO remove data path when
terminating a BIG without a data path being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple advertisers overlap over time, the random
delay being applied need many ticker operation context.
This causes the ticker_update interface to return error
causing assertion in the Controller.
This is fixed by not applying random_delay value to the
overlapping advertiser that does not get to use the radio.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for a "pm" shell command to trigger suspend/resume as well
as runtime-get/put on devices. This is useful for testing during driver
development.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In the follow expression:
cyc_evt += UINT32_MAX + 1U
first it is evaluated (UINT32_MAX + 1U), since both types
interpreted as uint32_t, this operation causes an overflow resulting
in 0U.Then we have
cyc_evt = (uint64_t)cyc_evt + 0U
Fix it casting of the operands in the first operation to uint64_t.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Refactor only. The surrounding ifdefs are intentionally not changed in
this patch. They will be in the near future.
Rename the pool and generalize the documentation to allow using this
pool for other events that fit the same criteria. This pool can be used
for any buffer that is processed synchronously, without negatively
affecting 'num complete' messages. E.g. 'cmd complete/status' can be put
in this pool already.
We will be working towards making the host process all event buffers
synchronously. This is because events have no dedicated flow control,
and discarding events in the driver without informing the host creates
problems. Discarding should instead happen in the host higher layers
when unavoidable.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
There was a typo in Kconfig check (missing CONFIG_ prefix) which
resulted in not setting OACP_FEAT_BIT_CRC bit in features.
This also resulted in checksum feature being disabled due to check
in bt_ots_init().
This was affecting OTS/SR/OASP/BV-03-C qualificatio test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
We were missing a helper function that can be used to check
whether the given function is the virtual VLAN interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As per the BAP spec, the scan delegator device should add the BASS service
data in the extended advertising data when it requests a broadcast
assistant to scan for it. For testing purposes that's usually the case
with the shell, extended advertising data shall be populated with the
BASS service data.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
I am using the tracing module using the RAM backend on a system with
limited RAM & a buffer that can only store 300ms of tracing data. Current
tracing module starts recording during boot-up & we run out of memory prior
to executing code we actually want to trace.
By reseting buffer metadata here, I can call init() at an arbitrary point
of program execution & the tracing module will reset & start tracing.
I tested on E2E on an ARM M-class MCU by calling init & then reading
buffered tracing data via GDB
Signed-off-by: Galen Krulce <gkrulce@meta.com>
Similar to logging module, allow application specific extension of
shell fprintf APIs at a macro level.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
Improve the default serial backend init level.
The documentation says to be bigger than the init level of the serial
device used. Since serial devices default to the kernel device init
level (50) then put this to default of application level drivers (90).
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Add aux offset population assertion check, to ensure the
aux offset calculation is completed before the primary
PDU is setup for transmission.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Commit fixes behavior when provisioning protocol accepts
incoming transaction before ongoing tx transaction is
still active (device didn't receive acknowledgement yet).
Incoming data are ignored until ack is not received.
Specification:
5.3.3 Generic Provisioning behavior
...
If the sender receives a Transaction Acknowledgement
message, then the transaction has completed.
If the sender receives a message with other PDU types,
then the message shall be ignored.
...
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Those helpers allow to define some typical kinds of chat matches and
scripts with more ease/less boilerplate.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
There have been to problems with the code where zcbor_bool_encode
has been fed value instead of expected pointer and the result
of previous zcbor_encode operations has not been taken to evaluate
value of ok status.
The change also replaces usage of #if IS_ENABLED with #ifdef, as
IS_ENABLED should not be used outside if().
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Use lock while accessing nm data.
One of the use case is while setting regulatory, it accesses nm data,
while from some other place also it can be accessed same time.
Protected the nm data processing.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Work items on the syswq should always run-to-completion.
Override the timeout value to always be K_NO_WAIT.
Allocating with K_FOREVER leads to deadlocks if the freeing also happens
from the syswq. Non-zero timeouts are also not nice for the other users
of the syswq.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Even though we are passing mandatory args from the shell registration,
due to use of getopt the check can be bypassed without the hyphenated
options.
So, enforce and fail if mandatory parameters aren't passed through
getopt.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Change default to using advertising coding in ACL connection
when establishing connections on Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing check for Coded PHY support when creating
extended advertising set.
Added a fallback in Controller for upper layers requesting
Coded PHY while Controller is implemented without Coded PHY.
In this case, 1M PHY will be used in extended advertising
for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a config that enables sending the object version for all objects.
