If user has not supplied address pointer when calling accept(),
then we would not be able to figure out the used socket domain
properly. But as there is now SO_DOMAIN option supported, use
that to get the correct socket domain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The getsockopt() will return the address domain of the given
socket like AF_INET or AF_INET6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Made the definition of in_addr all_routers conditional to remove
compiler warning:
warning: 'all_routers' defined but not used [-Wunused-const-variable=]
The warning occurs when igmpv3 is enabled.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
If there's not enough networking buffers at certain moment,
they might become available later. So instead of closing connection
(and failing assertation) sleep and retry. This avoid the following
assertion failure when there's much of data to send:
net_pkt: Data buffer (1500) allocation failed.
net_tcp: conn: 0x20076024 packet allocation failed, len=1460
shell_telnet: Failed to send -105, shutting down
ASSERTION FAIL [err == 0] @ .../subsys/shell/shell_ops.c:416
os: r0/a1: 0x00000004 r1/a2: 0x000001a0 r2/a3: 0x00000004
os: r3/a4: 0x20044380 r12/ip: 0x00001958 r14/lr: 0x080c9027
os: xpsr: 0x41000000
os: Faulting instruction address (r15/pc): 0x0811ed26
os: >>> ZEPHYR FATAL ERROR 4: Kernel panic on CPU 0
os: Current thread: 0x20045100 (shell_telnet)
os: Halting system
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
The HDA log backend has been buggy for some time, and the fixes are well
understood. The issue with HDA log as it is implemented today means
there are concurrency and ISR issues where it can deadlock.
The fixes are effectively dropping the usage of ipc to communicate
status, using polling on the hda stream, and having a formatter per call
context (cores + isr) when log mode immediate is enabled to fix log
mangling. However it was found this had a lot of unintentional side
effects that made it difficult to make progress on when it came to
changes of the host side python tooling.
Meanwhile the feature has sat unused for nearly a year. Remove it, and
it can always be revisited in the future if something like it happens to
be needed.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The meaning of bit0 in the audio location bitmap will change to
mono audio, so we update the audio location macro and releated
test cases.
Refer to BT SIG ES-22266.
Signed-off-by: Bi Jian <bi_jian@qq.com>
This commit adds a new function the net_buf's API that allow an user
to match the net_buf's content with a data without copying it to a
temporary buffer.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The stream_in_subgroup variable in bt_bap_broadcast_source_reconfig
may have been uninitialized.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In pac_notify and pac_notify_loc coverity found logical dead
paths since if both sink and source notify was disabled,
the functions would still be compiled, but would
never get past the default case.
This is not a real issue as the functions were never called
in that case, but to make coverity happy, and to prevent
any future issues where the functions may be called
incorrectly, the static functions are now fully guarded.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of reimplementing the aes_cmac function, CSIP
will now use the bt_crypto_aes_cmac function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The channel allocation was incorrect when setting up multiple
streams to a single device, in which case we should apply
individual bits to each stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Previously it was not always possible to prepend the header.
It was not possible if the application neglected to reserve the space
for headers. This is bad because it forces a buffer segment allocation
even if the buffer had enough room for the headers. E.g. a payload of 10
bytes in a netbuf of 30 bytes would have been segmented.
We now explicitly reject the buffer if it does not have the headroom.
This allows us to do a nice thing; simplify L2CAP segmentation.
We convert the SDU from the application into a PDU payload, by
prepending the SDU header, i.e. the SDU length in the original buffer.
This PDU payload is ready to be chunked into PDUs without having to keep
track of where in the SDU we are. This has the effect of removing a
bunch of logic in the segmentation machine.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Enable by default the access layer responses random delays.
Commit also adapts all mesh models, samples and
babblesim tests to use random delay functionality correctly.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The asynchronous put is not checking if the device was successfully
suspended before suspending its domain and it is not checking if the
domain was claimed. This patch adds these two checks.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
gcc prints this warning message
'strncat' specified bound 1 equals source length [-Wstringop-overflow=]
58 | strncat(fd, "C", 1);
There was no error in the code but avoid the warning by not using
strncat().
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The socket service provides a similar functionality as what
initd provides in Linux. It listens user registered sockets
for any activity and then launches a k_work for it. This way
each application does not need to create a thread to listen
a blocking socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The function did not move data correctly when increasing
or decreasing the size of a value that was not the last value
in the LTV array.
Added a few tests to verify the fix, using the CCID list as the
main way of verifying it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There was a few places where the scan delegator returned an
errno value instead of a valid GATT error codes when rejecting
write request. These have been modified to send
BT_ATT_ERR_WRITE_REQ_REJECTED to the client instead.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add additional debug information in some ASCS debug statements,
so it is easier to follow the state when there is a potentional
state change.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds notifications to do_first_track only when changing group.
Before the change was made, client was never notified about
track change when changing group in Media Player.
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Some of the ASCS response codes should not be used by the
unicast server, as those will be checked and validated by the
stack.
They are kept in the enum, as the enum is also used by the
unicast client.
Besides updating the documentation, this commit also adds
a function to validate the response codes as well as the
combination of response codes and reason/metadata values,
and log a warning if the application does not adhere to the
documented behavior.
A warning is used instead of an error/assert/modification
of the response codes, as there may be unforseen reasons
why an application provide a non-approved response code,
and since it may be spec-valid, we should not fully
prevent it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
According to the POSIX specification, null pointer
is a valid value for the `address` argument
of the `accept` function.
This commit adds a check to prevent a null pointer
dereference inside `z_impl_zsock_accept`.
Signed-off-by: Mirko Covizzi <mirko.covizzi@nordicsemi.no>
This PR makes the modem_chat wait until a chat script chat
request has been sent before accepting responses to said
request.
This helps ensure that an unsolicitet response is not mistaken
for a response to a request, which is especially problematic
if the chat script chat is using an any match.
For example, start chat script sending AT+CGMI, expecting the
modem name as a response followed by OK
> start script, waiting for response immediately
> start sending "AT+CGMI"
> receive "+CEREG 1,0" while sending
> script accepts "+CEREG 1,0" as the response to "AT+CGMI"
> "AT+CGMI" sent
> receive "QUECTEL BG95"
> receive "OK"
script handler got "+CEREG 1,0" instead of "QUECTEL BG95"
After this PR:
> start script
> start sending AT+CGMI
> receive "+CEREG 1,0" while sending
> "AT+CGMI" sent
> start waiting for response
> receive "QUECTEL BG95"
> script accepts "QUECTEL BG95" as response to "AT+CGMI"
> receive "OK"
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
It seems like a nice idea at first, but leads to hard-to-debug
situations for the application.
The previous behavior can be implemented by the app by defining
`alloc_seg` and allocating from the same pool as `buf`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Strings stripping was disallowed when LOG_OUTPUT was used. However,
there is a dictionary log_output module which could work with stripped
strings. Dependency is changed to LOG_DICTIONARY_SUPPORT.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
So far frontend supported only compile time filtering. Adding
support for runtime filtering. From runtime filtering perspective
frontend is treated similar to any other backend but since
it is a singleton it has fixed ID.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
A problem occurred while running PTP on a multi-port target
(RENESAS RZT2M) with two ports enabled. Announce messages on the
switched devices master port always contained local clock information
instead information from received on the slave port from the better
GM clock. Depending on the BMCA config this turned into having more
than one GM in the system.
Sending always the locally stored GM information helped to overcome
this issue.
Signed-off-by: Manuel Schappacher <manuel.schappacher@hs-offenburg.de>
Provision of configurable parameter for generating unblock event
ahead of TWT slot. Host application depending upon latencies can
configure this to wakeup rpu ahead of the TWT slot.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
ARM GCC version 12.2.0 (Zephyr SDK 0.16.4) generates the following build
warning from the strncpy call in "wifi_utils_parse_scan_bands":
warning: '__builtin_strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
To resolve this warning, pass the maximum length of the temporary
parse_str buffer to strncpy. This also has the benefit of correctly null
terminating parse_str, since we already verify the
scan_bands_str is properly null terminated with the strlen() check in
this function. We can therefore remove the line adding a null terminator
to parse_str as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for DYNAMIC_INTERRUPTS and ARM specific
DYNAMIC_DIRECT_INTERRUPTS.
Co-authored-by: Radosław Koppel <radoslaw.koppel@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ull_prepare_dequeue to not skip events when preempt
does not match the event in the head of the prepare queue.
The head of the prepare queue does not match when
ull_prepare_dequeue has put the head of the queue to the
last of the queue when it is calling lll_resume interface.
This happens when there is already an active event which
needs a preempt timeout to be setup and there is another
non-resume event in the pipeline which now becomes the
head. The fix ensure to restore the order of the events
if a preempt timeout was to be setup.
Currently ull_prepare_dequeue loops through all events
before stopping at the original way the queue was. This is
not efficient and is a scope for improvement in future.
This reverts commit 91781306e9 ("Revert "Bluetooth:
Controller: Fix ull_prepare_dequeue for skipped events"").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a stub API for a non bus emulators. The stub is used to keep the
rest of the emulation consistent.
Signed-off-by: Yuval Peress <peress@google.com>
This was missed in earlier that tried to fix all string comparisons to
use case insensitive comparison.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This optimization aggregates frame headers before adding to the ring buffer
and computes the FCS of the frame header in one operation.
This approach improves execution efficiency and reduces memory footprint.
This code adjustment aligns with the changes proposed in https://github.com/zephyrproject-rtos/zephyr/pull/67062.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Implement transmit idle notification for TTY backend. Since TTY
has an "infinite" transmit buffer, we invoke transmit idle
immediately after writing the data to the TTY file.
The test suite for the TTY backend has been updated to match the
new behavior.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Make async and interrupt driven UART backends notify transmit
idle when transmit is idle.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add transmit idle event to modem_pipe_event enum. This will
allow modules to await transmit idle before trying to transmit
more data, instead of blindly calling modem_pipe_transmit in
a loop until all data has been accepted.
This will reduce the time spent trying to transmit data while
the backend is blocked.
Similarly to the RECEIVE_READY event, backends will call
modem_pipe_notify_transmit_idle() to indicate that transmit
is idle, and the TRANSMIT_IDLE event will be reinvoked when
the modem pipe is attached to synchronize the state of the
pipe with the user of it.
Additionally, the TRANSMIT_IDLE event is also invoked when the
modem is opened to further help synchronization with the user
of the pipe.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The help text was incorrect, we return -ETIMEDOUT instead
of -ECONNRESET when retransmission timeout occurs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
kconfiglib.py has a hard dependency on CONFIG_MODULES to support 'm'
values for tristate Kconfig options. It's a logical companion for
but can also be used with other configurations.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Some modems don't start sending resync flags as described in
3G TS 27.010 V2.0.0 5.2.5, which results in the CMUX being
stuck in resync mode for said modems.
This patch simplifies the resync mechanism to simply drop
invalid frames, and wait for atleast two consequtive frame
flags (stop+start).
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Extract BR/EDR definitions from `l2cap_internal.c` into its own headers:
one for the interface with l2cap.c and one for the rest of the BR/EDR
stack.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Isolates BR/EDR's l2cap use from LE (most of l2cap.c).
Why? Because I'm refactoring l2cap.c and don't want to accidentally
break BR/EDR support, as there are very few tests in CI.
This way, once `bt_l2cap_chan_send` hands control to l2cap_br.c, it will
not call back into l2cap.c, it will instead be a parallel layer going
directly to conn.c.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
In AP mode maintain the database of connected stations based on the
Wi-Fi management events and dump the list.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These are helpful to track clients being added and deleted.
Applications can actions based on these events.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These events communicate the status of AP mode operations (enable or
disable) with few pre-defined enumerations.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Update the example of scan -c argument.
Default value for max channels is set to 3,
So, update the example according to that.
Add closing bracket in -s.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Adding a callback for handling lwm2m messages with prefixed paths defined
by the gateway object. If CONFIG_LWM2M_GATEWAY_OBJ_SUPPORT is set,
each path is checked for the prefix stored in the object instances of the
gateway object 25. If prefixes match the msg is passed to the gw_msg_cb.
Signed-off-by: Simon Walz <simon.walz@autosen.com>
__bswap_ in zephyr/sys/byteorder.h conflicts with __bswap_ in host's
byteswap.h. byteswap.h from host compiler used in posix_native_64 boards
causes a compilation issue.
This commit renames __bswap_ to BSWAP_ to prevent collision.
Before this commit a compilation error can be created by adding #include
<byteswap.h> to samples/net/sockets/echo/src/socket_echo.c
This does not change external API to byteorder.h, but does change
internal implementation which some other source files depend on.
Replaced manual byteswap operations in devmem_service.c with APIs from
byteorder.h which automatically converts to CPU endianess when necessary.
Fixes#44324
Signed-off-by: Jonathan Hamberg <jonathanhamberg@gmail.com>
audio_receive_cb is only used by headphones and headset, it is unused in
microphone-only configurations. Gate compilation based on the device
tree.
Signed-off-by: James Zipperer <jzipperer@fb.com>
Change function parameter name in function usbd_device_set_code_triple
from `class` to `base_class` as `class` is a keyword in C++.
Signed-off-by: Shane Snover <ssnover95@gmail.com>
Let's always enable the native_posix backend even
if the serial is used.
Both can be used at the same time, and:
a) users expect the logger output in the invoking shell even if they
enable the UART
b) Since printk is routed to the logger twister actually needs it
for tests to pass as for native platforms it looks into the stdout
of the process.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Previously, if an SD I/O operation was attempted while another thread
held the mutex for the SD card, the I/O operation would simply fail. Add
a timeout to k_mutex_lock calls within the SD subsystem, so that
multithreaded access to the SD card instead blocks until the SD card is
available for I/O
Fixes#66211
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add a function callback that is called when the TCP connection
is closed. This is only available if doing network tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The FIN timer was not set when we entered the FIN_WAIT_1 state.
This could cause issues if we did not receive proper packets
from peer. With this fix, the connection is always terminated
even if peer does not respond.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we are in a passive close state, then it is possible that
the ack we are waiting is lost or we do not accept the one peer
sent to us because of some earlier out of memory issue.
So install a timer (using by default the FIN timer value) to
close the connection if the last ack is not received on time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
PBP API allows sources to create a Public Broadcast Announcement.
PBP API to parse a Public Broadcast Announcement.
public_broadcast_source application starts extended advertising and
includes a Public Broadcast Announcement. The advertised broadcast
audio stream quality will cycle between high and standard quality.
public_broadcast_sink application scans for broadcast sources and
synchronizes to the first found source which defines a Public Broadcast
Announcement including a High Quality Public Broadcast Audio Stream
configuration.
Add bsim tests for Public Broadcast Profile APIs.
Add shell implementation for Public Broadcast Profile APIs.
Signed-off-by: Daniela Andreea Dumitrache <danielaandreea.dumitrache@nxp.com>
- Support for listing both testcases and testsuites
- Support for running single suites or single test cases
- Support shuffling tests and repeating execution based on command line
arguments.
For example, build with
west build -p -b qemu_cortex_m3 tests/kernel/sleep -t run -- \
-DCONFIG_ZTEST_SHUFFLE=y -DCONFIG_ZTEST_SHELL=y
Following commands are available:
uart:~$ ztest
ztest - Ztest commands
Subcommands:
run-all :Run all tests
shuffle :Shuffle tests
list-testsuites :List all test suites
list-testcases :List all test cases
run-testsuite :Run test suite
run-testcase :Run testcase
shuffle accepts two arguments --suite_iter and --case_iter which allows
repeated exercution of testcases or suites.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disables pb gatt- and gatt proxy advs when suspending Mesh, and
enables them again when resuming Mesh.
Adds `bt_mesh_adv_gatt_send` to `bt_mesh_resume` to make sure that
GATT advs start after resumption.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Previously, `bt_mesh_proxy_gatt_enable` returned the return value from
`k_work_schedule`, which could be a positive (non-error) message.
Now, it only returns negative error codes (else 0).
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
It is useful for an application to be informed when there is
a subscriber waiting for HRS service notification.
Extend HRS service API and add required code to service implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The help text uses the capital case as its an acronym, but passing
capital case fails. Also extend that to others as well.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For better readability, below rules will help:
* Each command should be separated by a newline
* Each command should end with a full stop (intermediate statements
shouldn't have full stops)
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
We are using standard notation to differentiate optional and mandatory,
so, no need for a heading.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
DLCI receive buffer may overrun if data is not processed fast
enough. This error was not reported before this patch, resulting
in unexplained missing bytes.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Makes it clearer what that bit means:
If set, the channel has capacity to send at least one PDU.
If unset, the channel ran out of credits and won't be able to send
anything until the peer sends credits back.
Also add debug logs.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Prevents confusion, as the similarly-named `l2cap_send()` also unrefs the
buffer if it fails to send.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This adds user configurable CONFIG_LOG_MIPI_SYST_DISABLE_TIMESTAMP
Kconfig option to use it for macro MIPI_SYST_PCFG_ENABLE_TIMESTAMP.
Moving macro definition of MIPI_SYST_PCFG_ENABLE_TIMESTAMP from
mipi-sys-t library to platform.h which defaulted to undef.
CONFIG_LOG_MIPI_SYST_DISABLE_TIMESTAMP gives flexibility to users
when needn't use mipi-sys-t protocol timestamp.
Signed-off-by: Fang Huang <fang.huang@intel.com>
Add functions to do XOR on arrays of memory, with one that
takes arbitrary sizes and one for 32 bits and 128 bits as
those are common sizes for this functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
lwm2m_engine_pause() caused deadlock if it was called within
engine thread.
Remove while loop from lwm2m_engine_resume().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add short delay before triggering registration update. This allows
postponing the update from application side if needed.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
If an instant based remote procedure 'overtakes' a local ditto
the local procedure will be 'completed' by remote rejection
but collision flag would not get set ensuring that a new local
conflicting procedure cannot be started before the remote is completed.
This can thus lead to invalid local initiation.
Added unittest to cover case
Fix by ensuring collision flag is set also in the above mentioned
scenario.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Replace mutexes with semaphores to protect the channels in conjunction with
a priority boost algorithm based on the observers' priority.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
DTLS socket is not really connection-less as UDP, as it required the
DTLS handshake to take place before the socket is usable. Therefore,
align the DTLS connect() behavior with regular TLS.
The change is backward compatible. connect() call is still optional for
DTLS socket (the handshake can still take place from send()/recv()) and
a socket option was provided to disable DTLS handshake on connect().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When using DTLS socket, the application may choose to monitor socket
with poll() before handshake has been complete. This could lead to
potential crash (as the TLS context may have been left uninitialized)
and unexpected POLLIN reports (while handshake was still not complete).
This commit fixes the above - POLLIN will only be reported once
handshake is complete and data is available
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a socket error was caused by TLS layer, it was not reported with
POLLERR. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case TLS session is closed at the TLS level (and thus recv() reports
0 to the application) a certain race occurs between consecutive recv()
call, and TCP session teardown. As mbedtls_ssl_read() only reports
session close upon receiving CLOSE alert, consecutive non-blocking
recv() calls would report EAGAIN instead of connection closed, if called
before underlying TCP connection was closed.
Fix this, by storing the information that TLS session has ended at TLS
socket level. The new flag will be checked before attempting further
mbed TLS actions, so that connection status is reported correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CMUX resync mechanism can get stuck between states
MODEM_CMUX_RECEIVE_STATE_RESYNC_0 and
MODEM_CMUX_RECEIVE_STATE_RESYNC_1 if the resync flags, which are
sent only once in state MODEM_CMUX_RECEIVE_STATE_SOF, are not
responded to, or the response is lost.
This patch ensures resync flags are sent from states
MODEM_CMUX_RECEIVE_STATE_SOF, MODEM_CMUX_RECEIVE_STATE_RESYNC_1
and MODEM_CMUX_RECEIVE_STATE_RESYNC_2 if its determined that the
resync flags are not being responded to.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The chat module contains an array of three lists of matches,
one of which are static, two of which are contained within the
currently running script. The current match, which is an
object stored in one of the three lists, is stored in its own
pointer in the chat module context.
A memory error occurs when the script is stopped, while the
chat module is using one of the matches stored withing the
script. This commit clears the match pointer when the script
is stopped if the match is stored within the script.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
If we receive a IPv4 packet to v4 mapped address, the relevant
net_context is bound to IPv6. This causes issues if we try
to get the family from the context struct in sendto.
Fix this by checking if the destination address is IPv4 but
the socket is bound to IPv6 and v4 mapping is enabled.
If all these criterias are set, then set the family of the
packet separately and do not get it from net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure iovec is initialized to a value so that there
is no possibility that it is accessed uninitialized.
Fixes: #66838
Coverity-CID: 334911
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The original idea was to check that we have enough network
interfaces in the system. The check needs to verify max IPv4
and IPv6 supported interfaces instead of always checking
IPv6 one.
Fixes: #66843
Coverity-CID: 334899
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In cases where the data is bigger than 127 bytes,
the first bit of the second byte of the data length field
used to always be set.
This is wrong as according to the 3GPP 27.010 spec
only the first bit of the first byte is the EA bit;
all the others denote the data length.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
When these fails the compiler just prints "Option must be enabled" with
no reference to what option, so one has to look at the code to find out.
Mention the actual option in the error to make these unambiguous.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This moves bt_has_client instance structure to has_internal.h header
file to be able to access to the instance members in tests.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The dictionary logging passed the full log_output structure
to the backend instead of the user context void pointer.
Signed-off-by: Kai Meinhard <meinhard@gessler.de>
Without this, the hardware watchdog would expire if no task watchdogs were
registered within one hardware watchdog period after init. Start the
background channel immediately after init to avoid this.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Refactored the socket state indication into its own function
that checks the state of TX queues as well as number of
pending CoAP responses.
Check the state after receiving a packet, as it might
have been a last Ack packet we have been waiting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The SPI STM32 Host Command backend doesn't use general SPI driver, so it
has to implement Power Management on its own.
The suspend procedure includes: setting pins to the sleep state,
disabling device clock and disabling CS pin interrupt.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add function to get a MICP microphone controller
instance from a connection pointer. This is effectively
the reverse of bt_micp_mic_ctlr_conn_get, and works similar to
bt_vcp_vol_ctlr_get_by_conn.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This removes duplicated code by adding helper functions to allocate
and free bt_tbs_call objects.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Simplify the function flow, by sending the signal strength notification
in one place, the reporting_interval_work handler.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Deprecate lwm2m_set_u64() and lwm2m_get_u64 as only
LWM2M_RES_TYPE_S64 exist. Unsigned variant is not defined.
Technically these might have worked OK, but it is undefined
what happens to large unsigned values when those are
converted to various payload formats (like CBOR) that might
decode numbers differently depending of their signedness.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The length of the updated metadata was not updated.
Fixes the CAP/INI/BST/BV-13-C test case.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Always use k_thread_foreach_unlocked with callbacks which print
something out to the shell, as they might call arch_irq_unlock.
Fixes#66660.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Any received address is no longer valid once the interface goes down.
Leaving the address assigned results in the L4 interface transitioning
through the following on reconnection:
UP: Interface is connected
DOWN: Old address is removed by DHCP
UP: New address is re-added by DHCP
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Networking events are masks of bits, which are almost impossible to read
as decimal, and trivial to read as hex. Also unifies the format string
across multiple outputs for some flash savings.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
If we receive a packet where the source address is our own
address, then we should drop it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we receive a packet from non localhost interface, then
drop it if either source or destination address is a localhost
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
A bad peer responding to read-by-uuid can return handles outside the
requested range. This confuses the stack. In particular, the "continue"
and "end" logic in the same function relies on this assumption.
This bad peer was a real issue at UPF, and it caused an infinite loop
during discovery.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/50686
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Allow engine to give hints about ongoing CoAP transmissions.
This information can be used to control various power saving
modes for network interfaces. For example cellular networks might
support release assist indicator.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In slow networks, like Nb-IOT, when using queue mode,
there might be significant delay between the time we
put the packet into a transmission queue and the time
we actually start transmitting.
This might cause QUEUE_RX_OFF state to be triggered earlier
than expected. Remedy the issue by updating the timestamp on the
moment where packet is accepted by zsock_send().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In case a waiting TLS socket reports an error in the underlying poll
call, try to read the actual error from the socket, instead of blindly
returning -EIO in all cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are several subsystems and boards which require a relatively large
system heap (used by k_malloc()) to function properly. This became even
more notable with the recent introduction of the ACPICA library, which
causes ACPI-using boards to require a system heap of up to several
megabytes in size.
Until now, subsystems and boards have tried to solve this by having
Kconfig overlays which modify the default value of HEAP_MEM_POOL_SIZE.
This works ok, except when applications start explicitly setting values
in their prj.conf files:
$ git grep CONFIG_HEAP_MEM_POOL_SIZE= tests samples|wc -l
157
The vast majority of values set by current sample or test applications
is much too small for subsystems like ACPI, which results in the
application not being able to run on such boards.
To solve this situation, we introduce support for subsystems to specify
their own custom system heap size requirement. Subsystems do
this by defining Kconfig options with the prefix HEAP_MEM_POOL_ADD_SIZE_.
The final value of the system heap is the sum of the custom
minimum requirements, or the value existing HEAP_MEM_POOL_SIZE option,
whichever is greater.
We also introduce a new HEAP_MEM_POOL_IGNORE_MIN Kconfig option which
applications can use to force a lower value than what subsystems have
specficied, however this behavior is disabled by default.
Whenever the minimum is greater than the requested value a CMake warning
will be issued in the build output.
This patch ends up modifying several places outside of kernel code,
since the presence of the system heap is no longer detected using a
non-zero CONFIG_HEAP_MEM_POOL_SIZE value, rather it's now detected using
a new K_HEAP_MEM_POOL_SIZE value that's evaluated at build.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit 6b644dff67.
Reason: breaks Peer-to-Peer gPTP connection. A better solution should be
found to handle the optional TLV on the announce message (chapter 10.5.1
IEEE 802.1AS-2011)
Signed-off-by: Mario Paja <mario.paja@zal.aero>
The recommendation to have 20ms is fair for two
consecutive messages over a single bearer. When mesh
sends two messages it can be interpreted as two
bearers working in parallel. No need to keep
an artificial 20ms delay for that. Delay was
removed and all related bsim tests were fixed.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The implementation waited for a NET_EVENT_L4_CONNECTED event to be
emitted. However we can start the receiving thread in case the interface
is up.
This allows for IPv6 Link Local addresses to be used with mcumgr.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Implement the CAP Commander discovery function.
Adds support for it in the shell.
This includes initial babblesim and unit testing as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The condition for channel-map are CONFIG_BT_CENTRAL ||
CONFIG_BT_BROADCASTER, change the corresponding handler ifdef so that
it's included in the build if CONFIG_BT_BROADCASTER is enabled but
CONFIG_BT_CENTRAL is not.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commits create the dts binding for Ambiq BT HCI instance.
And create the SPI based common HCI driver for Ambiq Apollox
Blue SoC and the extended soc driver for HCI.
Signed-off-by: Aaron Ye <aye@ambiq.com>
Not clearing that lock lead to the fs_mgmt commands being useless, after
the mgmt callback returned `MGMT_CB_ERROR_RC` once, since the lock is now
occupied and never cleared.
Fixes#66581
Signed-off-by: Ruben Völl <ruben.voell@grandcentrix.net>
pm_suspend_devices() could return an error. Set timeout using
sys_clock_set_timeout() to after this error is handled so that
we have the accurate power state when calling the timeout function.
This is useful in cases where we wish to compensate the
system timer for certain power modes.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Adds test that verifies correct Proxy advertisement behavior for
a device where the Proxy adv requirements changes over time,
both for single and multiple subnets.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Refactors proxy advertising implementation to allow fair sharing of
advertising resources between all subnets.
In the new implementation, each subnet is agnostic to any other subnet
that might have active proxy advertisement work. When proxy
advertisement is triggered, the implementation will first check how
many subnets that has active work. If there are more than one active
subnet, a maximum timeslot will be calculated to ensure that all active
subnets get access to the medium. The implementation will then poll
the next eligible subnet for a proxy advertising request. If the
duration of this request exceeds the maximum timeslot, the duration
for the next advertisement will be set to the maximum value.
If a proxy advertisement for a subnet is interrupted by other
advertising activity, the implementation will now ensure that the
interrupted proxy adv continues from the point where it was
interrupted so that the subnet gets to utilize the entire allocated
timeslot.
This PR also alters the priv_proxy_net_id_multi Bsim test to align
with the refactored proxy advertising scheme.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The section 3.7.3.1 of the mesh specification recommends to delay
a message publication in certain cases:
- at power-up or upon state change for a time between 20 to 500 ms
- for periodic publications for a time between 20 to 50 ms
This change implements this recommendation by adding the
`CONFIG_BT_MESH_DELAYABLE_PUBLICATION` Kconfig option which enables
the randomization code and by adding the `bt_mesh_model_pub.delayable`
bit field which allows each model decide whether the publications
should be delayed for this model or not.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Zephyr does not support MLDv1 (which has a shorter header than MLDv2),
and this resulted in log errors being printed on header access if MLDv1
queries were received. Since receiving such packet is not really an
error, just drop it silently.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update coap_service_send and coap_resource_send to take an optional
pointer argument to the newly introduced coap_transmission_parameters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
AP enable takes the same parameters as connect, so, update the help and
also fix the optional parameter count when security is involved.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is just as arbitrary as what was before, but simpler.
Before this change, the callback were invoked upon receiving the num
complete packets event.
This did not necessarily work with all spec-compliant controllers.
Now the callback is invoked as soon as the lower layer destroys the
buffer. ATT shouldn't care whether L2CAP sends it over RFC1149 or
something else after that point.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Why?
- metadata is easier to manage as an array + index
- less error-prone -> less memory-management bugs
- we can. because of the previous refactor
- PDU allocations are more predictable
- ATT buffer size can be optimized by app
- isolates ATT from the rest of the ACL users
- decouples ATT PDU size from e.g. SMP w/ LESC
Drawbacks:
- higher memory usage
- kconfig change
The higher memory use is only temporary, as this will be followed-up
with more refactors that should bring it back down.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Simplify track and group changes by moving the
notifications into the functions that changes the states.
This removes some code duplication, and makes the code easier
to read, as well, as ensuring that notifications are always
sent.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The set_track_position handles both correct clamping of the
position, as well as the notification, so use that instead
of setting the value and sending notifications manually.
Also adds a new function, set_relative_track_position,
to help set relative positions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add macros to initialize full set of descriptors required for USB Audio
Class 2 instance. Descriptors start with Interface Association
Descriptor that binds together the AudioControl interface and all
AudioStreaming interfaces.
AudioStreaming interfaces have alternate setting 0 without any endpoints
and alternate setting 1 with isochronous endpoint with max packet size
calculated on maximum sample frequency, number of channels, subslot size
and clock synchronization (asynchronous endpoints require +1 sample).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Initial set of macros to generate class specific descriptors based on
devicetree nodes. Descriptors are generated as uint8_t array initializer
list because there is variable number of entities in between standard
USB interface and endpoint descriptors. Because the descriptors are
automatically generated there is no real point in trying to generate
corresponding C structures (especially that some entity descriptors have
variably sized fields in the middle of descriptor, e.g. Clock Selector).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
In case one of the networking shell backends is enabled, net arp command
could potentially trigger a deadlock, as it locks the ARP mutex before
TCP connection mutex, while TCP stack could do this in reverse order
(for instance when sending ACK or retransmission).
Mitigate this, by forcing a separate TX thread in such case, so that ARP
mutex is no longer accessed with TCP mutex locked.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixed the stream_start_sine function when omitting the all argument.
The verification of the sine checked reversed return value, and was
placed in incorrect order.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
This fixes regression introduced in recently.
Redundant connection reference is taken twice in connected()
callback. The redunant reference was then not returned, and
as a result we had a leak.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Replace function parameter 'retries' with pointer to structure
holding coap transmission parameters. This allows setting the
retransmission parameters individually for each pending request.
Add coap transmission parameters to coap_pending structure.
Update migration guide and release notes.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Similar to what is done in pm_device_runtime_get,
we don't need to wait the device be suspended if
the work is still in the work queue. In this case
we just cancel the work and update the device state
to active.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The only difference in the two enums are some entries related to
relocation sections. However, these entries are not used in the
code, so they can be safely removed, along with the mapping function.
Use LLEXT_MEM_* to avoid confusion with low-level "section" names.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Increases 2 variables to be 16-bits instead of 8-bits to allow
for target read sizes, this would only be an issue if someone
changed the default retention block size from the default value
of 16 to a value over 256
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When using multiple instances of IPC static vring, each instance
should register its shared memory with a unique name.
Instead of a predefined default name, the name of the ipc instance
is reused for the metal device name.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
The dummy L2 layer does not implement any L2 functionality
but it does not mean that it should not implement start/stop
functions that are called when the related network interface
is brought up or taken down.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is pointless to take net interface up if the underlaying
device is not ready. Set also the interface status properly
in this case.
Fixes#65423
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use correct format specifier for LOG_ERR in lwm2m_obj_device.c. The
previously used format specifier of %u was correct for 32 bit systems
but would produce a build warning for 64 bit systems.
Fixes#66441
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This starts using CONTAINER_OF macro instead of inst_by_conn function
wherever possible. It's better approach as the client instance is
a container for parameters passed to the callbacks.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
As the common.h is only meant to be used by the network
shell files, rename it to be more descriptive in order to
avoid possible conflicts with any other common.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Usually we want set all values of code triple Base Class, SubClass, and
Protocol at once. Merge existing functions to set code, subcode,
protocol into just one helper to set code triple.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Targets that have a data cache must enable CACHE_MANAGEMENT to allow the
llext API to flush it when loading an extension. This patch forces the
flag to be enabled when the target has a data cache.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The arch_* functions are architecture-specific and may not be defined in
all targets. Use the global alias defined in the Cache API instead.
