In some relatively rare conditions, the DFU detach/attach happens to
fast, which cause the host to not notice it. It seems to to be the case
for instance on STM32 when no endpoint are being used.
Adding a 1 ms delay (i.e. one SOF period) between the detach and the
attach fixes the issue.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allocate the GPIOTE channels that the Bluetooth Controller needs to use
with the dedicated function provided by the nrfx_gpiote driver instead
of using hard-coded indexes of these channels, as now, when the driver
supports multiple GPIOTE instances, it would be much more difficult to
properly inform the driver which channels should be reserved.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The BIG handle for an ISO sync receiver is provided by the host. The
valid range is [0x00..0xEF], and this requires the controller to allow
non-consecutive handle numbering. This means that even if only one sync
set is supported, a BIG handle of ex. value 2 must be supported.
As the code uses indexing and range checking directly by handle, this
needs to be changed. Introducing the handle index, which sequnces the
handles such that index = 0 is always the "first handle", regardless
of value.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Instead of selecting legacy MBEDTLS symbols, use corresponding
PSA_WANT ones when possible (note: some legacy symbols do not
have a PSA correspondance).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Now that support for all PSA_WANT symbols is in place, we can
enable MBEDTLS_USE_PSA_CRYPTO when MBEDTLS_PSA_CRYPTO_C is
enabled as well.
Note: this commit also moves USE_PSA_CRYPTO out of CRYPTO_C
dependency in config-tls-generic.h because TLS/DTLS/X509 modules
of MbedTLS can rely on *any* implementation of PSA crypto APIs
not only the MbedTLS one. TFM is for example an alternative
to this.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Current on x86 & risc-v that implement stack trace, the
maximum depth of the stack trace is defined by a macro.
Introduce a new Kconfig:EXCEPTION_STACK_TRACE_MAX_FRAMES
so that this is configurable in software.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Selecting `CONFIG_EXCEPTION_STACK_TRACE_SYMTAB` will
enable the symtab generation which will be used in the
stack trace to print the function name of the return
address.
Updated the `stack_unwind` test to test the symbols in a
stack trace.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Use pyelftools to extract the symbol table from the
link stage executable. Then, filter out the function names
and sort them based on their offsets before writing into the
`symtab.c`, this is similar to how the `isr_tables` works.
To access the structure, simply include the new header:
```c
#include <zephyr/debug/symtab.h>
```
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This commit is to fix a warning which is reported in Coverity scan
after device runtime pm is enabled.
Signed-off-by: Roger Wang <roger1.wang@intel.com>
When the interface goes down, the safest thing to do is to return to
the INIT state, as there is no guarantee that any state is preserved
upon the interface coming back up again.
This is particularly the case with WiFi.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Support for using Link Time Optimization (LTO) when
building application with open source Bluetooth Low
Energy Controller. This reduces code space usage.
Current Memory Usage at the time of this PR (hci_ipc):
BT_CTLR_OPTIMIZE_FOR_SPEED:
Memory region Used Size Region Size %age Used
FLASH: 260112 B 256 KB 99.22%
RAM: 60136 B 64 KB 91.76%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_OPTIMIZE_FOR_SIZE:
Memory region Used Size Region Size %age Used
FLASH: 232292 B 256 KB 88.61%
RAM: 60128 B 64 KB 91.75%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_OPTIMIZE_FOR_APP_DEFAULT:
Memory region Used Size Region Size %age Used
FLASH: 232292 B 256 KB 88.61%
RAM: 60128 B 64 KB 91.75%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
BT_CTLR_LTO:
Memory region Used Size Region Size %age Used
FLASH: 221484 B 256 KB 84.49%
RAM: 60120 B 64 KB 91.74%
SRAM1: 0 B 64 KB 0.00%
IDT_LIST: 0 B 32 KB 0.00%
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove legacy LL optimize for speed dependency required to
support encryption feature in Controller where crypto was
performed in highest priority ISRs to setup encryption in 3
radio events (this now requires 5 radio events in split LL).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There's such a case captured. When log immediate mode is enabled, each log
message is output per character. However, "log_output_flush()" function is
still called with zero data length at the end of "log_output_process()".
Better to make "buffer_write()" returns immediatley if buffer data
length is zero.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
If time aware system has more than 1 gptp port, because there is only
one boolean to handle callback registering, a race condition can occur
for instance in case 2 master ports are waiting for a timestamp following
sending of sync message. More in details, callback may be unregistered
by port 1 while port 2 is waiting for timestamp event.