According to LwM2M specification v1.0 and v1.1, non-core object versions
other than 1.0 'must' be provided, while all other versions 'may' be
provided. With specification v1.2, a client 'can always attach Object
Version Information'. Or in other words, it is OK to always report the
object version with all specifications.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
Ignore LE 2M PHY being set in Initiating_PHYs of the
LE Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adapts flash writing for BLOB IO to RRAM. The previously used write
block alignment is not needed for RRAM.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
An audio stream is unidirectional, so it's always either
TXing or RXing, so the fields can safely be moved to an
enum.
The struct now has both a is_rx and is_tx field. The reason
why two bools are being used, is that the both of them may
be false (we need 3 states).
All access to the rx and tx structs in the union shall be
guarded by these fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We could start executing the work item after the channel has been
disconnected or destroyed, due to a race condition.
Double-check we are connected before attempting to send data.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This check is repeated many times in `gatt.c`, with various comments.
This patch refactors these occurrences into a named function.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/41789
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
We can't just keep blocking the syswq, people be mad.
Override the timeout value so we always have K_NO_WAIT.
Also print a message to whomever's listening.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
OTS requires that indications about state change are sent after
response to ATT Write.
OTS Specification p.4.4.4.: "An OLCP or OACP operation is started
when the ATT Write Response is received from the Object Server as
a result of the Object Client writing an Op Code to a control point
to perform some desired action. The control point operation ends
when the Object Server sends an indication to the Object Client
with the Op Code set to Response Code."
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
To make it easier to understand the code, the following was done:
- Use INITIATING/ADV for state names that are exclusive to central
or peripheral. Previously it was not necessarily clear that the state
BT_CONN_CONNECTING was for central only by just looking at where
it was used. The terms INITIATING/ADV were used in favor
of central and peripheral as these terms also work for SCO connection
establishment.
- BT_CONN_CONNECTING_SCAN -> BT_CONN_SCAN_BEFORE_INITIATING
to make it more clear that we are not scanning and connecting at
the same time. The new name should make it more clear why we are
scanning - only with the intention to start the initiator later.
- BT_CONN_CONNECTING_AUTO -> BT_CONN_INITIATING_FILTER_LIST.
This makes it clear that this state is something different than
BT_CONN_AUTO_CONNECT.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
When initially reading some of the host code it was unclear to me
why they were needed an how they are used.
By adding some documentation,
this can hopefully make it easier for others to understand these.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The following warning is issued by clang:
warning: field within 'struct gatt_chrc' is less aligned than 'union
gatt_chrc::(anonymous at subsys/bluetooth/host/gatt.c:1859:2)' and
is usually due to 'struct gatt_chrc' being packed, which can lead
to unaligned accesses [-Wunaligned-access]
This is due to the fact that the uint16_t uuid field requires 2-byte
alignment but it is not marked as packed. Since the enclosing struct is
indeed packed, the required alignment is not guaranteed and so clang
complains. Fix it by ensuring that the union is marked as packed too.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
The Mesh files `proxy_srv.c` and `pb_gatt_srv.c` were using
BT_LE_ADV_OPT_USE_NAME. Add the device name in the advertising data
directly.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the Bluetooth shell and its documentation to not use those
options anymore.
The option of the legacy advertiser run with `bt advertise` and the
behavior hasn't changed. The code has been updated to no longer use the
advertiser option but the original behavior has been reproduced.
The option of the extended advertiser have been updated to be more
explicit. The options `name` and `name-ad` have been removed from the
`bt adv-create` and `bt adv-param`. The option `name` and `dev-name`
have been added to the `bt adv-data` command.
- `name <str>` will advertise the given name.
- `dev-name` will advertise the device name.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Rework USBD shell to take speed arguments into account and revise
command help text. Rename some of the commands to better reflect what
they actually do.
Since most of the init code changes, rewrite the command to initialize
the default configuration in the shell to register all available
classes, but not to enable USB device support in a single command.
This will allow earlier notification in the future, if supported by the
controller, before the USB device controller is enabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
For the last dozen commits, the role of usbd_class_node has actually
been taken over by usbd_class_iter. After cleaning up and merging
usbd_class_node and usbd_class_data, we can rename usbd_class_iter to
usbd_class_node to better reflect its role.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since only usbd_class_node contains the class instance data, rename it
to usbd_class_data.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
With the latest change, there are two structures that actually contain
class instance related data. Merge them into usbd_class_dnode, because
there is already a handy macro that can be used in class instances.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Some places have been overlooked, finally get rid of it. Use helpers to
get instance priv and device context.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB High-Speed devices must be able to operate at both High-Speed and
Full-Speed. The USB specification allows the device to have different
configurations depending on connection speed. Modify the API to reflect
USB Specification requirements on what can (e.g. configurations) and
what cannot (e.g. VID, PID) be speed dependent.
