Given that the offloaded poll handling differs from the poll handling of
native sockets (entire poll function call is offloaded), some
adjustements were needed to make TLS socket work with offloaded poll
calls.
To achieve this, in case socket offloading is used, instead of jumping
directly to the offloaded poll call, a TLS wrapper for the offloaded
poll will be called. This wrapper will do additional checks at the
mbedtls level, to verify that the event is only notified to the caller
when the application data is available (i. e. not to report events
during handshake or when partial data is received, not ready to
decrypt).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate TLS sockets implementation from net_context layer. Instead of
calling net_context functions directly, create an underlying TCP/UDP
socket, and call socket functions on it instead. This results in a
simpler design, where we don't need to duplicate specific parts of code
from the native socket implementation. Additionally, this allows to use
a different TCP/UDP stack underneath (i. e. when sockets offloading is
used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds helper function to verify protocol, which was done in
two different places in the code. The function returns the underlying
protocol information on success.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When connection is closed and we send ACK flag, use proper seq
values so that any data that is still in flight will get acked too.
Currently this assumes that window is still open.
Fixes#27876
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Entropy device, as being unique here, does not need to be passed through
mbedtls and can instead set static locally.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Following are the changes to variable names that are matching
with tag names (Rule 5.7 violations)
In kernel.h, event_type is matching with a tag name in
lib/os/onoff.c. Added a _ prefix to event_type and
also to the macro argument names.
In userspace.c, *dyn_obj is matching with the tag name
dyn_obj in the file itslef. Changed it to dyn
In device.h, device_mmio.h, init.h and init.c,
changed the *device to dev. Except for one change in
init.h
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ANCOUNT has nothing to do with label count so remove the
original while loop and just go through all the labels until
we have read all of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is not possible with valid DNS messages but is possible if
we receive malformed DNS packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to create SOCK_DGRAM type AF_PACKET socket. This
allows user to send raw IP packets without specifying
L2 (like Ethernet) headers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The steps_removed field must be placed right after root_system_id
so that priority vector comparision can be done in one memcmp()
call. This fixes the best master clock selection algorithm (BMCA).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In 'struct coap_resource' path description:
- the plus symbol represents a single-level wild card in the path;
- the hash symbol represents the multi-level wild card in the path.
This change keeps compatibility with RFC 7252 but allows handling
multiple requests in single function.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added additonal checks in net_ipv6_input to ensure that multicasts
are only passed to the upper layer if the originating interface
actually joined the destination multicast group.
Signed-off-by: Philip Serbin <philip.serbin@lemonbeat.com>
Now that TCP2 is the default stack, make the shell compatible
with both stacks.
Note: net_tcp_foreach is not implemented in TCP2, so related
code depends on TCP1.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
PPP Phase Diagram [1] allows only one way phase change. In current
implementation there is an additional RUNNING phase, which is entered
just after NETWORK phase.
Prevent going back from RUNNING to NETWORK phase when Term-Req was
received, as this is meaningless for overall PPP operation and violates
PPP Phase Diagram property of having one way direction change.
This change also improves Adminitrative Close handling (calling
lcp_close()). This request results in moving into TERMINATE phase. Then
LCP is put down (by calling lcp_down()) and then ppp_link_down() is
called, which so far (before this patch) resulted in moving back to
NETWORK and then to DEAD. Right now (after this patch) we move directly
from TERMINATE to DEAD phase, which is exactly how [1] specifies it.
[1] https://tools.ietf.org/html/rfc1661#section-3.2
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
State Transition Table [1] specifies that Administrative Close should
result in CLOSING state. This is not respected in case of LCP, as
STOPPED state was forced in lcp_close().
Don't force going into STOPPED state in lcp_close() and rely on
ppp_fsm_close() to move to CLOSING state instead.
This patch fixes overall Adminitrative Close procedure and allows to
move back into fully operating PPP connection once again after
Adminitrative Open.
[1] https://tools.ietf.org/html/rfc1661#section-4.1
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Print role information next to port information. Also make
sure that port number is set correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save some memory and separate common string snippets from larger
strings. In this case "does not match" sub-string is printed by
several warning prints so separate the sub-string from the bigger
string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
This patch implements optional authentication phase, which is done
between link establishment and network phases. It is part of LCP option
negotiation to decide whether authentication is needed and which
protocol will be used. For now we add only PAP support and try to
negotiate it when some other protocol (e.g. CHAP or EAP) is proposed
earlier. For simplicity reason we only add one way authentication
support, which means that we try to authenticate to the other peer, but
do not require authentication from it.
This is an important step to make PPP work with cellular network modems,
because most of them require to provide username and password within PPP
authentication phase. Those credentials are used by modem to login to
cellular network. In most cases however it is enough to provide dummy
values, because they are not verified. For this reason and simplicity of
this patch we hardcode PAP Peer-ID and Password now.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This module had only some header includes, without actual code. Remove
it, as it is better to create one module per authentication protocol
anyway.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add enums of PAP, CHAP and EAP authentication protocols. Also add their
string representations, so they will nicely show up in logs during
debugging.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Interpret -EINVAL return value from options' parse() callback as "option
value is not supported". After receiving such value nack() callback will
be executed in order to put supported value in the response.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Given the comment in `ipv6_event_handler`, the init function shall wait
for the last added IPv6 address to be confirmed with DAD. This is
contrary with current logic, which will only wait for the first address
to be confirmed.
This commit adds a break statement in the loop, not to overwrite the
recent address to verify with an older one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When verifying the parameters check NULL value separately.
This will avoid nasty warning message to be printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add function pointer to vtable and use that directly instead of
routing via ioctl() call. This is done as we are trying to get
rid of ioctl() calls in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not route close() calls via ioctl() as that is error prone
and quite pointless. Instead create a callback for close() in
fdtable and use it directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of casting struct in6_addr, sin6_addr member is now used
directly, like in every other instance of calling net_ipv6_is_prefix().
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This macro has no use in code and was most probably replaced by
FSM_TIMEOUT (which resolves to CONFIG_NET_L2_PPP_TIMEOUT) with the same
default value.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Those macros are not used anymore after commit 35a2519091 ("net: l2:
ppp: add generic function for handling Conf-Req"), because we no longer
need preallocated table on stack for parsing option information.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This option is not used after commit 50b2cafc42 ("net: l2: ppp: use
net_pkt API for replying to Configure-Req") has been applied. We don't
need to preallocate table on stack for parsing option information, so
information about maximum number of supported options is useless.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
For platforms using non-native stacks, net_tcp_init() should be
compiled out, similar to how it is done in tcp_internal.h.
Fixes#27463
Signed-off-by: Vincent Wan <vwan@ti.com>
Instead of just showing network interface pointer, print also
network interface index. This helps debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OT_RADIO_CAPS_SLEEP_TO_TX was added as a radio capability
for ieee802154 radio. Waiting on RX state before transmission
is alternative condition to OT_RADIO_CAPS_SLEEP_TO_TX support
as it was a result of OpenThread architecture and is actually
not needed in the Zephyr. Such change lets to start transmission
faster and lower SED device power consumption in active state
about 30%.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Enable the new TCP stack as a default one in order to get people
to use it before Zephyr 2.4 is released.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr platform does not support MAC retransmissions on its own,
so OT_RADIO_CAPS_TRANSMIT_RETRIES capability was removed.
It should not be enabled basing on IEEE802154_HW_CSMA support,
as these are quite seperate features. Current implementation
assumes that platform performs retransmissions on its own,
what is not provided and leads to lack of MAC retransmissions.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Allow user to enable CONFIG_NET_PKT_TXTIME and
CONFIG_NET_PKT_TXTIME_STATS at the same time. This will increase
memory consumption but as the CONFIG_NET_PKT_TXTIME_STATS is
only meant to be enabled for debugging purposes this overhead
can be accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In TCP, we increase the net_pkt refcount in order to resend
it later if we do not receive ACK in time. Because we are not
getting a new net_pkt, the TXTIME statistics would be calculated
incorrectly. So if we re-send, reset the net_pkt creation time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt RX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_RXTIME_STATS and
CONFIG_NET_PKT_RXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg RX net_pkt (7) time 459 us [0->23->16->257->160=456 us]
The extra stats is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt TX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_TXTIME_STATS and
CONFIG_NET_PKT_TXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg TX net_pkt (5867) time 82 us [0->33->20->27=80 us]
The extra stats information is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect information how long net_pkt has travelled in IP stack
in certain points. See network documentation what these points
are and how to get information about the timings. This initial
commit adds support to TX timing collection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_NET_CONFIG_INIT_TIMEOUT should not only be available if
CONFIG_NET_CONFIG_AUTO_INIT=y. If *_AUTO_INIT=n then application
may wish to initialize net manually and still use configured
timeout.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
If the CONFIG_NET_CONFIG_AUTO_INIT is not set, then let application
to do the initialization manually. In that case the app should call
net_config_init_app() when it is ready to setup the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Include directories for ${ARCH} is not specified correctly.
Several places in Zephyr, the include directories are specified as:
${ZEPHYR_BASE}/arch/${ARCH}/include
the correct line is:
${ARCH_DIR}/${ARCH}/include
to correctly support out of tree archs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The original return type of tcp_data_get() was unsigned and the
return value <0 was not checked properly.
Fixes#25723
Coverity-CID: 210559
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LwM2M server might modify the lifetime value while the device is
registered, hence it's needed to obtain the value directly from the
Server object instance, before each Register Update.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A proper way to match a Security object instance with a Server object
instance is via Short Server ID resource. Both coupled object instances
should carry the same value of this resource in order to me considered
matched.
This was not implemented in the LwM2M library and it was incorrectly
assumed that the Security object instance index corresponds to the
Server object instance index. While such apporach works is simple
scenario, it might yield incorrect results when bootstrap is used.
Fix this, by verifyng the Short Server ID resource in the Secuirty
instance used, and finding a matching Server instance. The server object
instance is stored for future use in the engine.
Additionally, remove an extra Server object instance that was created
when the bootstrap procedure was used. Since the boostrap Security
object instance does not have the corresponding Server object, it's
enough to have a single Server instance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove the static buffer for TCP options. Make sure that the
options were read properly to temp buffer.
Fixes: #25729
Coverity-CID: 210056
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently, OpenThread builds produce warning from the OT logger module,
because we don't use one of the parameters provided by logger macro.
Explicitly mark the parameter as unused to prevent warnings being
thrown.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Drop unused ppp_parse_options_array() function and 'struct
ppp_option_pkt' data type. Both were used in initial PPP implementation,
but are not longer needed after recent PPP refactoring.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Introduce new ppp_config_info_req() function that can be used in order
to handle options received within Conf-Req packet. As an input it takes
array of supported options. If received Conf-Req packet contains unknown
options, then a Conf-Rej packet is automatically generated with all of
those options. If all of received options are supported, then function
continues to parse each provided option individually by calling option
specific callbacks.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use a generic handler for received options in Conf-Rej packet. This will
mark all those options as rejected, to they will no longer be included
in subsequence Conf-Req packets.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use a generic handler for received options in Conf-Rej packet. This will
mark all those options as rejected, to they will no longer be included
in subsequence Conf-Req packets.
This allows to communicate with PPP peers, which do not support DNS1 and
DNS2 options.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was no generalized way how to handle negotiation of "my
options" (those sent with Conf-Req packet to peer). Peer response for
proposed options and their values were not tracked in any way, so
rejected (by peer) options were sent over and over again in subsequent
Conf-Req packets. In case of IPCP it means that all sent options such as
IP_ADDRESS, DNS1, DNS2 were mandatory for being supported by peer in
order to successfully finish negotiation. For example if 'pppd' was the
configured peer (e.g. when using with QEMU and net-tools scripts),
without ms-dns being configured (which is the default), then "my
options" negotiation failed.
Introduce generalized mechanism for negotiating "my options", so it is
easier to maintain current set of supported options and easily add new
options to the implementation in future. FSM instance inititialization
function can provide information about supported "my options".
Information is is passed as a table of 'struct ppp_my_option_info'
containing:
* option code (type),
* callback for adding option to Conf-Req packet,
* callback for received Conf-Ack with that option,
* callback for received Conf-Nak with that option.
Store also runtime information about each negotiated option. First of
all remember which options have been rejected, so they are not sent to
peer once again in the next Conf-Req packet. This will solve issue with
IPCP negotiation when peer doesn't support DNS1 or DNS2 options. Keep
also track about which options have been acked, so such information can
be verified before bringing FSM instance up.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Rework implementation of ppp_parse_options() to be more generic and
flexible to use. Pass callback and user data for parsing each option
separately.
Keep old functionality of ppp_parse_options() accessible via
ppp_parse_options_array() function. This will make sure that old code
using this function doesn't need to be changed now. There are plans
however to remove ppp_parse_options_array() once there are no more users
of it in future.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use net_pkt API to assemble Configure-Req messages. Compared to net_buf
API it allows us to simplify code.
Remove append_to_buf() helper functions, as their functionality is now
totally replaced by net_pkt API. Additionally net_pkt API handles data
that wraps several net_buf packets, which was not the case with
append_to_buf().
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use net_pkt instead of net_buf API for replying to Configure-Req. We use
the fact that for now we reply with either Configure-Ack or
Configure-Rej only. In both cases we can allocate net_pkt ahead, because
we know its maximum length (which is equal to length of received
Configure-Req packet).
Make also an improvement in generic FSM code and reply with
Configure-Rej to all Configure-Req for which there is no config_info_req
callback set. Use that to drop LCP specific Conf-Req handling code,
because there is no option properly supported there yet.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far ppp_parse_options() has returned enum net_verdict. This type was
never used directly by network stack. Instead, caller was always
checking for NET_OK and returning error code in case of failure.
Change implementation of ppp_parse_options(), so it returns error code
in case of error and 0 when succeeded. This better fits its generic
purpose.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is no allocation in ppp_l2.c file, which mean that
BUF_ALLOC_TIMEOUT macros is not used anywhere. Drop it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_if a kernel object with type K_OBJ_NET_IF so that we
can restrict access to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There was a race condition when ppp_fsm_open() was called in CLOSED
state. Conf-Req was sent first, then state was changed to
REQUEST_SENT. In the meantime however we have already received Conf-Req
to which we responded with Term-Ack.
Change state before sending Conf-Req, so we handle Conf-Req from peer
properly instead of dropping it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
OpenThread API is not thread safe, therefore it shall be protected
from being preempted by OT thread, or other thread issuing API calls.
The problem showed up after a recent OpenThread upmerge, where changes
in the Joiner class made this problem visible. W/o extra protection,
`otJoinerStart` call can be preempted by the OT thread, leading to an
unexpected behavior.
Introduce new function to allow to lock any API operations for others.
Anyone willing to call OT APIs, shall lock the mutex first to get
exclusive access to the stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`otLinkRawSetEnable` was removed and Link Raw mode is now enabled with
`otLinkRawSetReceiveDone` which requires to register a callback
function. Since it makes little sense for OT L2 to register a Link Raw
callback in current setup, leave it up to the application to register
the callback.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bugfix: in tcp_conn_unref(), the conn was zeroed before removing it
from the connection list (tcp_conns).
Zeroing conn, results in zeroing its 'next' member,
which in effect removes all its following connections referred to
in tcp_conns linked list.
The solution is to move the memset() after sys_slist_find_and_remove().
Signed-off-by: David D <a8961713@gmail.com>
The network interface check was invalid when IPv6 Router
Solicitation message was timeout and interface was not found.
This is highly unlikely but needs to be checked properly.
Fixes#27145
Coverity-CID: 211511
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently, the application could receive a duplicate CONNACK event, in
case the server rejected the connection at MQTT level (with an error
code provided with CONNACK message). A subsequent connection close (with
`mqtt_abort` for instance) would produce the duplicate event.
Fix this by reporting back to the MQTT engine, that the connection was
refused, so it can close the connection rightaway. Rework the event
notification logic, so that DISCONNECT event instead of a duplicate
CONNACK event is notified in that case.
Also, prevent the MQTT engine from notyfing DISCONNECT event in case of
socket errors during initial connection phase (i. e. before
`mqtt_connect` function finished).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
is_init field is useless, because there is only single code path that
always sets it to true before using it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure IPv6 address is removed from network interface in IPV6CP
protocol down handler. This makes sure that application can receive
high-level notification about missing network connection.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure IPv4 address is removed from network interface in IPCP
protocol down handler. This makes sure that application can receive
high-level notification about missing network connection.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Added the 'fall through' comment to switch to quiet compiler
and coverity warnings.
Fixes#25724Fixes#25726
Signed-off-by: David Leach <david.leach@nxp.com>
To allow hardware crypto acceleration custom mbedtls library needs to be
prepared. However current implementation forces the default library to
be used.
This patch allows not using the default library and passing custom
mbedtls target to use with openthread.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The TCP2 stack does operations directly on the packet data which may
or may not be aligned. The unaligned access causes a fault on the
Cortex-M0+ so use the UNALIGNED_* macros instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Putting data to local buffer before transmission was removed
to optimize operation. Local buffering was not needed, as passed
buffer cannot be modified until sending is finished.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Currently, functions for poll sock_fds array management are buggy, in
case there is another socket open (for instance the socket for firmware
update download), it could get overwritten, if the LwM2M socket was
closed and re-opened in a meantime (e. g. on registration timeout).
Fix this, by appending new entries to the sock_fds in continuous manner.
In case of removal, the deleted entry is overwritten by the last one,
and the last one is cleared.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During FW update, the application expects a consecutive data stream.
Therefore retransmitted blocks shall not be forwarded to the
application, but ignored. In case blocks are received out of order,
return an error and do not handle this block.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When FW update in PUSH mode is used, the firmware is encapsulated in the
TLV as an opaque data, according to the LMWM2M satandard, and then
sliced into blocks and transferred block by block in several
transactions. Therefore, the TLV header is only present in the initial
message.
Current implementation did not handle this case well, reporting errors
on consecutive blocks, therefore making the FW update in PUSH mode
broken.
This commit fixes this issue with following changes:
* The TLV is only assumed to be present in the initial block, while
consecutive blocks will be processed directly into the appropriate
handler,
* 32-bit variables shall be used whenever dealing with the opaque data
length, since the firmware size can easily exceed the 16-bit range,
* Additional information, required for the FW block transfer to work
properly were added to the block context structure,
* The application shall only be notified of the actual data length, and
not the total block size (the total TLV size including header).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When the dupplicate address detection mechanism is not used, we should
not wait for IPv6 address configuration. Because of the bug we are
waiting for it, when CONFIG_NET_CONFIG_MY_IVP6_ADDR is not set.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Remove the `sm_bootstrap_reg_done` function, which produced duplicated
logs. The bootstrap registration done event is already logged on state
transition. Additionally, in case bootstrap procedure took longer time,
the duplicated log message was printed on each `lwm2m_rd_client_service`
call (500 miliseconds by default).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The security object instance used should be cleared on engine reset,
otherwise we might end up using invalid object instance for the
registration (i. e. if the engine was restarted during the bootstrap
procedure due to socket errors, the registration attempt will use
bootstrap security object instead of finding a proper one).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During the bootstrap procedure, when Boostrap Finish was received, the
response message was not initialized properly, resulting in a socket
error (NULL pointer porovided) and the response not being sent.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Z_STRUCT_SECTION_ITERABLE() provides an alignment so remove
the 32 byte alignment for net_if and ppp_protocol_handler structs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use system provided Z_STRUCT_SECTION_FOREACH() and
Z_STRUCT_SECTION_ITERABLE() macros instead of manually coding
everything for network sections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Different switch was used for build to allow including all shim body
in zephyr without the need for building openthread from this repo. This
allows developer to include custom OpenThread sources as part of the
application.
This change is needed as Thread is a subject of certification and
sources provided by zephyr may not necesairly pass certification or be
precertified. User is allowed to use certified OpenThread version
this way.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Fix compilation error when the DIAG module is enabled.
All core functionalities are provided.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
When this happens, ip6_addr_cb and ipv6_addr_event_handler() both look
unused, since they are passed to macros which discard them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In order to implement a blocking connect, add a semaphore
and block on it in net_tcp_connect().
The semaphore is released when ESTABLISHED state is reached.
In case tcp_conn_unref() is called while waiting on the semaphore,
defer the unreference, tcp_conn_unref() will be called from
net_tcp_connect().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to improve readability, refactor and simplify
the control flow in net_tcp_connect().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order for events to be correctly interpreted in SYN_SENT,
check for SYN and ACK simultaneosly.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
net_tcp_put() can be called before ESTABLISHED state
is reached, send FIN only in ESTABLISHED state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Single work object for whole fsm was not being able to handle more than
single packet at a time. Because of that we have overwritten already
scheduled packets, resulting in fsm timeout and net_pkt leak.
Use net_pkt work object instead, so we can safely schedule more than a
single packet.
This commit also drops workaround for qemu_x86 unit testing.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Current implementation of net_ipv6_send_rs() uses
net_ipv6_addr_create_ll_allnodes_mcast() for creating RS packet.
As result we send RS packet to all-nodes destination [FF02::1],
but RFC4291 requires all-routers destination [FF02::2] for RS packets.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
`addrlen` parameter is updated on each `recvfrom` call, indicating the
actual address length returned. In case both, IPv4 and IPv6 are used on
different sockets (i. e. on regular LWM2M socket and FOTA socket), the
returned address length will differ.
In case `from_addr_len` is not reinitialized on each iteration, the
value stored in the `from_addr_len` variable will eventually indicate
the smaller IPv4 address size, therefore resulting in a failure in a
consecutive call on an IPv6 socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Although LwM2M engine uses cooperative threads, the internal `send()`
implementation might trigger context switch when it calls a kernel
function, therefore resulting in `send()` call being entered from both
the LwM2M thread and the retransmit work.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently there is a single function that handles both Configure-Ack and
Configure-Rej messages. This is obviously wrong for Configure-Rej,
because implementation applies options received in the message.
Remove Configure-Rej callback, so those frames are simply ignored for
the time no valid handling code exists.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Clear negotiated options in protocol down handler. That way all
addresses are properly requested (by sending 0.0.0.0 in Configure-Req)
in the subsequent option negotiation phases.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The context should only clear messages it owns, not all of them. Since
both context (LwM2M and FOTA) share common message pool, they might
interrupt their operation otherwise (i. e. cancel retransmissions).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The FOTA socket was not closed when download finished or an error
occured.
Additionally, fix the socket fd verification (it was assumed 0 is not a
valid fd which is not correct).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In function z_vrfy_net_addr_pton(),
the final copy should be to 'dst' variable not to 'src'
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
In case unsopported TLV type or malformed packet is received, the
`do_write_op_tlv` function will end up in an infinite loop. Prevent that
by returning an error code in case it does not recognize TLV type.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is already a variable 'network_protos_up', which stores number of
network protocols being up. Additionally each network protocol has its
own state represented by is_ip{,v6}cp_up. Use the latter in FSM up() and
down() callbacks.
This fixes a case when both IPCP and IPv6CP protocols are going
down. When using ctx->is_network_up only one of them (the first) was
deinitialized correctly, second stayed always up (at least partially,
e.g. not calling ppp_network_down()).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Each PPP packet sent on wire needs to have at least 4 bytes length. Set
that length for outgoing Term-Req and Term-Ack packets. Also update
length validation to check for at least 4 bytes instead of at least 1
byte.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
It fixes #issues/26220.
openthread_start function is called when L2 enable(iface, true) is
called. openthread_stop is called when L2 enable(iface, false) is
called. openthread_stop makes the device to leave the OpenThread
network.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread BR can assign addresses via DHCPv6 or when acting as an
NCP, addresses can be added manually. Currently, those addresses are
handled in the same way as auto-configured addresses.
This patch maps the newly introduced mAddressOrigin of otNetifAddress to
Zephyr's net_addr_type.
This way an application can register a handler and differentiate by type
of assignment:
```
static void handler(struct net_mgmt_event_callback *cb,
u32_t mgmt_event,
struct net_if *iface)
{
if (iface->config.ip.ipv6->unicast[i].addr_type == NET_ADDR_DHCP) {
}
}
```
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Some options were available in the options.cmake but were not reflected
in Kconfig.
Added possibility to enable additional configuration options for OT.
Some of the options were left commented out as those options are not
yet supported e.g. require Thread 1.2 or require shim changes.
As openthread has gazillion configuration options that are passed as
define value, created generic option for passing any number of those
values separated with space.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Currently user needs to specify quite much additional options to enable
OpenThread support. He also needs to set ip address count,
heap size, etc depending on features enabled.
Nade changes to automatically select/set some of the options on
enabling OpenThread
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Both ASYNC_CTRL_CHAR_MAP and MAGIC_NUMBER are not supported right
now. Send Configure-Reject for them instead of Configure-Nak, as we
don't even propose new values in reply (which should be part of
Configure-Nak).
Send also Configure-Reject for MRU option, as we don't respect it
either.
Drop both count_rej and count_nack, as we can rely solely on nack_idx to
send Configure-Reject or not.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sync receive timeout was using invalid value (nanoseconds
instead of milliseconds). This caused unnecessary state switches
from SLAVE to MASTER and back.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add debug prints when the port announce information state
machine state changes. This is useful in debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The port number is stored starting from 0 in Ethernet context.
But in gPTP, it is an index which starts from 1. So increase
the value by 1 for a value returned from Ethernet context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It may be useful for the application to register its own callback for
ot state changed event which does not override the current one.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
It may be useful to start openthread manually but with default
network settings. For instance when the application wants to register
ot state changed callback which should be done before openthread
starts.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Allow to configure, how long before registration timeout should the
Registration Update be sent. The fixed 6 seconds used so far, might
not be enough in slower networks (like NB-IoT), resulting in frequent
re-registrations at LWM2M level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread API is not thread-safe.
Moved creation of otMessage to the Thread task and created api
for passing it properly.
This way it should be less possible for an issue to occure eg.
during message buffer allocation.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
ppp does not populate the lladdr fields in the received packet.
To enable routing for packets received on the ppp interface, the check
of the link layer addresses in the packet must be skipped.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Added automatic strdup for RAM %s parameters. Postponed format
processing to idle time. Automatic parameters counting during
compilation. Very fast execution for up to three parameters.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
This is no longer required since drivers implementing the sockets
offload interface were migrated to use pure zsock_ instead of
raw POSIX types and functions.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
A net context in LISTENING mode waits for incoming connections, once
a new connection is established a new net context is spawned which
is responsible for handling the new connection.
Therefore when closing a LISTENING context it is not useful to send FIN
as it is never connected. Actually closing the connection would be done
by calling close on the spawned net context which is returned by the
accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
With timeout==0 count is set to 0 as well and then it is decremented to
-1. It is later checked == 0 and continues to decrement and loop.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Under Linux when you shutdown a socket which is blocked on
an accept call the error code returned by accept is EINVAL.
Modify the socket code to be inline with this behaviour.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
When closing a listening socket the functions waiting on the
FIFO will be unblocked this will result in receiving a NULL child
context. If that is the case return an error instead of carrying on.
Return the same error code (EINVAL) that is returned on Linux when
calling shutdown on a blocked accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
In case CoAP packet does not carry payload, and the last option is
zero-length, the option structure was not filled with data (opt number
and length). Fix the length check to prevent this from happening.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This should be boolean according to specification. It makes difference
when JSON encoding is used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Avoid null pointer access by checking that Ethernet device has
PTP clock before trying to get the actual PTP clock device.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far net config initialization code relied on number of services
needed by application. This was fine as long as all enabled
services (e.g. CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y) were selected by
project configuration as "needed" (e.g. CONFIG_NET_CONFIG_NEED_IPV4=y,
CONFIG_NET_CONFIG_NEED_IPV6=y). Problem appeared for example when both
IPv4 and IPv6 were enabled (CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y), but
only IPv6 was marked as "needed" (CONFIG_NET_CONFIG_NEED_IPV6=y). In
such situation number of required services was equal to 1. When IPv4
setup was completed, this resulted in returning from net_config_init()
function. Application code failed, because IPv6 was still not
functional.
Do not rely on number of services anymore, as it is error prone. Use
flags instead to mark which services are ready. Compare those flags with
the flags passed to net_config_init() (selected in project configuration
in most cases) to decide whether network configuration has completed
already or not.
Also introduce services_notify_ready() and services_are_ready() helper
functions to isolate implementation details from the logic.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
With current design there is single semaphore (called 'waiter') for
wakeing up initialization thread. This thread should then check for
number of protocols that still need to be initialized. This happens now
only when waiting on 'waiter' semaphore times out.
Do not check for k_sem_take(&waiter) return value, as all needed
information about protocols being initialized already is in 'counter'
semaphore.
Fixes: #25358
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add command to register a receive callback to the net_context used for
the TCP connection that is opened with 'net tcp connect'. The receive
callback will simply print the number of bytes received and inform if
the connection is closed. This makes it possible to test both the tx
and rx paths with the net shell.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
It might happen that while we are waiting for the response
to one of our query, we receive a query to resolve another name.
Previously this would make the current name resolution to fail because
only responses were expected to be received.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Any CoAP implementation when use at least block transfer or is a server
side need access some CoAP options as integer values. This add a method
at public interface and defines for block wise operations to avoid code
useless code duplication.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
It add an option to configure openthread thread priority class
by the application if there is a such need.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The SET_ERRNO() macro does nothing if a positive value is provided
to it, and the functions were not returning -1 or setting errno
as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
APIs were returning -1 without setting errno if the file
descriptor looked up a null object or there was no function
installed in the vtable. Set to EBADF for this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Net pkt is added into the ot net list after queued net pkt into
the net_rx which bases on it. It affects in losting net pkt when for
instance ot thread is preemptive.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The eth_stats_update_errors_rx() implicitly assumes that passed pointer
to struct net_if is not NULL.
This is not true for MCUX's eth_rx() (in eth_mcux.c), where we can
execute eth_stats_update_errors_rx() after net_recv_data() returning
-EINVAL because of passed NULL iface pointer.
This change fixes this problem with adding extra check on iface not
being NULL before it is dereferenced.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This change fixes routing for routes when the nexthop is a link-local
address of a connected peer.
The issue was that nexthop was correctly set from the routes, but the
code did not detect that the nexthop address (link local of the pc on
ppp interface) was on the ppp interface, because
net_if_ipv6_addr_onlink() only evaluated the network prefix and not
any other information (like the nbr list).
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This change adds new, optional switch to 'net ping' command - to
be more specific the '-I <iface index>', where the <iface index>
is the number of supported network interface.
One can discover this number from the Zephyr shell after running
'net iface'.
The default interface stays the same - just the switch is added to
override the used interface for 'net ping' invocation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Cleansession is hardcoded to 1 but some use case might require 0
to make the sessions persistent (ie get messages sent while the
client was offline)
Signed-off-by: Xavier Naveira <xnaveira@gmail.com>
This PR enables the user to configure the maximum command length for
OpenThread's CLI using Zephyr's shell, which is currently fixed to
256 characteres. This limitation was not enough for certain allowed
OpenThread commands, like some variants of 'ot dataset mgmtsetcommand'.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Right now shell pointer is not assigned before doing a scan, so scan
results are printed using printk(). Save shell instance in context, so
results are printed using shell_fprintf(), thus better aligned in the
console output.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The network statistics is stored for each traffic class, but the
collecting function was given net_pkt priority. The priority
must be first converted to traffic class and then the statistics
stored to correct place in the stats array.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some radio drivers need configuration before start-up. Up to now only
the RF2XX drivers allowed this, but other radio drivers need this as
well. In particular for setting EUI64 addresses.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The original sockets system calls used file descriptors which
were actually net_context pointers. For all socket system calls,
any calls from user mode would check if the caller had permission
to use the net context.
This was later changed to not stuff net_context pointers into file
descriptors, but all the permission checking was unintentionally
lost, allowing all threads on the system to
read/write all socket file descriptors in the system at will, with
no way to isolate applications running on the same microcontroller
from each other's network activity.
This patch restores the permission checks on network context objects
for socket system calls that originated from user mode.
The call to z_object_recycle() was never removed from
zsock_socket_internal(); this is again leveraged to grant the
caller who opened the socket permission on the net_context
associated with the returned file descriptor.
To ensure that all socket calls do this checking, all uses of
z_get_fd_obj_and_vtable() have been routed through get_sock_vtable().
Objects have initialization state set and thread permissions
reset to just the caller in common zsock_socket() code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The socketpair file descriptor context objects are heap allocated
and not drawn from a static pool. Register these as kernel objects
when we create them if user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr running on MPU devices have a different memory model than
process-oriented OSes like Linux and require a method to set
kernel object permissions on a file descriptor's underlying
context object. Add this, and a test to show that it is working.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Used for permission validation when accessing the associated file
descriptors from user mode.
There often get defined in implementation code, expand the search
to look in drivers/ and subsys/net/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Need to use %zd in formatter string for net_pkt_get_len since it returns
a size_t otherwise we get something like:
error: format ‘%d’ expects argument of type ‘int’, but argument
3 has type ‘size_t’ {aka ‘long unsigned int’} [-Werror=format=]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In this, case is_nonblock is false and will_block is true.
Therefore, we *may* block, and furthermore we *expect* to
block. Checking is_nonblock is, in fact, redundant, and
passing K_FOREVER to k_sem_take() is justified.
Fixes#25727
Coverity-CID: 210611
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Due to new checks in mbedTLS config sanitizer, TLS option can no longer
be left enabled, when TLS is not used. OpenThread needs MBEDTLS_MD_C
and MBEDTLS_CIPHER_C even without TLS being used, so we need an option
to enable them manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Router Advertisement can have prefix option. It's length
is 4 but the code did not check that which meant that we could
accept malformed packet. See RFC 4861 chapter 4.6.2 for details.
Fixes#25694
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not add same IPv6 prefix, received from RA,
multiple times to prefix timer list. This avoids possible
denial-of-service issue if we receive suitably crafted RA packet.
Fixes#25698
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread moved from 4 to 5 debug levels and it was not possible
to configure all of them with Kconfig.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
In order to support the retransmission for the outgoing data:
1. The outgoing data packet is appended to the send_data queue
in net_tcp_queue_data().
2. tcp_send_queued_data() is called and will use tcp_send_data()
to sends queued but unsent data packet by packet
until there's an unsent data and the receiver's window isn't full.
tcp_send_queued_data() subscribes send_data_timer
that will handle retrasmissions with tcp_resend_data().
3. tcp_send_data() peeks a single chunk of data from the send_data
queue that will not exceed the maximum segment size
until the the receiver's window is full.
tcp_send_data() uses conn->seq and conn->unack_len as the sequence
number for the TCP packet.
conn->unacked_len is advanced on each send.
4. On data acknowledgment:
- acknowledged amount of data is removed from the beginning
of the send_data queue
- conn->seq is advanced by the acknowledged amount
- conn->unacked_len is decremented by the acknowledged amount
- send_data_timer is cancelled
- tcp_send_queued_data() is called to send queued but
prevoiusly unsent data
5. On timeout, tcp_resend_data() will reset conn->unack_len,
peek one packet from the beginning of the send_queue and resend,
terminating the connection on retries exceeded.
Meanwhile the outgoing data tcp_send_queued_data() is just
appended to the send_data but not sent.
In case of the acknowledgement, tcp_send_queued_data() will
start sending multiple packets until the receiver's window
is full.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the retransmission for the outgoind data,
add the following into the TCP connection:
- struct net_pkt *send_data (used as a queue)
- send_data_total
- unack_len
- send_data_timer
- send_data_retries
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the send window, add send_win into
the TCP connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the data retransmission, refactor tcp_out()
into tcp_out_ext() which supports passing the sequence number.
In addition drop modifications of the connection sequence number
from tcp_out_ext(), this is the responsibility of data retransmission.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to use struct net_pkt for the outgoing data queue,
update tcp_pkt_alloc() macros, so they support allocation
without buffer.
Additionally, merge tcp_pkt_alloc() macros macros into one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Unsuccessfull packet clone in tcp_data_get() isn't handled,
add an error handling and don't ACK the incoming data in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to handle sequence overflow cases, use
net_tcp_seq_greater() to check if the sequence is greater/lower.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The initial sequence number for a connection should be randomized
to prevent easy guesses.
Do not randomize the sequence number if network test or
test protocol is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
There was a possible race condition between sock_is_nonblock()
and k_sem_take() in spair_read() and spair_write() that was
mitigated.
Also clarified some of the conditional branching in those
functions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The link address was not printed correctly as log_strdup() was
missing from the debug print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print detailed information about a given net_pkt. This is
useful if there is a memory leak and you want to see more
detailed information about the data inside the buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added support for Qemu User Networking and tested with
qemu_x86 model. The support is kept simple assuming that
the TAP interface will always be preferred for more
sophisticated / practical use cases.
QEMU User Networking is implemented using "slirp", which
provides a full TCP/IP stack within QEMU and uses that
stack to implement a virtual NAT'd network. As this
support is built into QEMU, it can be used with any model
and requires no admin privileges on the host machine,
unlike TAP.
Added documentation to facilitate the user.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
The LLDP packet was created but its type was not set to LLDP
and was sent as ARP message.
Fixes#25084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add OpenThread configuration option, which allows to configure and start
OpenThread stack operation manually. This mode should be used in NCP
devices, as well as is needed for certification purposes, where
OpenTread stack have to be configured by the test framework and not
initialize and join the network on its own.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Frame format was validated, but its length should be also validated
relevantly against the format.
Fixes#24970
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace:
DT_FLASH_ERASE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), erase_block_size)
DT_FLASH_WRITE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), write_block_size)
As this allows us to phase out the old generator.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adding RFC1350 compliant support for TFTP Client in Zephyr. The
current implementation is minimal and only supports the ability
to get a file from the server.
Things for the future include support for putting files to
server and adding support for RFC2347.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
In order to avoid retransmissions from the peer's side
on full-close, handle states properly.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If net_pkt_pull() would cause an empty net_buf, then unref
those empty buffers from the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far socket errors reported by poll/recvfrom were ignored, which could
lead to an unexpected behavior when socket was left in an undefined
state.
Fix this, by requesting a re-registration in the LWM2M state machine,
which will close the faulty socket and open a new one. Note, that simply
closing and re-opening a socket in the lwm2m engine would not work,
since this would silently invalidate any open observations on the
lwm2m server side (due to port number change). Triggering a fresh
registration will notify the server to update its observations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
SNTP implementation defined symbols like "MODE_MASK", which can easily
conflict with similary laxly defined symbols in other modules, and
indeed, we hit a case like that (below). So, prefix these symbols
consistently with "SNTP_", until more clear private namespacing
convention are made pervasive in Zephyr.
subsys/net/lib/sntp/sntp_pkt.h:14: error: "MODE_MASK" redefined
include/arch/arm/aarch32/cortex_a_r/cpu.h:17: note: this is the
location of the previous definition
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
On OT network with poor coverage, very often request/observe packets
doesn't get it's ACK and consumes from pendings/replies/message stacks.
In such cases when LWM2M engine tries to recover by resetting its state,
it fails because of lack of free messages.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
In networks with high latencies (like NB-IoT), it's quite common to
recieve duplicated response. It's not an error condition, a correct way
to handle it is to simply ignore the duplicate. Lower the log level for
this event, not to disturb users.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retaransmission logic was not correct in the lwm2m_engine, and could
lead to faulty behavior in case multiple messages were pending for
retransmission in the queue.
1. Since there is a singe delayed work item for entire retransmission
queue, `coap_pending_next_to_expire` should be called before
scheduling next timeout, to identify which message is going to expire
next (and when). Currently, the engine always set next timeout, based
on timeout from the message being currently re-transmitted.
2. In case the message was re-transmitted several times, and is removed
from the retansmission queue due to a timeout, next retransmission
should be scheduled, in case there are other messages on the queue.
3. Verify the timeout of the earliest message to expire in the
retransmission handler. In case messages from the beginning of the
queue were removed, we might need to schedule the retransmission
again, instead of sending message rightaway.
4. `lwm2m_send_message` is not handling retransmissions anyway, so
there's no need to check send attempts. Instead, verify
retransmission work item is already pending, and update its timeout
if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, coap_pending structure kept track only of the timeout interval
between two consecutive retransmissions. Calculations inside
`coap_pending_next_to_expire` relied only on this value. This approach
gives incorrect results though, in case multiple messages are pending
for retransmission.
For instance, assuming initial retransmission timeout is set to 2
seconds. If some message had been retransmitted already, its timeout
would be increased to 4 seconds. Any new message added to the pending
list would have a retransmission timeout set to 2 seconds, and will be
returned as a first message to expire, no matter how long the initial
message was already on the list.
To resolve this, add a `t0` field to the coap_pending structure. This
field is initialized to the initial transmission time, and is increased
on each retransmission by the retransmission timeout.
`coap_pending_next_to_expire` uses this value to calculate absolute
time, when the next retransmission should take place, and based on this
information returns correctly first pending message to expire.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In order to fix the line tracking of the TCP packet allocation
with the test protocol enabled, refactor tcp_pkt_alloc(),
so the line of the allocation can be tracked properly.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The LwM2M stack would previously ignore all OPAQUE resources when
reading them. This meant that it was impossible to read them, even if
there was a custom read callback.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
Some services like DHCHPv4 directly send raw packets to the iface.
This causes issue when the iface does not implement l2, e.g.
because it is a socket offload interface. fix that.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Make sure we only parse the received TCP options only once. Store
the options to tcp conn struct for later use.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes an issue with TCP options reading. Previous approach
was accessing the options with pointers (th + 1). This does not work if
TCP options span multiple net_pkt buffer fragments. Instead net_pkt
functions must be used.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
During registration, first thing LWM2M does is trying to close a socket
indicated by sock_fd stored in its context. In case it is not
initialized to some invalid value (-1 in this case), LWM2M may close an
ambigous socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to avoid retransmissions from the peer's side
on active connection close, acknowledge the incoming FIN+ACK
in FIN_WAIT_1 state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
We cannot directly use the local address in net_context when
registering the connection as it is not proper type. So create
temp address variable for that purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Avoid dynamic allocations and all the issues if we run out of
memory, by placing the connection endpoint directly to TCP
connection struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Bug fix and improved `payload` handling in `http_client_req`.
Changes to `http_client_req` behaviour:
If the user provides `payload_len` it is used to generate the
`Content-Length` header. This is done even if `payload_cb` is used to
provide the actual data. If no `payload_len` is specified then no
`Content-Length` is generated.
If `payload_cb` is provided it is called to send the payload data.
Otherwise `payload` is used as the payload buffer and sent. If
`payload_len` is not zero, it is used as the size of `payload`.
Otherwise `payload` is assumed to be a string and `strlen` is used to
determine its size. This is to maintain current behaviour and not break
existing samples.
Fixes#24431
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
In tcp_endpoint_cmd() we allocate and then almost immediately
destroy the allocated endpoint. This is quite inefficient so
use a endpoint from stack in the compare.
Separate endpoint allocation from value setting so the caller
can decide how the endpoint union values are set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Cell ID resource was not initialized properly in the Connectivity
Monitoring object, making it unusable from the application.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some other part of Zephyr has similar defines (SRC)
causing build failures.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Assigning the allocated IPv4 endpoint as struct sockaddr
leads to the memory overwrite, assign the correct structure,
i.e. struct sockaddr_in.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
There was no way to use Openthread CoAP api in zephyr application so
far. These changes enable the feature. Now you can fully use CoAP
communication in an application working in Thread network.
Signed-off-by: Lukasz Maciejonczyk <Lukasz.Maciejonczyk@nordicsemi.no>
Set information about Frame Pending Bit from the ACK response in the
frame passed to OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to implement active connection close with the
TIME_WAIT state, send FIN and enter FIN_WAIT_1 state.
We actually send FIN+ACK as most of the implementations do.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support TIME_WAIT state during the TCP connection
termination, add a TIME_WAIT timer and the corresponding state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to improve readability, rename TCP_FIN_WAIT
states into TCP_FIN_WAIT_1, TCP_FIN_WAIT_2.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fill the mTimestamp filed in OpenThread frame based on the net_pkt
timestamp value (only if NET_PKT_TIMESTAMP is enabled).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This change is to allow access to the firmware block context in order to
give the firmware update callback implementation an indication of when
to reset the flash context. Additionally, it allows for a validity check
between the total expected size downloaded and the actual size
downloaded. A simple implementation can check if the block context's
current downloaded blocks is equal to the expected block size in order
to determine if the flash context needs to be reset. This approach
seemed the simplest, and knowing the firmware block context can have
other purposes. This has been tested by accessing the block context
during the update in the block received callback and confirming that the
callback had information regarding the current downloaded bytes.
Fixes#16122
Signed-off-by: Kyle Sun <yaomon18@yahoo.com>
Received frames shall be handled in the OpenThread thread, not in
the receiver thread.
Passed received frame to the function that will handle it in a proper
thread instead of calling otPlatRadioReceiveDone directly.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
OpenThread received frame handling shall be done in the OpenThread
thread.
Created API to pass net packets to the proper thread and handle them
there.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The time parameter cannot be K_NO_DELAY because the time delay
parameter is ms so using value 0 instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_context API will change, the s32_t timeout parameter
will be changed to k_timeout_t. All the Zephyr users of this API will
be changed in subsequent commits. This is internal Zephyr API only,
so the API is not deprecated etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use k_timeout_t internally, no change to user API.
Clarify the documentation of the timeout parameter that it is
in milliseconds.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 64-bit time in order to avoid overlaps, and do not use K_MSEC()
as that will convert to k_timeout_t which we do not want in this
case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread uses "tx started" notification to start ACK
timeout if the driver does not support it.
In order for this to be achieved tx task needs to run in parallel
to the OpenThread task, otherwise it may delay the gap between
cca and tx or run after transmission has already finished.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The function calculates the number of octets put, but does not return
it. Call sites check for non-zero values suggesting this is a bug.
See https://habr.com/en/company/pvs-studio/blog/495284/ fragment 12.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the size of the target buffer as the maximum length when
formatting with snprintf.
See https://habr.com/en/company/pvs-studio/blog/495284/ fragment 3.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This patch enables handling of a single octet of option-kind at the end
of the option list (EOL). Also, add functionality to drop a segment with
an invalid single octet option-kind at the EOL.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
The net_buf subsystem is now fully compatible with the new timeout
API, so move the selection of the legacy API to those specific
subsystems that use net_buf and still need converting.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch updates the net_buf API to use k_timeout_t in essentially
all places where "s32_t timeout" was previously used. For the most
part the conversion is trivial, except for the places where
intermediate decrements of remaining timeout is needed. For this the
z_timeout_end_calc() API is used.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use existing network stack calls to create net pkt,
ip header and udp header creation. Also simplify
finalize api calls.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Use existing network stack calls to create net pkt,
ip header and tcp header creation. Also simplify
finalize api calls.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_context local sin/sin6 addresses are used only
when input src is not available. So ASSERT should
be inside if block.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case hardware CSMA CA is used, ieee802154 L2 does not initialize ACK
processing structures, as it does not need to process ACK messages. As
it is not possible to conditionally disable ACK reporting to the upper
layer, ieee802154 could end up using uninitialized kernel primitive
(semaphore) in the ACK handler, which lead to a crash.