The issue is solved by declaring as much as boolean and struct
net_if_timestamp_cb as the number of declared ports
(=CONFIG_NET_GPTP_NUM_PORTS).
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Setting a ration of 0 breaks the computation of scaled_rate_offset
in gptp_md_follow_up_prepare().
According to IEEE802.1AS 10.2.2.3.9, when sent by clock master
entity, rate_ratio shall be equal to gmRateRatio. But since
in gptp_md_follow_up_prepare(), in case we are the grand master
clock, we take the assumption that clock source is the local clock,
we may set this ratio to 1.0.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Without this patch, in case time aware system is grand master capable
but is not the grand master clock and behave as a bridge so that it
shall ONLY relay SYNC and FUP messages from slave port to master port(s),
SYNC and FUP are mistakenly generated by ClockMasterSyncSend state
machine.
This patch only call ClockMasterSyncSend state machine in case a Grand
Master clock is present and is this time aware system.
This check is not described by IEEE802.1AS. Instead, according to
10.2.9.3, the SiteSyncSync state machine shall not take into account
information from ClockMasterSyncSend in case this time aware system is
not grand-master capable. Current implementation of ClockMasterSyncSend
state machine sends sync indication to the PortSync entities, instead of
sending it to the SiteSyncSync entity. And the SiteSyncSync state machine
does not make any check.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Commit 413eceeddb ("net: gptp: fix follow_up message correction_field")
breaks computation of follow up correction field in case time aware system
is not the grand master clock but behave as a transparent clock which relay
sync and follow-up messages from one slave port to one or several master
port(s). In this case, according to IEEE802.AS 11.1.3 and 11.2.14.2.3,
md sync send state machine shall compute the sum of link propagation delay
and residence time, expressed in grand master time base. Then this quantity
shall be added to last received fup correction field to build value of
correction field. This patch checks whether time aware system is the grand
master clock or not, and computes value correction field accordingly.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
An earlier pull request implementing observe support was merged too
hastily. It had a few issues:
1. The predicate for whether a request should be marked not ongoing was
wrong (it checked ret != 0 instead of ret < 0)
2. Without observes in mind, MID-based deduplication is not a required
feature. Deduplication was handled implicitly - the exchange would get
dropped after the first response anyway, so duplicate responses would
not get matched to anything. But with observes, there are several
responses in an exchange. This commit adds this.
3. Using coap_request_is_observe(&internal_req->request) in the response
handler requires the whole request to stay in scope for the lifetime of
the observation, which I observed was not always the case. Adding an
is_observe bool to the internal struct improved stability significantly.
With these fixes, GETs with observe option works very well.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
These are safety checks to guard against silent data corruption. The
implementation currently does not clobber bufs, but soon it will. The
bufs will be zero-copy segmented and fragmented, which involves
overwriting already-sent contents with headers for the next fragment.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Changes the parsing of boolean input parameter "PolicyApply"
to DFD start command to use shell boolean parse library.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds a missing network include file which was causing an undefined
function build failure, likely caused by a recent change affecting
includes in other header files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add a new option to split off the building of the HCI layer of the
controller. This layer is not needed by the controller unit tests, and
becomes problematic with the planned change to use devicetree for HCI
drivers.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Add statistics module which tracks the usage of modem backend
transmit/receive buffers if implemented by a backend.
A modem backend may register itself to the modem backend
stat module, and advertise its transmit and receive buffer
sizes and momentary usage (length).
The modem backend module tracks the maximum usage, which can be
output to the shell using the "modem_stats buffer" shell command.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Changes the log level from ERR to DBG for element_model_recv for the
following cases:
- Element does not have the appkey for incoming message.
- Element does not have destination address for incoming meesage.
When the received message is for a group address, element_model_recv
is called for all elements on the device. One or more elements may contain
a model that is subscribing to this address. If more than one element
contains the same model. but they do not all share the same application
key as the incoming message is encrypted with, or they do not all
subscribe to the same group address, then the log will show error
message for these elements, which is misleading.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Filtering out received packets which source address matches one of our
own addresses has broken the duplicate address detection conflict
reporting.