While the class configurations for different speeds are completely
independent, the actual class instances are shared between operating
speeds (because only one speed can be active at a time). Classes are
free to provide different number of interfaces and/or endpoints for
different speeds. The endpoints are assigned for all operating speeds
during initialization.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Introduce usbd_class_iter for keeping endpoint assignment variables
and the single-linked list node. No functional changes right now, but
this paves the way for independent speed specific configurations.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When device is not configured, any class or endpoint request must result
in request error. Do not try to find transfer owner because there cannot
be one.
Make sure that the actual handling code path does not depend on the
configured log level because it is absolutely not desired for log level
to affect actual handling.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Do not require nil descriptor at the end of descriptor set because it
serves no other purpose than a sentinel. Just end processing on first
NULL pointer within descriptor set.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add necessary macros and convert UAC2 descriptor test from descriptor
blob to descriptor set. Currently there is only Full-Speed descriptor
set.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
For specification-compliant high-speed support, we need to support
device quilifiers and other-speed-configuration descriptor requests. We
also need to store different configurations of the class/function
descriptors, which typically only affect the endpoint descriptors. With
this change, the stack expects class/function descriptors to be passed
as an array of struct usb_desc_header pointers to e.g. interface,
interface-specific, and endpoint descriptors, with the last element of
the array pointing to a nil descriptor. And also passed for a specific
speed, for now we support full and high speed configurations.
During instantiation, the class/function implementation must choose the
correct configuration in the full-speed and high-speed descriptor sets
for values such as maximum packet size and bInterval values of interrupt
and isochronous endpoints.
During initialization, the stack reads the highest speed supported by
the controller and uses it to get the appropriate descriptors set
from the instance. If the controller supports only full speed, the stack
configures the class/function descriptor for full speed only, if the
controller supports high speed, the stack configures the descriptors for
high speed only, and a class/function must update the full speed
descriptor during the init callback processing.
During device operation, the class/function implementation must check
the actual speed of the device and use the correct configuration, such
as the endpoint address or maximum packet size.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Save actual device speed in the device context and add helpers to get
highest supported and actual speed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The class implementations should not access the members of the struct
usbd_class_node directly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This implementation is WIP and has mostly been used to test interface
and endpoint configuration by the stack. For future changes, make the
interfaces more compliant with the USB specification.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If compiling with optimizations (-O2/-Ofast) gcc emits a
maybe-uninitialized warning for `size`.
As far as I can tell, `size` will always be initialized in the cases
where it is used and only left uninitialized in error cases.
Reproduced on main with the multi_endpoint sample on
nrf5340dk/nrf5340/cpuapp.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
When initially reading some of the host code it was unclear
to me why they were needed an how they are used.
By adding some documentation, this can hopefully make it
easier for others to understand these.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Updates the linker script fragments under 'subsys' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The IPv6 address lifetime timers are kept in a slist, but
the code that adds the entry to the list does not check
whether the item is already in the list. This will cause
problems when trying to remove the address from the list.
Normally this is not causing issues, but if the function
net_if_ipv6_addr_update_lifetime() is called multiple times
before the address expires, then the item was added to the
slist multiple times.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Applications need to run a scan to identify the security
mode before attempting the connection which adds to the time
taken for connection to be established.
To avoid the initial scan, support auto security mode which will
enable STA to choose between WPA, WPA2 and WPA3, based on the
network configuration.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
In situations, where the address, the port and the auth token of the
hawkbit server are not known during build, it should be possible to set
it during runtime.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This commit fixes removing indirect blocks (marking them as 0)
in the inode structure. Previous version of the code was removing
the top-level blocks only when the first removed block was
one of the first 12 direct blocks. However, when the first removed
block is the first block in the referenced block list, its parent
(indirect block) should also be removed.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
Since `NONE` is a valid option for key management in `connect`
command, we should remove the part in help text which says:
"valid only for secure SSIDs".
