When ENABLED flag is used, we generate 32 byte DTLS
Connection Identifier and include that in our
DTLS Client HELO. This has no benefit as client only
has one connection toward the server, it does not need
any identification.
When SUPPORTED flag is used, we just include
zero length Connection Identifier in the handshake,
which tell server that we support Connection Identifier
and server can generate one for it.
We then use the CID in the packets that we send towards
server, but response packets don't contain any CID.
This gives all the benefit of CID as server is able to
identify us even when NAT mapping have changed.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add command to query to WiFi driver/firmware revision. The API is expected
to return the firmware revision and driver version as a string, and can be
used by the user to determine what revision of the WiFi driver is in use.
Signed-off-by: Sandip Dalvi <sandip.dalvi@nxp.com>
Instead of relaying on those macros having been defined
somewhere else let's define them for this file.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Now that we are using the shell macro to enforce argument count check,
both mandatory and optional arguments, these additions checks are
unnecessary.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add macro that allows registration of initialization functions that
are called when LwM2M engine starts.
On LwM2M engine starts up, it first executes all initialization
functions in following priority order:
1. LWM2M_PRIO_ENGINE
2. LWM2M_PRIO_CORE, this is where all LwM2M core objects are initialized
3. LWM2M_PRIO_OBJ, this is where all other objects are initialized
4. LwM2M_PRIO_APP, application initialization.
Now on the initialization phase, we could rely that certain objects have
already been registered.
For example custom objects can register callbacks to core objects.
On application phase, we can initialize sensor objects and register
their callbacks because objects have already been initialized.
This LWM2M_ON_INIT() should replace all use of SYS_INIT()
with the default CONFIG_KERNEL_INIT_PRIORITY_DEFAULT.
Priority order is actually just alphabetical order of names, so
the order is set on a linkin phase, and we don't need any
runtime checking for it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Remove TX-Injection and Promiscuous mode setting from Wi-Fi mode shell
command. These commands are being moved to ethernet l2 layer
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This set of changes brings in raw packet tx injection mode
feature to ethernet and removes it from being a Wi-Fi only feature.
It was earlier envisaged as Wi-Fi net management feature only.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
If bootstrap fails, RD client will call lwm2m_engine_stop()
which will close the context.
The socket loop, however still contains a call to
hint_socket_state(context, NULL) which has a null pointer now.
Fix the segfault by allowing nullpointer on hint_socket_state().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement DHCPv4 shell module, which allows to start/stop DHCPv4 server
operation, and print server status (address leases).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Increase socket services thread default stack size when DHCPv4 server is
enabled, as it uses synchronous processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So that it's possible to register ARP entries manually. Needed for DHCP
server implementation, which in unicast mode needs to reply to an IP
address that is not registered on the peer interface yet (hence no ARP
reply will be sent). It's needed to add an ARP entry manually in that
case, as hardware address is already known at that point.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new kconfig CONFIG_LWM2M_QUEUE_MODE_NO_MSG_BUFFERING.
When enabled and device is sleeping, Reqistration Update
message is skipped and messages from send operation and
notifications are sent right away.
Reqistration update message is also skipped when
lwm2m_engine resumes from pause state.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
L2 PPP is not able to handle the carrier being lost gracefully,
nor is it able to gracefully close the PPP connection when
net_if_down() is called.
This patch refactors the L2 PPP module to use the carrier state
to either properly close or simply terminate the PPP connection.
Additionally, it ensures that the PPP session is closed properly
before calling ppp->stop().
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Get TLS_DTLS_CID_STATUS and TLS_DTLS_PEER_CID_VALUE utilize
mbedtls_ssl_get_peer_cid, which expects that mbedtls_ssl_setup
has been done.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
User is able to tweak the socket service dispatcher thread
priority in order to get better performance from the system
if needed. By default the dispatcher thread runs in lowest
application thread priority (K_LOWEST_APPLICATION_THREAD_PRIO).
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The thread name output field was a bit too short in "net sockets"
command, so make it 25 char long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "net sockets" command was not checking if there is any
sockets in the system before trying to access them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The channel extraction from string directly uses the end variable with
limited data type, this causes issue if an invalid channel that exceeds
the data is given as an input e.g., 300, which would end up as a valid
channel 44.
Use an intermediate variable with type that can hold all possible
combinations (valid and invalid) and only after validation assign that
to the end type.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For none and WPA-PSK MFP isn't applicable, it was only introduced in
WPA2-PSK (RSN) and later.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Various network shell commands like ping need floating
point support from libc so select the CONFIG_REQUIRES_FLOAT_PRINTF
option for it.
Fixes#67601
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
This commit adds a function that updates the hostname displayed by the
net backend. It is called by the network stack when the hostname is
updated.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
If user has not supplied address pointer when calling accept(),
then we would not be able to figure out the used socket domain
properly. But as there is now SO_DOMAIN option supported, use
that to get the correct socket domain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The getsockopt() will return the address domain of the given
socket like AF_INET or AF_INET6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Made the definition of in_addr all_routers conditional to remove
compiler warning:
warning: 'all_routers' defined but not used [-Wunused-const-variable=]
The warning occurs when igmpv3 is enabled.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
This commit adds a new function the net_buf's API that allow an user
to match the net_buf's content with a data without copying it to a
temporary buffer.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
gcc prints this warning message
'strncat' specified bound 1 equals source length [-Wstringop-overflow=]
58 | strncat(fd, "C", 1);
There was no error in the code but avoid the warning by not using
strncat().