Fixes#66382.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Renames "prov device" references and options to
"provisionee" to align implementation with Mesh
Protocol specification v1.1, section 5.4.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Calling the registered receive callback when releasing TCP context
doesn't make sense, as at that point the application should've already
closed the associated socket (that's one of the conditions for the
context to be released). Therefore, remove the pointless receive
callback call, while keeping the loop to unref any leftover data packets
(although again, I don' think there should be any packets left at that
point, as they're all consumed in tcp_in()).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
While improving thread safety of the TCP stack I've introduced a
possible deadlock scenario, when calling tcp_conn_close() in tcp_in().
This function shall not be called with connection mutex locked, as it
calls registered recv callback internally, which could lead to deadlock
between TCP/socket mutexes.
This commit moves the tcp_conn_close() back where it was originally
called. I've verified that the thread safety is still solid with the
test apps used originally.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This fixes the return error code for Preset Write operation that shall
be returned when preset is not writable (or disabled via Kconfig like in
this case).
As per HAS_v1.0; 3.2.2.3 Write Preset Name operation
"If the Writable bit in the Properties field of the preset record which
is identified by the Index parameter is set to 0b0, then the server
shall return an ATT_ERROR_RSP PDU to the ATT_WRITE_REQ PDU with
the Error Code parameter set to Write Name Not Allowed."
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This avoids unexpected assert that may happen when the client tries to
QoS configure ASE that is in state which does not allow to be configured.
In such case the assert shall not be not be triggered, as it's not stack
fauly. The assert check has been moved after the state check, so the ASCS
implementation will just return an error code to the client.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes CCC subscriptions that were removed if the automatic
resubscription was aborted by ACL disconnection.
As the client renews subscriptions, there is no point of removing those
if the link is disconnected unexpectedly.
The API user won't be notified about the failure, as the automatic
resubscriptions are implicit, and after reconnection the subscriptions
will be still valid.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Addresses a potential issue when the string contains only '\0',
which results in z_shell_strlen(str) returning len as 0.
Since the for-loop expects len >= 1, the function now immediately
returns when len == 0.
As the null check for 'str' is already handled inside
z_shell_strlen(), an additional check for 'str' is not needed.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add an interface to verify and enable a test mode. The test mode
selected in the SetFeature control request must be verified to be
supported by the controller and enabled after the status stage is
completed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Not all device controllers expect the device address to be set after the
status stage. Add support to directly set a new device address without
waiting for the control request status stage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
fs_rename can handle the file move atomically without unlinking
the file first if the filesystem supports that. This change makes
the settings file more power cut resilient so that the whole
settings file is not lost with poorly timed power cut.
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
Add empty macro for net_if_mon functions if they are not otherwise
defined, like the other functions in the net_if.c file have.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
EAGAIN error is returned if the tcp window size is full. Retry
sending the packet instead of closing the connection if this
error occurs.
Also the full payload may not be sent in a single call to
net_context_send(). Keep track of the number of bytes remaining
and try to send the full payload.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Add a delay parameter to asynchronous device runtim put. This allows
to delay the put operation what is useful to avoid multiple states
transitions.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
We don't need to wait an async put to happen in case it has not
started yet. In this case we can simply cancelling the pending work
and change the internal state because the device is still active.
This way we avoid a suspend and resume cycle.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add new functions to the public CoAP API to configure CoAP packet
retransmission settings. Application may need to re-configure the
settings for example when cellular modem changes connection from
LTE-M to NB-IoT or vice versa.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
This fixes issue where API use is able to register writable preset even
if the CONFIG_BT_HAS_PRESET_NAME_DYNAMIC Kconfig option was disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Use a flag in `c:struct:mgmt_handler` to skip the cbor start and end byte,
and instead use pure custom user defined payload.
Signed-off-by: Kuno Heltborg <kunoh@live.dk>
Add the GMAP shell module with support for running the
various audio configurations in an easy way.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add initial implementation of Gaming Audio Profile (GMAP).
This is a top layer profile in the LE Audio stack,
designed for low latency audio ideal for gaming.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The number of Kconfig options for the TCP stack grew considerably,
therefore it makes sense to move them to a separate file not to bloat
the Kconfig file with generic networking options.
Take this opportunity to reorder TCP options, so that protocol
parameters (timings/buffer sizes) are not mixed up with optional
protocol features (fast retransmit/congestion avoidance etc.).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When a TCP connection is established, if there is no data exchange
between the two parties within the set time, the side that enables
TCP Keep-alive will send a TCP probe packet with the same sequence
number as the previous TCP packet. This TCP probe packet is an empty
ACK packet (the specification recommends that it should not contain
any data, but can also contain 1 nonsense byte, such as 0x00.). If
there is no response from the other side after several consecutive
probe packets are sent, it is determined that the tcp connection has
failed, and the connection is closed.
The keep-alive default parameters are aligned with Linux defaults.
Signed-off-by: Horse Ma <mawei@coltsmart.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If observed resource was written during the pMin period, it did
not schedule any wake-up event into the future. Notify message would
then only be generated as a result of any other (like Update) event.
Refactor check_notifications() to follow same pattern as retransmit_req().
Return the next event timestamp, which could be now.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The bt connect and bt connect-name commands should only
attempt to connect to connectable devices that we are not
already connected to.
This commit moves the check for BT_GAP_ADV_PROP_CONNECTABLE
as well as checks that we do not already have a connection
to that device with the current ID.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use helper function to convert string to int for appearance value.
This makes the code more clear, as the big-endian conversion function
gives the wrong impression about the byte order of advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The 2 issues were found after CONFIG_OSDP_SC_ENABLED was enabled:
- missing curly brace after if
- typo in type name
Signed-off-by: Arkadiusz Wadowski <wadowski.arkadiusz@gmail.com>
Added missing command and message handling for use existing
modem cmux for DCE role.
DCE CMUX connection can be now initialized from DTE side.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Add a "input kbd_matrix_state" shell command. This prints the state of
a keyboard matrix in a much more compact representation than the normal
input event dump, but also keeps track of any key seen during the
execution and reports that on the "off" command. The output can be used
to help setting the actual-key-mask property.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
SNTP response is not analyzed for uncertainty, and no uncertainty is given
to the `struct sntp_time` returned. Fix it with a Kconfig option that adds
optional SNTP uncertainty and timestamp fields in SNTP time struct, and
calculates these when parsing the response.
Adds two helper functions to convert Q16.16/Q32.32 in seconds to `int64_t`
in microseconds to facilitate this.
Also changes combined `lvm` field in `struct sntp_pkt` to bit-fields
`li`, `vn`, and `mode`.
Signed-off-by: Jasper Smit <git@jrhrsmit.nl>
This error message may confuse when `CONFIG_BT_MESH_ACCESS_LAYER_MSG` is
enabled and all messages are processed by the callback anyway.
This error message also confuses when a node is subscribed to the same
address as it publishes to, which makes it generating the error message
every time it publishes a message.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This change allows a custom RPL use pending mechanism and the mesh
settings work to store pending RPL entries. `bt_mesh_rpl_pending_store`
is a public API and should be implemented anyway. The custom RPL
implementation has to trigger settings with the
`BT_MESH_SETTINGS_RPL_PENDING` flag to ask the mesh settings work to
call `bt_mesh_rpl_pending_store`.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Don't assert that `pm_device_runtime_get` is not running in an ISR
context, as `runtime_suspend` properly handles that condition.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Modify the VCP volume controller callbacks to support
multiple registers by making it into a linked list.
This allow for multiple applications to get the information
from procedures or notifications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add const prefix for service uuid and char uuid.
Since Service UUID and Char UUID should not change in the service
definition, they are most reasonably defined as rodata, also for
save some ram footprint.
The field `attr->user_data` type is `void *`, as this PR change
all Service UUID to rodata, so there must add (void *) to avoid warning.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add Kconfig choice for the user to select how Network Events are
handled. It's own thread, the system work queue or synchronous when
events are emitted.
By default a separate thread is created to be backwards compatible.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The CAP Initiator and the CAP Commendar share quite a lot of
functionality in terms of discovery and performing set-based
procedures.
The code for handling most of this has been moved to
cap_common.c to avoid duplicating code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Prevents the user from potentially bricking a device by erasing
the MCUboot or currently running application flash areas with the
mcuboot erase command
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
It's bad form, especially since in that case, it's always the same function
that is called `bt_att_sent()`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This reverts commit 5227f24815.
The coap observer events will be replaced with net_mgmt events.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Dynamic command handlers should be fully initialized to avoid undefined
behavior. Also, fix the number of arguments required by each command,
since llext_call_fn requires both the llext and the name of the function
to be called.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
On architectures that have separate data and instruction caches, such as
the Cortex-M7, it is required to flush the reloc changes to the actual RAM
storage before trying to execute any code from the newly loaded llext.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
It is not safe to assume that on entry to llext_load, *ext contains
either NULL or a previous reference to the same ext being loaded. For
example, the shell sample was passing an uninitialized value.
Initialize *ext from a search of the llext by name. If NULL, it is the
first instance of this llext (and on load error, it stays that way). If
not NULL, increment use count and return.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
`pm_device_runtime_get` and `pm_device_runtime_put` have returned `0`
when device runtime PM is not enabled since #56222. Manually checking
the state is no longer required.
Additionally, the functions have been able to run in an ISR context
since #60785, which removed the need to special case `k_is_in_isr()`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Reinstate the `SHELL_UART_DEFINE` macro and moved the struct
declarations to header file, making it possible to create
another UART shell backend instance by doing
`SHELL_UART_DEFINE()` + `SHELL_DEFINE()` + `shell_init()`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
A device can be reset before the error code list is communicated
to a LwM2M server so optionally store error list in settings so it
can restored after reset.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
To avoid having "notification scheduled in 0ms" in the log,
check to verify that the delay is not K_NO_WAIT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds the function that sets the available contexts value per
connection object so that API user can set different available contexts
per connection.
The lifetime of such overriden value is the same as connection lifetime,
so on reconnection or device reboot all devices return to having the
same available contexts value again.
Fixes: #64968
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes client lookup that was done with use of bt_conn_index while
the size of the client array is CONFIG_BT_MAX_PAIRED.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Disallow further changes of supported audio contexts characteristic is
the GATT Characteristic Notify Property is not set.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Enforcing the peer's behavior is not strictly necessary. All the host
should do is make sure it is resilient to a spec-violating peer.
Moreover, a growing number of platforms were disabling the check, as the
spec allows "batching" HCI num complete packets events, stalling ATT RX.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add GDBSTUB_TRACE config option to extend GDB backend debug logging
for remote commands received and to debug the GDB stub itself.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add function to get a volume controller from a connection
pointer.
This is required for the CAP to get a vol_ctlr pointer
from the provided bt_conn.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This removes the fixed size bt_bap_base, which provides
2 improvements:
1) The RAM usage of the broadcast sink has been reduced.
For the Broadcast Sink sample it is a reduction of 120
octets, but with much better scaling for supporting
more or larger BASEs.
2) The functions to parse BASEs now support arbitrary sized
BASEs, where they were previously restricted by our
local Kconfig options. This allow us to parse any BASE
from a remote device, without encounting memory issues.
We are still memory restricted on the devices we
actually want to sync to.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Iterating over connection list w/o mutex lock could lead to a crash on
constant incoming packet flow. Fix this by:
1. Adding mutex lock when iterating over an active connection list, to
prevent list corruption.
2. Create a copy of the callback and user data pointers before releasing
lock, to prevent NULL pointer dereference in case connection is
released before callback is executed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Eliminate race between TCP input thread and TCP work queue, when
dereferencing connection. This normally would not manifest itself during
standard TCP operation, but could be a potential opening for abuse, when
the already closed TCP connection is kept being spammed with packets.
The test scenario involved sending multiple TCP RST packets as a
response to establishing the connection, which could result in system
crash. The following changes in the TCP stack made it stable in such
scenario:
1. Use `tcp_lock` when searching for active connections, to avoid
potential data corruption when connection is being removed when
iterating.
2. Avoid memset() during connection dereference, not to destroy mutex
associated with the connection. The connection context is only
cleared during allocation now.
3. Lock the connection mutex while releasing connection.
4. In tcp_in(), after locking the mutex, verify the connection state,
and quit early if the connection has already been dereferenced.
5. When closing connection from the TCP stack as a result of RST or
malformed packet, verify connection state to make sure it's only done
once, even if multiple RST packets were received.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Silently drop the IPv6 Neighbor Advertisement if we receive it
for an unknown neighbor or if there some some issue in the packet.
Returning error here would cause the ICMP module to print an
actual error which just pollutes the log without any apparent
benefit.
Fixes#66063
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Enable the automatic power domain management to release the domain as
many times as it was claimed, instead of only once.
This fixes the domain being permanently enabled if the supported device
is claimed more than once.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
If server registration fails, allow fallback to secondary server,
or fallback to bootstrap.
Also allow fallback to different bootstrap server.
Add API to tell RD client when server have been disabled by
executable command.
Changes to RD state machine:
* All retry logic should be handled in NETWORK_ERROR state.
* New state SERVER_DISABLED.
* Internally disable servers that reject registration
* Temporary disable server on network error.
* Clean up all "disable timers" on start.
* Select server first, then find security object for it.
* State functions return void, error handling is done using states.
* DISCONNECT event will only come when client is requested to stop.
* NETWORK_ERROR will stop engine. This is generic error for all kinds
of registration or network failures.
* BOOTSTRAP_REG_FAILURE also stops engine. This is fatal, and we cannot
recover.
Refactoring:
* Server selection logic is inside server object.
* sm_handle_timeout_state() does not require msg parameter. Unused.
* When bootstrap fail, we should NOT back off to registration.
This is a fatal error, and it stops the engine and informs application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
React to disable executable, as well as add callback that allows
disabling server for a period of time.
Also add API that would find a next server candidate based on the
priority and server being not-disabled.
Move all server related functions into its own header.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This board have an NXP MPU with 8 configurable regions, of which five
of them are already used by the static MPU configuration. Many of
these tests are failing due to lack of MPU regions or free partition
slots available, even when HW stack protection is disabled when
building with userspace support.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Fixing typo from the original implementation in
44705b698c725166834f19d6fd5db2804f9a0d60, which resulted in
the name of current shell instance getting print over and over
again.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The current code triggers a false positive from the heuristic "Macro
compares unsigned to 0". It's triggered because of a use of `IN_RANGE`
that checks against the extremal values of a enum type.
This patch replaces the use of `IN_RANGE` with an explicit list of the
possible values of the enum.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/65575
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
We are creating a multicast address in mDNS or LLMNR
responder so set the TTL or hoplimit using the multicast
variant API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We specifically set TTL/hoplimit to 1 for LLMNR,
but only want to set it if in that specific case.
We must not pass TTL/hoplimit value 0 as that would
cause the packet to be dropped.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
* Check IPv4 TTL or IPv6 hop limit and drop the packet if
the value is 0
* Check the IP addresses so that we do the loopback check
at runtime if the packet is destined to loopback interface.
* Update the statistics properly for dropped packets.
* Do not update sent packets if we drop packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPv4 TTL could only manipulated via net_context interface.
It makes sense to allow the same from socket interface via
the setsockopt/getsockopt calls.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_if_ipv6_set_hop_limit() API was missing the "_if_"
part in it. Fix this so that the network interface API is
consistent. The old function is deprecated and should not
be used. The old function is left to the code and it calls
the new properly named function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Disables Mesh advertising when suspending, and enables advertising
when resuming Mesh.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds a disable function for the extended advertising which stops and
deletes the advertising instances, allowing them to be properly
reinitialized when calling `bt_mesh_adv_enable()` after bluetooth has
been disabled and re-enabled.
For the legacy advertising, the function terminates the advertising
thread. If legacy advertising is used, `bt_mesh_adv_init()` must be
called before `bt_mesh_adv_enable()` to properly resume advertising
after suspension.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
This was somehow missed, but since ICMP rework, message handlers should
not dereference the packet, as it's done by the ICMP lib.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Commit 55802e5e86 fixed error handling of
TX errors, in case ARP request was generated. There are however also
other places where post-ARP cleanup should be done on the TX path (like
running out of buffers for Ethernet L2 header allocation).
This commit fixes those cases in ethernet_send(), where function would
exit early and report error after ARP prepare stage.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Long arguments are handy for new users. Also use hyphen's rather than
underscore to follow the convention.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Newly added security types are missing from the help. Also, now that we
have two variants of PSK, use the prefix to disambiguate.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When interface names are enabled, a default name is applied
after initialization. Unintuitively, this overwrites any name that is
set during the net_if init.
This change sets a default name first, and then allows net_if
init to overwrite that default name if it chooses to.
Signed-off-by: Noah Luskey <noah@silvertree.io>
Signed-off-by: Noah Luskey <LuskeyNoah@gmail.com>
When using the LLEXT buffer loader we now avoid copying extensions
from storage to allocated memory by pointing directly into the stored
image. We then also perform linking and relocation in that memory,
which modifies its contents. However, this is impossible if that
storage is read-only. Add a Kconfig flag to distinguish between
writable and read-only storage types. Also use that flag to decide,
whether the extension image in test_llext_simple.c should be defined
as const or not.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
a new llext object is completely initialised with zeros after
allocation, no need to additionally set members of an embedded into
it array to NULL.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
llext_list() is an exported function that returns a pointer to the
llext internal extension list. That list should only be accessible
directly inside llext, while holding a lock. Remove the function.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The llext list should be internal to llext.c, remove its scanning
from shell.c, export a function for that instead.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use an element size explicitly when calculating the array size and
use the calculated size for memset().
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Extensions should be able to selectively export their global symbols.
Add a LL_EXTENSION_SYMBOL() macro for that. Change the present
.sym_tab to be a temporary symbol table of all global symbols in an
extensions, used only during linking for internal purposes. Add a new
.exp_tab symbol table to store symbols, exported by an extension
permanently.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
If a function fails it should release all the resources it has
managed to acquire. Fix llext_load() to free memory that it has
allocated in case of an error.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Extend the llext_load() / llext_unload() API to let it be called
repeatedly for the same extension to increment or decrement its
reference counter respectively. We use a mutex to protect the counter
and make both llext_load() and llext_unload() return the use-count to
let the caller identify when the first loading and the last unloading
took place.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Loadable modules can contain global (not "static") functions, even if
they aren't exported for use by other modules, e.g. when a module is
built from multiple .c files. Such functions are then also included
in link tables and have to be re-linked.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
llext_seek(), llext_read() and llext_peek() are needed outside of the
extension code too, move them to a header.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Some applications can decide to link their loadable objects for
exactly the same addresses, where they will be loaded. In those cases
local relocations aren't needed any more and can in fact break the
object if applied while the object is in a temporary storage. Add a
parameter to skip such local relocations.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Export some symbols for loadable modules. Also add an
EXPORT_SYSCALL() helper macro for exporting system calls by their
official names.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Applications can use custom ELF sections for their own purposes, add
a function for finding them.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add support for relocating local symbols, as specified in the
.rela.dyn section.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add support for linking PIC shared object, which only require
linking, using their PLT and GOT lists and don't need any relocation
otherwise.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
While printing SSID in wifi status command, If the
length is maximum(32 character). It leads to buffer
overflow. It required one character for null
terminator ‘\0’. Changing the Format Specifiers to
print proper SSID.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
This fix addresses wrong announce message length warning message.
TLV is a variable length (4+8N) based on the 802.1AS-2011 (table 10-8). In
Zephyr TLV is fixed to 12 bytes. TLV type and length are already taken
into account in the announcement message length.
Signed-off-by: Mario Paja <mario.paja@zal.aero>
BAS v1.1, section 3.1.2.1 notes that a CPF should be added if the
device has more that one instance of the Battery Service, so
add one with the `main` description so that apps can add additional
Battery Level services with other descriptions, e.g. `auxiliary`.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
Set the static initialiser socket file descriptor to -1 to make sure
it is invalid before using coap_service_send.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add extra checks that make sure that msg_iov is set
as we cannot receive anything if receive buffers are
not set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
SIG has changed Bluetooth mesh to Bluetooth Mesh
Updating zephyr docs accordingly
Leaving out old release notes
Signed-off-by: Mia Koen <mia.koen@nordicsemi.no>
Even though the ASCS Sink ASE state machine does not enter the disabling
state according to ASCS spec, it still makes sense to do so.
the state transition unit tests are updated to verify calling or not
calling the disable callback, depending on the transition of the state
fixes#63230
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The BIS_Sync bitfiled received over the air in Add Source and Modify
Source operations uses BIT(0) for BIS Index 1. Shift it when storing
it to match bis_sync bitfield where BIS Index 1 is at BIT(1).
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
bis_sync contains BIS index bitfield which is shifted by 1 bit relative
to the BIS_Sync parameter of Broadcast Receive State notification.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Fix two issues with sending ICMP Echo Reply for requests sent for
multicast address:
* Use the originator IP address instead of multicast when selecting
source address for the reply
* In case no address match is found, drop the packet, instead of
replying with unspecified address.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CoAP request handler returns errno codes in the following cases:
* ENOENT if no handler found; respond with 4.04
* ENOTSUP if an unknown request code received; respond with 4.00
* EPERM no handler found for the method; respond with 4.05
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Fix the possible race between TCP work items already scheduled for
execution, and tcp_conn_unref(), by moving the actual TCP context
releasing to the workqueue itself. That way we can be certain, that when
the work items are cancelled, they won't execute. It could be the case,
that the work item was already being processed by the work queue, so
clearing the context could lead to a crash.
Remove the comments around the mutex lock in the work handlers regarding
the race, as it's not the case anymore. I've kept the locks however, as
they do make sense in those places.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
EATT is the only user of `bt_l2cap_chan_send_cb`, and not necessary. We
can maintain the same functionality without it.
Instead of passing and storing the callback into l2cap, we can store it
in a callback queue in the ATT bearer struct.
This will allow us to remove that internal API later, in order to
streamline the l2cap API.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Replace hardcoded value `8` with `CONFIG_BT_CONN_TX_USER_DATA_SIZE`,
that is `8` but is going to change.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
If some specific option is not enabled, then add missing
ARG_UNUSED() calls in relevant functions.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option setters for bool, uint8_t and uint16_t
values. Use those generic setters when storing the desired
option value.
The uint16_t option setter stores the value to uint16_t variable
and expects that user supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option getters for bool, uint8_t and uint16_t
values. Use those generic getters when fetching the desired
option value.
Noticed mixed usage (bool vs int) for txtime option. Changed
the code to use int type like in other options.
The uint16_t option getter gets the value from uint16_t variable
but returns int value to the caller, and also expects that user
supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
slab_buff size is calculated based on size of osdp_ephemeral_data union
so it is safer to use same structure for slab init.
Changes in osdp_event or osd_cmd structures can cause crashes without this.
Signed-off-by: Arkadiusz Wadowski <wadowski.arkadiusz@gmail.com>
This allows external applications wishing to report coverage data over
different interfaces the ability to do so by exposing the gcov list.
Signed-off-by: Joshua Lilly <jgl@meta.com>
This allows HCI drivers to expose vendor-specific functions to set the
public address.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
The Zephyr's core ethernet code had to be adjusted to support setting T1S
PLCA parameters from user Zephyr programs.
Such approach allows more flexibility, as T1S network configuration;
especially PLCA node numbers, can be assigned not only via device tree
at compile time. For example user can read them from EEPROM and then
configure the network accordingly.
For now - the union in struct ethernet_t1s_param only consists of plca
structure. This can change in the future, when other T1S OA parameters -
like Receive/Transmit Cut-Through Enable (bits RXCTE/TXCTE in OA_CONFIG0
register) are made adjustable from user program.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
As other helper functions were introduced for the LE Power Control
Request Feature (see CONFIG_BT_TRANSMIT_POWER_CONTROL), it was noticed
that the return statements of switch cases should be on the next line
generally. This will align phy2str with the rest in bt.c.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
To use LE commands of Le Power Control Request Feature one must utilize
the BT_TRANSMIT_POWER_CONTROL config.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
This commits adds the LE API's for the LE Power Control Request Feature
in Zephyr.
The support of feature is provided with the controller-based feature
selection with BT_CTLR_LE_POWER_CONTROL_SUPPORT and is selectable via
BT_TRANSMIT_POWER_CONTROL.
With the new APIs, the applications will:
get improved reading of local and remote tx power
be aware of changes in remote or local tx power
Defined HCI commands in Core Spec v5.4:
7.8.117 LE Enhanced Read Transmit Power Level command:
improvement to existing local tx power reading.
7.8.118 LE Read Remote Transmit Power Level command:
Remote tx power is read through an event (LE Transmit Power Reporting)
7.8.121 LE Set Transmit Power Reporting Enable command:
Enables local or remote tx power reporting to monitor changes in tx power
7.7.65.33 LE Transmit Power Reporting event
Note: to utilize the Feature fully Nordic-LL-only vendor-specific commands
are needed. These will not be added in RTOS zephyr but instead
implemented in a maintainable way in sdk.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Protected credential storage makes use of the PSA API, therefore it must
be present in the library include path. This was missed during the
recent CMakeLists.txt rework of this library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix l2cap error handling generally not properly disposing of tx buffers for
enhanced channels; Any callbacks have to be called and the
l2cap_tx_meta_data has to be freed
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
atomic_*_bit functions work with atomic_t arg as with array, therefore
the atomic variable should be declared using ATOMIC_DEFINE.
Coverity-CID: 333358
Fixes#65588
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Regular OpenThread upmerge to commit `75694d2`.
Move CONFIG_OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE
from header file to Kconfig.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
If we for some reason are supplied unsupported socket type in
recvfrom(), then return ENOTSUP error to the caller instead of
silently accept it by returning 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user has set either IP_PKTINFO (for IPv4) or
IPV6_RECVPKTINFO (for IPv6) socket options, then the system
will return relevant information in recvmsg() ancillary data.
Fixes#36415
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_PKTINFO or IPV6_RECVPKTINFO BSD socket options that
can be used to get extra information of received data in
the ancillary data in recvmsg() call.
For IPV6_RECVPKTINFO see RFC 3542 for details.
For IP_PKTINFO see Linux ip(7) manual page for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add low level support for setting IP_PKTINFO or IPV6_RECVPKTINFO
socket options. The support is disabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Using this new library it is now possible to leverage the memory
attribute property 'zephyr,memory-attr' to define and create a set of
memory heaps from which the user can allocate memory from with certain
attributes / capabilities.
When the CONFIG_MEM_ATTR_HEAP option is set, every region marked with
one of the memory attributes listed in
include/zephyr/dt-bindings/memory-attr/memory-attr-sw.h is added to a
pool of memory heaps used for dynamic allocation of memory buffers with
certain attributes.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This removes spurious error message printed when CIS has been
disconnected and it was not used by any of the endpoints.
This case is valid and may happen on Connection Timeout when the
controller reports ACL Disconnection first.
When the CIS Disconnection is reported after, the ASE is already in idle
state and the referenece to CIS has been already removed (on ACL
disconnection).
Fixes: #64896
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Revert back to implementation that did early abort of
previous prepare when a short prepare is enqueued.
Adds back implementation deleted in
commit 7f388bb70a ("Bluetooth: Controller: Fix short
prepare when many enqueued in pipeline").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactor of Kconfig order such that the advanced
feature Kconfig is just above the enabling/visible of the
advanced features menu.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The original SHI module only has one output FIFO buffer. It costs a lot
when the driver has to send/change the protocol control code because it
must fill out all 128 bytes of output FIFO. In npcx4, we introduce
another output buffer in 1-byte depth. These two buffers can switch back
and forth during the transaction. We can use the single-byte buffer
to send the control code and the 128-byte FIFO to send the data payload.
It helps improve the SHI driver's efficiency.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Implement the pm_policy lock to prevent the chip enters the deep slepp
mode while shi transaction is ongoing.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Changes of call state were not notified. Fixed by calling notify_calls
in respective functions.
Signed-off-by: Lukas Streitenberger <lukas.streitenberger@wsa.com>
Since sending of public key was moved into system
work (https://github.com/zephyrproject-rtos/zephyr/pull/62331)
it uses the same context as a Host Tx buffer
allocator for gatt sending. Host cannot wait for
free buffer anymore. Mesh requires 4 buffers
to send max size frame(public key) during
provisioning.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Logging shall not use character pointers with %p because in
certain configurations it may lead to memory faults. A compile
time detection is added. If faulty usage is detected then
message is replaced with error message which indicates which
message failed and what shall be done (casting to a pointer
of different type).
Validation is enabled only for configurations which remove
strings from binary as otherwise it may impact CI execution
time.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
By making short inputs optional, the user can bypass short-events all
together if necessary (e.g. custom button-press listener).
Signed-off-by: Juliane Schulze <juliane.schulze@deveritec.com>
This moves including of demand_paging.h out of kernel/mm.h,
so that users of demand paging APIs must include the header
explicitly. Since the main user is kernel itself, we can be
more discipline about header inclusion.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Initially, the command/reply ID byte was not part of the data length
macros. But later, when it was changed to include it, the buffer length
checks was not adjusted. Due to this, we were not using the last byte in
the buffer. Fix this issue by correcting the condition.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Commit c7fec71193 ("mgmt/osdp: Add length checks for commands and
replies") attempted to remove code duplication by adding a macro to perform
a length check. At the time, a CI linter did not like macros with control
flow so the code was switched to a method which called __ASSERT() on this
condition.
The __ASSERT() macro is a nop if CONFIG_ASSERT=n (which is the default) and
causes the buffer access to be unguarded which may lead to OOB accesses.
This patch fixes the issue by reintroducing the if check.
Fixes: c7fec71193.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Zbus uses mutexes internally that are available
only when MULTITHREADING is enabled so add
it to fix the following error:
/opt/zephyr-sdk-0.16.3/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/
12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd: zephyr/subsys/
zbus/libsubsys__zbus.a(zbus.c.obj): in function `k_mutex_init':
/builds/zephyr/mcuboot/zephyr/include/generated/syscalls/kernel.h:969:
undefined reference to `z_impl_k_mutex_init'
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Improved the updates to the name ID metadata (NVS_NAMECNT_ID) item
in the Settings NVS backend implementation. The improvements should
make the implementation more robust in handling edge cases such as:
power downs, resets or a case in which the storage partition is
full. In the last case, the NVS backend could return an ENOSPC error
in the context of the settings_delete API. This change also fixes
this issue.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When a client uses wildcard subscription and a new message is
published to the matching topic for the first time, the gateway
sends REGISTER message to the client, containing the exact
topic name and a new topic ID.
This change fixes adding these topic ID and name to the internal
topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Add a function to MQTT-SN library API to get topic name by ID
from the internal topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
This adds non-volatile settings for the HAS Server. Those are needed to
restore the client awareness of preset list entries exposed by the
server. Based on the settings, the implementation determines how to
notify the client about the HAS related characteristic value changes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Added igmpv3 support based on the already existing structure for igmpv2.
The already existing api is not modified to prevent breaking exisiting
applications.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Added igmpv3 checksum function to make it possible to calculate the
checksum of a complete igmpv3 pkt at once.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Fix the CMakeLists of the tls_credentials and sockets folders
to link/interface to the net library instead of the zephyr library.
This fixes issues where some files are not found in the link interface
when compiling the sources in this folder.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Make sure we send the entire packet buffer before bumping the packet
counter, send() does not guarantee that all of the requested data will
be sent at once with STREAM socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case underlying socket reported error while waiting for TX, the
errno value was not set accordingly. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Otherwise, if the application was for example blocked on poll() pending
POLLOUT, it won't be notified.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework how data is queued for the TCP connections:
* net_context no longer allocates net_pkt for TCP connections. This
was not only inefficient (net_context has no knowledge of the TX
window size), but also error-prone in certain configuration (for
example when IP fragmentation was enabled, net_context may attempt
to allocate enormous packet, instead of let the data be fragmented
for the TCP stream.
* Instead, implement already defined `net_tcp_queue()` API, which
takes raw buffer and length. This allows to take TX window into
account and also better manage the allocated net_buf's (like for
example avoid allocation if there's still room in the buffer). In
result, the TCP stack will not only no longer exceed the TX window,
but also prevent empty gaps in allocated net_buf's, which should
lead to less out-of-mem issues with the stack.
* As net_pkt-based `net_tcp_queue_data()` is no longer in use, it was
removed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new function to allocate additional buffers for net_pkt, w/o any
additional preconditions/checks. Just allocate what was requested.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The UART flush is not relevant for the async UART implementation.
UART drivers should handle this internally.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Use single ring buffer and protect it with a spinlock as it is
shared between backend and UART thread (ISR). This is simpler
than the double ring buffer setup.
The receive idle timeout has also been made configurable
instead of being a hardcoded value.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The current implementation only waits for the RX disabled event
to determine if the UART is closed. It should wait for all RX
buffers to be released, and the TX to be done as well.
We now also call uart_tx_abort() when closing the pipe.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
RSRQ is the ratio between send and received signal strength and usually
understood/expected to be represented as a ratio in dB and as such always
has a negative range. So to allow RSRQ to be represented correctly the
resource must allow negative values, but currently it's limited to unsigned
8bit integers.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
BINDESC can be used with any POSIX arch based target,
not just native_posix.