In case Neighbor Advertisement is sent during DAD collision, the source
address of such packet might be set to the address that triggered the
collision. This address would also be set on our interface, marked as
tentative. Therefore in order to make duplicate address detection work,
we cannot filter out packets in case our own address is still in
tentative state.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A support for RDNSS option should not force DNS subsystem being enabled
in the system, especially that the option is enabled by default. It
should work the other way around - the option is supported only if DNS
was enabled by the user.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Because of include file changes, we now need to include both
hostname.h and net_if.h in the syslog logging module directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
With native_sim, this error is seen a lot when socket
service API is used.
<dbg> net_sock: get_sock_vtable: (net_socket_service):
Invalid access on sock 3 by thread 0x807a8e0 (net_socket_service)
If we just ignore the error, then we might get into forever
loop which is not good. So if this happens, mark the eventfd
fd as not pollable to basically ignore the eventfd support in
this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print also thread name when printing socket access error.
This helps debugging what thread caused it.
Lowering the Error to Debug as we could be missing vtable
for example for eventfd descriptors, this is easily seen when using
socket service API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the LLMNR responder is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the mDNS responder is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using net_context API directly, the DNS resolver is
changed to use the socket service API. This allows DNS access
for offloaded sockets and can lower overall memory consumption.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Ensure that in LLCP reference to node_rx is cleared when
retention is NOT used, to avoid corruption of node_rx later
re-allocated
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
In case a CPR is intiated but rejected due to CPR active on
other connection, rx nodes are leaked due to retained node not
being properly released.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The ISO API and implementation have existed in Zephyr
for several years, and while not fully qualified, stable
or tested yet, it's not experimental anymore (and have
not been for a long time).
This commit removes any references to it being experimental
and instead defines it as unstable by setting the version to
> 0.1.0. 0.8.0 is being used as the initial version, as that
is what other unstable modules was defined to have as their
initial version if they were not stable (>= 1.0.0).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If bt_conn_set_state(conn, BT_CONN_DISCONNECTED) is called
while the connection is already disconnected, this triggers
a warning. This is likely to happen when bt_conn_cleanup_all
is called as part of bt_disable.
Added the state check to avoid unnecessary warnings in the log.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for bt_disable in the ISO implementation.
This involves clearing all information related to states
in the controller, such as the BIGs and CIGs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since the CSIP API expects a set member struct for nearly all
functionality, the reference to the full set member (along with
the CAS specific CSIS) should be given to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The input address originates from an RX net_buf which may
be unaligned. Consequently, word access to this unaligned buffer
can trigger an unaligned access exception on certain platforms,
such as the ARMv7 Cortex-A9.
Signed-off-by: Taras Zaporozhets <zaporozhets.taras@gmail.com>
Use the same scheme as for string descriptors. Descriptors can be added
or removed using the existend interface.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
We could reuse the BOS header, but there are parts that are only needed
in the legacy device support or used internally and the tests. Move this
parts to the appropriate places.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
It simplifies the macros to create the string descriptors. We also no
longer need placeholders for the SerialNumber descriptor when it is
generated from hwid. In the future, we can store other descriptor types
in the same list.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not use application-provided placeholder buffers. Generate
SerialNumber just before ASCII string is converted to UTF16LE. Make
dependency on HWINFO optional, but enabled by default.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move and rework string descriptor data to a separate structure so we can
share memory with another type. Also add description to the
USBD_DESC_STRING_DEFINE macro.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This is slower but should have no real effect. In the future we can
support more than ASCII7 format and store it in other memory areas.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add function to get string descriptor index and function
to remove linked descriptor from a device. This abstracts
it a bit so that the user does not need to know how it is
handled internally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
A new Kconfig option which generates syscall stubs assuming that
extensions will always run on userspace, thus simplifying linking
them, as there's no need for z_impl_ stubs (used for direct syscalls),
CONFIG_LLEXT_EDK_USERSPACE_ONLY.
While defining __ZEPHYR_USER__ could have the same effect for optmised
builds, people building extensions on debug environments - thus
non-optimised - would suffer, as they'd need to somehow make the stubs
available (by either exporting the symbol or implementing dummy stubs).
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Loadable extensions need access to Zephyr (and Zephyr application)
includes and some CFLAGS to be properly built. This patch adds a new
target, `llext-edk`, which generates a tar file with those includes and
flags that can be loaded from cmake and make files.