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The socket service provides a similar functionality as what
initd provides in Linux. It listens user registered sockets
for any activity and then launches a k_work for it. This way
each application does not need to create a thread to listen
a blocking socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to the POSIX specification, null pointer
is a valid value for the `address` argument
of the `accept` function.
This commit adds a check to prevent a null pointer
dereference inside `z_impl_zsock_accept`.
Signed-off-by: Mirko Covizzi <mirko.covizzi@nordicsemi.no>
A problem occurred while running PTP on a multi-port target
(RENESAS RZT2M) with two ports enabled. Announce messages on the
switched devices master port always contained local clock information
instead information from received on the slave port from the better
GM clock. Depending on the BMCA config this turned into having more
than one GM in the system.
Sending always the locally stored GM information helped to overcome
this issue.
Signed-off-by: Manuel Schappacher <manuel.schappacher@hs-offenburg.de>
Provision of configurable parameter for generating unblock event
ahead of TWT slot. Host application depending upon latencies can
configure this to wakeup rpu ahead of the TWT slot.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
ARM GCC version 12.2.0 (Zephyr SDK 0.16.4) generates the following build
warning from the strncpy call in "wifi_utils_parse_scan_bands":
warning: '__builtin_strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
To resolve this warning, pass the maximum length of the temporary
parse_str buffer to strncpy. This also has the benefit of correctly null
terminating parse_str, since we already verify the
scan_bands_str is properly null terminated with the strlen() check in
this function. We can therefore remove the line adding a null terminator
to parse_str as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This was missed in earlier that tried to fix all string comparisons to
use case insensitive comparison.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The help text was incorrect, we return -ETIMEDOUT instead
of -ECONNRESET when retransmission timeout occurs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In AP mode maintain the database of connected stations based on the
Wi-Fi management events and dump the list.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These are helpful to track clients being added and deleted.
Applications can actions based on these events.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These events communicate the status of AP mode operations (enable or
disable) with few pre-defined enumerations.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Update the example of scan -c argument.
Default value for max channels is set to 3,
So, update the example according to that.
Add closing bracket in -s.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Adding a callback for handling lwm2m messages with prefixed paths defined
by the gateway object. If CONFIG_LWM2M_GATEWAY_OBJ_SUPPORT is set,
each path is checked for the prefix stored in the object instances of the
gateway object 25. If prefixes match the msg is passed to the gw_msg_cb.
Signed-off-by: Simon Walz <simon.walz@autosen.com>
__bswap_ in zephyr/sys/byteorder.h conflicts with __bswap_ in host's
byteswap.h. byteswap.h from host compiler used in posix_native_64 boards
causes a compilation issue.
This commit renames __bswap_ to BSWAP_ to prevent collision.
Before this commit a compilation error can be created by adding #include
<byteswap.h> to samples/net/sockets/echo/src/socket_echo.c
This does not change external API to byteorder.h, but does change
internal implementation which some other source files depend on.
Replaced manual byteswap operations in devmem_service.c with APIs from
byteorder.h which automatically converts to CPU endianess when necessary.
Fixes#44324
Signed-off-by: Jonathan Hamberg <jonathanhamberg@gmail.com>
Add a function callback that is called when the TCP connection
is closed. This is only available if doing network tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The FIN timer was not set when we entered the FIN_WAIT_1 state.
This could cause issues if we did not receive proper packets
from peer. With this fix, the connection is always terminated
even if peer does not respond.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we are in a passive close state, then it is possible that
the ack we are waiting is lost or we do not accept the one peer
sent to us because of some earlier out of memory issue.
So install a timer (using by default the FIN timer value) to
close the connection if the last ack is not received on time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The help text uses the capital case as its an acronym, but passing
capital case fails. Also extend that to others as well.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For better readability, below rules will help:
* Each command should be separated by a newline
* Each command should end with a full stop (intermediate statements
shouldn't have full stops)
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
We are using standard notation to differentiate optional and mandatory,
so, no need for a heading.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
lwm2m_engine_pause() caused deadlock if it was called within
engine thread.
Remove while loop from lwm2m_engine_resume().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add short delay before triggering registration update. This allows
postponing the update from application side if needed.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
DTLS socket is not really connection-less as UDP, as it required the
DTLS handshake to take place before the socket is usable. Therefore,
align the DTLS connect() behavior with regular TLS.
The change is backward compatible. connect() call is still optional for
DTLS socket (the handshake can still take place from send()/recv()) and
a socket option was provided to disable DTLS handshake on connect().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When using DTLS socket, the application may choose to monitor socket
with poll() before handshake has been complete. This could lead to
potential crash (as the TLS context may have been left uninitialized)
and unexpected POLLIN reports (while handshake was still not complete).
This commit fixes the above - POLLIN will only be reported once
handshake is complete and data is available
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a socket error was caused by TLS layer, it was not reported with
POLLERR. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case TLS session is closed at the TLS level (and thus recv() reports
0 to the application) a certain race occurs between consecutive recv()
call, and TCP session teardown. As mbedtls_ssl_read() only reports
session close upon receiving CLOSE alert, consecutive non-blocking
recv() calls would report EAGAIN instead of connection closed, if called
before underlying TCP connection was closed.
Fix this, by storing the information that TLS session has ended at TLS
socket level. The new flag will be checked before attempting further
mbed TLS actions, so that connection status is reported correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we receive a IPv4 packet to v4 mapped address, the relevant
net_context is bound to IPv6. This causes issues if we try
to get the family from the context struct in sendto.