Fix the kconfig filter and the sample yaml filter.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Possible NULL pointer dereferences where discovered by static
code analysis, they are addressed in this commit.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Network interface numbering starts from 1, therefore when accessing
help/index array, the interface index should not be used directly, but
rather decremented by 1, to avoid out-of-bound access on those arrays.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that the error message does not overflow the transmit buffer
when copying the error message string.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's not really much to do when the transmission of the error reply
fails, but we can at least log the failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The result of string to float conversion in LwM2M shell write command
was not verified, which could result in incorrect data being written to
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix potential integer overflow by casting one of operands to int64_t.
Coverity-CID: 329961
Fixes#65356
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The Private Beacon Client API requires a response argument to allow to
call the API in the asynchronous manner
(https://github.com/zephyrproject-rtos/zephyr/pull/56426).
Because the removal of the EXPERIMENTAL tag for this API was not
released yet, it should be OK to change this API.
The EXPERIMENTAL tag has been removed here:
https://github.com/zephyrproject-rtos/zephyr/pull/64866
Coverity-CID: 330039
Coverity-CID: 330029
Coverity-CID: 329977
Fixes#65336Fixes#65338Fixes#65354
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Verify the return value of net_pkt_skip() function, in case the parser
ignores the unrecognized options, so that in case the option was
malformed and the actual provided option length exceeds the packet
length, it is recognize (net_pkt_skip() should fail then).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As reported by Coverity, cpkt was being used before checking it's not
NULL.
Fixes#65372 / CID: 323075
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
the reason is that the Mesh Profile clearly stipulates that Mesh nodes
cannot change their own element definitions.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Do not enable subsystem/driver shell modules by default and stop abusing
CONFIG_SHELL_MINIMAL, which is internal to the shell subsystem, to decide
when to enable a driver shell.
The list of shell modules has grown considerably through the
years. Enabling CONFIG_SHELL for doing e.g. an interactive debug session
leads to a large number of shell modules also being enabled unless
explicitly disabled, which again leads to non-negligible increases in
RAM/ROM usage.
This commit attempts to establish a policy of subsystem/driver shell
modules being disabled by default, requiring the user/application to
explicitly enable only those needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Since lwm2m_load_tls_credentials(ctx) will assume that the ctx has a
valid security object assigned to it, it should not be called at all
when ctx.use_dtls == false.
This solves a major bug where LwM2M comms are DTLS encrypted but FOTA is
allowed to be plain-text.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
No issues with gcc but clang gives this error for
the *v4 variable few lines below.
.../lib/dns/mdns_responder.c:712:2: error: expected expression
struct net_context *v4;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of just listening first network interface in the system,
install a multicast listener to all available network interfaces.
Fixes#18748
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a helper macro that can be used at runtime to return
the number of network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to bind to different network interface. This is
useful if binding a multicast address to a certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Symbopl tables of ELF objects of type ET_REL contain offsets instead
of addresses as for ET_DYN.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
A common pattern is used throughout llext.c:
ext->mem[ldr->sect_map[sym.st_shndx]]
where ldr->sect_map[sym.st_shndx] actually contains indices from
enum llext_section but ext->mem[] is indexed, using enum llext_mem
values. Fix this by changing ldr->sect_map[] to actually contain
enum llext_mem values.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The symbol count in struct llext_loader is redundant, we already have
one in struct llext_symtable, accessible via struct llext. Remove the
redundant copy.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Simplify llext_copy_symbols() by using a local variable to store a
pointer.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Instead, `sc_indicate` is defined as a no-op when if would previously
not be defined.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
For native_sim we need to have the fuse library linked with the
native simulator runner, not with the embedded code.
Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
LOG_PRINTK needs to run in supervisor mode and since there
is no syscall that allows it to be called from userspace, this
option has to be disabled when userspace is selected.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This syscall is completely problematic in userspace, it does
not check ANY parameter that is given and it uses variadic argument
that are not copied / checked before being used in the implementation,
instead it just pass a pointer to user stack with unknown data is
blindly consumed by the kernel.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Previous implementation didn't work if CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD
was set to 1. Minmimum value that worked was 2. A value of 1 would
just be ignored and act like 0 with threshold triggerring disabled.
Signed-off-by: Mike J. Chen <mjchen@google.com>
`smp_shell_input_timeout_handler`. Create a public function in
the `shell_uart.c` for it to get the pointer to the
`smp_shell_data` and fix the compilation error.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
str_cnt in llext_find_tables() is actually used to count sections,
rename it to better match that usage.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use .sh_entsize instead of sizeof(elf_rel_t) to make code suitable
for both REL and RELA types.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Several cosmetic changes with no change in functionality:
The pos variable in multiple functions is used as a loop variable -
it's initialised before the loop starts and then it's incremented for
each loop iteration. Move it to the loop header for readability.
"return ret" is clearer than "goto out" where the "out" label does
nothing but "out: return ret" because one sees immediately that the
function is terminated at that location with no further actions
without the need to check the "out" label.
k_heap_free(heap, NULL) is valid, no need to check the address to be
freed for NULL.
Object counters can be simple (unsigned) integers, no need to make
them size_t or elf_word.
"return 0" is simpler than "return ret" because it shows the return
value immediately without the need to check what it can be at that
location.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This adds retry logic for ASE state notifications if failed due to
insufficient number of buffers to send ATT PDU. The state transition is
retried after connection interval delay.
Fixes: #64574
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The use case is to have a netbuf pool that is used exclusively with
net_buf_alloc_with_data() where the destroy callback takes care of
freeing the actual data buffer pointed to by __buf.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Separate queue should also used for lagecy adv, due to
when local queue has adv buf, k_poll will process local queue.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Compile the `uart_dev` pointer only when necessary
(when `zephyr,log-uart` is used), this saves 4 bytes in
32-bit systems and 8 bytes in 64-bit systems.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Rename the `device` variable in the `struct lbu_cb_ctx` to
`uart_dev`, as it is a convention in Zephyr to not have the
struct variable name after the struct.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Updated the `LBU_DEFINE` so that the index is appended only
when given to improve backward compatibility.
When it is depending on the `zephyr,console` node, the backend
is defined as `log_backend_uart`.
When it is depending on the new `zephyr,log-uart` node, the
backend is defined as `log_backend_uart0`,
`log_backend_uart1`, and so on.
Updated the names of the internal variables to follow the same
naming convention.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
When UART asynchronous API support was added to shell it was set up
to be the default one and was turning on asynchronous API if it was
supported. However, it may lead to complation failures if device
requires additional setup for asynchronous UART (e.g DMA in device
tree). Becuase of that, it is reverted back to use interrupt driven
API and use asynchronous API if it is already enabled in the
application.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
SMP shell was looking into internal shell uart structures to get
uart device. This structures are now internal to the shell and
cannot be used. Using device tree chosen instead.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Fixing compilation failure due to treating void pointer as uint8_t
array. Added missing casting.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Adds a shell interface for TLS Credentials, allowing management of
credentials via the Zephyr shell
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add (internal) support for sectag iterating.
Also officially marks negative sectag values as reserved for internal
use.
This will allow a prospective TLS credentials shell to iterate over all
available credentials.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds an internal credential_digest for generating a string digest of
credentials.
Such digests would allow users of a prospective TLS credentials shell to
verify the contents of a given credential without directly accessing
those contents.
Offloading the digest process to the underlying backend allows backends
for which private portions are not directly accessible to be eventually
supported.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add implementation to reduce CIG's CIS retransmissions so as
to meet the Host requested Maximum Transport Latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a Kconfig option that makes the RPA sharing feature optional. By
default, the Zephyr Bluetooth stack now uses the RPA rotation policy
that was active before the introduction of the RPA sharing functionality
in the following PR:
https://github.com/zephyrproject-rtos/zephyr/pull/55449
The new Kconfig option configures the advertising sets linked with the
same Bluetooth identity to use the same Resolvable Private Address in
a given rotation period. After the RPA timeout, the new RPA is
generated and shared between the advertising sets in the subsequent
rotation period.
When this option is disabled, the generated RPAs of the advertising
sets differ from each other in a given rotation period.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Rework UART backend to clearly use single instance approach as
before it was a bit messy with some parts of implementation indicating
multi-instance approach and some single instance. Backend has been
around for years and multi-instance requirement never came.
Added support for UART asynchronous API which is more efficient
in terms of power consumption and performance. Asynchronous API
support is using uart_async_rx helper module for handling data
received asynchronously.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Statically initialise the callback list so that subscriptions can be
registered before the call to `bt_enable`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The icmsg and icmsg_me backends has limitations in context of
concurrent access to single instance. Some limitations are:
* sending by more thread at the same time may cause -EBUSY
* allocating TX buffer will cause errors in other threads that want
to allocate before first thread sent the message,
* during no-copy receive, when RX buffer is on hold receiving is
totally blocked.
This backend resolves those limitations by adding dynamically allocated
buffers on shared memory next to ICmsg circular buffer. The data is
passed using those buffers, so concurrency is not a problem. The ICmsg
is used only to pass short 2-byte messages containing references to
those buffers. The backend also supports multiple endpoint.
The ipc/icmsg_me sample was modified to support this backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
This avoids duplication of the function signature in several places and
makes the API documentation more clean.
Signed-off-by: Martin Jäger <martin@libre.solar>
Rename the lorawan_set_battery_level_callback to
lorawan_register_battery_level_callback to make it consistent with other
functions for downlink and data rate changed callbacks.
Also making the function void for consistency. The get_battery_level
already checks if the callback is NULL before invoking it.
Signed-off-by: Martin Jäger <martin@libre.solar>
`bt_mesh_default_key` is declared as const and thus located in flash.
`bt_mesh_cdb_subnet_key_export` tries to copy to that address which
results in a Bus Fault.
Use separate array for storing net_key.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
A CoAP client can re-issue an observe request (same endpoint and token)
to refresh it's subscription. No new observer should be registered in
this case.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add a function to the public CoAP API to find and return the unique
observer based on the address and token.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
A recent iface lock removal in ed17320c3d
exposed issues with concurrent access on TX to drivers that are not
re-entrant.
Reverting that commit does not really solve the problem, as it would
still exist if multiple Traffic Class queues are in use.
Therefore, introduce a separate mutex for TX data path, protecting the
L2/driver from concurrent transfers from several threads.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds datetime set and get functions which allow for setting and
getting the current time to/from the rtc alias device
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Core objects version reporting was broken for LwM2M version 1.1, as the
default object version not necessarily matches the LwM2M version.
Therefore, implement a table with default object versions for particular
LwM2M version, which can be looked up when determining whether it's
needed to include object version or not during Registration/Discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the conn security elevation is already in progress, retry the ATT
request if failed due to security reasons.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Queue characters in TX ring buffer regardless of interface state. This
allows simple applications that print basic output to CDC ACM port to
not care about connection or DTR state. Note that depending on actual
application requirements it might be still wise to wait for DTR before
trying to send data.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Prevent ECHO on Linux by arming IN endpoint with ZLP when interface is
configured and making sure that actual payload is only sent after
initialization timeout. The ZLP is not visible to host side applications
because the applications are really accessing tty buffer and received
ZLP does not modify tty buffer in any way.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add set functions for codec capability, to set all
assigned number values in the bt_audio_codec_cap
struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a new function, ltv_set_val, that did most of the
data manipulation from codec_cfg_set_val, so that we can
reuse that code for the codec cap and codec meta
functions as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Sort the Kconfig and CMakeLists include blocks again, and mark the start
and end of the blocks so that the CI can keep them sorted.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In the PTS BASS/SR/CP/BV-19-C test case a client executes Set
Broadcast Code operation of Broadcast Audio Scan Control Point
characteristic with Broadcast_Code set to an invalid value.
After syncing to an ISO stream there is an expected failed attempt
to decrypt the stream data, but the host does not set BIG_Encryption
value to the expected value 0x03 (BT_BAP_BIG_ENC_STATE_BAD_CODE).
Add missing BIG_Encryption state into the failing check.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Try to use llext_peek() for section pointers. If it's supported and
succeeds we don't need to allocate buffers.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The only way so far to access extension images is via a memory
buffer. Since this, supposedly, will also be a rather common method,
it makes sense to add a method to access extension data quickly by
obtaining a pointer instead of copying data into local buffers. Add a
llext_peek() method for that.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
elf_rela_t contains elf_rel_t exactly and contains an additional
field at the end. Therefore pointers of that type can be used for
both types, making the code generic.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The module linking API can be used for shared objects with no
architecture-specific relocation code. Add a weak function for such
cases.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
ret in llext_load() is always assigned before use, remove its
redundant initialisation.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
From BASS spec:
If the PA_Sync parameter value written by the client is set to a value
of 0x00 (Do not synchronize to PA) and the server is synchronized to
the PA, the server shall stop synchronization with the PA and shall
write a value of 0x00 (Not synchronized to PA) to the PA_Sync_State
field of the Broadcast Receive State characteristic .
Fixes BASS/SR/CP/BV-12-C test case.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
This commit adds the option to register an event handler to CoAP
resources when observers are added/removed.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The main action in this function it queueing the packet for
transmission which doesn't need a lock and interface flags use atomic
operations.
So, remove the unnecessary lock.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Allow magic number to be longer than the sizeof(magic).
This will allow to support future versions of the icmsg
with backwards compatibility.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
Replace spsc_pbuf with pbuf implementation dedicated to
be used by IcMsg based backends.
The pbuf is written on top of simple read/write semantics
with minimal footprint and code complexity
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
This adds implementation of secure packed buffer.
Secure packed buffer is added with intention to be used
in icmsg backed backends.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
Remove nocopy feature from icmsg_me backend.
The backend is not meant to be used to send big
data chunks thus no-copy feature is removed.
If one wants to use no-copy it is recommended
to use icmsg_me only for control messages while
allocator will shall be written seperately.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
In CoAP blockwise the client is supposed to
respond with 2.31 Continue code on Ack. This was recently
broken when Block1 parsing was moved after the initialization
of reponse packet. We need separate CoAP API to modify the code
of existing CoAP packet.
Also Ack packet should contain the Block1 options, even the
last one.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If the total length of the opcode and parameter values of Broadcast
Receive State characteristic operation is incorrect, the server shall
respond with an ATT Error Response and the Error Code set to Write
Request Rejected (0xfc), instead of 0x0d
(BT_ATT_ERR_INVALID_ATTRIBUTE_LEN).
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
PR allows to get rid of tinycrypt objects from
the final binary of the ble mesh apps based on
PSA TFM crypto.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Instead of consistently checking for both, IPv4 and IPv6 fragmentation
in several places, add a hidden Kconfig symbol which indicates that some
IP fragmentation has been enabled (either IPv4 or IPv6 or both).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The current logic to determine whether a packet is IP reassembled is
flawed, as it only worked in certain conditions (which was ok, as the
conditions were satisfied for the current use case, but now it's a
public function). Therefore, add an explicit flag that indicates whether
a packet is IP reassembled or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case of reassembled IP packets, we cannot rely on checksum
offloading as the drivers/HW has no means to verify L4 checksum before
the fragment is reassembled. Therefore, for such packets, verify L4
checksum in the software unconditionally.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move the existing code verifying that the net_pkt was reassembled at IP
level to a helper function, as it will be needed in other places as
well. Additionally, add packet family check before accessing union
fields.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPv4/6 fragmentation did not set the net_context pointer on the fragment
packet and in result the send callback registered on net_context was not
called. Therefore, copy the net_context pointer from the original packet
to the final fragment to ensure that the registered callback is called.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Skipping both next_hdr_off and last_hdr_off and filling last_hdr
variable doesn't make much sense, as this effectively moves the packet
cursor inside/behind the last (L4) header with no particular meaning.
Plus the last_hdr variable isn't really used anywhere, which kind of
proves the point. Therefore, remove the unused variable and needless
net_pkt operations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case the stack has to fragment the IPv6 packet, calculate the
checksum before fragmentation (if haven't done so).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case the stack has to fragment the IPv4 packet, calculate the
checksum before fragmentation (if haven't done so).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modify internal L4 protocols APIs, to allow to enforce checksum
calculation, regardless of the checksum HW offloading capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new net_pkt checksum, which indicate checksum status on the packet
(i. e. whether it has already been calculated or not).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This change fixes uninitialized RPA values for advertising sets of
non-default Bluetooth identities. The regression has been introduced
in the following commit:
8d6b206064
The follow-up fix for the default Bluetooth identity has been
introduced in a separate commit:
88c20b9cdd
Non-default Bluetooth identities can be loaded from the Settings
subsystem. In this case, RPAs of related advertising sets to these
identities are left uninitialized as the bt_id_create() function
context is not executed. As a result, the RPA is not created for
advertising sets of non-default Bluetooth identities, and the
advertising is started with the 00:00:00:00:00:00 address.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
On-Demand proxy client API has been changed but
usage of this API in shell test was missed.
Commit fixes this API usage.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The ability to send the solicitation PDU doesn't
depend on GATT Client role.
Commit makes independent one functionality from
another.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Remove unnecessary newline characters from shell_print, it already adds
them. Align the table pipe characters better in the list of modules.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The memory usage shown in the shell was 0 which is obviously incorrect.
At some point the memory allocation tracking was dropped from llext.c
mistakenly. Add it back.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Rename local usbd copy from nrfx_usbd to nrf_usbd_common and use it in
both USB stacks. Renaming header to nrf_usbd_common.h allows breaking
changes in exposed interface. Mark all doxygen comments as internal
because local usbd copy should not be treated as public interface
because we are under refactoring process that aims to arrive at native
driver and therefore drop nrf_usbd_common in the future.
Use Zephyr constructs directly instead of nrfx glue macros.
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This new API returns the version string corresponding to a given
HCI version.
The API can be used by applications to print out human-readable
information about the controller being used.
Adding this API removes possible code duplication.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix tcp.c compilation if user unsets
CONFIG_NET_TCP_CONGESTION_AVOIDANCE config option.
Fixes#64824
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The enum is mainly to print output of band, so, the default value is 0
which means 2.4GHz, which is not correct when using it to configure like
in connect.
Fix the default value to unknown i.e., no user preference. This way we
can use same enum for both set and get.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Implement testcases for Information Reporting Interface [300-399]:
* LightweightM2M-1.1-int-301 - Observation and Notification of parameter
values
* LightweightM2M-1.1-int-302 - Cancel Observations using Reset
* LightweightM2M-1.1-int-304 - Observe-Composite Operation
* LightweightM2M-1.1-int-306 – Send Operation
* LightweightM2M-1.1-int-307 – Muting Send
* LightweightM2M-1.1-int-308 - Observe-Composite and Creating
Object Instance
* LightweightM2M-1.1-int-309 - Observe-Composite and Deleting
Object Instance
* LightweightM2M-1.1-int-310 - Observe-Composite and modification of
parameter values
* LightweightM2M-1.1-int-311 - Send command
303 and 305 cannot be implemented using Leshan as it only support
passive cancelling of observation.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If the interface is WiFi one, then print information about it.
Also the device information is useful to know so print device
name corresponding to the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit names a couple of choices to allow the default
value to be overridden by Kconfig files out of tree
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
If the server has synchronized to the PA and detected that the BIS is
encrypted, the server writes a value of 0x01 (Broadcast_Code
required) to the BIG_Encryption field of the Broadcast Receive State
characteristic to request a client to provide a Broadcast_Code.
In PTS BASS/SR/CP/BV-14-C test case the PTS (client) expects that the
new value of the Broadcast Receive State characteristicstate will be
notified, so the PTS could sent Set Broadcast_Code operation to the
server.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Fixes failing EBQ test LL/DDI/SCN/BV-88-C Extended Scanning,
Active, Properly Ignore RFU Fields
Several minor modifications made to le_ext_adv_report() to
properly ignore any invalid fields present in the received PDUs
Signed-off-by: Troels Nilsson <trnn@demant.com>
There was a conditional compile misssing for the
BT_PER_ADV_SYNC_TRANSFER_SENDER, potentially leading
to build failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Many functions return non-zero return codes on errors. I added an assert
for the case, when a function is expected to fail. It is just a
shorthand for `zassert_not_equal(0, ret);`, analogous to
`zassert_ok`, introduced in c5d85e175f.
I also added the corresponding `zassume_nok` and `zexpect_nok`.
Signed-off-by: Greter Raffael <rgreter@baumer.com>
It declares a variable inside a switch statement without brackets to
properly delimit the scope, making clang barf. This patch adds them.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding support for echo option if telnet commands are supported. This is
useful when the telnet client is in character mode. It allows to use the
arrow keys, ctrl-c and more. Something to keep in mind is that when
character mode is turned on by the client, network traffic is
considerably increased as each typed character is sent over the wire.
Note: echo mode is only supported if SHELL_TELNET_SUPPORT_COMMAND is
enabled.
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
Do not include the resource type (rt=) in the registration message when
using the OMA JSON format. This was a workaround specifically for the
Wakaama LwM2M server which is no longer needed since the latest master
branch.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Portfolio object created string buffers for Identity resources
that was overlapping on some cases.
Don't calculate pointers by hand, allow compiler to calculate it.
Fixes#64634
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Extend the previous support of creating object instances by allowing
creation of resource instances as well.
Similarly, add support for deleting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The existing driver and sample:
- drivers/bluetooth/hci/rpmsg
- samples/bluetooth/hci_rpmsg
are no longer correctly named, since they now use the IPC subsystem to
send and receive data. The IPC subsystem can use RPMsg as a transport,
but that is one of several selectable backends.
I initially wanted to deprecated both the BT_RPMSG Kconfig option as
well as the zephyr,bt-hci-rpmsg-ipc chosen node in Devicetree. However,
this proved to be undoable in the case of the Kconfig option. This is
because it's a choice option, and those have special behavior. In
particular, the only practical way to deprecate would've been to keep
the old Kconfig option outside the choice (much like it's done in this
commit) but then also add a 'depends on !BT_RPMSG' on each of the
remaining choice symbols *except* on the new BT_HCI_IPC one. This, however,
only works correctly for .conf files. If a board instead sets the
default BT_HCI_BUS_TYPE in the Kconfig.defconfig file then the Kconfig
tree parsing would fail, because it'd try to set it to a value
(BT_RPMSG) that is no longer part of the choice.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The mcumgr SMP UDP configs struct was causing a unique tag name
violation (rule 5.7).
The struct name has been changed from configs to smp_udp_configs.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
mcumgr's SMP UDP transport was unnecessarily using a potentially large
amount of ROM space due to static initialising fields in a
config struct that also contains buffers/stacks.
This has been changed to instead initialise fields in the start
function, reducing ROM usage by ~5K in the default configuration
with IPv4 and IPv6 enabled.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When logging strings are stripped from the binary prevent
performing check of pointers which requires access to the
string.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
radio_pkt_big_ctrl_get() returns a statically allocated
buffer of type pdu_big_ctrl, but the callers expect a
buffer where a whole PDU for a BIG control packet can fit
(not just space for the payload),
and use it as such, overflowing this statically
allocated buffer, and smashing other variables after.
Let's fix it by allocating a buffer of the correct size
to fit a BIG control PDU.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/64497
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With very fast HCI interfaces (for ex. in the simulated nrf5340)
the tx_rate calculation can do a division by 0
(if to packets are enqueued in the same 32KHz clock period).
Let's avoid it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add the len_max rx structure member to indicate maximum number of bytes
possible to receive. It is needed to send information about our protocol
parameters to host.
Also, limit the maximum size of request/responses for backends that uses
buffers provided by the handler.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
When UART dictionary frontend is used strings can be removed
from the binary.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add option to remove string literals which are constant and
never touched by the firmware. It can save significant amount
of RO memory.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Enabling the core dump via memory window backend only makes sense on
Intel ADSP platform wtih memory windows enabled.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The DEBUG_COREDUMP_BACKEND_LOGGING option should automatically
select LOG Kconfig instead of just depending on it.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When no parameters are given to the 'bt' command it prints
the help message. The 'iso' command responds with 'missing
subcommand'. This commit updates the behaviour of the iso
command so that it behaves the same as the bt command, i.e.
prints a help message
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
If user adds IPv6 address to the network interface, check
if the address is a multicast one and add it to multicast
group if it is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user adds IPv4 address to the network interface, check
if the address is a multicast one and add it to multicast
group if it is.
Fixes#64389
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Default behaviour should only bind to port independent of IP, this
allows even multicast/broadcast L4 traffic to be received.
User can always specify a specific address to bind using shell or
Kconfig or API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Using a generic IP for address set failures is confusing, esp. two same
prints (one for v4 and the other for v6), so, use explicit version.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This has several advantages:
1. we don't need any hard assumptions about symbol length. The
current hard-coded limit of 32 characters might well be not true.
2. replaces a lot of code for reading those names with a single
call to a 1-line function to calculate string location.
3. eliminates the need to allocate buffers for exported symbol names
by replacing them with a simple pointer assignment.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Instead of first allocating all sections and then copying then,
create a helper function to allocate and copy a single section and
call it for all appropriate sections. We need to call this function
from another location when copying string sections.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Some compilers (e.g. riscv32) does not handle well complex macros
for logging. Generated code is bigger than expected (e.g. riscv32
code is almost twice bigger than cortex-m code). Use of logging can
lead to unexpected code increase.
To handle that an analysis of the zephyr code base was performed and
it shown that 75-80% of logs are simple strings with 0 arguments
(~45%), one 32 bit argument (~26%) or two 32 bit arguments (~6%).
Given that a set of dedicated macro were created which are applied
to those 3 cases which on 32 bit platform create very simple log
messages without padding or alignment needed.
Such dedicated macros save up to 40% of code (riscv32) and also
executes 30% faster (arm cortex and riscv32).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Extend frontend API with optional set of functions which can
be used when simplified log message handling is enabled. If this
mode is enabled then there are dedicated macros for processing the
most common messages (string + 0-2 word arguments). Using this API
can speed up the processing of messages that are the most common.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In preparation for new feature which optimizes handling of
the most common log messages (0-2 32 bit word arguments) add
functions dedicated for that purpose.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The loop in `coredump_flash_backend_buffer_output` might fail without
any alerts. This could be due to e.g. a too small coredump-partion.
Add a LOG_ERR if an error occurs.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
ZLP packet has to be read and acknowledged by host just like any other
DATA packet. Do not end transfer until the host actually acknowledged
the trailing ZLP. This fixes the race condition between host and Zephyr
application where the next transfer could be lost if host did not issue
IN token (that would read read ZLP) before the application tried to
start new transfer.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
If CONFIG_BT_ISO_TEST_PARAMS=y then the CIG and BIG
create params was not properly initialized.
Modified the TX for BIS and CIS to be more similar
Added a timeout on the buffer to avoid any potentional
deadlocks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moving the Zephyr specific config options from
modules/hostap/Kconfig to corresponding Kconfig where the
option is specified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When no heap has been configured, osMessageQueueNew() will no
longer include a call to k_calloc() (which needs the heap).
In such a configuration, if osMessageQueueNew() indicates that
the buffer must be allocated, it will fail and return NULL.
Fixes#61196
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
CoAP reply structure user_data should be kept between
ongoing blocks, so that callbacks for LwM2M send continue
to work on blockwise transfers.
Fixes#64290
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Ensures correct packing of net idx in Heartbeat Publication Status
messages on the Configuration Server.
Reference to net idx packing format: MshPRTv1.1 section 4.3.1.1
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Fixes incorrect unpacking of Heartbeat Publication status
messages on the Configuration client.
Reference to packing format: MshPRTv1.1 section 4.3.2.63
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Fixes issue where Heartbeat Publication Status message sends
garbage data when destination field is set to the unassigned address.
MshPRTv1.1, section 4.4.1.2.15:
"When the Destination field is set to the unassigned address, the values
of the CountLog, PeriodLog, TTL, and Features fields shall be set to
0x00 and NetKeyIndex field shall be set to 0x0000."
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Updates Bluetooth mesh specification references:
- Change "Profile" to "Protocol" since the main specification has
changed its name.
- Update/align formating of specification references. This will
make it easier to find spec references in the future.
- Change some section references to point to the correct section of the
newest version of the specification (v1.1).
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The shell name defined with `SHELL_DEFINE` is implicitly
guaranteed to be unique while it is possible that more than one
shell backends can have the same prompt.
Print the name of the shell backend alongside with its prompt
to differentiate between the backends.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Added some new APIs to get the backend instances more easily,
so that dev does not need to rely on `shell_backend_*_get_ptr`,
which looks more like a hack to access a local variable.
These APIs are basically copied from the log backend
implementation.
Added testcase for the APIs.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Rename the shell backend `thread_name` variable to just `name`,
to be used for other things not specific to thread later.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
When there is no buffer for gcov hex data,
dump them directly to console.
This saves RAM which can be used to hold more gcov data.
Reduce number of gcov hex data send by console -
do not send space between every two digits.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
This commit reuses the string "Unknown %s frame type" for two
log messages, as suggested by ycsin.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit resets the state of the CMUX receive state
machine when the CMUX instance is attached to a pipe.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds logging for CMUX frames and commands and
their data, for both transmit and receive. It also removes
the superseded LOG_DBG() lines like "Received frame".
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit resets the receive ring buffer for each DLCI
pipe when they are opened. They may have old data stored
from last time they where opened.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds a check to the async connect and disconnect
functions to validate the CMUX is not already connected
or disconnected respectively. This was already part of the
sync connect and disconnect functions, so the sync functions
now simply wrap the async functions to avoid duplicate code.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Fix missing Extended Advertising terminate event and
advertising scheduling not being stopped.
Under race conditions, auxiliary event is aborted without
the generation of done extra event which is suppose to
stop the scheduling when max events count is used.
The fix now generates the done extra event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix periodic advertising sync window calculation to include
the scheduling resolution margin, i.e. be double as with
the event jitter value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The new "net sockets" command will utilize the object core
support to track and show information about BSD sockets that
are created in the system. This command is able to show info
for all network sockets (native, offloaded etc) in the system.
Example of the output of the new command:
uart:~$ net sockets
Creator Name Flags FD Lifetime (ms) Sent Received
main af_inet46 6ST 0 3260 819 498
main af_inet46 4ST 1 2110 469 142
main af_inet46 6DU 2 2110 9941 9941
main af_inet46 4DU 3 2110 1375 621
4 active sockets found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The writefds is typically set if there is an error while
waiting for example the connect() to finish. So check if
the user supplied the writefds and update it accordingly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we try to connect to a port which no socket is listening to,
we will get a packet with "ACK | RST" flags set. In this case
the errno should be ECONNREFUSED instead of ETIMEDOUT like we
used to return earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Increase reference count already when initial SYN is sent.
This way the tcp pointer in net_context is fully valid for
the duration of the connection.
Fixes#63952
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to conditions in the DFU spec section 6.1.3.7 (Sending a
Firmware Update Status message) and in 'Idempotency' part of section
6.1.3.4 (Receiving a Firmware Update Start message), the FU Server
should not update internal state when 'Wrong Phase' error condition
is triggered.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
In case ping is sent to own address, the request is looped back to the
stack and served before ping work had a chance to reschedule. In result,
when the final ping reply has been server, and ping operation finalized
with `ping_done()`, the work was rescheduled one last time, causing the
ping timeout to be reported. Fix this by rescheduling the work before
sending the actual request, so that the reply handler can cancel the
work properly in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case packet is looped back to the stack, set LL address information
on the packet, using the LL address set on the corresponding network
interface, so that the information can be interpreted by the SOCK_DGRAM
packet socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we run network tests under tests/net, then set the
Dummy network interface as a default one so that it will
be picked up first.
This should solve the issue if the DUT is having a real
network interfaces like onboard Ethernet interface which
could cause the test to fail. The test might fail in this
case because the network tests assume that only simulated
network interfaces are used by the tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Compiler can't tell that k_thread_abort() won't return and issues a
warning unless we tell it that control never gets this far.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The remote address of the connection is checked whether
it is v4-mapping-to-v6 address in which case we should
print it such.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When a new incoming connection is accepted, do not overwrite
the listening remote address. The remote address for the
listening socket is the any address (like :: for IPv6)
and not the accepted socket remote address.
This only affects the "net conn" shell command which prints
the remote address incorrectly. There is no problem accepting
new connections in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We should use the NET_CONN_RANK() macro when printing the
current rank value as that macro masks the rank values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The socket address passed in accept() call should point
to the new connection address and not the old one.
Fortunately this only affects things after the v4-mapping-to-v6
support so older code than this works fine.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The address length of the accepted socket must reflect the
size of the address struct, so it should either be
sizeof(struct sockaddr_in) for IPv4 or sizeof(struct sockaddr_in6) for
IPv6 socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This allows IPv4 and IPv6 share the same port space.
User can still control the behavior of the v4-mapping-to-v6
by using the IPV6_V6ONLY socket option at runtime.
Currently the IPv4 mapping to IPv6 is turned off by
default, and also the IPV6_V6ONLY is true by default which
means that IPv4 and IPv6 do not share the port space.
Only way to use v4-mapping-to-v6 is to enable the Kconfig
option and turn off the v6only socket option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for IPv4 mapped IPv6 addresses when converting
IP address to a string in inet_ntop() function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix two issues with net tcp command:
* The `net tcp` commands are still based on net_context API. For TCP,
the API caller (net shell) should add one extra reference to the
allocated net context, to prevent premature context release in case of
connection teardown. Currently that was not the case, and the context
was released too early, resulting in missing final ACK from the Zephyr
side on connection close.
* The net context API should not be called from the registered connect
callback, as this creates a temporary deadlock situation. The
net_context_connect() function blocks until the connection is
established, or an error or timeout occurs. For that time the
net_context mutex is being locked. In case of connection error (for
example after receiving RST packet) the connect callback is called,
indicating an error. If we try to call net_context API from within, a
deadlock situation takes place, as the context mutex is still locked
by the net_context_connect() (called from the shell thread). This
blocks the further execution of the TCP stack and can result in an
unexpected behavior (like for example retransmitting the SYN packet,
which takes place from yet another thread, TCP work queue).