A Zephyr application willing to expose some API to extensions it loads
only need to add the include directories describing such APIs to the
Zephyr ones via zephyr_include_directories() CMake call.
A new Kconfig option, CONFIG_LLEXT_EDK_NAME allows one to control some
aspects of the generated file, which enables some customization - think
of an application called ACME, willing to have a ACME_EXTENSION_KIT or
something.
All EDK Kconfig options are behind CONFIG_LLEXT_EDK, which doesn't
depend on LLEXT directly - so that EDK features can be leveraged by
downstream variations of loadable extensions.
Also, each arch may need different compiler flags for extensions: those
are handled by the `LLEXT_CFLAGS` cmake flag. An example is set for GCC
ARM.
Finally, EDK throughout this patch means Extension Development Kit,
which is a bad name, but at least doesn't conflict with SDK.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
s2ram procedure used RAM magic word for marking suspend-to-RAM. This
method may not work in some cases, e.g. when global reset does not
reset RAM content. In that case resuming from s2ram is detected when
global reset occurred.
RAM magic word method is the default but with
CONFIG_PM_S2RAM_CUSTOM_MARKING a custom implementation can be provided.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This commit upgrades the LE audio API and implementation
from experimental to unstable.
LE Audio have existing for quite a few years in Zephyr
and is not going anywhere, but at the same time it still
has significant effort remaining before it can be
considered stable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Improve coap_client_cancel_requests(). Ensure it can be
called from a callback. Report error to waiting callbacks.
Clear active flag.
This is useful when the network becomes unavailable
or prior to disconnecting in order to save power.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Take card lock when running IOCTL command, to avoid race conditions that
could occur within the lower SDHC transfer implementations (as these
will be called by sdmmc_wait_ready)
Fixes#72368
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Apply the commit 21975231e2
("usb: device: cdc_acm: Prevent recursive logging loop")
to the new CDC ACM implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When CONFIG_USB_DEVICE_STACK=n then the sine wave
generator was enabled, which caused build errors.
This commit fixes those errors and also adds the
nRF5340 as a build target for the USB tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The mic_state is a guarded field in event_done_extra where it was
accessed outside of its guard.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
SD ops card_read() implementation does not need to unlock mutex, as this
is managed by the calling function card_write_blocks. Remove this stray
k_mutex_unlock() call.
Fixes#72287
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Reword frequency and timing selection logic for SDIO framework so that
the maximum supported timing mode between the card and host will be
selected, even if the maximum frequency supported by the host is not
equal to the maximum frequency for that mode.
Also, resolve an issue where a host and card combo only supporting HS
mode or worse would still use legacy timing mode, because the CCCR flags
were not being checked when checking if HS bus speed could be used.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SDMMC framework frequency and timing selection logic has several
longstanding issues, including:
- requiring that SD hosts support the maximum frequency possible for a
given UHS mode in order to apply that timing
- selecting SDHC_TIMING_SDR25 for high speed mode, when SDHC_TIMING_HS
would be correct
Rework the frequency and timing selection logic within the SD framework
to resolve these issues.
Fixes#52589Fixes#67943
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The default stack size of RFCOMM DLC is 256.
The default value is sufficient for basic operation.
If more stack space is used (such as call function printk)
in context of callback disconnected of RFCOMM DLC, the
default stack size is not sufficient.
Add a configuration BT_RFCOMM_DLC_STACK_SIZE to configure
the RFCOMM DLC stack size.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
To avoid the case that CONN_TX is available but RFCOMM_TX is
unavailable, set the default value of BT_RFCOMM_TX_MAX to
BT_CONN_TX_MAX.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The maximum data length of event packet is 255 for BR/EDR.
Such as the data length of event Remote Name Request
Complete is 255.
Set BT_BUF_EVT_RX_SIZE to 255 to avoid error "Not enough
space in buffer" from bt_hci driver.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Lock the scheduler to ensure that the context is not preempted before it
is fully initialized.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
There are controllers with capability to detect VBUS state change. This
can be used in a generic application to explicitly handle the VBUS
detected event after usbd_init() and for example allow the PMIC to
detect to what type of port device controller is connected.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
For the simple events, do not check whether the device driver and stack
are marked as initialized. USB device notification will reschedule
delivery if the stack is not yet marked initialized.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since no threads are waiting for the FIFO and we do not need any k_fifo
features, we can just use slist.