Fix this by checking if the destination address is IPv4 but
the socket is bound to IPv6 and v4 mapping is enabled.
If all these criterias are set, then set the family of the
packet separately and do not get it from net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure iovec is initialized to a value so that there
is no possibility that it is accessed uninitialized.
Fixes: #66838
Coverity-CID: 334911
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The original idea was to check that we have enough network
interfaces in the system. The check needs to verify max IPv4
and IPv6 supported interfaces instead of always checking
IPv6 one.
Fixes: #66843
Coverity-CID: 334899
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Refactored the socket state indication into its own function
that checks the state of TX queues as well as number of
pending CoAP responses.
Check the state after receiving a packet, as it might
have been a last Ack packet we have been waiting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Deprecate lwm2m_set_u64() and lwm2m_get_u64 as only
LWM2M_RES_TYPE_S64 exist. Unsigned variant is not defined.
Technically these might have worked OK, but it is undefined
what happens to large unsigned values when those are
converted to various payload formats (like CBOR) that might
decode numbers differently depending of their signedness.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Any received address is no longer valid once the interface goes down.
Leaving the address assigned results in the L4 interface transitioning
through the following on reconnection:
UP: Interface is connected
DOWN: Old address is removed by DHCP
UP: New address is re-added by DHCP
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Networking events are masks of bits, which are almost impossible to read
as decimal, and trivial to read as hex. Also unifies the format string
across multiple outputs for some flash savings.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
If we receive a packet where the source address is our own
address, then we should drop it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we receive a packet from non localhost interface, then
drop it if either source or destination address is a localhost
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow engine to give hints about ongoing CoAP transmissions.
This information can be used to control various power saving
modes for network interfaces. For example cellular networks might
support release assist indicator.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In slow networks, like Nb-IOT, when using queue mode,
there might be significant delay between the time we
put the packet into a transmission queue and the time
we actually start transmitting.
This might cause QUEUE_RX_OFF state to be triggered earlier
than expected. Remedy the issue by updating the timestamp on the
moment where packet is accepted by zsock_send().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In case a waiting TLS socket reports an error in the underlying poll
call, try to read the actual error from the socket, instead of blindly
returning -EIO in all cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are several subsystems and boards which require a relatively large
system heap (used by k_malloc()) to function properly. This became even
more notable with the recent introduction of the ACPICA library, which
causes ACPI-using boards to require a system heap of up to several
megabytes in size.
Until now, subsystems and boards have tried to solve this by having
Kconfig overlays which modify the default value of HEAP_MEM_POOL_SIZE.
This works ok, except when applications start explicitly setting values
in their prj.conf files:
$ git grep CONFIG_HEAP_MEM_POOL_SIZE= tests samples|wc -l
157
The vast majority of values set by current sample or test applications
is much too small for subsystems like ACPI, which results in the
application not being able to run on such boards.
To solve this situation, we introduce support for subsystems to specify
their own custom system heap size requirement. Subsystems do
this by defining Kconfig options with the prefix HEAP_MEM_POOL_ADD_SIZE_.
The final value of the system heap is the sum of the custom
minimum requirements, or the value existing HEAP_MEM_POOL_SIZE option,
whichever is greater.
We also introduce a new HEAP_MEM_POOL_IGNORE_MIN Kconfig option which
applications can use to force a lower value than what subsystems have
specficied, however this behavior is disabled by default.
Whenever the minimum is greater than the requested value a CMake warning
will be issued in the build output.
This patch ends up modifying several places outside of kernel code,
since the presence of the system heap is no longer detected using a
non-zero CONFIG_HEAP_MEM_POOL_SIZE value, rather it's now detected using
a new K_HEAP_MEM_POOL_SIZE value that's evaluated at build.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit 6b644dff67.
Reason: breaks Peer-to-Peer gPTP connection. A better solution should be
found to handle the optional TLV on the announce message (chapter 10.5.1
IEEE 802.1AS-2011)
Signed-off-by: Mario Paja <mario.paja@zal.aero>
Zephyr does not support MLDv1 (which has a shorter header than MLDv2),
and this resulted in log errors being printed on header access if MLDv1
queries were received. Since receiving such packet is not really an
error, just drop it silently.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update coap_service_send and coap_resource_send to take an optional
pointer argument to the newly introduced coap_transmission_parameters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
AP enable takes the same parameters as connect, so, update the help and
also fix the optional parameter count when security is involved.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case one of the networking shell backends is enabled, net arp command
could potentially trigger a deadlock, as it locks the ARP mutex before
TCP connection mutex, while TCP stack could do this in reverse order
(for instance when sending ACK or retransmission).
Mitigate this, by forcing a separate TX thread in such case, so that ARP
mutex is no longer accessed with TCP mutex locked.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace function parameter 'retries' with pointer to structure
holding coap transmission parameters. This allows setting the
retransmission parameters individually for each pending request.
Add coap transmission parameters to coap_pending structure.
Update migration guide and release notes.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
The dummy L2 layer does not implement any L2 functionality
but it does not mean that it should not implement start/stop
functions that are called when the related network interface
is brought up or taken down.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is pointless to take net interface up if the underlaying
device is not ready. Set also the interface status properly
in this case.
Fixes#65423
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use correct format specifier for LOG_ERR in lwm2m_obj_device.c. The
previously used format specifier of %u was correct for 32 bit systems
but would produce a build warning for 64 bit systems.