Avoid this, by explicitly checking in the ACK handler, if HW CSMA CA is
used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implemented blocking OpenThread otPlatRadioGetRssi api function using
no-blocking energy scan function from radio driver api interface.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
Counting how many times it went suspended, for how long on the last one
and on overage.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
End option indicates the end of the option list. Hence, correct way to
handle it is to break out of the option parsing routine.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
k_sleep() now takes a k_timeout_t so an integer value needs to be
wrapped through the appropriate macro, in this case K_SECONDS().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Verify that `ed_scan` is implemented by the radio driver before use. In
case it's not, return appropriate error code to OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
According to RFC 793 and IANA "TCP Option Kind Numbers" an option with
kind 0 is an End of Option List option and not a PAD.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify more strictly that data read from the transport fits into RX
buffer. Switch to unsigned integers, where possible, to prevent
unnecessary signed/unsigned operations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Such state needs to be set _from_ the PM API functions and not the other
way round. So if a network device driver does not support such API, it
will not be able to set the core net_if on PM state, obviously.
Currently, these functions only set/unset NET_IF_SUSPENDED flag.
More logic will be added later, to decide whether the net_if can be
actually set to suspend mode or not and also to take care of all timers
related to the interface.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function can be used for example by network power management
to check if the network interface can be suspended or not.
If there are network packets in transmit queue, then the network
interface cannot be suspended yet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to know whether the net_pkt was successfully placed
to transmit queue. It is possible in TX side, that the net_pkt
is already in TX queue when for example TCP packet is
re-transmitted, in which case the queue submit will fail.
This cannot happen in RX side as there are no timers involved.
It is required to check about such pending flag before trying to submit
it into the queue. Indeed, the work queue could be scheduled right after
such queuing, thus checking for the pending flag afterwards would
provide a false information.
It is unfortunate k_work_submit_to_queue() does not return anything as
it would simplify the code then.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case OPENTHREAD_NCP option is disabled, uart.c platform driver should
not be compiled as it misses dependencies.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When NCP starts-up some of the initialisation functions of a regular
OpenThread device do not need to be called, because they get triggered
by wpantund via UART. Instead NCP initialisation needs to be called.
A small typo has been fixed as well.
Also initialisation for raw link packet interface has been added. Can be
used for picking up 802.15.4 frames and interpreting them in the
application.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
The functions ppp_mgmt_raise_carrier_on/off_event() were not
implemented, but already documeted in the header net/ppp.h
Fixes#23420
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
ieee802154_scan() checks if ctx->scan_ctx (scan) is NULL what implies
that this can be true, but de-reference this variable before this
check what may cause a problem.
Fixes#23299 [3]
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
If the network interface is down, we should timeout properly
and let the application to handle the situation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that net_pkt will disappear while we are sending
it, so save link address if we need that information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are receiving UDP packet and if there is some error happening
inside zsock_recv_dgram(), then make sure that the net_pkt received
from recv_q is freed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was leaking memory in TX side when there was lot of
incoming packets. The reason was that the net_pkt_sent() flag
was manipulated in two threads which caused races. The solution
is to move the sent flag check only to tcp.c.
Fixes#23246
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The current design of the network-specific stack dumping APIs
is fundamentally unsafe. You cannot properly dump stack data
without information which is only available in the thread object.
In addition, this infrastructure is unnecessary. There is already
a core shell command which dumps stack information for all
active threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Contents of mqtt_3_1_0_proto_desc and mqtt_3_1_1_proto_desc were logged
with following code:
MQTT_TRC("Encoding Protocol Description. Str:%s Size:%08x.",
mqtt_proto_desc->utf8, mqtt_proto_desc->size);
This resulted in invalid log, since they were not NULL-terminated
strings. Use MQTT_UTF8_LITERAL() to initialize both utf8 strings to make
sure they are NULL-terminated now and valid to print and
log. Additionally this makes the code a bit shorter.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There are scenarios where there is a NAT firewall in between MQTT
client and server. In such case, the NAT TCP timeout may be shorter
than MQTT keepalive timeout and TCP timeout. The the MQTT ping
request message is dropped by the NAT firewall, so that it cannot be
received by the server, resulting in void MQTT ping response message.
There is no TCP FIN or RST at all. The application looks hang-up
until TCP timeout happens on the client side, which may take too
long.
Therefore, the event MQTT_EVT_PINGRESP is added to inform the
application that the route between client and server is still valid.
Signed-off-by: PK Chan <pak.kee.chan@nordicsemi.no>
This commit updates the the IPv4 ping command to handle the ENETUNREACH
error number returned by `net_icmpv4_send_echo_request` function when
IPv4 is unavailable.
The `net_icmpv4_send_echo_request` function previously returned EINVAL
when IPv4 is unavailable and this caused the shell command to report
"Invalid IP address" even when the provided IP address is correct; this
problem was corrected by returning ENETUNREACH instead of EINVAL in the
aforementioned function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
net_icmpv4_send_echo_request currently returns EINVAL (invalid
argument) when IPv4 is unavailable.
Since the availability of IPv4 has nothing to do with the arguments
provided to this function and the meaning of EINVAL in this case is
ambiguous, return the ENETUNREACH (network is unreachable) error
number instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The TCP connection might be concurrently modified from the
TR/TX threads, so add a mutex to protect from the concurrent
modification.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
After removing the test windows, update test protocol
functions for the TTCN-3 sanity check.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
These test receive windows were used by TTCN-3 sanity check,
but it's possible to do without them.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to drop dependency on a heap, drop the
test send window.
Use net_tcp_queue_data() to receive the outgoing data
from the socket layer.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to drop dependency on a heap, drop the test
receive window.
The receive window was needed for TTCN-3 sanity check,
but it's possible to do without it.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
On incoming SYN+ACK, use the existing TCP connection.
This problem was overlooked earlier and was found while
testing TCP2 client side.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In SYN_SENT check the ack number of the incoming TCP message
against our sequence number.
This problem was overlooked earlier and was found while
testing TCP2 client side.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Don't erroneously instantiate an extra TCP connection
on TCP connect.
This problem was overlooked earlier and found while testing
TCP2 client side.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
k_timer callback is executed from ISR context, which isn't
currenty compatible with Zephyr's shell implementation.
This problem was found while testing TCP2 client side.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support TTCN-3 based TCP2 sanity check,
register test inputs with net_conn_register() and adjust
test functions to account for this.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support IPv4/IPv6, work with packet through
net_pkt_ip_hdr_len(), net_pkt_ip_opts_len() which account
for IPv4/IPv6, IPv4 options and IPv6 extension headers.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Remove temporary interception of TCP, UDP for TTCN-3 based
TCP2 sanity check.
As a part of adding IPv6 support, TCP2 will register test
callbacks/inputs with net_conn_register().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Allocate tcp2.c endpoints before storing port numbers or addresses.
Select the IPv4 source address since net_context_create_ipv4_new()
is not currently called on packet output.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
NET_OFFLOAD interfaces do not handle ICMP request. Request to send ICMP
packet resulted in NULL pointer dereference in net_if_tx() later
on. Prevent that by detecting NET_OFFLOAD interfaces early in icmpv4
module.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
OpenThread has api to make use of radios energy scan feature.
Implemented this api in zephyr. This allows thread to perform energy
scan when needed.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
If the system has more than one network interface, then it should
be possible to bind a AF_PACKET socket to each interface if the
network interface index is set when bind() is called. This was
not possible earlier as the code was always using default network
interface with AF_PACKET socket bind().
Fixes#23153
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
According to LWM2M specification, when Queue Mode is used, the LWM2M
client should keep the reciever on for specified time after sending A
CoAP message. This commit adds a new LWM2M event,
`LWM2M_RD_CLIENT_EVENT_QUEUE_MODE_RX_OFF`, to facilitate the process by
notifying the application when it's safe to turn the receiver off.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Kconfig option to enable Queue Mode binding. With this option
enabled, the LWM2M client will register with `UQ` binding, instead of
`U`.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Calculate length based on provided SSID string, so user does not have to
provide length explicitly over shell.
This patch also removes requirement of minimum 3 characters SSID, as
the shortest SSID can be even 1 character.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Older OT code used preprocessor #if conditionals, while newer code
used IS_ENABLED macro. Unify the approach by switching to the latter
option.
Additinally, fix inclusion issue that came out after switching to
IS_ENABLED.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new transport handler for MQTT, with sendmsg-like functionality.
This allows TCP transport to send PUBLISH packets w/o fragmentation at
the TCP layer. Implement this new functionality for all existing
transports.
Fixes#22679
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`mqtt_transport_write` failue was logged with `errno` value which is not
correct as the return value from the function is valid in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This option specifies the name of the client.
See https://tools.ietf.org/html/rfc2132#section-3.14
This is useful for identification when looking in DHCP lease table.
Signed-off-by: Luuk Bosma <l.bosma@interay.com>
We now negotiate DNS servers in the IPCP configuration. This has been
observed to speed up the connection setup. The received DNS servers
are used by the DNS resolver library, but we leave it optional since
the static server list might be preferable.
Increase MAX_IPCP_OPTIONS to 4 so that we can nack all RFC 1877
options.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
It is not unusual that the peer does not provide an IP address in the
ipcp negotiation. But because ppp is a peer-to-peer protocol, we do
not actually need to know the peer's address to use the network.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
TLS sockets did not increase refcount of a net_context running TCP,
which could lead to a crash upon TCP disconnection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
opts_len renamed to total_opts_len in previous changes.
But it's not replaced at one place.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If IPv4 header options has wrong options length
(e.g. options length is more that actual data),
then parser decrements opts_len without checking
actual data length. Which crashes the network stack.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Store the time difference value in u32_t variable than
abs() value in signed variable.
Fixes#22912
Coverity CID: 208406
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_pkt_clone() initializes the original packet cursor
and clone the packet. But it doesn't restore the cursor
back to original position.
Issue noticed when mDNS resolving fails when mdns responder
is also enabled.
net_conn_input(), in case of multicast packet, connection
handler clone the packet and deliver to matching handler.
Example case: dns_resolver and mdns_responder both register
handlers for 5353 port. After first clone original packet
cursor moved back to starting position. But first cloned
packet cursor is set properly. Second time cloning makes
cursor position to set to zero. Which makes second packet
handler header unpacking goes wrong.
Fixes#21970.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If nack_idx > 0, then the count_rej must be > 0. This means that
the "code" variable will never be set to PPP_CONFIGURE_NACK.
Fixes#22436
Coverity-CID: 207975
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_PKT_RXTIME_STATS is set, then update the received
packet RX time for packet sockets (SOCK_RAW). This was already
working for normal sockets but the statistics update was missing
from SOCK_RAW.
Fixes#22489
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
commit e3dc05f14d ("net: config: Wait network interface to come up")
introduced check_interface() function, which accidentally has 2
different signatures depending on CONFIG_NET_NATIVE selection.
Let's fix the second signature to be correct.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/22693
Signed-off-by: Michael Scott <mike@foundries.io>
The zsock_accept_ctx() calls z_reserve_fd() on entry but fails
to call z_free_fd() on failure. This will leak the allocated
socket descriptor.
Fixes#22366
Signed-off-by: Inbar Anson Bratspiess <inbar.anson.bratspiess@330plus.net>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When is NET_SOCKETS_SOCKOPT_TLS set, it should set TLS_CREDENTIALS
even when NET_NATIVE=n, so that platforms that use socket offloading
can continue to set TLS credentials.
We are now setting this via 'imply' instead of 'select', so that
prj.conf can opt out if necessary.
Fixes#22390
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Instead of using a custom offloading interface, users can use
`NET_SOCKET_REGISTER` macro to register custom socket API provider. This
solution removes a limitation, that only one offloaded interface can be
registered and that it cannot be used together with native IP stack.
The only exception remainig are DNS releated operations -
`getaddrinfo`/`freeaddrinfo`, which, when offloaded, have to be
registered specifically.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Sort out mbedTLS dependencies in sockets Kconfig. mbedTLS will now
be enabled when TLS sockets and native network stack are enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Each network interface needs to have IPv6 link local address.
The ll address was not set to VLAN interfaces which then caused
some of the IPv6 neighbors to be in wrong state (INCOMPLETE) in
neighbor cache.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we are about to send a NS, we should not use the destination
address as that is typically the multicast address. We should use
the target address instead.
This fixes the case where a neighbor is in incomplete state, and
we send a neighbor solicitation to find out whether the neighbor
is reachable. In this case the destination address is the solicited
node multicast address which is no use when trying to figure out
the source address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes a problem where our own IP address
is added to the cache instead of the senders.
This bug was due to a swap of the address in the original packet.
The swapping of the address is now removed.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Users of mqtt_live() have no idea when it actually sends a ping.
As a result it's very hard to know when to use mqtt_input() to
process the incoming PINGACK.
Instead of returning a 0 result when a ping isn't generated in
mqtt_live(), let's return -EAGAIN.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that if we receive websocket data in small chunks,
the parsing and returning of data to caller is done properly.
Fixes#21989
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Store the IPv4 address into the local LCP options and set it
as the interface IP address once IPCP negotiation is complete.
Fix calling the correct function when an IPCP Configure Reject
is received carrying our local IP address.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The MQTT connection is closed in case an mqtt_ping fails anyway, so
it's better to let the application know early that something went
wrong.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As mDNS requests set DNS id to 0, we cannot use it to match
the DNS response packet. In order to allow this functionality,
create a hash from query name and type, and use that together
with DNS id to match request and response.
Fixes#21914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A neighbor solicitation packet for an address that is not ours should
not cause the sender to be added to the neighbor cache. See RFC 4861
section 7.2.3.
Add the neighbor to the cache when we have decided to respond to the
NS packet.
Fixes#21869.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Use the same code when parsing source link-layer address option for
both RA and NS packets. It looked like handle_ns_neighbor() could
actually read too much data into lladdr.addr when handling 8-byte
addresses (802.15.4).
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Make ioctl handlers of `ZFD_IOCTL_POLL_PREPARE` and
`ZFD_IOCTL_POLL_UPDATE` return an error code instead of setting errno
variable.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A memory corruption could happen in `uncompress_IPHC_header` function,
when data was moved to make place in the net buffer for the uncompressed
IPv6/UDP header.
The size of data being moved should only contain the original data size,
not incremented by the amount of space needed to expand the header,
which was already added to the net buffer size. In result, the `memmove`
operation could exceed the allocated net buffer and cause memory
corruption.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If no other route is found, the network interface prefixes are
evaluated. If a matching interface is found, the packet is sent out on
this interface.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The address family of the received packet must be set, before routing
it. E.g. the ethernet driver would drop the packet if this is not
done.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Add function that returns remaining time until next keep alive message
shall be sent. Such function could be used for instance as a source
for `poll` timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The transition from LISTEN to SYN_SENT nullifies the th,
guard on th being NULL in SYN_SENT.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In case the final ACK for the connection establishment arrives
out of order, evaluate the sequence number in SYN_RECEIVED,
so the data packet isn't false identified as a final ACK.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to simplify the evaluation of the incoming data,
add len and evaluate the data for the incoming packet once.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Create a new connection only for the SYN packet,
otherwise pass a packet into existing connection.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The initial logic with this check is too restrictive,
do not bail-out on unconsumed flags.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add a diagnostic information on network buffer sizes
and the total length of the packet.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Set the net_context to NET_CONTEXT_CONNECTED state only once
in transitions to TCP_ESTABLISHED.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
1. Reduce the internal buffer
2. Eliminate extra string pointer
3. Add a comment on deleting the last comma
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to avoid naming collision with tcp_recv(),
rename tcp_recv() into tp_tcp_recv().
This function is used by the test protocol.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
After sending the MQTT disconnect message, no response is expected,
therefore it makes little sense to delay the socket closure.
So far it was expected to call `mqtt_input` function after calling
`mqtt_disconnect` in order to close the socket, which is
counter-intuitive. Simplify this, by closing the socket rightaway
in the `mqtt_disconnect` function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove net bufs own assertion mechanism and use the system assert
instead. This changes the assertion messaged printed from printing
expression to printing the line and file name. This provides more
context as the same expression could be asserted upon multiple times and
would then not provide enough clarity in the message.
This removes the option to enable only net buf assertions.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Drop snprintf() and use snprintk() as snprintk()
is more suitable for the networking code.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
NET_BUF_ASSERT() tranlates into nothing in presence
of CONFIG_ASSERT=y, which is misleading.
Use __ASSERT() in NET_BUF_ASSERT().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
No packet was previously sent, because net_pkt_set_ppp(pkt, true) was
not called on the outgoing packet. Also the received protocol instead of
LCP was used, which was incorrectly interpreted by remote peer.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Received net_pkt is always discarded in ppp_recv() if we return
NET_OK. Don't do this in ppp_fsm_recv_discard_req().
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When iterating though configuration options it is possible that we will
fail to add data to nack_buf and hence unref it in error handling
path. Just after that we will unref buf, which has nack_buf in its
buffer chain.
Drop code unrefing nack_buf and just go directly to unrefing buf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is no possibility right now that 'nack == NULL' and 'nack_buf !=
NULL', so drop code path for that case.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If we can write to the socket in POLLOUT, then there is no need to
wait.
Note that this is not a full POLLOUT implementation but prevents
the code from waiting even if we could send data out.
Fixes#18867
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Same deal as in commit 41713244b3 ("kconfig: Remove '# Hidden' comments
on promptless symbols"). I forgot to do a case-insensitive search.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Make the channel ops struct const since there really isn't anything
there that needs to change at runtime. The only exception is the L2CAP
shell which was playing with the recv callback, however that can be
fixed by introducing a simple bool variable.
With tests/bluetooth/shell this reduces RAM consumption by 112 bytes
while adding only 16 bytes to flash consumption.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Maintain a simple count of how many PINGREQ have been sent for the
current connection that have not had a corresponding PINGRESP. Nothing
is done with this information internal to the MQTT driver, but it is
exposed to the application layer to monitor as desired.
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
The commit 8892406c1d ("kernel/sys_clock.h: Deprecate and convert
uses of old conversions") changed code to not use deprecated macro.
Unfortunately there was some changes done to RX TC stats update that
were missing from that commit. This commit fixes the issue and removes
the last user of the deprecated SYS_CLOCK_HW_CYCLES_TO_NS64() macro.
This is follow up to commit 5bbdf56769 ("net: stats: Fix RX time
statistics update") which failed to remove all users of the deprecated
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Based on work by Michael Scott.
Add a new Kconfig knob, CONFIG_LWM2M_IPSO_TIMESTAMP_EXTENSIONS. This
defaults to n. When enabled, various IPSO objects will by default have
the timestamp resource (5518) added to their representations. This can
be turned off on a per-object basis.
The idea of adding timestamp resources was originally suggested by
Hannes Tschofenig on this OMA page:
https://github.com/OpenMobileAlliance/OMA_LwM2M_for_Developers/issues/429
Signed-off-by: Michael Scott <mike@foundries.io>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The commit 8892406c1d ("kernel/sys_clock.h: Deprecate and convert
uses of old conversions") changed code to not use deprecated macro.
Unfortunately there was some changes done to RX stats update that were
missing from that commit. This commit fixes the issue and removes use
of the deprecated SYS_CLOCK_HW_CYCLES_TO_NS64() macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Follwing the convention in Zephyr, all CMake configuration related to
a module, should be placed within the module repostiory.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Timestamp and RecordRoute options are supported
in only ICMPv4 EchoRequest call as per
RFC 1122 3.2.2.6.
Fixes#14668
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
IPv4 header options length will be stored in ipv4_opts_len
in net_pkt structure. Now IPv4 header length will be in
net_pkt ip_hdr_len + ipv4_opts_len. So modified relevant
places of ip header length calculation for IPv4.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
OpenThread recently introduced CMake build system into its repostiory
so we no longer need autotools to build OpenThread libraries and can
integrate them natively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TCP code expects that we know when the socket has called accept()
in order to continue connection attempt.
Fixes#21335
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Packets shall never fail to be sent now that they are queued, so if an
error occured there is no point in keep the channel connected.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Functions like `setup_ipv4` or `setup_ipv6` might already use the
`counter` semaphore, therefore it should be initialized before these
functions are called.
As a result of this issue, the network stack could stall until timeout
under certain circumstances (e.g. when OpenThread was used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
An expired IPv6 router would cause an infinite loop where
iface_router_run_timer() repeatedly scheduled a work item. In some
conditions it would schedule with negative delay, in other conditions
the infinite loop wouldn't happen until a router was added again.
Get rid of the router from active_router_timers when it is removed.
Fixes#21339
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Without this fix is it not possible to terminate pppd and restart
pppd afterwards without restarting the firmware, too.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Without this fix is it not possible to terminate pppd and restart
pppd afterwards without restarting the firmware, too.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This adds net_bug_simple_init_with_data which can be used to initialize
a net_buf_simple pointer with an external data pointer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Before we try to set IP addresses to the network interface,
make sure that the interface is up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow to select Sleepy End Device, and configure it during OpenThread
initialization.
According to Thread Specification, Sleepy End Devices should always
attach to the network as SED, to indicate increased buffer requirement
to a parent. Therefore, we reconfigure the Link Mode on each boot.
Note, that Poll Period value is not stored in the persistent storage,
hence we also need to initialize it on each boot.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread radio layer did not implement `ieee802154_radio_handle_ack`
API and provided fake ACK frame to the OpenThread.
This prevented proper Sleepy End Device operation, as it expects to
receive information in the ACK whether it should wait for more data to
come or should it put the radio to sleep.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The time difference calculation did not check if the result
value would be < 0 which means really large value when converted
to unsigned.
Fixes#20100
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For 32-bit architecture Bluetooth only requires 4 bytes for the user
data. There are places that store a pointer in it, so we need to make
an exception for 64-bit architecture. The code contains relevant build
asserts, so it's sufficient to set a conditional default in Kconfig
but let the range definition be simpler (unconditional).
Also simplify & fix the conditional defaults & ranges. E.g. separately
mentioning X86_64 is redundant since that option explicitly selects
the 64BIT option.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an implementation for `sendmsg`, so secure sockets can be used
together with the WebSocket module to implement secure WebSockets
("wss").
Fixes#20431
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This commit adds a NULL pointer check for the destination
context pointer. The pointer is NULL in case the context
does not exist.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Setting it to UINT32_MAX, as it is subsequently overwritten with
MIN(oldest, something_else).
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit 106a0f7306 ("net: lib: config: Add SYS_INIT handler to
set clock from SNTP"), never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In order to avoid net_pkt ref count going to <0, do not unref
the packet if it was not sent in the first place. This can happen
if the connection was closed while we are waiting packets to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not print warning if transitioning from LISTEN -> CLOSED which
happens when the socket is closed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The initial state from CLOSED -> ESTABLISHED caused error
to be printed by state validator. This is unnecessary, so add
this as a valid state to validator.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Handle this corner case with TCP connection closing:
1) Client A connects, it is accepted and can send data to us
2) Client B connects, the application needs to call accept()
before we will receive any data from client A to the application.
The app has not yet called accept() at this point (for
whatever reason).
3) Client B then disconnects and we receive FIN. The connection
cleanup is a bit tricky as the client is in half-connected state
meaning that the connection is in established state but the
accept_q in socket queue contains still data which needs to be
cleared.
4) Client A then disconnects, all data is sent etc
The above was not working correctly as the system did not handle the
step 3) properly. The client B was accepted in the application even
if the connection was closing.
After this commit, the commit called "net: tcp: Accept connections
only in LISTENING state" and related other commits are no longer
needed and are reverted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add CONFIG_NET_TCP_AUTO_ACCEPT option which can be used to
automatically accept incoming data connection even if the
application has not yet called accept(). This can speed up
data transfer from peer to the application.
Problem with this is that if the peer sends lot of data and
we have limited amount of net_buf's available, then we can
run out of them which is very bad situation and can lead to
deadlocks. Because of this, the setting is turned off by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit d70a854904.
The next commit fixes the original issue so this commit is no
longer needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this feature enabled (via CONFIG_NET_CONFIG_CLOCK_SNTP_INIT), an
application will automagically get correct absolute time via POSIX
functions like time(), gettimeofday(), etc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use the newest version of the OpenThread project, as updated in
https://github.com/zephyrproject-rtos/openthread/pull/2.
Introduce the following fixes along with the update (they're squashed to
retain bisectability of OT samples):
* Update configs and flags used
Some OT configs were renamed, some new were introduced that Zephyr port
needs to set.
* Add entropy platform driver
OpenThreads `random` platform subsystem was replaced with `entropy`
subsystem which is supposed to serve as an entropy source for the
generic OpenThread's random generator.
* Halt OT thread when OT command is processed
OpenThread can currently be processed from two threads - a
genuine OpenThread thread and shell thread, which processes CLI
commands. This could cause trouble, when context was switched
during OT command processing (i.e. switched to process an incomming OT
message, while still in unfinished command handler).
In result, it was not possible to turn the commissioner role on via
CLI, as the commissioner petition response was handled before the
Commissioner::Start function finished its execution (if the
petitioner is also the network leader, all messages are passed
internally within the stack).
Fix this by suspending the OT thread for the time of an OT command
processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to properly remove struct tcp and its data, net_context
needs to be supplied as k_timer user data. Modify net_tcp_unref()
to take a net_context argument when removing, and add ifdefs
around code that after this will only be used by TCP testing
functionality.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add a net_context backpointer and receiver user data to the tcp
structure. Once the desired callback and user data is set in
net_tcp_recv(), net_context_packet_received() can be called at
TCP reception in tcp_data_get(), moving the TCP data to the
recipient. IP and TCP protocol headers are sent as NULL, they
are not used by e.g. the socket code.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Since TCP needs to be able to decide how much data is to be sent
in a TCP segment and when the segment needs to be sent, the TCP
data buffer needs to be passed down to the TCP stack. For tcp2
this causes a new function handling the data as a buffer or as an
iov to be implemented and only that function is called when
sending data out via the new TCP stack. net_tcp_send_data() is
invoked as the caller expects to be informed when the data has
been sent.
For the current stack keep the sending functions as is.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Register the TCP connection when accept() and connect() is called.
With the connection registration net_context will have the necessary
callback pointer set up, whereby net_context can call the proper
function when receiving packets for the TCP connecton.
With the new TCP stack this callback is always the same function.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Currently the TCP commands work only for legacy TCP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Applications should use setsockopt() to setup the SOCKS5 proxy,
so the old API file, which is using net_context directly, is
moved SOCKS5 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix GCC "warning: 'ipv4' defined but not used [-Wunused-variable]" and
"warning: 'ipv6' defined but not used [-Wunused-variable]" when either
IPv4 or IPv6 support is not enabled.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Use sys_put_xyz() helpers instead of memcpy() whenever possible. This
brings in straight-line inline code for pushes and adds of known,
small sizes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
On processing a DNS server option, which re-initializes the DNS resolve
context, also cancel all pending DNS queries before closing the old DNS
resolve context. Otherwise, `z_clock_announce()` will later work on the
re-initialized context once the queries expire and crash because the
reference to the timeout function `query_timeout()` has been cleared.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use same format string when printing information that certain
config option is not enabled. This saves some flash as the
same string can be shared in the shell.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT is unused since commit 54c10c04e5
("net: lwm2m: use security data for connections").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit d1cb39e7ce ("net: lwm2m: migrate LwM2M library to
BSD-sockets API").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The earlier code was always queuing the FIN that is sent when
connection is closed. This caused long delay (200 ms) before the peer at
the other end noticed that the connection was actually closed.
Now check if there is nothing in the queue, then send the FIN
immediately. If there is some data in the queue, flush it when a valid
ack has been received.
Fixes#19678
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With `CONFIG_NET_NATIVE`, offloaded drivers can specify capabilites with
`NET_IPV4/6` configs, so there is no longer need to handle socket
offloading separately.
Also, initialize hints structure with zeros, as according to man pages
unused fields should be set to 0:
`All the other fields in the structure pointed to by hints must contain
either 0 or a NULL pointer, as appropriate.`
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new config option `LWM2M_DNS_SUPPORT` to the LWM2M library, instead
of relying on `DNS_RESOLVER` which is only compatible with native
network stack. This allows to use DNS with offloaded interfaces
seamlessly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is related to commit 1a6f4a6368 ("net: tcp: Accept
connections only in LISTENING state") which made the system
to only accept new connections if the application had called
accept(). Unfortunately the TLS accept was not fixed by that
commit so we were in wrong state when accepting TLS sockets.
This commit fixes that issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A socket-offloaded interface should bypass interface initialization in
the same way as net-offloaded interface does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This function will be useful in shell when we want to monitor
the amount of bytes transferred and want to clear earlier
statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
application to the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
application to the network device driver. The data is calculated
for all network packets and not just for UDP or TCP ones like in
RX statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
network device driver to the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Send a Echo-Reply to every Echo-Request. This code does not verify
if the ppp stm is in LCP Opened state. See rfc1661 section 5.8.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Try to figure out where the ping reply should be sent if there
are multiple network interfaces in the system.
Fixes#19612
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The MQTT transport API functions are already documented in
mqtt_transport.h so need to duplicate them in individual
transport .c file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Randomly generating ID the first time coap_next_id() is called is more
in accordance with CoAP recommendations (see
https://tools.ietf.org/html/draft-ietf-core-coap-18, section 4.4)
"It is strongly recommended that the initial value of the
variable (e.g., on startup) be randomized, in order to make successful
off-path attacks on the protocol less likely."
Doing this in a dedicated init function is the cleanest and most
idiomatic approach. This init function is not exposed publically which
means it will be called only once, by the network stack init procedure.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Provides a way to clone a net_buf_simple without altering the state of
the original buffer. The primary usage scenario is for manipulating a
previously allocated PDU inside a buffer without altering the length and
offset of the buffer.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
create_ipv6_answer() function is behind #define's but get used behind
IS_ENABLED(CONFIG_NET_IPV6), which is not allowed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The callback function has been ignored in z_timeout_init() since the
timer rework in fall 2018. Passing real handlers to it in code is
distracting when they will be overridden by whatever callback is
provided in z_add_timeout().
As this function is an internal API deprecation is not necessary.
Remove the parameter and change all call sites to drop the argument.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Cast a %lld argument to long long int. This is causing warnings on
recent GNU Arm Embedded toolchains, which fail the build with
-Werror=format=.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
* The issue is found in supporting offload module esp8266
* For device like esp8266, it's responsible for tcp/udp handling,
no need of net_tcp related functions
* This commit is only tested for esp8266, no gurantee for other
modules
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Currently the CONFIG_NET_ROUTING option has limited use as there
would be some entity that populates routing table. Previously it
was RPL that did it but RPL support was removed some time ago.
Fixes#16320
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are getting an old net_context, clear the content of it
in order to make sure we do not have old data in it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not try to re-use net_context.user_data field as in many places
(like in accept) it is expected to contain pointer to net_context.
Storing the socket flags will corrupt the value. To simplify and
make things less error prone, use socket specific field in net_context
to store the socket flags.
Fixes#19191
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far OpenThread compiled it's own, internal copy of mbedTLS library.
This commit changes this behavior by using Zephyr's mbedTLS instance
appropriately configured for OpenThread needs.
Generic mbedTLS config file was used in this case, so that application
can still configure remaining parts of mbedTLS for it's own needs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The socket flags are stored in void* so we need to use uintptr_t
instead of u32_t when manipulating the flag variable.
Fixes#19181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to make sure that net_pkt_clone() sets cursor correctly.
This cursor position is needed so that we can skip IP header
for incoming packet properly. Not all applications need to know
the cursor position of the cloned packet. Unfortunately we cannot
know that in advance so just set the cursor to correct position in
the cloned packet.
Fixes#19135
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If socket is marked non-blocking, then accept() will return immediately
if there is no one connecting.
Fixes#19103
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SNTP is UDP-based protocol, and thus not reliable. Previously,
high-level aka "simple" SNTP just issues a single request via
the low-level SNTP API. Instead, send multiple requests, starting
with a small timeout, and exponential backoff, repeated within
timeout specified by user in call to sntp_simple().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we receive a multicast IPv4 or IPv6 packet, then we need to
deliver it to all sockets that have installed a handler for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, they were tested only with CONFIG_NET_SOCKETS_POSIX_NAMES,
but should also work with POSIX subsys. Achieve this by including POSIX
headers in this case.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If proto field in socket() call is set to 0, then we should have
a sane default for it that depends on the type of the socket.
Fixes#18873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The semi-automated API changes weren't checkpatch aware. Fix up
whitespace warnings that snuck into the previous patches. Really this
should be squashed, but that's somewhat difficult given the structure
of the series.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These calls are buildable on common sanitycheck platforms, but are not
invoked at runtime in any tests accessible to CI. The changes are
mostly mechanical, so the risk is low, but this commit is separated
from the main API change to allow for more careful review.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If we are returned IPv4 address but the hints says IPv6, then
return error as currently we do not support AI_V4MAPPED addresses.
Same check for IPv6 if we want only IPv4 address.
Fixes#18870
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Issue noticed with following scenario.
1) TCP server is listening for connections but will handle
only one connection at a time (e.g. echo-server sample)
2) Client A connects, and the connection is accepted.
3) Client B connects, instead of denying a connection,
it is "auto" accepted (this is the actual bug) even
if the application has not called accept().
4) After the connection A is closed, the connection B
gets accepted by application but now the closed
connection A will cause confusion in the net-stack
5) This confusion can cause memory leak or double free
in the TCP core.
It is not easy to trigger this issue because it depends
on timing of the connections A & B.
Fixes: #18308
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If we are closing connection before the connection was established,
then unref the context so that the cleanup is done properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds an explicit inclusion of toolchain.h from
ieee802154_frame.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by
ieee802154_frame.h; these being not defined can easily go unnoticed and
cause unexpected behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
When using offloaded network, an L2 is never assigned to the net_if.
Only certain portions of the net_if code are referenced such as:
net_if_up()
net_if_down()
And these functions make use of several L2 references:
get_flags()
enable()
Let's add checks to make sure we don't deref a NULL when using these
functions.
Fixes the following exception on K64F and other HW which can make
use of offloaded network HW:
FATAL: ***** Reserved Exception ( -16) *****
FATAL: r0/a1: 0x00000010 r1/a2: 0x0000644f r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x2000474c r14/lr: 0x0001475b
FATAL: xpsr: 0x00000000
FATAL: Faulting instruction address (r15/pc): 0x0001b1cd
FATAL: >>> ZEPHYR FATAL ERROR 0: CPU exception
FATAL: Current thread: 0x20004c4c (unknown)
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18957
Signed-off-by: Michael Scott <mike@foundries.io>
Corrected the amount of bytes copied for port handling in parse_ipv6
to prevent reading past the boundaries of the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Add new RD Client API of lwm2m_rd_client_stop() for this
Fix issues of de-register and event reporting in RD Client
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
The LwM2M implementation for DNS resolving has checks which
configure hints based on whether IPv4 or IPv6 are enabled.
Neither of them need enabled if using NET_SOCKETS_OFFLOAD,
which then causes an error to be returned to due to
"hints.ai_family" not being set.
Also the offload API need to know when to free the allocated
"struct addrinfo" instead of calling free() generically,
thus let's use the freeaddrinfo() API for sockets which will
call into the offload API if needed.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18765
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
When the firmware_pull mechansim sends the callback to notify the
sample of a new firmware block, the user supplied buffer can be
smaller than the CoAP BLOCK_SIZE setting. To handle this case,
we loop through the payload and fill the user supplied buffer with
smaller chunks.
Unfortunately, the last_block calculation is done outside this loop
which causes several callbacks (while in this loop) to have
last_block true. Let's fix this by adding a small check to make
sure we're at the end of the current payload block before notifying
the user of a last_block.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16158
Signed-off-by: Michael Scott <mike@foundries.io>
The mDNS packet receive had issues:
* The DNS id needs to be 0 for both sending and receiving, we did
not accepted 0 incoming id.
* The mDNS response does not have any questions in it so we just
need to skip the question count checks in response.
* Skip the Cache-Flush bit in Class field so that we can properly
parse CLASS_IN value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In DNS server init, print information whether the DNS server
is mDNS or LLMNR one. This way we do not need to remember what
IP addresses are used either of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The source UDP port in all Multicast DNS responses MUST be 5353
as described in RFC 6762 chapter 6.
Fixes#18732
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure we use the IPv4 event command when checking IPv4 address
add or delete instead of event mask.
Coverity-CID: 203483
Fixes#18400
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When val1 is 0, we need to handle a negative val2 value so that we
generate correct TLV value.
Example: val1 = 0, val2 = -500000 is equivalent to -0.5 decimal.
Currently we generate: 0.5 (losing the sign).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
Current JSON formatting for float32/64 is broken in a similar way as
plain text. Let's use the newly fixed logic for plain text to
generate the float32/64 values in the JSON string.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
We can use the plain text float32/64 formatter for JSON as well, so
let's expose the put_float32/64 functions.
Signed-off-by: Michael Scott <mike@foundries.io>
Formatting a float32/64 value for plain text is broken.
Example for 32bit: val1=0 and val2=500000 is equivalent to 0.5
Current formatter was using %d.%d (%lld.%lld for 64bit) so
exported value was 0.500000 (or 0.5)
To fix this, for val2 use a zero-padded formatter for the maximum
length of each bit length (6 for 32bit and 9 for 64bit), and then
remove the zero characters at the end of the string.
Notes re: handling of val1/val2 signs:
- eliminate potential negative sign when converting val2 to avoid:
a value like: 0.-5
- use negative val2 when val1 is 0 to fix small negative handling
such as -0.5
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
Do not try to memcpy() the same buffer to itself.
This one also reverts commit 112ecb7290
("net: gptp: Fix for coverity CIDs 203471 and 203464") as that
did not fully fix the issue.
Coverity-CID: 203464
Coverity-CID: 203471
Fixes#18394
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the extension, like HBHO, sub-option length is
not too large.
Fixes#16323
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When the bootstrap support was added, it looks like I somehow missed
the handling block in the engine.
Let's add it now to fix boostrap support.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18080
Signed-off-by: Michael Scott <mike@foundries.io>
- LWM2M_SECURITY_INSTANCE_COUNT wasn't following the standard of
having the unconditional default in the last position
- LWM2M_SERVER_INSTANCE_COUNT needs another instance when
bootstrap is enabled.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M boostrap support is enabled via the config option:
LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP. If enabled, this config sets
the default # of server and security instances. However, this is
not working correctly because LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP
is defined below it's uses in the Kconfig file.
Let's move the RD_CLIENT configs higher in the Kconfig to fix this
behavior.
Signed-off-by: Michael Scott <mike@foundries.io>
If no challenger went to replace the best port/vector, then the best
port is still the global_ds and thus point to the same memory: no need
to update the global_ds then.
Coverity-CID: 203471
Coverity-CID: 203464
Fixes#18395
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Looks like the logic to count rejection is missing. Removing count_rej
variable, and set a comment about initializing the code to the right
value once this logic will be in.
Coverity-CID: 203514
Fixes#18398
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Simplify algorithm to skip (aka calculate length) of encoded domain
name in a DNS answer. Now it's fully compliant to RFC 1035 regarding
handling of compressed FQDNs. Additionally, bounds checking is now
performed by the parsing code.
Fixes: #18334
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203397
Fixes#18419
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203468
Fixes#18420
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 connection management status is stored in wrong
variable. ip_state should hold the status and then
it should be stored in state variable.
Fixes#18253
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When checking for total IP address counts, don't check
CONFIG_NET_IF_MAX_IPV6_COUNT twice. This was a typo for
CONFIG_NET_IF_MAX_IPV4_COUNT.
This was reported by IRC user: retfie
Signed-off-by: Michael Scott <mike@foundries.io>
This commit changes the Link-Layer Address Option length calculation
from hardcoded values to a numerical rounding up to full 8.
The length is calculated according to rfc4861 section 4.6.1.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
If the UDP socket is connected, then allow the user to leave
out the remote address in msghdr struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Commands were not gathered with the right macro
- bus fault access due to wrong declaration of iface_states external
variable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The network to host byte order conversion is actually in place
on the network buffer. This prevents the reuse and forwarding of
RA packets. This commit uses temporary variables instead.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds support for a 6LoCAN Ethernet border translator.
CAN frames with the translator CAN address are translated and forwarded
to Ethernet. Ethernet frames with the first 34 bits matching the MAC
address of the translator are translated and forwarded to 6LoCAN.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Take the targer link layer address option link laxer addres lenght
from net packets source addres instead if the interface.
This is usefull for 6LoCAN border translator (6LoCAN to Ethernet).
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit implements net_pkt_shallow_clone. A shallow clone clones
the net_pkt but not the buffers. The buffers are only referenced and
therefor only freed when both copies of the net_pkt are freed.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commits adds support for reception of packets thats comes from
a Ethernet to 6LoCAN translator. This packets carry the Ethernet
MAC address (6 bytes) inline in the FF (First Frame).
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
If sendmsg() is used for TCP sockets, the msghdr->msg_name is not
really used as the socket must already have been connected.
In that case just get the destination address directly from
net_context remote address field.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Before calling socket callback function, make sure the callback
function exists so that we do not get NULL pointer reference.
Fixes#18021
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is related to findings in #17997 and changes network related
header files to have include files outside of extern "C" { } block.
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current SOCKS5 based connections in mqtt are only
TCP (nonsecure) based. To support TLS based SOCKS5
connections, new methods needs to be introduced.
Instead, removed CONFIG_MQTT_LIB_SOCKS based implementation.
And now mqtt provides an api to set proxy
(mqtt_client_set_proxy()) details. That's enough,
socket layer will take care of making connections through
proxy server.
Fixes: #17037
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current SOCKS5 implementation is above socket level and every
higher layer protocol or application level needs to have
SOCKS5 related changes. This solution is based on socket
setsockopt(). Application caller has to set proxy details
through setsockopt() and socket:connect() will take care
creating connection.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The SO_SOCKS5 socket option can be used by the application to
set the SOCKS5 proxy details. These details will be used when
connecting to peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Several problems with memset usage in the LwM2M subsystem were
identified:
- Every single object that can have multiple instances is using
memset to initialize static resource data during init. This data
will already be set to 0 because it is static, so the memset
statements are unneeded.
- Instead of using memset during object init which is only called
one time during kernel startup, let's add a memset to the
object create function to ensure the resource data is cleared out.
It could have been used prior and then released via a DELETE op.
- the IPSO Timer object was setting a lot of data structure members
to 0 in the create function. Let's do 1 memset on the entire
structure and then only the non-zero values afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
When presenting errors in lwm2m_engine_set() let's include the related
LwM2M path for easier debugging.
Signed-off-by: Michael Scott <mike@foundries.io>
This core LwM2M Object enables monitoring of parameters related to
network connectivity.
This is only the basic object structure. More work will be needed
to set the various resources based on connectivity.
Signed-off-by: Michael Scott <mike@foundries.io>
This Object is used to report the state of a momentary action push
button control and to count the number of times the control has
been operated since the last observation.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M allows for multiple instance resources such the power source
resources in the device object. These types of resources have
always been very hard to work with, and frankly were poorly
implemented.
This led to other issues where it was very hard to have
non-sequential resource instances, and each resource of this type
needed special getter / setter methods such as:
lwm2m_device_add_pwrsrc()
lwm2m_device_set_pwrsrc_voltage_mv()
Going forward, as more LwM2M objects are implemented this just
doesn't scale well.
To fix this:
- split the resource instance data out from the resource data.
This includes the data pointer information and resource
instance id.
- add resource id and resource instance id to the event callback
functions so user's can see in more detail what resources and
resource instances are being handled.
- allow generic functions like lwm2m_engine_get_*() and
lwm2m_engine_set_*() to access resource instance data.
- adjust object resource initialization macros to map resource
instances to resources at the time of object instance
creation.
- fix up the lwm2m_client as a reflection of all of these changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Due to work combining data into the lwm2m_message structure, we no
longer need to pass the lwm2m_engine_obj parameter between
formatters and most of the operation handlers.
So, let's remove it.
Signed-off-by: Michael Scott <mike@foundries.io>
The multi_max_count is no longer used and can be removed from the
obj_field structure if we change all of the OBJ_FIELD() macros to
use OBJ_FIELD_DATA() instead.
Technically, OBJ_FIELD() and OBJ_FIELD_DATA() are now the same, but
we're keeping them both for the time being. In the future, more
fields may be added to the obj_field structure and we can use the
OBJ_FIELD() macro again if that's the case.
Signed-off-by: Michael Scott <mike@foundries.io>
- Several of the functions use "path" as the parameter name for the
string-based LwM2M path. Let's clarify by using "pathstr".
- Recent updates to the LwM2M engine now support resource instances
when parsing the LwM2M path. Let's update descriptions accordingly.
Signed-off-by: Michael Scott <mike@foundries.io>
Per IPSO Light Control definition from the OMA LwM2M registry:
http://www.openmobilealliance.org/tech/profiles/lwm2m/3311.xml
There is an optional "Application Type" string resource (5750) in the
Light Control object. This was missed in the initial implementation.
NOTE: sample will assign reference if needed.
Signed-off-by: Michael Scott <mike@foundries.io>
We are pre-allocating a storage variable for the application type
resource in the IPSO Timer object. This is an optional resource
which won't always be set by samples.
Let's leave out the pre-allocated variable and let the sample set
this reference if needed (it's optional).
Signed-off-by: Michael Scott <mike@foundries.io>
Server records contain the default PMIN and PMAX settings for how
often we can send observe notifications. We are currently using
arbitrary defaults which cannot be changed when compiled or
during runtime.
Let's add Kconfig settings for the default settings to use and
also lookup the current values in the active server record when
an observe is added.
The actual PMIN/PMAX values can still be set via WRITE_ATTRIBUTE
operation.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently the retransmit_work is not cancelled when closing a context,
making it operate on an invalid context.
LwM2M RD client also closes the context and initializes it again when
registration with the server fails, overwriting the active timeout and
breaking the timeout dlist.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
We must discard the received Discard-Request silently.