Some notifications (caused by interrupts), especially "VBUS ready", can
be triggered very quickly right after UDC initialization if the USB
controller is already connected. Depending on the global thread
configuration, messsage publishing work can be executed before the
context is marked as initialized. Use delayed work to reschedule
publishing when the context is not initialized.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fixes remote address for ping before upload. This caused the ping in zperf
upload to timeout as shown in the following output:
```
uart:~$ zperf udp upload 2001:db8::2 5001 10 50 1M
Remote port is 5001
Connecting to 2001:db8::2
Duration: 10.00 s
Packet size: 50 bytes
Rate: 1000 kbps
Starting...
ping 2001:db8::2 timeout
Rate: 1.00 Mbps
Packet duration 390 us
```
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/68674
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Allow Block-Wise writes to resources that have enough buffer for
the whole content. Calculate the offset before calling the
content specific write handlers when callback is not set.
Previously only resources with post-write callback were able to
assemble the content.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When Block-Wise transfer restarts, the post-write callback should
receive some indication that the block is actually a beginning of new,
instead of part of previous transfer.
Fixes#71351
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The callback is only ever called when we received a
notification from the BASS server that the receive state is
removed, which cannot contain an error code.
Thus it does not make sense for the callback to have an
error code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Call `getopt_init()` to reset `state->optind` instead of directly setting
`optind = 1`. The `getopt()` function uses `getopt_state` from
`getopt_state_get` for state handling, so `getopt_init()` should be called
to correctly run the command again.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
According to the `SHELL_CMD_ARG` macro, the `mand` argument of `cmd_dump`
should be 5, including the command name itself, `dump`.
Meanwhile, the `opt` should be 2, as this value describes the optional
field, which is [-w <width>].
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
For vendor datapaths that do not use a netbuffer to write SDUs
into, the callee of sdu_write currently has to keep track itself
of how much data has been written to the current SDU; This is wasteful
since ISOAL already keeps track of that. Add an sdu_written parameter
to the callback to inform the callee how much has been written to the
current SDU already so the callee can write using the correct offset
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add initial HID device support. Unlike the existing HID implementation,
the new implementation uses a devicetree to instantiate a HID device.
To the user, the HID device appears as a normal Zephyr RTOS device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
If the recipient is not the device then it is probably a
class specific request where wIndex is the interface
number or endpoing and not the language ID. e.g. HID
Class Get Descriptor request.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This function was used to shortcut HCI for combined host + controller
builds. It doesn't provide much value and adds complexity to the HCI
driver interface, so just remove it. This means vendor-specific HCI
commands is now the only way for the host to access the same
information.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Enabling vendor-specific extensions also implies support for vendor
events, so a separate Kconfig option for that is unnecessary.
One small additional thing this requires is the use of the
__maybe_unused annotation, since there's no-longer a single Kconfig
option that the controller hci.c can use to know that the vendor event
helper symbols are needed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
When the network inteface goes operational DOWN (for example cable
unplugged), clear "joined" flag on all registered multicast addresses,
so that MLD report is sent for them when the interface goes back up.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When bringing interface down, all IPv6 multicast addresses are removed
from the interface. However, when the interface was brought back up,
rejoin_ipv6_mcast_groups() would look only for solicited node mcast
addresses already present on the interface. In result, after going back
up, the interface was missing solicited-node mcast addresses for those
unicast addresses, that were already present on the interface when
bringing up.
As net_ipv6_mld_join() does similar checks to skip MLD when not needed,
we can just skip the lookup when rejoining, and use already defined
join_mcast_nodes().
Additionally, check for IPV6 and NO_ND flags on the interface before
attempting to add the address back, those multicast addresses are not
needed if ND is disabled on the interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a network interface is brought down and back up, DAD was not
performed for link-local unicast address.
This happens because the logic in the network interface code assumed
that DAD for link-local address is triggered when the address is added,
and it's explicitly omited when looping over IPv6 address. This wasn't
the case however when interface was brought back up, as the address was
already present on the interface, hence DAD skipped.
In Linux, the link-local address is removed from the interface when the
interface is brought down. Such approach solves the issue described,
hence implement it in a similar way in Zephyr.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is no need to check our own context when going through
the used ports in the system. This prevents error when binding
in some corner cases.
Fixes#72035
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