Fixes#66441
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As the common.h is only meant to be used by the network
shell files, rename it to be more descriptive in order to
avoid possible conflicts with any other common.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Calling the registered receive callback when releasing TCP context
doesn't make sense, as at that point the application should've already
closed the associated socket (that's one of the conditions for the
context to be released). Therefore, remove the pointless receive
callback call, while keeping the loop to unref any leftover data packets
(although again, I don' think there should be any packets left at that
point, as they're all consumed in tcp_in()).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
While improving thread safety of the TCP stack I've introduced a
possible deadlock scenario, when calling tcp_conn_close() in tcp_in().
This function shall not be called with connection mutex locked, as it
calls registered recv callback internally, which could lead to deadlock
between TCP/socket mutexes.
This commit moves the tcp_conn_close() back where it was originally
called. I've verified that the thread safety is still solid with the
test apps used originally.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add empty macro for net_if_mon functions if they are not otherwise
defined, like the other functions in the net_if.c file have.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add new functions to the public CoAP API to configure CoAP packet
retransmission settings. Application may need to re-configure the
settings for example when cellular modem changes connection from
LTE-M to NB-IoT or vice versa.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
The number of Kconfig options for the TCP stack grew considerably,
therefore it makes sense to move them to a separate file not to bloat
the Kconfig file with generic networking options.
Take this opportunity to reorder TCP options, so that protocol
parameters (timings/buffer sizes) are not mixed up with optional
protocol features (fast retransmit/congestion avoidance etc.).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When a TCP connection is established, if there is no data exchange
between the two parties within the set time, the side that enables
TCP Keep-alive will send a TCP probe packet with the same sequence
number as the previous TCP packet. This TCP probe packet is an empty
ACK packet (the specification recommends that it should not contain
any data, but can also contain 1 nonsense byte, such as 0x00.). If
there is no response from the other side after several consecutive
probe packets are sent, it is determined that the tcp connection has
failed, and the connection is closed.
The keep-alive default parameters are aligned with Linux defaults.
Signed-off-by: Horse Ma <mawei@coltsmart.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If observed resource was written during the pMin period, it did
not schedule any wake-up event into the future. Notify message would
then only be generated as a result of any other (like Update) event.
Refactor check_notifications() to follow same pattern as retransmit_req().
Return the next event timestamp, which could be now.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
SNTP response is not analyzed for uncertainty, and no uncertainty is given
to the `struct sntp_time` returned. Fix it with a Kconfig option that adds
optional SNTP uncertainty and timestamp fields in SNTP time struct, and
calculates these when parsing the response.
Adds two helper functions to convert Q16.16/Q32.32 in seconds to `int64_t`
in microseconds to facilitate this.
Also changes combined `lvm` field in `struct sntp_pkt` to bit-fields
`li`, `vn`, and `mode`.
Signed-off-by: Jasper Smit <git@jrhrsmit.nl>
Add const prefix for service uuid and char uuid.
Since Service UUID and Char UUID should not change in the service
definition, they are most reasonably defined as rodata, also for
save some ram footprint.
The field `attr->user_data` type is `void *`, as this PR change
all Service UUID to rodata, so there must add (void *) to avoid warning.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add Kconfig choice for the user to select how Network Events are
handled. It's own thread, the system work queue or synchronous when
events are emitted.
By default a separate thread is created to be backwards compatible.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This reverts commit 5227f24815.
The coap observer events will be replaced with net_mgmt events.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
A device can be reset before the error code list is communicated
to a LwM2M server so optionally store error list in settings so it
can restored after reset.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Iterating over connection list w/o mutex lock could lead to a crash on
constant incoming packet flow. Fix this by:
1. Adding mutex lock when iterating over an active connection list, to
prevent list corruption.
2. Create a copy of the callback and user data pointers before releasing
lock, to prevent NULL pointer dereference in case connection is
released before callback is executed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Eliminate race between TCP input thread and TCP work queue, when
dereferencing connection. This normally would not manifest itself during
standard TCP operation, but could be a potential opening for abuse, when
the already closed TCP connection is kept being spammed with packets.
The test scenario involved sending multiple TCP RST packets as a
response to establishing the connection, which could result in system
crash. The following changes in the TCP stack made it stable in such
scenario:
1. Use `tcp_lock` when searching for active connections, to avoid
potential data corruption when connection is being removed when
iterating.
2. Avoid memset() during connection dereference, not to destroy mutex
associated with the connection. The connection context is only
cleared during allocation now.
3. Lock the connection mutex while releasing connection.
4. In tcp_in(), after locking the mutex, verify the connection state,
and quit early if the connection has already been dereferenced.
5. When closing connection from the TCP stack as a result of RST or
malformed packet, verify connection state to make sure it's only done
once, even if multiple RST packets were received.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Silently drop the IPv6 Neighbor Advertisement if we receive it
for an unknown neighbor or if there some some issue in the packet.
Returning error here would cause the ICMP module to print an
actual error which just pollutes the log without any apparent
benefit.
Fixes#66063
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If server registration fails, allow fallback to secondary server,
or fallback to bootstrap.
Also allow fallback to different bootstrap server.
Add API to tell RD client when server have been disabled by
executable command.
Changes to RD state machine:
* All retry logic should be handled in NETWORK_ERROR state.
* New state SERVER_DISABLED.
* Internally disable servers that reject registration
* Temporary disable server on network error.