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
UBSan was showing the following error:
```
runtime error: left shift of 137 by 24 places cannot be represented in
type 'int'
```
Cast the value to `uint32_t` to make UBSan happy.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The comment states the reason for this requirement is to detect
violations by a remote peer. The ATT version of this was removed in
ea04fd95f9. TLDR: It's neither possible
for, nor the job of the host to police the remote device.
We remove this requirement to be more flexible about the number of
priority levels in the system, and to avoid the temptation of using
priorities as a synchronization mechanism.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The remote domain may send unsolicited Z_LOG_MULTIDOMAIN_ID_DROPPED IPC
messages, which are not handled in log_multidomain_link_on_recv_cb().
With CONFIG_ASSERT=y, this will cause an assertion failure. With asserts
disabled, this message would be treated as a reply to any in progress
request and cause getter_msg_process() to return early. In turn, this
can cause various kinds of memory corruption when the real reply arrives
and the callback reads/writes stack variables that are no longer valid.
Fix this by explicitly ignoring Z_LOG_MULTIDOMAIN_ID_DROPPED, and also
don't treat unrecognized message types as replies.
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
This fixes warnings when building with icbmsg
backend for IPC service by defining
_POSIX_C_SOURCE 200809L in source file.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
In hawkbit there are currently a lot of values send to the server, that
are not required or even optional. This commit corrects that.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This commit change a method of printing multicast routes by showing
all interfaces per entry instead of aggregating them by interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
In order to save memory, a single multicast routing entry now
contains configurable number of network interfaces.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commit adds a check to determine if the packet wasn't already
forwarded to a given interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commmit changes the way of iterating over multicast routing
entries from explicit for-loop to ARRAY_FOR_EACH_PTR().
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The log message header "source" field for messages received from a
remote domain contains the source ID, rather than a pointer to the
source data (which would not be valid in the local domain).
msg_filter_check() did not handle this case and obtained a garbage source
ID for remote log messages. This caused an assertion failure in
filter_get().
Consistently handle this by adding a log_msg_get_source_id() function
that returns the source ID for both local and remote messages. This
function was implemented based on code factored out of
log_output_msg_process().
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Add support for decoding incoming LC3 data. At this point
we only instantiate a single LC3 decoder, so only one frequency
and duration is supported.
To accomodate for the increased RAM usage, the number of unicast
streams support have been decreased.
Further more, the LC3 handling in the shell has overall been
improved, also for encoding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Returned values are copies, so trying to "const" return values cannot
have any effect.
Fixes the following compiler warning:
```
llext.h:165: warning: type qualifiers ignored on function return type
```
Fixes commit 41e0a4a371 ("llext: Linkable loadable extensions")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
`ret` is the amount sent from the current buffer. `sent` contains the
total amount that was transferred in the while loop.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Modifies the audio configuration (ac) commands for CAP
and GMAP to use the default presets instead of supplying
the preset as arguments. This will allow the user to
use the `bap preset` command to configure everything in the
codec configuration before the AC commands are issued.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When creating a broadcast sink using the auto scan feature,
the call to bt_le_per_adv_sync_create would use a local
PA sync pointer, instead of one from the per_adv_syncs
array, making it impossible to stop the PA sync afterwards.
This commit modifed the auto_scan so that it properly uses
the per_adv_syncs array, while still assigning the PA sync
in the shell broadcast sink struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The print_codec_cfg_chan_allocation did not take the case where
chan_allocation == BT_AUDIO_LOCATION_MONO_AUDIO into account,
in which case it should print "Mono".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The commit 8256d02d3a introduced
getopt parsing for the wifi connect command
This needs to be updated for the wifi ap enable since ap
enable also uses the same parsing as connect.
The use of getopt removes the parameter ordering restrictions
Signed-off-by: Brad Kemp <brad@beechwoods.com>
In case FIN packet included data bytes, Zephyr would ignore the
data. It wasn't passed to the application, and it wasn't considered
when bumping the ACK counter. This ended out in connection timing out,
instead of being properly terminated.
Fix this, by refactoring FIN processing in TCP_ESTABLISHED state.
Instead of handling FIN/FIN,ACK/FIN,ACK,PSH cases separately, have a
common handler when FIN flag is present, and when ACK flag is present
along with FIN. When FIN is present, take any potentially incoming data
into account.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`bt_recv` is invoked from the BT long work queue, which is preemptible.
The host uses cooperative scheduling to ensure thread safety.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Allow changing the CoAP Block-wise transfers block-size
for subsequent GET requests.
It looks like Leshan switches block size back to its
configured value, if it is smaller.