Fix this, by releasing the net context not from the callback directly,
but based on the return value from net_context_connect().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use IN_RANGE instead of explicitly checking that a value is
in between two other values
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The BT Core Spec v5.4 allows separate SDU_Interval to
be set on C_To_P and P_To_C directions,
but this is not possible with the existing interface.
This PR splits the interval parameter in the call to
bt_iso_sig_create into one for C_To_P
and one for P_To_C
It also splits the latency parameter into one for
C_To_P and one for P_To_C
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Bluetooth: ISO: update UI for extended API
The API for setting the SDU interval and latency have been updated.
This PR also updates the setting of these by the user in the shell
and the iso_connected_benchmark sample
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Since CRC32 hash/checksum support is enabled by default, make it
select the CRC Kconfig symbol
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Only SMP over console transports need CRC support, therefore do
not imply CRC support for MCUmgr entirely because only 2 optional
transports require it
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
SMP over console uses a checksum, therefore it is required in order
to enable these transports
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
According to the UART API documentation, implementation must block when
the transceiver is full. For CDC ACM UART, TX ringbuffer can be
considered as transceiver buffer/FIFO. Blocking when the USB subsystem
is not ready is considered highly undesirable behavior. Blocking may
also be undesirable when CDC ACM UART is used as a logging backend.
Change the behavior of CDC ACM poll out to:
- Block if the TX ring buffer is full, hw_flow_control property is
enabled, and called from a non-ISR context.
- Do not block if the USB subsystem is not ready, poll out
implementation is called from an ISR context, or hw_flow_control
property is disabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When a usb_transfer is cancelled, the callback is finally invoked.
Silly, there is no transfer status passed, and in the callback we can
only check the size and device status.
Reported-by: Alex Kaiser
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The warning which became error looks like this
error: type qualifiers ignored on function return type
[-Werror=ignored-qualifiers]
219 | const char * const wifi_ps_txt(enum wifi_ps ps_name);
It is pointless to add a const qualifier to a return value.
So remove the const pointer to avoid this warning.
Fixes#64197
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fixes an issue whereby the erase function would return an unknown
error, which would happen when the slot was already erased.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When EATT is established, the value returned from `bt_att_get_mtu` is
not useful to determine the ATT_MTU that applies to a ATT response. This
is because `bt_att_get_mtu` may return the value for a different bearer
than the request is serviced on.
To fix this, the params struct for the GATT read operation is given a
new field that will record the ATT_MTU that applies to this ATT
operation. This value is then used to determine if the GATT long read
operation is concluded.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/61741
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The interface number is generated automatically if one
presses <tab> when expecting the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow multiple commands use the same dynamic shell command
completion when expecting network interface index.
For example "net iface" and "net stats" are such commands.
The network interface expansion cannot be used in "net ipv6 add",
"net ipv4 add" and "net route" commands as they require more
data after the network interface index argument.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "net stacks" has been obsolete for a long time already
so remove it for good. It is replaced by "kernel stacks" cmd.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is a preparation for the refactoring. The old "net" command
is renamed "net_old" so that the individual commands can be
placed into a separate .c files.
This is done like this because we need to use the
SHELL_SUBCMD_SET_CREATE() to create the sub-command and then
use the SHELL_SUBCMD_ADD() in the .c files to add the command
into the sub-command and not get conflict with the same name
sub-command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is preparation commit that moves the net shell code to
subsys/net/lib/shell directory. The following commits will
then refactor the code in net_shell.c to smaller and more
manageable pieces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
To enable runninng and testing this backend on the POSIX
architecture, we need to allow defining the shared memory
buffer as a compiler provided symbol, instead of a hard
address provided by the DTS.
For this case we refer to a symbol a POSIX arch implementation
(typically the board) needs to provide.
It is the responsability of that implementation to ensure
that symbol exists and points to a memory buffer of the
DT defined size.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add sleep prevention in crucial USB-C stack functions to make
state transitions faster and to send responses faster.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Add internal function that prevents one sleep of the USB-C stack.
It can allow to have longer sleep times to conserve more power, while
still having possibility to respond in the required time and
set specific registers.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
HAS_DTS has become a redundant option. All Zephyr architectures now
select this option, meaning devicetree has become a de-facto
requirement. In fact, if any board does not provide a devicetree
source, the build system uses an empty stub, meaning the devicetree
machinery always runs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
In llext_copy_symbols the check after llext_read
was looking the result of llext_seek operation instead
of the read.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Do not use timeout for UART callback. The UART IRQ bases on the IDLE
line, so waiting for additional bytes is not necessary and it introduce
additional latency.
Another issue with the timeout is that the UART drivers use sysworkq for
implementing timeout. The sysworkq thread may have lower prio than the
host command thread, which may cause a delay in calling the UART
callback, which gives the semaphore to the HC handler.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The `BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS` is not expected to generate a
response from the controller, but from the spec:
Normally, no event is generated after the
HCI_Host_Number_Of_Completed_Packets command has completed. However, if
the HCI_Host_Number_Of_Completed_Packets command contains one or more
invalid parameters, the Controller shall return an HCI_Command_Complete
event with a failure status indicating the Invalid HCI Command
Parameters error code.
In practice, this can also be generated if flow control is inadvertedly
turned off during operation. Running `hci_cmd_done` is not correct when
the event happens (as there is no corresponding command buffer), and
`ncmd` should not be returned as this command ignores the semaphore when
sending.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Refactors the implementation of the Opcode Aggregator
models to allow them to coexist on the same device.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Instead of strlen() use sizeof() in FL() macro. This way
all the checks are done at compile time instead of runtime.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adds a goto statement to ensure that model extensions are registered
in Composition Data Page 1 if it is enabled.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
This fixes an issue where the DFU client could get stuck trying to
transmit a message to servers if the DFU client was misconfigured, for
instance missing application key or network key.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
If instantiated models don't have any relations at all, then the
extensions list will be empty. We should allow to disable it at all
to not waste RAM.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add Kconfig option to control TCP RST behavior on connection attempts on
unbound ports. If enabled, TCP stack will reply with RST packet (enabled
by default).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Send RST as a reply for unexpected TCP packets in the following
scenarios:
1) Unexpected ACK value received during handshake (connection still open
on the peer side),
2) Unexpected data packet on a listening port (accepted connection
closed),
3) SYN received on a closed port.
This allows the other end to detect that the connection is no longer
valid (for example due to reboot) and release the resources.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a helper function which allows to send a RST packet in response to
an unexpected TCP packet, w/o associated connection or net context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As composite operations don't have path in CoAP packet,
it wrongly triggered a check for security object and got
denied the access.
Fixes#64012
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When objects are initialized, empty strings should be set to length of
zero, instead of length of the full buffer.
So use INIT_OBJ_RES_DATA_LEN() to give both, the buffer size and data
length.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When resource instances are initialized, we must calculate
beginning of the data buffer using the index and maximum
data length. Otherwise buffers would overlap with previous.
Fixes#64011
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
As the lwm2m_registry.c and specificly lwm2m_set()
functions already ensure null-terminator on string and
count that into string lenght, the content type handlers
should do the same.
When string is written, strlen()+1 is the data length.
When string is read, use the data length, so we don't
leak uninitialized strings. If buffer overrun have
removed the null-terminator the strlen() migh be larger
than data_len.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If a receive state is removed, then the bis_syn_req callback
will be called with 0x00000000, to indicate to the application
that the sink should be desynced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The flag was not properly set when the broadcast sink
did not add the source (e.g. if a broadcast assistant
added it).
This also downgrades two LOG_WRN to LOG_DBG as they may
happen without indicating an issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Resend the request with Echo option and the received Echo
option value when receiving a 4.01 (Unauthorized) response
with the Echo option.
Add missing header file kernel.h to coap_client.h.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
When the BLOB server is in Pull mode and all chunks were received for
the current block, and the current block is the last block, then
according to section 5.2.4 of MshMBTv1.0 the server should stop sending
BLOB Partial Block Report messages if it determines that the client
knows that the transfer is complete:
```
While the Pull BLOB State Machine is in the All Chunks Received state,
the Pull BLOB State Machine continues to send the BLOB Partial Block
Report messages until one of the following happens:
• The Receive BLOB Timeout timer expires.
• If the current block is not the last block, then the client starts a
new block, in which case a new Pull BLOB State Machine is instantiated.
• If the current block is the last block, then the server determines
that the client knows the transfer is complete. For example, a
higher-layer model may indicate that the client considers the transfer
complete.
```
We currently don't have any OOB mean (for example, API) to determine
whether the client knows that the transfer is complete. We also need to
keep in mind that the Partial Block Report message can get lost so one
transmission may not be enough. The client could immediately send BLOB
Transfer Get message to get the transfer status, but this goes against
its state machine defined in section 6.2.4.2, where a Block transmission
completes when a BLOB Partial Block Report message is received with an
empty list of requested chunks (table 6.4, figure 6.1).
Because of this, we need to keep sending Partial Block Report messages.
We can keep sending them at least until Block Report timer expires.
If the client sends BLOB Transfer Get message, then it finished with
sending the block and we can change the phase and finish the transfer.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
"const k_tid_t" is "struct k_thread * const" and not
"const struct k_thread *" as the code may be assuming. Just
drop it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The stack size was previously hardcoded in the source code, making it
difficult to change when enabling options that require a larger stack.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
According to IEEE Std 802.1AS-2011 11.3.3, gPTP messages are not
VLAN-tagged.
Remove the use of VLAN headers for gPTP messages on the TX path.
The RX path is handled by the drivers. The network drivers in Zephyr
might need to be updated as well in order to accept receiving
non-VLAN-tagged gPTP messages when the CONFIG_NET_VLAN option is
selected.
Continue sending gPTP packets with VLAN tags when CONFIG_NET_GPTP_VLAN
is enabled. Specify that this option is for testing purposes.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The previous implementation was setting priority 3 (Critical
applications) for Sync, Pdelay and Pdelay_Resp messages; and priority 6
(Internetwork control) for the other PTP messages. This might have been
done under the incorrect understanding that "Critical applications" was
the highest priority.
This resulted in the Pdelay_Resp_Follow_Up getting sent before the
Pdelay_Resp message when enough TC_TX queues were being used
(NET_TC_TX_COUNT >= 2), which is an inversion compared to the intended
order.
Invert the priority of the outgoing PTP packets so that the PTP event
messages are sent with higher priority, as was originally intended.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The priority 3 (Critical applications) was incorrectly marked as
"highest priority", which might have led to incorrect use of
NET_PRIORITY_CA in some cases.
Note that this is already correctly advertized in other places, as it
was partially fixed in af8a0b1a5d.
NET_TC_SKIP_FOR_HIGH_PRIO was previously only allowing to push priority
3 (Critical applications) packets directly to the driver, but not the
ones with a higher priority. Change it so that it is now in effect for
priority 3 and above.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Links host to mbedTLS library if Bluetooth Mesh is enabled, and
CONFIG_BT_TESTING=y.
Bluetooth Mesh has test dependencies in the host.
In order to compile Bsim tests with these test features
and PSA enabled, the libraries must be linked.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Since the BIS indexes start at 0x01, then BIT(0) is a
invalid BIS sync value and shall not be sent by the
broadcast assistant.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the initiator provides CCID in the metadata, we verify
that the CCIDs exist on the device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix bitfield crossing byte boundary - replaced with macros for
setting/getting the values
Fix missing endianness conversion for evt_cntr
Changed aa from uint32_t to uint8_t[4] to align with the rest of
the code and avoid any potential endianness issues
Signed-off-by: Troels Nilsson <trnn@demant.com>
For the CAP acceptor the size and rank characteristic shall
be set as per the CAP spec. Add checks for 0, as 0 indicates
not initializing the characteristics in the CSIS instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds parsing of Private Network Identity parsing in the proxy client,
allowing the client to use these messages to establish a GATT
connection.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
BT_CTLR_ISOAL_LOG_DBG_VERBOSE, BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN, and
BT_CTLR_CONN_ISO_AVOID_SEGMENTATION are very tied to the BT_LL_SW_SPLIT
implementation. It is very unlikely that these will ever be used by
another controller
Therefore move them out to the BT_LL_SW_SPLIT specific configuration
file. This will likely create less confusion when using another
controller.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Update the BSIM test and the shell to use
bt_audio_codec_cfg_set_chan_allocation rather than implementing
their own versions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add new configuration value CONFIG_LWM2M_UPDATE_PERIOD
that allows calculating update period from last update,
instead of calculating it from the lifetime.
In runtime, server is allowed to change the lifetime of the
registration which causes update perdiod to be effected.
When fixed update period is preferred, UPDATE_PERIOD
config is then used.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This commit adds checks for results and in case of error, handles it.
The failed initialization of the TCPC can postpone initialization in
case the TCPC needs more time after powering up. Otherwise if other
error happened, the Type-C Layer will be disabled.
Errors in other places of the USB-C stack, like communication errors,
moves the state machine to the error recovery, restarting the
communication with parner.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
These two functions are used together so there is no need for
splitting them into two functions. This commit also makes this
function required to be implemented by the TCPC driver.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
This commit adds check in cc_open entry state and logs if setting
either of the values were unsuccessful.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
When the get_cc function returns error, the CC lines should be
considered as open. It may happen either due to some chip malfunction
or chip going into sleep mode and needing time to reinitialize.
TCPC should only go to sleep if there is no partner attaches, so
in case of this error, the lines should be considered as disconnected.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
If TCPC supports checking for pending messages, it should be done
instead of forcefully trying to read the message and getting no-data
result. This helps with powereficiency for chips that go to sleep
when there is no message pending. Trying to read the message can
wake up the chip providing higher power usage.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The TCPC driver initialization can be unsuccessful and it should be
checked and logged if that's the case.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
TCPC API functions should be able to inform the caller if the function
is supported and successfully executed. Bool values doesn't allow this
so it is needed to change the type to int.
For is_rx_pending_msg function the return code should conform to
existing error codes, so in case of function being not supported,
the -ENOSYS should be returned. In case of successful execution,
if there is no pending message, the -ENODATA should be returned and
in case of message pending, the value of 0.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The BAP unicast babblesim tests now does RX and TX
and verifies that the data is correctly received on both
the client and server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the codec_cfg_get_frame_duration function to return the
assigned numbers value, instead of a converted value, but with
support for converting the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since the default process dhkey gen in bt rx, will block send
Trans Ack, cause peer device send more package.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Since notice that simultaneous advertising is not only used
by relay message, provision over pb-adv can also be used.
so it was changed to a more general name.
refs:https://github.com/zephyrproject-rtos/zephyr/pull/48903
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This will truncate ATT notifications/indications if exceed ATT MTU size.
It is up to the client to exchange MTU.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes sending proper Preset List notifications after
reconnection. The issue was observed when the last preset
known to the client has been removed.
As we do not hold the information about the deleted presets,
we need to use Generic Update procedure to:
1. Notify the presets that have been removed in range
(PrevIndex = current_preset_last, Index=previous_preset_last)
2. Notify deletion of preset Index=previous_preset_last.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Some of the data shall be persistent across connections to bonded
clients. This includes notidication state flags that are used to
determine whether notify bonded client after reconnection.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This refactors the preset list to use sys_slist API. There have been
various issues seen while iterating presets, thus it's more save to use
well-defined and tested sys_slist API.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Defer sending the features, active index, preset list and preset read
response to sysworkq and retry sending in case failed due to buffers not
available at the moment.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Verify that a HAS Server IUT sends changed characteristic notifications
or indications when the Lower Tester reconnects.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This moves common code to set_preset_availability function to be called
from bt_has_preset_available and bt_has_preset_unavailable.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes missing setting of FLAG_CONTROL_POINT_NOTIFY flag that
indicate whether submit control_point_work. In case the there are more
indications/notifications to sent (is_last flag is unset), the
FLAG_CONTROL_POINT_NOTIFY shall be set to resubmit control_point_work.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes revering the features value back to previous state if work
submission failes. Even if it fails it indicates an internal sysworkq
issue, so even retry won't help. The client can read the features value
anyway, thus it's sane to just log an error in such case.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Rename the Kconfig option from BT_ISO_ADVANCED to
BT_ISO_TEST_PARAMS to more explicitly denote that it
enables support for using the ISO test parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Many releases ago, specifying to block indefinitely in the log
processing thread would do just that.
However, a subtle bug was introduced such that specifying -1
for `CONFIG_LOG_BLOCK_IN_THREAD_TIMEOUT_MS` would have the
exact opposite effect than what was intended.
As per Kconfig, a value of -1 should translate to a timeout of
`K_FOREVER`. However, conversion via `K_MSEC(-1)` results in
a `k_timeout_t` that is equal to `K_NO_WAIT` rather than the
intent which is `K_FOREVER`.
Add a dedicated check to to ensure that a value of -1 is
correctly interpreted as `K_FOREVER` in `log_core.c`.
For reference, the blocking feature was described in #15196,
added in #16194, and it would appear that the regression
happened in c5f2cdef09.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Improve it so that:
- it mentions the important fact that it redirects `printk` messages
to the logging subsystem
- it is consistent with the help messages of the other options in this
file (i.e. it starts with "If enabled")
Signed-off-by: Ladislav Podivin <ladislav.podivin@tietoevry.com>
When relocating section symbol addresses the value where the
relocation is to be written is an offset into the section to load.
Simply rewriting it with the section address is not enough, we need
to write the address of the section with the offset into it.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Added a condition to check if the size of the copied
memory is a positive number.
Fixes#58700Fixes#58703
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
Oneline fix to smp_bt.c smp transport register.
smp_client_transport_register() is a void function and
has no return value, so it should be ignored.
Signed-off-by: Alexander Stark <alexander.t.stark@gmail.com>
Add a build option to allow changing the initial state used
in the timer based random generator and by the kernel in the
early random number generator.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Check whether peer is subscribed for ASE state notification before
calling bt_gatt_notify. This handles an assert thrown when the
notification failed to be sent.
Fixes: #63728
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
If the PA gets terminated, we clear the pa_sync field of the
corresponding broadcast sink object.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For some reason the state_change variable was static, which
does not make any sense. Changed it to a regular local
bool in bt_bap_scan_delegator_mod_src.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit makes workable proxy solicitation functionality
only server part without dependencies on client part.
Only on demand proxy server is required.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The `upload_status_rsp_with_progress` function uses the currently set
slot pointer to set firmware id field in the message. If another
upload starts but the firmware is already received, the slot API won't
let us to set the fwid and will return an error code. In this case, the
slot pointer stays invalid as fwid wasn't set, and
`upload_status_rsp_with_progress` will not add fwid as the lenght is
zero.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Handles return values from settings handlers which were missing
and would return "Unknown error" to clients instead of the read
error
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes the error code being returned when trying to perform a
hash/checksum on an empty file to show it is because the file is
empty, not because a paramter (which was not provided) was too
large.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes an issue which would cause a fault if someone attempted
to write to the (non-writable) blinfo keys
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fix hung Controller when establishing CIS on an encrypted
ACL connection with Controller built with direction finding
support enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the bt_bap_broadcast_source_reconfig was supplied with a subset
of the streams, it would only update the codec cfg and qos for the
streams provided in the parameters.
This commit changes that, so all streams are properly updated,
as they share some common values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When calling bt_bap_broadcast_sink_delete, the broadcast sink
should not attempt to terminate the PA Sync. The PA sync can live
on without the broadcast sink, just as the broadcast sink can live
on without the PA sync (which is why the PA sync check was completely
removed).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When updating the Scan Delegator receive state, we shall only
set the BIS indexes in bis_sync that we are actually synced to.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit increases the buffer used for commands
in the control channel within an instance of the
modem_cmux module. The buffer was not large enough to
store an MSC command if the optional break signals
where included. This commit fixes the issue and
updates the test suite to use the max size MSC message.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
If the previous upload was in-band and it didn't complete, the slot will
stay reserved. By design we release slot not at the end of the upload
phase, but at the start of a new upload phase.
This fixes DFU/SR/FD/BV-13-C.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
If a Fw Distribution Client sends the Upload OOB Start message, but the
application layer didn't call bt_mesh_dfd_srv_oob_check_complete yet,
we have no other option other than ignore the message. The next phase
in this case could be Transfer Active, Transfer Success or Failed and it
will be set only after Check Firmware OOB procedure completes.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This message _at least_ 2 bytes long, but can be longer, thus
BT_MESH_LEN_MIN should be used.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
In OOB upload, when Check Firmware OOB procedure completes successfully
and the firmware is already received, we send Firmware Distribution
Upload Status message with update Phase set to Transfer Success. In this
case, we must set Upload Progress to 100%. This can't be done through
the callback as the application layer doesn't yet know that the firmware
is already received. This will happen by the exist from
bt_mesh_dfd_srv_oob_check_complete function, which will return error
code -EEXIST.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
According to the ASCS_v1.0 the ASE in Streaming state shall transit to
QoS Configured state when link loss happen.
Relates: ES-24215 (errata)
Fixes: BAP/USR/SCC/BV-168-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The list of receives in the Firmware Distribution Server model and
and the Firmware Update Client model are 2 different lists.
In the Firmware Update Client model it is called the Update Receives
state and the Active Update Receivers state which is a subset of
receivers from the Update Receivers State. In the Firmware Distribution
Server model it is called the Distribution Receivers List state.
When Distribute Firmware procedure starts, in the Initiate step, the
Receivers List input (which is the input for the Update Receivers
state), is composed of the Distribution Receives List state. During DFU,
the Update Receivers state becomes the Active Update Receivers state
which keeps only active nodes. Timed out or failed nodes dropped out
from this list. The Distribution Receivers List state stays unchanged
and thus don't need to be populated again after every successfull and
failed DFU.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The task_wdt_add function changes the reload_period of the channel to a
non-null value, which indicates that the channel is used. If the
function is interrupted by a task_wdt_trigger running in ISR context
before adding of the new channel has finished, the next timeout will be
scheduled based on inconsistent channel data.
Using a spinlock avoids such data races.
Fixes#61004
Signed-off-by: Martin Jäger <martin@libre.solar>
Added offset to the model relation register for vendor
models to find correct model index
for Composition Data Page 1. The previous implementation used the
'mod_idx' from the 'bt_mesh_model' struct, which led to issues in the
model relation register due to SIG and vender models having the same
model index.
Modified existing functions related to the model relation
register to take in the offset.
Modified macros for determining if a model is a base- or
extending model.
Added check in 'add_items_to_page' to check whether the model relation
is an extension.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Changed buffer length check in bt_mesh_comp_p1_elem_pull.
The previous threshold would result in the
method not detecting the final element when it consisted of just one
model.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Fixing kernel crash caused by memory release
while having a scheduled work item pending.
Signed-off-by: Jeroen van Dooren <jeroen.van.dooren@nobleo.nl>
When compiling conn.c using arm-none-eabi-gcc version 11.3.1 20220712
with the -Wmaybe-uninitialized flag a warning is emitted due to
pending_no_cb not being initialized. I'm not sure if initializing it to
NULL is the "correct" fix, but it's certainly not any worse then it being
uninitialized, and it fixes the warning.
Signed-off-by: Dennis Grijalva <dennisgrijalva@meta.com>
Connection states are non-trivial to understand based on their names
only, so add short descriptions in the header file explaining what they
do.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix errenous return value in pacs_gatt_notify function. The function
would always return zero, and not forward the error correctly.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Don't reset values set in init callback as it is called only once by
bt_mesh_init call. The reset callback is called on every node reset.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
A few of the length checks that deal with HCI packets coming from the
controller were using assert statements. But the recommended practice is
to drop invalid packets and continue execution whenever a malformed
packet arrives from an external source, so replace those assert
statements with branches that will drop the packet and return.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixed issue when reprovisioning is done on a device with
both RPR client and server on the same device.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The existing formula for the amount of data that can be filled
in in the current PDU is correct but confusing. Replace it with
a simpler formula.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Updates the chaining for advertising.
Instead of unconditionally adding a new PDU when new data
is added we now instead fill the last PDU in the chain with
the incoming data, only adding a new PDU when there is
not enough room.
This reduces the nr. of PDUs used for advertising, and also
fixes some qualification failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The indexes were reset to 0 for each subgroup, which meant
that if we had a broadcast source with 2 subgroups and
1 BIS in each, both of them would use index 0x01.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A race condition between ATT RX and the connection teardown can happen, as
the teardown is executed from a workqueue.
For example:
- connection is established
- `connected` cb is called (in BT RX context)
- user calls `bt_conn_disconnect` in that cb
- connection is marked as disconnecting
- ATT teardown & general conn cleanup is scheduled
- BT RX gets an ATT request, tries to handle it
- ATT bearer is still not GC'd, so it tries and fails to send it
-> results in error message "not connected" on log
- ATT teardown & general conn cleanup runs
To avoid that, we not only check the bearer state, but also its ACL conn
state.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Fix leak in scheduled ticker node when rescheduling ticker
nodes.
Applications having active Extended Advertising or Observer
role with the use of ticker reschedule in window feature
would experience assertion check failure due to delayed
radio event preparation or stalled controller with no active
roles.
Fix updating of the ticker linked list when handling
rescheduled tickers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use UTC time by default, and add the option to use local time.
Also, change the default formats to comply with ISO-8601.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
When the legacy LLCP implementation was removed this Kconfig option was
mistakenly left over. Remove it now with all its users.
Fixes#63212.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This module calls `log_output_*` functions so it should enable
the `LOG_OUTPUT` Kconfig option explicitly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit sets the C/R (command/response) bit when UIH
CMUX frames are sent from the modem_cmux module. This bit
is ignored by some modems like the Quectel BG95, as there
is no defined response to this specific CMUX frame type.
However, other modems, like the TELIT ME910, require the
bit to be set (command). If the bit is not set, the modem
will simply ignore the frame completely.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Make the aa argument const to solve a Coverity issue
that assumes that any value that is being byteswapped
is tainted. Making the argument const should avoid
this assumption from Coverity.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix the coverity issue CWE570, comparison of unsigned int to 0
in the definition of IS_SYNC_ISO_HANDLE
There is a potentially the same issue for IS_ADV_ISO_HANDLE,
fixed that as well
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
`smp_send_pos` is 16 bits wide but it was being
passed as uint8_t, thus truncating.
This made it impossible to receive packets
larger than 256 bytes.
Signed-off-by: Stasys Aužbikas <stasysau@gmail.com>
If RPR server is used then Mesh settings work queue
requires more size during provisioning procedure.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The check for number of streams in a subgroup was reversed, so
it would never allow for correct values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently context->local is not set for offloaded interface.
This change move net_offload_bind call after set of context->local.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Added run-time BT_CENTRAL role check for the path that was
central specific and did not have such check.
When multi-role BT device tried to pair without bonding (peripheral role)
while already previously bonded with the same device on another
Bluetooth identity, pairing failed.
It executed central-specific code, which should not be executed in case
when the device acts as peripheral (as it is even opt-out from code when
CONFIG_BT_CENTRAL is not enabled).
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
In ll_setup_iso_path cis is only ever set if CONFIG_BT_CTLR_CONN_ISO
is enabled, and similarly adv_stream is only ever set if
CONFIG_BT_CTLR_ADV_ISO is enabled.
The two assignments were reported as dead code by Coverity due
to this, which has been fixed by guarding the code with
the respective Kconfigs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BT_SECURITY_FORCE_PAIR option gets overridden when CONFIG_BT_SMP_SC_ONLY
or CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY is defined. Cache the bit value
before overrides.
Add explicit forced pair handling to existing security level check.
Functionality did not change as this was done implicitly due to integer
comparison for enums.
Add extra clarification to the method doc.
Signed-off-by: Rait Rääk <raitraak@gmail.com>
Only confirmable messages need pending tracking. Non-confirmable
messages are released after sending.
Match incoming packets with token, not message ID.
Ignore responses with non-matching tokens.
Remove unused function send_reset().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
In case observation token changes (the LwM2M server re-sends
observation request to the client), the LwM2M engine should cancel any
ongoing notifications based on the old token. Otherwise, it will be
impossible to match the pending notification reply (ACK) with the
observer context anymore, causing new notifications for this
observation to stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove the terminate_ack from struct ll_conn since it is
not used anywhere, and results in dead code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The remaining bit should be zero if auth is
shorter than PROV_AUTH_MAX_LEN and it should
be trimmed by removing octets with indexes
higher than PROV_AUTH_MAX_LEN.
Signed-off-by: Alperen Şener <alperen.sener@nordicsemi.no>
Zephyr's code base uses MP_MAX_NUM_CPUS to
know how many cores exists in the target. It is
also expected that both symbols MP_MAX_NUM_CPUS
and MP_NUM_CPUS have the same value, so lets
just use MP_MAX_NUM_CPUS and simplify it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The compiler emits a "null where non-null expected" warning unless the
argument of strlen is non-null at compile time.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The maximum size of an extension accept by the shell
was previously a define and is now made configurable through Kconfig.
Signed-off-by: Kai Meinhard <meinhard@gessler.de>
Always clone net_pkt to pass to promiscuous queue.
Previously, net_pkt was passed to L2 before conditionally cloning.
But L2 would in some cases strip ethernet headers, so cloned
net_pkt received through promiscuous interface would be missing headers.
Signed-off-by: Kieran Tyrrell <kieran@sienda.com>
The mode command operation has to be set to WIFI_MGMT_GET when the
option -g is provided. It was mistakenly set to true. Correcting the
same
This PR fixes#63424 and sets the proper value for the get command
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Fix issues when setting new values in cfg that modify
the length of the codec configuration LTV value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added comment to KConfig.iso file to make description
of BT_ISO_TX_MTU and BT_ISO_RX_MTU more clear
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
iso_has_ts wasn't set correcrly for fragments of HCI ISO Data packets,
now it is set depending on timestamp
provided in the original buffer provided by host user
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
this commit partially reverts e460847b60
According to Core Spec 5.4, Vol. 4, Part E, 5.4.5, Data_Total_Length field
contains length of the whole packet including optional fields of SDU
(Time_Stamp, Packet_Sequence_Number, ISO_SDU_Length, RFU and
Packet_Status_Flag). In Zephyr Host, Data_Total_Length value
is stored in bt_dev.le.iso_mtu field.
Therefore, there is no need to calculate iso_hdr_len(),
this length is already taken into account in conn_mtu(conn).
This commits removes iso_hdr_len() function and fixes
calculation of HCI ISO Data packet length calculations.
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
Fix number of completed packets generated when BIS HCI ISO
Data packets sent to Controller are in fragments. Use the
ISOAL stored sdu_fragment count to generate the number of
completed packets count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Kconfig option to turn off ISO Data Packet Sequence Number
use to place the ISO Data in the correct radio event,
instead simply buffer it to next radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO data timestamp to reflect the SDU reference point
and not the ISO event anchor point when PDUs received after
retransmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use of payload_count for supporting flush timeout in
Central and Peripheral ISO Lower Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not explicitly check buf parameter in usbh_req_setup()
but add ASSERT to check unresolved data stage conditions.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add command to get the current device configuration.
Revise the shell part to have a set|get configuration
subcommands.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
With the latest change, there is no need for this structure
to be used as a completion handler.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use the USB device structure and wrappers introduced earlier.
With this patch, users of ch9 requests do not need to work
directly with the UHC API. The requests are now blocked until
there is a response from the UHC. Callers finally have access
to the data buffer and request status.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a structure to represent a USB device and wrappers to avoid
glue UHC calls when operating on devices. Although there is a long
road to device configuration and management, we can start with
the tools that can also be used for USB device support testing.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove ugly hack to call class driver ops.
This is preparation for later changes where we will change
parts to work on structure that represents USB device and
not on glue UHC functions.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The current approach is a bit impractical in the upper layer.
This patch removes the two fifos that hold the transfer buffers
and replaces them with a byte array for the setup packet and
a pointer to a data buffer. The data buffer is mandatory for
all types of transfers except control without a data stage.
The waste of eight unused bytes for non-control transfers should
be insignificant, since an additional pointer would be at least
half of it, and then there would be the overhead of handling it.
This patch also clean up the transfer flags, rename owner to callback
as it reflects the upper layer use case, and add an additional member
to hold the pointer to the USB device (peripheral on the bus).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit adds support for finding registered mcumgr command groups.
By default, supported command groups are local to the namespace where
they're registered. This api addition allows applications to get
reference to these supported command groups to deregister & re-register
them.
This adds scope for applications to support multiple implementations
of a command group alongside the default.
Signed-off-by: Chandler Keep <chandlersamkeep@gmail.com>
This PR adds a mechanism to avoid calling open() or close()
on pipes which are already opened or closed respectively.
This optimization can help simplify backends implementing
the modem_pipe API by avoiding duplicated boilerplate code.
The TTY backend test suite has been updated to match the
new behavior.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds a check to prevent attempting to reestablish
the PPP session if the carrier is down. Without this check,
the PPP FSM attempts and fails to establish a PPP session
twice before giving up. The behavior is not breaking anything,
but it is not desired.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Rearranges the k_mem_slab fields so that information that describes
how much of the memory slab is used is co-located. This will allow
easier of its statistics into the object core statistics reporting
framework.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adds the linkable loadable extensions (llext) subsystem which provides
functionality for reading, parsing, and linking ELF encoded executable
code into a managed extension to the running elf base image.
A loader interface, and default buffer loader implementation,
make available to the llext subsystem the elf data. A simple management
API provide the ability to load and unload extensions as needed. A shell
interface for extension loading and unloading makes it easy to try.