* Clean up all "disable timers" on start.
* Select server first, then find security object for it.
* State functions return void, error handling is done using states.
* DISCONNECT event will only come when client is requested to stop.
* NETWORK_ERROR will stop engine. This is generic error for all kinds
of registration or network failures.
* BOOTSTRAP_REG_FAILURE also stops engine. This is fatal, and we cannot
recover.
Refactoring:
* Server selection logic is inside server object.
* sm_handle_timeout_state() does not require msg parameter. Unused.
* When bootstrap fail, we should NOT back off to registration.
This is a fatal error, and it stops the engine and informs application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
React to disable executable, as well as add callback that allows
disabling server for a period of time.
Also add API that would find a next server candidate based on the
priority and server being not-disabled.
Move all server related functions into its own header.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We are creating a multicast address in mDNS or LLMNR
responder so set the TTL or hoplimit using the multicast
variant API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We specifically set TTL/hoplimit to 1 for LLMNR,
but only want to set it if in that specific case.
We must not pass TTL/hoplimit value 0 as that would
cause the packet to be dropped.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
* Check IPv4 TTL or IPv6 hop limit and drop the packet if
the value is 0
* Check the IP addresses so that we do the loopback check
at runtime if the packet is destined to loopback interface.
* Update the statistics properly for dropped packets.
* Do not update sent packets if we drop packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPv4 TTL could only manipulated via net_context interface.
It makes sense to allow the same from socket interface via
the setsockopt/getsockopt calls.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_if_ipv6_set_hop_limit() API was missing the "_if_"
part in it. Fix this so that the network interface API is
consistent. The old function is deprecated and should not
be used. The old function is left to the code and it calls
the new properly named function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This was somehow missed, but since ICMP rework, message handlers should
not dereference the packet, as it's done by the ICMP lib.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Commit 55802e5e86 fixed error handling of
TX errors, in case ARP request was generated. There are however also
other places where post-ARP cleanup should be done on the TX path (like
running out of buffers for Ethernet L2 header allocation).
This commit fixes those cases in ethernet_send(), where function would
exit early and report error after ARP prepare stage.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Long arguments are handy for new users. Also use hyphen's rather than
underscore to follow the convention.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Newly added security types are missing from the help. Also, now that we
have two variants of PSK, use the prefix to disambiguate.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When interface names are enabled, a default name is applied
after initialization. Unintuitively, this overwrites any name that is
set during the net_if init.
This change sets a default name first, and then allows net_if
init to overwrite that default name if it chooses to.
Signed-off-by: Noah Luskey <noah@silvertree.io>
Signed-off-by: Noah Luskey <LuskeyNoah@gmail.com>
While printing SSID in wifi status command, If the
length is maximum(32 character). It leads to buffer
overflow. It required one character for null
terminator ‘\0’. Changing the Format Specifiers to
print proper SSID.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
This fix addresses wrong announce message length warning message.
TLV is a variable length (4+8N) based on the 802.1AS-2011 (table 10-8). In
Zephyr TLV is fixed to 12 bytes. TLV type and length are already taken
into account in the announcement message length.
Signed-off-by: Mario Paja <mario.paja@zal.aero>
Set the static initialiser socket file descriptor to -1 to make sure
it is invalid before using coap_service_send.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add extra checks that make sure that msg_iov is set
as we cannot receive anything if receive buffers are
not set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix two issues with sending ICMP Echo Reply for requests sent for
multicast address:
* Use the originator IP address instead of multicast when selecting
source address for the reply
* In case no address match is found, drop the packet, instead of
replying with unspecified address.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CoAP request handler returns errno codes in the following cases:
* ENOENT if no handler found; respond with 4.04
* ENOTSUP if an unknown request code received; respond with 4.00
* EPERM no handler found for the method; respond with 4.05
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Fix the possible race between TCP work items already scheduled for
execution, and tcp_conn_unref(), by moving the actual TCP context
releasing to the workqueue itself. That way we can be certain, that when
the work items are cancelled, they won't execute. It could be the case,
that the work item was already being processed by the work queue, so
clearing the context could lead to a crash.
Remove the comments around the mutex lock in the work handlers regarding
the race, as it's not the case anymore. I've kept the locks however, as
they do make sense in those places.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If some specific option is not enabled, then add missing
ARG_UNUSED() calls in relevant functions.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option setters for bool, uint8_t and uint16_t
values. Use those generic setters when storing the desired
option value.
The uint16_t option setter stores the value to uint16_t variable
and expects that user supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option getters for bool, uint8_t and uint16_t
values. Use those generic getters when fetching the desired
option value.
Noticed mixed usage (bool vs int) for txtime option. Changed
the code to use int type like in other options.
The uint16_t option getter gets the value from uint16_t variable
but returns int value to the caller, and also expects that user
supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The Zephyr's core ethernet code had to be adjusted to support setting T1S
PLCA parameters from user Zephyr programs.
Such approach allows more flexibility, as T1S network configuration;
especially PLCA node numbers, can be assigned not only via device tree
at compile time. For example user can read them from EEPROM and then
configure the network accordingly.
For now - the union in struct ethernet_t1s_param only consists of plca
structure. This can change in the future, when other T1S OA parameters -
like Receive/Transmit Cut-Through Enable (bits RXCTE/TXCTE in OA_CONFIG0
register) are made adjustable from user program.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Protected credential storage makes use of the PSA API, therefore it must
be present in the library include path. This was missed during the
recent CMakeLists.txt rework of this library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Regular OpenThread upmerge to commit `75694d2`.