See RFC 1661 chapter 5.9 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only net-shell calls net_ppp_ping() command, so make
it return the amount of time that it took to receive Echo-Reply
so the net-shell can print the round trip time value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network interface is point-to-point one which does
not need IP address etc, then no need to start DAD etc for
those interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a protocol that we do not currently handle, then
return Protocol-Reject to peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default PPP is started immediately when the network interface
goes up. This can be problematic especially when debugging the beast
so allow user to delay the startup.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch tries to avoid memmoves and buffer allocations when there
is enough space in the original buffer. Headers are still contiguous
but not in the same buffer.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This is a rework of the 6lo IPHC uncompression.
The uncompression now tries to work in place on the original buffer
instead of allocation a new one. If there is not enough tail-room,
a new buffer is allocated and filled with the IP and maybe UDP header.
The compressed header is pulled from the original buffer and the
buffer is preserved.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
When net_pkt_skip skips the entire data in a net buffer, the cursor
still points to this buffer on data that is off by one.
Calling pkt_cursor_advance in net_pkt_is_contiguous fixes this and
moves the cursor to the next buffer.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This is a rework of the 6lo IPHC. The compression now works inline
on the original buffer instead of allocation a new one.
Additionally DAM_11 (Destination address fully elided) has precedence
over DAM_10 (16 bit compressible) now.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Move CMake ExternalProject integration of OpenThread to the
CMakeLists.txt file within the OpenThread fork.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add BSD socket sendmsg() API that can be used to send data to peer
and also pass ancillary data to lower level of the network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User could have set something to optval in getsockopt() and we
need to copy the data to kernel optval so that the socket family
code can use the value for something.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the allocated net_pkt is larger than the network interface MTU,
then check if the IPv6 fragmentation is enabled and allow larger
net_pkt length as the IPv6 fragmentation will split the packet into
suitable parts.
Fixes#16354
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_pkt_pull() needs to move all the remaining data in the
net_buf instead of just the pull amount.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Certain Thread implementations (notably ARMs) require a DHCPv6
implementation.
Allow the usage of the relevant OpenThread configuration parameters in
Zephyr.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Bluetooth address parsing has been duplicated across the different
sub-shell files. Also missing parsing of identity/resolved addresses.
Move parsing of string close to parsing to string for a symmetrical API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move duplicate hex2bin and add bin2hex function so that application can
use the functions and avoid code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
It currently only listens to relevant events about network interface to
decide whether raising connected or disconnected event.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current implementation of LwM2M engine doesn't allow users a way
of overriding TLS credential load with custom function. This
would be needed by an offloaded TLS stack where we don't want
to use standard Zephyr functions.
Let's add a load_credential function pointer to the LwM2M client
context which will be called when it's available.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17408
Signed-off-by: Michael Scott <mike@foundries.io>
Let's remove depends on NET_LLDP from all the options. It avoids this:
# CONFIG_NET_LLDP is not set
# CONFIG_NET_LLDP_LOG_LEVEL_OFF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_ERR is not set
# CONFIG_NET_LLDP_LOG_LEVEL_WRN is not set
# CONFIG_NET_LLDP_LOG_LEVEL_INF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_DBG is not set
CONFIG_NET_LLDP_LOG_LEVEL_DEFAULT=y
CONFIG_NET_LLDP_LOG_LEVEL=3
CONFIG_NET_LLDP_CHASSIS_ID="CHASSIS_ID_PLACEHOLDER"
CONFIG_NET_LLDP_PORT_ID="PORT_ID_PLACEHOLDER"
And instead it will generate this:
# CONFIG_NET_LLDP is not set
Make the menu as an enablement config option as well.
Adapting lldp header file relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ARP, LLDP and GPTP functions have dummies in case of being disabled so
let's use IS_ENABLED() accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If we receive IPv6 packet where source address is unspecified
(all zeros), then we need to drop it.
Fixes#17450
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When performing OTA using the LwM2M subsys, several logging errors
regarding log_strdup were noted. Let's fix these.
Signed-off-by: Michael Scott <mike@foundries.io>
If a sample wants to use the Zephyr implementation of mbedtls, it
enables CONFIG_MBEDTLS and sets any needed Zephyr-specific mbedtls
options.
Currently, the LwM2M subsystem selects MBEDTLS automatically when
LWM2M_DTLS_SUPPORT is enabled. Let's remove this and let the
LwM2M client sample enable mbedtls and it's options.
This mimics the behavior of several other network-related samples
and removes conflicts when selecting alternate implementations of
MBEDTLS.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17399
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_parse_peerinfo().
The functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_sprint_ip_addr(). The
functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
NOTE: Also fixes an issue where a NULL is returned when the IP address
is unknown. This usually ends up with a crash/abort in the logging
code.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
If we receive IPv4 packet where source address is unspecified
(all zeros), then we need to drop it.
Fixes#17427
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If DNS server(s) are added or removed e.g., as part of DHCP
processing, send newly defined net-mgmt events so that
a user application may get this information.
Fixes#16924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removing an IPv4 router was missing, as well as finding the default
router for an IPv4 address.
Note howevere that IPv4 router features are not used anywhere yet. But
at least the API is there and is a 1:1 to IPv6, if that matters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- router lifetime is always a u16_t so fixing
net_if_ipv6_router_update_lifetime() signature.
- Coalescing router timers into one: this reduces the net_if_router
structure by 22 bytes
- refactor IPv6 and IPv4 router code so it's handled in generic
functions, to avoid duplicating 90% of the code for each family. This
also fixes the lifetime support for IPv4 which was missing.
Note however that IPv4 routing support seems to be missing as none of
the relevant functions are used anywhere yet.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_ipv6 by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_ipv6 can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 network interface
It starts to be interesting if it has 2+ network interfaces then.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_addr by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_addr can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 unicast IPv6
address. It's a nice memory improvment once it has 2+ unicast IPv6
address. Note that having IPv4 enabled along with IPv6 will also see
memory improvements since both IPv6 and IPv4 use the same struct
net_if_addr.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's regroup all the IPv4 related function into one ifdef. There is no
need to implement a dummy function for each: if IPv4 is not enabled,
these functions are unused in the core.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's regroup all the IPv6 related function into one ifdef. There is no
need to implement a dummy function for each: if IPv6 is not enabled,
these functions are unused in the core.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The hostname needs to have log_strdup() when printing it.
Also it is useful to print information if the sending fails.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- answer offset was 1 byte off.
- request offset, when copied into the answer, was off as well.
Fixes#16142
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Skip the TCP options before giving the data to application.
Without this, the TCP options would be passed to the application.
Fixes#17055
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The handcrafted allocation falls victim of misaligned structures due to
toolchain padding which crashes the socket test code on 64-bit targets.
Let's move it to the iterable section utility where those issues are
already taken care of.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
OpenThread did not verify if the interface provided in the net_mgmt
handler is actually an OpenThread interface. In result, when multiple
network interfaces were used, different interfaces were processed by the
OpenThread handler, ending up in a crash.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure the IPv4 and IPv6 socket addresses are initialized before
copying them. This avoids uninitialized memory access.
Coverity-CID: 199436
Fixes#17202
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to activate the network packet statistics
collection. Note that we do not have resources to calculate
each network packet transit times but we collect average times
instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Finalize the CONFIG_NET_CONTEXT_TIMESTAMP support that was started
earlier but never properly finished. We collect network statistics for
TX packet network stack throughput time from when the net_context_send
is called and when the net_pkt was sent out successfully by the network
device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only setting and getting of Ethernet Qav options are
supported via this interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the net_mgmt event has some info, like IP address, that
could be sent, then send it the same time. This is very useful
for the receiver of the event in order to know that is happening
in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to listen network management events using
BSD socket API. Application needs to create the socket using
AF_NET_MGMT address family. At this point we only support
receiving network management events that the network subsystem
is sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The info parameter is difficult to use if the caller does not
get information how long the info struct is. So add info_length
parameter to net_mgmt_event_wait_on_iface() and
net_mgmt_event_wait() APIs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_gw_by_index()
and set the gateway if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to call net_if_ipv4_set_netmask_by_index()
and set the netmask if enabled by configuration.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make IPv4 and IPv6 address addition and removal possible from
userspace app. But allow this only if CONFIG_NET_IF_USERSPACE_ACCESS
By default these operations are not allowed from userspace app.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes the issue where observations are automatically reported using
the minimum period instead of the maximum. This causes notifications to
be sent more frequently than configured when the resource does not
change.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Current socket connect call implementation always takes
K_FOREVER timeout value, which blocks TCP connections
in case failure. TCP connections waits until it receives
SYN ACK. If there is no SYC ACK means, connect call is
blocked forever.
Added a Kconfig option to define timeout value. Default
value is 3000 milliseconds. User can modify it.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Modify dns_unpack_answer() function to check if the answer is
compressed or not, and return correct values regardless.
Fixes#16594
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change will allow an MQTT client to override the compile-time
keepalive if desired. The change is structured such that the
compile-time default will still be setup by calling mqtt_client_init,
but can be changed by the application before calling mqtt_connect if
desired.
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mutex.h to sys/mutex.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/math_extras.h to sys/math_extras.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/fdtable.h to sys/fdtable.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Return value from close() can be ignored in sntp_close()
as it is not returning value to caller anyway.
Coverity-CID: 198863
Fixes#16584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_eth_get_ptp_clock_by_index() clock API to work with user space.
Create also unit test for testing this user mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If immediate logging is disabled, then we must use log_strdup()
when printing log string allocated from stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must query both IPv4 and IPv6 addresses if the hints parameter
is NULL i.e., user does not supply hints or if family is set to
AF_UNSPEC.
Fixes#16453
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function uses mqtt_read_publish_payload_blocking to perform a
blocking read of the specified number of bytes.
When reading out a payload, the normal use case is to read the
entire payload. This function facilitates that use case.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the socket is closed, then do CAN detach if that is needed.
This way the CAN interrupts are not received if there are no
CAN sockets listening the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
At the moment there is no real address for local CANBUS socket,
but we can still set protocol family of local socket to AF_CAN
so that for example net-shell "net conn" command can show
information about it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to dispatch the received CAN frame if there are multiple
sockets interested in the same CAN-IDs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The neighbor cache did not contain link address type. This is not
causing problems atm but good to fix anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that iface is NULL when selecting IPv4 destination
address for a sent packet.
Coverity-CID: 198877
Fixes#16570
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The query->len does not take 'Terminator' into account, shift over
one byte to prevent overwriting it with next field (Type).
This fixes mdns_resolver sample.
Fixes: 87eb552dd2 (net/dns: Switch mdns responder to new net_pkt API)
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Allow user to set the socket priority using setsockopt() call.
The priority value is used to order the networking queues so
that packets with a higher priority may be processed first.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that UDP header cannot be accessed so we need
to check that we do not do null pointer dereference.
Coverity-CID: 198866
Fixes#16581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These options are mutually exclusive, or more specifically,
CONFIG_POSIX_API has wider scope and supersedes
CONFIG_NET_SOCKETS_POSIX_NAMES. Implementation-wise, the two
options should not be defined at the same time, as that may
lead to declaration conflicts.
Fixes: #16141
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Offloaded `fcntl` implementation should be available for all offloaded
implementations, not specific for TI. `socket_offload.c` is already
conditionally compiled based on `CONFIG_NET_SOCKETS_OFFLOAD` option, so
there should not be conflicts for non-offloaded interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Length should be at least of UDP header size but not bigger than actual
payload size.
Reported-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to commit a211afb0 ("logging: Add option to detect missed
transient string duplication"), the logs for LwM2M subsystem
is now spamming missing log_strdup() calls.
Let's add log_strdup() where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If a valid numeric IP address is provided as argument, it should
be resolved without contacting DNS server.
Also, implement handling of AI_NUMERICHOST.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Having a checksum of zeros in UDP means "missing checksum" and is a
valid case as per RFC 768:
"An all zero transmitted checksum value means that the transmitter
generated no checksum (for debugging or for higher level protocols
that don't care)."
Such support is made possible by adding a new Kconfig option named
CONFIG_NET_UDP_MISSING_CHECKSUM.
However, that is valid only for IPv4. For IPv6, see the RFC 2460
section 8.1:
"Unlike IPv4, when UDP packets are originated by an IPv6 node, the UDP
checksum is not optional."
So the UDP checksum will always be verified in IPv6.
Fixes#16375
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
From RFC 768, in "Fields":
"If the computed checksum is zero, it is transmitted as all ones"
Fixes#16379
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The 32bits one can hold up to about 50 days, this is more than enough
knowing that ARP request timeout is 2 seconds.
So reducing the request start time to 32bits.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Do not always print general help for ping cmd. Only if user supplies
'-h' or '--help' command, print information about the parameters.
After this the generated HTML documentation looks better for the
ping command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread uses CONFIG_OT_PLAT_FLASH_PAGES_COUNT to calculate the # of
pages at the end of flash to use for storing OpenThread settings.
This calculation has an off-by-one error which sets the offset for
the storage area as 1 page of flash too low.
For example, on nRF52840:
- default setting for CONFIG_OT_PLAT_FLASH_PAGES_COUNT is 4
- flash size is 1MB (0x100000)
- flash page size is 4096 (0x1000)
- expected offset is 0xfc000
Using the current logic we get an offset of: 0xfb000
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16339
Signed-off-by: Michael Scott <mike@foundries.io>
Drop packet if it has broadcast destination MAC address but the IPv4
destination address is not multicast or broadcast address.
See RFC 1122 ch 3.3.6 for details.
Fixes#16276
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_if_ipv4_select_src_addr() should return global address
in the interface if nothing else is being found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let's filter out on a state parameter.
There is no impact as this function is not used anywhere yet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If we receive a multicast ICMPv4 packet, then send the reply back
with correct source address and not with multicast address.
Fixes#16257
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure we are able to receive UDP packets with broadcast
destination address. If CONFIG_NET_IPV4_ACCEPT_ZERO_BROADCAST
is set, then check here also non-standard broadcast address
that is described in RFC 1122 chapter 3.3.6.
Fixes#11617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
From POSIX.1-2017:
The getsockname() function shall retrieve the locally-bound name of the
specified socket, store this address in the sockaddr structure pointed
to by the address argument, and store the length of this address in the
object pointed to by the address_len argument.
The address_len argument points to a socklen_t object which on input
specifies the length of the supplied sockaddr structure, and on output
specifies the length of the stored address. If the actual length of the
address is greater than the length of the supplied sockaddr structure,
the stored address shall be truncated.
If the socket has not been bound to a local name, the value stored in
the object pointed to by address is unspecified.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
If host is NULL and ai_flags are AI_PASSIVE in a call to
getaddrinfo(), need to return "any" address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use the new math_extras functions instead of calling builtins directly.
Change a few local variables to size_t after checking that all uses of
the variable actually expects a size_t.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
We replied to an ARP request that has the same Sender Hardware Address
than that of ours. Such an ARP request must be discarded, no reply
should be sent and translation table should not be updated.
Fixes#16110
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If a packet is received with Ethernet source address different
from ARP's sender hardware address field, then DUT must use the
latter address in response packets.
Fixes#16098
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Libraries that use mbedTLS have been invoking
zephyr_link_interface(mbedTLS). It is not clear what the intent of
this code has been, but it is redundant with the mbedTLS build
scripts, so it can be safely removed.
In addition to being redundant, it causes problems as it introduces an
ordering dependency, with this code mbedTLS must be declared before
users of mbedTLS are declared. Since this code is redundant, this
ordering dependency is also unnecessary.
This code is believed to have been added early on by accident and
copied through cargo-cult programming since.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
sntp_simple() function queries the server (passed as "addr[:port]"
string). It wraps calls to a number of other functions, and may be
useful to write simple, concise apps needing the absolute time.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two utils to manipulate addresses in format "addr[:port]". I.e.,
network address (domain name or numeric), optionally followed by
port number:
* net_addr_str_find_port(), to return pointer to port number
substring (or NULL if not present).
* net_getaddrinfo_addr_str(), which is effectively getaddrinfo()
wrapper taking a "addr[:port]" string as a parameter.
The header file is named socketutils.h to emphasize that these
utility functions are implemented on top of BSD Sockets API
(and other POSIX/ANSI C functions), and thus portable to other
POSIX systems (e.g., Linux), so can be used in apps testing
POSIX compatibility. More utility functions (beyond address
manipulation) can be added later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Calling functions like `net_if_start_dad`, `join_mcast_nodes` or
`net_if_start_rs` lead to L2 API function calls, which is not correct
for offloaded interfaces and leads to a crash. This is especially
problematic, as they are called in the default configuration.
Avoid calling these functions while an offloaded interface is brought up
by adding extra jump label.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case socket offloading is used, one might want to disable native IP
stack, both IPv4 and IPv6, to save memory. Currently it is not possible
due to preprocessor check. Prevent that by adding additional exception
for socket offloading.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is possible that the device driver API pointer is null.
For example if the device driver returns an error, the device
code will make the API pointer NULL so that the API would not
be used. This can cause errors in networking code where we
typically do not check the NULL value.
Fixes#15003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- renaming functions to better names
- reordering functions place (register, then unregister for instance)
- centralizing logs to relevant place
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, there is no need for unspecified address bit. If specified address
bit is not set, then it will be obvious address is unspecified. Reducing
the amount of bits from 6 to 4.
This permits to reduce net_conn structure of 4 bytes. Its size is as
before indroducing node attribute.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will optimize path when unused an connection is required or when
looking up a used one.
That said, at this stage, it bloats up the net_conn structure with 4
added bytes. More optimization will overcome this drawback.
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of present #ifdef can be removed via using IS_ENABLED() macro.
Only small part of cache related logic still require #ifdef.
Fixes#8722
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
During net_pkt/net_context API changes, some ip handling blocks were
ordered ipv4 first, ipv6 second. While it is the contrary everywhere
else. So reordering to get things consistent.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Not all #ifdef can be removed: those which have a dedicated attribute
in struct net_context.
- For CONFIG_NET_CONTEXT_CHECK: switching the NET_ASSERT_INFO to
NET_DBG (simpler to read and anyway an error code is returned)
Fixes#8725
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Zephyr implementation of OpenThreads utilsFlashErasePage platform
function did not disable flash protection before calling `flash_erase`
function. This resulted in an error instead of actual flash erase on
platforms that properly implement flash write protection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This make use of NET_IF_NO_AUTO_START flag so Bluetooth interfaces are
not automatically enabled after initialized.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Implement OpenThreads frame pending bit management on top of the Zephyrs
radio driver API. This allows for proper Sleepy End Devices handling
from the parent side.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The pkt variable cannot be NULL at this point so the check for
nullness is not needed.
Coverity-CID: 198002
Fixes#15777
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the loopback driver is enabled, then the packet might come
from localhost in which case mark it properly. Without this marking
the packet from/to 127.0.0.1 or ::1 would be dropped in later checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When importing a pre compiled imported library it is currently
required to perform three steps.
This commit introduces a helper function which allows the
user to import a library with a single function call.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
If ethernet controller has VLAN tag strip flag enabled
(ETHERNET_HW_VLAN_TAG_STRIP), L2 etherent will not read tag from
the Rx etherent header. Instead it will fetch VLAN tag from
net packet metadata.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Allow for including arbitrary data in net_icmpv6_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Allow for including arbitrary data in net_icmpv4_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Allow accessing already parsed information from the ICMP header
that callbacks might be interested in.
This makes the callback signature and behaviour match that of
the ICMPv6 implementation.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
We need to re-initialize the trickle->timer delayed work to use
trickle_timeout() if there are multiple triggerings.
Fixes#15606
Signed-off-by: ling wei <lingwei@cisco.com>
Existing sntp_request() function has a coarse integer seconds
precision, discarding fractional part as returned by SNTP.
Deprecate it, and instead introduce sntp_query() function which
returns both integer and fractional seconds as a newly introduced
structure sntp_tstamp.
Fixes: #15596
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, a case when poll() call timed out wasn't handled, and
recv() was called unconditionally. In the case of timeout, recv()
itself would hang indefinitely.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit prevents a situation when stored and possibly modified
commissioner dataset is overwritten with default configuration during
OpenThread initialization.
It introduces a new function, openthread_start, which verifies if the
dataset is already stored, and if not, depending on configuration,
preloads the default configuration or initiates the join procedure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the NET_IF_NO_AUTO_START network interface flag is set, then
do not take network interface up during the initialization of the
network interface. The network device driver can set the flag in its
network interface initialization function if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In addition to checking that the ARP entry does not exist as the
implementation is done currently, also check if the ARP packet
is due to IPv4 link local address configuration. In both cases
use the provided IPv4 address instead of the one set for the
interface.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
IPv4 link local uses ARP to detect conflicting addresses. Properly
set the ethernet packet type to NET_ETH_PTYPE_ARP when probing
for address duplicates.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The source address in unicast DHCPv4 Request packets was found out
to be all zeros address 0.0.0.0. This address is only acceptable if
the destination is a multicast one, where the host in question is
acquiring a DHCP address lease. This is true for the DHCP Discover
and the initial DHCP Request message from the client towards the
server. As subsequent DHCP Request renewal messages are sent as
unicast to the server, the server will drop such packets.
Fix this issue by explicitely specifying what source IP address is
to be used, if none is specified, the all zeros address 0.0.0.0 is
used in multicast addresses. The source address in the other
unicast cases is identical to the 'ciaddr' in the DHCP message.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
If for some reason the DNS resolver callback is not called properly
then make sure that semaphore will not block forever.
Fixes#15197
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When VLAN is enabled, ethernet l2 layer fills ethernet header
but not added to the network buffer.
Fixes#15346
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This fixes an issue where if timestamp == service_due_timestamp,
we don't call the periodic service. Then the following call to
engine_next_service_timeout_ms() returns 0 because the service
is still due and lwm2m_engine_service() is called again.
This process repeats several times until the value of
k_uptime_get() changes and then the work is finally handled.
Previously, the resolution of k_uptime_get() was in ms. A recent
change to this API defaults Zephyr so that the resolution is
set via CONFIG_SYS_CLOCK_TICKS_PER_SEC (default 100).
This means the value of k_uptime_get() only changes every 10ms.
Reported-by: Github User pieterjanc
Signed-off-by: Michael Scott <mike@foundries.io>
"It's a Trap!" -- Admiral Ackbar
When moving to the BSD-socket APIs, the original thread running LwM2M
periodic services such as observes and lifetime updates, was replaced
with a re-occuring workqueue job. To save the overhead of creating a
new thread, I used the system workqueue for these jobs.
This was a mistake. If these jobs hit a semaphore or wait for some
reason, it cannot be prempted due to the priority of the system work
queue.
Let's instead add this service handling to the thread that we already
use for polling sockets. This also removes a configuration issue where
the system workqueue stack size needed to be increased. This can now
be adjusted via the LWM2M_ENGINE_STACK_SIZE knob.
Directly fixes semaphore usage in the socket-based DNS code.
This was introduced as a bugfix for non-responsive DNS server hanging
the Zephyr device forever. However, this probably fixes randomly
seeming hangs on the device.
Signed-off-by: Michael Scott <mike@foundries.io>
Increase the default mgmt event stack size from 512 to 768 because of
stack overflows.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
DNS is not part of L3, but as dhcpv4 or the net shell, it is a services
on top of the network stack. So let's gather all in a dedicated
function.
This also rework the order when starting the DNS service. There was an
issue for offload device: these would be fully initialized in
init_rx_queues() which was called after l3_init. l3_init had already
started dns: which would not be able to bind correctly, proving to be
fully dead afterwards. Instead, starting the dns at the very end
ensures that all is initialized properly from devices to stack.
Fixes#15124
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
With or without options headers it has to work. Currently it was
setting always hop-by-hop next header which is obviously wrong but
worked on ipv6_fragment test since that one has only packets with
optional headers (hop-by-hop in that case has to be the first optional
header).
Fixes#14622
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the TCP segment is not sent properly by L2, then do not mark
it "not sent" in net_if.c:net_if_tx(). That "not sent" marking
confused TCP ref counting in tcp.c:tcp_retry_expired() and caused
the packet to be freed too early which then caused free net_buf
access issue during packet resend. This free memory access was
seen with zperf sample application.
From TCP point of view, the packet can be considered sent when
it is given to L2. The TCP timer will resend the packet if needed.
Fixes#15050
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit 9cd547f53b.
The commit we are reverting, fixed originally the issue that was
seen with zperf. There we freed the net_pkt too early while it was
still waiting for a TCP ACK. The commit 9cd547f5 seemd to fix that
issue but it was causing issues in dump_http_server sample app which
then started to leak memory. No issues were seen with echo-server
with or without the commit 9cd547f5.
So the lessons learned here is that one needs to test with multiple
network sample apps like dump_http_server, echo_server and zperf
before considering TCP fixes valid, especially fixes that touch
ref counting issues.
Fixes#15031
The next commit will fix the zperf free memory access patch.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network packet ref count was not properly increased when
the TCP was retried. This meant that the second time the packet
was sent, the device driver managed to release the TCP frame even
if we had not got ACK to it.
Somewhat long debug log follows:
The net_pkt 0x08072d5c is created, we write 1K data into it, initial ref
count is 1.
net_pkt_write: pkt 0x08072d5c data 0x08075d40 length 1024
net_tcp_queue_data: Queue 0x08072d5c len 1024
net_tcp_trace: pkt 0x08072d5c src 5001 dst 5001
net_tcp_trace: seq 0x15d2aa09 (366127625) ack 0x7f67d918
net_tcp_trace: flags uAPrsf
net_tcp_trace: win 1280 chk 0x0bea
net_tcp_queue_pkt: pkt 0x08072d5c new ref 2 (net_tcp_queue_pkt:850)
At this point, the ref is 2. Then the packet is sent as you see below.
net_pkt_ref_debug: TX [13] pkt 0x08072d5c ref 2 net_tcp_queue_pkt():850
net_tcp_send_data: Sending pkt 0x08072d5c (1084 bytes)
net_pkt_unref_debug: TX [13] pkt 0x08072d5c ref 1 (ethernet_send():597)
Ref is still correct, packet is still alive. We have not received ACK,
so the packet is resent.
tcp_retry_expired: ref pkt 0x08072d5c new ref 2 (tcp_retry_expired:233)
net_pkt_ref_debug: TX [10] pkt 0x08072d5c ref 2 tcp_retry_expired():233
net_pkt_unref_debug: TX [10] pkt 0x08072d5c ref 1 ... (net_if_tx():173)
net_pkt_unref_debug: TX [10] pkt 0x08072d5c ref 0 ... (net_if_tx():173)
Reference count is now wrong, it should have been 1. This is because we
did not increase the ref count when packet was placed first time into
sent list in tcp.c:tcp_retry_expired().
The fix is quite simple as you can see from this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes following issues.
* If IPv6 neighbor table is full, stack can not add any new
neighbors. So stale counter is introduced. Whenever neighbor
enters into STALE state, stale counter will be incremented
by one. When table is full and if stack wants to add new
neighbor, oldest neighbor in STALE state will be removed
and new neighbor will be added.
* When neighbor is in PROBE state and when it exceeds max
number of PROBEs, only neighbor with router is removed.
As per RFC 4861 Appendix C, entry can be discarded. Now
neighbor will be removed from the table.
* Reachability timer has an issue. e.g. if a first entry timer
is 10 seconds, after 3 seconds, a new entry added with
only 3 seconds. But current implementation does not check
whether remaining time of current left over timeout is more
than new entry timeout or not. In this example, when new entry
timeout is 3 seconds, left over timeout from first etnry is
still 7 seconds. If k_delayed_work_remaining_get() returns
some value then new entry time out was not considered.
Which is bad. It fixed now.
* nbr_free is used sometimes to remove the neighbor. Which does
not remove route if that particulat neighbor is route to some
other neighbor. net_ipv6_nbr_rm() should be used in such places.
* Trivial changes which does not affect functionality.
Fixes#14063
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Fix regression and allow incoming packet when source and
destination port numbers are the same.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case of Ethernet for instance, the MTU is larger than the minimal
IPv6 MTU, so it is not required to fragment a packet that fits in
Ethernet MTU.
Fixes#14659
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is invalid to try to bit shift the same amount of bits as
what is the number of bits in the left expression’s type.
Coverity-CID: 187079
Fixes#8988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "is this packet for us?" filter in net_ipv4_input() has a minor
logic error which fails to discard many packets which are.. not for us.
Fixes: #14647
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The context_alloc_pkt() might run out of memory, and if that
happens we must not try to set the context pointer in it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We are reverting the changes in commit
55b3f05932 given build errors are seen
when fcntl.h is included, as it declares fcntl() as a non-static
function. The same function cannot be declared as both static and
non-static.
Instead, we avoid redefining fcntl() in lib/os/fdtable.c specifically
for case of the SimpleLink family, til we have support for the new
socket_op_vtable.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Since the new packet flow came in, payload comes at the end so udp
length for instance is known only when we "finalize" the packet.
However such finalization was still under the condition of chksum
offload, like it used to be in the former flow (udp headers were
inserted). This is obviously wrong but that was not caught with
existing driver in master as none of these drivers offloading
chksum calculation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Commit fc27a81ed2 ("net: context: Select proper network interface
when binding") moved the bind_default() call to after the remote
address was set for the net_context.
This and a later net_pkt API refactor broke net_offload() handling
so that context->iface wasn't set and context->flags didn't have
NET_CONTEXT_REMOTE_ADDR_SET correctly.
Let's fix this by relocating the net_offload handling to after
these have happened.
Signed-off-by: Michael Scott <mike@foundries.io>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_offload API is left untouched, so it still takes a net_pkt as input
for the buffer. This is under-optimized since offload drivers will copy
the data from that net_pkt back into contiguous buffer again.
Let's tackle this issue another time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This attribute, in case CONFIG_NET_STATISTICS is enabled, made sense
when L2's send() function did not return the length of the sent packet.
But now, it's a superflous optimization as is it used only to set the
stats on recv or send, where net_pkt_get_len() can be used directly.
This helps to save 2 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Seems like a useless attribute. Since net_context is not being used by
the user directly (socket is the unique interface now) and since no core
parts uses the token parameter of net_context API: let's remove the
attribute.
This helps to save 4 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That function was responsible for allocating new buffer element, but it
is now unused and can be removed safely. Buffer allocation is now done
via net_pkt_alloc_buffer().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for these anymore: all is dictated by the position of
the net_pkt's cursor now
- actual cursor position is like the former appdata attribute
- net_pkt_remaining_data() is like the former appdatalen attribute
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Former net_context_send/sendto and net_context_create_ipv4/ipv6 are now
unused and can be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 next header might be something else (here NET_IPV6_NEXTHDR_HBHO)
but when finalizing it is mandatory to give the actual last header
protocol type. In this case IPPROTO_ICMPV6, so the checksum can be
computed properly then by net_icmpv6_finalize() called from
net_ipv6_finalize().
Fixes#14663
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the L2 layer might have modified the cursor, reset it here
before giving the packet to promiscuous mode API. This way
the application will get a fresh copy of the buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP context is now created with refcount of 2, signifying that it's
jointly owned by an app and stack. Thus, net_context_put()
unconditionally calls net_context_unref() to decrement refcount on
app's behalf, and leaves stack's refcount to internal routines
which handle sending/receiving/timing out FINs, etc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
TCP context is effectively owned by both application and the stack:
stack may detect that peer closed/aborted connection, but it must
not dispose of the context behind the application back. Likewise,
when application "closes" context, it's not disposed of immediately,
there's yet closing handshake for stack to perform.
This effectively means that TCP contexts have refcount of 2 when
they're created. Without this change, following situation is
possible: peer opens connection, an app get a context (or socket)
via accept, peer sends data, closes connection. An app still holds
a reference to connection, but stack may dispose of context, and
even reuse it for a new connection. Then application holds a reference
to either free, or completely different context.
This situation was very clearly and 100% reproducible when making
Zephyr port of open62541 library, which works in async manner using
select().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To save binary size, currently just returns textual name of error
code, e.g. EAI_FAIL -> "EAI_FAIL". Based on real usecases, can be
replaced with user-friendly message later. (Current usecase is to
allow/help to elaborate sockets API by proof-of-concept porting
existing socket apps).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Normally, this bug wasn't apparent as the value is type-casted
to a float32/64 type. However, once we start persisting these
values they need the correct length.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's avoid future compile issues with this macro when passing
in a type-casted value that isn't surrounded by parenthesis.
Signed-off-by: Michael Scott <mike@foundries.io>
Occasionally we see a stack crash in LwM2M. This may have been
due to the swap from net_app APIs to socket-based APIs.
Let's raise the default stack by 1k.
Signed-off-by: Michael Scott <mike@foundries.io>
When a context is closed to a server, we should clean up any
existing observes along with it. Otherwise these will try to fire
afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
We are already in sm_do_registration(), there's no need to check
!sm_is_registered(). Either we are performing a full registration
or a registration update. In both cases, sm_send_registration()
is called.
Signed-off-by: Michael Scott <mike@foundries.io>
If an error is received during registration update, we need to reset
the status so that a full registration is performed. This was
incorrectly being set to ENGINE_REGISTRATION_SENT.
The correct status should be: ENGINE_DO_REGISTRATION
Signed-off-by: Michael Scott <mike@foundries.io>
send() returns -1 upon error and sets errno appropriately. Let's
not bother saving the return code and instead share errno back
to the user.
Signed-off-by: Michael Scott <mike@foundries.io>
The socket-can code expects to have "struct can_frame" from
application when it calls send(). We then have to convert to
"struct zcan_frame" as that is what the driver expects.
Same thing when receiving data. We just convert to
"struct can_frame" and pass that to application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Now that IPv4 options are handled, ICMPv4 echo reply must be created
taking into account that IPv4 header length can be variable. So instead
of cloning and rewriting (that would copy the useless options), let's
allocate and copy only the payload.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 header length might be bigger than struct net_ipv4_hdr if there are
options appended to it.
Fixes#11618
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 header might come with options, unlike IPv6, these are not
encapsulated in option header but are fully part of the IPv4 header.
Zephyr must handles these. Now silently ignoring their content and
setting the cursor to the payload properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is probably the only place where net_pkt_alloc_from_slab() is going
to be used.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant for very particular use case as only logging uses that.
Where it makes entirely sense for it to send the logs through its own
slab/pool in order to not drain the core slabs/pools.
So enabling the new API to manage that. That has to be used with
net_context for the buffer pool. So one has to first allocate the
net_pkt from external slab, set the context and then (and only then)
allocate buffer. Basically, only net_context will uses that scheme
anyway.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Though core system is able to manage packet timestamping internaly (gptp
requires it for instance), it might be necessary to enable/disable
packet timestamping from net context directly.
Currently this will be only used by the tx timestamp test. So this
support is disabled by default. (And gptp does not require it anyway).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is required if traffic class is enabled, so allocated packets from
net_context do get the right priority set.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
That can be useful on some tests which will not have any interface but
still allocate net_pkt. Also, one may allocate a packet with buffer not
knowing yet the interface it will be send through.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
subsys/net/lib/lwm2m/Kconfig.ipso is 'source'd within an 'if LWM2M', in
subsys/net/lib/lwm2m/Kconfig, so the 'depends on LWM2M' is redundant.
The 'depends on NET_IPV4' and 'depends on NET_L2_OPENTHREAD' are within
corresponding 'if's in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some of these are from 'source'ing a file within a menu that has a
'depends on NET_L2_ETHERNET' (in drivers/ethernet/Kconfig) and then
adding another 'depends on NET_L2_ETHERNET' within it.
Similarly, subsys/net/l2/ethernet/Kconfig sources files within an
'if NET_L2_ETHERNET'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This reverts commit 8cb5d083cb53627964ed72fb9fa3fb7a5219739f.
This was breaking tests on master due to missing dependency that is
still being reviewed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is done to conform with how the rest of the socket APIs are
implemented during socket offload. Otherwise link error would
result due to the symbol being redefined in lib/os/fdtable.c.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
As per RFC2131 4.1.1 requires we wait a random period
between 1 and 10 seconds before sending the initial
discover. But tests can not wait that longer. So this
option helps test to configure the value to minimum.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No Kconfig symbol called NET_GPTP_STACK_SIZE has ever been defined in
the Zephyr repo. Drop the CONFIG_* prefix from the #define.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We sometimes want to join a device to OpenThread mesh automatically.
This commit adds supports to do by Kconfig.
The default of CONFIG_OPENTHREAD_JOINER_PSKD is based on this page:
https://codelabs.developers.google.com/codelabs/openthread-hardware/
Signed-off-by: Takumi Ando <takumi.ando@atmark-techno.com>
If we receive the ARP request, then check if the ARP cache
contains an entry for this IP address already. If it does,
then update the MAC address in the cache.
Fixes#10188
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These options are oftentimes used when implementing servers, and
thus required to port existing socket apps. These options are also
safe to just ignore, e.g. SO_REUSEADDR has effect only for repeated
recreation of server socket (not an expected usecase for a Zephyr
app), while TCP_NODELAY is effectively the default for Zephyr, as we
don't implement TCP buffering (aka Nagle algorithm).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Multiple flag bits were set so the ACK flag set was not checked
properly which meant that connection establishment was not
successfull.
Fixes#13943
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ipv6_handle_ext_hdr_options() can return negative value
but we stored it into unsigned variable and then checked < 0.
Coverity-CID: 190995
Fixes#13830
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LI bits checks is useless as the bitshifted value cannot be
larger than SNTP_LI_MAX (3).
Coverity-CID: 190924
Fixes#13888
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Found via Coverity CID 191001: Control flow issues (NO_EFFECT)
This less-than-zero comparison of an unsigned value is never true:
"put_char(out, '}') < 0U".
Let's fix this check to be less than 1 instead as it should have
been originally.
Signed-off-by: Michael Scott <mike@foundries.io>
To get u8_t value, just right shift the operands are enough.
Fixes#12298
Coverity-CID: 190635
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The net-shell was using wrong config options for statistics
support. Also net_stats.h had wrong config used for IPv6 MLD
statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Poll descriptor was not incremented in poll update function in case it
was reported as not ready. In result, poll could end up processing the
same poll descriptor for every fd requested to monitor.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework detection of EOF on a socket, so that it can be detected in a
poll prepare that socket is in in a EOF state and poll can return
immediately.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Unfortunately, most of the dns pack/unpack code is not factorized, and
mdns responder rewrites its own functions to write dns hdr, query,
answer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unfortunately, most of the dns pack/unpack code is not factorized, and
llmnr responder rewrites its own functions to write dns hdr, query,
answer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
So instead of building the net_pkt by itself, dns will pass its message
buffer to net_context_sendto_new(), which in turn will build the net_pkt
relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since net_context_sendto_new() does not take a net_pkt anymore, the only
way to set net_pkt's ttl/hop_limit is to pass it through net_context.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
dns_write was in the middle of this, let's just move it to a more
relevant place so we logically have macros, then local variables then
functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some of dns_pack.c macros are also used in resolve.c, so let's just put
the macros in dns_pack.h
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Once the fraction value has been assigned a value, we can't move
the exponent any more.
Fixes erroneous values the binary32/64 formats.
Signed-off-by: Michael Scott <mike@foundries.io>
- differentiating actual "fragment" to buffer element from a net_pkt
- instead of copying data (and thus allocating buffer) let's just take
the fragment buffer and put it into result packet.
- fixing compilation issue in relevant test
It's more efficient that way, as we use already allocated fragment
buffer instead of reallocating/deallocating after each fragment
reception.
A possible optimization would be to calculate the actual size + header
difference if only the actual size is close to the target size.
It would avoid to get a dry run of the header decompression for each
fragment received. The difficulty being in finding the sweet spot when
it is relevant to calculate the header difference.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since we don't want to redo the complex calculation, let's reuse the
uncompress functions, adding a dry_run possibility to those.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When DTLS client was added to `poll` before/during the handshake, it
could throw errors and in some circumstances (when polling thread was
cooperative and had higher or equal priority to the handshake thread)
could lead to a deadlock in the application.
Prevent that, by blocking on handshake semaphore instead of fifo. Poll
will start using fifo for data poll only after handshake is complete.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of simple bool value, use a semaphore to notify that TLS
handshake is complete. This way, we can monitor this value with k_poll.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Errno value is only significant when `recvfrom` function indicated an
error (by returning -1). We should not depend on it's value if no error
is notified.
As the return value of `recvfrom` is already checked, misused errno
verification can simply be removed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It simplifies things again, as it does not need to create the net_pkt by
itself anymore.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When closing the socket, zsock_close_ctx() would call
net_context_accept() when the socket was in "LISTEN" state.
This would result in an error log message for "Identical
connection handler already found" because the connection
context was already created because the initial
zsock_listen_ctx() called net_context_accept() to set up
the socket at the beginning. This change adds a test to
check if the callback is NULL which indicates this
close state and avoids the error message.
Signed-off-by: david leach <david.leach@nxp.com>
The sending of the final FIN message was being put on the sent_list
to be handled by the retry logic and being sent directly. But in
the case of a socket that never had a connection, the logic after
the direct send would decrement the reference on the packet which
would cause the retry logic to eventually have a situation where
the pkt is on the sent_list queue but the buffer associated with
the packet is freed back to slab. The code would then get a null
pointer to the tcp header and would fault when setting the crc to
zero on frdm-k64f platform.
Fixes#13489, #13301
Signed-off-by: david leach <david.leach@nxp.com>
The TODO file contained some random nice to have features.
The file does not mention use cases for these and also currently
the new features are managed and discussed in github.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Maybe there is an easier way to fill in the buffer in one call from an
otMessage.
Switch "frag" keyword to "buf", as "frag" is now reserved for actual
packet fragmentation and not buffer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Possible null pointer dereference when looking up the nexthop
neighbor.
Coverity-CID: 190639
Fixes#12294
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ICMPv6 network packets are processed and consumed (if not dropped)
within `net_icmpv6_input` function. Therefore they shoud not be
passed to the `net_conn_input` function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Macros are replaced by C++ friendly versions:
- SHELL_CREATE_STATIC_SUBCMD_SET by SHELL_STATIC_SUBCMD_SET_CREATE
- SHELL_CREATE_DYNAMIC_CMD by SHELL_DYNAMIC_CMD_CREATE
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This function is the opposite of getaddrinfo(), i.e. converts
struct sockaddr into a textual address. Normally (or more
specifically, based on the flags) it would perform reverse DNS
lookup, but current implementation implements only subset of
functionality, by converting to numeric textual address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
`net_ipv6_finalize` expects packet cursor to be reinitialized in order
to finalize packet correctly. This commits adds missing cursor
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A debug message told "Set EOF flag on pkt %p", but actually printed
net_context instead of net_pkt.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In order to follow the BSD socket numbering of the network
interfaces, start numbering from 1. The index 0 is reserved
to mean any interface in BSD socket code.
Fixes#13084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that network related functions are always documented.
This means keeping the prototype and possible stub together.
Fixes#12615
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Commit 44964c735e ("net/gptp: Switch GPTP to new net_pkt API") changed
the callback used for allocation (from net_pkt_get_reserve_tx to
net_pkt_alloc_with_buffer), but for compilation with
CONFIG_NET_DEBUG_NET_PKT_ALLOC enabled, both callbacks are used
(the first pointer was just overwritten, causing MPU FAULT).
This commit removes the extra callback and fixes the fault.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Per Coverity report, oma_tlv_put() does pointer arithmetic accessing
the data as an array of u8_t. In put_bool() we get a singleton
pointer from the evaluation of: "value != 0 ? 1 : 0" which is
passed to put_s8() which in turn passes it to oma_tlv_put().
To avoid misinterpretation, let's create a temporary s8_t variable
to pass into oma_tlv_put instead.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12312
Signed-off-by: Michael Scott <mike@foundries.io>
The option CONFIG_NET_SOCKETS_RAW name was changed to
CONFIG_NET_SOCKETS_PACKET but two checks using the old name
was left to net_context.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
shutdown() itself is described as just marking RX or TX path of a
socket as not available. For the first approximation, we implement
it just as a dummy function, to allow build existing POSIX
applications which use it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Zero is a special value in the binary32/64 format. It has all zero
bits (sign=0, exponent=0 and fraction=0).
Handle this special case explicitly instead of trying to encode
in binary format which results in an incorrect value of 0.5.
Signed-off-by: Michael Scott <mike@foundries.io>
net_context uses net_pkt_alloc_with_buffer(), which sets the family and
protocol (according to parameters) so no need to set the family again.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Initial implementation of IPSO Timer object #3340
Based on: http://www.openmobilealliance.org/tech/profiles/lwm2m/3340.xml
"This IPSO object is used to time events and actions, using patterns
common to industrial timers. A POST to the trigger resource or On/Off
input state change starts the timing operation, and the timer
remaining time shows zero when the operation is complete. The
patterns supported are One-Shot (mode 1), On-Time or Interval
(mode 2), Time delay on pick-up or TDPU (tmode 3), and Time Delay
on Drop-Out or TDDO (mode 4). Mode 0 disables the timer, so the output
follows the input with no delay. A counter is provided to count
occurrences of the timer output changing from 0 to 1. Writing a value
of zero resets the counter. The Digital Input State resource reports
the state of the timer output."
NOTE: Only One-Shot Mode (mode 1) is implemented in this patch.
Signed-off-by: Michael Scott <mike@foundries.io>
During the initial work on LwM2M, the float32/64 code was
basically stubbed out. Float32 sent only whole values and
float64 was completely broken.
Let's clean up the OMA TLV formatting code by moving the float
processing code into a separate file: lwm2m_util.c.
Then using public definitions for binary32 and binary64, let's
fix the processing code to correctly fill the float32_value_t
and float64_value_t types.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that legacy net_pkt_pull function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for pulling, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for copying, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for cloning, no need to
keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_pkt_clone_new() sets the same attributes of the original packet to
the cloned one.
Fixes#13147
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for appdata pointer: net_pkt's cursor is already at the
right position, i.e. the beginning of the payload right after all IP/TCP
headers.
Also, when reading the actual data, let's use net_pkt_read_new()
relevantly instead of going through the buffer by ourselves.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for appdata pointer: net_pkt's cursor is already at the
right position, i.e. the beginning of the payload right after all IP/UDP
headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will return the amount of data to be read from current cursor
position. This will prove to be useful to remove appdatalen attribute.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now useless as the only function using it
(net_pkt_set_appdata_values) got removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's not call net_pkt_set_appdata_values() which will be more costly
since it will need to parse all over again the packet to grab the tcp
header. Instead, let's use the tcp header pointer we have already and
set the appdata attributes directly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though unused anywhere, this function seems to have some usage while
debugging.