Adds initial support for armv7 thumb built elfs with very specific
compiler flags.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Co-authored-by: Chen Peng1 <peng1.chen@intel.com>
Co-authored-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
A minor overlook from the recent ICMP rework, the registered handlers
should no longer unref the processed packet as it's now the
responsibility of the ICMP module.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update the function name from codec_cfg_get_chan_allocation_val
to just codec_cfg_get_chan_allocation, and add
codec_cfg_set_chan_allocation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
As we already log fragmented packets there's no need to log them again
unless they have been fully assembled and the result is to be logged.
We also want to log the final packet in all cases (after mangling LL
address) for the non-fragmented case.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
It is the general rule in Zephyr's network stack that methods that
return NET_OK are expected to have "consumed" the packet, i.e. it should
not be referenced any more.
This change applies this rule to the methods in ieee802154_mgmt.* for
improved consistency with the remainder of the network stack.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The "encryption only" security level was deprecated in IEEE
802.15.4-2015. This deprecation has already been introduced in the code
but was overlooked in net config.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
A little refactoring that simplifies dealing with nanosecond timestamp
values in packets and further decouples calling code from PTP:
Benefits:
- simplifies calling code by removing redundant conversions.
- prepares for removing PTP dependencies from net_pkt.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Fixed bug where changing the syslog network server's address while it's
still running would fail most of the time
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
The current zperf tcp/udp download command doesn't provide the option
to bind the server to a specific host address. If there is more than
one interface, it will not be possible to test each interface with zperf
tcp/udp download command without building the Zpehyr.
This patch will add support for zperf tcp/udp download command to bind
server to host interface address.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Add the bt_audio_codec_cfg_set_frame_blocks_per_sdu function
to set or add the frame blocks per SDU field in the
codec configuration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a new event for LWM2M_RD_CLIENT_EVENT_DEREGISTER for
indicate LwM2M client dereistartion.
Updated unit test and sample for new event type
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Fix a clang warning
ull.c:1235: warning: use of bitwise '|' with boolean operands
The result of ({1/0} &&(int)) is either true(1) or false(0),
not the int and therefore bm is not a bitmask, but just true(1)
or false(0) all together.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enables support for custom function codes. Modbus specification allows
vendor specific function codes in the range 65-72 & 100-110 [1] and this
feature allows users to implement custom logic for those codes.
Additionally, since the Zephyr Modbus stack doesn't implement all defined
Modbus fcs this feature allows users to add support for codes outside the
basic register reading / writing functionality offered by Zephyr.
Custom function codes can be added on a per-interface basis and the handler
structures are allocated by the caller.
[1]: https://modbus.org/docs/Modbus_Application_Protocol_V1_1b.pdf
Signed-off-by: Henrik Lindblom <henrik.lindblom@vaisala.com>
The experimental status of the PPP L2 is long overdue so
it can be removed as the component is working fine.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Z_LOG_EVAL was used in place where COND_CODE_1 was a much
better fit. Z_LOG_EVAL gave the same result but it was not
intended to be used here.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
log_filter_set() is defined to return the actual level that was set by the
call. In case runtime filtering is disabled, this is always the compiled-in
log level, not the level passed by the user.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add the bt_audio_codec_cfg_set_octets_per_frame function
to set or add the octets per frame field in the
codec configuration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Split the bt_audio_codec_meta_get functions to cfg and cap
variants. This provides a more explicit API where users
do not need to dereference their cfg/cap structs in order
to use this functions.
Furthermore this will also make the get functions more
similar to the upcoming set functions, where the set functions
will require the use of the cfg and cap structs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The firmware on these devices seems to have a bug that can cause reordering
of received packets. This can lead to new GATT requests being received
before the acknowledgement of the previous GATT response, accompanied by
log messages like the following:
<wrn> bt_att: bt_att_recv: Ignoring unexpected request
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
This adds a function k_object_is_valid() to check if a kernel
object exists, of certain type, and has been initialized.
This replaces the same (or very similar) code that has been
copied from kernel into the network subsystem.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds command allowing to query information on bootloader.
In this case support is provided to query MCUboot information.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The original idea of z_current_get() was to be the counterpart
of k_current_get() when thread local variable for current has
not been initialized if TLS is enabled, otherwise they are
the same function. Now since z_current_get() is being used
outside of core kernel, rename it under kernel namespace so
other subsystem can conceptually use them too.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Re-add the `WIFI_MGMT_FORCED_PASSIVE_SCAN` option removed in #62751.
Now that `struct wifi_scan_params` is a reasonable size, we can enforce
the passive scan request even when no parameter struct is supplied by
the user.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Instead of providing a comma seperated list of SSIDs, provide the SSIDs
individually. This substantially simplifies the implementation.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix bug in timeout_expired() function. Coap client was resending
pending messages after 500 ms (COAP_PERIODIC_TIMEOUT) and didn't
wait for retransmission timeout.
Use 64-bit k_uptime_get()
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Hides types used in the IEEE 802.15.4 L2 sub-API and L2-internal APIs
that are of no public interest and improves documentation of the
remainder.
The changes are mostly minor as the API documentation had already been
improved and clarified in previous changes. Also includes non-visible
documentation to the subsystem-internal Frame API by adding references
to the specification.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Write documentation for conn_mgr and its subsystems, especially
guidelines for writing connectivity implementations
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Refactor the codec_cfg_get_freq function to return the assigned
numbers value, instead of a converted value, but with
support for converting the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For asymetrical features there needs to be a separate mechanism to
unmask features in peer. This must be used in central for unmasking in case
of 'unsupported in peer' condition for CIS Create.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a CIS create is requested prior to having a complete feature exchange
the central will initiate a feat exch before enqueing the CIS create.
IF then the feature exchange results in peripheral NOT supporting
CIS create the central needs to allocate an RX node for the NTF
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Binary descriptors are data objects stored at a known location
of a binary image. They can be read by an external tool or image,
and are used mostly for build information: version, build time,
host information, etc.
This commit adds initial support for defining such descriptors.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The purpose of this test is to prove that the zephyr host can handle the
behavior described in the Bluetooth Core Specification Vol.3 Part.F
3.3.2 "Sequential protocol".
The host should be able to handle all of those in parallel: one
indication, one write request, multiple commands and multiple
notifications.
The "tester" part had to be written with a "tiny host" implementation
instead of the Zephyr host, as the ZH conflates GATT client and server
and doesn't allow a device to enqueue an ATT request + an ATT indication
on the same bearer.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
If the peer is a zephyr host, there is no problem, as the Zephyr
host limits sending parallel REQs and INDs.
But the spec allows sending those in parallel, and it may end up that
the re-used REQ buffer hasn't been destroyed when an indication comes.
Only re-use the buffer when enqueuing ATT responses.
This means that we may run out of buffers if the peer sends too many
indications and our application also sends a lot of commands/notifications.
The rationale for this is that having to handle a lot of requests is a
more plausible scenario (e.g. being discovered by multiple peers) than
handling lots of parallel indications.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Fix ULL_HIGH ticker operations count, it is discovered in
new BabbleSim test implementations that mesh tests using
Extended Advertising and Scanning enqueue upto 4 ticker
operations before ULL_LOW ticker_job could process it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
bt_iso_cig_reconfigure would almost always fail due to invalid
checks that did not take the functioner properly into account.
The CIS provided to bt_iso_cig_reconfigure can now be allocated
beforehand, if the CIG for the CIS is the same as the one being
reconfigured.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CONFIG_NET_L2_WIFI_SHELL isn't always enabled.
But these functions might still be used, so need to
move functions into mgmt.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
If an IPv4 address is requested on an IPv6 interface or vice versa
use a sane default fallback address to send the response.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The zperf shell sends a IPv6 ping at the start when working
with IPv6. Convert the sending of the ping to use the new API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add suitable functions that offloaded network device driver
can receive ICMP Echo-Request (ping) requests and give
ICMP responses back when it receives them from the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add new net_if_is_offloaded(iface) that returns true if
the network interface is offloaded (either IP or socket
offloading is enabled for that interface) and false if
the interface is not offloaded.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to send ICMP Echo Request message a.k.a pings.
The same ICMP API and framework is used for network stack
internal needs in later commits. One benefit for this new
API is that it allows sending Echo Requests to offlined
network devices.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add DHCPv6 support to the net config library. In case DHCPv6 is enabled,
net config will attempt to acquire IPv6 address and/or prefix when used.
The user can select with Kconfig whether to request address or prefix
(or both).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a DHCPv6 client implementation for Zephyr (RFC 8415).
The implementation allows to request IPv6 address and/or prefix from the
DHCPv6 server, and for now supports only the mandatory set of DHCPv6
options needed to achieve this. Currently the implementation supports
the following scenarios:
* Requesting new IPv6 address/prefix with Solicit/Request exchange
* Refreshing existing leases with Confirm, Renew or Rebind (depending
on the context).
For now, no Information Request (the case where neither IPv6 address or
prefix are requested) is supported. No support for Reconfigure was added
either, as this is optional (the client manifests clearly to the server
that it does not support Reconfigure). Support for these can be added
later if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds a bootloader configuration interface which allows for a
bootloader (e.g. MCUboot) to set configuration in a shared data
area which is then read by the application.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Besides the changed channel reference, the message subscribers receive a
copy of the message during the VDED execution. ZBus guarantees message
delivery for `MSG_SUBSCRIBERS`.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Code using sys_csrand_get should depend on CONFIG_CSPRNG_ENABLED symbol
and not in ENTROPY_HAS_DRIVER since they are not using the entropy
device directly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
irq_lock() does not make this this csprng api thread safe
in SMP systems. Change it to use a mutex.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Replaces the previous approach to define bands via hardware capabilities
by the standard conforming concept of channel pages.
In the short term this allows us to correctly calculate the PHY specific
symbol rate and several parameters that directly depend from the symbol
rate and were previously not being correctly calculated for some of the
drivers whose channel pages could not be represented previously:
* We now support sub-nanosecond precision symbol rates for UWB. Rounding
errors are being minimized by switching from a divide-then-multiply
approach to a multiply-then-divide approach.
* UWB HRP: symbol rate depends on channel page specific preamble symbol
rate which again requires the pulse repetition value to be known
* Several MAC timings are being corrected based on the now correctly
calculated symbol rates, namely aTurnaroundTime, aUnitBackoffPeriod,
aBaseSuperframeDuration.
In the long term, this change unlocks such highly promising functional
areas as UWB ranging and SUN-PHY channel hopping in the SubG area (plus
of course any other PHY specific feature).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
In `gatt_write_ccc_rsp`, the third field of
`SYS_SLIST_FOR_EACH_NODE_SAFE` was use as the `prev` sys_node when
calling `gatt_sub_remove`. This was wrong because the third field of
`SYS_SLIST_FOR_EACH_NODE_SAFE` is actually the next node.
Fix the issue by adding a pointer to the previous node and passing it to
`gatt_sub_remove`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Fix BIS implementation for checking overrun of the BIS PDU
sliding window buffer overrun.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Provisioner should be able to manage received capabilities
unconditionally. Mandatory oob authentication is the node
feature and it is still compile time feature.
Split handling of this feature on provisioner and node part.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
According to specification it is possible to provide
static oob value with any length. Mesh should trim or
append\prepend by zeroes if it is longer\shorter than
required value.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add BT_CTLR_EVENT_OVERHEAD_RESERVE_MAX Kconfig to allow the
omit of EVENT_OVERHEAD_START_US and EVENT_OVERHEAD_END_US in
the time reservation calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This change from using the mechanic of CONFIG_BT_KEYS_OVERWRITE_OLDEST
to instead handle the bonding cache through bond_deleted.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Added retry mechanic to CSIP notifications by adding them into system
workqueue. Bookkeeping is done for notifications for all clients, and
potentially disconncted clients will also receive notifications on
reconnect. This also adds mechanic to restore the local clients list
upon registration of the service, as well as BSIMs to test notify on
reconnect.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Reformated csip_set_member to use atomic flags for notifications
instead of a pending notification array. This better conforms the
style of the code to how its done in other LE Audio services.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Previously each piece of LwM2M SEND was
using token length of zero. I think this was unintentional.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To protect the integrity of outgoing block-wise transfers, append
Etag option that allows client to see if the received block is
generated from same content as it is expecting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow blockwise-send buffers to be used with GET and FETCH
queries as well.
When outgoing packet is split into multiple blocks, don't free
it when first block is send. Keep it in memory until some other requests
come.
Following queries to next block are matched using CoAP token.
However, this required Leshan to use COAP.BLOCKWISE_REUSE_TOKEN=true
option from Californium.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
lwm2m_udp_receive() is only called with same function
pointer, so there no need to carry that in the parameter.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In reality, single-write is the only operation that handles
BLOCK1 operations when receiving paylod.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Partial content format support is required to have a proper support
for content format OPAQUE instead of threading it as a part of
plain text format.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Back-to-back Tx Rx implementation was incorrect for nRF53
that uses DPPI. Both current and next DPPI channels where
enabled in the implementation which only worked correctly
to have the right tIFS when current and next PDU length
were same.
Fix ensures that the correct current DPPI is subscribed
to by the radio subscribe.
The implementation has been refactor to be able to use the
current sw_tifs_toggle value in the HAL implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added functionality to change the syslog server's
ip address at runtime as well as sample for
syslog network backend
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
Move commands that require parameters first into the list.
Move syntax line first, command documentation second,
flags last. This is much like Unix commands do
❯ /bin/ls --help
Usage: /bin/ls [OPTION]... [FILE]...
List information about the FILEs (the current directory by default).
Compared to:
uart:~$ lwm2m
lwm2m - LwM2M commands
Subcommands:
read :read PATH [OPTIONS]
Read value from LwM2M resource
-x Read value as hex stream (default)
-s Read value as string
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Fix CIS assymmetric PHY usage by adding implementation to
use correct PHY in radio when switching transceiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing NRF_CCM subscribe clear which can lead to
spurious trigger of TASK_CRYPT in NRF_CCM. This may
lead to corruption of Rx PDU buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We must send the packet without queueing it. The pkt has already
been queued for sending, once by net_if and second time in the ARP
queue. We must not queue it twice in net_if so that the statistics
of the pkt are not counted twice and the packet filter callbacks
are only called once.
Fixes#62483
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The commit adds support for uploading image to board with MCUboot
configured with DirectXIP with revert.
It allows to set uploaded image either for test or as permanent
boot application, until newer image gets confirmed.
Note that in DirectXIP with revert MCUboot will remove image
that has not been set for test nor confirmed and MCUmgr does not
set either mode unless image has the mode set within uploaded
binary.
The commit adds Kconfig option
CONFIG_MCUBOOT_BOOTLOADER_MODE_DIRECT_XIP_WITH_REVERT
that enabled the new mode of operation within MCUmgr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
hal_radio_tx_chain_delay_ns_get() was incorrectly
returning the microsecond value, resulting in a 1us
error in the timing => Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align the header a bit with the one for the real radio,
adding missing Tx power levels and removing TODO which did not
need doing.
The old one originated as a copy of the nrf52833 one, and did not
evolve like the real ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove a few macros which are not used anywhere in the tree.
For the sake of simplifying the header and easing its understanding.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The following changes have been done:
1.
HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_REGISTER_TASK(index)
= HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_TASK(channel)
has been convered into
HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_REGISTER_TASK(index, channel)
2.
HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_REGISTER_TASK(index)
= HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_TASK
Which was only used in one place, has been replaced with the
equivalent HAL call
3.
HAL_SW_SWITCH_GROUP_TASK_ENABLE_PPI_REGISTER_TASK(index) = 0
was replaced with the HAL subscribe clear function
nrf_dppi_subscribe_clear(NRF_DPPIC,
HAL_SW_DPPI_TASK_EN_FROM_IDX(SW_SWITCH_TIMER_TASK_GROUP(index)));
4.
NRF_DPPIC->SUBSCRIBE_CHG[group].EN/DIS = 0;
have been replaced with the equivalent HAL clear call
5.
NRF_DPPIC->TASKS_CHG[group].DIS = 1;
have been replaced with the equivalent hal task_trigger() call
6.
Manually setting the CHG registers, has been replaced with a
clear + add (because the hal does not have a set function yet)
So,
NRF_DPPIC->CHG[group] = value
has been replaced with
nrf_dppi_group_clear(NRF_DPPIC, group);
nrf_dppi_channels_include_in_group(NRF_DPPIC, value, group);
(A set function has been requested from the HAL team)
Note: There is other direct registes writes to the dppi subscribe and CHG
registers in the coded phy parts which have not been changed yet.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This requirement was implicit as the only backend the host is currently
tested with behaves this way.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Fix regression in sw switch single timer id use for nRF53x
series SoC.
Regression introduced in commit cfcbe5d68e ("Bluetooth:
Controller: Remove redudant header file includes").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Be explicit about the HCI backend that Bluetooth unit tests require.
Some unit tests depend on `BT_HAS_HCI_VS`, so also enable that.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Rename the bsim header in preparation for having more
simulated targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To avoid a build error when coded phy is not enabled
for a nrf53: These three functions are only used for coded phy,
and depend on macros which are only defined if coded phy
is enabled.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch use of kconfig:
* SOC_SERIES_NRF53X -> SOC_COPATIBLE_NRF53X
* SOC_NRF5340_CPUNET -> SOC_COMPATIBLE_NRF5340_CPUNET
to also select those options/code when building for
the nrf53 simulated targets.
Also switch three kconfig range dependencies from
SOC_SERIES_NRF52X to SOC_COPATIBLE_NRF52X
(IRQ priority related) for consistency. These sound
not really have an impact.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix assertion due to late Peripheral CIS active flag being
initialized. CIS active flag shall be initialized when it is
acquired.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
It is always possible to bind to same port if the sockets
are in different address family.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Turn the nested arrays of `scan_params->chan` into a single array.
This adds the requirement to specify the band for each channel, but
eliminates the large amount of dead memory for unused bands. Overall,
this saves 50% of the RAM space for this variable.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Make the maximum number of channels that can be manually scanned
configurable by the application. The previous value of 233 was vastly
overallocating memory as the largest band only contains 60 allocated
channels.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
A few attributes isn't cloned togerder with pkt.
This commit add missing part.
Additionally, because the `eof` flag in net_pkt structure is
avilable unconditionally hence `#if defined(CONFIG_NET_SOCKETS)`
guard has been removed form setter and getter functions for
this flag.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
In net_pkt structure couple of flags are no longer used.
Flag pkt_queued can be removed permanently togeter with setter
and getter functions.
Second flag sent_or_eof has been renamed because it is still
used partially only for indicating EOF. Additionally unused setter
and getter for 'sent_' part of this flag are removed.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
Maximize BIG event length to extend upto ISO interval, and
allow PTO and Control subevents to be pre-emptible.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Calculate Broadcast ISO event overheads due to extended and
periodic advertising events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updates possible return errors for fs mgmt file upload, to clarify
when a provided path is on a read-only filesystem or if the mount
point does not exist.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In spec:
The LwM2M Client MUST reject any LwM2M Server operation on
the Security Object (ID: 0) with an "4.01 Unauthorized" response
code.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
With bootstrap one function is unused. Fix by changing
ifdef to if (IS_ENABLED()) so linker can drop it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If autoinit is not enebled, it is allowed to build a few backends and
initialize a proper one in runtime.
Check number of backends only if autoinit is enabled.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The header file contains mixture of functions and static arrays.
Replacing static arrays to functions.
Initialize functions in C file.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Fix missing Coded PHY implementation conditional compile
causing compile error when disabling Coded PHY support in
SoCs that have radio that support Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Revert EVENT_OVERHEAD_START_US value for Coded PHY support,
needed to pass LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-25-C.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce number of successive calls to ticker_job() by
disabling mayflies in the ULL_HIGH priority, enqueue
ticker_yield_abs() and ticker_start() before re-enabling
so that single ticker_job() handles both yield and start.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix short prepare handling when more than one event is
enqueued in the pipeline and the short prepare is placed at
the end of the prepare pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticks_slot_window use in Observer, do not use for
unreserved continuous scanning, and do not use when scanning
on both 1M and Coded PHY simultaneously.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use ticker_ticks_diff_get consistently when calculating
difference between ticker ticks when determining short
prepare requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the state/role context parameter in prepare pipeline
to identify the preempt timeout that was setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
These change are reverted as part of fixing regression
failure in LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-25-C.
This reverts commit 0d54ca8761.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for reading and writing long values (> MTU)
when using the CAP API.
This change does make it slightly slower to execute the
CAP procedures as it is now done on a one-by-one basis,
which affect multi-ACL setups, but that also means
that the buffer requirements for CAP will generally be lower.
There is still room for improvement as we can perform the BAP
operations in parallel on each ACl, which should return this to
its former performance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the wifi_mgmt interface overriding default values with values
from kconfig. The defaults were only applied when a `params` struct was
provided by the application.
This is the case when the application is explicitly setting the options
it wants, why is the mgmt API changing these. When `params` is NULL and
thus modem defaults are requested, these defaults aren't applied. This
is the opposite behaviour from what seems reasonable.
In addition, these options are:
* Undocumented
* Using non-trivial string parsing functions (strtok)
* Adding complexity to the API implementation by forcing support for
ROM versions of command line arguments.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add parsers to retrieve metadata values from codec
capabilities and codec configuration structs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the order of operation in
broadcast_sink_iso_disconnected so that when the application
gets the last stopped callback, the BIG has already been cleaned
up, and the broadcast sink is in a reusable state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of calling ase_release for each ASE in the ACL
disconnected callback, we now call the state_transition_work_handler
directly. This is to ensure that when the disconnected callback
returns, the bt_conn object has been properly unref'ed in
a timely manner.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace the BT_AUDIO_CODEC_LC3_ID macro with the
BT_HCI_CODING_FORMAT_LC3 as there is no reason to
define and use the LC3 ID different than the other
allowed codec IDs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When using BT_HCI_CODING_FORMAT_TRANSPARENT as the codec_id, the
codec configuration (cc) len sent to the controller shall be 0.
Since this goes for all devices, we ensure that we don't
send invalid codec ID and cc data over air.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the bt_bap_broadcast_source_reconfig to use the same
parameter struct as bt_bap_broadcast_source_create so that
the two are more similar, since they both set the same values.
This allow for full control of which subgroups and stream
are updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There was a new Kconfig for USB-C init priority that is conflicting
with currently used Kconfig for init of VBUS and TCPC.
This commit changes the names to more specific related to the subsystem
they belong to.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
This commits adds support for the SO_REUSEPORT socket option.
The implementation follows the behavior of BSD and tries to also follow
the specific additional features of linux with the following
limitations:
* SO_REUSEADDR and SO_REUSEPORT are not "the same" for client sockets,
as we do not have a trivial way so identify a socket as "client"
during binding. To get the Linux behavior, one has to use SO_REUSEPORT
with Zephyr
* No prevention of "port hijacking"
* No support for the load balancing stuff for incoming
packets/connections
There is also a new Kconfig option to control this feature, which is
enabled by default if TCP or UDP is enabled.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commit adds support for the SO_REUSEADDR option to be enabled for
a socket using setsockopt(). With this option, it is possible to bind
multiple sockets to the same local IP address / port combination, when
one of the IP address is unspecified (ANY_ADDR).
The implementation strictly follows the BSD implementation and tries to
follow the Linux implementation as close as possible. However, there is
one limitation: for client sockets, the Linux implementation of
SO_REUSEADDR behaves exactly like the one for SO_REUSEPORT and enables
multiple sockets to have exactly the same specific IP address / port
combination. This behavior is not possible with this implementation, as
there is no trivial way to identify a socket to be a client socket
during the bind() call. For this behavior, one has to use the
SO_REUSEPORT option in Zephyr.
There is also a new Kconfig to control this feature similar to other
socket options: CONFIG_NET_CONTEXT_REUSEADDR. This option is enabled by
default if TCP or UDP are enabled. However, it can still be disabled
explicitly.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
Fix the order of setting the flag that indicates that
preempt timeout has been successfully requested versus
the request is waiting to be scheduled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker implementation to prefer to keep ticker node
started in case of race condition to start and stop.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
While matching source address for a given Link-Local destination the
functions iterate over interfaces and return a first result with a
valid LL-address. However, they should first try to fetch address of
the default interface as it not always the first one on the list.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Allow Bootstrap server to close the DTLS connection immediately
after receiving Ack to Bootstrap-Finish command.
This is not an error as either parties are allowed to tear down
the connection.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow certain RD-client states to timeout.
As stated in LwM2M specification:
The bootstrap procedure failed when the LwM2M Client did not
receive the "Bootstrap-Finish" operation after the
EXCHANGE_LIFETIME time period expired.
The EXCHANGE_LIFETIME parameter is defined in RFC 7252
We must handle the case where Bootstrap server is not sending
information towards us.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add state checks for the get_id and get_base functions, as the
ID and base are not valid when the state of the broadcast
source is BT_BAP_EP_STATE_IDLE.
Since the broadcast_source_get_state uses the slist functions,
the broadcast source object for bt_bap_broadcast_source_get_id
can no longer be `const`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When publish buffer run out, no thread active process work.
Fix this, by reschedule process work.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Current MQTT-SN topic and publish allocators are not thread safe.
Fix this, by using k_mem_slab instead of arrays.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Releasing the lock before notifying condvar led to a race condition
between a thread calling k_condvar_wait to wait for a condition variable
and another thread signalling for this same condition variable. This
resulted in the waiting thread to stay pending and the handle to it
getting removed from the notifyq, meaning it couldn't get woken up
again.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
When a packet can't be cloned we crash as we try to initialize the
cursor on a nullptr. We should check if we have a valid pointer,
and if we don't we drop the packet along with a warning.
Signed-off-by: Andreas Ålgård <aal@ixys.no>
In low memory conditions, its possible for socketpair memory allocation
to fail and then the socketpair is freed but after that the remote
semaphore is released causing a crash.
Fix this by freeing the socketpair after releasing the semaphore. Add a
test case to induce low memory conditions (low HEAP and high socketpair
buffer size), with the fix issue is not seen.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This commit optimizes the performance of the script chats by
storing the size of requests with the chat script chat, negating
the need to use strlen() within the modem_chat module every time
a chat script chat request is sent.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This commit adds one new feature, modem_chat_run_script(),
which synchronously runs a script.
The existing function modem_chat_script_run() is async,
and doesn't follow the naming convention created for the
other modem modules, specifically, all functions are sync,
unless appended with _async.
To preserve backwards compatibility, the existing function
modem_chat_script_run() will remain until deprecated. It
simply calls modem_chat_run_script_async().
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Intent is to pass Ellisys ISOAL quality tests for framed TX scenarios
where the TX SDU includes a time stamp that is not based on the
controller's clock.
Changes:
-- Include controller's reception time as a separate field in the TX SDU
information
-- Include decision on whether SDU time stamp is valid and based on the
controller's clock
-- Arbitrate and select / compute time stamp for the SDU
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Changes:
-- Corrected reading and writing time offset in framed segment header to
account for endianness
-- Corrected bit positioning of time offset bit field in the segment
header structure definition
-- Fixed upstream Zephyr BSIM test build failure due to debug logging
39-bit variable
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Changes:
-- Disregards target event after segmenting the first TX SDU and instead
decide event based on the next payload and feasibility to fragment
for that event (time-offset > 0)
-- Corrected error SDU release logic when an error occurs while
expecting the start of a new SDU, to avoid releasing an SDU which
could be received in the next payload or event
-- Included additional debug logging
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Revert back the EVENT_OVERHEAD_END_US value to original
value in initial commit 5c3709c13f ("bluetooth:
controller: Add def's re. update to slot reservation calc").
40 us is a sufficient margin considering ~30 us being the
worst case Rx chain delay for S8 Coded PHY on nRF5x SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rather than yielding to idle thread, keep the part awake.
So debugger can still access it,
since some SOCs cannot be debugged in low power states.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This adds support for the Upload OOB Start message to the DFD server, by
providing callbacks that the application can use to hook any OOB scheme
into the model behavior.
There are also extensive changes to the dfu_slot module, to accomodate
the new needs that appeared with the support for OOB transfer (mainly,
fwid, size and metadata are no longer available when the slot is
allocated, they appear later in the handling).
Signed-off-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
All WiFi channel numbers fit within a 8 bit number, as the maximum
allocated channel is 233. This halves the memory requirement.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The errors are printed in hex, but no prefix was used. This could be
confused with usual errno return values. The 0x prefix makes clear
that it's a hex value.
Also a missing minus sign is added to one log message.
Signed-off-by: Martin Jäger <martin@libre.solar>
NET_STATISTICS_PPP are dependend on NET_L2_PPP, not on NET_PPP.
This allows to use statistics also in modem subsys.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Add check for device busy when CONFIG_PM_NEED_ALL_DEVICES_IDLE is
set to y because one or more devices may still in busy and causes
problem when system go into low power in Intel ISH platform.
Signed-off-by: Leifu Zhao <leifu.zhao@intel.com>
Usage of application level for device drivers needs to be avoided. Also
introduced a new init level, with default to 90 as other dependencies of
USB-C run at priority 80.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Convert the driver to a dt-based device. Also update Kconfig so that it
depends on the right compatible being enabled, initialize in POST_KERNEL
(APPLICATION should not be used for devices) and remove one redundant
include.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The device model was not used for anything useful, only to call some
init code. Change to SYS_INIT instead.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This is the final step in making the `zephyr,memory-attr` property
actually useful.
The problem with the current implementation is that `zephyr,memory-attr`
is an enum type, this is making very difficult to use that to actually
describe the memory capabilities. The solution proposed in this PR is to
use the `zephyr,memory-attr` property as an OR-ed bitmask of memory
attributes.
With the change proposed in this PR it is possible in the DeviceTree to
mark the memory regions with a bitmask of attributes by using the
`zephyr,memory-attr` property. This property and the related memory
region can then be retrieved at run-time by leveraging a provided helper
library or the usual DT helpers.
The set of general attributes that can be specified in the property are
defined and explained in
`include/zephyr/dt-bindings/memory-attr/memory-attr.h` (the list can be
extended when needed).
For example, to mark a memory region in the DeviceTree as volatile,
non-cacheable, out-of-order:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_VOLATILE |
DT_MEM_NON_CACHEABLE |
DT_MEM_OOO )>;
};
The `zephyr,memory-attr` property can also be used to set
architecture-specific custom attributes that can be interpreted at run
time. This is leveraged, among other things, to create MPU regions out
of DeviceTree defined memory regions on ARM, for example:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-region = "NOCACHE_REGION";
zephyr,memory-attr = <( DT_ARM_MPU(ATTR_MPU_RAM_NOCACHE) )>;
};
See `include/zephyr/dt-bindings/memory-attr/memory-attr-mpu.h` to see
how an architecture can define its own special memory attributes (in
this case ARM MPU).
The property can also be used to set custom software-specific
attributes. For example we can think of marking a memory region as
available to be used for memory allocation (not yet implemented):
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_NON_CACHEABLE |
DT_MEM_SW_ALLOCATABLE )>;
};
Or maybe we can leverage the property to specify some alignment
requirements for the region:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_CACHEABLE |
DT_MEM_SW_ALIGN(32) )>;
};
The conventional and recommended way to deal and manage with memory
regions marked with attributes is by using the provided `mem-attr`
helper library by enabling `CONFIG_MEM_ATTR` (or by using the usual DT
helpers).
When this option is enabled the list of memory regions and their
attributes are compiled in a user-accessible array and a set of
functions is made available that can be used to query, probe and act on
regions and attributes, see `include/zephyr/mem_mgmt/mem_attr.h`
Note that the `zephyr,memory-attr` property is only a descriptive
property of the capabilities of the associated memory region, but it
does not result in any actual setting for the memory to be set. The
user, code or subsystem willing to use this information to do some work
(for example creating an MPU region out of the property) must use either
the provided `mem-attr` library or the usual DeviceTree helpers to
perform the required work / setting.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Fix missing lazy calculation when using ticker interface
required for Central CIS create.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix initialization of CIS lazy_active event count used when
first CIS event is active. Now initialization for first and
any subsequent CISes made active.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce the max timeout for shell to 1 second.
Change the sip_svc open shell function to take millisecond as timeout
argument.
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
This PR makes the modem_pipe instances track if they have
data ready to receive, and invoke the RECEIVE_READY event
every time they are attached if the backend implementing
the pipe has notified that receive is ready.
This mechanism ensures that modules attaching to a pipe
get the async RECEIVE_READY event immediately after
attaching to a pipe if there is data ready, instead of
having to poll the pipe, or worse, wait until newer data
becomes available.
The addition revealed a timing issue in the cmux test
suite. Specifically the CMUX instance now immediately
receives the response to a command which the CMUX
instance has not sent yet, causing it to drop the
response.
The CMUX test suite now uses the transaction
mechanism of the mock_pipe to wait for the command
before sending the response.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This patch amends the existing L2CAP accept callbacks to use the new
accept signature that includes a pointer to the L2CAP server structure.
Signed-off-by: Donatien Garnier <donatien.garnier@blecon.net>
Add a pointer to the associated server structure in the L2CAP accept()
callback. This allows the callee to know which server an incoming L2CAP
connection is associated with.
Signed-off-by: Donatien Garnier <donatien.garnier@blecon.net>
The bt_conn_exists_le is commonly hit by users attempting
to connect (either as central or peripheral) to a device
they are already connected to in some way. The current log statement
does not provide particularly much information, so added more.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix some compiler instruction re-ordering. Mayfly code with
cpu_dmb() help avoid stalled memq_ull_rx processing when
rx_demux is to be executed using mayfly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ISO-TP CAN-FD support can be enabled at runtime.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Signed-off-by: Martin Jäger <martin@libre.solar>
SWO reference frequency was set based on `swo-ref-frequency` under `itm`
nodelabel or `/cpus/cpu@0/clock-frequency` property. Not all platforms
configure those.