Move CONFIG_OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE
from header file to Kconfig.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
If we for some reason are supplied unsupported socket type in
recvfrom(), then return ENOTSUP error to the caller instead of
silently accept it by returning 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user has set either IP_PKTINFO (for IPv4) or
IPV6_RECVPKTINFO (for IPv6) socket options, then the system
will return relevant information in recvmsg() ancillary data.
Fixes#36415
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_PKTINFO or IPV6_RECVPKTINFO BSD socket options that
can be used to get extra information of received data in
the ancillary data in recvmsg() call.
For IPV6_RECVPKTINFO see RFC 3542 for details.
For IP_PKTINFO see Linux ip(7) manual page for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add low level support for setting IP_PKTINFO or IPV6_RECVPKTINFO
socket options. The support is disabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When a client uses wildcard subscription and a new message is
published to the matching topic for the first time, the gateway
sends REGISTER message to the client, containing the exact
topic name and a new topic ID.
This change fixes adding these topic ID and name to the internal
topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Add a function to MQTT-SN library API to get topic name by ID
from the internal topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Added igmpv3 support based on the already existing structure for igmpv2.
The already existing api is not modified to prevent breaking exisiting
applications.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Added igmpv3 checksum function to make it possible to calculate the
checksum of a complete igmpv3 pkt at once.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Fix the CMakeLists of the tls_credentials and sockets folders
to link/interface to the net library instead of the zephyr library.
This fixes issues where some files are not found in the link interface
when compiling the sources in this folder.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Make sure we send the entire packet buffer before bumping the packet
counter, send() does not guarantee that all of the requested data will
be sent at once with STREAM socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case underlying socket reported error while waiting for TX, the
errno value was not set accordingly. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Otherwise, if the application was for example blocked on poll() pending
POLLOUT, it won't be notified.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework how data is queued for the TCP connections:
* net_context no longer allocates net_pkt for TCP connections. This
was not only inefficient (net_context has no knowledge of the TX
window size), but also error-prone in certain configuration (for
example when IP fragmentation was enabled, net_context may attempt
to allocate enormous packet, instead of let the data be fragmented
for the TCP stream.
* Instead, implement already defined `net_tcp_queue()` API, which
takes raw buffer and length. This allows to take TX window into
account and also better manage the allocated net_buf's (like for
example avoid allocation if there's still room in the buffer). In
result, the TCP stack will not only no longer exceed the TX window,
but also prevent empty gaps in allocated net_buf's, which should
lead to less out-of-mem issues with the stack.
* As net_pkt-based `net_tcp_queue_data()` is no longer in use, it was
removed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new function to allocate additional buffers for net_pkt, w/o any
additional preconditions/checks. Just allocate what was requested.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
RSRQ is the ratio between send and received signal strength and usually
understood/expected to be represented as a ratio in dB and as such always
has a negative range. So to allow RSRQ to be represented correctly the
resource must allow negative values, but currently it's limited to unsigned
8bit integers.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
Network interface numbering starts from 1, therefore when accessing
help/index array, the interface index should not be used directly, but
rather decremented by 1, to avoid out-of-bound access on those arrays.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that the error message does not overflow the transmit buffer
when copying the error message string.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's not really much to do when the transmission of the error reply
fails, but we can at least log the failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The result of string to float conversion in LwM2M shell write command
was not verified, which could result in incorrect data being written to
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify the return value of net_pkt_skip() function, in case the parser
ignores the unrecognized options, so that in case the option was
malformed and the actual provided option length exceeds the packet
length, it is recognize (net_pkt_skip() should fail then).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As reported by Coverity, cpkt was being used before checking it's not
NULL.
Fixes#65372 / CID: 323075
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Do not enable subsystem/driver shell modules by default and stop abusing
CONFIG_SHELL_MINIMAL, which is internal to the shell subsystem, to decide
when to enable a driver shell.
The list of shell modules has grown considerably through the
years. Enabling CONFIG_SHELL for doing e.g. an interactive debug session
leads to a large number of shell modules also being enabled unless
explicitly disabled, which again leads to non-negligible increases in
RAM/ROM usage.
This commit attempts to establish a policy of subsystem/driver shell
modules being disabled by default, requiring the user/application to
explicitly enable only those needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Since lwm2m_load_tls_credentials(ctx) will assume that the ctx has a
valid security object assigned to it, it should not be called at all
when ctx.use_dtls == false.
This solves a major bug where LwM2M comms are DTLS encrypted but FOTA is
allowed to be plain-text.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
No issues with gcc but clang gives this error for
the *v4 variable few lines below.
.../lib/dns/mdns_responder.c:712:2: error: expected expression
struct net_context *v4;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of just listening first network interface in the system,
install a multicast listener to all available network interfaces.
Fixes#18748
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a helper macro that can be used at runtime to return
the number of network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to bind to different network interface. This is
useful if binding a multicast address to a certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The use case is to have a netbuf pool that is used exclusively with
net_buf_alloc_with_data() where the destroy callback takes care of
freeing the actual data buffer pointed to by __buf.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Adds a shell interface for TLS Credentials, allowing management of
credentials via the Zephyr shell
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add (internal) support for sectag iterating.
Also officially marks negative sectag values as reserved for internal
use.
This will allow a prospective TLS credentials shell to iterate over all
available credentials.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds an internal credential_digest for generating a string digest of
credentials.