Let's rename it to a more semantically relevant name.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It not used anymore. If one wants to do the same check, it will require
to place the net_pkt cursor at the relevant position and use
net_pkt_is_contiguous(pkt, sizeof(struct net_udp_hdr))
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now useless and can be replaced by net_udp_get_hdr() directly, in
the 2 unit tests it was used.
Removing as well the dbg function too_short_msg()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the new API for these 2 functions. Note that in some places,
using these functions is under-optimized (like in llmnr-responder in
dns: it gets the ip/udp headers already from the recv callback. That
will need to be taken care of later).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_pkt_tcp_data was only used in tcp unit test and could be replaced by
local net_tcp_get_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_ipv6_finalize() can take care of this, if net_pkt's ipv6_next_hdr
attribute is set to the right one, as well as ipv6_ext_len one.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Legacy net_pkt allocator was not setting default value for IPv6
next header. And new net_pkt allocator was not setting default value
for TX traffic class and virtual LAN tag.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is now unused anywhere: former net_pkt_get_src/dst_addr where the
only one using it and that has been changed since.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function is only used in sockets, thus making it a private function
of socket library and renaming it relevantly.
Note that sockets should be reviewed at some point to avoid using such
function: zsock_received_cb() already get the ip header and the protocol
header, so it could grab the src addr/port from there. It would be way
more optimized to do so, since net_pkt_get_src_addr is costly as it
parses all over again the ip/protocol headers.
utils unit test is updated and the test of the former
net_pkt_get_src_addr/net_pkt_get_dst_addr are removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For networking code, it does not make sense to have zero net_buf
or net_pkt instances. Make sure this is enforced by code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
pkt->buffer is represented by 1+ net_buf. If some are unused, this will
deallocates them.
This situation can happen on TCP where net_pkt allocator evaluates the
header size to its maximum size. Which space might not be (fully) used
in the end. On fixed data size buffer, this might end up by having last
buffer(s) not bein used. So better removing those.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
UDP was the only one doing the right thing. Let's generalize it
relevantly.
Fixes#13211
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will take into account the family and the protocol, as well as
existing buffer occupation, to return the available buffer space that
can be used for payload.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If a socket is in EOF, it's readable (so client can read() it, get 0
in return, figure it's in EOF, and close it). Without this change, we
had peer-closed sockets leaked (ignore) by poll() and select().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
DNS callback needs "struct shell *shell" data structure to pass as
a parameter to shell print. How it was achieved previously is that
it was packaged together with cosmetic "bool first" param into
"struct net_shell_user_data" on the stack, and passed to the
callback. The problem was that the original command handler then
returned, so the "struct net_shell_user_data" on the stack was
overwritten, and the callback crashed on accessing it.
An obvious solution was to make that structure static, but that would
leave to issues still, as turns out we allow system shell to be run
as more than one concurrent instances.
Next solution was to keep this structure on the stack, but block the
command handler until callback is finished. However, that hit a
deadlock due to not well thought out use of a mutex in the shell
printing routines.
The solution presented here is due to @nordic-krch, who noticed that
"bool first" param is indeed cosmetic and not really required. Then
we have only "struct shell *shell" to pass to the callback, and can
do that in callback's pointer param directly, ditching
"struct net_shell_user_data" which needs to be stored on the stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use DT_FLASH_ERASE_BLOCK_SIZE prefixed defined instead of
FLASH_ERASE_BLOCK_SIZE as the non-DT version is deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
No need to enable IPv4 any more as that is now optional.
This saves some memory as the application can work without
IPv4, IPv6, UDP or TCP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The packet can be referenced somewhere else and letting the newly added
L2 header will generate corrupt packet. If the same packet is being
resent, ethernet will add again its L2 header. Thus the need to remove
such L2 header every time a packet has been sent, successfully or not.
Fixes#12560
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commits adds a new MQTT transport. The purpose is to be able to
connect to a MQTT broker through a SOCKS5 proxy.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commit fixes compilation warnings if user disables
CONFIG_NET_IPV4, CONFIG_NET_IPV6, CONFIG_NET_TCP and
CONFIG_NET_UDP.
E.g Samples like packet-socket doesn't need above configuration.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Implemented via Zephyr's net_hostname_get(). As support for that call
is configurable and by default off, while many POSIX applications
assume that hostname is always available, we need a default value
in case CONFIG_NET_HOSTNAME_ENABLE is "n". Initial version of this
patch added that on the level of gethostname() call, but of was
suggested to move that down to net_hostname_get() instead.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It is possible to set the filter in user application and that
information is passed to the CANBUS device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the value 0 is a valid network interface index, we cannot use
unsigned value for interface index as that would not allow to
distinguish an invalid value. So make interface index a signed
8-bit value which is ok as we do not expect to have more than 127
network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function did not take the address family into account
when printing protocol name. The protocol value depends on
address family.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows user to create a CAN socket and to read/write data
from it. From the user point of view, the BSD socket CAN support
works same way as in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds packet socket support to socket api.
This version supports basic packet socket features.
Protocol family is AF_PACKET, type of socket is
SOCK_RAW and proto type is ETH_P_ALL. The user will
receive every packet (with L2 header) on the wire.
For TX, the subsystem expects that the user has set
all the protocol headers (L2 and L3) properly.
Networking subsystem doesn't verify or alter the headers while
sending or receiving the packets. This version supports packet
socket over Etherent only. Also combination of other family
and protocols doesn't work (i.e. Application can not open
packet-socket and non packet-socket together).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If packet family is AF_PACKET and CONFIG_NET_SOCKETS_PACKET
is enabled, just handover the packet to driver for sending.
L2 layer will not touch AF_PACKETs at the moment.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_SOCKETS_PACKET is enabled, then feed the packet
to net_packet_socket_input() for processing. It will search
for the net_contexts and if proper handler is found, pass
the packet to connection handler.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit adds basic packet socket support to net_context and
allows application to receive or send network packets in raw
format.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As we are adding more protocol families and protocol types
to connection handlers, some values might be same across
different types. Current connection handler only stores
proto type to match the handler, which is not enough if
we add more types. Also combination of family and types
may vary too. So adding family to connection handler to
figure out best match.
Also changing proto variable in net_conn from u8_t to u16_t.
net_context has 16 bit proto.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When creating net_pkt, the default value of net_pkt data_len was
set to zero. In case of RAW sockets, when family is AF_PACKET,
the data_len will be zero as there is no higher level protocol
information. So in this case, the default value of data_len
must be set to interface MTU
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The return value of net_if_get_link_addr points to a struct net_linkaddr
instead of to the raw MAC address. Without this fix the source address
will always end in 06:03 and will most likely be the same for different
boards running the same software.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
A few cases were missed where we weren't cleaning up the existing
connection correctly. This was easily missed because we try and
clean up the connection everywhere.
Instead, let's clean up any existing connection prior to starting
a new one in the do_bootstrap_reg() and do_registration()
functions.
Signed-off-by: Michael Scott <mike@foundries.io>
- Fix enum naming throughout
- Correct next_instance logic
- Move to registration server if no bootstrap server is found
- Fixes to logging
Signed-off-by: Michael Scott <mike@foundries.io>
As the legacy library has been removed, we no longer need to
differentiate betwen MQTT implementations. Therefore align the library
folder name with other libraries and remove the `_sock` suffix.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of Ethernet, if the requested size is larger than MTU and if
AF_UNSPEC is provided, the allocator will need to take into account
the ethernet header size which is not accounted in the MTU.
Other current L2 do not follow that rule as their MTU is based on IP
one (IPv6 most of the time). What they declare as MTU is the full frame
size they handle (minus the FCS for instance in 15.4). So with
AF_UNSPEC, such assumption on L2 header size is unrelevant.
(On 15.4 the header size is variable anyway and cannot be known until
the frame is parsed).
Fixes#12982
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This was forgotten modification as commit 93e5181fbd came in master
though commit 0d519f7bcf was already written.
Thus fixing the missing lock/unlock.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though these are currently used by the core only, it will be then used
by net_context as well. This one of the steps to get rid of net_pkt's
appdata/appdatalen attributes.
Also normalizing all ip/proto parameters name to ip_hdr and proto_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that net_pkt are accessed through a common r/w API, using below a
net_pkt_cursor, let's have an option that will reset this cursor once
the net_pkt is freed.
Result is instead of segfaulting on r/w access, these operations will
bail out properly. Subsequent, and logical (unless you have a leak
which is another issue) net_pkt_unref will tell you who/where the pkt
was freed. Without it, you will get a segfault for instance, but that
won't tell you the exact reason. This options can help you then.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only next to be removed functions like net_tcp_set_checksum() are left
untouched. All the rest is switched.
Adding net_tcp_finalize() to follow the same logic as for UDP and else.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This proovse to drastically reduce runtime overhead as it does not need
to parse IP nor TCP header all over again in a lot of places.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As these were parsed already by IPv4/6 input functions let's use them.
Applying the change on trivial UDP usage. TCP usage will have its own
commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These will be specifically needed in TCP, as well as being used in
context internally.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since the rework of L2/L3 split, only L2 has access to its header. Thus
up to Ethernet one to set LLDP PTYPE.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This optimizes the memory quite a bit since we do not need to clone nor
split the original packet at any time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of the code had to be reworked due to the new API: it's more
logical to do everything sequentially (first headers, then MLD part)
than the contrary with inserting headers at the end.
Using get_data/set_data as well it makes the code clearer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, return a verdict instead of a pointer to net_pkt. It's simpler as
it will be up to net_send_data()'s caller to unref the net_pkt in case
of NET_DROP: less places where net_pkt can be unref.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
Introducing a generic struct to acces the common part of MLD queries,
instead of accessing part by part.
Also, returning NET_OK in case parsing went fine. We send an MLD report
anyway, so it's not a good idea to count the message as being dropped in
statistics.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
This part was heavier to change as it was not accessing the headers
directly but instead was read parts by parts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
Also taking the opportunity to normalize drop messages.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In nbr part, this is a useful information. Since net_icmpv6_input has
already parsed the icmpv6 header, let's get pass it, instead of
retrieving/parsing it again in various handler functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And let's use net_ipv6_create, net_icmpv6_create, net_ipv6_finalize to
factorize the code better.
Removing useless setup_headers private function now.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And let's use net_ipv6_create, net_icmpv6_create, net_ipv6_finalize to
factorize the code better.
De-clutter the code by reordering where src/dst are evaluated.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And let's use net_ipv6_create, net_icmpv6_create, net_ipv6_finalize to
factorize the code better.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unlike before, we allocate a new packet for the reply which is a
modified clone of the request.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV6_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new net_pkt API to proceed through IPv6 header and all the
extension header as well.
Use udp/tcp input functions relevantly, and call net_conn_input
afterwards.
Note: This commit temporarly disable IPv6 fragmentation support
in the code directly. Which support will be re-enabled afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is pretty much the same as in ICMPv4. Actually, when it comes to
the ICMP header, it could probably be put in a common places for both
ICMPv4 and ICMPv6.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Extension headers are specific and use nexthdr attribute from net_pkt.
next_header_proto is the user protocol (if any) that might require
finalization too (calculating the checksum).
However, if there are extension header, we need to skip those and jump
to the position where the user protocol starts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, store the actual next_hdr value and not it's position.
This permits to reduce net_pkt from some bytes.
Such field was unused until now, but it will be soon.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the IPv6 header. Once done, the cursor will be placed right
after the newly created IPv6 header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function names will be normalized then by the couple create/finalize.
This one only sets the checksum.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Verifying udp/tcp checksum should be done before calling this function.
Also, up to ipv4 and ipv6 to provide a pointer to their respective
header.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be the place where UDP header is parsed: its checksum verified
and src/dst ports grabbed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's now up to net_context to build the net_pkt and send it.
This will become the default.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not anymore up to user to provide the pkt. Context will build the
packet according to its metadata and provided buffer and length.
It currently supports only IPv4 and UDP.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unlike before, we allocate a new packet for the reply which is a
modified clone of the request.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV4_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function names will be normalized then by the couple create/finalize.
This one only sets the checksum.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As before, such header is meant to be in a contiguous area (beginning
of the buffer, only 20 bytes)
Opportunistically chaning the function name to net_ipv4_input() (all
will be create/finalize/input).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Newly received pkt can get their cursor intialized at net_recv_data()
(most of the time, drivers won't mangle with the content before calling
that function).
Right after l2 (net_if_recv_data()) parsing as well. L2s pull the
starting buffer after ll header. Instead of letting L2s updating the
cursor, it's simpler to reinitialize it directly after such parsing.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will avoid new API's writing functions to modify the packet's
content. For instance while checking its checksum etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new API where relevant. Only sam_gmac is left aside for now.
This simplifies a lot the code as the caller should only care about
allocating net_pkt and its buffer once, and thus will not need to mess
with "frags" etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is the easiest piece to change using the new API, and can be used
as showing how this API can be used.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the UDP header. Once done, the cursor will be placed right after
the newly created UDP header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the IPv4 header. Once done, the cursor will be placed right
after the newly created IPv4 header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These ones would support linearizing non-contiguous area, however
requiring a bit more complex type as an "accessor".
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a cursor into net_pkt. This is used to read/write data in a much
simpler way, for pre-allocated buffers in net_pkt. This avoids API users
to deal with net_buf below directly.
However, to be used - as for the new allocators - it will require deep
net stack core and API changes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These struct net_pkt allocators will give the possibility to allocate at
once the net_pkt and the buffer associated with, taking care of the
header space and MTU relevantly.
This enables to use the variable length allocator from net_buf. However,
it is not yet the default and is set as experimental.
As it is provided in parallel to existing allocators, it has to keep a
slab per-direction and thus a pointer in net_pkt, as well as appdata,
appdatalen etc... Resulting in "bloating" net_pkt. This will be solved
when, finally, former allocators will be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the net_app layer handled DNS support as a part of
network initialization. With the move to BSD-socket APIs,
we need to add support for DNS to the LwM2M library.
Signed-off-by: Michael Scott <mike@foundries.io>
This commit resets the firmware status to IDLE after a bad
download attempt. Previously, the firmware object would stay
in an odd state and any further attempts to download firmware
would return an error.
Signed-off-by: Michael Scott <mike@foundries.io>
We can save some resources by removing the periodic service thread
and replacing it by queuing the services to the work queue.
Before (reel_board using BT + DTLS)
Memory region Used Size Region Size %age Used
FLASH: 289464 B 1 MB 27.61%
SRAM: 75620 B 256 KB 28.85%
IDT_LIST: 136 B 2 KB 6.64%
After
Memory region Used Size Region Size %age Used
FLASH: 289576 B 1 MB 27.62%
SRAM: 74596 B 256 KB 28.46%
IDT_LIST: 136 B 2 KB 6.64%
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
For bootstrap support, we need to store connection credentials
in the security object. This way the client can start a connection
at index 0 and after bootstrapping, move to the next connection.
Let's add the needed fields and a config item to set the key length.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the parsing functions for JSON used by the JSON data
formatter and enable it in the LwM2M engine.
Signed-off-by: Michael Scott <mike@foundries.io>
The JSON formatter is currently not enabled for incoming WRITE
operations. To update the code in the formatter and not litter
the input context with extra data, let's allow formatters to
store their own user data.
Signed-off-by: Michael Scott <mike@foundries.io>
net_app contexts save the remote address and we use this during
observe notifications and pending handling. If we move to another
network layer such as sockets, then the remote address becomes
harder to reference. Let's save it as a part of the client
context.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
If the net_context functions are accessed from preemptive priority,
then we need to protect various internal resources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
After receiving FIN, the TCP stack will send a FIN and start
a timer to track the reception of the associated ACK. In case this
ACK is never received then the context will be released
without calling the associated received callback which leads to
upper layers not being informed that the connection was closed.
This issue was observed when using sockets, the effect is
that in this case the socket would never be closed and stay
in limbo forever.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The relationship between lwm2m_engine_context and lwm2m_message
has always been a tenuous one. Let's merge the 2 structures
into lwm2m_message and remove all of the extra stack variables.
This change increases SRAM usage slightly due to the
addition of the context structures to the multiple lwm2m_messages.
However, the way lwm2m_engine_context was being used off the stack
was probably creating hard to debug issues in the longterm.
Also, having all of the structures in 1 place makes sharing them
much easier later.
Signed-off-by: Michael Scott <mike@foundries.io>
Reported by Github user himanshujha199640 using coccinelle:
subsys/net/lib/lwm2m/lwm2m_obj_device.c:172:5-16:
WARNING: Unsigned expression compared with zero.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/11135
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The "net iface" net-shell command printed "<unknown type>" for
OpenThread based technology. After this commit, the network
interface type is set to "OpenThread".
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The old and deprecated net-app based MQTT library is removed.
See the BSD socket based MQTT library for a replacement.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The previous commit replaced the net_pkt element ref with an element
atomic_ref. CI tests turned up more places where ref was used directly.
This commit converts them to use the new element.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
It has been observed that some network drivers, f.ex. the SAM E70 GMAC,
call net_pkt_unref from inside the interrupt that signals the successful
transmission of a packet. This conflicts with the net_pkt_unref call
made by ethernet_send after the packet has been given to the driver.
We fix this by using an atomic_t to hold the reference count as there
might be other, difficult to find cases of net_pkt_(un)ref being used
across threads and interrupts.
The name of the element has been changed from "ref" to "atomic_ref" to
cause a compile error when code still has not been converted to use the
atomic_* functions.
Fixes#12708
Signed-off-by: Daniel Glöckner <dg@emlix.com>
The implementation code itself should not rely on plain POSIX names
and use zsock_ and ZSOCK_ prefixed versions of symbols.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Mark automatically and statically configured mesh-local addresses
with mesh_local flag, so that they are not used as a source for
off-mesh destinations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit introduces a concept of mesh-local IPv6 addresses. Such
addresses should only be used for mesh-local communication, therefore
should not be used to communicate with different subnets (i. e.
destinations outside the mesh).
As `addr_type` field already holds different kind of information
(whether address was created automatically/manually) it was not used in
this case.
Instead a mesh_local flag was added, so that we do not lose information
on how address was created. Address with such flag set will only be
selected as a source address automatically if the destination address
is within the same subnet it belongs to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is the same as net_buf_pull(), except that instead of returning
the new buf->data it returns the old buf->data. This was recently
discussed in github issue #12562.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In OpenThread RLOC address and ALOC address are used for internal mesh
routing and should not be used by applications as they can change
dynamically during runtime. Therefore prevent registering them on Zephyr
interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
struct timeval is per POSIX defined in sys/time.h, but that also
allowed to pull sys/select.h (and indeed, it does with native_posix),
which then starts to conflict with out select implementation (if
NET_SOCKETS_POSIX_NAMES is defined, and many samples/tests have it).
So, for now follow the existing route of duplicating all definitions
needed by our code in namespaced manner. Things like struct timeval
usage will need to be revisited later, when we'll want socket
subsystem to work with POSIX subsystem, but that's a separate deep
matter.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's implemented on top of poll() anyway, and the current
implementation of fd_set uses array of fd's underlyingly, which
leads to O(n) complexity for FD_SET() and friends.
The purpose of select() implementation is to allow to perform
proof-of-concept port of 3rd-party code to Zephyr quickly. For
efficiency, poll() should be used instead.
Fixes: #11333
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
OpenThread commissioner feature has extra stack requirements, hence
increase it in this configuration.
Fixes#12455
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Two issues identified with 6lo fragmentation for ieee802154 that broke
the communication:
1) ieee802154_fragment_is_needed function did not take 15.4 FCS size
into account, hence taking wrong decision in some cases.
2) set_up_frag_hdr was writing with wrong offset, which resulted in 6lo
bytes being overwritten by 15.4 header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Each time a successfully TCP connection is done, the number of dropped
TCP packets increases by 2. This is happens because when receiving an
initial SYN packet, or an ACK packet following a SYN+ACK packet,
NET_DROP is returned even if there is no error.
Fix that by replacing the two corresponding "return NET_DROP" by
"net_pkt_unref(pkt)" followed by "return 0".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
net_buf_linearize() used to clear the contents of output buffer,
just to fill it with data as the next step. The only effect that
would have is if less data was written to the output buffer. But
it's not reliable for a caller to rely on net_buf_linearize() for
that, instead callers should take care to handle any conditions
like that themselves. For example, a caller which wants to process
the data as zero-terminated string, must reserve a byte for it
in the output buffer explicitly (and set it to zero).
The only in-tree user which relied on clearing output buffer was
wncm14a2a.c. But either had buffer sizes calculated very precisely
to always accommodate extra trailing zero byte (without providing
code comments about this), or arguably could suffer from buffer
overruns (at least if data received from a modem was invalid and
filled up all destination buffer, leaving no space for trailing
zero).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Connecting to a non-open port causes connect() to hang forever.
This patch releases connect() to return error to the caller.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
Accepting broadcast echo request and replying to it could provide an
attack vector.
Fixes#12162
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Do not extra ref and then obscurely unref the packet inside
the statistics update function.
Actually, this extra ref/unref isn't needed here at all.
The packet is unreferenced only on a successful send, statistics
updating can be done before the unref in a clean and understandable way.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Try to catch the original caller of setup_gptp_frame() function
in order to see who is allocating buffers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The NET_LOG_LEVEL is enabled also when allocation debugging is
enabled but when net_pkt debugging is not. Thus we need to use
the CONFIG_NET_PKT_LOG_LEVEL when printing normal debug log
prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_frag_linearize() is just a wrapper for net_buf_linearize(). As
the latter was refactored to never return error, and instead just
return actual copied length, update the former and its usages too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Don't try to find "errors" in the values of dst_len and len params
passed to net_buf_linearize(). Instead, do what entails with the
common sense from the values passed in, specifically:
1. Never read more than dst_len (or it would lead to buffer
overflow).
2. It's absolutely ok to read than specified by "len" param, that's
why this function returns number of bytes read in the first place.
The motivation for this change is that it's not useful with its
current behavior. For example, a number of Ethernet drivers linearize
a packet to send, but each does it with its own duplicated adhoc
routine, because net_buf_linearize() would just return error for the
natural use of:
net_buf_linearize(buf, sizeof(buf), pkt->frags, 0, sizeof(buf));
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No declar 'count',Enable CONFIG_NET_DEBUG_HTTP_CONN will build error.
Using http_monitor_count replace count.
Fixed#12329
Signed-off-by: Frank Li <lgl88911@163.com>
shell_fprintf() doesn't work in callback handlers.
To fix that, set shell state to SHELL_STATE_COMMAND before using it.
Fixed: #12347
Signed-off-by: Frank Li <lgl88911@163.com>
Currently OpenThread commands have to be prefixed in the shell by "ot
cmd", for example "ot cmd state". With the new shell, it is possible to
remove one subcommand level and change it to "ot state".
At the same time validate the number of arguments using
SHELL_CMD_ARG_REGISTER and improve the help message.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Following the introduction of the new shell, the OpenThread shell
wrapper is not well integrated. It outputs the answer to a command using
printk(), which is not necessarily using the same device than the shell
if "zephyr,console" does not match "zephyr,shell-uart".
OpenThread calls the otConsoleOutputCallback() function to output the
answer to the shell. It can provide a callback argument, but defined
when OpenThread is initialized, not when the command is submitted.
Workaround that by taking a copy of the shell argument in a static
variable and use it for the call to shell_fprintf(). It is not perfect
if two or more shells issue concurrent commands, but is already an
improvement compared to printk().
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Introduced by commit id de78a7af28.
If the sum is 0xffff, a ~sum will give 0.
Fixes#12164
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The patch allows to enable logs for NET_RAW configuration.
For example using wpanusb currently breaks build with logging enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When walking through the coap resources in coap_handle_request, return
-EPERM if a resource exists but does not have the request method. This
allows the caller to catch the error and return a 4.05 message.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The slab2str function which is used in the debug log call is not defined
unless NET_LOG_PKT_LOG_LEVEL >= LOG_LEVEL_DEBUG.
It looks like this change was accidentally introduced in #11374.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Update zephyr integration of openthread to latest api as of 2018-12-17:
2a75d30684
Both echo_server and echo_client compile and are operational.
Signed-off-by: Martin Turon <mturon@google.com>
Currently there is a mixed approach in prefixes from mbedTLS
configuration (MBEDTLS_ and TLS_). The latter was used in generic config
file and could bring up confusion that it can only be used with TLS
subsystem. Hence unify the approach to MBEDTLS_ prefix to avoid such
confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Moving towards serialized fragmentation, adapting mac command creation
to avoid the need of ll_reserve etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will permit to avoid the need for ll_reserve.
It also removes net_buf allocation and deletion, as it works per-frame.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fragmentation has nothing to do with 6lo. Up to the bearer to do so.
This change is required for futur serialization of 15.4 fragmentation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ll reserve is of no use as the l2 is allocating what it needs for
filling in its header.
This is another step forward to removing ll reserve concept.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need to reserve any space for each frag, as the l2 will
allocate a frag for the ethernet header, arp will do the same.
This is one step further to removing the concept of ll reserve.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-shell "net allocs" command should print network buffer
allocations even if network packet debugging is not enabled.
This is how it used to work earlier but the behaviour got lost
at some point. So user needs to set CONFIG_NET_DEBUG_NET_PKT_ALLOC
in order to see the buffer allocations. The option will be enabled
by default if network packet log level is set to DBG.
The reason for a separate option is that the network packet debug
logging prints just too much data and it is very difficult to
track allocations when that happens.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As extend fdtable usage to more cases, there regularly arises a need
to forward ioctl/fcntl arguments to another ioctl vmethod, which is
complicated because it defined as taking variadic arguments. The only
portable solution is to convert variadic arguments to va_list at the
first point of entry from client code, and then pass va_list around.
To facilitate calling ioctl with variadic arguments from system code,
z_fdtable_call_ioctl() helper function is added.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make sure that the link delay (propagation time) is calculated
same way as how Avnu/gptp is doing it with checks for rate ratio.
This is done like this in order to behave same way as their gptp.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is useful info as otherwise we get no indication to user
if the packet is not created and not sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Neighbor rate ratio cannot be 0 as that would mean 0 packet
delivery time which is not plausible.
Add also some debugging to print current neighbor propagation
delay value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pdelay_allowed_lost_resp_exceed_count was updated even if we
had received pdelay response.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
All IPv4 destination address related drop reasons in one place.
This helps also to have one unique call of net_conn_input().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for IPv4, net_conn_input() can be called at one place for udp/tcp.
It will anyway check if given protocol is enabled so no need to check
such support here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was weird to pre-parse ICMPv6 headers in IPv6. Moreover parsing
failure of such header would not generate the right statistic.
Instead, centralizing all into net_icmpv6_input relevantly, and adapting
the test cases which were using that function. In RPL test, removing the
dummy dio test was simpler since dio is anyway tested later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Increase the net_buf length in proper places. So when gPTP
header is added, increase the buf->len properly, and then
when gPTP packet type is added, increase it again properly.
This way the net_buf length is updated in more logical way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If relevant configs are not enabled shell allocs command would print
wrong info:
"Enable CONFIG_NET_DEBUG_NET_PKT to see allocations"
CONFIG_NET_DEBUG_NET_PKT is obsolete and an undefined symbol, setting it
causes cmake to fail. This patch fixes this issue by printing up-to-date
information on how to enable allocs command
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
This commit reworks socket poll implementation to support multiple
socket implementations.
To achieve that, two ioctl poll helper requests were added:
ZFD_IOCTL_POLL_PREPARE and ZFD_IOCTL_POLL_UPDATE. The poll
implementation calls ioctl with these requests for each socket
requested in the fds table.
The first request is responsible for preparing k_poll_event objects
for specific socket. It can request to skip waiting in k_poll by
returning EALREADY through errno.
The latter request is responsible for processing outcome of k_poll for
each socket. It can request to retry the k_poll by returning EAGAIN
through errno.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement extended socket vtable for TLS sockets, therefore allowing to
integrate the implementation with socket subsystem.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit extends socket vtable, allowing to redirect socket calls to
alternate implementations (e.g. TLS sockets).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The state2str() function should only be used if debugging
is enabled thus add some pre-processor checks there.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print function and line number when changing state and when
debugging is enabled. Otherwise it is a bit difficult to follow
the program logic and locate the state change operation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the msg parameter for PRINT_INFO() is always a const string
that is not coming from stack, there is no need to use
log_strdup() here. This helps to avoid the
"<log_strdup alloc failed>" messages.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Common statistics should be updated in one centralized place and
ethernet_send is the right place for tx stats, as well as ethernet_recv
for rx stats.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just recalculate the chksum without resetting its value to 0, and test
if return value is 0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net_dhcpv4_stop() function stops the event listener for any IF_UP
events previously. In case multiple interfaces are used and optionally
being switched over, it could result in disabling dhcp unintentionally.
The callback is initialized at the init function and added/removed in
the start/stop function based on the interface list being empty
or not. (first added, last removed)
The event handler checks if the interface is in the list before acting
on it.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
In case "net_dhcpv4_stop(..) is called when the interface is
in NET_DHCPV4_RENEWING state, the address is not removed.
When deleting the address in the NET_DHCPV4_RENEWING state
means the status is always equal to the moment before _start
is called.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
No need to store/reset/recompute the chksums, only compute it again and
if it's not 0: drop the packet.
RFC 1071:
"To check a checksum, the 1's complement sum is computed over the
same set of octets, including the checksum field. If the result
is all 1 bits (-0 in 1's complement arithmetic), the check succeeds."
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4, ICMPv4/6, UDP, TCP: all checksums are meant to be one's complement
on a calculated sum. Thus return one's complement already from the right
place instead of applying it in each and every place where
net_calc_chksum is called.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add missed out helper functions to update the errors.tx and error.rx
in the stats structure.
Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com>
Signed-off-by: Nirav Parmar <niravparmar@zilogic.com>
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
gPTP subsystem was calling pow(x,y) function with X and Y being
constants; these are replaced with the pre-computed values.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
1. Clarify message telling that the actual packet length fed by the
driver differs from what specified in IPv4 header, and that leads to
drop.
2. Debug log any dropped packets in general.
These changes come from the experience of developing a networking
driver, where figuring out why packets get dropped may require
quite a head-scratching.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we receive extra data at the end of the IP message, then
discard that data and accept the packet.
Fixes#11649
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Such sent flag is in a union in net_pkt, shared with a gptp flag.
Tweaking it when the family is not AF_INET or AF_INET6 will generate
corrupted gptp packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of redoing what Ethernet L2 already does, let just create the
gptp message without any Ethenet header. Which one will be done as
sending phase by Ethernet L2 relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for Ethernet, up to ieee802154 L2's send to actually sent the packet.
It's currently unoptimized as 6lo compression, 15.4 fragmentation and so
on will reallocate net_buf etc... but it's the first step towards
removing ll reserve space and more.
Applying changes to Openthread L2 as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that sending is done at last time, in one pass, no need to go
through net_if_send_data here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, first part is done in L2's send, then the next one in
ethernet device driver net_if send function. That last one was already
moved to a L2 based implementation. Let's just move forward and place
the whole logic of the L2's send in that second function.
This is the first step, ethernet centric only, to move towards a
one-pass sending logic in net stack. In future, net_if's send will
disappear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current code generating Ethernet header is scattered all over the place,
sometimes in functions that are supposed to check something (and not
filling the header). Not to say about innefficiency.
Src ll address does not need to be set in L2 as net_if.c handles that
already.
Broadcast dst ll address is the same in ipv4 or ipv6, thus factorizing.
In each case, multicast is filled in only at the relevant place.
This is the first step towards changing L2 sending logic, when L2 send
API function will be the only point of sending. The redirection from
driver to L2 again (which finally uses the right device API function to
send) it a temporary hack.
This simplifies the code but will also enable using statically
allocated net_buf and ethernet header payload buffer afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is currently unoptimized, as all frags are allocated with relevant
ll reserve for such header space. However, this is the first step
towards getting rid of that ll reserve concept everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
MQTT packet_length_encode function accepts NULL buf argument, therefore
it cannot be dereferenced without a check.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
mqtt_connect was not releasing mutex after successfull connection.
Reworked the code to have a single exit path with mutex unlock.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
net_udp_get_hdr() function returns NULL on failure. Therefore
handle its return value to avoid potential NULL dereference.
Fixes#11485
Coverity-CID: 189738
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
The _net_app_sprint_ipaddr() was calling log_strdup() when
creating the debug print string. This is not correct as
the log_strdup() can only be used when calling the logging macro
to print strings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As per RFC1112 sec 6.2 "A host group address must never be
placed in the source address field or anywhere in a source
route or record route option of an outgoing IP datagram."
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If ARP Request with sender IP address set to localhost then drop
the request.
Fixes#11489
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If network stack found ARP entry for peer address, then it
tries to send pending IP packet. But it always keeps ptype
as ARP only. In this particular scenario it has to be IP
packet.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Networking stack sometimes try to find source address based
on destination address. If interface could not find best match
then it returns unspecified address (0.0.0.0). Host should not
send these packets.
IPv4 reply related issues fixed.
Fixes#11329
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Implements setsockopt() for the socket offload driver
to process the TLS tags sent in via the Zephyr setsockopt() API,
when CONFIG_NET_SOCKETS_SOCKOPT_TLS is chosen.
For each tag, the credential filenames are retrieved and
set via SimpleLink's sl_SetSockOpt() API.
Also, creates a new KConfig option for TLS_CREDENTIAL_FILENAMES.
This new option is used by apps/protocols to add TLS credentials
via filenames referring to the actual content stored on a secure
file system or flash.
Handles the IPPROTO_TLS_* socket protocol families in the
socket() offloaded API.
This was validated on the cc3220sf_launchxl with the http_get sockets
sample, with the globalsign_r2.der file loaded to secure flash via
the TI Uniflash tool, and using the TI Catalog of known good
root CA's.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
net_rpl_get_interface() function which returns always NULL is
defined if NET_RPL is not enabled. so remove deprecated tag to
this particular function. Otherwise it will cause unnecessary
compilation warnings.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When resending data, we need to always check pending status first.
If the pending check returns an "expired" status, avoid sending the
data to L2 network driver entirely.
This change fixes a use after free issue, where the L2 network driver
was still handling a packet that was expired out from under it when
the pending status was checked.
Signed-off-by: Michael Scott <mike@foundries.io>
During firmware transmit timeout, we rely on the pending packet data to
reconstitute the token and token length. At this point the pending
structure may be cleared out due to multiple retries. To avoid getting
a zero token, let's use the token data from the original msg structure
instead.
Signed-off-by: Michael Scott <mike@foundries.io>
We are using msg->cpkt.pkt as the net_pkt pointer in the call to
net_app_send_pkt(). Let's keep the code clean and not expose
ourselves to "out of order" issues, by also using msg->cpkt.pkt
in the error handling unref call.
Signed-off-by: Michael Scott <mike@foundries.io>
During the retransmit cycle we take ref on the outgoing packet,
only to immediately unref it. Originally, this was to make sure
the net_context handling didn't get rid of the packet when
sendto() is called. But after checking, the ref counter is never
in danger of going to 0 at this point in the code, so the
added ref handling is useless.
Signed-off-by: Michael Scott <mike@foundries.io>
Add some extra space to the color resource buffer, to allow more
exotic and application-specific color spaces.
Signed-off-by: Marti Bolivar <marti@foundries.io>
File descriptor I freed automagically when using POSIX subsystem's
close() function, but any subsys-adhoc functions like zsock_close()
should do that explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add new, socket based MQTT implementation, based on MQTT from Nordic
nRF5 SDK, introducing the following features:
* transport independent MQTT logic, with support for multiple transports
* support for multiple MQTT versions (3.1.0 and 3.1.1 supported)
* single event handler - no need to keep callback array in RAM
* automatic send of Ping Requests, for connection keep-alive
* message/event parameters wrapped into strucutres - easier extension
for future MQTT versions
* no separate thread needed to run MQTT - application only needs to call
mqtt_input and mqtt_live periodically
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With FD table introduction, net_context can no longer be reached by
typecasting socket descriptor. Instead, file descriptor API have to be
used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ztls_setsockopt and ztls_getsockopt returned error codes instead of
setting errno in particular cases. This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In earlier commit 15e7e3ea4 ("net: ip: Split debug prints into
smaller pieces"), the net_pkt debug prints were split to two
lines because of the argument count limitation in logging system.
As the logging subsystem increased the limit count in
commit 62d011549a ("logging: Support for up to 15 arguments in log
message") we can restore the original version as it is easier
to read.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Pass the promiscuous mode OFF event properly to device driver
instead of just toggling the network interface flag.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Flush the promiscuous queue after all the clients have turned
off promiscuous mode. This makes sure that we do not leave any
RX packets hanging on the queue and waste memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ARP header contains invalid fields then drop the packet.
Fixes#11257Fixes#11254Fixes#11253Fixes#11248
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Introduce new Kconfig option for selecting either slip or ethernet
connectivity to host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Verify incoming ARP packet hardware and protocol type. Drop
unknown type of packets.
Fixes#11215Fixes#11217
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
FD method tables contain function pointers, and thus should be
const and reside in ROM. This patch fixes all cases of FD vtable
definitions: for POSIX FS API and for sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we change the ethernet MAC address, then we must also remove
the old IPv6 interface identifier (iid) address from the
interface. Otherwise there might not be enough space in the IPv6
address array for the new iid address and beside the old iid
address is not useful any more after the MAC address is changed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that IPv4 specific functions are callable even if
IPv4 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that IPv6 specific functions are callable even if
IPv6 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to evaluate what's the ll reserve size here as net if has a
function to do so.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the destination IPv6 address is interface local scope multicast
address FF01::, then loopback those packets back to us as that is
the purpose of those addresses. They are to work same way as
localhost unicast address. See RFC 3513 ch 2.7 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 is disabled, then we can skip IPv6 checks and avoid
Coverity warnings. Same thing for IPv4.
Coverity-CID: 189506
Fixes#11100
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously the "socket file descriptors" were just net_context
pointers cast to int. For full POSIX compatibility and support
of generic operations line read/write/close/fcntl/ioctl, the
real file descriptors should be supported, as implemented by
fdtable mini-subsys.
Socket implementation already has userspace vs flatspace dichotomy,
and adding to that ptr-fds vs real-fds dichotomy (4 possible cases)
is just too cumbersome. So, switch sockets to real fd's regardless
if full POSIX subsystem is enabled or not.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that ICMPv6 checksum is correct before continuing
processing the packet.
Fixes#10971
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with organisation scope multicast
address FF08:: then we must drop it as those addresses are
reserved for organisation network traffic only.
Fixes#10961
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with site scope multicast
address FF05:: then we must drop it as those addresses are
reserved for site network traffic only.
Fixes#10960
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with interface scope multicast
address FF01:: then we must drop it as those addresses are
reserved for local network traffic only.
Fixes#10959
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For Bluetooth, the link address is set only after the Bluetooth
connection is established. Because of this, place the link address
check to net_if_up() because at that point the link address should
be set properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There's a lot of code which assumes net_if_get_link_addr(iface)->addr
Forgetting to set it leads to deferred, spectacular crashes. It's
impractical to assert it on every usage. So, instead let's assert
it after call to driver->init(), as that is supposed to set it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixes following warning:
...
subsys/net/lib/dns/llmnr_responder.c:24:0:
subsys/net/lib/dns/llmnr_responder.c: In function ‘recv_cb’:
include/net/net_pkt.h:1203:9: warning: ‘addr’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
return net_pkt_append(pkt, len, data, timeout) == len;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
subsys/net/lib/dns/llmnr_responder.c:306:14: note: ‘addr’ was declared
here
const u8_t *addr;
^~~~
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes warning:
warning: ‘ipv6’ defined but not used [-Wunused-variable]
static struct net_context *ipv6;
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We must drop packet that is received from outside and which has
IPv6 loopback address (::1) either as a destination address or
source address.
Fixes#10933
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CoAP library is migrated to support over socket based
applications or other higher layer protocols. Most of the
API's and functionality is kept as it is except few changes.
net_pkt/net_buf is removed from CoAP library. Now it expects
a pre-allocated flat buffer and length. If there is not enough
space to append any data, library simply returns an error.
It's user's responsibility to allocate and free memory.
One change in functionality is, earlier coap_pending_clear()
used to clear the memory, but now it's user's responsibility
to free the memory.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ICMPv4 checksum is not optional and thus cannot be zero. Hence, drop
packet with invalid zero ICMPv4 checksum.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
If we receive an IPv4 that has broadcast destination address, then
properly handle it.
This means that for
* ICMPv4, if CONFIG_NET_ICMPV4_ACCEPT_BROADCAST is set (this is the
default value) and we receive echo-request then accept the packet.
Drop other ICMPv4 packets.
* TCP, drop the packet
* UDP, accept the packet if the destination address is the broadcast
address 255.255.255.255 or the subnet broadcast address.
Drop the packet if the packets broadcast address is not in our
configured subnet.
In sending side, make sure that we do not route broadcast address
IPv4 packets back to us. Also set Ethernet MAC destination address
properly if destination IPv4 address is broadcast one.
Fixes#10780
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function that returns true if given IPv4 address is
a broadcast address. This will be used in later commits to check
received packet IPv4 source and destination addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove extra ntohl() calls when checking IPv4 address against
a subnet address.
Convert also the IPv4 address to be const as the netmask related
functions do not change its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Cache the used transport protocol in net_pkt. This way we can
avoid traversing IP header to get the last protocol in network
packet. This is mostly an issue in IPv6 which can have a long
list of extension headers after IPv6 header and before the
transport protocol header.
Fixes#10853
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the wifi shell needed to remove the quotes from the
SSID parameter, passed in by the underlying shell.
The new shell is now able to parse quoted strings as arguments,
so this adjustment can be removed.
Otherwise, it results in a failure to connect to an AP, as the first
character of the SSID name is stripped off.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Wrong Kconfig template was used for max debug level which caused
the max level to be the default level (ERROR). This prevented
all debug prints from showing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_buf log level Kconfig setting was using template from
networking, which might not be available for Bluetooth code.
This caused the log level to be ignored.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The maximum log level was using wrong template which caused
the max value to be ignored.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CONFIG_NET_DEFAULT_LOG_LEVEL template entry was only partially
fixed earlier and some spaces were not there around "=".
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current TLS socket implementation assumed that PSK ID stored in
credential manager is NULL terminated. It's actually better to store
only the string content, as the string length is stored as well. This
approach is less confusing, when a user is not operating on C strings
but on a non-NULL terminated byte array.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When DBG level for CONFIG_LWM2M_LOG_LEVEL is disabled, a compiler
warning is generated:
In file included from include/logging/log.h:11:0,
from subsys/net/lib/lwm2m/lwm2m_engine.c:28:
subsys/net/lib/lwm2m/lwm2m_engine.c: In function ‘engine_add_observer’:
subsys/net/lib/lwm2m/lwm2m_engine.c:558:3: warning: implicit
declaration of function ‘sprint_token’
[-Wimplicit-function-declaration]
sprint_token(token, tkl), lwm2m_sprint_ip_addr(addr));
^
Let's remove the #if guards around sprint_token() and let
the Linker remove it when not needed.
Signed-off-by: Michael Scott <mike@foundries.io>
It is possible that connect callback is called when shell is not
yet set. Make sure to check this and fallback to use printk() if
shell_printf() cannot be used.
Fixes#10617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The connect command parameters were not checked properly if
user decided to supply only mandatory parameters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the device does not support wifi offloading, then return -ENOTSUP
so that wifi support can be enabled for testing purposes even if
the actual device does not have wifi support. This is happens for
example in qemu which does not support wifi offloading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we define and declare the _net_app_register() and
_net_app_unregister() functions properly if net_app logging level
is set to debug.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Typo when calculating new value for local_time_n.low, the calculation
was just a constant expression and the value was not modified.
Coverity-CID: 188759
Fixes#10568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The connection index was printed incorrectly in debug print.
Coverity-CID: 188742
Coverity-CID: 188753
Fixes#10583#10574
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes the compile error when CONFIG_NET_PKT_LOG_LEVEL
is LOG_LEVEL_DBG.
> subsys/net/ip/net_shell.c: In function ‘context_info’:
> subsys/net/ip/net_shell.c:2893:106: error: ‘struct net_buf_pool’
> has no member named ‘avail_count’
> subsys/net/ip/net_shell.c:2893:125: error: ‘struct net_buf_pool’
> has no member named ‘name’
In struct net_buf_pool, 'avail_count' and 'name' are depends on
CONFIG_NET_BUF_POOL_USAGE.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Check for NULL IPv6 addr values from net_if_ipv6_get_ll() in rpl.c
If NULL, print out an error statement stating that no proper IPv6
address was found
Coverity-CID: 188169
Fixes#10094.
Signed-off-by: Satya Bhattacharya <satyacube@gmail.com>
This flag is an indication to the timer driver that the OS doesn't
care about rollover conditions of the tick count while idling, so the
system doesn't need to wake up once per counter flip[1]. Obviously in
that circumstance values returned from k_uptime_get_32() are going to
be wrong, so the implementation had an assert to check for misuse.
But no one understood that from the docs, so the only place these APIs
were used in practice were as "guards" around code that needed to call
k_uptime_get_32(), even though that's 100% wrong per docs!
Clarify the docs. Remove the incorrect guards. Change the flag to
initialize to true so that uptime isn't broken-by-default in tickless
mode. Also move the implemenations of the functions out of the
header, as there's no good reason for these to need to be inlined.
[1] Which can be significant. A 100MHz ARM using the 24 bit SysTick
counter rolls over at about 6 Hz, and if it had to come out of
idle at that rate it would be a significant power issue that would
swamp the gains from tickless. Obviously systems with slow
counters like nRF or 64 bit ones like RISC-V or x86's TSC aren't
as affected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Recently, the wifi net offload driver has been asserting
as init_iface() was checking for api->send != NULL, even in
the case of NET_OFFLOAD
This patch suggests a fix to handle the NET_OFFLOAD case.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
If we receive a valid gratuitous ARP request, then update ARP
cache accordingly. This feature is optional and by default
it is enabled, but can be turned off if needed.
This is similar to a feature available in Linux, and is enabled
by default in many distros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The wifi mgmt does only support TCP/IP offload wifi chip,
while non-offload wifi chip can not scan/connect to AP.
Signed-off-by: Dong Xiang <dong.xiang@unisoc.com>
Placing it at sys/fcntl.h was due to mimicking internal newlib's
layout, but what we need is this file at the standard location,
for reuse.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit fixes the issue that if a thread is waiting on recv for
data and the user closes the socket, the waiting thread is not
unblocked.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The wifi management interface was still using one SYS_LOG_DBG
macro call, replacing that with NET_DBG.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was trying to print peer IP address string but that
pointer could contain garbage. There is actually no need to print
anything in this case, the error code return is enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently logging subsystem supports quite small number of function
parameters. So split some long functions into smaller pieces.