All ST devices configure CPU frequency in `clock-frequency` under `rcc`
nodelabel. Configuring the same value for each board in
`/cpus/cpu@0/clock-frequency` would be one way to make SWO work out of the
box. There is lots of copy-pasting involved in this, which makes this very
error-prone.
Introduce Kconfig option, which will default to values configured in `itm`
or `/cpus/cpu@0`. The main advantage will be for platforms like ST, where
CPU clock frequency is already configured in another place. Thsoe could
override default value in SoC, board or any other platform specific layer.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The current implementation uses both, host and card capabilites to derive
the maximum bus width to be used. However, in cases where a MMC device is
not connected to the host via shdc using the full bus width of 8 lines,
device initialization fails. Introducing the `bus-width` property
circumvents this by reducing the host bus capabilites and forcing
communication with the MMC device using 1, 4 or 8 lines.
Signed-off-by: Mourad Kharrazi <mourad.kharrazi@ithinx.io>
This change brings in support for setting various Wi-Fi modes and
enables a specific Wi-Fi interface to be also placed into a sniffer
operation via monitor mode and promiscuous mode. A raw TX- packet
Injection mode is also introduced
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Even though the OOB information is optional we can add it
to extended scan reports in cases there is detected unprovisoned
devices.
Referring to MshPRT section 4.4.5.3:
When the Remote Provisioning Extended Scan procedure completes without
receiving an advertisement from the unprovisioned device, the
OOBInformation and AdvStructures fields shall be skipped. When the
obtained data is empty, the AdvStructures field shall be skipped. The
Status field shall be set to Success.
and referring to MshPRT section 4.3.4.9:
The OOBInformation field contains the OOB Information of either the
unprovisioned device or the Remote Provisioning Server.
Signed-off-by: Alperen Şener <alperen.sener@nordicsemi.no>
This adds support to allow any priority from the user instead of
limiting to the protocol values (0-7). This is useful in conveying
custom priorities from application to the driver/chipset.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is handy in testing of setting priority directly rather than
deriving from DSCP. Please note ICMP doesn't use net context.
This is applicable for both shell and API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is a private kernel header with private kernel APIs, it should not
be exposed in the public zephyr include directory.
Once sample remains to be fixed (metairq_dispatch), which currently uses
private APIs from that header, it should not be the case.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the DFM (DevAlert target side code) module and
moves the TraceRecorder module into the percepio module, which
results in the TraceRecorder module definition being removed
from the west manufest and module definition within zephyr.
Signed-off-by: Aron Lander <aron.lander@percepio.com>
This commit adds support for partial matches for the modem_chat
module. A match is a combination of an expected response to a
request along with delimiters to use and a handler for the
parsed response.
The usual behavior of the modem_chat script is to continue to
the next step when any expected response is received. The partial
flag indicates that the script should not proceed to the next
step if the response matches the match. This is useful for
commands which respond with an unspecified number of lines,
followed by an "OK". This flag allows the script to essentially
run in a "while" loop until OK is received.
Along with this addition, a more scalable macro for initializing
the modem_chat match struct, MODEM_CHAT_MATCH_INITIALIZER().
Without this macro, we will need 4 different macros to initialize
the 4 variants of a chat_match, and 8 when the next feature is
added...
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The ICMSG backend now has a dedicated workqueue to process incoming IPC
messages. The system workqueue is no longer utilized for that purpose.
Testing shows that in certain scenarios substituting a RPMsg backend
with ICMsg results in deadlocks.
The deadlocks were a symptom of running a synchronous RPC protocol from
the context of the system workqueue and transpired as follows:
1. The RPC protocol sends a request over the ICMsg backend on the system
workqueue thread.
2. The RPC protocol puts the thread to sleep until response is received.
This puts the system workqueue thread to sleep.
3. The response to the request arrives over ICMsg backend.
4. The backend signals a work item to the system workqueue.
5. The system workqueue is unable to process the response due to being
previously pended on the RPC request.
The deadlock was initially observed with the nrf-802154 driver in
conjuntion with the IPv6 stack.
To prevent this condition from occurring, the approach was selected to
give ICMsg a dedicated workqueue thread.
Added a Kconfig option that enables the dedicated workqueue by default.
The config can be disabled, if the user wants to preserve RAM capacity
and is certain that the deadlock condition is not encountered.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
wifi_utils_parse_scan_ssids could cause a crash if a constant string is
passed to it. Fix this by duplicating the input string parameter before
parsing it with strtok_r.
Also limit the range of the CONFIG_WIFI_SCAN_SSID_FILT_MAX parameter
from 1 to 4 to avoid stack overflow due to users specifying a large
value for this parameter.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
wifi_utils_parse_scan_bands could cause a crash if a constant string is
passed to it. Fix this by duplicating the input string parameter before
parsing it with strtok_r.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Stores persistent on-demand private GATT proxy state in separate
settings entry. This is implemented to avoid issues related to
backwards compatibility between device firmware updates.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Stores persistent private beacon state in separate settings entry.
This is implemented to avoid issues related to backwards compatibility
between device firmware updates.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Makes the long workqueue init priority configurable and sets
the default to 50, this is to allow for relocating bluetooth
libraries to other parts of memory e.g. external flash, and
allows for those flash drivers to be initialised prior to
calling functions residing in them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit delegates the modem_pipe_notify_closed() call
resulting from the UART async API UART_RX_DISABLED event
to the workqueue. This is neccesary as the async UART
callback may be called from ISR context.
modem_pipe_notify_closed() must be called from outside of
the ISR context as it takes a mutex.
The commit also adds a missing break to the async UART
callback, and adds a missing dependency to the Kconfig
for the UART backends, RING_BUFFER=y
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The variables are usually placed into an output region located in FLASH
memory when linking, but the variables are not marked `const`, so the
section ends up with `W` writeable section flag:
```bash
❯ arm-zephyr-eabi-readelf --section-headers build/zephyr/zephyr.elf | \
grep -E '(Section Headers:)|( \[Nr\])|(zephyr_dbg_info)'
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[10] zephyr_dbg_info PROGBITS 60012298 01238c 000040 00 WA 0 0 4
```
Set them as const to set the output section to read-only:
```bash
❯ arm-zephyr-eabi-readelf --section-headers build/zephyr/zephyr.elf | \
grep -E '(Section Headers:)|( \[Nr\])|(zephyr_dbg_info)'
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[10] zephyr_dbg_info PROGBITS 60012298 01238c 000040 00 A 0 0 4
```
Signed-off-by: Noah Pendleton <noah.pendleton@gmail.com>
cur_inst is the copy of ots_client instance to prevent duplicate
API call while client is in middle of read/write procedure.
But cur_inst can only be cleared while write_obj_tx_done or read rx_done.
If ACL is disconnected while read/write is on-going, there is no chance
for cur_inst being cleared.
This causes ots client will no longer perform select/read/write
procedure anymore. API will always return -EBUSY.
Let l2cap_disconnect check if cur_inst is NULL and NULL it
unconditionally as what it is designed.
Make bt_ots_client_unregister public API.
Signed-off-by: Pirun Lee <pirun.lee@nordicsemi.no>
This adds endpoint by stream lookup function used to find the active
endpoints that use the stream object provided. The function is used
instead of dereferencing stream->ep that may be not valid if application
did not memset the stream object.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Once the application bt_bap_stream_ops.released callback is called make
sure the stream->ep pointer is valid so that application can still access
the endpoint details like e.g. endpoint direction.
Fixes: ASCS/SR/ACP/BV-{24,25,26,27,28,29,30,31}-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When using the LC3 codec, the cid and vid fields of the
codec shall both be 0x00, as per the BAP and ASCS specs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a network configuration option to configure whether IEEE 802.15.4
packets are expected to be ACKed or not.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
In the IEEE 802.15.4 area certain settings must be set before
net_if_up() may be called (e.g. the channel).
Also net_if_up() may not be called if
CONFIG_IEEE802154_NET_IF_NO_AUTO_START=y.
This fixes the set-up order and handling of
CONFIG_IEEE802154_NET_IF_NO_AUTO_START.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Use the HAL event clear functions to clear EVENTS
instead of accessing the registers directly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the HAL event clear function to clear the RTC EVENT
instead of accessing the register directly.
This allows using an updated version of the RTC HW models
which generate level interrupts (as the real HW) and in
which if the EVEN register is not properly cleared,
the interrupts are kept high, resulting in the interrupt
handler reentering immediately after exiting.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The command was missing a metalen check, and attempted
to access array of size 0, which could give a build
warning.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds support for composition data page 2 & 130.
In this implementation the responsibillity for filling the page 2
buffer is left to the application through the new comp page 2 cb API.
Only the application can know/decide if the device is NLC compliant,
and must thus be given the responsibillity for cheking the NLC profile
requirements, defined in the NLC specs, and filling the response buffer
for comp data page 2.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
If the central disconnects a CIS while it is being
established, then we receive both a CIS established event
with BT_HCI_ERR_OP_CANCELLED_BY_HOST and a disconnect complete
event.
In this case we should not call bt_iso_disconnected in the
CIS established event handler, as that will also be
called from the disconnect complete event handler.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
As per the core spec, the CIS is not allowed to disconnect
a CIS if it is pending (i.e. in the connecting state).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
So far only object tracing/tracking could be individually disabled (e.g.
CONFIG_TRACING_SEMAPHORE=n). Now tracing of any API may be disabled
(e.g. CONFIG_TRACING_PM=n).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The CIS Central uses the algorithm described in BT Core 5.4 Vol 6,
Part G, Section 2.2 to calculate the Max_PDU value for framed mode.
However, HAP needs the Max_PDU to be calculated according to "Core
enhancement for ISOAL CR" coming with the "Atlanta" update. With this
update, the fragmentation is controlled via a parameter at CIG creation.
Enabling CONFIG_BT_CTLR_CONN_ISO_AVOID_SEGMENTATION will set the
ISO_Interval to 7.5 ms for a 10 ms framed CIG, and calculate Max_PDU to
45/65 for 16/24 kHz.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In case RST packet is received or malformed packet is received, the TCP
should not proceed with the state machine execution (which may process
the invalid packet) but rather jump directly to exit, where the
connection will be closed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The net_mgmt subsystem offers a function which waits (blocks)
until a specified net event occurs. An event callback is
pushed to the stack, then added to the net_mgmt_event_callback
list. If the event occurs, the net_mgmt thread calls the
callback and deletes the callback from the list. However, if
the event does not occur within the timeout specified when
invoking mgmt_event_wait_call() the function will return,
corrupting the callback structure the stack is reused.
This PR fixes the issue by deleting the callback before exiting
in case the event does not occur.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The previous design with dedicated bits in the structure required a
user to explicitly set each bit.
Using one flags variable allows to extend the features more easily
in the future and avoids breaking existing code.
This change is particularly useful for the FDF and BRS flags required
for CAN-FD support.
See also previous similar change for the CAN driver in
f8a88cdb27
Signed-off-by: Martin Jäger <martin@libre.solar>
CAP requires setting the streaming context in the metadata,
which requires 4 octets of metadata, so the metadata for
CAP must be greater than or equal to 4.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In default_get_timestamp(), sys_clock_tick_get() is returned when
CONFIG_LOG_TIMESTAMP_64BIT=y. The timestamp frequency should reflect this.
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com>
According to the mesh 1.1 spec, section 4.4.14.1: “. The access layer
security on the On-Demand Private Proxy Client model shall use the
device key of the node supporting the On-Demand Private Proxy
Server model.“
This commit alters the API and implementation to reflect this.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The backend currently returns the pipe closed event immediately
after calling uart_rx_disable() which is not the correct behavior.
the pipe closed event should be called when the UART_RX_DISABLED
event is raised by the UART driver.
With this fix, back-to-back open/close/open... will work as
expected, where before the second open would often fail since
the UART was not actually disabled yet.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Remove ifdef around `srcs` and let linker exclude it when Opcode
Aggregator Client model is not enabled.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
If the bonding information has been cleared before pairing had a chance
to complete (probably by the application), indicate this by setting an
appropriate log message.
Also check that keys exist before calling `bt_keys_store`.
Fixes#59788 and #61465
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This fixes bt_audio_codec_cfg_get_chan_allocation_val return value that
shall be 0 in case of success.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes data pointer that was never set because wrong pointer
assignment.
It's regression introduced in:
b4af917ad0
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Use NRF_CCM HEADERMASK register to use correct Additional
Authentication Data (AAD) from ISO PDU header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix an issue in the CCC configuration when the Peripheral device
maintains two or more distinct connections on different identities
with the same peer. The issue occurs when the local device performs
the pairing and the bonding procedure on a connection associated
with one of the Bluetooth identities. During the identity resolution,
the peer address field in the CCC descriptor is converted from the
RPA-type address to the Identity Address. However, the destination
address on the remaining connection objects associated with other
Bluetooth identities is not converted. Due to this, their CCC
configuration is reset and GATT indications and notification fail
to be sent even if the Central device subscribed to them.
Added necessary code to iterate over all connection objects during
the identity resolution phase and aligned their destination address
from the RPA-type to the Identity Address.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Fix timestamp calculation to use CIS reference anchor point
instead of incorrectly used CIG reference anchor point.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
NVS lookup cache currently uses CRC8/16 as a hash function
to determine the cache position, which is not ideal choice.
For example, when NVS lookup cache size is 512 and 256
subsequent NVS IDs are written (that is, 0, 1.., 255), this
results in 128 cache collisions.
It is better to use a dedicated integer hash function. This
PR uses one of the 16-bit integer hash functions discovered
with https://github.com/skeeto/hash-prospector project. The
hash function was additionally tested in the context of NVS
lookup cache using simple NVS ID allocation patterns as well
as using real device NVS dump.
Also, add a test case to verify that the hash function is
not extremely bad.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Add TI VIM (Vectored Interrupt Manager) interrupt controller support.
VIM is a TI specific custom interrupt controller for ARM cores.
In J721E soc, VIM aggregates interrupts to Cortex R5 cores.
TRM for J721e https://www.ti.com/lit/zip/spruil1
File: spruil1c.pdf
VIM: section 6.3.3.6
Signed-off-by: Prashanth S <slpp95prashanth@yahoo.com>
Modify the signature of the k_mem_slab_free() function with a new one,
replacing the old void **mem with void *mem as a parameter.
The following function:
void k_mem_slab_free(struct k_mem_slab *slab, void **mem);
has the wrong signature. mem is only used as a regular pointer, so there
is no need to use a double-pointer. The correct signature should be:
void k_mem_slab_free(struct k_mem_slab *slab, void *mem);
The issue with the current signature, although functional, is that it is
extremely confusing. I myself, a veteran Zephyr developer, was confused
by this parameter when looking at it recently.
All in-tree uses of the function have been adapted.
Fixes#61888.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Modify when the BT_BAP_EP_STATE_ENABLING state is set during
bt_bap_broadcast_source_start.
The reason why the state is now set before the call to
bt_iso_big_create, is to handle the case where the BIG
created event actually happens and is handled (by another
thread) faster than the state change is done, which could
cause an invalid state check if the streaming state is
attempted to be set before the enabling state.
Since the events from the controller may be handled by a
different thread, we should not assume that this function returns
before the event is handled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The application gets notified about both valid and invalid data.
As data arrives every SDU interval, we would like to only print the
valid data to avoid the shell being flooded with logs.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
For flash device, littlefs should be located at the partition.
Current implementation of the fs shell is hardcoded for the flash device
and the compilation fails if STORAGE_PARTITION isn't defined in the
device tree.
Add options for block dev support. This allows to mount littlefs on the
block device from the shell, and also removes the compile time
dependency on STORAGE_PARTITION, if CONFIG_FS_LITTLEFS_BLK_DEV is set.
Fix mounting of littlefs blk device. lfs_mount stucks in case when the
read/prog buffer less than SDMMC block size, because it can cause memory
corrupt, for example, look into function 'card_read_blocks' how it writes
data to read buffer in case when buffer isn't aligned. With default
config we have 32 bytes in the read buffer but trying to write
'block_size' to it and get memory corrupt, the same issue will be in
case when the read buffer is aligned.
This is an incremental improvement, ideally, someone should implement
selection of the storage dev from the shell args.
Co-authored-by: Mykola Kvach <mykola_kvach@epam.com>
Signed-off-by: Dmytro Semenets <dmytro_semenets@epam.com>
This utility header was accessing directly the interrupt
controller HW models, but those are not an interface one
can expect to not change, or to be avaliable in different
targets.
Instead we change it to use the APIs we have a contract
about, that is, the ones all POSIX arch boards are
expected to provide.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename BT_AUDIO_CODEC_QOS_[UN]FRAMED to
BT_AUDIO_CODEC_QOS_FRAMING_[UN]FRAMED and give a name
to the enum, which is then used by the
struct bt_audio_codec_qos.
The rename was needed as we had a codec_qos initializer of the
same name, so the values were renamed to avoid duplicated
macro names.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If network interface name support is enabled, print the name
when showing network interface data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure we use the network interface name (if configured)
instead of device name when binding to certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_NET_INTERFACE_NAME is enabled (default is y), then
system will automatically set a user friendly name to the network
interface like eth0, wlan0 etc.
Application can change the interface name if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix few mismatched CONTAINER_OF, few missing pointers to the first
element, one explicit casting.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add option to prefix log message with thread ID or thread name.
Align tests and add test case to the log_output test.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add Kconfig LOG_THREAD_ID_PREFIX option which allows storing
thread id in the log message and process it as message prefix
(as id or thread name).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Fix incorrect use of Max_SDU_Size and SDU_Interval parameters in
ISO Transmit Test Mode code.
Fixes EBQ test LL/CIS/PER/BV-08-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This changes bt_audio_codec_cfg_get_val function to return the data
length found. Otherwise, this function gives no information about the
returned data length.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fix few mismatched CONTAINER_OF, one missing k_work_delayable_from_work
and few that should be pointing at the first elemnet.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The twt and ps helper functions were not namespaced (were missing
wifi_ prefix).
Also change wifi_get_twt_... to more logical wifi_twt_get...
like the other twt prefixed functions and wifi_get_ps... to
wifi_ps_get... like the other ps prefixed functions.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Clean up sizes of some SD data fields, as the max value of these fields
is limited by the SD specification
Specifically, the limits are as follows:
num_io: 0-7, 3 bits (SDIO only)
relative_addr: 16 bits (SDMMC/MMC)
block_size: 12 bits (Max of 2KB, uint16_t used)
sd_version: 8 bits (currently at version 3)
card_speed: 8 bits (could potentially be reduced in size)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Makes img_mgmt_slot_to_image image number independent and moves
it to header file as static inline.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The erase logic has been switched to using img_mgmt_get_opposite_slot
and the img_mgmt_get_other_slot has been removed.
The commit adds CONFIG_MCUMGR_GRP_IMG_ALLOW_ERASE_PENDING Kconfig
options, default set to n, that allows to make pending slot
erasable. The option only allows erase on pending slot that
is not revert slot.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Make img_mgmt_active_slot independent from
CONFIG_MCUMGR_GRP_IMG_UPDATABLE_IMAGE_NUMBER for MCUboot swap type
algorithms.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit modifies image list command operations to use
img_mgmt_get_next_boot_slot instead of directly relying of
MCUboot flags.
The function is now used, also, by img_mgmt_slot_in_use to
figure out whether queried slot is in use.
The commit introduces two new Kconfig options
MCUMGR_GRP_IMG_ALLOW_CONFIRM_NON_ACTIVE_IMAGE_SECONDARY
MCUMGR_GRP_IMG_ALLOW_CONFIRM_NON_ACTIVE_IMAGE_ANY
that allow users to enable confirming non-active images slots.
The MCUMGR_GRP_IMG_ALLOW_CONFIRM_NON_ACTIVE_IMAGE_SECONDARY is y
by default to keep original behavior of logic that accidentally
allowed confirming secondary slot.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds functions:
img_mgmt_get_next_boot_slot
img_mgmt_get_opposite_slot
to simplify obtaining information on next boot slot.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added optional support for read ISO link quality command.
Added link quality member in struct ll_iso_stream_hdr.
Signed-off-by: Mads Winther-Jensen <mdwt@demant.com>
If there are duplicate handles the Controller shall return the
error code Invalid HCI Command Parameters (0x12)
Fixes a failure in the EBQ test LE/AdvExt/Req-01 (part of the Ellisys
quality test suite)
Signed-off-by: Troels Nilsson <trnn@demant.com>
currently when no enough memory is found a (1 << (-1)) value is returned
instead of 0.
Fix this by returning 0 and simplify log2 computation
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Fixes some incorrect assertions in ull_adv.c on connection establishment
Note that the usual checks using adv->lll.conn doesn't work here,
since ull_periph_setup() NULLs the lll's conn structure pointer
before stopping the ticker
Signed-off-by: Troels Nilsson <trnn@demant.com>
This PR adds the following modem modules to the subsys/modem
folder:
- chat: Light implementation of the Linux chat program, used to
send and receive text based commands statically created
scripts.
- cmux: Implementation of the CMUX protocol
- pipe: Thread-safe async data-in/data-out binding layer between
modem modules.
- ppp: Implementation of the PPP protocol, binding the Zephyr PPP
L2 stack with the data-in/data-out pipe.
These modules use the abstract pipes to communicate between each
other. To bind them with the hardware, the following backends
are provided:
- TTY: modem pipe <-> POSIX TTY file
- UART: modem pipe <-> UART, async and ISR APIs supported
The backends are used to abstract away the physical layer, UART,
TTY, IPC, I2C, SPI etc, to a modem modules friendly pipe.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Ensure card CSD and CID variables are initialized in sd_ops functions
for reading card CSD and CID data.
Fixes#59562
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add TLS_DTLS_CID socket option, which enables to use the Connection ID
extension for the DTLS session.
The option provides control of the use of CID with the `setsockopt()`
function. The value provided can disable, enable, and control whether to
provide a CID to the peer. It uses a random self CID (if told to provide
one to the peer) unless TLS_DTLS_CID_VALUE set previously.
Add TLS_DTLS_CID_VALUE to get or set the CID sent to the peer, if any.
Add TLS_DTLS_PEER_CID_VALUE to get the CID value provided by the peer,
if any.
Add TLS_DTLS_CID_STATUS to determine if CID used, and whether
bidirectional or one way.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
bt_l2cap_chan_send_sdu previously returned the number of bytes sent
in the last sent sdu buf fragment or 0 if the buf has only
one fragment. bt_l2cap_chan_send_sdu now returns the total data
bytes sent from the buf.
Signed-off-by: Tom Finet <tom.codeninja@gmail.com>
Fix a bunch of mismatched CONTAINER_OF, few missing
k_work_delayable_from_work conversions but also many
bt_l2cap_le_chan/bt_l2cap_chan and few others.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
rp_enc_state_wait_ltk_reply() is executed in thread context, so
it is not allowed to move the encryption state machine forward.
Defer LTK reply handling to next prepare event by introducing a continue
state.
Update the unit test to reflect this, and remove the TODO that actually
said there was an issue in the first place.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Fix few mismatched CONTAINER_OF, few missing k_work_delayable_from_work
and a missing reference to the array first element.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Prevent compiler optimizations from changing the order of assignments in
the ticker API transactions. This could cause lost operation requests
and unexpected behavior under certain race conditions.
Signed-off-by: Morten Priess <mtpr@oticon.com>
There were a few issues in the way that PACS handled notifying:
1) A couple of dangling pointers (fixed by declaring some
`static const struct bt_uuid`
2) Some wrong Kconfig guards were used
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The use of private APIs z_add_timeout() and friends is not recommended.
With this commit, usual kernel timer APIs are used.
Fixes#61738
Signed-off-by: Martin Jäger <martin@libre.solar>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add a helper allowing connectivity implementations to more easily access
connectivity flags on connectivity bindings.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds conn_mgr_binding_lock/conn_mgr_binding_unlock, which connectivity
implementations can call to lock or unlock the passed in connectivity
binding.
This allows connectivity implementations to safely make direct accesses
to binding data from outside conn_mgr_conn_api callbacks, and should
allow cleaner, more robust connectivity implementations to be written.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Splits many definitions from conn_mgr_connectivity.h off into their own
header, conn_mgr_connectivity_impl.h
conn_mgr_connectivity.h now focuses solely on user/application-facing
APIs, and conn_mgr_connectivity_impl now contains all functions, utils,
definitions intended for use by connectivity implementations, including
conn_mgr_if_get_binding, which is now available for use by connectivity
implementations.
This lays the foundation for allowing connectivity implementations
easier and safer access to their internal state through internal APIs.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds a target RPA known unknown cache; it fulfills a similar function
to the existing peer RPA cache, used for scanning of directed
advertisements
Signed-off-by: Troels Nilsson <trnn@demant.com>
According to mesh 1.1 spec (4.4.1.2.2 Composition Data state):
“If the complete list of models does not fit in the Data field, the
element shall not be reported.“
The implementation of bt_mesh_comp_data_get_page_1 does
not consider this, and further it will assert the device if the passed
buffer is to small.
This commit adds a check that prevents populating passed buffer
if the full element entry wont fit in the buffer.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Remove the qos field from
bt_cap_unicast_audio_start_stream_param as it was not used.
The QOS values are set when creating the unicast group,
and not when starting the streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ZBus stores observers in two ways: statically using a list and dynamically
using a memory slab. Both present limitations. Static observers work only
for channel definition. The dynamic observers rely on a memory slab that
forces the user to manage its size to avoid issues with adding
observers. This commit fixes the static allocation problem by using the
iterable sections for allocating observation data and replacing the VDED
execution sequence since now it is possible to prioritize static observer
execution. All the runtime observers are dynamically allocated on the heap
instead of a specific memory pool.
BREAK changes (only internal, not APIs):
* ZBus channel metadata changed. Remove the observers' static array
pointer. Rename the `runtime_observers` pointer to `observers`. Add
`observer_start_idx` and `observer_end_idx`;
* Change the VDED execution sequence. The position (on definition time),
the priority in conjunction with the lexical order, is considered for
static post-definition time observers. At last, the runtime observer
follows the adding sequence;
* Replace the `CONFIG_ZBUS_RUNTIME_OBSERVERS_POOL_SIZE` with
`CONFIG_ZBUS_RUNTIME_OBSERVERS`.
New APIs:
* New iterable section iterators (for channels and observers) can now
receive a user_data pointer to keep context between the function calls;
* New `ZBUS_LISTENER_DEFINE_WITH_ENABLE(_name, _cb, _enable)` and
`ZBUS_SUBSCRIBER_DEFINE_WITH_ENABLE(_name, _queue_size, enable)` that
enable developers define disabled observers. They need to be enabled
during runtime to receive notifications from the bus;
* `ZBUS_CHAN_ADD_OBS` macro for adding post-definition static observers of
a channel.
Important changes:
* Move the ZBus LD file content to the `common-ram.ld` LD file. That was
necessary to make ZBus compatible with some Xtensa and RISCV boards.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Drop few redeclared variables, fixes some:
settings_mgmt.c:454:30: error: declaration of ok shadows a previous
local [-Werror=shadow]
454 | bool ok;
| ^~
settings_mgmt.c:436:14: note: shadowed declaration is here
436 | bool ok = true;
| ^~
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Refactor the bt_audio_codec_cfg to use flat arrays to store
metadata and codec specific configurations.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a BSIM tests for PACS notification functionality. This test
tests that all optional notifies are working, as well as verifying
that a disconnected subscribed client will be notified on reconnect.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
This fix allows PACS to notify bonded clients, that were disconnected
when a characteristic with notify property was changed, are being
reconnected.
This fix also implements a defer work so to not block the bt rx
thread during auth callbacks. All other notify calls are for
consistency and style also moved to use the defer work.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Added Kconfig options to make the various PACS characteristics that are
optionally notifiable selectable as notifiable. Selecting a
characteristic as notifiable will make it so for all pacs instance on
the device.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add a a new source coverage for native builds
and new kconfig choice of COVERAGE mode to select which:
* COVERAGE_NATIVE_GCOV: what we had until now with native builds
* COVERAGE_NATIVE_SOURCE: a new LLVM source coverage mode
* COVERAGE_GCOV: the old COVERAGE_GCOV (embedded gcov data generation).
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix few instances of delayable work handlers using the k_work pointer
directly in a CONTAINER_OF pointing to a k_work_delayable.
This is harmless since the k_work is the first element in
k_work_delayable, but using k_work_delayable_from_work is the right way
of handling it.
Change a couple of explicit CONTAINER_OF doing the same work as the
macro in the process.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This change allows to register additional handlers for ICMPv6 so the
user can handle some of the messages between they are handled by the
ICMPv6 module in Zephyr by returning NET_CONTINUE.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
There was a corner case which was not handled well in a scenario, when
listening socket was closed during an active handshake with a new
client.
When a listening socket is closed, the accept callback is cleared on the
TCP context. If this happened during a handshake with a new client, i.
e. before final ACK from the client was processed, this lead to a
context leak, as application did not take ownership of the connection
(i. e. had no means to close it).
Fix this, by proactively closing the connection at the TCP level when no
accept_cb is available. Instead of ignoring the fact that no accept_cb
is available, the TCP stack will now enter TCP_FIN_WAIT_1 state and
proceed with a graceful teardown of the connection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
getsockname() did not work properly on bound sockets, as it verified
whether the socket has an active connection before retuning result. This
is not correct, as socket after bound may not have a connection yet.
Fix this, by verifying that local_addr on an underlying net_context is
set, to determine whether socket has a local address assigned, before
returning result.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds SoC and board configs to support the dc233c core
that is available on QEMU. This core has more features than
sample_controller, such as MMU support.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
* Renamed 'coap_client_init_path_options' to
'coap_packet_set_path'
* Moved into 'coap.c'
* The function is public now
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Fix options initialization for path and query
when a final segment is one character long.
For example, "a/b" inits path as ["a"] instead
of expected ["a", "b"]. The same applies to
query option. The "a/abc?a&b" options won't
contain "b".
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Adds a settings management group to MCUmgr which allows for
manipulation of the zephyr settings from a remote device.
Includes callback hooks to secure access from an application.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
net_iface_status is larger than scan_result, causing
net_iface events to be dropped due to info exceeding
NET_EVENT_INFO_MAX_SIZE.
Signed-off-by: Noah Luskey <LuskeyNoah@gmail.com>
The previous patch to address race condition on STREAM sockets had a
side effect on DGRAM socket, where net_context_recv() is not only
installing recv callback, but also registering a connection at net_conn
level. Doing so before setting remote address first (which is done in
net_context_connect()) had an impact on the connected DGRAM socket
operation, which now accepted packets from any remote peer, and not only
the one socket was connected to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ICMPv6 messages with type < 128 are error messages, where we should not
send back another error. The meaning of the code depends on the type.
Signed-off-by: Andreas Müller <andreas.mueller@husqvarnagroup.com>
When resource data length is set to zero, we still need to
ensure that string reading will return an empty string.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Will exclude the code for prefix and checksum functionality if none
of the entries on a device make use of these features, saves ~816
bytes when both features are excluded.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
CONFIG_COVERAGE has been incorrectly used to
change other kconfig options (stack sizes, etc)
code defaults, as well as some samples behaviour,
which should not have dependend on it.
Instead those should have depended on COVERAGE_GCOV,
which, being the one which adds special code and
temporary RAM storage for embedded targets,
require changes to many features.
When building for the native targets, all this was
unnecessary.
=> Fix the dependency.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MCUmgr client upload max data payload length was missing
Transport layer CRC + 16bit lenght. Full net buf packet was
possible to send but receiver side it was blocked because there
was not space for calculate CRC and length.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Retry sending notification was not sent due to e.g. lack of
buffers currently available.
Fixes: #57456
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Retry sending notification was not sent due to e.g.
lack of buffers currently available.
Fixes: #57452
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Changed Add to Enable in help text to convey the intended use of the
Kconfig NET_L2_WIFI_MGMT.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add a scan command option to print the help text for the scan command.
This is to facilitate ease of using the command (since now there are
many different options added to the scan command).
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add scan extension to allow limiting the scanning to specific channels.
Only 20 MHz channel specifications are allowed presently.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add scan extension to allow limiting the scan results to a user defined
maximum number. This parameter is intended to return results with the
best RSSI. It cannot be counted upon to limit the scan times since the
Wi-Fi chips might have to scan all the channels to find APs with the
best RSSI values across all channels.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add scan extension to control scanning time spent on channels where
passive scanning is used.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Added scan extension to support scanning individual Wi-Fi bands or
combinations thereof.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Modify the way the scan type option is passed to the wifi scan command.
This makes it flexible to add more scan options.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
This fixes missing Fix bt_tbs_client_cb.discover call that has been
observed when CONFIG_BT_TBS_CLIENT_CCID was disabled. In such case the
discovery proces was not finished from application point of view,
as the callback was not called.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes odd `subscribe` parameter from bt_tbs_client_discover
function parameters list. As the API user enables specific
CONFIG_BT_TBS_CLIENT_* option, the client implementation should
subscribe to the characteristic notifications so that the user receives
the value updates.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
- Fix masking for no coded phy
- Allow ISO_Interval < SDU_Interval for framed mode
- Change BT_HCI_ERR_INSUFFICIENT_RESOURCES to
BT_HCI_ERR_CONN_LIMIT_EXCEEDED.
- Prevent starting same CIS twice
- Cancel an initiated CIS creation procedure if terminated before
sending CIS_IND.