Such digests would allow users of a prospective TLS credentials shell to
verify the contents of a given credential without directly accessing
those contents.
Offloading the digest process to the underlying backend allows backends
for which private portions are not directly accessible to be eventually
supported.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
A CoAP client can re-issue an observe request (same endpoint and token)
to refresh it's subscription. No new observer should be registered in
this case.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add a function to the public CoAP API to find and return the unique
observer based on the address and token.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
A recent iface lock removal in ed17320c3d
exposed issues with concurrent access on TX to drivers that are not
re-entrant.
Reverting that commit does not really solve the problem, as it would
still exist if multiple Traffic Class queues are in use.
Therefore, introduce a separate mutex for TX data path, protecting the
L2/driver from concurrent transfers from several threads.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Core objects version reporting was broken for LwM2M version 1.1, as the
default object version not necessarily matches the LwM2M version.
Therefore, implement a table with default object versions for particular
LwM2M version, which can be looked up when determining whether it's
needed to include object version or not during Registration/Discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds the option to register an event handler to CoAP
resources when observers are added/removed.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The main action in this function it queueing the packet for
transmission which doesn't need a lock and interface flags use atomic
operations.
So, remove the unnecessary lock.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In CoAP blockwise the client is supposed to
respond with 2.31 Continue code on Ack. This was recently
broken when Block1 parsing was moved after the initialization
of reponse packet. We need separate CoAP API to modify the code
of existing CoAP packet.
Also Ack packet should contain the Block1 options, even the
last one.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Instead of consistently checking for both, IPv4 and IPv6 fragmentation
in several places, add a hidden Kconfig symbol which indicates that some
IP fragmentation has been enabled (either IPv4 or IPv6 or both).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The current logic to determine whether a packet is IP reassembled is
flawed, as it only worked in certain conditions (which was ok, as the
conditions were satisfied for the current use case, but now it's a
public function). Therefore, add an explicit flag that indicates whether
a packet is IP reassembled or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case of reassembled IP packets, we cannot rely on checksum
offloading as the drivers/HW has no means to verify L4 checksum before
the fragment is reassembled. Therefore, for such packets, verify L4
checksum in the software unconditionally.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move the existing code verifying that the net_pkt was reassembled at IP
level to a helper function, as it will be needed in other places as
well. Additionally, add packet family check before accessing union
fields.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPv4/6 fragmentation did not set the net_context pointer on the fragment
packet and in result the send callback registered on net_context was not
called. Therefore, copy the net_context pointer from the original packet
to the final fragment to ensure that the registered callback is called.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Skipping both next_hdr_off and last_hdr_off and filling last_hdr
variable doesn't make much sense, as this effectively moves the packet
cursor inside/behind the last (L4) header with no particular meaning.
Plus the last_hdr variable isn't really used anywhere, which kind of
proves the point. Therefore, remove the unused variable and needless
net_pkt operations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case the stack has to fragment the IPv6 packet, calculate the
checksum before fragmentation (if haven't done so).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case the stack has to fragment the IPv4 packet, calculate the
checksum before fragmentation (if haven't done so).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modify internal L4 protocols APIs, to allow to enforce checksum
calculation, regardless of the checksum HW offloading capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new net_pkt checksum, which indicate checksum status on the packet
(i. e. whether it has already been calculated or not).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix tcp.c compilation if user unsets
CONFIG_NET_TCP_CONGESTION_AVOIDANCE config option.
Fixes#64824
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The enum is mainly to print output of band, so, the default value is 0
which means 2.4GHz, which is not correct when using it to configure like
in connect.
Fix the default value to unknown i.e., no user preference. This way we
can use same enum for both set and get.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Implement testcases for Information Reporting Interface [300-399]:
* LightweightM2M-1.1-int-301 - Observation and Notification of parameter
values
* LightweightM2M-1.1-int-302 - Cancel Observations using Reset
* LightweightM2M-1.1-int-304 - Observe-Composite Operation
* LightweightM2M-1.1-int-306 – Send Operation
* LightweightM2M-1.1-int-307 – Muting Send
* LightweightM2M-1.1-int-308 - Observe-Composite and Creating
Object Instance
* LightweightM2M-1.1-int-309 - Observe-Composite and Deleting
Object Instance
* LightweightM2M-1.1-int-310 - Observe-Composite and modification of
parameter values
* LightweightM2M-1.1-int-311 - Send command
303 and 305 cannot be implemented using Leshan as it only support
passive cancelling of observation.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If the interface is WiFi one, then print information about it.
Also the device information is useful to know so print device
name corresponding to the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit names a couple of choices to allow the default
value to be overridden by Kconfig files out of tree
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not include the resource type (rt=) in the registration message when
using the OMA JSON format. This was a workaround specifically for the
Wakaama LwM2M server which is no longer needed since the latest master
branch.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Portfolio object created string buffers for Identity resources
that was overlapping on some cases.
Don't calculate pointers by hand, allow compiler to calculate it.
Fixes#64634
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Extend the previous support of creating object instances by allowing
creation of resource instances as well.
Similarly, add support for deleting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If user adds IPv6 address to the network interface, check
if the address is a multicast one and add it to multicast
group if it is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user adds IPv4 address to the network interface, check
if the address is a multicast one and add it to multicast
group if it is.
Fixes#64389
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Default behaviour should only bind to port independent of IP, this
allows even multicast/broadcast L4 traffic to be received.