So even when we send block N=0 with size of 512, Leshan
seem to handle that properly but still asks N=2 with
block size 256(if that is configured).
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement test version of the LE Create BIG command ll_big_test_create
(BT_HCI_OP_LE_CREATE_BIG_TEST) in the controller.
This enables use of CONFIG_BT_ISO_ADVANCED, which supports use of
the following BIG/QoS configuration parameters (otherwise derived):
- ISO_Interval
- NSE
- Max_PDU
- BN
- IRC
- PTO
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor improvements to usage of zperf_shell upload.
Added common defaults for the upload commands arguments.
Print defaults in cmd help.
Throw warning when user sets baud rate for TCP upload.
Signed-off-by: Adam Matus <adam.matus@nxp.com>
The network interface parameter for net_eth_get_vlan_tag() should
be the VLAN interface so use the search loop properly.
Earlier the main interface could be checked.
Add also test cases for this so that we can catch that the func
works properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add more error logs in case of (mostly) mbed TLS errors, so it's easier
to get an initial idea of what went wrong based on logs only. Getting
an information on an actual mbed TLS error code is quite helpful in such
cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Use CONFIG_BT_CTLR_CENTRAL_ISO instead of CONFIG_BT_CENTRAL in
declaring central CIS CREATE procedure context data. In some configs the
size of this data structure is bound by central CIS CREATE, so doing it
correctly will save memory in the procedure context allocation.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This commit adds support for building relocatable (partially linked)
ELF files as the binary object type for the llext subsystem.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add a new Kconfig option to select the binary object type for the llext
subsystem. This will allow to fully decouple the architecture type from
the kind of binary object that is expected by the loader.
The defaults have been chosen to match the current behavior of the ARM
and Xtensa architectures, but developers can now more easily experiment
with other object types.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
If central initiates incompatible procedure after having replied (with
_IND), peripheral fails to disconnect as spec'ed.
Fix by correctly setting the INCOMPAT flag to reserved on IND receipt to
enforce the disconnect.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Block size is a 3-bit value mapping values [0, 6] to powers of 2 in the
range [16, 1024]. Value 7 is invalid.
The previous formula was not working in case the client's preferred size
was 4 (or more) times bigger than the server's.
This commit takes into account also the case the client's preferred size
is smaller than the server's.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
It's needless complexity, and the terminology clashes with
Bluetooth (HCI frags).
It has one user, IPSP, that is going away soon.
Removing frag support will allow a future optimization, removing the
need for HCI and L2CAP fragment buffer pools, saving memory.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
By exposing the underlying iso channel, the application can retrieve
properties of the iso channel.
This can be useful in case the application wants to use the connection
handle for vendor specific HCI commands or to retrieve the particular
parameters used for the given channel.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
First sector starts at CONFIG_EXT2_DISK_STARTING_SECTOR.
This commit fixes calculating free space, based on that value.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
Adds support for all relocation type produced by GCC
on ARM platform using partial linking (-r flag) or
shared link (-fpic and -shared flag).
Signed-off-by: Cedric Lescop <cedric.lescop@se.com>
This extends the thread abort hook to support memory mapped
stack. The calculation to find out to which instance of thread
pools the outgoing thread belongs requires physical address.
So find the physical address via the memory mapped stack for
that.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The "struct sockaddr" should only be used in casts and never
as a standalone variable because it might not have enough
space allocated for all the protocol specific fields.
So refactor the port_in_use() function to reflect that.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
errno values are positive, therefore they should be negated when
assigned as return values for net_dhcpv4_server_start().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
`setsockopt` is enabled by `CONFIG_POSIX_API`, use
`zsock_setsockopt` instead, otherwise there will be a
compilation error if `CONFIG_NET_SOCKETS_SOCKOPT_TLS` is
enabled.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Check if the interface is down before joining IPv4 mDNS multicast
group. This avoids warning later when the network packet cannot be sent.
Fixes#71121
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This API is not widely used and it is actually broken since device
runtime power management is not checking it when suspending and
resuming.
On top of that, this API is very close to pm_device_busy* API,
close enough to consolidate in only one API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Commit e99b5228a1 changed the default
networking behavior on qemu platforms, as the SLIP_TAP driver no longer
selected Ethernet L2. In results, qemu platforms in default
configuration had no network interface to work with.
Fix this, by restoring select for NET_L2_ETHERNET, but this time in
NET_SLIP_TAP. The difference is that SLIP_TAP is a generic driver
config, which could be enabled on any platform, so not changing the
behavior here, while NET_SLIP_TAP is a config dedicated for qemu only,
so it's reasonable to enable all that's needed to get SLIP to work with
qemu by default.