- Implement canceling of local CC procedure. Respond to CIS_RSP with
REJECT, if canceled after CIS_REQ was sent.
- Introduce state CIG_STATE_INITIATING for central, to keep track of
initiating CIS connection, in transition between CONFIGURABLE and
ACTIVE.
Fixes EBQ test /HCI/CIS/BC-03-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This fixes the error below:
main.c: In function ‘bt_mesh_provision’:
main.c:173:17: error: ‘node’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
173 | bt_mesh_cdb_node_del(node, true);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
With gcc from the zephyr sdk and -Wold-style-declaration is giving this
output:
zephyr/arch/arm/core/aarch32/cortex_a_r/fault.c:101:1: warning:
'inline' is not at beginning of declaration [-Wold-style-declaration]
101 | static void ALWAYS_INLINE
z_arm_fpu_caller_save(struct __fpu_sf *fpu)
| ^~~~~~
I searched to all of the source code to find these further occurances
where inline is not at the beginning of a function declaration.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
The bt_cap_initiator_started may be called in cap_stream_started_cb,
even if there is no unicast support. Added a guard for
CONFIG_BT_BAP_UNICAST to avoid calling an unlinked function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename shadow variables found by -Wshadow
After e38fc6de8a
was merged, this cause CI failures.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This enables -Wshadow to warn about shadow variables on
in tree code under arch/, boards/, drivers/, kernel/,
lib/, soc/, and subsys/.
Note that this does not enable it globally because
out-of-tree modules will probably take some time to fix
(or not at all depending on the project), and it would be
great to avoid introduction of any new shadow variables
in the meantime.
Also note that this tries to be done in a minimally
invasive way so it is easy to revert when we enable
-Wshadow globally. Source files under modules/, samples/
and tests/ are currently excluded because there does not
seem to be a trivial way to add -Wshadow there without
going through all CMakeLists.txt to add the option
(as there are 1000+ files to change).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are a few structs, unions, and enums where -Wshadow would
complain. Since names being the same are intentional, we need
to tell compiler to ignore -Wshadow for those names.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When the application closes the connection, it enters the FIN1 state.
Restructure this sequence to RST on data received after the application
has closed the socket.
Next to that deal with packets that contain both data and a FIN flag.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
As the metadata has to be validated anyway, let the initial vaidation of
metadata to be done in ASCS. The application can still reject the
metadata, but the length validation and supported type validation can be
performed by the stack.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The `ioctl()` interface is already supported by the network
subsystem but there was no `zsock_` interface available for it.
Add the `zsock_ioctl()` syscall.
Implement two somewhat commont ioctl requests for socket
file descriptors; namely
- `FIONBIO` set non-blocking I/O mode
- `FIONREAD` get the number of available bytes
In the process, added `net_pkt_ip_proto_hdr_len()`
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
In order to get a semi-accurate assessment of how many
bytes are available on a socket prior to performing a read,
BSD and POSIX systems have typically used
`ioctl(fd, FIONREAD, &avail)`
We can support this in Zephyr as well with little effort, so
add support for `socketpair()` sockets as an example.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Previously, if a net_context had multiple packets already in
the receive queue, and a call to zsock_recvfrom() was made with
a buffer large enough to receive content from multiple packets,
only the content from a single receive buffer would be received.
Since zsock_recvfrom() is a system call, which has a
non-negligible overhead, it makes sense to receive as many bytes
as possible per system call.
Add zsock_recv_stream_immediate() as a shorthand for
"fill this receive buffer with as many bytes as possible without
blocking". Allow nullable buffer parameters so that we can also
have a shorthand for "count how many bytes are immediately
available".
With minor refactoring, zsock_recv_stream_timed() is a simple
wrapper around zsock_recv_stream_immediate() that handles timing
and error conditions.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
When using the JIT scheduler (CONFIG_BT_CTLR_JIT_SCHEDULING), doing
ticker updates which only change the slot reservation, will fail.
For compatibility, the updates to ull.ticks_slot are preserved, as some
link layer implementations use this to predict collisions.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When executing a local CIS_TERMINATE procedure, the reason sent to the
host must be changed to match the perspective of the initiator.
According to BT Core 5.4 Vol 4, Part E, section 7.1.6, the disconnect
reason must be BT_HCI_ERR_LOCALHOST_TERM_CONN for a local disconnect.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Do not assert in case of race conditions or asymmetric CIS
create/release. There are cases where ll_conn_iso_stream_get_by_group
legally returns NULL, and this should just cause for-loop continuing to
next iteration.
Signed-off-by: Morten Priess <mtpr@oticon.com>
To keep track of requested/pending CIS LLL flushing, change 'flushed'
binary state to 'flush' with states NONE, PENDING and COMPLETE.
This enables CIS teardown to know that a CIS already has a pending LLL
flush, and ULL does not need to initiate it.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add support for SPI host command backend for STM32 chips family.
Unfortunately, the current SPI API can't be used to handle the host
commands communication. The main issues are unknown command size sent
by the host(the SPI transaction sends/receives specific number of bytes)
and need to constant sending status byte(the SPI module is enabled and
disabled per transaction). Thus the SPI backend includes basic SPI STM32
driver adjusted to host command specification.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
While the maximum sizes were already correctly checked by the code, the
minimum sizes of the PDUs were not. This meant that PDUs smaller than
the minimum required length (typically 6 bytes for AdvA) were
incorrectly forwarded up to the Host.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Set correct SHELL_BACKEND_SERIAL_INIT_PRIORITY if ACPI is enabled.
Otherwise when enabling SHELL using menuconfig, etc serial backend is
not working.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds separate extended protocol timeout of 120 sec in provisioning
implementation when OOB method Input or Output is used. This
complies with recommendation in the mesh 1.1 protocol spec (5.4.4).
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This is a stable API treewide change changing the newly introduced
"ret" response to "err" as it was overlooked that the shell_mgmt
group already used "ret" to return the exit code of the command
and this created a collision. Since SMP version 2 was only recently
introduced, there should not be any public implementations of it
as of yet, but the original function has been kept and marked as
deprecated.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes a stray ifdef which causes a build failure if the automatic
UDP start Kconfig is not enabled.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When calling `bt_iso_chan_disconnect()` while the channel is
connecting, the host should simply use HCI Disconnect.
Note: For the peripheral it is not allowed to call HCI Disconnect
on a CIS after it has accepted the CIS request, but before it has
received the CIS established event. The implementation in this
commit does not fix this case. In that case the controller will
return an error code.
Also, this commit does not handle the events following the
HCI Disconnect correctly.
In this particular case, two events are raised by the controller.
See Core_v5.4, Vol 6, Part D, Figure 6.51.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The default stack size is too small on 64bit.
Some standard shell commands cause stack overflow
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Both options are kind of mutually exclusive and can't be used together.
Also, USE_IDENTITY is used for debug purpose and could be useful when
debugging Private Proxy as well. Since CONFIG_BT_MESH_DEBUG_USE_ID_ADDR
is not allowed to be used in production, it is fine to use it for
Private Proxy advertisements as well.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Commit adds configuration for mesh with mbedtls PSA
to CI BabbleSim tests as well as emulation of
the Internal Trustable Storage(ITS) based on Zephyr's
settings to run in parallel environment.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Let's just let the user implementation to its things, like
checking, locking and stuff.
The tracing_user.c now just acts as a glue.
Moved previous implementation to its sample, and cleaned up
headers.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
When dealing with multiple connections in the shell as the central,
it is more often than not the newest connection you want
to interact with.
The behavior for the peripheral remains unchanged.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes ASE state transition to QoS Configured state that shall be
done autononously when CIS has been terminated due to link loss.
As per ASCS v1.0:
"If the server detects link loss of a CIS for an ASE in the Streaming
state or the Disabling state, the server shall immediately transition
that ASE to the QoS Configured state. Link loss of a CIS for an ASE in
any state other than Streaming or Disabling shall not cause a
transition of the ASE state machine."
Fixes: #60669
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The added function allows to check if a descriptive block
option was already added to a message.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
In some cases the options of a CoAP message are reused for
block transfer. Then the block header needs to be updated.
The current approach is to remove the old block option and
add an updated one.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
The provided function allows to remove a CoAP option in a
message. This is useful for reusing parts of a message.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
A recent refactor of bt_audio_codec_cap to flat arrays missed setting
data_len and meta_len fields.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
The reply callback doesn't need to handle the case when the
code of the reply is 'continue' (2.31). In that case the callback
is not executed until the last block is transmitted.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
When using block-wise transfer, call the reply callback only when
the last block arrived.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
Fix possible race conditions when state and results are written
by locking the registry, so a first write does not cause Notify
message to be send too early.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When the protocol layer like TCP is blocking transmission, the socket
layer will attempt and wait for a maximum amount of time before returning
with an ENOBUFS error.
This change allows to set the maximum waiting time from the configuration
file instead of using a fixed 10 second value.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Qualification test CSIS/SR/SP/BV-03-C [Lock Timeout]
Specification: Coordinated Set Identification Service Revision v1.0.1
Section 5.3.1.1.
When the server and the client are not bonded and they disconnect when
the value of the Set Member Lock characteristic is set to Locked, the
server shall set the value of the Set Member Lock characteristic to
Unlocked immediately after the disconnection.
Signed-off-by: Henrik Eriksen <heri@demant.com>
Qualification test MICS/SR/SPE/BI-01-C [Invalid Mute Value]
Specification: Microphone Control Service Revision v1.0 Section 3.1.1
If the client writes a value of Disabled or RFU to the Mute
characteristic, the server shall return an ATT Error Response with the
ATT error code Value Not Allowed (0x13) as defined in Assigned Numbers.
Signed-off-by: Henrik Eriksen <heri@demant.com>
Bootstrap executable cause socket to be closed, so
it requires some delay for Ack to be send out as well.
Similarly, add small delay for Update trigger, so the
possible Ack goes out before the actual update message.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When BOOTSTRAP FINNISH message was received, it caused
engine to immediately switch to BOOTSTRAP_TRANS_DONE state
which then closed the connection.
Ack packet was still on the send-queue so it never got send before close().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Some state changes were do by directly writing into
client.engine_state variable, followed by call next_event_at(0);
This causes hard-to-find side effects.
Refactor all state transitions to use set_sm_state() to have better
control for it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The command did no longer set the user specified data if the user
specified more than 1 AD field.
We were using the return value of ad_init() to set the number
of AD fields. This did not take into account the number of
existing data fields. By chance this usually returned 1.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
In case a TCP connection should be established with a specific source
IP address (e.g., by calling bind() prior to connect() on the socket),
we have to actually place the address in the outgoing packet.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
To prevent failure stopping a ticker node after starting it within the
same ticker_job execution (queued operations), defer the stopping until
after start. This will sequence the operations correctly and prevent
failures.
Signed-off-by: Morten Priess <mtpr@oticon.com>
For config CONFIG_BT_CTLR_CONN_ISO_RELIABILITY_POLICY, set
CIG_Sync_Delay fixed as high as possible, and calculate FT by iteration.
This favors utilizing as much as possible of the Max_Transport_latency,
and spreads out payloads over multiple CIS events (if necessary).
Add exit with cleanup as ll_cig_parameters_commit may fail after
creating new CIG/CIS instances.
Fixes issue #59605.
Fixes EBQ test HCI/CIS/BI-12-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Convert the ISO-TP SF length check in send_sf() from __ASSERT() to a
runtime check.
Fixes: #61501
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
There is no reason why the capabilities
should be modified by the stack after registration,
nor any reason why a the unicast client application
needs to modify the reported remote capabilities, so
all have been marked as const.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cap to use flat arrays to store
metadata and codec specific capabilities.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec capabilities.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds refactor of bt_vocs object that is common interface for client
and server commands. As the bt_vocs_client is significantly larger than
bt_vocs_server the memory usage is not optimized when bt_vocs has an
union of those. Thus RAM consumption has been minimized by using
CONTAINER_OF macro to reference either to bt_vocs_client or
bt_vocs_server instance that bt_vocs is a member of.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The VOCS API uses `bt_vocs` object to reference both client and server
instance. This adds missing instance type checks to avoid invalid API
usage.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When settings_load() is not called from system workqueue, but still
called from a cooperative thread, rescheduling during the settings
loading can wake up system workqueue and try to register the Mesh
Proxy Service, which can not be allowed yet. This is the case for bsim
tests.
Postpone registering the service with some small timeout.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This fixes possible buffer overflow that may happen when `buf->len`
equals `buf->size` while adding null terminator.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The font existence is checked at the time of linking,
The check at initialization is no longer necessary.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
According to section 4.2.2.4, Compositiion Data page 128 shall be
present if the node supports Remote Provisioning Server (section
4.2.2.4).
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
According to sections 7.2.2.2.4 and 7.2.2.2.5 of MshPRTd1.1v20,
when starting Private Node Identity or Private Network Identity, the
node shall use either RPA or NRPA and the advertising address. The
address shall be regenerated when Random field is regenerated.
Use BT_LE_ADV_OPT_USE_NRPA options to make advertiser generate and use
NRPA on every start of advertising Private Node Identity or Private
Network Identity.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This removes the scanning and PA sync capabilities from the
broadcast sink implementation, moving the responsibility of this
to the application layer.
The reason for this is to add more flexibility and choice to the
upper layers, while simplifying the Broadcast Sink implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink scan API is no longer used by the BAP
shell, which handles everything related to PA sync and scan
itself now.
It has also been made easier to sync to a broadcast
source by simply using create_broadcast_sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for selecting a periodic advertising
sync object for use. This will also be available outside
the scope of bt.c via the extern declaration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes a race condition that could occur if the TX queue was read out
before iso_has_ts was set. In that case, the provided buffer is of
wrong length.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This fixes return error from notify_cb function that was never set up.
As the result, the functions like bt_gatt_notify_cb and bt_gatt_indicate
returned invalid error when failed to send notification.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Looking back at the current INPUT_LISTENER_CB_DEFINE api naming, it
feels like it's a bit overloaded. Rename it to a simpler
INPUT_CALLBACK_DEFINE.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There are some calls to ull_adv_aux_pdu_set_clear that are set to 0
but the argument is actually unsigned. This PR replaces the '0'
with '0U'
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Remove the shadowing ret variable and fix a bug that was related to
its existence - the shadowing ret variable was assigned with -ETIMEDOUT
which was supposed to be retuned by the function, but was not because
the ret variable at the function scope was left intact.
Also remove the unneded goto unlock; jump (assigning the error code is
the last operation before unlocking the mutex anyway).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This fixes 3 issues that came within PR #59124 for ppp uart usage.
Earlier start/stop of ppp was done at enable() but that
was removed in PR #59124. Now putting enable/disable() back and
putting start/stop there.
Additionally, there was a double ppp carrier ON when NET_EVENT_IF_DOWN.
For that net_if_carrier_on/off is set in uart ppp.c driver.
Also, maybe worth to be mentioned that after PR #59124 there is no
ppp carrier off when lcp is disconnected, for workaround that change,
application should use ppp dead/running events.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
When a thread is preempted on ARC, caller-saved registers
are saved on the stack automatically (RIRQ) or manually
by the kernel ISR (FIRQ).
Exposing the thread's relinquish cause hints the debugger
that it can read more or less register values.
Signed-off-by: Bruno Mendes <bd_mendes@outlook.com>
The OP_AGG_SRV is dependent that the OP_AGG_CLI is add
for the OP_AGG_SRV to work. Moved the define of OP_AGG_CLI
so it will call op_agg_send without the OP_AGG_CLI.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The call to metadata-encode call in code and documentation
does does not match. Because the shell call in the documentation
looks correct the shell call in the code has been changed by
removeing the double metadata request.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Flaky tests give innacurate test summary indicating a misleading
passing test suite. Add new status for flaky tests.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
First implementation had a math error where the offset would be the
remainder from division (modulo). It should have been an ISO interval
minus the remainder. Refactored to not use modulo.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fixes a coverity-reported issue by explicitly ignoring the return value
of the cas-operation. The return value is the old value, but we are not
interested in it in the situation when we just want to initialize a
value if it is in the uninitialized state.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/60474
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
In certain scenarios, the semaphore sem_ticker_api_cb may be taken
during attempt to complete a synchronous ticker operation such as start
or stop, but is never released via ull_ticker_status_give. This could
happen if ticker temporarily runs out of ticker operation slots for any
ticker client.
The consequence of ULL stuck waiting in semaphore is anything from
allocation assertions to watchdog timeouts.
This commit also sets a timeout on ull_disable calls, which relies on
the disable callback being invoked from 'done'. Invocation of 'done' is
mandatory, and code shall not allow that not to happen, but to avoid
hiding the real cause, the semaphore now has a timeout which causes
assertion in the location the issue occurred.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Check mayfly_is_running() to determine use of blocking- or non-blocking
version of lll_csrand, instead of k_is_in_isr().
As mayflies run in ISR context for Nordic platform, change will have no
impact on Nordic configuration.
For vendors using META_IRQ mayflies, implementation will now prevent
blocking and reduce latencies and jitter in soft-realtime code.
Signed-off-by: Morten Priess <mtpr@oticon.com>
dev_id is used as a pointer at the end of the call chain, so passing it
as an int makes no sense and can cause crashes if the pointer and int
types have different sizes. For example, if we have 64-bit pointers on
a board, the higher part of dev_id will be removed due to an type cast.
Signed-off-by: Mykyta Poturai <mykyta_poturai@epam.com>
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Updates NET_SOCKETS_TLS_MAX_APP_PROTOCOLS Kconfig option description to use
DTLS instead of DTL.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
* Create submenu for protocol versions.
Like LwM2M 1.0 vs 1.1. Object versions.
* Create submenu for engine features.
Containing all engine tweaks that are not directly from
protocol specification.
* Create submenu for all memory tuning options.
For example maximum number of certain objects, buffer
sizes, etc.
* Order all objects by object ID and show the ID in
title.
* When multiple options depend on same feature, group
them under if <option> ... endif. Preferably directly
after the selection itself.
* Move IPSO and uCIFI menuentries one sublevel up.
* Drop deprecated entries to bottom.
No functional changes, just clean up of Kconfig menu.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
At the moment, NET_EVENT_IPV6_PREFIX_ADD and NET_EVENT_IPV6_PREFIX_DEL
events provide provide information about an address without its length
and lifetime.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Fixes several minor display errors in the Segger SystemView output:
* Off-by-one error in some trace ids.
* Add missing syscall trace id.
* Displays easier to read syscall function names.
* Fixes syntax error in k_timer_start output.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Log transfer status and release transfer semaphore regardless if user
provided transfer completion callback or not. This fixes transfer slot
leak when transfer without callback completes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Using a different channel for responding to a request is forbidden by spec.
The allocator was especially flawed as it iterated over all the EATT
channels to find one w/ a big enough MTU, but the sending was still done
over the same channel as the REQ.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This to ensure we don't fail to send a response and never get an ATT
TIMEOUT due to ACL TX buffer starvation caused by other users of the stack.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The ATT module has provisions to queue a packet/buffer for sending later if
it can't send it right away. For example if the conn.c tx context
allocation fails.
This unfortunately doesn't work if the buffer can't get allocated in the
first place, or if the ATT metadata can't also be allocated.
The metadata is allocated from a global pool set to the same number as
conn.c TX contexts. That can lead to a situation where other users of ATT
manage to queue a bunch of buffers (e.g. the app spamming GATT
notifications), depleting the number of ATT metadata slots so that none are
available.
When none are available, and we receive an ATT REQ, we try to allocate one,
fail, and drop the buffer (!). That pretty much guarantees an ATT timeout.
As a workaround for this, use a per-channel metadata slot, that is only
used for completing transactions.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This is useful in multilink scenarios, especially since there is not user
callback when the ATT channel times out.
Adding a user-facing callback should ideally also be done, but just logging
the address already provides useful insight.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Easier to debug that way.
Ideally we'd have more error codes/logging instead of just returning
UNLIKELY for most errors.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
To allow insighed into the correct functioning of the collision avoidance,
log the internal values and function calls.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
To avoid a TCP connection from collapsing a link, implement a collision
avoidance algorithm. Initially TCP new Reno is implemented for its
simplicity.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Adds the force parameter to the reset command which is now
provided to the callback hook (if enabled).
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Uses the zcbor decode bulk function instead of manually parsing the
array in the function to reduce duplicated code.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Uses the zcbor decode bulk function instead of manually parsing the
array in the function to reduce duplicated code.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commits changes how data on the disk is accessed. There are disk
structures which are packed and their fields are stored in little endian
byte order. To use data in the program structures it has to be translated
from little endian to cpu endianness.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
- `ext2_file` and `ext2_dir` merged into one struct and allocated from
dedicated slab
- `ext2_inode` allocated from dedicated slab
- `ext2_disk_dentry` allocated from heap (because their size is not
constant)
- `ext2_bgroup` and `ext2_disk_superblock` statically allocated
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Fix the behavior when data should be written to storage device. Now all
writes are done directly to disk_access layer (where it might possibly
be cached).
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Added funtion that takes specified action when file system corruption is
detected. Possible actions are: do nothing, make mount point read-only,
panic.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Changes:
- Added few assertions to check if some assumptions are correct
- Fix removing blocks during trucate and inode removal
- Clear entry in inode table after inode has been removed
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Changes:
- Add fs::sync function
- Make correct file system in mkfs
- Add few assertions to ensure that all assumptions are correct
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Flaky tests give innacurate test summary indicating a misleading
passing test suite. Add new status for flaky tests.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
When a PAwR sync connects to a PAwR advertiser and CONFIG_BT_PRIVACY
is enabled a Resolvable Private Address will be used. Use that
as responder address instead of the identity address to match what
the central sees.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
The separate done memq was introduced to handle the old LLCP
stalling processing of the rx queue; This is no longer an issue with
the new LLCP, so we can remove it
Signed-off-by: Troels Nilsson <trnn@demant.com>
Upon receiving a L2CAP PDU, only send credits back if the L2CAP channel
hasn't been disconnected. The recv() callback called from
l2cap_chan_le_recv() can trigger a disconnect, which would cause an
assert failure when attempting to send credits back.
Signed-off-by: Donatien Garnier <donatien.garnier@blecon.net>
The PPP TX thread handles the transmission of packets at PPP layer.
Make it's priority configurable, so it's priority can be configured higher
then higher protocol layers.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The TCP work queue is handles all TCP transmission and maintenance tasks.
Make it's priority configurable, so it can be configured to a lower
priority than the lower level network layers to avoid it consuming all
net_bufs before handing over execution to the lower layer network layers.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Use 64bit timestamps from k_uptime_get() so they don't
roll over during the expected device lifetime.
Fixes#60826
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Engine now allows registering service callbacks that are
called only once on a given timestamp.
This allows tickless services to be developed.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow socket-loop to wake up immediately, if there are changes,
instead of waiting for zsock_poll() to timeout.
This change makes engine more reactive and removes
hard coded timeout from zsock_poll().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This fixes setting invalid List_Item_Length in Current Calls List.
The fix complements 9c7ef8e.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This was recently refactored (in #58440). But it introduced a bug in which
some channels were connected but not the whole list asked for by the peer.
In that case, `result` will not be `SUCCESS` but we still want to call the
`connected` callback as the peer will consider those channels to be
connected when we send the response.
The symptom is that EATT channels are being instantiated, but not
considered connected (ie. usable by the stack).
Also introduce a test that has asymmetric channel resources (5 on central
vs 2 on peripheral) to reproduce the bug.
Fixes#60212
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Make `bt_eatt_count()` return what it says on the tin, ie. the number of
channels that are actually connected.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When the target board does not have heap by default, allows
statically reserving the space for required socketpairs.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Likely this trigger of the send_data_timer was an alternative for the
function that has been filled in by the ZWP transmission.
At the moment this timer has the potential to cause spurious
retransmissions that can degrade the throughput of the network stack.
Second to that it can accelerate the retransmission process, quickly
running to the number of retransmissions, causing a connection failure.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Add support for setting advanced broadcast ISO parameters
using the ISO test commands. This allows the host to set
ISO parameters that the controller normally would handle.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for setting advanced unicast ISO parameters
using the ISO test commands. This allows the host to
set ISO parameters that the controller normally would
handle.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes an issue whereby the data packets were not checked to ensure
that the client has not attempted to write more data than the size
that was provided in the original upload packet.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes an issue whereby upload image size would not be checked in
the first packet of an upload, which would allow an image to be
uploaded until it reached the point of it being too large to
fit anymore.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
At any ack, the retransmission timer was cancelled. This means when an ACK
is only partially acknowledging pending data, followed by a packet loss,
the connection ended in a deadlock eventually timing out.
By checking if there is any pending data for transmission before canceling
the retransmission timer, there is no risk of this lock-up any more.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Nordic Semiconductor has been testing the feature extensively on its CI.
The tests includes the sample data and the PTS tests.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
It would be strange to enforce padding for other bus participants but not
use it yourself. This default suggests the likely proper usage, although
it is not a hard dependency
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
ISOTP_ENABLE_TX_PADDING makes the device transmit frames with TX padding.
ISOTP_REQUIRE_RX_PADDING ensures other devices on the bus use TX padding,
by rejecting non-padded RX frames
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
The IEEE 802.15.4 API and networking subsystem were using several
inconsistent timestamp resolutions and types. This change defines all
timestamps with nanosecond resolution and reduces the number of
available types to represent timestamps to two:
* `struct net_ptp_time` for PTP timestamps
* `net_time_t` for all other high resolution timestamps
All timestamps (including PTP timestamps) are now referred to a
"virtual" local network subsystem clock source based on the well-defined
types above. It is the responsibility of network subsystem L2/driver
implementations (notably Ethernet and IEEE 802.15.4 L2 stacks) to ensure
consistency of all timestamps and radio timer values exposed by the
driver API to such a network subsystem uptime reference clock
independent of internal implementation details.
The "virtual" network clock source may be implemented based on arbitrary
hardware peripherals (e.g. a coarse low power RTC counter during sleep
time plus a high resolution/high precision radio timer while receiving
or sending). Such implementation details must be hidden from API
clients, as if the driver used a single high resolution clock source
instead.
For IEEE 802.15.4, whenever timestamps refer to packet send or receive
times, they are measured when the end of the IEEE 802.15.4 SFD (message
timestamp point) is present at the local antenna (reference plane).
Due to its limited range of ~290 years, net_time_t timestamps (and
therefore net_pkt timestamps and times) must not be used to represent
absolute points in time referred to an external epoch independent of
system uptime (e.g. UTC, TAI, PTP, NTP, ...).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The usb_msc.h header does not provide any API. The content is only
used by the MSC implementation for the current USB device stack and
is not required for any use of MSC by the application.
The content has no proper namespace and must not be reused for
anything else in (new) USB support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
MCUmgr client basic implementation for support Image and OS grpup
commands.
Image Group:
* Image state read/write
* Image Upload secondary slot
* Image Erase secondary slot
OS group:
* Reset
* Echo service, disabled by default
Opeartion's are blocked call and cant't call inside worker queue.
IMG and OS need to be SMP client object for transport.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
SMP client support for generate request and handling
response message.
Updated SMP transport for send request.
Added API for register SMP transport.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
These configs are very tied to the BT_LL_SW_SPLIT implementation,
so it makes sense that these are only visible when that link layer is
used.
For the ones that may be used by other controllers in the future,
a dependency has been added.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Truncation of advertising data has to be done at a PDU
boundary; Including only part of a PDUs advertising data is
not allowed
Signed-off-by: Troels Nilsson <trnn@demant.com>
If the aux scanner already has CONFIG_BT_CTLR_SCAN_DATA_LEN_MAX
advertising data, there is no point in following an aux ptr -
instead flush the data and produce an incomplete report
Signed-off-by: Troels Nilsson <trnn@demant.com>
In some platforms it may be desirable to disable certain CPU power
states, for example, because they have extra requirements not available
on all boards/applications. Because `cpu-power-states` are defined at
SoC dts file levels, the only way to achieve that now was by re-defining
`cpu-power-states` property in e.g. a board file. With this patch, one
can now selectively set `status = "disabled";` to any power state and it
will be skipped by the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
pm_device_runtime_get() uses a semaphore to protect resources.
pm_device_runtime_get() blocked forever until obtaining the lock, making
it unusable from contexts where blocking is not allowed, e.g. ISRs. With
this patch, we give the chance to use the function from an ISR by not
waiting on the lock and returning -EWOULDBLOCK instead. If device is
suspending (from a previous put_async() operation) the same value is
returned as we can't wait either.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Effectively, this option changes code triple in device descriptor.
Although the name is misleading, renaming it would again lead
to negative user experiences. Instead, clarify what the option does
and always select it where it is required.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Uses the MCUboot bootutil image.h file directly instead of an
outdated copy which resides in the zephyr tree.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a helper function for initializing devices into the expected power
state, through the devices `pm_device_action_cb_t`. This eliminates code
duplication between the init functions and the PM callback.
The expected device states in order of priority are:
* No power applied to device, `OFF`
* `zephyr,pm-device-runtime-auto` enabled, `SUSPEND`
* Otherwise, `ACTIVE`
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add new net_if API functions which allow to loop over all valid
IPv4/IPv6 addresses assigned to the interface and execute a callback
function on them.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When parsing user input for "wifi connect" and "wifi ap enable"
commands, the SSID and PSK lengths were not verified. It's better to
detect invalid connect/AP enable parameters early, so that help text can
be printed, instead of letting wifi_mgmt command to fail.
For WIFI_SECURITY_TYPE_SAE, follow the Linux convention of limiting the
size to 128 bytes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some DHCPv4 servers do not respect BROADCAST flag set on DHCP Discover,
replying with unicast packet, making it impossible to obtain DHCP
address by Zephyr in such cases.
RFC1542 chapter 3.1.1 makes the following statement about the BROADCAST
flag:
This addition to the protocol is a workaround for old host
implementations. Such implementations SHOULD be modified so
that they may receive unicast BOOTREPLY messages, thus making
use of this workaround unnecessary. In general, the use of
this mechanism is discouraged.
Making it clear that being able to process unicast replies from the DHCP
server is not only an optional behavior, but a recommended solution.
Therefore, introduce a support for unicast DHCPv4 in Zephyr. To achieve
this, add additional filtering rule at the IPv4 level - in case DHCPv4
is enabled, there is an active query and the packet is destined for the
DHCPv4 module, let it through for the DHCPv4 module to process,
regardless of the destination IP address.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allows the application to force the use of an NRPA.
This is applied regardless of any other roles running (ie scanner) or
advertising type.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Increaing mesh scan window in order to reduce the number
of messages colliding into scan window end which happens
every 30ms currently. Increasing the window to 3000ms in
order to improve performance.
Keeping 30ms window only for legacy advertiser support.
Signed-off-by: Alperen Sener <alperen.sener@nordicsemi.no>
When copying parameters into payload buffer, it is possible
that after copying a string over, the pointer to buffer is
no longer aligned on 4 or 8 bytes. And some toolchains may
decide to treat the copy as aligned since the values being
copied are 4 or 8 bytes. This results in unaligned memory
access and hardware exception. So change the copy to memcpy
to avoid potential unaligned access.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The `attr_get` method is added to the ieee802154_radio to allow
reading of driver specific attributes of given device.
The enum `ieee802154_attr` provides common extension pattern
allowing to extend the attribute set.
Accessor function `ieee802154_radio_attr_get` is provided.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Adds a helper function for initializing devices into the expected power
state, through the devices `pm_device_action_cb_t`. This eliminates code
duplication between the init functions and the PM callback.
The expected device states in order of priority are:
* No power applied to device, `OFF`
* `zephyr,pm-device-runtime-auto` enabled, `SUSPEND`
* Otherwise, `ACTIVE`
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The initial goal was to remove sys_clock_timeout_end_calc(). However,
several related issues have been fixed as well.
First this:
int64_t print_interval = sys_clock_timeout_end_calc(K_SECONDS(1));
/* Print log every seconds */
int64_t print_info = print_interval - k_uptime_ticks();
if (print_info <= 0) {
[...]
}
The above condition will simply never be true.
Then there is lots of back-and-forth time conversions using expensive
base-10 divisions for each loop iterations which is likely to impact
performance.
Let's do the time conversion only once outside the loop and track
everything in terms of ticks within the loop. Also the various timeouts
are open-coded based on the absolute uptime tick so to sample it only
once per round. Using sys_timepoint_calc() and sys_timepoint_timeout()
would have introduced additional uptime tick sampling which implies the
overhead of a downstream lock each time for no gain. For those reasons,
open coding those timeouts bears more benefits in this particular case
compared to using the timepoint API.
Then this:
secs = k_ticks_to_ms_ceil32(loop_time) / 1000U;
usecs = k_ticks_to_us_ceil32(loop_time) - secs * USEC_PER_SEC;
The above should round down not up to work accurately. And the usecs
value will become garbage past 1.2 hour of runtime due to overflows.
And no need to clamp the wait period which is on the microsec scale
using the total duration argument being on the millisec scale. That's
yet more loop overhead that can be omitted. The actual duration is
recorded at the end anyway.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This is meant as a substitute for sys_clock_timeout_end_calc()
Current sys_clock_timeout_end_calc() usage opens up many bug
possibilities due to the actual timeout evaluation's open-coded nature.
Issue ##50611 is one example.
- Some users store the returned value in a signed variable, others in
an unsigned one, making the comparison with UINT64_MAX (corresponding
to K_FOREVER) wrong in the signed case.
- Some users compute the difference and store that in a signed variable
to compare against 0 which still doesn't work with K_FOREVER. And when
this difference is used as a timeout argument then the K_FOREVER
nature of the timeout is lost.