Hopefully this is just a temporary patch and we can support more
parameters to logging macros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The last parameter is 'period', we should not pass duration twice.
Doing so makes zephyr hang with current mainline when it is chosen to be
the Grand Master.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Completely remove the last_sync_receipt_timeout time. It is not part of
the standard (see 802.1AS-2011, 10.2.11 for the complete list of
variables for this state machine). Additionally this extra variable was
never really initialized so the calculated duration made no sense.
Just start the timer based on the regular sync receipt timeout time
interval from the port data set.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commits adds a possibility to select PTP clock accuracy through
KConfig.
The chosen accuracy should reflect the capabilities of the used
hardware.
See IEEE 1588-2008, chapter 7.6.2.5 for more details.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implements GMCAP-1, GMCAP-2, and GMCAP-3 and their dependencies from
802.1AS-2011. See Annex A.10 for more details.
The Grand Master Capability can be turned on and off through KConfig.
Note: the correction field in FUP packets is not yet properly
calculated. There is a TODO left in the code, near which some parameters
are zeroed to make the correction field be set to 0. This mimics the
behavior of openAvnu (a Linux gPTP client). For full compliance the
field should be calculated and set properly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Optimize memory usage of enums that are used within structs.
Reorganize the affected structs to avoid holes.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
SyncReceiptTime should use an ExtendedTimestamp (with fractional
nanoseconds precision). Add a struct with the definition of the needed
type and convert that variable.
The struct representing the ExtendedTimestamp is named
net_ptp_extended_time to keep consistency with the existing net_ptp_time
which is used for regular PTP timestamps.
See 802.1AS-2011 chapters 10.2.3.4 and 6.3.3.5 for more reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There are other ClockMasterSync state-machines (to be implemented).
Current name would either cause conflicts or be too ambiguous.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
In coap_option_value_to_int function, when coap option length is 4,
option->value[3] should be shifted by 0 rather than option->value[2].
This doesn't affect the behavior of function but needs to be fixed.
In coap_append_option_int function, when the value is between 0xffff
and 0xffffff(when option length is 3), bit shift operation is wrong.
For example, if the value is 0xABCDEF, by sys_put_be16(val, data)
data[0]=0xCD, data[1]=0xEF, by val >> 16, data[2]=0xAB. So the result
becomes 0xCDEFAB not 0xABCDEF. So, to sys_put_be16 function hand
&data[1] over instead of handing data over and val >> 16 needs to be
set to data[0], not data[2].
Signed-off-by: Taehwa Kang <hegrecomm@gmail.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
pkt properties should be set prior to routing.
If packet routing is turned on and the packet is
forwarded to an interface, the pkt properties like
ipv6_ext_len or ip_hdr_len will not be initialized.
If a UDP packet is forwarded to an 6lo interface,
it leads to incorrect calculation of UDP header
during UDP header compression (net_udp_get_hdr).
Fixes#10204
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the neighbour does not exists, then the route to it cannot
be deleted so we can return error to caller in that case.
Coverity-CID: 188173
Fixes#10090
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In net_route_add(), do not try to print route information if
route to neighbor is not found.
Coverity-CID: 188172
Fixes#10091
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the destination address to select the proper network interface
when binding. The default network interface cannot be used here
as then the packet might be sent to wrong network interface.
Fixes#9935
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There is now a proper function to select the right source IPv4
address when sending a mDNS packet so use it instead of selecting
the address directly from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sync timeouts were calculated incorrectly - this led to a 'Multiple
Masters Issue' as denoted by PTP debugging software.
See 802.1AS-2011, chapter 10.2.4.2 for reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Fix the formula listed in help messages which is used to calculate
actual intervals given their log2 values.
It is all calculated properly in the code, because the unit of the
actual field uses the UScaledNs type of which the unit is 2^(-16)ns, so
it is just the help messages that got it wrong.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
When no certificate-based ciphersuites are used, mbedTLS compiles out
hostname field and associated functions from its SSL context. This
resulted in compilation error when only PSK-based ciphersuites were
configured.
This commit resolves the issue by compiling-out hostname-related code
from secure sockets implementation on the same basis as mbedTLS does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The result of both printk and vprintk are not used in any place.
MISRA-C says that the return of every non void function must be
checked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
sockets_tls subsystem uses entropy driver, yet it does not include
entropy header. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- Up to net_context to give the source port.
- net_udp_append is unused anywhere: let's remove it.
- left over macros on _raw versions removed as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch enables BSD socket offload to a dedicated
TCP/IP offload engine.
This provides a simpler, more direct mechanism than going
through NET_OFFLOAD (zsock -> net_context -> socket conversions)
for those devices which provide complete TCP/IP offload at the
BSD socket level, and whose use cases do not require
IP routing between multiple network interfaces.
To use, configure CONFIG_NET_SOCKETS_OFFLOAD=y, and register
socket_offload_ops with this module.
Fixes#3706
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
*_ll_src/*_ll_dst/*_ll_swap/*_ll_if were not self explanatory, ll
meaning "link layer" it's ambiguous what the names meant.
Changing to:
*_lladdr_src/*_lladdr_dst/*_lladdr_swap/*_lladdr_if to fix this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Even though the net_buf implementation may (and does currently)
internally use u16_t for lengths, keep the public facing API
consistent by using size_t.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes the net_buf_append_bytes() API consistent with all other
net_buf APIs that take a pointer to arbitrary data.
Fixes#9283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add RX API to LLDP. Caller should register callback which is called
from ethernet_recv().
Fixes#9407
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The new "net ipv6" command which will print general IPv6 configuration
and information about autoconfigured IPv6 addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_if_ipv6_prefix_get() function will return the proper prefix
for a given IPv6 address and network interface. This is used when
checking which source address should be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor IPv6 address lifetime timer setting in net_if_addr to support
longer lifetime than 24 days.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using sizeof() is a common best practice in C, because it allows to
adjust size in one place instead of many.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The gptp stack size was not properly set, one must use
the K_THREAD_STACK_SIZEOF() macro to calculate stack size.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For ease of maintenance, let's swap the reader/writer initialization
syntax to:
.put_begin = put_begin,
.put_end = put_end,
...
This way we only assign used fields and adding new ones later is
less error prone.
Signed-off-by: Michael Scott <mike@foundries.io>
We set "insert" to true when the value is already in the buffer, but
we need to insert a TLV to denote things like RESOURCE_INSTANCE or
OBJECT_INSTANCE. In this case, let's not re-add the value.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's implement put_begin/end_oi functions in the TLV formatter
so to mark the boundry of an object instance when more than 1
object instance is returned.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/9470
Signed-off-by: Michael Scott <mike@foundries.io>
In order to re-use the put_begin_ri / put_end_ri logic, let's create
generic functions for them: put_begin_tlv and put_end_tlv
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, we only save the resource id of the incoming path setting.
In the future, we will need to change other values in order to process
multi-instance READ operations.
Let's save and restore the entire path only at the beginning and end
of processing.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters may need to process data at the beginning and end of
each object instance and/or resource. Currently, they can only add
processing at the beginning and end of resource instances.
Let's establish put_begin/end_oi (object instance) and put_begin/end_r
(resource) API functions that data formatters can use for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Optimize the resource processing loop to avoid extra
assignments before checking if we need to process the
actual resource.
Signed-off-by: Michael Scott <mike@foundries.io>
When reading multiple instances, the base name value should not
include an object instance id. The object instance id is added
to the individual resource name values.
Accomplish this by saving the original path level and adjusting
the (base) name where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
The put_begin / put_end calls are to be used at the very beginning
and end of processing a READ op. Let's correct that logic.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that formatters use their own private data to hold state,
let's remove the old member variables from lwm2m_output_context
which are now unused.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters have various private state variables which are
currently located in the output context structure. Let's add
a place where data formatters can store a pointer to their
private data so that as we add more formatters the output
context doesn't get cluttered up.
Signed-off-by: Michael Scott <mike@foundries.io>
The plain-text format only supports READ op for a specific resource.
In all other cases return NOT_ALLOWED.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters are becoming too complex for a simple do_read_op()
function to handle all in one place. Also, more data formatters are
going to be added for LwM2M v1.1 support in the future.
In order for data formatters to perform internal setup or deny
invalid requests (specific to the formatter's logic), let's
establish do_read_op_* functions in each formatter.
Once the internal processing is done, they can call back into the
more generic lwm2m_perform_read_op function.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's correct the starting logic in do_read_op() to not assume
a default value of 0 will be present for the first object, when
reading multiple objects.
Signed-off-by: Michael Scott <mike@foundries.io>
The object instance list isn't sorted by object instance id. Let's
simplify this and fix the logic in lwm2m_next_engine_obj_inst() to make
sure that we always get the NEXT object instance by value of
obj_inst_id, not just the next object instance in the list.
NOTE: This change removes the "last" object instance pointer from the
parameters of lwm2m_next_engine_obj_inst(). Some of the logic to return
a NULL value for the end of the list has to be moved back into
do_read_op().
Signed-off-by: Michael Scott <mike@foundries.io>
Remove over-complicated match_type logic in do_read_op(). Replace
MATCH_* checks with actual path->level values.
Signed-off-by: Michael Scott <mike@foundries.io>
The ciaddr can be null in requesting state so do not try to print
it in that case.
Fixes#9575
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is similar to change which was done in 21f31e90ec, unfortunately
this case was missed.
Fixes: #9032
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The peers were not informed about DTLS connection close because
we removed DTLS context. The fix is to notify peers before we
remove the DTLS connection.
Fixes#8605
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
NET_CONN_CB() functional macro hides the parameters a function takes
and its return type. In #8723, it's proposed to remove that macro
altogether. Until that proposal is reviewed, at least provide real
protype in code comments to help people who read/analyze the code.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If a malformed packet with multiple HBHO is received by the Zephyr IP
stack it replies with ICMPv6 type 4 code 1: "Parameter problem
unrecognized Next Header type encountered". This ICMPv6 message has
wrong IPv6 payload length and ICMPv6 checksum.
RFC 8200 in chapter 4.1 states:
Each extension header should occur at most once, except for the
Destination Options header, which should occur at most twice (once
before a Routing header and once before the upper-layer header).
There are two possible solutions to the problem at hand:
1) Respond with ICMPv6 Parameter problem, in this case IPv6 length and
ICMPv6 checksum need to be fixed
2) Drop the malformed packet
This patch implements the easy solution - 2. Basically it changes the
code to drop the malformed packet instead of sending ICMPv6 type 4
code 1.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When processing an observe request we fail to check whether a
resource has the read permission set. Let's check and if it
doesn't return -EPERM.
NOTE: Also do diligence and return -ENOENT when an object field
cannot be found while looking for the permission.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/8286
Signed-off-by: Michael Scott <mike@foundries.io>
Due to a change in the company name, the LwM2M copyrights need
to be changed from "Open Source Foundries Limited" ->
"Foundries.io".
Signed-off-by: Michael Scott <mike@foundries.io>
These were at most set, but never used. They appear to be artifacts
of importing code from the FNET stack.
Addresses: #9570
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In TCP protocol, any packet is subject to retransmission if not
ACKed in expected time. Thus, any packet, including FIN (and SYN
for that matter) should be added to the retransmission queue.
In our case, despite its name, queue_fin() function didn't add
FIN packet to rexmit queue, so do that. Then, in
net_tcp_ack_received() which handles ACKs, make sure that we can
handle FIN packets: calculate its sequence number properly, don't
make adhoc adjustments to retransmission logic (it's handled
centrally in restart_timer() already), etc.
Fixes: #8188
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we run out of buffers and cannot create the TCP segment,
then handle it properly and do not access NULL pointer.
Coverity-CID: 187822
Fixes#9639
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is timeout when adding UDP data, then check this
condition and bail out by returning NULL as the packet is now
malformed.
Coverity-CID: 187825
Fixes#9636
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The previous code "optimized" and called both net_context_accept()
and net_context_recv() blindly to reset the corresponding callbacks.
But this leads to "wrong state" logging if debugging is enabled, so
clean that up.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Where we calculate max size, name variable (preprocessor define)
correspondingly.
2. Calling TCP/UDP an "app protocol" is original, use "next protocol"
terminology of IPv6.
3. As headers go as IP, then "next", order calculations that way too.
4. Add more comments.
Addresses: #8723
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
CONFIG_NET_OFFLOAD was defined in Kconfig of net/ip/l2/, but actually
used by the code in net/ip/.
Fixes: #8646
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Spurious TCP retries were observed using Wireshark while continuously
sending TCP packets at an interval faster than the initial RTO.
If the send list is empty and CONFIG_NET_TCP_TIME_WAIT_DELAY is used,
the retry timer will not be correctly stopped when receiving a valid
ACK. As a consequence, the timer might be running when a new packet is
queued, but the logics in net_tcp_queue_data() will not restart the
timer as it is already running. This will make the retry timer to expire
prematurely, potentially while sending packets.
The nested condition is merged into a single condition, allowing the
final else clause to be reached when a valid ACK is received.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The code was not working properly if there was multiple timers
that were triggered in different times.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The autoconfigured IPv6 addresses that are related to removed
prefix, need also removed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the IPv6 address expires, then it is marked as deprecated.
If a renewal is received in router advertisement, then the address
can be re-used again and is marked as preferred.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No functionality changes. Just moved IPv6 fragment and related functions
to ipv6_fragment.c for better readability
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes. Just moved IPv6 MLD and related functions
to ipv6_mld.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes. Just moved IPv6 neighbor and related functions
to ipv6_nbr.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send ND reachable message and waiting for the reply in order to get to
the neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 ND reachable request timer by having one central k_delayed_work
and a timestamp in every IPv6 neighbor data entry properly handled at
every timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send NS message and waiting for the NS reply in order to get to the
neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 send NS request timer by having one central k_delayed_work and
a timestamp in every IPv6 neighbor data entry properly handled at every
timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit contains several fixes for DTLS implementation, proposed in
a post-merge review of #9338.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The intention is to clean up the usage of net_sprint_ipv*_addr()
functions where 2 or 3 invocations are needed.
Thus, the default number of buffers is 3.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Thise uses the new net_pkt_append_memset() function to generate the
required zero filling instead of calling net_pkt_append_u8() in loops.
Fixes#9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Some locations like DHCPv4 client create a prefilled packet by appending
new fragments in a loop with one byte each via net_pkt_append_u8() which
is wasteful and noisy. This patch adds the new functions
net_pkt_append_memset() which creates fragments as needed in the desired
size and initialises it to the specified value.
This change also adds a unittest for the new function.
Prerequisite for #9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Echo server crashes upon reception of fragmented packets. This
occurs when fragmentation is enabled with the default prj.conf
of echo server. The cause is that by default with logs disabled
net_sprint_ipv6_addr returns NULL.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There was one extra byte sent in last chunk which caused
this error to be printed by curl
* Illegal or missing hexadecimal sequence in chunked-encoding
* stopped the pause stream!
* Closing connection 0
curl: (56) Illegal or missing hexadecimal sequence in chunked-encoding
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 'Network type' choice always defaulted to NET_RPL_L2_ANY, because
choices prefer the first default with a satisfied condition (this was
true even when Zephyr still had the prefer-later-defaults patch).
Swap the defaults so that NET_RPL_L2_IEEE802154 becomes the default if
NET_L2_IEEE802154 is enabled, as intended.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit adds checks to L2 and network support libraries.
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit only adds checks to core IP stack in subsys/net/ip
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There have a funtion mqtt_rx_unsuback defined but not used.
So add it into mqtt_parser and fix the missing case.
Fixes#8431
Signed-off-by: Xuan Ze <119524428@qq.com>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Originally EFAULT was used to indicate NULL pointer error in TLS option
set/get functions. EINVAL was suggested to be more apropriate error code
for this case, hence replace it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce non-blocking DTLS handshake, used during recv function call.
This prevents from blocking while waiting for initial handshake packet
on non-blocking sockets during receive.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make TLS poll function verify if decrypted data is available after
socket has notified activity with POLLIN flag. This prevents from giving
false notifications in case data was received on socket but was consumed
by mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Specify timeout value for mbedtls_ssl_read function for DTLS servers.
Adding this can prevent TLS context lockup in case blocking recv is used
and peer has shut down DTLS connection without closing it gracefully.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DTLS recv/recvfrom function.
For DTLS client, recv function requires to have an already established
DTLS connection.
For DTLS servers, this function will try to establish DTLS connection
before receiving data. In case that DTLS handshake fails, recv function
will silently retry.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DTLS send/sendto function.
For DTLS clients, send function will try to establish DTLS connection
before sending data. If DTLS handshake fails, it will return an error.
For DTLS servers, send function requires to have DTLS connection already
established.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
DTLS handshake can return MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED, which
indicate that TLS session context should be reset.
Also, store information whether TLS connection has beed established.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add binary IO functions for DTLS connections.
dtls_rx function is more complex than it's TLS counterpart due to fact,
that DTLS does not allow blocking operation for this function. A simple
timeout mechanism was implmented basing on the zsock_poll function.
This function also verifies peer address. As currently only a single
DTLS connection is supported on a socket, if a DTLS connection is
established, and we receive datagram from different peer, it is silently
dropped.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Functions for checking flags set on sockets are needed by TLS sockets as
well, therefore extract them to a separate header file to avoid code
duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only socket option to set role for DTLS connection. This
option is irrelevant for TLS connections.
This options accepts and integer with a TLS role, compatible with
mbedTLS values:
0 - client,
1 - server.
By default, DTLS will assume client role.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After it sends SYN_ACK, there is a case that the client sends the packet
with both ACK and RST bits are set, and this packet needs to be handled
if the packet is valid.
CLIENT SERVER
------ ------
|--------- SYN -------->|
|<------ SYN_ACK -------|
|------- ACK_RST ------>|
|--------- SYN -------->|
|<-------- ??? ---------|
This patch checks the RST bits even if other flags are set and process
the packet.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
IPv6 cleanup patch introduced a regression. Misunderstood the logic.
Do not drop the packet if packet does not have ND options, just skip.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of reading or writing different icmpv4 header's individual
variables, better to read or write whole struct at a time. This
minimizes the calls to net_frag_read() or net_frag_write().
changes also removed slow and fast paths. Changes should optimize
the total flow.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This net_buf leak happends when we are low on available net_buf
count. During TCP segment preparation we do allocate IP header
successfully, but we fail to allocate TCP header. In such case
pkt->frags is not NULL anymore (it contains IP header), but we
override it during TCP header allocation error path. This results
in net_buf containing IP header to never be deallocated, because
it does not belong to any net_pkt anymore.
Use net_pkt_frag_add() function to add tail for future net_pkt
deallocation, instead of assigning tail to pkt->frags pointer.
Fixes: c6407659f3 ("net: tcp: Add the frag back to caller allocated
net_pkt")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Instead of reading or writing different icmpv6 header's individual
variables, better to read or write whole struct at a time. This
minimizes the calls to net_frag_read() or net_frag_write().
changes also removed slow and fast paths. Changes should optimize
the total flow.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the driver has created start() and stop() functions, then those
are called when ethernet L2 is enabled or disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv6 fragmentation splits the packet into two parts, one is header
and another is payload. Every time header is cloned and part of
payload is appended. At the end original header packet is not freed.
Causes memory leak.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current implementation only considers IP header length while setting
appdata value on a cloned packet. It will give bogus value if original
packet contains extension headers and if extension headers are large
(i.e. more than one fragment). Only consider appdata length from the
original packet.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The ethernet sending routine sent a corrupted ARP packet instead
of the actual IPv4 packet.
Fixes#9348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to inline the net_if_ipv6_addr_lookup_by_iface() function
as it is used multiple times in ipv6.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function which returns proper network interface to send either
IPv4 or IPv6 network packet to corresponding destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that will return the network interface that would
be used when sending a IPv6 network packet to specific IPv6 destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For example for Bluetooth IPSP, it is not needed to join solicited
node multicast group address.
From https://tools.ietf.org/html/rfc7668#section-3.2.2 :
"""
There is no need for 6LN to join the solicited-node multicast address,
since 6LBR will know device addresses and hence link-local addresses
of all connected 6LNs.
"""
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LLDP protocol defines 2 separate agents, the Transmitters and
the Receivers. For the context of Zephyr, we are only interested in
the Tx agent, thus we drop any LLDP frames received by Zephyr.
LLDP frames are basically composed by an ethernet header followed by
the LLDP Protocol Data Unit (LLDPDU). The LLDPDU is composed by several
TLVs, some of them being mandatory and some optional.
Our approach here is having TLVs fully configured from Kconfig, thus
having the entire LLDPDU constructed on build time.
The commit adds NET_ETH_PTYPE_LLDP definition and related handling.
If CONFIG_NET_LLDP is enabled then ethernet_context has a pointer to
the struct net_lldpdu that belongs to that ethernet interface. Also
when CONFIG_NET_LLDP is enabled, the LLDP state machine will start to
send packets when network interface is coming up.
Currently the LLDP state machine is just a k_delayed_work() sending the
LLDPDU at a given period (defined by CONFIG_NET_LLDP_TX_INTERVAL).
Fixes#3233
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LwM2M engine will cleanup the net_app_ctx if there are
errors during initialization. The clean up calls here in
RD client are duplicated.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that string to integer conversions are checked properly
so that we are not trying to use the return value from strtol()
if the string is not a number.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change moves the logic for linearize and append_bytes from
the net_pkt sources into the net_buf sources where it can be
made available to layers which to not depend on net_pkt. It also,
adds a new net_buf_skip() function which can be used to iterated
through a list of net_buf (freeing the buffers as it goes).
For the append_bytes function to be generic in nature, a net_buf
allocator callback was created. Callers of append_bytes pass in
the callback which determines where the resulting net_buf is
allocated from.
Also, the dst buffer in linearize is now cleared prior to copy
(this was an addition from the code moved from net_pkt).
In order to preserve existing callers, the original functions are
left in the net_pkt layer, but now merely act as wrappers.
Signed-off-by: Michael Scott <mike@foundries.io>
This are all the parameters defined by the standard (12.21.1).
Additionally the parameters that are read-only are validated in the
ethernet_set_config callback.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commits adds new priority to traffic class mappings and allows
users to choose which mapping to use through menuconfig.
The new mappings are recommended in 802.1 (chapter 34.5) for
time-sensitive applications supporting the credit-based sharper
algorithm.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The dummy L2 does not setup the link layer address. Do not check the
source and destination link layer addresses when routing packets
otherwise packet routing will not work when using a dummy L2.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unspecified address 0.0.0.0 was used as a requested IPv4 address
because the ARP message was generated second time. So for IPv4
autoconf ARP message, generate the message only once.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allows ethernet drivers to provide vendor specific statistics
and details in the form of key-value pairs with the name of
the staticstic and its value.
The new string tables will be behind a new config:
NET_STATISTICS_ETHERNET_VENDOR
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
If a disconnection callback was registered, it is not called
as the check done in net_app is reversed. The disconnection callback
is not called if there are any inactive contexts.
The check should be on any active context.
Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Print information about supported hardware capabilities for
ethernet interfaces when executing "net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ethernet mgmt is enabled and the driver supports priority queues,
show info about them including the Qav status
(enabled/disabled/unsupported).
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add calls responsible for getting and setting on/off status of Qav on
capable priority queues.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread L2 could've called multicast address registration multiple
times for specific address, which resulted in having multiple entries
containing the same multicast IPv6 address in Zephyr.
Checking if address was already registered prevents that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
No need to keep technologies in main L2 directory so for consistency
create a directory for each of them and place each L2 component to
relevant L2 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes use of the get_config callback added to the Ethernet API.
For now the only parameter to get is the number of available priority
queues.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This reduces memory overhead on net_if_dhcpv4: 16 bytes vs 120 bytes
before. This might proove to be beneficial when there are many network
interface.
dhcpv4 ROM consumption is now 2132 bytes vs 4224 (many switches removed)
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Empty line before if (unless test uses previous line assignment) and
after } (unless it's another } ...)
Indentation fixed as well.
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Pre-assigned are always coming first.
- Always declare at the beginning of a code block
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add write only TLS secure option to set peer verification level for
TLS connection.
This option accepts an integer with a peer verification
level, compatible with mbedtls values (0 - none, 1 - optional, 2 -
required.
By default, socket mimics mebdTLS behavior - (none for server, required
for client).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option to read a ciphersuite chosen during TLS
handshake. Might be useful during development.
This is a read-only option that returns an integer containing an
IANA assigned ciphersuite identifier of chosen ciphersuite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option that enables to narrow list of ciphersuites
available for TLS connection.
This option accepts an array of integers with IANA assigned ciphersuite
identifiers and returns such.
By default, every statically configured ciphersuite is available for a
socket and getsockopt returns an array of these.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only TLS secure socket option to set hostname.
This option accepts a string containing the hostname. May be NULL, to
disable hostname verification.
By default, an empty string is set as a hostname for TLS clients,
to enforce hostname verification in mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option to select TLS credentials to use.
This option accepts and returns an array of sec_tag_t that indicate
which TLS credentials should be used with specific socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS credential management subsystem that enables to register TLS
credentials in the system. Once specific credentials are registered in
the system, they will be available for TLS secure sockets to use.
To use a TLS credential with a socket, the following steps have to be
taken:
1. TLS credential has to be registered in a system-wide pool, using the
API provided in "net/tls_credentials.h" header file.
2. TLS credential (and other TLS parameters) should be set on a socket
using setsockopt().
Note, that there is no need to repeat step 1 for different sockets using
the same credentials. Once TLS credential is registered in the system,
it can be used with mulitple sockets, as long as it's not deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When an echo request is sent to an unknown neighbor, a Neighbor
Solicitation request is sent, however if the source address
cannot be determined the NS request is dropped but the pending
packet is not freed.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Move struct members around in networking code so that we avoid
unnecessary holes inside structs. No functionality changes by
this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reduces the logic as well as the ipv4 header checksum needs to be
computed either way.
Fixes#8720
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use modular arithmetic in statistics prints so that wraparounds are
automatically handled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to set the network interface into promiscuous mode
and then receive all the network packets that are received by
that interface.
Fixes#7595
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to set the network interface to promiscuous mode
and query the promisc mode status.
Note that currently this is only supported for ethernet bearer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_DNS_RESOLVER is the master switch for DNS resolution support,
for both native and socket APIs. Avoid confusing link errors by
compiling out both dns_resolve_name() and getaddrinfo() if that
option is not enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Current implementation does not handle large extension headers
(e.g HBHO). Which resulted network stack crashes or due to
misinterpretation of lengths network packets are dropped. Also
caused issues while preparing IPv6 packet (e.g. large HBHO header
with IPv6 fragmentation support).
Issues fixed and provided more unit tests.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We might access NULL pointer if strchr() return value is not
checked properly.
Coverity-CID: 187073
Fixes#8993
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that it is clear that we are suppose to fall through
a case statement.
Coverity-CID: 187078
Fixes#8989
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not overflow when creating UScaledNS
value for interval.
Coverity-CID: 187079
Fixes#8988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The advantage to this approach allows drivers for
devices that already keep statistics data on hardware
registers to use those instead, rather than try to
replicate it the same counters again within the driver
itself.
The eth_native_posix.c driver though do not benefit
from this, is modified to use the new callback system.
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
If Neighbor Advertisement cannot be sent, then print info about it.
Earlier we printed info when NA succeeded.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
During transfer of object data via OMA TLV format, we can
encounter resources which are optional or not handled in base
LwM2M engine. When these resources cannot be handled let's
read past them and continue on.
Signed-off-by: Michael Scott <mike@foundries.io>
Don't use hard-coded value of 4 for passing the # of options to
coap_find_options() in handle_request(). This can easily get
out of sync.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M engine now supports optional resources that may need to be
setup or torn down in user-based code during object instance
creation / deletion.
Let's provide callbacks that can be used for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename lwm2m_engine_exec_cb_t to lwm2m_engine_user_cb_t so that
future user-code callbacks can make use of the same definition.
Signed-off-by: Michael Scott <mike@foundries.io>
Initial implementation of poll() was more of a proof of concept, so
was coded with a single-thread application in mind. As we move to
sockets as the main networking API, make it possible to use poll()
from different threads.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A condition can be but on a prompt to make a symbol conditionally
user-assignable (visible).
Kconfig note:
'default's don't care whether the symbol is visible (has a prompt with a
satisfied condition) or not. 'if'/'depends on' just puts the same
condition on all the properties, disabling both the defaults and the
prompt at the same time. That might make it look like they're connected.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Implement socket poll function for TLS socket. In addition to regular
poll checks, we have to check if there is some decrypted data pending on
mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add entropy source for mbedTLS. If no entropy driver is available, use
non-secure, software entropy source.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add tls_context structure that stored data required by TLS socket
implementation. This structure is allocated from global pool during
socket creation and freed during socket closure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add switch to a socket layer that will enable switching socket API to
TLS secure sockets. At this point there is no secure sockets
implementation, so secure socket calls redirect to regular socket calls.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Having 24 parameters in a debug print is a bit extreme especially
as it is causing warning from new logger. Split the debug print
to three pieces each having 8 parameters which is more reasonable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code did not check if the icmpv4 header struct is already
pointing to net_buf or not. This meant that the code did not
set the ICMPv4 options and types correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_addr_pton() did not check the number of ":" characters properly.
For example with following net-shell input
net ping fe80::210:2030:9b:d48efe80::210:2030:9b:d48e
the kernel panics.
Signed-off-by: Walter Xie <41377148@qq.com>
This commit adds a possibility to use Qav (credit-based shaping) in the
ethernet drivers.
There are two parameters exposed through the mgmt api: deltaBandwidth
and idleSlope.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is no point in sending Announces with GM chosen in BMCA if it is
expired and InfoIS is changed to MINE.
Check where does the GM info come from and fill the Announce packet
accordingly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Previously the newer one got dropped.
The older ones will be dropped in a way that the follow up messages for
them will not be sent.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The gptp port number starts from 1, so the check was incorrect.
Use the proper define values before printing stats.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The shell did not check if the gptp port (command argument) is numeric.
Add that check before executing the port info functions.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
A small helper function will return information whether
a given network interface has VLAN enabled or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not clear pending PDELAY_REQ pointer when sending a new one.
Unref the state->tx_pdelay_req_ptr first and only then set the
new pointer value. This will prevent buffer leak if we miss the
response from the peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the calculated ratio values are used just once.
Without this, if the ratio is even insignificantly larger than 1, the
actual clock quickly drifts to really large numbers. This causes the
sync procedure to restart too often.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem with the previous approach was that the response timestamp
callback which calls net_pkt_unref could be skipped if the callback was
already registered for another packet. The net_pkt_ref function was
always called which led to memory leaks.
This commit simply disallows handling multiple pdelay requests at once.
If the timestamp callback is already registered, the received request
will not be handled.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The issue was that the length field of the tlv extension in the sync
follow up packets was wrong. It is supposed to skip the length of the
header of that extension. The easiest fix was separating the header and
the actual contents into separate structs and that's what this commit
does.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
As the PTP clock should return the correct time, use that
instead of zephyr uptime for time as that has only ms accuracy.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use priority 3 (critial app) for outgoing event messages (Sync,
Pdelay_Req and Pdelay_Resp). Use priority 6 (Internetwork Control)
for all other outgoing packets.
See IEEE 802.1Q chapter 8.4.4 for more details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Split out definition of net_app_init() and its parameter flags from
net_app.h header to new net_config.h header. As we do this, rename
the function to net_config_init() and flags to NET_CONFIG_NEED_*.
This is a second step in splitting out network configuration API
out of net_app API, started in the c60df1311 commit.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There is no link address for Dummy network technology, so check
that before trying to print link address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows zephyr to listen LLMNR DNS queries sent by Windows
and respond to them. See RFC 4795 for details.
The feature requires that hostname is set properly to the
zephyr device and LLMNR is configured properly.
Typically following config options are enough for this support:
CONFIG_NET_HOSTNAME_ENABLE=y
CONFIG_NET_HOSTNAME="zephyr-device"
CONFIG_DNS_RESOLVER=y
CONFIG_LLMNR_RESPONDER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements LLMNR client from RFC 4795. This means that caller
is able to resolve DNS resource records using multicast DNS.
The LLMNR is used in Windows networks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An ARP entry, if not free, will be either in pending list or in the ARP
table. What differentiate both is the type of data they hold: either a
pending packet or an actual ethernet address.
It is then possible to unite these 2 attributes to save 4 bytes
per-entry.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Until now, each ARP entry had a k_delayed_work to be used as a timer
when the ARP entry is a pending one, waiting for the ARP request to
succeed in order to get to the ARP table.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
ARP request timer by having one central k_delayed_work and a timestamp
in every ARP entry properly handled at every timeout (1+ entry might
have reached the timeout then).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of looping over the entries array, which will keep the same
order, let's use slist: one for free entries, one for pending ones and
finally one as the actual ARP table.
This permits some optimizations in how to look up and making small
heuristics by changing entries order when it seems relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This "net gptp [port id]" command will give some extra info about
gPTP status if gPTP is enabled in config file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application does not do much, it just registers to a callback
in order to get information about gPTP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The subsys/net/ directory is more logical place for L2 code instead
of ip/ directory. No functionality changes by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Defines a PTP clock driver that can be implemented in those network
interface drivers that provide gPTP support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
This is actually the same as #7229 in which we missed this side of
conversion (only PCP to packet priority was implemented).
The conversion is actually the same both ways, thus it uses the map
added earlier.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Allow creation of TX timestamp thread which will collect TX timestamp
information from device drivers. If the callback is registered, then
it will pass that timestamp information to the relevant party for
further processing. This support will be used by gPTP code in
subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
Due to the fact that cmake doesn't allow to build empty "library"
(which would be the case when neither CONFIG_NET_APP_SERVER nor
CONFIG_NET_APP_CLIENT is defined).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_app library consisted of 2 disjoint parts: a) library to
setup/configure networking on the application startup; b) library
to setup client and server connections.
As the configuration library is universally useful and is a generic
Zephyr networking component, split it out to a seperate top-level
networking library under net/lib/config/.
Fixes: #7658
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This patch changes the backoff factor to be random between zero and
2^be-1, as defined by the standard.
The previous implementation generated either a power-of-two number or
zero for bo_n, because it only overlaps a single bit with the random
number. The overlap is very rare, as in random, and results in the
backoff time being zero most of the time.
Signed-off-by: Franco Saworski <franco.saworski@blik.io>
When the priority of the LwM2M engine was lowered, it causes an
occasional registration update to fall outside of the registration
lifetime. This shows up as the following error:
Failed with code 4.4. Retrying registration
Let's try and retry a bit earlier to account for the priority
change.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
'default false' should have been 'default n', though they happen to have
the same effect here, due to undefined Kconfig symbols ('false')
evaluating to 'n' in a boolean sense.
Kconfig bool symbols implicitly default to 'n', so remove the default
rather than fixing it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Invalid configurations should be detected during configuration instead
of during compilation whenever possible.
This patch replaces a BUILD_ASSERT on CONFIG_NET_BUF_USER_DATA_SIZE
with what is intended to be an equivalent Kconfig restriction.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Currently, we add TCP options only to SYN+ACK reply to peer's SYN
(i.e. passive open). For consistency, add them also when we send
SYN ourselves (active open). In both cases, we add just MSS option
currently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Ethernet header is always filled in the first fragment of a packet,
so passing it as a separate function paramter is supefluous.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There's an apparent typo in testing net_buf headroom. Also, after
adding VLAN header support, its size should be used too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There was no proper support to timeout an ARP requests which meant
that trying to resolve non-existent IP address left network packet
pending on ARP cache.
Fixes#8019
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For debugging purposes it is useful to know which interface
the dropped packet was received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 'source' of subsys/net/ip/Kconfig in subsys/net/Kconfig is already
within an 'if NETWORKING' block, so the NETWORKING dependency in
subsys/net/ip/Kconfig is redundant.
Remove the redundant dependency.
This gets rid of a bunch of 'NETWORKING && NETWORKING' dependencies in
the auto-generated Kconfig docs.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Because per-interface statistics rely on interface pointer stored in a
net_pkt, it should not be unreferenced before stats are updated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Functions for per-interface statistics collection used a pointer to a
packet that could've been deallocated in the net_conn callback function.
In result, application could crash when interface related to the packet
was referenced. To fix that, packet interface is stored earlier, so it
can be used instead for statistics collection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The IP stack drops any TCP segment which doesn't fit into our
receive window. However, we still must accept Zero Window Probe
segments, which are segments, usually with data length of 1, which
a peer sends to us after we stayed with zero window for some time.
In this case, we need to repeat an ACK with the old ack number.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Catch interface up/down events so that we can renew the
address if interface goes down and is then restored.
Fixes#7553
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_eth_carrier_on() and net_eth_carrier_off() functions that
can be called by ethernet device driver when it detects that carrier
is lost or found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It's rather confusing to not see current TCP state in any way (it
makes distinguishing different TCP contexts very hard). And nobody
can know/remember that it's printed with CONFIG_NET_DEBUG_TCP
defined. So, just make it be printed always (initially I thought
about printing just numeric value if CONFIG_NET_DEBUG_TCP isn't
defined, but why, if we can print symbolic name easily).
Also, add a hint that defining CONFIG_NET_DEBUG_TCP will still
print even more info (like unacked pkt list) - similarly to
similar helpful hints we have in other parts of net shell.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's set it by default when allocating net_pkt. A macro will avoid
ifdefs as well
CONFIG_NET_TX_DEFAULT_PRIORITY is always defined.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When disabling an ethernet interface, only its cache entries need to be
cleared up and not the whole cache. This is meaninful in case there is
2+ ethernet interface instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only the first one requires it. Actually drivers know that already and
handle the frags list correctly.
In case ethernet has to run along with 15.4 on the same SoC, this will
optimize things quite a bit knowing that biggest ethernet frame will be
forcefully split in as many 128 bytes frags as necessary.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A typo in update_attrs() was setting every observer to a PMIN of 0.
This meant we could send observer data as often as the process was
called. This is out of spec as the default minimum is 10 seconds.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The hop limit value in net_pkt was not updated according to
received IPv6 header.
Fixes#8182
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LwM2M engine thread is used for various periodic triggers.
None of these are in a critical path that requires super sensitive
timing and the current K_PRIO_COOP(7) setting was causing the
Bluetooth RX thread to have to wait too long for certain actions
to complete.
Let's lower the priority to -1 (effectively) to eliminate these
conflicts.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
IPv4 header's checksum was set when 'setup_ipv4_header', but in that
times IPv4 header's source ip and dest ip address haven't setted. So
it may be set an incorrect checksum.
Fixes: #7989
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
We init the net_tc tx/rx work queues during net_init() with a
call to init_rx_queues(). The L2/L3 and networking drivers have been
setup at this point. If we yield the current thread, we risk
a call to net_recv_data() which calls net_queue_rx() which calls
net_tc_submit_to_rx_queue() on an RX work queue which hasn't been
setup yet.
This manifests as a boot hang under seemingly random circumstances.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Security layer was tested only against CC2520, which does not mandate to
begin the session with a valid key. However, the crypto API tells it
must do so. And indeed, starting a session on mtls shim crypto device
will fail due to missing key. Thus moving the relevant code where it
should.
Reported-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This one converts "raw" timeout value to use K_MSEC() macro
in order to make clear how long the timeout is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use of K_SECONDS() macro is more intuitive so use that instead of
plain MSEC_PER_SEC define.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert couple of MSEC() calls to K_MSEC() as the timeouts
when using MSEC() are just too long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
During normal use, a CoAP packet can be resent due to network congestion
and other causes. During block transfer the LwM2M client checks to make
sure the block received is the one we expect and if not generates a
"duplicate" warning. When this happened, we were releasing the reply
handler and when the correct block was received the client would
generate a "No handler" error.
To avoid releasing the reply handler too early, let's set the coap_reply
"user_data" field to an error condition (1). Then, once the reply
processing is complete we can check the user_data field to be sure that
it's ok to release the reply handler.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This patch fixes possible null pointer dereference in
net_stats_update_rpl_resets(...).
net_rpl_set_root_with_version(...) does not initialize instance->iface
and calls net_rpl_reset_dio_timer(...), which then calls
net_stats_update_rpl_resets(instance->iface).
fixes: #7862
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The code was using MSEC() macro in few places instead of more
proper K_MSEC(). The MSEC() takes seconds as a parameter and
K_MSEC() takes milliseconds.
Fixes#7657
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sin6_scope_id is not set anywhere and not used. Probably left over
from old ZOAP library. Just address, port and family type are enough
to find registered CoAP observer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The next error check is much more suitable to handle the error due to
the error message which lets the user know that something went wrong.
Fixes#7661.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
In switch statement break statement was missing causing IPv4 part to
execute even if the packet is IPv6. Also logical negation is wrong in
this context.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
NET_ASSERT is useless here, as we already know that an error happened.
Use NET_ERR in order to print a more informative message.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
When calling net_frag_read(), frag == NULL is an error only if pos is
not zero. It is thus incorrect to throw an error only if !frag, as
pos must also be checked to be not zero.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Current implementation hardcoded channel in received frame structure.
With this change channel can be retrieved from a OpenThread platform,
and put in the frame. In result procedures like Discovery can be
executed correctly. Change was tested with OpenThread Border Router.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit contains bugfix for Joiner eui-64 handling and setting radio
in correct mode after calling thread stop.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If a packet with source IP address and port same as the address of echo
server is received, it causes echo server to recursively send the packet
to itself, resulting in a crash and memory depletion. This commit fixes
the crash by dropping the packet.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When designing the registration client for LwM2M, I understood
that the LwM2M Technical Specification allows for a multi-server
connection setup where the client makes several connections
to various LwM2M servers and allows each of them to manage
various aspects of the LwM2M client based on Access Controls.
However, the way I implemented it was not well thought out and
as we look forward to adding Bootstrap support, it needs a
do over.
Let's remove all of the code dedicated to handling multiple LwM2M
client connections. This will simplify and reduce the code size
of the registration client considerably.
Later, once Bootstrap support has been added, we can implement
multi-server connections in a cleaner manner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This allows a user to customize the port used for downloading
firmware via the pull method of the LwM2M client. It's default
value of 0 will select a random port during initialization.
NOTE: If set, this value should not be the same port as the
LWM2M_LOCAL_PORT setting.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Due to a bug where LWM2M_LOCAL_PORT was not being honored, all
outgoing traffic from the LwM2M client was coming from a random
port determined during initialization.
Now that this bug bas been fixed, let's default the client to the
behavior that most users are expecting, and let new users customize
the outgoing port if needed (which should be rarely).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, CONFIG_LWM2M_LOCAL_PORT is never used when setting up
the LwM2M client. Let's set the port of the local address using
CONFIG_LWM2M_LOCAL_PORT, so that the client can bind to it.
NOTE: A setting of 0 will use a random port.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, the client_addr parameter is only used to check the
sa_family at various points during the init process. Both the
IP address and the port are ignored. Let's set the local client's
port based on the port value of the passed in client_addr if one
is supplied.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The port parameter passed to _net_app_set_local_addr() is converted
from host byte-order to network byte-order. Here we are passing
a port value which has already been translated to network byte-order.
Let's translate the local port to host byte-order when passing it
to _net_app_set_local_addr() to fix this issue.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
L2 could take advantage of such hardware capability, when supported by
the device. This is also required for OpenThread.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previously, there was a boolean CONFIG_NET_TCP_TIME_WAIT setting
("master switch") and numeric CONFIG_NET_TCP_2MSL_TIME setting,
both named not ideally (there were both NET_TCP_TIME_WAIT and
CONFIG_NET_TCP_TIME_WAIT symbols in the source, with very different
meaning; "2MSL_TIME" was also a roundabout way to refer to
TIME_WAIT state time). In addition to that, some code was defining
adhoc, hardcoded duplicates for these settings.
CONFIG_NET_TCP_2MSL_TIME was also measured in seconds, giving
poor precision control for this resource-tying setting.
Instead, replace them all with the single
CONFIG_NET_TCP_TIME_WAIT_DELAY setting, measured in milliseconds.
The value of 0 means that TIME_WAIT state is skipped.
Fixes: #7459
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We only clear 3 of the 6 member variables of the coap_reply structure
in coap_reply_clear().
Let's make sure to reset all of them.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The base CoAP retry setting is quite fast for network technologies
such as LTE-M and LoRa. Let's add an option to delay retries
a bit longer depending on the need.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using IPSO Smart Object Guideline: "Smart Objects Starter Pack 1.0"
dated May 27, 2017, let's mark the OPTIONAL resources for an
IPSO Temperature object (Section 10. "IPSO Object: Temperature").
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using IPSO Smart Object Guideline: "Smart Objects Starter Pack 1.0"
dated May 27, 2017, let's mark the OPTIONAL resources for an
IPSO Light Control object (Section 16. "IPSO Object: Light Control")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Firmware Update object (Section E.6 "LwM2M Object: Firmware
Update")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Device object (Section E.4 "LwM2M Object: Device")
As a result, the Device object no longer configures the default
buffers for data storage of several optional resources.
The LwM2M client sample is also changed to to setup these read-only
buffers instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Server object (Section E.1 "LwM2M Object: Server")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Security object (Section E.1 "LwM2M Object: Security")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This patch introduces several changes to support OPTIONAL resources.
The primary indicator for this behavior is to assign FLAG_OPTIONAL
to the object field's permission flags.
These resources are not setup by the LwM2M object code. They are
left up to the user-based code for initialization via the following
functions:
lwm2m_engine_set_res_data()
lwm2m_engine_get_res_data()
When assigning const-based data as a data buffer, user-based code can
also specify the following data flag: LWM2M_RES_DATA_FLAG_RO
The FLAG_OPTIONAL flag also affects the LwM2M engine in the following
ways:
- CREATE operations won't generate an error if optional resources are
not included.
- Object instance READ operations won't complain about missing
optional resources.
- In the future, BOOTSTRAP operations can have different handling
based on optional resources.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In the future, we will have optional resources that may or may
not be assigned a buffer for data storage. When these resources
are queried we need to be able to return an error code if the
buffer isn't set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of selecting the first IPv4 address from the network
interface, use destination address to select the proper local IPv4
address.