As there were circular Kconfig dependencies, move the respective qemu
configs outside of NET_RAW_MODE if block (as this caused the circular
dependency with ETH_DRIVER_RAW_MODE). Also, remove dependency to
NET_L2_BT, as it made little sense there, and also caused dependency
problems.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is no limitations for dwell time. Just add
valid condition for positive value. So , it's better
to remove those constraints.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
The bt_debug_dump_recv_state did not care if the receive
state being dumped to log was active or not, and if it was
not actice, then it may just contain random data.
Added a check to see if it was active.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Running out of connection contexts is most likely due to app
misconfiguration, therefore it's useful to get an explicit information
that context allocation failed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The cap_initiator unicast_stop command will now stop
all streams by default, without supplying the "all" argument.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some part of the descriptions were wrong. Also, the description of
`BT_BUF_ACL_RX_SIZE` was too verbose and no longer needed with the
updated L2CAP documentation.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The buffers for the PBP advertising data as well as the
buffers for the BASE periodic advertising data were
not cleared, so calling the functions multiple times
would simply append the data rather than just setting
the new data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There are devices that will send empty SDUs instead of
empty PDUs, and while that should be harmless, it is nice
to know what is going on, and we may want to deal with
empty SDUs and empty PDUs differently.
This also modifies the state for TS and PSN to only be
applied for valid ISO packets.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It is a common occurance that a specific type is not
found in the codec configuration, and the main way of
knowing that is by calling the function.
The debug log does not help debug anything (as it does also
return a specific error code), but rather just clutters up
the log if enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When returning an error code directly to an application
in the API, it should not log as a warning or error.
The lack of PAC records is also reported directly to the
application, and is not an error (in fact it is valid not to have
e.g. sink or source pacs).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add printing of the broadcast ID and whether an existing PA
sync was found in the bap_broadcast_assistant_recv_state_cb
function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bap_broadcast_assistant mod_src command can now take "unknown"
as a value to supply BT_BAP_PA_INTERVAL_UNKNOWN to the scan
delegator.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The documentation for the command
bap_broadcast_assistant broadcast_code
was incorrect and has been fixed.
Additionally, and example of the command has been added
in the shell documentation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When a PA is synced via PAST, the receive state does not
have a PA sync object, and the address and SID must be
used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The audio configuration 5 is defined to have 2 sink channels
per stream and 1 source channel per stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If pa_sync_past returns 0 then that means we are ready to
sync to past, and the BT_BAP_PA_STATE_INFO_REQ state should be set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some toolchains cannot create shared objects for Xtensa, with them we
have to use relocatable objects. Add support for them to llext.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Correct various small edge-case behaviors that have been accidentally
introduced in the http_client.
- http_client_req no longer incorrectly returns -ETIMEDOUT on NULL HTTP
resonse. -ETIMEDOUT is now only returned when the underlying TLS
socket times out.
- http_client_req now returns -ECONRESET upon incomplete (but non-NULL)
HTTP response. The request callback is no longer called in this case
(as with any other error state).
- http_wait_data has been refactored slightly to increase clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
If the packet cloning fails (can easily happen when working with
loopback interface and when having low net_buf count), then
print a warning to the user. Error could also be possible but
as the situation might correct itself in this case, the warning
should be enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adds the CAP Commander Change Microphone Mute procedure.
This procedure changes the microphone mute state on one or more
CAP Acceptors.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If we fail to join all nodes or solicit node multicast groups
when the interface is down, then there is no need to print an
error message. The groups are automatically re-joined when the
interface comes up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
remove unnecessary condition for CONFIG_HAWKBIT_POLL_INTERVAL,
changes poll_sleep to be in seconds,
change type of sleep_time in hawkbit_update_sleep(), so the return
value of hawkbit_time2sec() is interpreted correctly.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
In addition to flushing the dcache, to ensure that the new code is
actually read by the CPU when loading an extension, the icache must
be invalidated as well.
Without this, some tests are failing in hardware because the CPU is
executing stale code from its instruction cache.
Fixes#70906 on arduino_giga_r1/stm32h747xx/m7.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Resolved a data race in shell.c by copying the user-provided
prompt-string into a private buffer within the shell, ensuring
proper synchronization with the shell-thread.