- Some users complexify their code by special-casing K_NO_WAIT and
K_FOREVER inline which is bad for both code readability and binary
size.
Let's introduce a better abstraction to deal with absolute timepoints
with an opaque type to be used with a well-defined API.
The word "timeout" was avoided in the naming on purpose as the timeout
namespace is quite crowded already and it is preferable to make a
distinction between relative time periods (timeouts) and absolute time
values (timepoints).
A few stacks are also adjusted as they were too tight on X86.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This fixes missing `static` function specifier.
The bt_att_chan_create_pdu is not called outside of att.c.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Updates the handling of incoming seg ack messages to comply with
the mesh protocol specification, section 3.5.3.3.2 and section
3.5.3.3.3.
Previous implementation did not restart the retransmission timer unless
the incoming ack contained at least one segment newly marked as
acknowledged. According to the spec, the timer should be restated
regardless. The implementation depends on the retransmission
timer to end the transmission early if there was no more retransmission
attempts. Checks have been added to ensure that this now happens
immediately.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
In discover_next_instance coverity did not consider the
ASSERT and warns about possibly dereferecing current_inst
which could be NULL. Modifed the code slightly to make
Coverity happy.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds an optional callback upon image data being written, can be
used for syncing or timeout purposes.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Associate command handler did not validate the provided address length.
In result, if provided address string was longer than the expected
extended address size, strncpy() would not NULL terminate the buffer,
which could lead to unexpected behavior in parse_extended_address(), as
it expects NULL terminated string.
Fix this by validating the length of the provided address string before
parsing.
Additionally, make parse_extended_address() return the parsing result,
so that it can be detected when provided extended address has incorrect
format.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Codec Specific Configuration Parameters provided by server was
not copied at bt_ascs_config_ase. Detected by PTS in BAP/USR/SCC PTS
test cases, because no LTV values appeared in ASE Codec Configured
notification.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Replaces the manual lookup function with a lookup function which
is provided when registering MCUmgr handlers which can be used to
find the function to translate error codes, allowing out of tree
MCUmgr handlers to provide error translation handlers.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Any system supporting PM must now implement
pm_state_set/pm_exit_post_ops. Before this change any platform could
enable CONFIG_PM=y, even though it did nothing, ie, no power savings at
all.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add a new Kconfig option that has to be selected by SoCs providing PM
hooks. This option will be now required to enable CONFIG_PM. Before this
change, CONFIG_PM could always be enabled, regardless of SoC providing
any kind of low-power support.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Linuxptp report UTC offset is 9472 seconds, is a byte order issue,
The right value is 37. Also fixed offset_scaled_log_var byte order.
Signed-off-by: Chen Caidy <chen@caidy.cc>
According to IEEE802.1AS Table 11-6 and 10.6.2.2.9,
802.1AS using peer-to-peer delay mechanism, two-step clock,
Grand master clock should keep this correction_field as zero.
Signed-off-by: Chen Caidy <chen@caidy.cc>
According to IEEE802.1AS 11.4.4.2.1, we need fill
preciseOriginTimestamp as syncEventEgressTimestamp.
In this follow_up message, prec_orig_ts need to filled
from net_pkt_timestamp(sync) for best accuracy. state machine
is software trigger with insufficient precision.
After this change, a grand master endpoint sync accuracy
increase from 3.5ms to 580ns with mimxrt1050_evk board.
Signed-off-by: Chen Caidy <chen@caidy.cc>
Updated SAR default values to align with the latest mesh 1.1 drafts,
and relevant Bsim tests.
Signed-off-by: Stine Åkredalen <stine.akredalen@nordicsemi.no>
When enabling thread analyzer, use printk by default. Otherwise logging
subsystem is enabled which might not be desired.
Fixes#59919
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Every USB device must buffer isochronous data for at least 1 frame in
order to remove packet jitter within a frame. USB Specification Revision
2.0 describes necessary buffering in 5.12.5 Data Prebuffering. USB Audio
1.0 specification mentions buffering in 3.4 Inter Channel Synchronization.
Set bDelay to 1 instead of 0, because bDelay 1 is both the minimum
allowed value and matches the actual device behavior.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Modified bt_cap_stream_ops_register to always register BAP callbacks
to ensure that the callbacks are always forwarded (unless later
overwritten by the application...)
The CAP Initiator Unicast will still register the callbacks itself,
to ensure that the unicast procedures still work even if
bt_cap_stream_ops_register was never called.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When a CIS is established for the peripheral, then not all
QOS values are completely valid as they are simply missing
from the CIS established event. This commit updates the
missing fields based on the QOS settings provided by the
BAP Unicast Client during QoS Configuration of the endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When initializing emulators for devices registered on an emulated bus,
Zephyr will assert if a matching emulator for the device cannot be
found. This feels overly restrictive --there may be cases where we still
want to build a driver for testing even without an emulator and drivers
should be able to handle situations where there is no device emulator
present (the I2C/SPI transactions will simply fail and the driver never
becomes ready).
This commit removes the assert and replaces it with an warning message if
no matching emulator is found.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
This intoduces dedicated Kconfig option to enable TBS client,
that makes the configuration more intuitive.
While configuring GTBS only, the user does not have to explicitly set
the BT_TBS_CLIENT_MAX_TBS_INSTANCES to 0 to disable the TBS client
functionality.
This adds also `tbs_only_client` test case to test the TBS only build
option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This improves the code readability and reduces flash usage a bit by
spliting up GTBS from other TBS instances in bt_tbs_server_inst
structure, so that some of the code could be conditionally compiled
out.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds handling of ASE control point operations in separate thread
so that the notifications of ASE state changes are sent from non-BT
thread. This ensures bt_gatt_notify_cb to be blocking waiting for
available buffers to send the notifications.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This patchset is doing three things:
1. It is fixing the bogus algorithm to find the optimal number of
descriptors for a given memory size.
2. It is changing values for VDEV_STATUS_SIZE and
IPC_SERVICE_STATIC_VRINGS_ALIGNMENT to better align to a usual cache
line size.
3. RX/TX VRINGs are now correctly aligned to MEM_ALIGNMENT (and cache
line alignment).
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add CAP shell commands for starting specific audio configurations
based on the BAP specification.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds missing tx power config options for nRF53x SoCs, as
well as the missing Radio defines for nRF53x SoCs.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Use the macro to print to handle for cases where shell context is NULL,
this is possible because in this net management event handler shell
context is not passed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Adds callback API for the following config client status messages:
- Composition data status
- Model publication status
- SIG model subscription list
- Vendor model subscription list
- Netkey list
- Appkey list
- SIG model app list
- Vendor model app list
- Key refresh status
- Heartbeat publication status
- Heartbeat subscription status
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The BAP stream object should not have a dir field. The
dir field should be stored in the EP only (to avoid having two
fields storing the same value, causing possible issues).
The field was removed, and the places that use it has been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for transmitting on multiple streams, e.g.
with the simple `send` command or with the sine generator.
This extends the start and stop sine to take a "all"
paramter to start sending on all streams.
This also fixes an issue with the seq_num when multiple
streams are transmitting, since the timing may get delayed
which then delays the seq_num which are then scheduled too late.
The fix here is to only use the timer for the inital sequence
number when starting to send the sine way, and then increment it
per TX.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The commit fixes build issue when building for two application
images in board that does not have slot0_ns_partition.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fix conditional compilation within img_mgmt_get_other_slot,
where CONFIG_MCUMGR_GRP_IMG_UPDATABLE_IMAGE_NUMBER has been
incorrectly checked and #endif incorrectly placed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Some controllers support additional connection parameter ranges
beyond what is described in the specification. Enabling this new option
allows the application to set any value to all connection parameters.
Tbe Host will perform no limits nor consistency checks on any of the
connection parameters (conn interval min and max, latency and timeou).
However, the Host will still use numerical comparisons between the
min and max connection intervals in order to verify whether the
desired parameters have been established in the connection.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a feature to suppress commands. The suppressed commands are not
logged on the command reception.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Statically created threads with K_THREAD_DEFINE() are launched only
after the SYS_INIT phase. This does not play well with NET_CONFIG
library, which may block during SYS_INIT until network interface
is UP and RUNNING.
In order to be able to connect to L2 network and thus mark the
network interface as running and unblock NET_CONFIG, we need to be
able to run conn_mgr thread during SYS_INIT. This can be achieved,
by starting the thread dynamically during SYS_INIT phase, instead
of relying on static thread creation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_if_lock() should be called only after iface pointer is verified not
to be NULL, otherwise we can end up dereferencing NULL pointer in
certain corner cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When building with the native simulator instead of attempting to
call directly to the host libC, use the trampolines provided
by the runner.
In this way we can build this code even if we are building
Zephyr with an embedded C library.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Split this tracing backend in a top and bottom to enable
building it with embedded libCs with the native simulator.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This fixes invalid memset of QoS parameters that may happen if Config
Qos operation is requested on ASE in QoS Configured state. In such case
if the requested parameters have been rejected, the ASE QoS parameters
shall remain unchanged (were memset instead). Otherwise, the stack shall
send QoS Configured state notification with cleaned up parameters (all
zero's) which was not done.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The TLS credentials libraries are purely software constructs with no
external dependencies, run them immediately after the kernel setup to
allow other initialisation functions to add credentials without the
requirement to run in the back half of the `APPLICATION` priority.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fixes erroneous packing/unpacking of model app list messages
in the configuration client and server. According to the mesh 1.1
protcol spec (4.3.1.1) two app indexes shall be packed in a 3 octet
interleaved format. The current implementation packs them in 4 octets.
This commit also provide a helper function for unpacking key indexes
as public API to facilitate future config model callback API.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds a comment stating the state of the peripheral SDU size
and why it is being assigned the PDU size on CIS established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add two input subsystem options: one for dumping input events, one for
triggering input reports from the shell.
The two are independent from each other, so dumping can be enabled on
any application that has no shell, but if the shell command is present
logging can be toggled on and off with a shell command.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Changes the Kconfig option to allow disabling mutex support, this
is to allow other Kconfig options to disable the feature.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add a user possibility to set a callback for receiving a new function.
It allows instant performing some actions, that need to be done before
context switch.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Verify validity of a received command before passing it to the general
handler.
It allows performing some actions, right after receiving the command.
The context switch is not needed. Such feature may be needed for
overloaded system, where instant reboot is required.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add a function to signal a new host command by a backend.
Use a function instead of giving semaphore, because it allows more
actions on rx event, common for all backends.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add a config to save the final result of a last host command that has
sent EC_HOST_CMD_IN_PROGRESS response. To get the final result use the
ec_host_cmd_send_in_progress_status function.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
According spec, for the same iv index, iv update flag
should trans to false, when iv update procedure complete.
When local environment has attack-node
to store old network beacon(1,1), and re-send same
network beacon(1,1) after 192hours, will cause whole
bluetooth mesh network broke.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
OOB information should be in little endian in scan report messages.
URI hash should be retrieved as it is from unprovisioned device beacon
and encoded likewise into scan report messages like we do for UUID.
Signed-off-by: Alperen Sener <alperen.sener@nordicsemi.no>
This fixes possible ASE leak in bt_ascs_config_ase in case
ascs_ep_set_codec function returns an error.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes code duplicates.
ASE Disable operation handler has been refactored by providing the
`rsp` pointer as one of the function parameters. ascs_cp_rsp_add is
not called from ase_disable explicitly, so the contents of the
response buffer are not changed in case the ase_disable is called
from non control point context.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes code duplicates.
The ASE Release operation handler has been refactored by moving the state
validation check to the ase_release function body and providing the
`rsp` pointer that is later filled. ascs_cp_rsp_add is not called from
ase_release explicitly, so the contents of the respons buffer are not
changed in case the ase_release is called from non control point context
e.g. `disconnected` callback.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Check if a network interface is managed by a network manager before
falling back to offload API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This introduces support for Wi-Fi network managers in Zephyr. The
motivation is for the Wi-Fi management layer to work with both
Network managers and offloaded Wi-Fi drivers. The device driver
decides which one to use.
network manager : Apps -> Wi-Fi Mgmt -> Network Manager -> Wi-Fi
interface
offloaded : Apps -> Wi-Fi Mgmt -> Wi-Fi offloaded interface
Support for multiple network managers has been added, each device can
choose its own network manager and there can be mix and match:
wlan0 - Offloaded
wlan1 - Network manager 1
wlan2 - Network manager 2
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Decouple interface and Wi-Fi APIs, Wi-Fi APIs are common independent of
Wi-Fi offload or implemented natively (This is preparation for
introducing Native Wi-Fi).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The management thread *barely* fits in 768 bytes of stack; when thread
local storage is in use and TLS variables are also allocated from the same
region, this stack can overflow.
Increase to 800 bytes to leave plenty of room for TLS variables.
Signed-off-by: Keith Packard <keithp@keithp.com>
Removes redundant ACK state from `struct ieee802154_context` and
simplifies the ACK procedure.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This change introduces test coverage for association request and
response. Based on this coverage, several closely related issues were
found in the association process which cannot be split into separate
changes without breaking the build.
Most notably did the associate and disassociate net_mgmt commands send
already encoded IEEE 802.15.4 MPDUs to L3 rather than L2. L3 treated
them as payload and made L2 wrap them with another LL header/footer
which produced invalid packets.
The tests also enforce better aligment of the association process with
the IEEE 802.15.4-2020 standard:
* Association requests now ask for ACK as required by the standard. The
fake driver was enhanced to produce ACK packages when requested.
* macPanId and macCoordinator* MAC PIB attributes are set in the right
order for improved filtering of association responses.
* The coordinator may decide not to assign a short address to the end
device even when associated. This is now supported.
* The coordinator may or may not use a short address. Coordinators
choosing not to support short addresses are now supported.
* Updating the association will now remove any previously added short
address from the hardware filter.
* The short address may no longer be changed by the user while
associated to a PAN. Only the coordinator is allowed to allocate short
addresses.
* Validation of outgoing and incoming association request/response
packets is improved.
All changes are documented by pointers into the spec.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Fixes an off-by-one bug in the parsing routine of the coordinator
address when associating via shell command.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Input validation of some of the IEEE 802.15.4 net_mgmt commands was
incomplete and/or inconsistent. This change introduces a consistent
approach to input validation that is easier to follow.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Calculates macResponseWaitTime and applies it to the association
process.
As the timing calculation re-uses symbol period calculations and other
PHY timing constants previously introduced, these are now shared as
utility functions.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The IEEE 802.15.4 stack defines radio API helpers that provide
simplified and encapsulated access to radio API features.
These helpers were missing the `_radio_` infix. This infix is introduced
to clearly distinguish between MAC and PHY concerns. While PHY features
may be shared between L2 implementations (including the functions
concerned here), this is not true for MAC features.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The IEEE 802.15.4-2020 standard introduces an association type field to
support fast association, see sections 6.4.3 and 7.5.2. We do not yet
implement fast association but we introduce the flag to make this
obvious.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Minor simplification in the definition of IEEE 802.15.4 Kconfig packet
fragmentation configuration.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The additional hooks provide infrastructure to construct
rules on another network stack levels. Main benefit of this
approach is packets are pre-parsed and e.g. IP filter is
easier to implement. These hooks are equivalent of prerouting
and local_in in linux's netfilter.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
Fixes an issue where a variable was used without being correctly
set by other parts of the code.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This moves copying of parameters after application return value
validation so that the metadata is not stored if rejected.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Merging the two structs cleans up significant amount of code
and makes it easier to expand later.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Previously the calculation of the PSN was done using
just a timer. This would not work correctly when
attempting to send multiple packets in a single SDU
interval (e.g. to enqueue 2 or more).
Previously we only ever attempted to send 1 packet in
the `sent` callback but scheduling the work item. However
in the case that the `sent` callback was called twice
before the work item had been triggered (possible due
to the priority of the RX thread being higher than the
system workqueue thread). This has been modified so that
if we can enqueue more packets in the lc3_audio_send_data
function, we re-enqueue the work item. We re-enqueue rather
than sending multiple in a single call to avoid blocking
other items on the system workqueue from being scheduled.
This could cause possible missed intervals (if other workqueue
items are processed), but it should be OK from a ISO perspective,
and the new PSN calculator handles this much better.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify lc3_audio_send_data to be triggered on a delayable
k_work so that we can retry it with a delay if it fails for whatever
reason.
This also moves the calculation of the seq_num closer
to when it is used, which makes sense as it is based on
a timed calculation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The current API for changing the bondable mode uses the global flag.
With Zephyr support for multiple Bluetooth identities, the API for
changing the bondable mode should be more fine-grained.
The bondable requirements of one identity should not have an impact on
another identity which can have a different set of requirements.
This change introduces function to overlay bondable flag per
connection.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
Current structure of Bluetooth Mesh Kconfig options is quite messy.
This makes impossible to understand which configuration belongs to
which feature. Especially when using interactive Kconfig interface, like
menuconfig or guiconfig.
This commit restructures the options grouping them by protocol layer
they belong to (Network, Transport, Access, etc.), or specific feature
(LPN, Friend, Proxy, Relay, etc.), or implementation (Advertiser, Shell,
Persistent storage). Amount of supported keys, subnets, group addresses
and labels are grouped under Capabilities menu. Generic options that
don't fall to any category are kept at the root menu. For better
visibility, if a specific feature or layer has more than 1 option, they
are hidden under menu.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The sizeof is used in a wrong way which causes incorrect checking a
version of a command. Use NUM_BITS instead.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The response buffer has to be cleared every command not to pass
unintended content e.g. response from a previous command, or stack
content.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Update the response buffer size, passed to a command handler, every
command, since a backend could change it in runtime.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
PR adds the statistic module to estimate frame handling.
The module helps to understand the ratio of
the received\relayed\dropped\transmited frames.
That shows the efficiency of the current configuration\implementation.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The broadcast_id and the pa_sync fields should be set before calling
broadcast_sink_add_src as broadcast_sink_add_src will those values to
compare against other receive states.
The function was also missing a call to broadcast_sink_cleanup
for the newly allocated sink in case there was an error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CIG state variable is set to CIG_STATE_CONFIGURABLE, but then
cleared by memcpy from configuration cache. Set state after memcpy.
Fixes EBQ test /HCI/CIS/BI-10-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In the case where memq_deinit in LLL flushing ends up with the free
link being the link provided by the CIS instance, and pointed to by
lll.link_tx_free, the free counter data in the link element is
overwritten during central CIS creation.
This has the effect that when starting the next CIG, there will suddenly
be 0 links available, and controller fails assertion.
By saving- and restoring the lll.link_tx before and after CIS
configuration cache copying, the free counter is intact.
Signed-off-by: Morten Priess <mtpr@oticon.com>
An advertising report must not be generated unless the AUX_ADV_IND
has been received (for ADV_EXT_IND with an auxptr)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Use CONFIG_BT_CTLR_PHY_CODED to flag out coded phy code
Don't schedule a scan for coded phy when it is not supported
Signed-off-by: Troels Nilsson <trnn@demant.com>
When a stream leaves the streaming state the `stopped` callback
will now be called, similar to how the `started` callback works.
This ensures that `stopped` is always called and not just when
the CIS disconnects.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
So they depend or select on the right NATIVE_BUILD
instead of NATIVE_APPLICATION.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
parse_number() helper function accepts long * pointer or the output,
however in several places, an address of a variable of incompatible
type was passed to the function (for example an address of a bool
variable was cast to (long *) and provided to the function). This
could cause memory overwrites or other unexpected behaviour.
Fix this, by defining a helper variable of type long, and use it with
the parse_number() function. Only after successful parsing, the value is
then assigned to the proper destination.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When PMAX value is changed, it should update all events.
I believe there is a bug that caused the code only to update
events that are ongoing (to be send).
Now if PMAX changes, next event timestamp is recalculated.
Fixes#59397
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The enum used for connection types gets named bt_conn_type to guard
against accidental usage of generic integers with relation to it.
The added default case in several switch statements avoids warnings
against unhandled enum values.
Signed-off-by: Arkadiusz Kozdra <akozdra@antmicro.com>
Fail gracefully if an HCI event of one type arrives for a handle of a
different connection type. The requested types are currently based on
what fields are used, not on the usage context, in order to keep every
correct use so far still working.
A warning is logged if the connection identified by the handle does not
match the requested connection type.
Signed-off-by: Arkadiusz Kozdra <akozdra@antmicro.com>
The "virtio_" prefix is used by the open-amp library API.
Rename local functions using "ipc_virtio_" prefix to avoid
function redefinition.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Instead of waiting for ase_buf to be available, the read of an
ASE in IDLE state can be handled without using ase_buf.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes missing control point status and ASE status change, when
failed to disconnect the CIS. As the server may, but does not have to
disconnect the CIS, the operation should not be considered as failed
when it happens.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
PR instantiates cdb and core keys to prevent scenario
when key is changed over cdb API and gets new ID but
core still operates with old ID(potentially invalid).
Known issue the keys will be desynchronized
during\after key refresh procedure.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This commits eliminates the old way of
pacs notifications, replacing k_work with
simple bt_gatt_notify.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
When doing the bt_ots_dir_list_reset_anchor we now explicitly ignore
the return value of bt_gatt_ots_obj_manager_first_obj_get
to fix a coverity issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Cast ticker_stop() calls to void where return value is not checked.
This is to satisfy coverity and indicate that return value is not
important.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
This change replaces one letter variable names with considerable
variable spans by much more readable alternatives that ease code
maintenance and help human reviewers to catch semantic errors.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The f_ctx variable renamed in this change has a considerable variable
span. This makes the code hard to read as the variable name is neither
defined in the IEEE 802.15.4 standard nor can it be deduced from the
variable name.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The 'ar' abbreviation has a well defined meaning in IEEE 802.15.4 which
is NOT the meaning of the local "ar" variable being renamed in this
change (see the comparison to the actual MHR ar field in this change
set).
To avoid confusion, a non-abbreviated variable name is introduced
instead.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The 'af' abbreviation is nowhere standardized in IEEE 802.15.4 and makes
the source code unnecessarily hard to read. It is replaced by a readable
long name.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Several distinct naming conventions existed within the IEEE 802.15.4
stack wrt header length. This change converges to a single naming
convention, the one that is less ambiguous and already most used.
The change also makes the distinction between L2 (link layer/LL) header
length and 6LoWPAN fragmentation header length to avoid confusion.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This change is in preparation for the newer frame version's more
complex compression algorithm that may compress both, the source
and the destination PAN independently.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This change renames buf to pkt_buf in one very specific instance to
distinguish the packet buffer from the frame buffer which is kept in the
same local scope. In all other instances the meaning of "buf" should be
obvious from context, not so here, though
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The bt_csip_set_coordinator_csis_inst_by_handle did not check the input
parameters and could call lookup_instance_by_handle with handle == 0
which triggers an ASSERT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If we are use the shell as a CAP initiator, then we need to
register the stream callbacks for the CAP streams as well, as
CAP will use the BAP callbacks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When populating the conns array in
bt_cap_initiator_codec_configured, coverity did not like just
having the __ASSERT, so modified the checks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When syncing via the broadcast sink or the scan delegator
it makes more sense to filter on duplicates, as the expected
data rarely changes.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The internval of how often we report
receive stats can now be configured via the cmd_recv_stats
command.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add more information when we print the recv every 100th
packet, and remove all per-recv printing.
This also resets all information on stream start. This does,
however, no properly support multiple streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The callback should not be modified by the stack,
and should thus be const.
Also fixes a missing include of conn.h.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
To further reduce the need for networking boilerplate in applications,
provide bulk versions of net_if_up, net_if_down, conn_mgr_if_connect,
and conn_mgr_if_disconnect that affect all available / eligible ifaces
at once.
Since it is not intuitive whether these functions should affect ifaces
which conn_mgr is ignoring, these functions take an argument that allows
this to be specified by the application.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
To reduce the amount of boiler-plate needed in applications, this commit
grants conn_mgr the ability to automatically take ifaces that have given
up on connecting into the admin-down state.
Tests adjusted as appropriate.
This behavior can be disabled globally by disabling
NET_CONNECTION_MANAGER_AUTO_IF_DOWN, or disabled per-iface using the
CONN_MGR_IF_NO_AUTO_DOWN flag.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
To reduce the need for boilerplate in application code, conn_mgr now
supports an auto-connect feature on all ifaces with connectivity
bindings.
conn_mgr will automatically call conn_mgr_if_connect on any iface with a
connectivity binding that enters the admin-up state, unless the newly
added CONN_MGR_IF_NO_AUTO_CONNECT flag has been set for that iface.
Also adjust automated tests to account for and take advantage of this
behavior.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
- Add missing event sleep after taking all ifaces up in
test_connect_disconnect.
- Add missing event sleep after resetting ifaces in conn_mgr_conn_before
- Fix typo in comment for internal state flags.
- Add missing NET_MGMT_EVENT_BIT to conn_mgr_connectivity event
definitions.
- Missing net_mgmt.h include in conn_mgr_connectivity.h
- Split conn_mgr_conn iface reset into network and state resets, before
and after event sleep, so that triggered events do not corrupt the
state reset.
- Reduce SIMULATED_EVENT_DELAY to 100ms to avoid timeouts on real-time
targets.
- Use macro for simulated event wait times.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
This restores a line of code that was accidentally deleted in
5580cb4391. This fixes an uninitialized
`le_addr` getting printed and producing garbage output in the scan
results.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Patch to rename struct bt_ots_init to struct bt_ots_init_param
to avoid duplicating the name bt_ots_init.
Fix for issue#45968
Signed-off-by: Jai Arora <infolinesoni@gmail.com>
Rename the bt_codec struct to bt_audio_codec_conf or
to the new struct bt_audio_codec_cap.
Rename the bt_codec_data to bt_audio_codec_data.
The purpose of this is to split the codec specific configuration
and codec capabilities into seperate structs, as they do not
reflect the same values, or used for the same purpose.
This commit depends on the preset macros workings on either
type of struct (for now), but will be modified in future updates.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Set default offloaded interface during net_context_get() call, so that
net_context_recv() can be called before net_context_connect(). There is
already an assumption about using default network interface, so this should
not be harmful.
Fixes: 2c75070360 ("net: sockets: tcp: Fix possible race between
connect/recv")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This fixes metadata length checks for BT_AUDIO_METADATA_TYPE_EXTENDED
and BT_AUDIO_METADATA_TYPE_VENDOR that should be at least 2 bytes long.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The CCID list can be empty, as the Assigned Numbers is not strict
regarding it's minimum length.
Fixes: #59666
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes missing drop of ISO Data PDUs received in non-streaming state.
The client shall indicate first it's readiness to receive the ISO Data.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes missing drop of ISO Data PDUs received in non-streaming state.
The server shall indicate first it's readiness to receive the ISO Data
by calling bt_bap_stream_start that triggers state transition from
Enabling to Streaming state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add check for CONFIG_BT_TBS_CLIENT_MAX_TBS_INSTANCES > 1 before
comparing inst_cnt, as otherwise it was always false which
caused a coverity issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Default scan mode is Active. User can force the scan mode to passive
through Kconfig option or using 'passive' option from shell.
Using either of this option will override regulatory settings and
forces all scan channels to be passive only.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
The cmd_csip_set_coordinator_discover_members did not properly
handle the members_found and addr_found values.
It has been modified to run through all known values
before scanning, and set the value appropriately.
This also fixes a minor bug where err = 0 was missing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add LL_ASSERT_OVERHEAD define to reuse the assertion check
related to increase in actual EVENT_OVERHEAD_START_US value.
Introduce Kconfig option to permit radio event be skipped
when increased prepare callback latencies are measured,
instead of assertion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Connected ISO implementation to correctly handle SN,
NESN and payload_count when prepare callback is aborted due
to CPU overhead related latencies.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the EVENT_OVERHEAD_START_US verbose assertion to each
state/role LLL implementation so that correct state/role
that is delayed is conveyed in the assertion message.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add -ECANCELED on return from lll_preempt_calc so that
assert check can be placed in the prepare callbacks of the
state/role implementations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to not use pre-programmed PPI when NRF_TIMER0 is not
used as the radio event timer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS create implementation to consider CIG events with
laziness before the new CIS in an already active CIG is
made active.
Previous laziness value of the CIG events is determined and
at the CIG event where the new CIS event_count is calculated
the lazy_active value determined is decremented from the
total lazy value.
Without this fix, event_count of the new active CIS events
where incorrect, causing CIS create resulting in fail to be
established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since the acl mtu for mesh is reduced to 37 in PR #59004, there is no
need in BT_L2CAP_TX_MTU to be longer than 33 bytes for mesh.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
If disconnection has been triggered in between the security update and
the call to `smp_pairing_complete` we need to abort the pairing.
The disconnection may have been triggered by `bt_unpair`, in that case
the keys will have been erased and it will lead to an assertion to
continue as if nothing happened.
To resolve this issue, at the beginning of `smp_pairing_complete` the
`status` is set to `BT_SMP_ERR_UNSPECIFIED` if there is no connection.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The signal strength for the connectivity monitor was
defined as int8_t, however this was too small for
LTE RSRP values, which has range [-140,-44].
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Use only single thread for handling polling of the sockets.
Each client will have only 1 active socket which to poll.
Each client can have multiple simultaneous requests ongoing.
The client only has one buffer for receiving and one buffer for sending.
Therefore the messages are reformed when resending.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Two different IPv6 addresses can have the same solicited node multicast
address, for example when they are derived from the same EUI-64
interface identifier during the auto-configuration process. For example,
an interface with a physical address 70:07:12:34:56:78 can have the
following:
- link-local address FE80::7207:12FF:FE34:5678
- global unicast address 2001🔢::7207:12FF:FE34:5678
Both addresses will have the same solicited-node multicast address
FF02::1:FF34:5678. Currently, if one removes the global unicast address,
the solicited-node multicast address is also removed, leaving the
link-local address out of the solicited-node multicast group. This
breaks some protocols like Neighbour Discovery.
Count how many times the solicited-node multicast address is used and
remove it only if it is not shared by any other unicast address.
Fixes#59683
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
First search for a match, then perform the removal outside the loop.
There is no functional change but this prepares for some future changes.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Move the creation of the multicast solicited node address outside the
loop. There is no functional change but it prepares for some future
changes.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Instead of setting the default_stream when we initiate
the configure operatio, we set it when it has succeded.
In case that the codec configure fails, the stream should
not really be considered configured as the default.
This also ensures that the default_stream is set when
using the CAP shell commands.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently, it is not possible to use hawkbit with code that requires
POSIX_API to be set due to the dependency on NET_SOCKETS_POSIX_NAMES.
Since a lot of other code has already been moved to `zsock_`, this
commit does the same for hawkbit.
Co-authored-by: rojedag <r.ojeda@vogl-electronic.com>
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
Lwm2m firmware object have defined a write of zero length
string as a cancel operation.
So allow lwm2m_set_opaque(path, NULL, 0);
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
It may happen that CIS is scheduled in the future and did not started
yet once accepted. When ASE goes to Releasing state in such case
the ISO has to be disconnected, because otherwise ASE will stuck in
releasing state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Since clear_lc3_sine_data references audio_send_work, it must
be declared before the clear_lc3_sine_data function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_bap_scan_delegator_find_state did not properly return the
correct receive state due to confusing return value of the
iterator function.
Modify it to use a simple bool.
This fixes all issues with "Failed to find receive state for sink"
when using the Broadcast Sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the CSIP Set Coordinator verify_members we verify that
all members have unique ranks.
This was done as part of the initial loop, but it is
more efficient to do this as a separate loop as we can reduce
the number of items to compare, as well as guarding this properly
by !zero_rank.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes 2 issues:
1) The broadcast code would only ever get the first value, even if
the command specified up to 16 values.
2) The broadcast code is not just hex values, so hex2bin does not make
sense, and strlen + memcpy is much simpler.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the broadcast assistant have found the expected broadcast
source it should stop scanning.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The shell_print was meant to print the address of the broadcast
source along with the broadcast_id.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bad code field should only be printed when there is an actual
bad code, otherwise it just prints all-0s.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move BT_CTLR_SCAN_SYNC_ISO_SET to Kconfig from Kconfig.ll_sw_split
This means it can be used by other controllers and alligns with location
of other iso configs - e.g. BT_CTLR_SYNC_ISO_STREAM_COUNT
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Add a native way to log Host Command communication.
Use Zephyr logging system to do it. Use debug and normal levels.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Use one common function to send Host Command response. It allows
handling all response types within one function.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add a configuration option to set Wi-Fi as default interface and also
add an API to get first available Wi-Fi interface.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Identify the Wi-Fi capability to the networking stack and also the type
of Wi-Fi (Native vs Offloaded), this helps identifying Wi-Fi interfaces
that can be used by applications.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi is based on L2 Ethernet, so, all drivers are registered as
Ethernet L2, but in order to distinguish true Ethernet and Wi-Fi
devices, add a L2 type within Ethernet.
Also, handle offloaded net devices that also offload Wi-Fi.
This approach is better than adding a new Wi-Fi L2 as that would mean
invasive changes which are unnecessary.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
As per table 4.2 in BAP v1.0.1, the BAP unicast client shall
support at least 2 (> 1) endpoints in either direction if it
supports that direction.
Since Kconfig does not support such requirements (0 || > 1),
this is done using a BUILD_ASSERT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Pause and resume functionality was written into assumption
that sockets are closed before resuming.
With use new options CONFIG_LWM2M_RD_CLIENT_STOP_POLLING_AT_IDLE
or CONFIG_LWM2M_RD_CLIENT_LISTEN_AT_IDLE this is not always true.
Fix the state machine, so that on those cases, sockets are not
closed and resume is always similar like from the QUEUE mode.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