Fixes#7500
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix a build warning when compiling a net_app sample with
CONFIG_NET_APP_DTLS enabled by changing the print formatter from %zu
to %d. It references the var hdr_len which is defined as an int:
In file included from include/net/net_core.h:78:0,
from subsys/net/lib/app/net_app.c:27:
subsys/net/lib/app/net_app.c: In function ‘_net_app_ssl_mainloop’:
include/logging/sys_log.h:96:20: warning: format ‘%zu’ expects
...
subsys/net/lib/app/net_app.c:2132:6: note: in expansion of macro
‘NET_ERR’
NET_ERR("could not skip %zu bytes",
^~~~~~~
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Changed define for SETTINGS_CONFIG_PAGE_SIZE from a hard coded value
to reference build system generated FLASH_ERASE_BLOCK_SIZE. This value
comes from 'erase-block-size' found in the dtsi file of devices.
- Modified nrf52840.dtsi to include definition for 'erase-block-size'
Fixes#7107
Signed-off-by: David Leach <david.leach@nxp.com>
This removes some tricky math to calculate lengths and offsets,
ensuring that, when appending the WebSocket UUID to the handshake
key, the key_accept buffer won't overflow.
Coverity-ID: 183057
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Rewrite prepare_reply() to reduce unnecessary string copies and calls
to net_pkt_append_all(). Also reduces some of the tricky string length
calculations.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In an effort to reduce the footprint of the LwM2M client, let's
lower the default # of observes handled by the client from 20 to
10.
This saves ~640 bytes of SRAM.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove "used" member from observe_node structure and replace by
checking the ctx for non-NULL value.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The slist attr_list doesn't scale well when added to the LwM2M object,
object instance and resource instance structures. The goal of a
robust LwM2M client is to let the user create MANY object instances
and these will have many resource instances each. The amount of SRAM
taken up by the attr_lists will only increase over time, regardless
of the actual # of write attribute structures reserved via the
LWM2M_NUM_ATTR config setting.
Instead, let's remove the slist from these structures and add a
reference pointer to the lwm2m_attr structure. We can use this
reference to create the one to many relationship between the objects,
object instances and resource instances for a much smaller amount of
code and SRAM resources.
The sacrifice for these savings will be a larger # of iterations when
looking up assigned write attributes and matching them to their
references. However, due to the # of write attributes current being
handled, the # of iterations during this process is very manageable.
Example flash and SRAM savings when building for nrf52_blenano2:
Before patch:
Memory region Used Size Region Size %age Used
FLASH: 139532 B 512 KB 26.61%
SRAM: 36576 B 64 KB 55.81%
IDT_LIST: 148 B 2 KB 7.23%
After patch:
Memory region Used Size Region Size %age Used
FLASH: 139284 B 512 KB 26.57%
SRAM: 36000 B 64 KB 54.93%
IDT_LIST: 148 B 2 KB 7.23%
Summary: This patch saves ~248 bytes of flash and ~576 bytes of SRAM
for the typical configuration of LwM2M client in Zephyr.
NOTE: these values will vary by architecture.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When any error is returned from update_attrs() in engine_add_observer()
an EINVAL is returned back to the caller. Let's return whatever error
code was generated in update_attrs() instead.
Also, add handling where previously errors were ignored.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
For code clarity, let's move notification_attrs structure to the top
of lwm2m_engine.c. While we're at it, we can re-order it's members
for memory alignment.
NOTE: This patch does not change the current flash or SRAM usage but
further additions to the notification_attrs structure could.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The path member of the object instance and resource instance structures
can easily be removed to save several bytes per instance over the entire
LwM2M subsystem. So let's remove it.
Example savings when building for nrf52_blenano:
SRAM usage before patch: 37952 B
SRAM usage after patch: 36576 B
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Let's optimize the order of the following structures to account for
memory alignment:
lwm2m_engine_obj
lwm2m_engine_res_inst
lwm2m_output_context
lwm2m_output_context
Tested building for nrf52_blenano hardware:
SRAM usage before patch: 38240 B
SRAM usage after patch: 37952 B
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
sendto() is one and only caller of send_data(), a function of handful
of lines, and yet send_data() is located a hundred lines away from
it. Such "spaghetti functions" complicate review, debugging, and
refactoring of the IP stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's highly unlikely that snprintk() will return a negative value, but
that's a possibility that will make the `pos` variable be set to a
value outside the boundaries of the statically allocated `buf` array.
Also clamp writes to ensure that the statically allocated buffer won't
be overwritten with a large token length.
Fixes#7070.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The IEEE 802.1Q chapter I.3 contains a proper network packet
priority to traffic class mapping. The original mapping was
clearly incorrect.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In the future, when bootstrap support is added, this config won't
be used. Let's remove it.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Now that the LWM2M_OP_* bits have been renumbered, we no longer need
a custom BIT() macro for the LwM2M code. Let's remove it and use
BIT() instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove unused OP flag LWM2M_OP_NONE and renumber the existing flags
so that the operations used in object permissions land in the lowest
bits, and extended operations come later.
We may eventually add more permission / data flags, so let's try and
keep them inside a 1 byte boundary (flags with bits 0 to 7).
NOTE: LWM2M_OP_DELETE is currently not checked as a permission but
it may be in the future so it is in the lower bits.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When a data pointer or data length is not set, the read and write
handlers should return ENOENT to generate the correct LwM2M error
code (COAP_RESPONSE_CODE_NOT_FOUND).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Before ever call of string_to_path(), the lwm2m_obj_path object
was being cleared via memset. Let's move the memset into
string_to_path() to remove the duplicate code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Eliminate several similar code-blocks by replacing
engine_get_resource() with a more useful function called:
path_to_objs()
By supplying an lwm2m_obj_path object, it will find and set
the related values for:
struct lwm2m_engine_obj_inst
struct lwm2m_engine_obj_field
struct lwm2m_engine_res_inst
NOTE: NULLs can be supplied where the returned value is not
important.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add functions that will return correct source IPv4 address
according to given destination address. This is done similar
way as for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With fragmentation disabled echo server responds to packet fragment with
ICMPv6 message Type: "Parameter Problem (4)", Code: "unrecognized Next
Header type encountered (1)". If a fragment with payload length 15 is
received in response sent by echo server IPv6 payload length and ICMPv6
checksum are wrong. This patch solves the issue by correcting payload
length.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
The code was accessing network pkt before the value of the pkt
was checked.
Coverity-CID: 185394
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes crash caused by double free from message sequence
fragmentation. When double free happens the call stack is:
0 reassembly_cancel
1 handle_fragment_hdr
2 net_ipv6_process_pkt
3 process_data
4 processing_data
5 net_rx
6 process_rx_packet
7 work_q_main
8 _thread_entry
So at first packet is unrefed in reassembly_cancel and then also in
processing_data.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
After successful send, the packet is automatically cleared, so
trying to call print_send_info() on it leads to errors:
[net/pkt] [ERR] net_pkt_tcp_data: NULL fragment data!
[net/tcp] [ERR] net_tcp_get_hdr: NULL TCP header!
(if error logging enabled).
This change is similar to how print_send_info() is called in
existing send_reset() function of this source file.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we have multiple network interface (like in VLAN), then we need
to select the proper local interface based on destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always using default interface, use the IPv4 target
address to select the correct network interface when sending
IPv4 ping request.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have multiple network interfaces and we want to send
a IPv4 network packet to certain destination, then this new
helper can be used to figure out what network interface to use.
Note that this commit only adds support to select the correct network
interface according to destination IPv4 address. This does not enable
any automatic routing to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This module exposes for now the net mgmt for WiFi: connect, disconnect
and scan commands.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Exposing connect, disconnect and scan for now.
In case the iface is an instance of a WiFi offload device, the way it
manages scanning, connecting and disconnecting will be specific to that
device (not the mgmt interface obviously). In such case the device will
have to export relevantly a dedicated bunch of function to serve the
mgmt interface in a generic way.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Wifi mgmt interface will be required by offloaded wifi device drivers
therefore when selecting this interface, make sure dependencies are
selected too.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add empty WiFi network management functions that only return -ENETDOWN.
Define management handlers for scan, connect and disconnect requests,
again without any implementation nor parameters defined.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
First because nobody needs to know that besides net_mgmt core and
secondary to avoid possible circular dependancy on
net_mgmt.h/net_event.h.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previously, with CONFIG_OFFLOAD enabled, net_if_up() and
net_if_down() were calling l2->enable, which didn't exist,
so was crashing.
Instead, if CONFIG_OFFLOAD is enabled, it will test for if the net_if is
of an offload type and react accordingly.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
According to RFC 793 we should wait for FIN in FIN_WAIT_1 and
FIN_WAIT_2 states. Receiving ACK in FIN_WAIT_1 just moves us to
FIN_WAIT_2 state.
Right now TCP connection is never closed if FIN is not received
in FIN_WAIT_2 state. Fix that by keeping fin_timer active in
FIN_WAIT_2 state, but canceling it just after FIN is received.
Fixes: 124c067027 ("net: tcp: Cancel the fin_timer on FIN message
in FIN_WAIT1 state")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Without that, if ipv4 is configured via DHCPv4, server will not be
accessible. It looks like it won't properly bind addresses.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Removed OT_PLAT_RADIO_DEVICE_NAME
- Changed OpenThread binding to use NET_AP_IEEE802154_DEV_NAME
- Modified Kconfig chain to ensure NET_AP_IEEE802154_DEV_NAME
is enabled for both native 802.15.4 and OpenThread configurations
- Changed default setting of NET_L2_IEEE802154 in defconfig for mkw41z4.
- Fixed OpenThread api support code to use the state of mIsCcaEnabled
in the transmit frame to conditionally invoke radio_api->cc() on
transmits.
Signed-off-by: David Leach <david.leach@nxp.com>
- Debug code did not compile when level set to DEBUG.
- OpenThread has a define for BASE which conflicts with the BASE
field in MTB_Type defined in MKW41Z4.h. The change is consistent
with how it was handled in the KW41 port in OpenThread.
Signed-off-by: David Leach <david.leach@nxp.com>
- There is a mismatch when interfacing with external code where a
uint32_t is defined as a parameter and internal Zephyr code attempts
to use u32_t. If NewLib is used, the typedef for u32_t is
'unsigned int' which is not a portable match to uint32_t as
'unsigned int' is not a common size across architectures so gcc will
output a warning.
- The mcux flash code calls NXP supplied functions that expect a
uint32_t.
- openthread.c ot_state_changed_handler has a uint32_t flag as a
parameter.
Signed-off-by: David Leach <david.leach@nxp.com>
Make sure we are able to collect ethernet statistics and query
it via net management API.
Fixes#6899
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We returned too early when creating listeners which meant that
IPv4 listener was not created if IPv6 one was created successfully.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Missing newline on end of the file - this cause failure
while try to use menuconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This will permit to tweak ethernet L2 and devices settings at runtime.
Currently, only devices settings are tweaked through this interface.
Fixes#6640
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will be additional source files coming in, so let's not clutter l2
root directory.
Reordering a bit l2 Kconfig: offload part come first, then the l2
drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function should be exposed if only vlan is enabled.
Also, changing vlan_setup's signature to stay consistent with device
driver API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of one global statistics, collect statistics information
separately for each network interface. This per interface statistics
collection is optional but turned on by default. It can be turned
off if needed, in which case only global statistics are collected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we return proper network statistics data if
someone asks it via network management interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have several network interfaces and not all of them are
VLAN enabled, then we might return wrong network interface to
the ethernet device driver when it asks one. To fix this, return
the first interface that has not enabled VLAN if the tag of the
network packet is unspecified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Although very unlikely, make sure that if the net_recv_data() is
called with NULL network interface or packet, we recover that and
return error to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to take a network interface down or bring it up.
The command syntax is "net iface [up|down] [index]"
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add commands to add, remove or get information about VLANs
attached to network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the sanitycheck tests were having too small limit for
network buffers when compiling for sam_e70_xplained board.
Increase the buffer limits when testing this for this board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the priority currently fits u8_t then use it instead of int
for priority value for queue and thread.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The array size checks were incorrect.
Coverity-CID: 183482
Coverity-CID: 183485
Fixes#6883Fixes#6885
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SYN flood causes crash in RX thread due to NULL pointer access. After
the crash available RX memory is zero, hence echo server does not
respond to echo request.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When dns_get_addr_info() returns an error it does not call the
resolve callback, and thus the semaphore will not be given.
This fix will avoid a deadlock situation for various errors.
Added some small tests for getaddrinfo().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Callers of dns_get_addr_info() depends on receiving an end-of-results
callback (where 'info' is NULL) when finished. Do this on failure in
cb_recv() instead of pointing to an empty object.
This fix will avoid a deadlock situation in getaddrinfo().
A reply code other than "no error" in the DNS response is a typical
case when the lookup failed and this occurs.
Moved "struct dns_addrinfo info" variable from cb_recv() to dns_read()
because it was now unused in cb_recv().
Adding tests for this requires network access and a DNS server,
or a mechanism for generating a DNS response with a reply code.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Do not lookup DNS AAAA entries if IPv6 is disabled. The result can not
be used anyway because "struct sockaddr" does not have enough space for
IPv6 address in that case.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Move core TCP functionality from net_context.c to tcp.c. Create empty
functions that the compiler can remove if TCP is not configured. As a
result remove TCP ifdefs from net_context.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Similar to the socket connect() call, calling connect for a UDP
context needs to set both local and remote addresses and port
number. Fix this not to be exclusive for TCP.
Similarly, the remote destination can be a multicast address when
UDP is used.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Queue a TCP FIN packet when needed if the socket was connected or
listening and where FIN wasn't already received.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
A new context cannot have callbacks set, as it was freshly created
in the beginning of the function. Thus the extra callback clearing
can be removed. This is a left-over from commit ce41d5f432.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Ifdefs around TCP code can be removed since the TCP code will compile
to empty functions when not enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Refactor sendto() code so that destination address and its validity
is checked first, followed by offloading verification. Move context
and shutdown checks into TCP queueing function.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
With CONFIG_NET_TCP is not set, provide empty static inline
prototypes for all TCP functions available to other parts of
the IP stack.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The "net stacks" command was printing TX or RX thread values so
that it was not possible to use the values in debugging easily.
Add traffic class value when printing the info so that it is
easy to see what TX or RX queue is doing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add statistics for number of packets and bytes to each traffic
class. Print this information in net-shell.
Also make sure that we do not calculate total packet length many
times. So calculate network packet total length once and then use
that value instead of calculating it many times in a row.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add context option support and implement PRIORITY option that
can be used to classify the network traffic to different trafic
classes according to said priority value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previous way was too lazy. Now let's match exactly for the layer and the
layer code.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Make sure also to increase in_event if only inserting event info was
properly done.
Raising also range limit in Kconfig to a much higher value.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the service parameter optional in getaddrinfo().
The application should be able to use NULL as service when only
interested in the host lookup.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Add support for MSG_DONTWAIT flag in send() and sendto(). This
aligns with the same flag used in recv() and recvfrom().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
There was not enough space for \0 at the end of the string.
Coverity-CID: 183057
Coverity-CID: 183050
Fixes#6675Fixes#6682
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_PEEK flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Memory leak occurs if neighbor table is full and echo request from an
unknown neighbor is received. Hence, on an attempt to send NS unref of
pending is not done, causing the memory leak.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
This was reported by valgrind
Source and destination overlap in memcpy(0x80c18c0, 0x80c18c0, 6)
at 0x4035C3E: memcpy (vg_replace_strmem.c:1023)
by 0x80978CA: ethernet_send (ethernet.c:319)
by 0x8061B9B: net_if_send_data (net_if.c:281)
by 0x805F215: net_send_data (net_core.c:399)
by 0x8080998: send_mldv2_raw (ipv6.c:2858)
by 0x8080BA6: send_mldv2 (ipv6.c:2889)
by 0x8080D6C: net_ipv6_mld_join (ipv6.c:2915)
by 0x8061EF0: join_mcast_allnodes (net_if.c:438)
by 0x8062CA4: net_if_ipv6_addr_add (net_if.c:826)
by 0x8062296: net_if_start_dad (net_if.c:557)
by 0x8066667: net_if_up (net_if.c:2107)
by 0x8066AF0: net_if_post_init (net_if.c:2341)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As following commits need this functionality, create a function
which converts "01:02:ab:fe:34:dd" type hex strings to array of
bytes. Change the SLIP driver to use this new function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_DONTWAIT flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Instead of CONFIG_COAP_MBEDTLS_SSL_MAX_CONTENT_LEN, use recently
introduced CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Since this function is used on some drivers, and knowing these drivers
can be built for OpenThread, let's make it generic and out of the
802.15.4 L2 stack.
Fixes#5942
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If net-shell is enabled then it could try to access neighbor state
names. This would cause compile error as net_ipv6_nbr_state2str()
function is then missing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to check the debug level to be INFO or higher, otherwise
the some of the variables in net app init.c will give unused
warning. Also the sys_log.h needs to be included _after_ we have
set the logging level, this is done by net_core.h so we should
not include the syslog header file here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit creates a websocket library that can be used by
applications. The websocket library implements currently only
server role and it uses services provided by net-app API.
The library supports TLS if enabled in configuration file.
This also adds websocket calls to HTTP app server if websocket
connection is established.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor recvfrom code for handling SOCK_DGRAM into zsock_recv_dgram
to align with SOCK_STREAM. Add flags parameter, will be used later.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
This commit fixes incorrect Ethernet frame check sequence and ICMPv6
checksum caused by MTU set to zero in RA
Fixes#6342
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
We use ctx->user_data to hold socket flags. As each call to
net_context_recv() and net_context_send() overwrites its previous
value, we explicitly must pass the current ctx value there.
Without this, non-blocking socket was turned into blocking after
e.g. switching from receiving to sending.
Fixes: #6309
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If accept callback is called with error, don't treat the context
passed to the callback as a new accepted context.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We pass normal 1-based mask, and mask invert it before logically
AND'ing with the value. This apparently a mix-up between how the
mask was intended to be passed initially and how it was in the end.
This issue actually didn't have an effect, because currently defined
flags have mutually exclusive lifetime (when "eof" flag is set,
"non-blocking" flag value is no longer import). Anyway, that's a
bug and needs fixing.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_app_ctx maintains multiple net contexts(net_ctx). But when http
api's wants to reply or send some data, its always choose the first
net_context in the array, which is not correct always.
net_app_get_net_pkt_with_dst() api will select proper context
based on destination address. So with the help of new api in
net_app, http can select proper context and send packets. To
achieve this, desination address is provided in http_recv_cb_t
and http_connect_cb_t callbacks. Also chaged relevant API's to
provide destination address in http message preparation methods.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We're missing a k_sem_give for contexts_lock in the
CONFIG_NET_OFFLOAD path of net_context_put().
This fixes a network hang which occurs after any http_close()
call when CONFIG_NET_OFFLOAD is enabled.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In commit 9489fa54cc ("net: http: Fix http_prepare_and_send"),
the logic for when to call http_send_flush() was incorrect. This
is causing a call to http_send_flush() every time
http_prepare_and_send() is called.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In previous version of the HTTP API, commit 8ebaf29927 ("net: http:
dont timeout on HTTP requests w/o body") fixed handling of HTTP
responses without body content.
For the new API, let's add a specific fix for when PUT/POST requests
are responded to with just the status code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This commit fixes the crash of echo server from unsolicited RA with
reachable time set to 2147483648. The crash was in
net_if_ipv6_calc_reachable_time because such large value resulted in
modulus by zero due to integer overflow.
Fixes#6382
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Use ccache when building OpenThread. When the cache is warm, I was
able to observe that this patch sped up a clean build from 45 seconds
to 33 seconds.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This doesn't appear to be used by anything in Zephyr. Remove it,
as it doesn't perform correct bounds checking.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If net_icmpv6_get_na_hdr() returns NULL (which is possible with a
specially crafted packet), utility functions net_is_solicited(),
net_is_router(), and net_is_override() will attempt to read invalid
memory.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
mbedTLS log level is obviously a mbedTLS config setting. It makes
sense to have it defined in mbedTLS Kconfig, and different parts
of Zephyr to reuse as needed (e.g. net-app vs upcoming TLS wrapper
for sockets).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Pool size is no longer available so it is no use trying to print
its value. This change was introduced in commit dd09cbc1c4
("net: buf: Redesigned API with split data and meta-data")
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes the crash of echo_server from overflow in ICMPv6 NS
source link-layer address option.
Fixes#6235
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When IPv6 and IPv4 both are enabled and net_app acting as a client,
configuring local context has one glitch.
After selection of IPv6 context as a default context function
should return immediately, otherwise it continue to select IPv4
context as default context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of TCP and node acting as a APP_SERVER it can have multiple
concurrent connections. Calling close callback when there are still
active connections exists, causing an issue.
e.g. When a node acting as a HTTP server and can support multiple
TCP connections. Let's say one of the connection is in closing
state and the rest are still in active state. net_app_ctx is
calling close (http_closed) callback of registered upper layers.
HTTP assumes all the connections are closed and unref all the
connection related stuff.
Call the close callback only when there are no active connections.
Patch has also moved TCP stuff under one #ifdef.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of having K_FOREVER when allocating a packet in IPv4 ARP
and IPv6 ND, set a timeout so that we do not have a case where we
would wait net_buf forever.
Fixes#5484
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPSP channel is disconnected call net_if_carrier_down instead of
net_if_down since the later may still attempt to send packets while the
former just discard them immediatelly.
Fixes#5317
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces net_if_carrier_down so the L2 driver can inform when it
has lost connectivity so all packets shall be flushed and the interface
should be put down.
Fixes#5317
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Avoid using an uninitialized pointer when adding headers to the HTTP
context.
Coverity-CID: 178792
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In net_app_init_client(), the remote port is set after an initial
set of checks based on the remote_addr's assigned family.
However, if the peer_addr_str is a host name which needs to be
resolved via DNS, the family won't be set yet, and the port is
left as 0.
To fix this behavior let's move the port assignment after the
DNS lookup section to be sure that the remote sa_family is set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Difference being that the data is not, then, allocated from the pool.
Only the net_buf is.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If context is bound to IPv6 unspecified addresss and some port
number, then unspecified address is passed in TCP reset packet
message preparation. Eventually packet dropped at the peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Zephyr doesn't have luxury to create re-transmit timer per packet. So
it has different methods to handle packets in queue. But re-sending
packets on valid ack messages causing issues.
E.g. A TCP node sent two packets (packet-1, packet-2). Peer replied
two ACKs (ACK-1 and ACK-2), and these two ACK's are at rx_thread
queue. Now ACK-1 is handled and reference of packet-1 is freed
from sent list. Then if condiftion (valid ACK and connection
state is ESTABLISHED) notices that, sent list is not empty.
Restart the timer, modify sent flag and resend packets in a
list. Here packet-2 is sent again, even though ACK-2 is already
received. Situation is worse if there are more packets in the
list.
So only start the re-transmit timer in-case queue is not empty. It
allows rx_thread to handle all incoming packets (in this e.g ACKs).
When the re-trasmit timer expires, it sends the packets which
are left in queue.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of failed to get source address from the net packet,
release the assgined tcp backlog entry. Otherwise it will
never be freed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
k_delayed_work_cancel(&context->tcp->fin_timer) called twice
immediately one after other.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
RFC 7252, sec 4.8 [https://tools.ietf.org/html/rfc7252#section-4.8]
The default MAX_RETRANSMIT is 4, current implementation only
retry 3 times. Update next_timeout() to return one more retry.
Also, add a TODO for random generated initial ACK timeout
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The existing implementation assumed DNS resolv callback will be
called just once, but that's not always the case (apparently,
for multi-homes hosts or something). So, apply array bounds
checking (and do pointer arithmetic only after it, as the C
standard otherwise warns of "undefined behavior"). In such a case,
the port number wasn't set in each entry too, so rework how it's
done.
The issues discovered while resolving archive.ubuntu.com.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Since all in-tree users are good with 4 bytes of user data, reduce the
default to 4. Also fix the default and rage values where apparently
'0' and '8' had been swapped.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce two new "standard" data allocators to net_buf. There are now
three in total:
NET_BUF_POOL_FIXED_DEFINE: This is the closes to the old
implementation, i.e. fixed size chunks. It's also what the old
NET_BUF_POOL_DEFINE macro maps to.
NET_BUF_POOL_HEAP_DEFINE: uses the OS heap
NET_BUF_POOL_VAR_DEFINE: defines a variable sized allocator using
k_mem_pool (this is all that there was in my first draft of this
feature)
Currently the variable length allocators (HEAP & VAR) support
reference counted data payloads, i.e. cheap cloning. The FIXED
allocator does not currentlty support this to allow for the simplest
possible implementation, but the support can be added later if
desired.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Redesign of the net_buf_simple and net_buf structs, where the data
payload portion is split to a separately allocated chunk of memory. In
practice this means that buf->__buf becomes a pointer from having just
been a marker (empty array) for where the payload begins right after
the meta-data.
Fixes#3283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added a new API to get net pkt based on dst address. Destination
address will be used to find correct net_context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_app_ctx has multiple net_contexts, selecting net_context
based on dst address has some glitches.
E.g. One net_app_ctx and two net_contexts (net_ctx1, net_ctx2).
Both net_contexts are mapped to net_app_ctx.
When a caller looking for net_ctx (e.g. net_ctx2) with
matching dst address. Loop goes through net_ctx1 and dst
doesn't match. But another if condition checks does this
net_context mapped to net_app_ctx, yes it matches.
So return net_ctx1, which is wrong.
So first go through all elements in array of net_contexts for
matching dst address, if it fails to find then go for matching
net_app_ctx.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Default network interface is the first interface if there are multiple
interfaces exist. But this creates an issue when different parts of
the network subsystem wants to choose particular default interface.
At-least with this Kconfig option user can select default network
interface.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The code in the LwM2M "Device" object was checking for this max
power source config value, except that it was never added as a
Kconfig option. Let's go ahead and add it so apps can set the
value appropriately.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When attempting to read an unused multi-value resource such as
"Available Power Sources", lwm2m client return a successful coap packet
w/o any values. This looks like a timeout to any lwm2m servers which
make sure a valid response is returned.
Let's fix this by returning the correct NOT_FOUND error code instead.
NOTE: To test this I commented out the portion of the lwm2m client
sample which initializes the LWM2M_DEVICE_PWR_SRC_TYPE_BAT_INT and
LWM2M_DEVICE_PWR_SRC_TYPE_USB values. By default, the sample will
setup dummy values to be returned by the client.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
As per review of PR #5893, this is a follow up patch to update
select_writer() API to match the behavior of select_reader() API.
Quote from OMA-TS-LightweightM2M-V1_0_1-20170704-A. 8.2.5
"An Object Instance or Resource is Read by sending a CoAP GET to the
corresponding path. The response includes the value in the
corresponding Plain Text, Opaque, TLV or JSON format according to
the specified Content-Format (see section 6.4).The request MAY
specify an Accept option containing the preferred Content-Format
to receive. When the specified Content-Format is not supported by
the LwM2M Client, the request MUST be rejected."
Therefore, we do not attempt to assign a content-format when the
requested one is not supported. Instead, we return an error code.
0 is returned when reader or writer has been successfully selected by
select_reader() or select_writer()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Currently, we always set the content-format as "plain/text" when
it is unrecognized. This is wrong for it's possible that payload
is actually something else.
For example, we don't support JSON as incoming format right now.
But if I send a PUT request to /1/0/1 (server objectinstance/lifetime
resource) with value 3200 in JSON format: {"e":[{"n":"","v":3200}]}.
The client will still handle the request and respond with changed (2.04)
except the lifetime resource is updated incorrectly due to parsing
error.
Correct the behavior by not setting a default format and respond with
content-format-not-support error code (4.15)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
net_pkt_append() has been changed. If payload reached max value
of 'data_len' in net packet, net_pkt_append will not append.
So the caller has to create new packet and append remaining payload.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Unlinking of neighbor also needed after nbr_unref. Otherwise
neighbor id is still in use and can not be linked further.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a node receives DIO message from peer then node adds peer as
a neighbor (nbr with linklayer address). But when a node receives
DAO message from different peer (chances are peer selected
different route to reach this node), remove peer with previous
link layer address and add as a neighbor with new link layer address
with new route information. Now node can properly route packets to
peer from neighbor table or based on nexthop information from
routing table.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a node joins in DAG network, it chooses neighbor (node or border
router) as its parent. But if it receives DIO message from another
peer, it can only act as a neighbor, not as a parent. If peer rank
is better than current preferred parent rank then node will select
new peer as it's best parent.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RPL prints lot of debug information which is difficult to track.
Minimized debugs in timer specific information and parsing of
DIO and DAO options. Also fixed alignment issues (no changes in
functionality)
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Do not even consider the push event if CONFIG_NET_MGMT_EVENT_INFO
enabled and info length is more than NET_EVENT_INFO_MAX_SIZE.
Print error message and ignore the event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current default value for NET_RPL_INIT_LINK_METRIC is 2, changing it
to 1.
e.g. NET_RPL_MIN_HOP_RANK_INC is 256 and NET_RPL_MC_ETX_DIVISOR is 256.
Rank calculation for nodes is
rank_increase = CONFIG_NET_RPL_INIT_LINK_METRIC *
NET_RPL_MC_ETX_DIVISOR;
Which gives 768 for first set of child nodes. It would be good if
CONFIG_NET_RPL_INIT_LINK_METRIC value is 1 and nodes ranks will be
245, 512, 768 based on the path they choose.
User can absolutely change their configuration to maintain proper ranks.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When CONFIG_NET_RPL enabled, do not run DAD (duplicate address
detection) for global addresses. In RPL mesh network global addresses
for nodes are determined by prefix from Border Router. DAD is not
necessary in this case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_MGMT_EVENT_INFO is enabled then provide mgmt info
about the route, which is added or deleted.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_MGMT_EVENT_INFO is enabled then provide mgmt info
about the neighbor, which is added or deleted.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remove any routes with neighbor as a nexthop first and then remove
neighbor from neighbor table.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_ipv6_prepare_for_send() needs to route packets, it missed
updating of RPL header.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Doing neighbor discovery in RPL network is not necessary and
that can be disabled in RPL nodes. Unfortunately the border
router needs to have ND enabled as it has also non-RPL network
interfaces in use. So in this case, mark RPL node as always
reachable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As this is very specialized info which is not normally needed,
do not print it by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introduce CONFIG_NET_ROUTING option that allows the IP stack
to route IPv6 packets between multiple network interfaces.
No support for IPv4 routing is implemented by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removes variable shadowing another declared
previously but does not change anything
functionally.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
prepare_segment() returned NULL in case of any error, which then
net_context_send() translated into -EINVAL. That's highly confusing
though, because a common case of failure for prepare_segment() is
being unable to allocate data fragment(s) (for TCP header, etc.)
So, return output pkt by reference, and detailed error status as
a return value.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During the CoAP API change, slight changes were made the ref / unref
packet pending process. Let's re-align with the coap-client sample
in how we apply the packet refs in retransmit_request() and also
replace the lwm2m_send_message() call with a direct call of
net_app_send_pkt(). This avoids a second processing of the pending
packets and keeps the ref/unref flow cleaner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
During the CoAP API change, the way packets were ref'd and then
unref'd in order to stop the packet sending functions from releasing
the net_pkts was changed and never updated in the LwM2M library.
Let's use coap_pending_cycle() and coap_pending_clear() to do the
ref/unref the same way as the coap-client samples in order to
match the pending process with the current CoAP APIs.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Fraction could be stored with negative value.
The implementation was only considering the positive value case.
Therefore, we have to modify the code to take care of the case.
To test it
======================================================================
1. launch eclipse/wakaama lwm2m server
2. launch zephyr lwm2m client and wait for registration completed
3. Issue commands from server
* attr 0 /1/0/1 -0.1 0.1
* disc 0 /1/0
Current output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
105 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=0/00000,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Expected output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
102 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=-0.1,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Add OpenThread to Zephyrs net stack as data link layer.
OpenThread requires to call process function when an event occurs.
This process function is called from cooperative thread.
Packet conversion and dispaching is implemented in openthread.c
as well as addresses forwarding.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
OpenThread requires platform definition with standarized API
so we have to add wrappers to make it compatible with Zephyr.
OpenThread is based on autoconf, this requires
more specific CMakeLists.txt which allows to clone specific
commit or point to local copy of openthread.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that static config is used unless/until DHCP values
arrive. This allows to have the same network configuration values
for both a case of direct board - workstation connection (where
DHCP is usually not available), and a case where both a board and
workstation connect to a router (which serves DHCP).
The changes in this commit however take care of netmask and gateway
settings, but not about IP address itself. This is addressed in the
next patch.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Actually set Zephyr's default DNS server based on the corresponding
DHCP option received. This makes DHCP-based setup Zephyr complete:
now it's possible to connect Zephyr DHCP-enabled system to a typical
router, and it will fully auto-configure to access Internet.
This initial implementation uses just first DNS server address as
returned in DHCP message, it may need to be extended in the future
based on the need.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The offset of the IP header in a received packet depends on the L2
header size. For Ethernet this is 14 bytes which puts the u32 IPv4
addresses on a non-u32 byte boundary. This causes chips that don't
support unaligned access (like the Cortex-M0) to fault.
The fixes in this patch are enough to ping the board and run the
http_server sample.
Signed-off-by: Michael Hope <mlhx@google.com>
For some reason, ieee802154_verify_channel had a device parameter
instead of an iface like all the others.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be up to the user to configure a valid channel, through
net_mgmt, and call net_if_up() in order to get the device up.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Depending on device's band, the upper channel limit can vary a lot in
Sub-Ghz. Thus verifying it directly in L2 before requesting it to the
device.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Sub-Ghz bands have different limit of channels. 10, or more than a
thousand is actually possible. Thus the device needs to expose such
limit to the L2 which is unaware of frequency band logic. L2 will
then allow user to select a proper channel.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This field is set and maintained, but not actually used for anything.
The only purpose for it would be to validate ACK numbers from peer,
but such a validation is now implemented by using send_seq field
directly.
Fixes: #4653
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Case #1: If ACK received and our retransmit (i.e. unacked) queue is
empty, it's error. It's incorrect because TCP requires ACK to set for
every packet of established connection. For example, if we didn't
send anything to peer, but it sends us new data, it will reuse the
older ack number. It doesn't acknowledge anything new on our side,
but it's not an error in any way.
Case #2: If retransmit queue is only partially acknowledged, it's an
error. Consider that we have 2 packets in the queue, with sequence
numbers (inclusive) 100-199 and 200-399. There's nothing wrong if
we receive ACK with number 200 - it just acknowledges first packet,
we can remove and finish processing. Second packet remains in the
queue to be acknowledged later.
Fixes: #5504
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per RFC 793:
A new acknowledgment (called an "acceptable ack"), is one for which
the inequality below holds:
SND.UNA < SEG.ACK =< SND.NXT
If acknowledgement is received for sequence number which wasn't yet
sent, log an error and ignore it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As title, we should update the existing observe_node when new attributes
are written from server side. Add the implementation to handle that.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1. Read notification attributes set by server to setup the
minimum/maximum notification period of a observation request.
2. Reordering to check observe_node duplication first
(bailout earlier)
3. Simplify remove observe_node condition checking
NOTE: attributes are inheritable, priority: res > obj_inst > obj
Reference: LwM2M spec V1_0_1-20170704-A, section 5.1
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Since we've added storing notification attributes written by server.
We can now append these attributes as part of link-format for discover
op.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Implement write-attribute on obj/obj_inst/res according to LwM2M spec
20170704-A, sec 5.1.2. Support pmin/pmax/st/gt/lt parameters on WRITE
operation.
The basic idea is to add sys_slist_t to obj/obj_inst/res structure.
And attach struct lwm2m_attr to the list when attributes are written
from server side (implement lwm2m_write_attr_handler accordingly)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The ICMPv4 handler needs to unref the received echo reply packet
because we are returning NET_OK to caller. Similar change was done
for IPv6 earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of accessing the environment variable ZEPHYR_BASE every time we
require accessing the source code root, use an intermediate variable
that has OS path separators correctly set to '/' to avoid issues on
Windows.
Note: This removes the ZEPHYR_SOURCE_DIR CMake variable. External
applications using that will need to change to use the new ZEPHYR_BASE
variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When testing ping6 with net shell, it was noticed that after some
sucessive calls the applications stopped to handle rx packets.
Analyzing other icmpv6 register callbacks it was verified that is
necessary to unref packets before returning NET_OK.
Signed-off-by: Pedro Martucci <pedropaulomartucci@gmail.com>
commit 2a7546fb5a ("net: lwm2m: add support for coap2coap proxy")
erroneously changed the COAP_OPTION_* used to specify the coap2coap
or coap2http proxy resource used from COAP_OPTION_URI_PATH to
COAP_OPTION_PROXY_SCHEME.
Changing it back to COAP_OPTION_URI_PATH requires us to re-order how
the coap options are appended to the packet as the coap options must
be added in the order specified by the numbers in:
https://tools.ietf.org/html/rfc7252#section-12.2
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
CoAP packet w/ confirmation flag set is required to be retransmitted
before it got the ACK message from the peer.
However, the packet is usally unreference once it's sent to the network.
Although we set the timeout as no wait when calling function
net_app_send_pkt(), it's still possible that the packet is unreferenced
before we got a chance to increase the packet reference by calling
coap_pending_cycle().
Usually, the IP stack will generate an ARP packet first and then send
out the packet. However, this is not the case when the remote is a
loopback address.
As issue #5101 described, when asking client to perform a firmware pull
on URL "coap://127.0.0.1:7783/large". The packet will be unreferenced
immediately after calling net_app_send_pkt(). Which then result in
client hang.
The solution to the issue is to increase the reference count on the
sending packet and decrease it after the process is finished.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We shouldn't limit the amount of data appended to RX packets based on
the max send size of TX packets. Skip this check for packets in the
RX slab.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This reverts commit 3599d793c2.
Setting a packet's data_len here doesn't fix the fact that we shouldn't
be using it at all on RX packets. Fix belongs in net_pkt_append().
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When testing TLS connections on production web server, it was noticed
that the TLS mainloop was getting "hung" after a connection was made
via HTTPS and then closed by the server. The TLS mainloop was never
being notified that the connection was closed and was stuck waiting
for more data.
The next time that connection was used, TLS would fail to start.
Let's force trigger a closure of the TLS process when the net-app layer
is notified of the connection closure. This allows the connection to
be successfully reused later.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The net code doesn't use libc stdio stdout in any way, so there's no
need tweak those options.
Fixes: #5565
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This fixes a bug when calling net_pkt_append[_all] which uses
pkt->data_len as part of the maximum packet length calculation
when the net_context is set.
Without this change the maximum packet length is calculated as 0
(the value of pkt->data_len) and an ENOMEM error is returned.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Commit 753daa6 ("net: pkt: Compute TX payload data length")
removed the default packet setup on incoming packets when they
belong to the rx_pkt pool.
Let's restore this behavior, as MBEDTLS processing in net_app library
needs to use packet family to determine IP header length on
incoming packets.
NOTE: A future cleanup patch could set the IP header length based
on the context IP family. However, there are many places in the code
where this is being set, so care should be taken.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Do not reset net_context information in net_app_close. In case of
TCP behind the curtains connection might wait for some timers to
expire and send some messages (e.g. ACK). If we set source port to
'0', unexpected behaviour might happen with peer connection.
Only reset net_app context related information on net_app_close.
Let net_context_put will take care of proper connection closure.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Right now in FIN_WAIT1 state, if we receive FIN+ACK message, then
tcp state changed to FIN_WAIT2 on ACK flag and immediately on FIN
flag state changed to TIME_WAIT. Then final ACK is prepared and sent
(in queue at-least) to peer. Again immediately state changed to
TCP_CLOSED, where context is freed. net_context_put frees context
and releases tcp connection. Final ACK packet which is in queue
is dropped.
As a side effect of freed ACK packet, peer device keep on sending
FIN+ACK messages (that's why we see a lot of "TCP spurious
retransimission" messages in wireshark). As a result
of context free (respective connection handler also removed), we see
lot of packets dropped at connection input handler and replying with
ICMP error messages (destination unreachable).
To fix this issue, timewait timer support is required. When tcp
connection state changed to TIMEWAIT state, it should wait until
TIMEWAIT_TIMETOUT before changing state to TCP_CLOSED. It's
appropriate to close the tcp connection after timewait timer expiry.
Note: Right now timeout value is constant (250ms). But it should
be 2 * MSL (Maximum segment lifetime).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
fin_timer will be started after sending FIN to peer. After successful
reception of FIN+ACK message in FIN_WAIT1 state, fin_timer should be
cancelled.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Consolidate and standardize error handling throughout
lwm2m_obj_firmware_pull.c. As well as handle previously
unhandled errors returned from transfer_request().
NOTE: in general, unhandled errors will now result in
RESULT_UPDATE_FAILED. Previously, unhandled errors in
transfer_request() would result in RESULT_CONNECTION_LOST
which might or might not be over-written with another
result later.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The CoAP samples use an MBEDTLS config "config-coap.h" which could be
re-used by the LwM2M sample, except that most servers use a larger
maximum content length setting of 1500 bytes.
Let's add a CONFIG to set this for users of the CoAP lib and set the
CONFIG value for the samples to the 256 size currently used.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, LwM2M firmware download only supports coap2http proxy.
Let's add support for coap2coap proxy as well.
This was tested running Californium demo app cf-proxy on the host
machine with the following setting changed in Californum.properties:
MAX_RESOURCE_BODY_SIZE=524288
Add the following to the samples/net/lwm2m_client/prj.conf:
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_SUPPORT=y
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_ADDR="coap://[2001:db8::2]:5682"
Build the sample for qemu_x86 as you would normally, but now
you can use a real world coap address to pull firmware using the 5/0/1
resource. The host machine running cf-proxy will pull the remote
resource and then deliver it to the running qemu sample.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Add needed settings for DTLS support to the lwm2m_ctx structure.
- Add initialization of MBEDTLS to the LwM2M lib based on the
user application settings in lwm2m_ctx.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The default net_context remote address is scrambled when using a
connection via DTLS. Instead let's use the dtls context remote.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
While looping through possible lwm2m_ctx matches, we're referencing
remote before checking that the context itself is valid.
Also, reduce indentation issues.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of building under the "app" context, let's build the
LwM2M library as a separate static library. This will be helpful
later when adding support for DTLS as w/o this configuration,
the build breaks on MBEDTLS config includes.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This will avoid exposing IEEE 802.15.4 Zephyr's L2 private context data
to unrelevant places.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
L2 specific data and IEEE 802154 net mgmt interface are not related.
Plus, application may use the net mgmt part, not the L2 one. So let's
split the content in relevant headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Content-format is used to determine the type of the PUT/POST
request. Therefore, it's incorrect to assign default when the
caller does not include one in the request.
Define LWM2M_FORMAT_NONE=65535 to indicate the format is missing.
The 65000~65535 is reserved for experiments and should be safe for
the purpose. Check content-type at PUT method to setup
write/write-attrs operation accordingly.
Also, add reporting write-attrs as not implemented to the caller.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification V1_0_1-20170704-A, table 25,
incoming request is a discover op if it is method GET with
accept format as application/link-format
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification 20170208-A, there are two different
discover interfaces supported by the device.
(1) Bootstrap discover (sec 5.2.7.3) (To be implemented)
(2) Device management discover interface (Sec 5.4.2)
- object ID is required (i.e. root directory discover is not allowed)
- attributes should be responded accordingly when implemented
This patch correct the behavior according to the spec and summarized
as follow
(1) Still support CoAP ".well-known/core" but change to report only
first level of the URI.
(2) Respond to caller only when object ID is provided unless it's
bootstrap discover
Fixes#4941
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
IPv6 mcast addr to MAC mcast conversion was factored out to
subsys/net/ip/l2/ethernet.c for reuse by other drivers.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Empty CMakeLists.txt in l2 and l2/ieee802154 deserved to get filled-in
relevantly, instead of centralizing everything in ip/ location.
Also making sure lines don't get over 80 chars.
Also, no need of linking against mbetls unless net shell is enabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
https://tools.ietf.org/html/rfc4862#section-5.4.2 :
"""
Before sending a Neighbor Solicitation, an interface MUST join the
all-nodes multicast address and the solicited-node multicast address
of the tentative address.
"""
So, joining should happen before sending DAD packets, and it should
happen for each unicast address added. This is achieved by joining
from net_if_ipv6_addr_add() call. Note that we already leave
solicited-node group from net_if_ipv6_addr_rm(). In particular, we
leave it if DAD fails (as that function is called in this case).
Fixes#5282.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The reachable calculation for ND is using fractions combined with
integers and getting rounded to very small results (1ms or 0ms).
Let's split up the fraction into it's numerator and denominator
and perform the math in a better way to get the correct results.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The maximum data length that can be appended using net_pkt_append()
should be set to TCP send_mss only if it is smaller than allowed
payload length in net_pkt.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
For calculating amount of payload data that can be added in a packet,
we need to subtract IPv6 or IPv4 header lengths from MTU.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
When net debugging is enabled, the count variable is initialized to -1.
This may cause division by zero if there is only one fragment in pkt.
Solve this by setting the count to 0 and checking the value before the
print at the end of the function.
Successfully tested on STM32F407 SoC.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Compute the length of the TX payload that is transported in one
IPv4 or IPv6 datagram taking into account UDP, ICMP or TCP
headers in addition to any IPv6 extension headers added by RPL.
The TCP implementation in Zephyr is known to currently carry at
maximum 8 bytes of options. If the protocol is not known to the
stack, assume that the application handles any protocol headers
as well as the data. Also, if the net_pkt does not have a
context associated, length check on the data is omitted when
appending.
Although payload length is calculated also for TCP, the TCP MSS
value is used as before.
Define IPv4 minimum MTU as 576 octets, See RFC 791, Sections 3.1.
and 3.2.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In 90b471fe4, there was a change to make k_poll() return EINTR error
if it was cancelled with k_fifo_cancel_wait(). Handle this change, or
otherwise sockets EOF handling was broken.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, the connection will be reset easily due to a forged TCP
reset with a random sequence number.
As described in RFC793 p.69, we should check if the sequence number
falls into the receiver window at first.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Add in6addr_any and in6addr_loopback which are defined in RFC2553 Basic
Socket Interface Extensions for IPv6.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Previously, if passive close is peformed, the net context is released
after FIN is received and FIN,ACK is sent. The following last ack from
the peer will be treated as an improper packet, RST is sent to the peer.
This patch refines tcp_established() by centralizing the tcp state
transition and releases the net context only if NET_TCP_CLOSED is
reached.