Fixes: #64972
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
If user created the capture device using the API and not via
the shell, then the device name was not set. Use the default
capture device in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The event NET_EVENT_CAPTURE_STARTED is generated when the
capture is enabled, and NET_EVENT_CAPTURE_STOPPED when capture
is disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_capture_pkt() does not return information what happened
to the net_pkt because the packet was always cloned. With cooked
capture we can avoid the cloning in which case we need to know
the capture status in order to unref the packet if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for capturing arbitrary data via the cooked mode (sll)
capture API. The actual packet capture is done using net_capture_data()
function, the packet capture infrastructure does not need any changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to create a kitchen sink pseudo a.k.a any network
interface that one is only able to write to. This might seem
unnecessary, but it is possible to attach virtual network
interfaces on top of this pseudo interface. These virtual
interfaces could then process the data for example for
packet capture purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For debugging purposes it would be nice to see the verdict
printed as a string instead of number.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a recv callback to dummy API. After this it is possible to
receive data by a dummy network interface. This is only useful
if one attaches a virtual interface on top of the dummy one.
One such example is the cooked mode capture interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Change 'Hawkbit' and 'hawkbit' to 'hawkBit' wherever
makes sense, and a bit of touch ups here and there.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This commit fixes an issue where due to inverted logic (static function
returned 0 on success but the caller expected true/false) the MLDv2
reports were silently dropped.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Added a check for checking duplication when adding a source in the
broadcast assistant, as per requirement in BAP 6.5.4. It is not
permitted to add a source such that a combination of broadcast_id,
adv_sid and address type would result in same triple of values.
Added a recv_state struct to cache these values when read, and moved
past_avail and srd_ids into this as well.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add hostname changed printout to event monitor. As the name
says, it is generated when the hostname of the device changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Starting with b1d24e425c (net: lwm2m:
device object: optionally store error list in settings), it was no
longer possible to build the code with coverage enabled when the
settings subsystem was disabled.
The build would fail with an error like this:
> subsys/net/lib/lwm2m/lwm2m_obj_device.c:262: undefined reference to
> `settings_name_steq'
This fixes#70923.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add `gdb_q_packet` function to handle proccessing of query packets. Also
add `gdb_qsupported` function to serve as a single place to process and
respond to `qSupported` packets.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Make the current gdb loop enum public under the name `gdb_loop_state`.
This will allow for extending the current stub with further
functionality in the future as new features will require control over
the loop state.
Signed-off-by: Robert Zieba <robertzieba@google.com>
According to the `RFC8415` the length of the DUID is at least 1 octet
up to 128 octets. Now a user can choose buffer length without the need
for source code modification.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
For BR/EDR L2CAP, if the function bt_l2cap_br_chan_send_cb
instead of bt_l2cap_chan_send is called, the ACL conn and
L2CAP chennel status will not be checked.
Check conn/channel status before sending data in
function bt_l2cap_br_chan_send_cb.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
eth_stats.h is using ethernet api but not including the header,
it must be working by luck in files that include it after
something else that includes ethernet.h, fix by just including it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Change the receive workque name to "BT RX WQ" to distinguish it from the
receive thread, and the long workque one to "BT LW WQ" to make the
format consistent with the other Bluetooth threads.
On an nRF52 now "kernel stacks" looks like:
0x200016c8 BT RX (real size 448): unused 280 )
0x20001780 BT RX pri (real size 448): unused 224 )
0x200012c0 BT RX WQ (real size 2240): unused 1360 )
0x20001208 BT TX (real size 768): unused 408 )
0x20001130 BT LW WQ (real size 1344): unused 408 )
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Change the input callback function name to make it easier to identify
what it belongs to. This clears some ambiguity when observing the symbol
names corresponding to the function pointers in the callback section.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Users should be able to call fs_mkfs() manually even if FS_FATFS_MOUNT_MKFS
is disabled.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
To wait for the asynchronous suspending work item to complete, a
combination of semaphores and events is used. First, the semaphore is
released, then the events are cleared (through the boolean argument to
k_event_wait), then events are awaited.
However, if the event flag happens to be set by the work handler in the
short time between k_sem_give and k_event_wait, it is then cleared by
k_event_wait and k_event_wait blocks forever waiting for the event.
Make sure that we clear the event flag before releasing the semaphore.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
With CONFIG_BINDESC_BUILD_TIME_ALWAYS_REBUILD a re-run was called for
the entire project.
This can result in issues with the zephyr linker mechanism.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
There should be a particular defines which clarify the
use of that number. So, replacing numbers with defines
in wifi shell.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Outgoing block-transfers now set the socket hint
to ONGOING as long as the BLOCK1/BLOCK2 header has
MORE flag set to true.
This means as only the last packet in the block-transfer
set the socket hint to LAST or ONE_RESPONSE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Once Wi-Fi is associated few parameters like listen interval and
power-save mode cannot be changed. The state for association is
"ASSOCIATED" and not completed. Even after state transitions to
COMPLETE, it can still go back to other states, e.g., PTK/GTK renewal.
Fix the state check.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If host is not reading RTT data (because there is no PC connection
or RTT reading application is not running on the host), thread will
stuck continuously trying to write to RTT. All threads with equal or
lower priority are blocked then. Adding detection of that case and
if host is not reading data for configurable period then data is
dropped until host accepts new data.
Similar solution is using in RTT logging backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
All implementations of random number generator where duplicating logic
for sys_rand32_get. Since this subsystem already has a logic to
generate random values of arbitrary size, we can generically implement
sys_rand32_get on top of that.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print also network interface index together with the pointer value
in order to get more useful information what is going on in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print information whether a multicast address is properly
joined to a multicast group when print addresses using
"net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As the interface type is always Virtual, no need to print it.
Print instead the name of the network interface as it is more
useful to the user.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If an IPv6 address was added to the interface while the
interface was down, its solicited node multicast address
is not joined properly and IPv6 communication will to
other hosts will fail. So make sure to rejoin all the
solicited node multicast groups that were joined already
when the network inteface is going up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add debug information to print when the network L2 enable
callback is called and fails. Useful to see this information
as at that point the interface goes down.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Start any pending IPv6 DAD timers when interface comes up.
If IPv6 addresses have been added to the network interface when
it was down, the addresses would never work properly if the DAD
is not done.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of printing just a network interface pointer, print
also the interface index so debugging is a bit faster as no
lookup from interface listing is needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
No need to do the checks any more because user has specified
the VLAN count and so many VLAN virtual interface are already
created.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Re-implement the VLAN support inside the network stack.
All the user facing APIs stay as is but internally the VLANs
are implemented using the L2 virtual interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some compilers have trouble parsing variables directly after a case
statement.
Fixes: #70792
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Changing remaining users of fcntl.h to use the include from our own
POSIX file so that the values in there are consistent in all parts
of the sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use only Zephyr specific POSIX header files so that the whole
system is getting values from the same files. There was an issue with
native_sim run of tests/net/socket/af_packet which had O_BLOCKING set
to 0x4000 from include/zephyr/posix/fcntl.h, but then the file
subsys/net/lib/socket/sockets.c was having O_BLOCKING set to 0x0800
because different header files were used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit fixes this error seen in CI so that things
work even if CONFIG_POSIX_API is enabled.
subsys/shell/backends/shell_mqtt.c:727:12: error:
conflicting types for 'write'; have
'int(const struct shell_transport *, const void *, size_t, size_t *)'
727 | static int write(const struct shell_transport *transport,
const void *data, size_t length)
include/zephyr/posix/unistd.h:230:9: note: previous declaration
of 'write' with type
'ssize_t(int, const void *, size_t)'
230 | ssize_t write(int file, const void *buffer, size_t count);
subsys/shell/backends/shell_mqtt.c:787:12: error:
conflicting types for 'read'; have
'int(const struct shell_transport *, void *, size_t, size_t *)'
787 | static int read(const struct shell_transport *transport,
void *data, size_t length, size_t *cnt)
include/zephyr/posix/unistd.h:231:9: note: previous declaration
of 'read' with type
'ssize_t(int, void *, size_t)'
231 | ssize_t read(int file, void *buffer, size_t count);
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The library should be using internal socket API functions
so that we do not need to depend on POSIX_API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently the socks library does not use sockets so there
is no need to select socket symbols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The library should be using internal socket API functions
so that we do not need to depend on POSIX_API inside the
network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Have special wrappers for zsock_fcntl and zsock_ioctl functions
so that gcc warning can be avoided.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The CONFIG_NET_SOCKETS_POSIX_NAMES option is marked as deprecated in
favor of using normal POSIX socket API includes found under the
include/zephyr/posix directory. If you want to use BSD socket API calls,
you need to select POSIX_API and use the socket headers found in the
POSIX subsystem. If you do not want to or cannot enable POSIX_API,
then you must use zsock_ prefix when working with BSD socket calls.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>