Besides, the logic that releases the net pkt without appdata (i.e. ACK
or FIN) is moved from packet_received() to tcp_established(). This makes
packet_received() less dependent on the protocol and make the usage of
net pkt more clear in tcp_established().
Fixes: #4901
Signed-off-by: Aska Wu <aska.wu@linaro.org>
If net_context_recv() returns a error, net pkt will not be released. For
example, net_context_recv() returns -EBADF because the TCP connection is
closed by the peer.
Handle the return value instead of using SET_ERRNO().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
If we cannot send a DHCP message, then unref the net_pkt
in order to avoid a buffer leak. Earlier we tried to
unref NULL net_pkt which is not correct.
Signed-off-by: june li <junelizh@foxmail.com>
Token is missing when we jump to the error and token is not yet setup.
To correct it, we grab the token from the input packet at the beginning
of the handle_request()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Copy/paste error was checking minimum measurements where it
should have been checking maximum measurements.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Initial values for the min/max measurements were 0 and this caused
issues with sensors maximums that weren't above 0 and minimums that
went below 0. Let's update those to MAX_INT so the first sensor
value update will set those to correct values.
When resetting the measured values, let's use the current sensor
value not 0.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The original fragment chain of incoming packet will be lost and leaked
in case of early error, add frag back to packet and
let the caller do unref.
Fixes#4323
Signed-off-by: june li <junelizh@foxmail.com>
No need to do any IPv6 neighbor checks if the packet is routed back
to us by loopback driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is loopback interface, then let it handle all local
traffic. Loopback interface is only needed for test applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the packet is too short, the TCP header pointer might be
NULL. In this case we just need to bail out.
Coverity-CID: 178787
Fixes#4787
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
802.15.4, as other radio tech, works in little endian on network level.
To keeps things simple, the inner context per-interface, stores the
extended address that way. But it can be confusing in shell then, so
let's work handle these addreses through EUI-64 format there.
Fixes#4936
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add status error string when sending a error message from
HTTP server to client as described in RFC 2616 ch 6.1.
Previously only error code was sent except for 400 (Bad Request).
This also fixes uninitialized memory access in error message.
Coverity-CID: 178792
Fixes#4782
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ping command was not checking if the user gave target
host as a parameter. This would lead to NULL pointer access.
Fixes#4827
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we were asked to add 10KB to a packet, adding it won't help -
such packet won't be even sent by hardware on our side, and if
it is, it will be dropped by receiving side. So, make sure we
never add more data than MTU as set for the owning interface.
This actually gets a bit tricky, because we need also to account
for protocol header space. Typically, when net_pkt_append() is
called, protocol headers aren't even added to packet yet (they
are added in net_context_send() currently), so we have little
choice than to assume the standard header length, without any
extensions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When sending a packet with AR flag set, the ACK frame that should be
replied to it must holp the same sequence number, so let's verify this
properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will be place where validating only this part of the frame will be
necessary. This will avoid to run the little bit heavier
ieee802154_validate_frame().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Add a generic function for TCP option parsing. So far we're
interested only in MSS option value, so that's what it handles.
Use it to parse MSS value in net_context incoming SYN packet
handler.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Calculates full TCP header length (with options). Macro introduced
for reuse, to avoid "magic formula". (E.g., it would be needed to
parse TCP options).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
MSS is Maximum Segment Size (data payload) of TCP. In SYN packets,
each side of the connection shares an MSS it wants to use (receive)
via the corresponding TCP option. If the option is not available,
the RFC mandates use of the value 536.
This patch handles storage of the send MSS (in the TCP structure,
in TCP backlog), with follow up patch handling actual parsing it
from the SYN TCP options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The commit 971da9d0 ("net: pkt: adjust_offset: Simplify and optimize
code") changed the adjust_offset() function but left the error print
intact. This print is now invoked even if there is no error which
looks bad in debug prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The addrlen of accept() and recvfrom() is a value-result argument. It
should be updated to the actual size of the source address after
calling accept() and recvfrom().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Update the firmware update_result accordingly by checking return
value of the firmware data write callback registered by application.
Also, set response code according.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The expire function can call net_context_unref() which tries to
get a semaphore with K_FOREVER. This is not allowed in interrupt
context. To overcome this, run the expire functionality from
system work queue instead.
Fixes#4683
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An edge condition was handled in a special way, even though the main
condition covered it well. More code, more jumps == slower code,
bigger binaries.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that net_buf has "native" support for sys_slist_t in the form of
the sys_snode_t member, there's a danger people will forget to clear
out buf->frags when getting buffers from a list directly with
sys_slist_get(). This is analogous to the reason why we have
net_buf_get/put APIs instead of using k_fifo_get/put.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code parsing received net pkt to get source or destination
sockaddr repeats multiple times in net_context.c.
Eliminate the duplication by net_pkt_get_src_addr() and
net_pkt_get_dst_addr() which can handle different internet protocol
(i.e. ipv4 or ipv6) and transport protocol (i.e. tcp or udp)
Fixes: #4421
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Rename net_pkt_get_src_addr() to net_pkt_get_addr() and make it able to
handle source or destination address.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
A regression by commit 9728179757 ("Allow net_context re-connect").
The code did not create IPv4 listener if IPv6 listener was successfully
created.
Fixes#4697
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should call coap_update_from_block() which will determine the minimum
size of the BLOCK1 SIZE between server/client and update the current
offset and total size(if available) accordingly.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Add a net_buf_id() API which translates a buffer into a zero-based
index, based on its placement in the buffer pool. This can be useful
if you want to associate an external array of meta-data contexts with
the buffers of a pool.
The added value of this API is slightly limited at the moment, since
the net_buf API allows custom user-data sizes for each pool (i.e. the
user data can be used instead of a separately allocated meta-data
array). However, there's some refactoring coming soon which will unify
all net_buf structs to have the same fixed (and typically small)
amount of user data. In such cases it may be desirable to have
external user data in order not to inflate all buffers in the system
because of a single pool needing the extra memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Previous max range value for RTO was 2 seconds, increase to 60 seconds
as setting larger values can be useful when debugging retransmission
issues on slow networks.
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
Due to parameters used, net_context_recv() call cannot fail (it just
installs a callback, no I/O performed).
Coverity-CID: 178247
Fixes: #4581
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add option to set initial Retransmission Timeout value. The value is
different from NET_TCP_ACK_TIMEOUT since latter affects TCP states
timeout when waiting for ACK for example.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If we receive lot of data fragments, then yield after initial
processing so that TLS thread can start to work on these.
If we do not yield here, we pile up data buffers and might run
out of memory more easily.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It might happen in TCP client, that the TCP connection is terminated
in which case net_context is freed. Check this and mark corresponding
net_context inside net_app to NULL. This way there will be no issue
to access already freed net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The client TLS code did not handle server issued close properly.
Now the connection is terminated properly and TLS thread is left up to
wait more requests from the user.
This commits adds new boolean field to net_app context. Because there
are already multiple boolean flags there, convert them all to bitfields
to save space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the TLS handshake might take long time before connection is ready,
check this before trying to send user data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information that we are sending plain data and receiving
encrypted data, the code claimed that we are sending encrypted
data which is not the case here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user closes the client connection, then make sure that
user can just call net_app_connect() instead of calling the
client init. The client initializes everything in net_app but
for simple re-connect that is not necessary.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that objects and samples have their return values fixed, let's
propagate them back up to the user if there's an error.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Previously, post_write and execute callbacks returned 1 when handled
and 0 for error condition. However, this wasn't detailed enough and
the engine can't propagate any sort of error back to users -- so it
doesn't even check the return values in many cases!
Let's adjust the resource callback functions of all objects and the
lwm2m_client sample to return 0 for success or a valid error code.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that we can access resource data in the lwm2m subsys, let's use
the user provided firmware push buffer (5/0/0) to also store the
firmware pull data.
This way the size of the firmware pull buffer is completely up to the
application.
NOTE: This patch adds a 64 byte firmware buffer to the lwm2m_client
sample for this purpose.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With the change to support multi-fragement buffers in the LwM2M subsys,
the OPAQUE data type was direct write methods were broken.
Let's fix OPAQUE handling by using the newly introduced getter methods
which can use multiple user callbacks (depending on the size of the
user provided buffer). Let's also add public methods for users to set
/ get OPAQUE data in resources for future use with DTLS key data.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The lwm2m_engine_get_resource() function needs to be made available to
other portions of the lwm2m subsys in order for firmware resource data
to be used in the future.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
During conversion from the ZoAP to CoAP APIs the use for this variable
was removed, but the variable itself was left in place.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
No need for 2 different defines to specify URI lengths in the source
for firmware pull method. Let's combine them.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Each content formatter should have a way of handling opaque data.
For instance TLV data will individually be able to specify a length
but plain text will take up the rest of the packet.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The existing LwM2M framework expected contiguous buffers and this
was the reason for the 384 byte buffer sizes. This was previously
a limitation of the ZoAP API. The new CoAP API doesn't have this
limitation and the LwM2M library has already been migrated to use
it.
Let's finish the process by replacing any contiguous buffer handling
with the correct net_pkt APIs to parse across multiple fragments.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
application/octet-stream is used to indicate opaque payload format.
Use plain text handler to handle the opaque format.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The call to net_context_recv() with timeout returned -ETIMEDOUT
even when data was returned properly and there was no timeout.
Fixes#4565
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In bind_default(), a local variable is passed to find_available_port().
However, the port number is unpredictable as it's not initialized and
will be used directly if not zero. This will lead to problems if the
port number is already used.
This patch makes find_available_port() always returns an available port
regardless of the port number in the sockaddr parameter.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
This rework commit 77b8f5c1f6
Comparing it to BT IPSP is a the wrong comparison: BT IPSP does specify
6lo/ipv6 for it to work. Whereas 802.15.4 does not.
Instead of selecting 6lo from 802.15.4's Kconfig, let's do the reverse
way. If the user enabled 802.15.4 and IPv6 as well (to which 6lo
depends on), then 6lo is enabled by default as using IPv6 on 15.4
without it does not make much sense.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When the header file is located in the same directory as the source
file it is better to use a relative quote-include, e.g.
than a system include like
Avoiding the use of system includes in these cases is beneficial
because;
* The source code will be easier to build because there will be fewer
system include paths.
* It is easier for a user to determine where a quote-include header
file is located than where a system include is located.
* You are less likely to encounter aliasing issues if the list of
system include paths is minimized.
Authors:
Anas Nashif
Sebastian Bøe
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Recent commit fb7f6cfa97 ("net: lib: http: Fix invalid pointer
body_start") introduced logic to reset the response body_start pointer
when the response buffer was reused.
This check needs to be fixed so that it doesn't arbitrarily change
body_start when not needed.
The problem with the current check can be demonstrated by not setting
a response callback for request which generates a large response
spanning multiple packets.
In this case body_start is still valid (not reusing the response buffer
because there is no callback set), but it will be changed when the 2nd
packet is received and the "at" marker is located at the head of the
new packet (!= response_buffer).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When moving to the new CoAP API, I thought we would need to parse
incoming option values longer than 12 characters.
This hasn't proven to be true, so let's remove the auto-selection of
this config. If needed user can set this option later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Currently, we check the length of an option value in the
coap_packet_append_option() function. This isn't required as
we're appending to a net_pkt and not using struct coap_option
where the limitation is imposed.
Instead, we should check the option value length in
parse_option() where we assign the value to a struct
coap_option.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Inform user if we could not install receive callback after
a connection is created in net-app client.
Coverity-CID: 178246
Fixes#4582
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Inform user if we could not install receive callback after
a connection is accepted in http server.
Coverity-CID: 178244
Fixes#4584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of memory, then net_pkt might be null and we must
not access it.
Coverity-CID: 178235
Fixes#4593
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The body_start field at http_client_ctx.rsp is used to check if this
fragment contains (a part of) headers or not.
If the device recived more than one fragment in one http response,
may cause re-use of the result buffer in function on_body().
Once the device re-use the result buffer, the body_start that point
to this buffer address will no longer be valid.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Oftentimes, 15.4 PAN IDs are specified in hex. For example, that's
how Zephyr config specifies the default value. So, print them also
in hex, to avoid confusion.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Remove the RD client's stack in favor of using the engine's periodic
service to trigger RD client events. This saves 5K RAM of stack based
memory.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Remove the stack from the device object and instead make use of
the periodic engine service which will trigger the device service
when it's ready.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Stacks cost a lot of RAM in Zephyr. We have 3 total stacks in
the LwM2M lib. We can remove 2 of these if add a service handler
into the main LwM2M engine. Each service can register with this
handler so that they can be called based on their own periodic
timer. The handler itself will search through these registered
services and call them when they become due otherwise sleep
until another is ready.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's use conservative defaults for the LwM2M library to enable
hardware with constrained resources. Users can increase where
necessary.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's use snprintk for simple formatting to allow for possible disabling
of printf and protect calls to sprintf from string overruns.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When using Leshan REST API to perform a discover OP on a client, only an
accept field is sent with "application/link-format". Current logic uses
the content-type to determine when a discover OP is indicated. Let's
handle this case as well.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
There were decrements of TCP sequence numbers, inherited from FNET
stack implementation, as was used as an initial base. RFC793 does
not specify conditions for decrementing sequence numbers, so such
decrements are an artifact of FNET implementation. In Zephyr code,
we had to compensate for these decrements by extra increments
(including an increment-by-2). So, remove decrements and associated
extra increments to simplify the code.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's rename lwm2m_release_message() to lwm2m_reset_message()
and add a parameter to let the function know whether or not to
release the lwm2m_message resource back to the pool.
By adding the optional release parameter, we can keep the
lwm2m_message but reset the underlying net_pkt / net_buf resources.
This allows us to regenerate the net_pkt after determining
an error has occured. In this case, we don't want the previously
added net_pkt contents but we do want to maintain the message id,
token, etc.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This patch moves from the ZoAP API in subsys/net/lib/zoap to
the CoAP API in subsys/net/lib/coap which handles multiple
fragments for sending / receiving data.
NOTE: This patch moves the LwM2M library over to the CoAP APIs
but there will be a follow-up patch which re-writes the content
formatter reader / writers to use net_pkt APIs for parsing
across multiple net buffers. The current implementation assumes
all of the data will land in 1 buffer.
Samples using the library still need a fairly large NET_BUF_DATA_SIZE
setting. (Example: CONFIG_NET_BUF_DATA_SIZE=384)
Signed-off-by: Michael Scott <michael.scott@linaro.org>
From RFC 7252, section 3
"The absence of the Payload Marker denotes a zero-length payload.
The presence of a marker followed by a zero-length payload MUST
be processed as a message format error."
Check empty payload when COAP_MARKER is found and add a test case to
cover it
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Options parsing helpers functions unable to handle the malformed
packets and dropping it. Improved parsing functionality to handle
malformed packets. Also payload marker is not mandatory in CoAP
packets when there is no payload. Exit gracefully when CoAP
packet contains only options.
Fixes#4396.
Coverity-ID: 178060
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We need to skip protocol headers when setting pointer to
application data when receiving TLS data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled CONFIG_NET_DEBUG_APP, then the debugging
version of _net_app_select_net_ctx() was not properly declared
and it caused compile error.
Fixes#4481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a neighbor solicitation which does not have any
options, then there is no need to assert this condition as that
is a perfectly valid use case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IEEE 802.15.4 reassembly function ieee802154_reassemble() returns
anything other than NET_CONTINUE, then drop that packet. Earlier
it only dropped the packet if NET_DROP was returned but the reassembly
might also return NET_OK. In that case the pkt is freed already and
pkt->frags pointer is NULL. This caused NULL pointer access in L2 when
packet was received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This is similar to how few commands already behave if they can
provide additional info to the user if particular config options
are enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_pkt_tcp_data() and net_pkt_udp_data() simply returns the start
address of the header. However the header may span over multiple
fragments, unexpected data or memory corruption might happen when
reading or writing to the pointer directly.
Use net_tcp_get_hdr() and net_udp_get_hdr() instead.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
The net_tcp_get/set_hdr() and net_udp_get/set_hdr() documentation
was not clear in corresponding header file. Clarify how the return
value of the function is supposed to be used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
udp.h is out-of-date as it accesses net buf directly. In 3604c391, it
has been replaced by net/udp.h and udp_internal.h
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Previously net_pkt.h, defined macros NET_PKT_TX_SLAB_DEFINE,
NET_PKT_DATA_POOL_DEFINE, but advertised them as intended for
"user specified data". However, net_pkt.c effectively used the
same parameters for slabs/pools, but this wasn't obvious due
to extra config param redirection. So, make following changes:
1. Rename NET_PKT_TX_SLAB_DEFINE() to NET_PKT_SLAB_DEFINE()
as nothing in its definition is TX-specific.
2. Remove extra indirection for config params, and use
NET_PKT_SLAB_DEFINE and NET_PKT_DATA_POOL_DEFINE to define
system pools.
3. Update docstrings for NET_PKT_SLAB_DEFINE and
NET_PKT_DATA_POOL_DEFINE.
Overall, this change removes vail of magic in the definition of
system pkt slabs/pools, making obvious the fact that any packet
slabs/pools - whether default system or additional, custom - are
defined in exactly the same manner (and thus work in the same manner
too).
Fixes#4327
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When hexdumping the packet, print also information if we
received / transmitted packet. Also print information if the
hexdump is before compression or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If building a server that does not support TCP, then the
get_server_ctx() is not needed and thus needs to be compiled out.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Explicitly note that while these functions return pointers to
headers, the headers themselves may be fragmented into different
data fragments. 1a2f24f920 is an example where this might have
been overlooked.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Don't use names like "strlen" for parameters. Try and name buffer
parameters consistently.
NOTE: For several functions I removed "const" flag. This is
intentional and will be needed in upcoming patches.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Remove some left over TODOs and also fix a TODO where we need to return
the appropriate error code to generate a 4.05 response.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This calculation reads the length portion of the COAP header to determine
the length of the coap packet. However, when encrypted via DTLS this
value seems to be getting corrupted. Let's change this calculation so
that it will work for when DTLS is both enabled and disabled. Use the
total length of the fragment data and substract back out the headers
to get a correct value.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When source address is unspecified then SAC is 1 and SAM is 00.
Uncompression does not process because context based compression
is not enabled.
Special case (SAC:1 and SAM:00) should be handled without context
based compression support.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add system workqueue information prints to "net stacks" command.
This helps debugging when figuring out which stack is running out
of space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enhance existing "net app" command so that it can be
used to show information about multiple connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we get MAC verification error in handshake, it could be that
everything is fine but we ran out of heap memory in mbedtls.
In this happens, suggest the user to check amount of memory
in mbedtls as it might just fix the issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we select net_ctx, it is useful to see who actually called
the _net_app_select_net_ctx() when debugging the call flow.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sometimes when sending network packet, the wrong net_context was
selected which prevented data to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should not close the TLS connection immediately if the TLS
data is not yet sent. So if user calls net_app_close() and we
still have data pending, then send the TLS data and only after
that close the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As there can be multiple listening network contexts, it should
be possible to close one of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server is able to listen and serve multiple incoming
connections. This commit does not add support for multiple
incoming TLS connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The stack of rd client is exhausted while running lwm2m client w/ IPv6
and network log global enabled. Increase the stack size to 1536 when
NET_LOG_GLOBAL is enabled.
Detail described at #4424
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
".well-known/core" is mainly used with method GET for performing the
resource discovery (RFC 6690). Since we are implementing a LwM2M client
and is not implement a resource directory which allow others to do the
resource registration (POST to .well-known/core). Only GET method is
allowed for the usage. Report 4.5 (Method Not Allowed) if other methods
are requested.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Modify zoap_options_to_path() to return error when URI contains
character other than digits and return 4.04 NOT FOUND to caller.
PATH such as "/1a/2/3" was treated as "/1/2/3" after parsring
which is incorrect.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Return 4.05 Method Not Allowed when path is empty ('/') to the
caller for it's only use by bootstrap delete. This change also avoid the
empty path being treated as request targeted at 0/0/0.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1) Respond NOT FOUND to caller when object doesn't exist
2) Report as internal server error when OP not handled
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Such option should be use carefully. Printing out in/out packets is
extremely verbose.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the pkt is corrupted and the offset would be larger than
the actual packet length, then print information about that and
drop the packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Applications may want to be notified when various events
happen in the LwM2M rd client. Let's implement an event
callback which sends: connect, disconnect and update events.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
CoAP allows a proxy to be used when transferring data (CoAP-CoAP and/or
CoAP-HTTP) by creating request on a specific URI path and by using the
Proxy URI CoAP option. Create specific Kconfig options for the proxy
server address and port, until a parser gets implemented.
Code tested with Californium acting as CoAP proxy.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
[michael.scott@linaro.org: rebased on net_app + lwm2m_message
refactoring + firmware update changes.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
During firmware download via block-wise transfer, we can see
packets occaionally get re-transmitted (normal logic in the
pending / retry functions). However, both of these packets
end up coming through the reply handler and we should ignore
any block-wise transfer that has a current value less than
where we expect to be.
NOTE: This fixes K64F ethernet transfers where we were getting
too many packets back in the handler.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
UDP packets can be lost in heavy traffic. Normally we can handle this
with pending packet processing for packets which have not been responded
to with an ACK. However, due to the time it takes for firmware to
download via CoAP, an extra level of retries should be added.
The process works like this:
Normal pending packets will try to send 3 times fairly quickly.
If that fails, then the timeout callback is called for the firmware
download process. A retry counter is incremented and the timeout
callback perform a new packet send of the block-wise transfer
packet that is missing, until the retry counter hits a limit (3)
and then the transfer is aborted.
This allows for a longer "outage" to happen during firmware transfer
and the process can still succeed.
NOTE: This patch does not fix a current bug where the pending process
is not re-sending the packets correctly, it only makes the process
more stable with a better chance to work.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When a packet expires after the pending retries we call
lwm2m_release_message() to free up resources. This includes
cleanup of the pending structure which calls net_pkt_unref on
the pending packet. This would normally free up the packet
memory. However, earlier in the pending processing we add a ref
to the packet so that normal send processing doesn't free up
the memory. This meant we were leaking packet memory every
time we had an expiration due to timeout.
Let's do an unref prior to calling lwm2m_release_message() to
make sure the packet memory is freed correctly.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Previously, firmware support wasn't initializing the retransmit work
or the extra network packet pools. Let's fix that.
NOTE: While this fixes the setup of retransmit work, the actual
attempts to re-send packets which are pending is failing. Needs
another follow-up fix.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Create an internal function lwm2m_engine_context_init() which sets
the extra packet pools and initializes retransmit work internal to
the LwM2M engine.
This function will be used by firmware pull support which establishes
a new LwM2M context for downloading firmware.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In the case of a proxy server translating HTTP -> COAP (known in
the code as "separate reply"), we were leaking lwm2m_message structures.
This was due to pending objects being cleared out during the first ACK,
and no other way of finding a matching message when the follow up packet
was received. Let's add a second match for reply to make sure we can
find our matching message resources.
NOTE: This change renames find_msg_from_pending() to find_msg() and
makes it a static function as it's only used by the lwm2m_engine.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This is a useful message announcing that the RD client state machine
is starting for a particular connection. If the log level is set
low so that DBG messages are hidden, then this message goes away.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
1. Add handling block1 option in handle_request(). The basic idea is
to declare structure block_context at compiled time and use "token"
as a key to pick up the on-going block cotext. It should be able to
support multiple blockwise transfer concurrently
2. Use write callback implemented in lwm2m_obj_firmware to deal w/ the
update state transition and than call the callback registered by the
application
3. move default_block_size to lwm2m_engine.c to share between
lwm2m_engine and lwm2m_obj_firmware_pull
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on LwM2M net_app changes.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
OPAQUE resource type might/might not have data_ptr/data_len setup
depending on the implementation. This introduce an issue that when
OPAQUE resource is written from the server side, the ones w/ none
setup will not be able to get the data at post_write_cb()
Modify to setup data_ptr/data_len as incoming buffer and buffer size
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1. Parse firmware pull URI
2. Add lwm2m_firmware_get/set_update_cb() for application to register
callback. This is because we want to check the update_state before
we pass to the application
3. Add lwm2m_firmware_get/set_update_result() and
lwm2m_firmware_get/set_update_stat() to manage the state transition
as well as the sanity check
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on net_app framework and
lwm2m_message refactoring.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With future patches we will need to parse URLs in the registration
client and firmware object. Enable it by default when LWM2M is
enabled.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If there is no connection to server, then _net_app_select_net_ctx()
will return NULL. This is perfectly fine and we can just continue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the remote address to determine what address family to bind.
This prevents extra context to be created. In order to avoid
parsing the peer address string multiple times, the client
init function is re-factored.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some doxygen directives were missing from dns_pack.h file.
Also make function header documentation look better.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This creates mDNS responder and serves configured IP addresses
to the callers which want to resolve .local addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can configure hostname of the device in Kconfig. This can
be used by mDNS responder to answer <hostname>.local queries.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context_sendto() returns an error if dest address is NULL.
If dest address is available, net_conext_sendto() should be used.
Otherwise, net_context_send() should be used.
Fixes#4347
Signed-off-by: Aska Wu <aska.wu@linaro.org>
With the introduction of CoAP and other protocols, URL parsing is
be needed when HTTP_PARSER is not. Let's split out the existing
functionality of URL parsing into it's own CONFIG and let
HTTP_PARSER use it by automatically selecting HTTP_PARSER_URL when
HTTP_PARSER is enabled.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When CONFIG_STDOUT_CONSOLE is not selected, there is no printk()
function. An alternative (printf) must be used.
This fix was taken from tests/crypto/mbedtls/src/mbedtls.c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
It's possible to get number of free pkts/buffers with just
CONFIG_NET_BUF_POOL_USAGE, whereas CONFIG_NET_DEBUG_NET_PKT
depends on CONFIG_NET_LOG and adds quite a bunch of other
overhead. Also, give a hint that this option should be enabled
to get free buffer numbers.
Additionally, use unambiguous "Total" wording to represend the
maximum capacity of data structures, instead of previous "Count".
"Count" (or at least counter) is intuitively something which can
change, so not seeing any other numbers, it's very easy to assume
that it's actually number of free buffers (because that's the
information a user may be interested in in many cases).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the caller has passed net_pkt to prepare_segment(), then
it is caller responsibility to unref it in a case of error.
Fixes#4292
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some chips are smart enough to handle the ACK request flag on
transmitted frames, so it's unneccessary for the L2 to wait for it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is both required in L2's radio part as well as it might be useful
on some ieee802154 radio drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These are now fully replaced by set_filter() thus removing their usage
by the L2 layer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the hw supports filtering, L2 will apply the ieee address, short
address or PAN ID filters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using radio's get_capabilities, it is possible to know if the driver can
get CSMA work handed-over.
For now, up to device drivers to use
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_* parameters.
Let's see if it will be interesting at some point to enable runtime
modification of these parameters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of hard coded 1280 bytes MSS, use the MTU of the link
for MSS. The minimal MSS is still 1280 which is mandated by
IPv6 RFC.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding net_mgmt_event_notify_with_info() which lets the event notifier
to pass dedicated data along with the event. The size of data that can
be passed must be limited to the biggest data passed (which will be
currently IPv6 + prefix).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current coap library fails to parse or prepare if packet is more
than one fragment. Added support to handle multi fragment packet.
Also well-known/core api used to prepare coap packet and send it
through net context api immediately. This is goind to be problematic
if user doesn't enable net context. Also user can not encrypt coap
packets. Now api will return prepared coap packet to application.
Application will send it to peer.
Jira: ZEP-2210
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ZOAP library has certain limitations in parsing and preparation of
coap messages. It can handle only on single network fragment. If
network packet is split between multiple fragments it fails. This
patch is just copy and rename of 'zoap' to 'coap'.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
802.15.4 IP-based networking requires 6LoWPAN layer and won't work
correctly without it. So, if NET_L2_IEEE802154 is select,
automatically select NET_6LO. This is similar to what BLE L2
does (NET_L2_BT causes selection of NET_6LO).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is similar to the changes made previously to other network
components: if user selected NET_LOG_GLOBAL, they really mean
they want logging (first of all, error/warning logging) across
the entire network stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Due to timeout checking the minimum lifetime must be 15 seconds,
and we're storing the lifetime as an unsigned short so set the
maximum to 65535.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Callbacks are setup for the following states:
- ENGINE_DO_BOOTSTRAP
- ENGINE_DO_REGISTRATION (first registration)
- ENGINE_REGISTRATION_DONE (subsequent client updates)
- ENGINE_DEREGISTER
In most cases, if a timeout occurs the registration engine goes back to
ENGINE_INIT. The exception is a timeout during client update, which
forces the state machine back to ENGINE_DO_REGISTRATION (skipping a
boostrap).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Sending an lwm2m message is too difficult. It requires pending / reply
and other structures to be configured and set by various portions of
the library. There is also no way to know if a pending message ever
encounters a timeout.
Let's fix this by simplifying the internal LwM2M engine APIs for
handling lwm2m messages:
1. A user calls lwm2m_get_message(lwm2m_ctx) which returns the first
available lwm2m message from an array of messages
(total # of messages is set via CONFIG_LWM2M_ENGINE_MAX_MESSAGES).
2. Next the user sets all of the fields in the message that are
required (type, code message id, token, etc)
3. Then the user calls lwm2m_init_message(msg). This initializes the
underlying zoap_packet, pending and reply structures.
4. Once initialized, the user creates their payload in msg->zpkt.
5. When the user is ready to send, the call lwm2m_send_message(msg).
6. And if for some reason an error occurs at any point, they can free
up the entire set of structures with: lwm2m_release_message(msg).
Included in the refactoring is a timeout_cb field which can be set in
the LwM2M messages. If a pending structure ever expires the engine
will call the timeout_cb passing in the msg structure before it's
automatically released.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead of using a magic reference to 8 for token length, let's
establish a define for MAX_TOKEN_LENGTH and then use it for both
variable definitions and to make sure tokens are valid. Also,
Correct the handling of a special token length value (0xFF) which
lets lwm2m_init_message() know to skip token generation. We were
using a -1 value here previously (on a u8_t variable).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When the net-shell needs to send something to network interface,
it will check if the target address is found in neighbor cache and
then use that network interface. If the address is not found in nbr
cache, then the default interface is used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some our Zephyr tools don't like seeing UTF-8 characters, as reported in
issue #4131) so a quick scan and replace for UTF-8 characters in .rst,
.h, and Kconfig files using "file --mime-encoding" (excluding the /ext
folders) finds these files to tweak.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
send()/sendto() aren't "front facing" functions, so when user calls
them, context type hopefully should be already validated by other
functions. They are also on critical path of app/network performance,
so getting rid of extra check helps a little bit too. This also
fixes a warning of "err" possibly being used non-initialized.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The implementation is based on net app API. It sends the request and
parses the server reply by following some suggestions mentioned in the
secion "SNTP Server Operations" of RFC 4330.
The system uptime is used as the transmit timestamp of client request
This lib can work on those devices without RTC.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
sendto() and recvfrom() are often used with datagram socket.
sendto() is based on net_context_sendto() and recvfrom() is based on
zsock_recv() with parsing source address from the packet header.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
This patch makes net_context_sendto() work independently without calling
net_context_connect() first. It will bind default address and port if
necessary.
Also, since receive callback should be provided before sending data in
order to receive the response, bind default address and port to prevent
providing an unbound address and port to net_conn_register().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Introduce net_pkt_get_src_addr() as a helper function to get the source
address and port from the packet header.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Other parts of the networking subsystem may use net_pkt_ip_hdr_len() on
a packet that has been encrypted for use with DTLS. Let's restore that
value here so those areas don't receive an erroneous 0 value.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The IPv6 address parameters in net_ipv6_send_na() can be const
as the function will not modify them. This avoids compile warning
about parameter constness.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to return the neighbors in net_ipv6_nbr_foreach()
groupped by network interface. This way the caller has them
already in proper order and does not need to re-group them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There was no handler functions for adding, removing and looking up
IPv4 multicast addresses in the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user tried to bind to IPv4 multicast address, then the
operation failed and returned error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network interface does not support IPv4 like IEEE 802.15.4
or Bluetooth, then do not print IPv4 information for those interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the data parameter in net_pkt_insert() is NULL, then just
insert amount of data but clear the area instead of copying.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User was able to tweak IPv6 hop-limit so introduce similar
feature for IPv4 Time-To-Live value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the caller of http_client_send_req() sets the timeout to
K_NO_WAIT, then the function would still wait for a while before
returning to the caller.
Jira: ZEP-2624
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was accessing wrong neighbor data when it received DAO
message. This corrupted nbr->iface pointer which was clearly seen
by "net nbr" shell command. The corruption then caused random
crashes or hangs when network interface via that pointer was
accessed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the ethernet packet destination MAC address is NULL when sending
IPv4 multicast or broadcast packet, then we must set it as otherwise
we might to access NULL pointer data.
Fixes#1544
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds a new state NET_IPV6_NBR_STATE_STATIC which never timeouts
which is required in case of RFC 7668 which doesn't allow publishing
the address:
https://tools.ietf.org/html/rfc7668#section-3.2.3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In a case gateway is not set drop packet early otherwise bogus
ARPs for 0.0.0.0 are sent.
...
[net/arp] [DBG] find_entry: (0xa8006720): dst 0.0.0.0
[net/arp] [DBG] find_entry: (0xa8006720): [0] iface 0xa800cd80 dst
0.0.0.0 ll 00:00:00:00:00:00 pending 0xa800a7c0
[net/arp] [DBG] find_entry: (0xa8006720): ARP already pending to
0.0.0.0 ll 00:00:00:00:00:00
[net/arp] [DBG] net_arp_prepare: (0xa8006720): Resending ARP
0xa800a380
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If IPv6 is disabled, then it is useless to try to resolve
IPv6 address because "struct sockaddr" does not have enough
space to store IPv6 address.
Fixes#1487
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to clone just the net_pkt which does not have any
data fragments linked to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is useful to enable error/warning logging across the net
codebase (less useful for debug level logging, but that's true
for CONFIG_NET_LOG_GLOBAL already).
Implementation-wise, instead of keeping adding to long list of
"select"'s in CONFIG_NET_LOG_GLOBAL and thus introduce component
inter-dependencies, add "default y if NET_LOG_GLOBAL" to
individual components' logging options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
At the moment we print "Sending ARP packet" even if we found ARP entry
and send the packet directly.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is the first part of a large refactoring of LwM2M library
message functions and will simplify observer handling later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
All throughout the LwM2M library we use sockaddr values which are
basically the same as the net_app_ctx's remote addr. There's no
reason to keep these extra sockaddr values around. The net_app
framework client won't accept incoming requests on sockaddr other
than the one we're connected to.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This is the final stage of moving the LwM2M library internals to
the net_app APIs. This means we can support DTLS and other
built-in features in the future. All of the logic for
establishing the network connection is removed from the sample
app.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In preparation for the move to net_app APIs, we will need
to pass net_app_ctx structures around to the following
functions:
lwm2m_udp_sendto()
udp_request_handler()
Let's add the parameter as net_context for now so the
transition will be smoother later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This allows use to associate easily the replies / pending operations
with a specific network connection.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The LwM2M library does not use net_app APIs internally. To help
this effort let's establish a user facing structure "lwm2m_ctx"
(similar to http_client_ctx and mqtt_ctx) and start it off by
wrappering the net_context structure.
Future patches will add user setup options to this structure and
eventually remove the net_context structure in favor of a net_app_ctx.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If no gateway is set, an ARP request for 0.0.0.0 will be sent out,
which is confusing, so log as an error. Of course, logging will
happen only if enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The IPv4 multicast address to MAC address mapping was missing
the 4th byte high bit clearing.
We also need to have some storage for the multicast MAC address.
This was missing which could cause NULL pointer access.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements mDNS client from RFC 6762. What this means that
caller is able to resolve "hostname.local" names using multicast DNS.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes a tx_pkts slab leak since the cloned pkt was referencing the
original pkt slab but was not originated from it (net_pkt_unref uses
pkt->slab when releasing the pkt).
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Because a next networking API call will lead to a crash. Given that
logging can be easily disabled (disabled by default so far!), don't
be shy and call by the name (i.e. error).
Jira: ZEP-2105
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the IP address string is empty, then it is no use trying
to parse it. This was seen when handling DNS server strings when
user has made a mistake and defined the DNS server addresses
incorrectly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adjust length of the packet before setup_ipv4_header() which actually
might increase packet size if there is not enough space available.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Create support for registering a callback that will be called
if the device leaves or joins IPv6 multicast group.
Jira: ZEP-1673
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Commit cd35742a2 missed one unref too many on pending packet which was
triggering a crash which commit 0b8434f08 tried to fix, but it generates
a leak when there is not pending entries left in arp core. Finally,
fixing what cd35742a2 should have done: removing the extra unecessary
unref after sending the pending packet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Errors has been ignored when using TLV writer to create/write object
instance/resources. Modify to propagate the error back to the caller.
To reproduce the issue, try to create IPSO light control object
instances twice. Since the default instance count is 1, the second one
should be rejected and responded w/ error. But the current
implementation will respond w/ 2.04.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We did not check the requested object/object instance/resource exists or
not before we adding an observer. Correct it by checking the existence
first.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We should stop sending out notification to the peer when the
object/object instances requested to be observed is removed
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We were using sys_slist_remove() to remove object, object instance and
observer w/o passing the previous sys_snode_t to it (NULL).
This will instruct the function to treat the node as the list head and
result in unexpected behavior after the removal.
Correct it by using sys_slist_find_and_remove() or passing the previous
node to the function.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
When a request demands to create a new object instance, it will search
whether the request object instance exists or not. However, current
implementation does not reset the lwm2m_engine_obj_inst at the time it
is deleted. It only removes the object instance from the sys list.
Correct the behavior by resetting both object instance and resource
instances at the time it's deleted. Also, consolidate function
lwm2m_delete_handler() and lwm2m_delete_obj_inst().
To reproduce the issue, try to create light control object instance
(/3301), delete the created instance and create it again. You shall find
following error message dumped.
> [ipso_light_control] [ERR] light_control_create: Can not create
instance - already existing: 0
> [lib/lwm2m_engine] [ERR] lwm2m_create_obj_inst: unable to create obj -
3311 instance 0
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
If the packet is put pending because ARP request need to be
done, then do not unref original packet.
Fixes#1416
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a command "net arp" to net-shell. This new command will
print ARP cache contents if IPv4 and Ethernet are enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit 725be227 ("net/mgmt/event: Commands must be > 0 so
masking them works") prevented IPv6 address setting when an
application was initialized. The check in subsys/net/lib/app/init.c
needs to be adjusted because of that change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were bunch of config options in tests/net, net-shell and
wpan_serial sample, and those options had wrong name so they
were ignored by the code.
Fixes#1428
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When new connection is accepted, the TCP context variables like
sequence number etc. were not properly set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For IPv6 check_ip_addr in subsys/net/ip/net_core.c makes a
NET_DBG call to report when a net_pkt is missing a destination
address. An analogous NET_DBG call has been added to the IPv4
destination address checking.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
prepare_arp() was unreferencing original pkt (called pending there) in
case of error.
net_prepare_arp() was always unreferencing pkt, though it could have
been already unreferenced by prepare_arp() as seen previously which is
an extra bogus unref in this case.
And in case it returned NULL, ethernet_send() would return NET_DROP
which in turn would make net_if's tx code to unref again the pkt.
This patch ensures pkt is unrefed only once and at the right place.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The TCP state string is only printed if CONFIG_NET_DEBUG_TCP is
defined. If that is not the case, then the "net conn" command
should not print the "State" column name as the state will not
be printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit 817245c564.
In certain cases the peer seems to discard the FIN packet we are
sending, which means that the TCP stream is not closed properly.
This needs more work so revert this for time being.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When new socket context is created on accepting connection to a
listening socket, its recv_q FIFO should be initialized. Without
initialization, this worked by a chance when FIFO structure was
simple, but recent change to add dlist to it (which now needs
proper initialization) exposed this issue.
Jira: ZEP-2576
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the query name is already in numeric format, there is no
need to send the query string to DNS server as we can just
convert it ourselves.
Jira: ZEP-2562
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes IP address parsing from DNS init and
replaces it by call to net_ipaddr_parse().
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_ipaddr_parse() will take a string with optional port
number and convert its information into struct sockaddr.
The format of the IP string can be:
192.0.2.1:80
192.0.2.42
[2001:db8::1]:8080
[2001:db8::2]
2001:db::42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If network context is closed, send FIN by placing it to the end
of send queue instead of sending it immediately. This way all
pending data is sent before the connection is closed.
Jira: ZEP-1853
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TLS and DTLS are not related to each other so allow DTLS to be
enabled even if TLS is disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net app" command was accessing NULL pointer if TLS and UDP were
enabled but DTLS was not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier we modified the original pkt chain when creating IPv6
fragments. This is not a proper way as the original chain might
still be used in TCP when re-sending a message. So when fragmenting
the packet, clone it first and leave original packet intact. This
occupies litle more memory but is now safe.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is very unlikely to happen but the device will access null
pointer if we do not properly check the return value of header
check function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When trying to figure out where ICMP / TCP / UDP header is located
in net_buf, print more information about what we were doing if the
header cannot fit the first fragment. This is much needed infomation
in debugging weird issues.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using memcpy() to copy net_pkt is not safe because there are
pointers inside. So use the new net_pkt_clone() to do that.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is needed when one wants to copy the whole fragment chain
and its head pointer net_pkt.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP header was stripped by _net_app_ssl_mux() when it received
IP packet. This is fine but if the application expects the get
the IP header, then there is a problem. Fix this by saving IP
header to ssl_context and then putting it back in front of the
packet when the data is passed to application.
Note that this IP header is not used by net_app when the packet
is sent because TLS/DTLS creates a tunnel for transferring packets
and user can only sent packets via this tunnel.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_delayed_work_cancel now only fail if it hasn't been submitted which
means it is not in use anyway so it safe to reset its data regardless
of its return.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The original commit 8ebaf29927 ("net: http: dont timeout
on HTTP requests w/o body") was intended to handle a case
where an HTTP response had been retrieved from the server but
the HTTP parser couldn't meet the criteria for calling
"on_message_complete". For example, a POST to a REST API
where the server doesn't return anything but an HTTP
status code.
It was a really bad idea to check a semaphore count. There
is a lot of kernel logic built into semaphores and how the
count is adjusted. The assumption that the value is 0
after the k_sem_give() is incorrect. It's STILL 0 if
something is pending with a k_sem_take(). By the time
k_sem_give() is done executing the other thread has now
been kicked and the count is back to 0.
This caused the original check to always pass and in turn
breakage was noticed in the http_client sample.
Let's do this the right way by setting a flag when
on_message_complete is called and if that flag is not set
by the time we reach recv_cb, let's give back the semaphore
to avoid a timeout.
Jira: ZEP-2561
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The HTTP header field pointers are saved for each HTTP request.
But the counter that saves the pointers was never reset to initial
value when the connection was dropped. This meant that the header
field values were only proper for first HTTP request.
Jira: ZEP-2463
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server needs global enable/disable status instead of only being
able to enable or disable just the TLS server part.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have specified AF_UNSPEC when initializing application
server local address, then we try to bind to both IPv4 and IPv6
addresses. The old code did not honor the port number in this
case but used some random value for port.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has specified a specific local address, then honor that
and do not try to bind IPv4 context if only IPv6 is defined,
and vice versa for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zeroing-out all bytes from a connection structure when it's
unregistered ensures all state from a previous connection is gone and
can't be mistakenly reused.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If either a remote or a local address were supplied to the
net_conn_register() function, the IP stack would proceed to copy
sizeof(struct sockaddr) bytes from the respective remote_addr
or local_addr pointers, regardless of the actual size of the storage
these pointers point to.
Use the proper size depending on the socket address family.
Coverity-ID: 173630
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If CONFIG_NET_DEBUG_APP was defined, but neither NET_APP_SERVER nor
NET_APP_CLIENT, build failed due to net_app_cb() haven't beeen
defined. So, define it to empty in this case.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Setting just IPv4 address as was allowed before isn't enough for
real-world usage (e.g. accessing DNS and outside servers in general).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per LwM2M spec (7.3.2.4 Operation on Object):
"If the payload (New Value) conveys an Object Instance ID in conflict
with one already present in the LwM2M Client, the complete request
MUST be rejected and a "Bad Request" error code MUST be sent back."
Let's do that.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Per LwM2M specification 7.3.2.4, "Optional Resources MAY be conveyed
in the "New Value" parameter as well; the LwM2M Client MAY ignore the
optional resources it doesn't support."
Update TLV/JSON writer to ignore error when object fields are not
found (treated as optional resource). This will allow the resources
supported being written.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: re-worked patch post addition of CREATE
operation.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Prior to this patch, a CREATE operation was handled as a WRITE operation
after the object instance was created. This becomes problematic when
handling of optional resources differs between these 2 operations.
Let's introduce an actual CREATE operation and use it later to create
these differences.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
We are returning EINVAL from content format write ops when an object
field definition is not found (an optional field which is not
implemented). Instead, return ENOENT which lets the LwM2M engine
know to send ZOAP_RESPONSE_CODE_NOT_FOUND to the LwM2M server at the
end of handle_request().
NOTE: This behavior is not correct when we call the writer right after
a CREATE operation where the data is assigned to resources for the
first time. This case will be handled in a follow-up patch once we're
able to distinguish between a WRITE and a CREATE in the write op
handler.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_pkt_get_reserve_data ignores the timeout parameter when in isr,
using K_NO_WAIT instead, which can lead to invalid fragment.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Per LwM2M specification 5.3.1 Register, report "ct=11543" when JSON is
supported. Also, report the resource type as rt="oma.lwm2m" when "ct="
presents.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Per LwM2M specification 5.3.1 Register. When object instances are
available, object ID can be ignored in registration message
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification 5.2.7.3 Bootstrap DISOCVER,
security object is only reported to the bootstrap server.
Correct the behavior to (1) report server object to the server
(2) do not report security object at registration time
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This is how it's called in the main docs, so use this same phrase in
Kconfig and samples too.
Also, added some articles to docs.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This option enables full debugging output for memory allocations.
As that can produce lot of output and slow down the device under test,
it is disabled by default.
The previous CONFIG_NET_DEBUG_NET_PKT will collect information about
memory allocations but will not print any output. Use "net mem" or
"net allocs" commands in net-shell to see the memory allocation status.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because the name of the memory pool can be quite long, print
it last so that the columns get aligned nicely.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are not in ESTABLISHED state, then there is no need to
try to resend any pending data packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the expire send timer expires, then it sends the packet.
If that happens, then we must not try to send the same packet
again if we receive ACK etc. which can cause re-sends to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the packet sending is slow then we must NOT increment the ref
count when re-sending it. This is unlikely but can happen if there
are lot of debug prints etc. extra activities that prevent the driver
to actually send the packet fast enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the sent flag is only set after we have really
sent the packet and the driver has verified that.
If the net_pkt_set_sent() is called while still in tcp.c, then
depending on how fast the device is, it might happen that the
retry timer expires before the packet is actually sent. This was
seen in frdm-k64f with ethernet and various debug prints activated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is a backlog entry when TCP context is released, then
cancel the ACK timer if one exists.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that a network packet is sent after calling
http_response_send_data(). Othwerwise the packets might be
piling up and not sent in timely manner.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some older C libraries do not have errno for EPFNOSUPPORT.
Fixes issues with newlib in some versions of Xtensa XCC compiler.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The initial function prototype did not have 'inline' in it,
resulting in a compiler warning with XCC.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's never a good idea to redefine functions as macros if intended
to be unused in some configuration
- "statement with no effect" warnings
- "unused argument" warnings
- No type checking done if the macros are used
These have been redefined as empty inline functions.
Fixes compiler warnings with XCC.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The second 'const' is misguided, indicating that the returns pointer
value itself cannot be changed, but since pointers are passed by value
anyway this is not useful and was generating warnings with XCC.
The leading 'const' indicates that the memory pointed to is constant,
which is all we needed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Inline functions declared in header files need to be declared
static. Fixes a compiler warning with XCC compiler.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently, the HTTP_NETWORK_TIMEOUT setting is hard-coded as 20 seconds.
Not every application may want to wait that long, so let's change this
to a CONFIG option: CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT
NOTE: This also removes HTTP_NETWORK_TIMEOUT from the public http.h
include file. It was not being used externally to HTTP client sources.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
A TCP FIN message is passed on to user apps as a tcp_received_callback
with a NULL pkt parameter. This means the connection is closing and
the app should do whatever cleanup it needs as there will be no further
callbacks for the current TCP connection.
Currently, if a HTTP client request doesn't receive a "body" which
the HTTP parser can use to trigger on_message_complete, then the request
will end up timing out and most apps will think an error has occurred.
Instead, let's handle the TCP FIN message and return the waiting
semaphore, leaving the app to deal with whatever has been set in the
current HTTP context response data (IE: http_status).
This fixes using HTTP client to send POST data to servers which
only respond with HTTP_OK status and no body.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
"Network Application Support" itself is renamed from "Network
Applications" and also includes net_app API.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is needed in order to get information which function is
doing the ref. With inline function this was not possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of printing [net/net_pkt], print [net/pkt] if debug log
is enabled for network packet allocator. The double net in earlier
print is redundant information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always have CONFIG_NET_IPV6_MAX_NEIGHBORS parents,
use CONFIG_NET_RPL_MAX_PARENTS when creating the parent table.
Default value for max parents is the max neighbors so no
functionality changes are introduced here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always having CONFIG_NET_IPV6_MAX_NEIGHBORS number
of items in neighbor pool, store the neighbor count in the pool
and use that value when traversing the neighbor table.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to define what kind of network the RPL should serve.
Currently options will be either ANY or IEEE802154. If there
is only one network interface in the system, then ANY will take
the default network interface and use that. If there are multiple
network interfaces, then one should not use ANY as the default
network interface might not be the expected one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print network interface where the DIO, DIS or DAO was sent. This is
useful if we have multiple network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When printing network interface specific data, print also
the type of the network interface (ethernet, bluetooth etc).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user has not specified CONFIG_NET_APP_MY_IPV4_ADDR or
CONFIG_NET_APP_MY_IPV6_ADDR, the value is set to "" in this case.
This will be converted to ANY IP address which is not useful
to be set to the network interface. So check this and just
continue the init in this case without setting the IP address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The documentation says that the API will automatically append the
net_buf fragment to the end of network packet fragment chain.
This was not the case and current only user for this API in
echo-server sample appended the fragment itself. The fix is to
automatically append the fragment to the end of fragment chain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. According to the specification 5.3.1, it's a MUST to specify
(1) content format: app link format (2) supported lwm2m version.
Also, we should use text/plain instead of LWM2M's (obsolete).
2. Use LWM2M_FORMAT_OMA_TLV as default accept format when accept option
is not given from the caller for TLV is a MUST have in LwM2M spec and
it can deals w/ multiple resources read
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Save in observe_node_data so that later on we can select the correct
content format requested by the caller at the first time
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Function do_write_op_tlv() uses in->inbuf and in->insize as a looping
condition to iterate through items in TLV payload and call
do_write_op_tlv_item() to update the value.
However, do_write_op_tlv_item() will override the value before calling
for fitting the usage of lwm2m_write_handler() function without restore
them. (lwm2m_write_handler() is also called by plain text/json writer
and is expecting in->inbuf is the start of buffer and in->insize as the
length of the buffer)
This will result in errors in do_write_op_tlv().
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
RFC-7230 "HTTP/1.1 Message Syntax and Routing" Section 5.4
describes the "Host" header formatting. If Zephyr user
specifies a host string as a part of the HTTP client request
structure, we end up sending an incorrect HTTP header due
to a missing "Host :" text.
Fix this by prepending "Host: " to the header data before
the user supplied host string.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
sprint_token is only used by SYS_LOG_DBG, so only build it when
CONFIG_SYS_LOG_LWM2M_LEVEL > 3.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Separate response can happen when handling block transfer for firmware
updates, and to avoid duplicating the lwm2m_udp_receive function, create
and additional flag to allow handling CoAP separate response messages.
This is required to avoid removing the reply callback, since a new
message (with a valid token) will be received later from the server.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Simplifly net_context_sendto calls and also allows to easily debug every
send/receive lwm2m call.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
If the device has multiple network interface, then we must not
blindly use the default one but get the IEEE 802.15.4 network
interface when setting radio parameters in the shell.
Jira: ZEP-2432
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print route information by groupping them for each network
interface like this:
IPv6 routes for interface 0xa8007140
====================================
IPv6 prefix : 2001:db8::212:4b00:0:3/128
neighbor : 0xa80065e0
link addr : 00:12:4B:00:00:00:00:03
IPv6 prefix : 2001:db8::212:4b00:0:1/128
neighbor : 0xa8006660
link addr : 00:12:4B:00:00:00:00:01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add "net rpl" command to net-shell which will return both static
RPL configuration from Kconfig, and dynamic run time configuration
of the nodes and parents.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_rpl_foreach_parent() function that will traverse
through all the parents and return their information via callback.
This is needed by net-shell in later commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If debug level was low but debugging was activated, then some
of the debug variables were left unused.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_rpl_repair_root() and net_rpl_set_root_with_version()
functions were static which prevented global repair when using
an instance id. Making those functions global allows RPL network
repairing from shell for example.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit b14586c3ca ("net: rpl: RPL route entry was fetched
too late") dropped the DAO packet too early which prevents the
RPL root node functionality. Rework the earlier commit so that
Coverity issues are fixed but the RPL DAO message is also properly
handled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
IPSO Smart Objects are a set of template objects based on the LwM2M
object framework which are designed to represent standard hardware
such as temperature and humidity sensors or light controls.
Let's add a place for these objects to live as well as an initial
temperature sensor object.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Origin: SICS-IoT / Contiki OS
URL: https://github.com/sics-iot/lwm2m-contiki/tree/lwm2m-standalone-dtls
commit: d07b0bcd77ec7e8b93787669507f3d86cfbea64a
Purpose: Introduction of LwM2M client library.
Maintained-by: Zephyr
Lightweight Machine-to-Machine (LwM2M) is a protocol stack extension
of the Constrained Application Protocol (CoAP) which uses UDP
transmission packets.
This library was based on source worked on by Joakim Eriksson,
Niclas Finne and Joel Hoglund which was adopted by Contiki and then
later revamped to work as a stand-alone library.
A VERY high level summary of the changes made:
- [ALL] sources were re-formatted to Zephyr coding standards
- [engine] The engine portion was re-written due to the heavy reliance
on ER-CoAP APIs which are not compatible to the Zephyr CoAP APIs as
well as other Zephyr specific needs.
- [engine] All LWM2M/IPSO object data is now abstracted into resource
data which stores information like the data type, length, callbacks
to help with read/write. The engine modifies this data directly (or
makes callbacks) instead of all of the logic for this living in each
object's code. (This wasn't scaling well as I was implementing
changes).
- [engine] Related to the above change, I also added a generic set of
getter/setter functions that user applications can call to change
the object data instead of having to add getter/setting methods in
each object.
- [engine] The original sources shared the engine's context structure
quite extensively causing a problem with portability. I broke up the
context into it's individual parts: LWM2M path data, input data and
output data and pass only the needed data into each set of APIs.
- [content format read/writer] sources were re-organized into single
.c/h files per content formatter.
- [content format read/writer] sources were re-written where necessary
to remove the sharing of the lwm2m engine's context and instead only
requires the path and input or output data specific to it's
function.
- [LwM2M objects] re-written using the new engine's abstractions
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In the 08 Feb 2017 V1.0 LwM2M specification page 80 mentions: in
response to a "Notify" operation for which it is not interested in
any more, the LwM2M Server can send a "Reset Message".
Leshan server sends this CoAP RST response and it does not contain
the originating message token (which is also how the packet flow looks
on page 81 of the LwM2M spec). Using the current ZoAP sources, the
client has no way of matching back to observation which needs to be
cancelled.
Let's add a match for message ID of a reply where there is no token
to handle this case.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
[ricardo.salveti@linaro.org: Handle both piggybackend and separate
response (id doesn't need to match, only token).]
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
For an accepted socket, we should set our receive callback and start
to queue packets ASAP (in the accept callback itself). Otherwise,
(if done in accept() call like before) we may miss to queue some
packets.
This issue wasn't exposed with slow SLIP and with emulated QEMU, but
easily exposed with Ethernet on a real hardware.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We need to define __LINUX_ERRNO_EXTENSIONS__ if newlib is being
used otherwise there is a compile error about ESHUTDOWN errno
value missing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Fix typo'd "&&" when checking bit value
- Don't use NET_EVENT_IPV6_ADDR_ADD for checking mask value
due to combination of bits: _NET_EVENT_IPV6_BASE |
NET_EVENT_IPV6_CMD_ADDR_ADD
Instead use NET_EVENT_IPV6_CMD_ADDR_ADD so the check works
when NET_EVENT_IPV6_ROUTER_ADD is enabled.
Tested fix with echo_server on x86 qemu where it was previously
broken.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Unlikely to happen but make sure parent neighbor exists when
probing it.
Coverity-CID: 173635
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no parent found with a specific dag, then we have
to check this in order not to access NULL pointer.
Coverity-CID: 173637
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the parent is not found when adding DAG, then just return.
We must check the parent pointer as it can be NULL.
Coverity-CID: 173638
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to complex overflow checks that are error prone.
Coverity complained that the original diff check was always
false.
Coverity-CID: 173639
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There was dead code when handling IPv6 Hop-by-hop option.
The extra option value check can be removed as it is useless.
Coverity-CID: 173642
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Coverity complains about non-checked return values here. This is false
positive as the return values do not need checking in this special
case because we are closing the socket.
Coverity-CID: 173646
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Coverity complains about reversed src and dst fields when sending
DAO ack back to originator. This is false positive.
Coverity-CID: 173650
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check the return value of k_poll() as instructed by Coverity.
If debugging is enabled we print error if this happens, otherwise
this error is ignored. In our case the return value should always
be 0.
Coverity-CID: 173652
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is be possible that the local address was not properly
resolved in which case the local_addr variable could be NULL.
This will cause NULL pointer access if the variable is used.
Coverity-CID: 173656
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The RPL route entry variable "extra" was resolved inside an
if-statement and the code was always returning from it.
This meant the the later code dealing with "extra" was never
executed. Fixed by moving the resolving of "extra" a bit
earlier so that the "extra" variable has always a proper value.
Coverity-CID: 173659
Coverity-CID: 173654
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TX send function will return status < 0 if there is an error
when sending. This status value was incorrectly checked.
Coverity-CID: 173660
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we buffer incoming packets in receive callbacks, we must decrease
receive window to avoid situation that incoming stream for one socket
uses up all buffers in the system and causes deadlock. Once user app
consumes queued data using recv() call, we increase window again.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This fixes the existing situation that "if application buffers data,
it's the problem of application". It's actually the problem of the
stack, as it doesn't allow application to control receive window,
and without this control, any buffer will overflow, peer packets
will be dropped, peer won't receive acks for them, and will employ
exponential backoff, the connection will crawl to a halt.
This patch adds net_context_tcp_recved() function which an
application must explicitly call when it *processes* data, to
advance receive window.
Jira: ZEP-1999
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This enables IPSP node role which requires IPSS GATT service to be
registered.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_REQUEST_BT_ADVERTISE which can be used to advertise
IPSS service so the remote devices can connect to it.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some network interfaces such as bluetooth 6lowpan can start without
an assigned IP address and then later once the connection is up a
router advertisement broadcast will assign the IP address.
The net_app framework will timeout out during network init if a value
cannot be parsed from CONFIG_NET_APP_MY_IPV6_ADDR. Let's adjust
the framework to handle a missing value there and fill it in later
when the IPv6 address is added to the interface.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A new net-shell command "net app" will print information about
network app users in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add API that allows net-shell to get net_app context information
that can be used to debug net_app connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds http_client_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For IPv6 header compressed packet, the IP header offsets will
be wrong. In this case there is no need to print error when
trying to print TCP packet information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds http_server_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_MQTT_LIB_TLS is introduced to enable TLS support.
Also, prj_frdm_k64f_tls.conf is added to demostrate the whole idea.
jira:ZEP-2261
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
As SLIP TAP is now the default after the commit ca0ad13a61
("net: enable SLIP only on QEMU targets"), clarify the comments
and settings in various Kconfig files that talk about slip.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change the common "init with 0" + "give" idiom to "init with 1". This
won't change the behavior or performance, but should decrease the size
ever so slightly.
This change has been performed mechanically with the following
Coccinelle script:
@@
expression SEM;
expression LIMIT;
expression TIMEOUT;
@@
- k_sem_init(SEM, 0, LIMIT);
- k_sem_give(SEM);
+ k_sem_init(SEM, 1, LIMIT);
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If the network interface is down, then IPv6 DAD (Duplicate
Address Detection) cannot be done if new IPv6 address is added
to the network interface. This can happen in Bluetooth, where
network interface is taken up only after there is a BT connection.
The DAD is delayed and done later after the network interface is up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Normally network interface is always UP, but Bluetooth
interfaces are down until connected. So if this is the case,
then check the interface status before trying to access variables
that are NULL. This was seen with "net iface" shell command when
BT was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case the application is using NET_L2_BLUETOOTH the SLIP drivr shall
not be selected as bus they cannot coexist since they use the same UART
port:
arch/x86/soc/ia32/Kconfig.defconfig:
config BLUETOOTH_UART_ON_DEV_NAME
default "UART_1"
config UART_PIPE_ON_DEV_NAME
default "UART_1"
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In many networking tests we had to configure SLIP in the prj.conf
leaving those configurations Qemu specific. This change enables SLIP for
QEMU targets automatically and allows reuse of prj.conf for multiple
boards.
Additionally, the TUN options is removed. This option was not used
anywhere.
To enable self-contained networking tests that do not depend on SLIP, we
introduce the new option NET_TEST which disables TAP and allows testing
in QEMU without the need for a host interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
* Fix the indentation which was caused by uint32_t -> u8_t changes.
* Make sure there is no unused variable warning if debugging is
enabled but debug level is low.
* Add assert that checks that Imax_abs is > 0 which it should be.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there are no neighbors or there is no route to one specific
neighbor, then check the NULL pointer before accessing the route.
This issue was seen with "net route" shell command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_stack_analyze function wants to look at the stack buffer,
but it is making assumptions on where this data is that are no
longer valid. Change to use the proper APIs for referencing this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If IEEE 802.15.4 is enabled, then setup the network settings
automatically so that the device is ready for IP configuration.
This is only done if CONFIG_NET_APP_AUTO_INIT is enabled, which
is currently the default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The address lifetime timer was cancelled always even if the address
timer was never installed.
Jira: ZEP-2397
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
poll() allows to (efficiently) wait for available data on sockets,
and is essential operation for working with non-blocking sockets.
This is initial, very basic implementation, effectively supporting
just POLLIN operation. (POLLOUT implementation is dummy - it's
assumed that socket is always writable, as there's currently no
reasonable way to test that.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use net_context_put(), not net_context_unref(). This makes sure
that after sending response, connections are properly closed.
Jira: ZEP-2362
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Introduce net_context_bind_default() to ensure that local address is
set for context if not yet (via explict bind() call). This fixes
dereferences of NULL pointer to local address which was exposed when
MMU was enabled for qemu_x86.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
According to RFC7959 page 30, "The end of a block-wise transfer is
governed by the M bits in the Block options, _not_ by exhausting the
size estimates exchanges."
Therefore, we should check the M bit instead of total size (which
is not always available, too)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
If either UDP or TCP is enabled but not both, then connectivity
fails. This was a side effect of commit 3604c391e ("net: udp:
Remove NET_UDP_HDR() macro and direct access to net_buf")
Jira: ZEP-2380
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When IPv6 fragments were sent, the last IPv6 fragmented packet
was accessing NULL pointer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When the ARP message is received when the device is starting up,
the network interface might not yet have IPv4 address setup
correctly. In this case, the IP address pointer could be NULL
and we must not use it for anything.
Fixes#752
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Coverity reported false positives, add comment about these in
the code.
Jira: ZEP-2344
Jira: ZEP-2345
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes a regression which the original patch introducing
this code (improving concurrent connection handling) had on
*sequential* connection handling. Without this patch, with the
default CONFIG_NET_TCP_BACKLOG_SIZE of 1, after each connection
request, there was 1s (ACK timeout) "dead time" during which new
connection wasn't ptocessed.
This is because k_delayed_work_remaining_get() was checked the
wrong way. But there's no need to use k_delayed_work_remaining_get()
at all, instead just call k_delayed_work_cancel() and dispatch on
its return code.
Note that there's still a problem of synchronizing access to
the global array tcp_backlog, as worker (which modifies it) may
preempt packet handling code (which also modifies it).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The sequence number validator was checking the seq numbers
incorrectly. This caused some valid RST packets to be dropped
and the TCP stream to hang.
Added also a TCP test case that tests the seq validator.
Jira: ZEP-2289
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Usually it is not enough to have just one IPv6 multicast
address defined for the network interface. So allocate three
IPv6 multicast addresses for the network interface as IPv6
by default uses multicast a lot. This hopefully will avoid
some mysterious errors if the addresses run out.
Note that this will increase memory usage a bit so you might
need to lower the count in your conf file if memory is low.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit 210c30805b ("net: context: Close connection fast
if TIME_WAIT support is off") was not a proper way of closing
the connection. So if Zephyr closes the connection (active close),
then send FIN and install a timer that makes sure that if the peer
FIN + ACK is lost, we close the connection properly after a timeout.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit 00ac0487b0 ("net: context: Remove tcp struct SYN-ACK
timer handling") removed also the passive close ACK timer.
Adding that ACK timer back so that we can close the connection
properly even if the last ACK from peer is lost.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This fixes coverity CID 171565 which may be valid in case of the
connection is not properly setup, or its memory is corrupted, it
may cause use of invalid addresses to be set using
net_if_set_link_addr.
JIRA: ZEP-2344
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the TCP data packet needs to be re-sent after the packet is lost,
then the acknowledgment number will be changed. This then means that
the TCP checksum needs to be recalculated too.
Signed-off-by: june li <junelizh@foxmail.com>
When a node receives consistent DIO messages with same data from
Border Router just ignore those messages. Need not to proceed
further.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Link metric is part IPv6 neighbour data struct. But RPL code is
trying to access it from RPL parent table where link metric doesn't
exist. So provided an api to get IPv6 neighbour data from RPL parent
data.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
DAG rank will be properly written with net_pkt_write_be16() in
network packet. API will take care of endianness. So need
not to convert it using htons().
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Sender rank (16 bit uint) was properly read with net_frag_read_be16()
api and need not to convert it again using ntohs().
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We had various asserts when checking network packet length but
printed also error when there was none. Fix this by checking
do we really have a too short message.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_TCP_HDR() macro as we cannot safely access TCP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the TCP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_ICMP_HDR() macro as we cannot safely access ICMP header
via it if the network packet header spans over multiple net_buf
fragments.
Jira: ZEP-2306
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 HBH option PAD1 ext header was not parsed properly
as the code read one extra byte from the ext header. The
PAD1 length is only 1 byte.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function that helps to figure out if the
protocol headers can be directly accessed when they fit one
net_buf fragment, or if they need to accessed using various
net_pkt helpers that know about reading data from two
different net_buf's.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of directly setting pointer to where to start to calculate
the various IP related checksums, use the net_frag_skip() to first
find out what is the fragment where the calculation should start.
This needs to be like this so that if the IP header + possible
extension are so long that they do not fit the first fragment,
we need to be prepared to look into second fragment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context_unref() is protocol agnostic, after being un-referenced,
the same context might end up being used then for UDP,
if context->tcp is not reset to NULL, calling net_context_unref()
after this UDP usage will again try to release this TCP pointer
which might lead to random error.
Signed-off-by: june li <junelizh@foxmail.com>
In some cases the lladdr might not be set, currently this is
seen with RPL unit tests, in which case we must not access
the lladdr.
Jira: ZEP-2330
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no route to the neighbor, then do not try to delete
it because the route pointer is NULL.
Jira: ZEP-2329
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SYN-ACK timer is now handled by the TCP backlog functionality,
while the remaining ACKs for established connections use the tcp
struct ack timer. With this, code setting tcp struct SYN-ACK state
timers can now be removed.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add timer for sent TCP SYN-ACKs. If the timer is already
scheduled to run before canceling it is attempted, set
the cancelled flag and let the callback remove the
delayed work.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add an array of configurable size that holds TCP backlog entries.
The array is shared between all incoming TCP connections in order
to make it possible to get away with less memory consumed than
with a connection based approach.
The backlog entries are created when a SYN is received for a
listening TCP socket and removed once the corresponding ACK is
seen. With an incoming RST the corresponding backlog entry is
cleared, if any.
The size of the global backlog array is defined with the
CONFIG_NET_TCP_BACKLOG_SIZE Kconfig variable.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
When neither IPv4 nor IPv6 are selected the limit that is
passed to k_sem_init will end up being 0, which will trigger
the folowing assertion in k_sem_init;
__ASSERT(limit != 0, "limit cannot be zero");
Fixed by not passing count as initial and limit value but
only as initial value and use UINT_MAX as limit.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
The network application API is a higher level API for creating
client and server type applications. Instead of applications
dealing with low level details, the network application API
provides services that most of the applications can use directly.
This commit removes the internal net_sample_*() API and converts
the existing users of it to use the new net_app API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ICMP packets do not fit in 1 net_pkt fragment the checksum
will be calculated incorrectly.
The problem shows up when using ping with the -s option to
create large ping requests. Eventhough the ping command does
accept the reply without complaining, Wireshark warns that
the icmp checksum is incorrect.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
If a socket is closed without reading all data from peer or accepting
all pending connection, they will be leaked. So, flush queues
explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
With CONFIG_NET_SOCKETS_POSIX_NAMES=y, "raw" POSIX names like
socket(), recv(), close() will be exposed (using macro defines).
The close() is the biggest culprit here, because in POSIX it
applies to any file descriptor, but in this implementation -
only to sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds Kconfig and build infrastructure and implements
zsock_socket() and zsock_close() functions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The global mbedtls heap is set automatically now so no need to
set it individually in the http library.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Three response codes are missed in zoap_header_get_code() which will
result in the response code returned from the function being set as
ZOAP_CODE_EMPTY. Check include/net/zoap.h for the missing code
definition.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
In LISTEN state ignore a TCP RST. In SYN RCVD state, reset TCP
connection state to LISTEN when a valid RST segment is received. In all
other states close the connection - except that these other states will
not be handled in tcp_syn_rcvd() function.
Jira: ZEP-2279
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
If the CONFIG_NET_TCP_TIME_WAIT support is disabled, then do not
start to wait for reply to sent FIN in active close, but unref
the corresponding net_context in order to close the connection
as soon as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The net_pkt_split() was incorrectly checking fragA pointer
even before it was allocated.
The unit test is fixed and converted to ztest.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
From
http://pubs.opengroup.org/onlinepubs/7908799/xns/netinetin.h.html:
in_addr_t
An unsigned integral type of exactly 32 bits.
[] the in_addr structure [] includes at least the following member:
in_addr_t s_addr
In other words, POSIX requires s_addr to be a single integer value,
whereas Zephyr defines it as an array, and then access as s_addr[0]
everywhere. Fix that by following POSIX definition, which helps to
port existing apps to Zephyr.
Jira: ZEP-2264
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we receive a HTTP request and if the earlier context is still
active and it is not the same as the new one, then close the earlier
one. Otherwise it is possible that the old context will be left into
TCP ESTABLISHED state and would never be released. Example of this
is that we had IPv4 connection active and then IPv6 connection is
established, in this case we will disconnect the IPv4 connection
after this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Given that K_NO_WAIT is passed as a timeout to net_context_recv(), it's
unlikely this function will return any error value. It's cheap to
check, though, so do it.
Coverity-CID: 170580
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The shell takes care of removing the module name so it is no longer
necessary to have this adjustment.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In certain TCP states we should not try to send RESET segment
to peer. So check this and do not try to use NULL pkt to send
a message.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net http monitor" command turns on HTTP monitoring,
which means that for each incoming HTTP or HTTPS request,
a information about source and destination address, and
the HTTP request URL is printed.
User can disable the monitoring by "net http" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_DEBUG_HTTP_CONN is enabled, then start to collect
currently active HTTP connections to HTTP server.
This is only useful for debugging the HTTP connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot send network data, then print the error code when
printing debug information about the issue. This is needed when
debugging the issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add HTTPS support into http-client library. The init of the
HTTPS client connection is different compared to HTTP client,
but the actual HTTP request sending is using the same API as
HTTP client.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is done so that both http_client and http_server functionality
can share the same heap.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When src and dst addresses are compressed based on context
information, uncompression method should verify CID bit,
SAC and DAC bits and context ID's. But it has missed some
cases which resulted in invalid uncompressed IPv6 header.
e.g. CID is set, SAC is 0 and DAC is 1 and context id's provided.
Uncompression method assumed that src address is compressed based
on context information but it is not.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Empty RPL HBH header will be inserted while finalizing IPv6 packet
but updated after finding nexthop and sent the packet. In case of
Bluetooth or multicast dst address it was missed. Resulted in
empty RPL HBH header and packet dropped at peer node. It should
be updated in all circumstances.
Jira: ZEP-2088
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The mbedtls debugging function was set before the ssl config
struct was initialized. This meant that it was not possible
to activate mbedtls debug prints. This commit sets the debug
print option after the config struct has been initialized.
Fixed also the debug prints which print extra \n which looks
very bad in debugging outputs.
This commit does not enable mbedtls debugging, it just makes it
possible to output mbedtls debug prints. In order to get mbedlts
debug prints one needs to do this:
* set DEBUG_THRESHOLD to >0 in http_server.c
* enable CONFIG_NET_DEBUG_HTTP in project config file
* enable MBEDTLS_DEBUG_C in mbedtls config file (see file pointed
by CONFIG_MBEDTLS_CFG_FILE option)
* in qemu, one needs to increase the size of the available RAM,
this setting does the trick, CONFIG_RAM_SIZE=300
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Semantics of ENOENT error as used previously is "named entity not
found", whereas for "I/O handle is not valid", there's EBADF. For
example, POSIX/SUSV2 doesn't even list ENOENT as a possible error
for accept(), connect(), recv(), etc. whereas it lists EBADF, e.g.:
http://pubs.opengroup.org/onlinepubs/7908799/xns/connect.html
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of waiting forever for a free net_buf, set a timeout to
the allocations (500 ms). This way the application will not be
blocked by memory exhaustion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some cases the net_pkt can be null when freeing it,
this will print error from net_pkt library. Avoid this by
checking the value of net_pkt before calling net_pkt_unref().
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we re-connect to same peer server, then we should select a new
source port. Noticed that if the same source port as before is
used for the new connection, the peer might drop the packet. This
was seen when connecting to Linux peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Defines a new tunable, CONFIG_NET_TCP_RETRY_COUNT, that determines the
number of segment retransmissions that the IP stack will attempt to
perform before resetting the connection.
The default value is 9 retransmissions, which amounts to 1:42 minutes,
as close as possible to the minimum recommended by RFC1122.
Jira: ZEP-1956, ZEP-1957
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If we receive unknown option in neighbor advertisement message,
then skip those properly. Old code did not check the length of
the extension options which could cause infinite loop.
Jira: ZEP-2219
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
If we received a bad HTTP request, then subsequent good requests
were also returning 400 error code. The parsing state needs to
be initialized after each received HTTP request.
Jira: ZEP-2181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes the following issue:
"In expression 1UL << chan - 1U, left shifting by more than 31
bits has undefined behavior. The shift amount, chan - 1U, is
4294967295."
Coverity-CID: 167140
Jira: ZEP-2131
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Print also network buffers that are allocated by the IPv6
fragment handler. This is very useful in debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user really wants, it is possible to increase the
maximum size of the fragmented packet. According to RFC 2460
chapter 5, we do not need to accept larger than 1500 byte IPv6
packets, so the max pkt limit is set to 2. But if really needed
the limit can be raised by defining NET_IPV6_FRAGMENTS_MAX_PKT
to some new value. Currently there is no Kconfig option for
doing this as it is unlikely that this is needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The cancellation of reassembly did not work as expected because
K_WORK_INITIALIZER() did not setup the timeout function properly.
So do the timer initialization at runtime instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 fragmentation was not working properly when the large
IPv6 packet was being sent. There is unit tests in next commit
that will test the IPv6 fragmentation sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the fragmented IPv6 packet was very large, we could run out
of resources. When that happened, we leaked the memory for the
pending fragments that were waiting reassembly.
Jira: ZEP-2166
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The previous default 60 seconds is way too long for our limited
amount of memory. It might be that the 5 sec is still too long
but that can be changed in the future.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shell itself already have a help command, so instead of creating a net
specific help just fill the help description of each command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shell modules are registered at link time thus it makes no sense to
leave it behind net_shell_init.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the HTTPS connection is closed, then properly handle call to
HTTP parser init in case of error and also remove any pending
data that belong to old connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive unknown option in neighbor solicitation message,
then skip those properly. Old code did not check the length of
the extension options which could cause infinite loop.
Jira: ZEP-2174
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we could not split the packet properly, make sure that the
fragments that we managed to allocate are unreffed and marked
as NULL.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print also the character when hexdumping a memory area.
This is useful so that one does not need to convert hex
values to characters in head. Unprintable chars are printed
as '.'
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to check attr and path variables for null as they
cannot be null.
Coverity-CID: 157595
Coverity-CID: 157602
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow the caller to delay the closing of the HTTP connection
for a number of milliseconds. The purpose for this is that
the client can send still some data back to us for a short
period of time.
This is needed for example for Basic authentication so that
server is able to receive authentication values back.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The address family of the UDP port listener was not set. This
caused weird debug prints in net-shell. Now the listener will
be registering IPv4 any address as it should.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a connection handler was registered, the checker function
introduced in commit 43b37cef ("Check duplicate UDP/TCP connection
handlers") did not check the address family (IPv4 or IPv6) of
the local end point properly. This caused duplicate connection
error to be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The uncompressed source address in packets was not handled properly if
NET_6LO_CONTEXT was enabled.
This implementation is identical to the contextless case.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
If we do not receive last ACK when the connection is tore down,
then do not wait forever as that would eat all the resources in
the network stack. So when we enter the LAST_ACK state, we setup
a timer that will unref the connection if the last ACK is not
received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without change to add ACK to FIN, invalid TCP packet is generated,
where ack sequence number is non-zero. Without adjusting sequence
number as done, ACK which we send in response to peer's FIN/ACK is
not recognized by peer, and peer keeps retransmitting its FIN/ACK.
Jira: ZEP-2104
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When connection handler was unregistered, we did not remove
it from cache. This caused invalid connection to be passed to
net_context after connection unregister if connection caching
was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We did not check UDP or TCP checksum to be valid after receiving
the packet. Fix this so that the checksum is validated when
packet is received in connection handler. As the checksum validation
can be resource intensive, do it after we have verified that
there is a connection handler for this connection.
The checksum calculation can be turned OFF if needed, but it is
ON by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit "net: tcp: Handle retransmitted packets from peer"
introduced over 80 character line that was missed in review.
Fixing it now.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled RPL and STATISTICS, then enable RPL
statistics by default as that is probably what user want.
Same thing for MLD statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we receive a packet with the sequence we already seen (and
processed), the most likely cause of it is that our ACK was lost,
and peer has to retransmit that packet. Then, we should just ACK
it, because otherwise peer will retransmit it again and again,
falling into exponential backoff and hosing the entire TCP
connection.
This makes changes to send_ack(), adding a flag to force sending
an ACK regardless of its cached status, and remove inline modifier,
as the function is big and called from many places.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We must check if we receive RST in any of the TCP states.
If we do not do this, then the net_context might leak as it
would never be released in some of the states. Receiving RST
in any TCP state is not described in TCP state diagram but is
described in RFC 793 which says in chapter "Reset Processing"
that system "...aborts the connection and advises the user and
goes to the CLOSED state."
We need to also validate the received RST and accept only those
TCP reset packets that contain valid sequence number.
The validate_state_transitions() function is also changed to
accept CLOSED state transition from various other states.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_if_get_default() was documented as returning "Default interface
or NULL if no interfaces are configured.", but actually didn't
return NULL in the latter case. Instead, it effectively returned
a pointer to random area of memory, shared with other system
structures, so calling functions like net_if_ipv4_set_netmask(),
etc. could trash unrelated memory.
Jira: ZEP-2105
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
RFC793, "Transmission Control Protocol", defines sequence numbers
just as 32-bit numbers without a sign. It doesn't specify any adhoc
rules for comparing them, so standard modular arithmetic should be
used.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit creates a HTTP server library. So instead of creating
a complex HTTP server application for serving HTTP requests, the
developer can use the HTTP server API to create HTTP server
insteances. This commit also adds support for creating HTTPS servers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a new UDP or TCP connection handler is to be registered,
we need to check if identical handler has already been created.
If a duplicate is found, the registering call will return -EALREADY.
The earlier code did not check this but allowed two identical
handlers to be created. The latter handler was never called in
this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This helper copies desired amount of data from network packet
buffer info a user provided linear buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we send TCP data segment, we need to set the length
of the application data by calling net_pkt_set_appdatalen().
This is done so that sequence number can be properly
advanced when we receive ACK to that pending packet.
Signed-off-by: xiaorui hu <xiaorui.hu@linaro.org>
fix misspelling in Kconfig files that would show up in configuration
documentation and screens.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Instead of separate sample application that does everything
related to HTTP client connectivity, create a HTTP client library
that hides nasty details that are related to sending HTTP methods.
After this the sample HTTP client application is very simple and
only shows how to use the client HTTP API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When adding link-local address to the cache the type needs to be
properly set as net_ipv6_addr_create_iid will attempt to use it
when generating the IPv6 address.
Jira: ZEP-2077
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is related to commit "net: tcp: Make sure ACK timer is not
run if cancelled" which did not set the cancel flag when the timer
was cancelled from tcp.c.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
And print a warning if that happens.
This will also avoid to raise an ASSERT on net_if_tx_thread()'s k_poll
as this one will be called with no events to work with.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of returning EIO let's bubble the error from net_context_send
back up to the caller in the following functions:
mqtt_tx_connect()
mqtt_tx_disconnect()
mqtt_tx_pub_msgs()
mqtt_tx_publish()
mqtt_tx_pingreq()
mqtt_tx_subscribe()
mqtt_tx_unsubscribe()
Change-Id: I9bb4396b227b8902ac1195a97bc37eb1959b643e
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With CONFIG_NET_DEBUG_NET_PKT enabled, the log messages are full of
errors regarding NULL parameters passed into net_pkt_unref in almost
every TX function for handling MQTT messages:
mqtt_tx_connect()
mqtt_tx_disconnect()
mqtt_tx_pub_msgs()
mqtt_tx_publish()
mqtt_tx_pingreq()
mqtt_tx_subscribe()
mqtt_tx_unsubscribe()
mqtt_parser()
Let's clean up the unref handling so that our debug log isn't quite
so full of error spam (as opposed to the normal amount of spam from
the net buf log).
Change-Id: Ib49d1192f51abe4329e6dc9da3c51a4a36290082
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The data->len of an inbound netbuf can be larger than a single
MQTT packet. For instance when a PINGRESP is also included
in the same netbuf. For this reason we should not be using
the data->len to determine how large the rest of the MQTT data is.
Specific Example: we've seen in testing that PINGRESP packets
can be included with a SUBACK packet in the same netbuf. Under
this case the current code uses the data->len incorrectly and
tries to find 3 QoS elements for the SUBACK packet when there
is only 1 (the rest of the data is for PINGRESP).
NOTE: A larger patch to iterate through the netbuf data parsing
individual MQTT packets will be needed to fix the MQTT subsys.
This patch only corrects the SUBACK parsing.
Change-Id: I7f6cebaaed9570b778d466de84331cf8c5060755
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Currently, app type MQTT_APP_PUBLISHER_SUBSCRIBER is not supported.
mqtt_init() will return EINVAL because the context rcv function is
either mqtt_publisher_parser or mqtt_subscriber_parser (not both).
Let's combine these functions into mqtt_parser and remove the app
type check from mqtt_init().
Change-Id: I60460e011395864706e293c997e9f8a65681b368
Signed-off-by: Michael Scott <michael.scott@linaro.org>
We need to set the mqtt context recv function prior to calling
net_context_recv which installs the mqtt_recv callback.
If not, we risk a race condition where an unprotected reference
to mqtt->rcv(mqtt, buf) is made in mqtt_recv().
Change-Id: If90ee58f4ea6f7879ef7c12b969ba27647426acc
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Some applications may want to reuse implementations of these
commands for debugging/diagnostics purpose even if they don't
use net shell per se, or implement an alternative shell.
Jira: ZEP-2064
Change-Id: I48cb66ccc41bd41a75a4eb8eb3c366316ec5a096
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_if_ipv6_router_add() will return router pointer on success.
This information must be cached in RPL instance, otherwise RPL
instance doesn't know about default route.
Change-Id: Ic6d80ebfa95c9a64df9adf2621ae2631d9bdb990
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When router or default router timer expired, interface will remove
router from the list. In this case RPL does not know about this.
When RPL node receives DIO messages it only verifies whether parent
exists or not. This extra checks will verify whether router really
in "used" state or not.
Jira: ZEP-2080
Change-Id: I4b36b3a2d495e76a38caddd058451daff08fab0c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_if_ipv6_router_rm() is the correct API to remove IPv6 router
from the interface as it also cancels the timer and raises a mgmt
event. The net_if_router_rm() only sets router as unused and
nothing else.
Change-Id: I55114288c9ae748520b67b206edcd4f5e420b1af
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the ./well-known/core response is bigger than L2 MTU then
response will be sent in multiple fragments. In mesh kind of networks
getting response from farthest node might loose packets. So better to
send response in a block wise fashion. Block size is configurable.
Change-Id: Id421c66597fe448c12a7215f04f63f4a284c14ab
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Value 0xFF represents End Of Options marker in CoAP message.
Use #define than magic numbers in code.
Change-Id: I3bef21ea827987f7c2e670447ee20574cb6288ae
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add timeout for packet and buffer requests. If there are no
buffers available gracefully drop the request.
Change-Id: I56fe2b606556149c83751aadc1c5eee7828a84a8
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Bluetooth only cares about the actual payload so net_pkt can be unref
as soon as the data fragments are detached.
Jira: ZEP-2070
Change-Id: Id528d5440f42903378883f5e696b3f663bbfa313
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of just plain assert, check that the packet we receive
is ok before passing it to processing function.
Jira: ZEP-2057
Change-Id: I5754c82d16e1522d8fcee561eea280eadeec31ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP trace values were not printed because of incorrect
config option used. Print also seq and ack values in decimal
in order to make it easier to correlate the values in other
prints in tcp.c.
Change-Id: I44d1535a84dcba8c6c937d348516ba801193ca23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use ready-made utility function which can take care of endianness
Change-Id: I1edd0b2ce1a086dd637e97308145f9b434e48a1f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When connect to diffrent router with the same gateway ip address,
need to clear arp cache when disable interface,
or it will use the wrong gateway mac address.
Call net_arp_clear_cache function replace to set arp_table 0.
Change-Id: Ib403a0c0030832ba48824db4d2d3fcb8add63d16
Signed-off-by: june li <junelizh@foxmail.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There was compiler error if CONFIG_NET_DEBUG_CONN was set.
Change-Id: Ibb6721c55dd2c56cd0097359a53563c6221859ea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to set the connect_cb for the context before sending SYN packet.
This is required if we have a loopback connection in which case everything
is happening more or less synchronously and the connect_cb would not be
called in this case because its value would still be null.
For remote network connections this patch makes no difference.
Change-Id: Id7f837cd9e81cd79c4666c98cae84f6cb1a77af0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must not let ACK timer to run if we have already cancelled it.
So keep track that the timer is cancelled and refuse to run it
if it was indeed cancelled. The reason why the timer might be run
in this case is because the timer might be scheduled to be triggered
after which one cannot cancel it.
Change-Id: I1c8b8cee72bc7a644e02db154d9d009b8d98ade2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The local port was set to 0 for IPv6 when registering
the connection handler. For IPv4, the code was not setting
the port in local_addr struct.
Change-Id: I82f0c08641a94d75d255ac306eca7bec6c332fba
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without this info it is a bit difficult to notice what is going
on in loopback case.
Change-Id: I8f61330c01d025e41f00d663bd26947b8cafb5c0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support to print connection handler information in net-shell.
There exists one connection handler for each UDP/TCP port that we
are listening. These prints are only available if CONFIG_NET_DEBUG_CONN
is enabled because the net_context has the same information. Thus the
connection handler info is only printed if debugging is active in order
to verify that handler information is proper.
Change-Id: I0be39a5adb89b2cdbd85524c5d943e4a562b0fde
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP debugging is enabled but if the loglevel is set to lower
than 4, then compiler prints warning about unused flags variable
in net_tcp_trace().
Change-Id: I2e663644b50fe97b75088202e21b286aa010953e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Only 2 attributes lacked this prefix, which makes sense to have, so
applying it accordingly and changing the helpers as well.
Change-Id: I095b2729f977f8fb1624eff8801a4a4e21416693
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 next headers are processed in a way so it is not required to store
which header has been already seen in the net_pkt, as the processing loop
can store internally which one it has seen already.
Change-Id: I266ba8a3a0081a162318cdafb474a0fc44a3185e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is actually useless as there is only 1 RX memory slab, and thus can
be removed to reduce net_pkt structure size.
Change-Id: I62d716515120e7356ee1e2d75bbe1ec32e22c35d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix warning using incorrect format specifier
Change-Id: Ib6800c40b2cd769612ae6f107e41a941926d8e66
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We need to check whether buf_sent was true when resending the TCP
segment, and do a buf ref if needed. If this is not done, the buf
will be unref after send, which will cause unpredictable results.
Change-Id: Ibd4490305de88ac6ffd04ec42bba196e57da5c10
Signed-off-by: june li <junelizh@foxmail.com>
While very unlikely it might happen that fragment pointer is NULL
when going through fragment list.
Coverity-CID: 167148
Change-Id: Ic3dbed7ee29c7b864d4830d726f65d7f62dcea84
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If error occurs while preparing response to .well-known/core request,
do not send partly filled payload by simply changing code part only.
It's better to unref the partly filled reponse and prepare a new error
response and send.
Change-Id: I28013a4e331cfc6f01de873e80af48f765e49494
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Commit "net: zoap: Fix memory overflow issue" fixed and implemented
./well-known/core response in a different way, so this api is not needed
anymore.
Change-Id: I8f945fb5842028be50ecfdef95cbe5da3189a538
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CoAP .well-known/core services list is bigger than single fragment
then current helper functions overwrites beyond fragment space. Which
corrupted whole stack. Right now sending response in multiple fragments
but preferred way is send response in block by block. This should
overcome packet loss across mesh scenarios. Recommended feature will
be supported with later patches.
Change-Id: I30ca55bde2516d80b3583731241ad295799c6614
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Most of the zoap utilities deal with first fragment of buffer chain.
So accessing of buf->frags directly make less usage of stack than
delcaring another variable for frag and its data. Due to code
refactoring couple of lines removed and in between those lines
coverity complained two issues, which is not valid now.
Coverity-CID: 157597
Coverity-CID: 157598
Change-Id: I3035c0625a131d49a4f0250ff0052875d3382544
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_ipv6_finalize_raw() inserts RPL(HBH) header after IPv6 header,
it updates IPv6 next header as HBH and HBH next header as original IPv6
next header.
Then net_ipv6_prepare_for_send() will update RPL HBH header if it exists.
But net_rpl_update_header() is comparing HBH option and IPv6 next header,
which is wrong. Wrong comparion does not update RPL instance id and
sender rank. Peer nodes drops all the packets due to invalid instance
ID and sender rank.
Change-Id: I91c1870a09c60f8e1ebc73e434dcc208caf6299a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Following flow does not work:
net_context_get
net_context_bind
..
..
net_context_put
net_context_get
net_context_bind
At instance of call to net_context_bind, conn_handler
is not NULL and returns with EISCONN.
This patch sets conn_handler to NULL in net_context_unref
Change-Id: I56a50839101b22161644b3cd7c5f510fa1abae3e
Signed-off-by: Mitul Shah <mitul.a.shah@intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds net_buf_reset which can be used to reset the state of a buffer.
Change-Id: I4b7c89dfd1a23a2ec8dfa3c99d5b02b9bcbceef3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I3efff6f5fa26f87d1e658d6336fef01ce45f5bb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Use UNALIGNED_GET and UNALIGNED_PUT throughout the networking stack to
access fields from the IP address structure. These structures can be
mapped directly to buffers and the macros are required for correct
unaligned memory access.
Jira: ZEP-2012
Change-Id: I55f9da7b143a22fa869d5d215c661de988cd9b91
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