User can always specify a specific address to bind using shell or
Kconfig or API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Using a generic IP for address set failures is confusing, esp. two same
prints (one for v4 and the other for v6), so, use explicit version.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Moving the Zephyr specific config options from
modules/hostap/Kconfig to corresponding Kconfig where the
option is specified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
CoAP reply structure user_data should be kept between
ongoing blocks, so that callbacks for LwM2M send continue
to work on blockwise transfers.
Fixes#64290
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The new "net sockets" command will utilize the object core
support to track and show information about BSD sockets that
are created in the system. This command is able to show info
for all network sockets (native, offloaded etc) in the system.
Example of the output of the new command:
uart:~$ net sockets
Creator Name Flags FD Lifetime (ms) Sent Received
main af_inet46 6ST 0 3260 819 498
main af_inet46 4ST 1 2110 469 142
main af_inet46 6DU 2 2110 9941 9941
main af_inet46 4DU 3 2110 1375 621
4 active sockets found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The writefds is typically set if there is an error while
waiting for example the connect() to finish. So check if
the user supplied the writefds and update it accordingly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we try to connect to a port which no socket is listening to,
we will get a packet with "ACK | RST" flags set. In this case
the errno should be ECONNREFUSED instead of ETIMEDOUT like we
used to return earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Increase reference count already when initial SYN is sent.
This way the tcp pointer in net_context is fully valid for
the duration of the connection.
Fixes#63952
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In case ping is sent to own address, the request is looped back to the
stack and served before ping work had a chance to reschedule. In result,
when the final ping reply has been server, and ping operation finalized
with `ping_done()`, the work was rescheduled one last time, causing the
ping timeout to be reported. Fix this by rescheduling the work before
sending the actual request, so that the reply handler can cancel the
work properly in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case packet is looped back to the stack, set LL address information
on the packet, using the LL address set on the corresponding network
interface, so that the information can be interpreted by the SOCK_DGRAM
packet socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we run network tests under tests/net, then set the
Dummy network interface as a default one so that it will
be picked up first.
This should solve the issue if the DUT is having a real
network interfaces like onboard Ethernet interface which
could cause the test to fail. The test might fail in this
case because the network tests assume that only simulated
network interfaces are used by the tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The remote address of the connection is checked whether
it is v4-mapping-to-v6 address in which case we should
print it such.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When a new incoming connection is accepted, do not overwrite
the listening remote address. The remote address for the
listening socket is the any address (like :: for IPv6)
and not the accepted socket remote address.
This only affects the "net conn" shell command which prints
the remote address incorrectly. There is no problem accepting
new connections in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We should use the NET_CONN_RANK() macro when printing the
current rank value as that macro masks the rank values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The socket address passed in accept() call should point
to the new connection address and not the old one.
Fortunately this only affects things after the v4-mapping-to-v6
support so older code than this works fine.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The address length of the accepted socket must reflect the
size of the address struct, so it should either be
sizeof(struct sockaddr_in) for IPv4 or sizeof(struct sockaddr_in6) for
IPv6 socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This allows IPv4 and IPv6 share the same port space.
User can still control the behavior of the v4-mapping-to-v6
by using the IPV6_V6ONLY socket option at runtime.
Currently the IPv4 mapping to IPv6 is turned off by
default, and also the IPV6_V6ONLY is true by default which
means that IPv4 and IPv6 do not share the port space.
Only way to use v4-mapping-to-v6 is to enable the Kconfig
option and turn off the v6only socket option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for IPv4 mapped IPv6 addresses when converting
IP address to a string in inet_ntop() function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix two issues with net tcp command:
* The `net tcp` commands are still based on net_context API. For TCP,
the API caller (net shell) should add one extra reference to the
allocated net context, to prevent premature context release in case of
connection teardown. Currently that was not the case, and the context
was released too early, resulting in missing final ACK from the Zephyr
side on connection close.
* The net context API should not be called from the registered connect
callback, as this creates a temporary deadlock situation. The
net_context_connect() function blocks until the connection is
established, or an error or timeout occurs. For that time the
net_context mutex is being locked. In case of connection error (for
example after receiving RST packet) the connect callback is called,
indicating an error. If we try to call net_context API from within, a
deadlock situation takes place, as the context mutex is still locked
by the net_context_connect() (called from the shell thread). This
blocks the further execution of the TCP stack and can result in an
unexpected behavior (like for example retransmitting the SYN packet,
which takes place from yet another thread, TCP work queue).
Fix this, by releasing the net context not from the callback directly,
but based on the return value from net_context_connect().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The warning which became error looks like this
error: type qualifiers ignored on function return type
[-Werror=ignored-qualifiers]
219 | const char * const wifi_ps_txt(enum wifi_ps ps_name);
It is pointless to add a const qualifier to a return value.
So remove the const pointer to avoid this warning.
Fixes#64197
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The interface number is generated automatically if one
presses <tab> when expecting the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow multiple commands use the same dynamic shell command
completion when expecting network interface index.
For example "net iface" and "net stats" are such commands.
The network interface expansion cannot be used in "net ipv6 add",
"net ipv4 add" and "net route" commands as they require more
data after the network interface index argument.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "net stacks" has been obsolete for a long time already
so remove it for good. It is replaced by "kernel stacks" cmd.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is a preparation for the refactoring. The old "net" command
is renamed "net_old" so that the individual commands can be
placed into a separate .c files.
This is done like this because we need to use the
SHELL_SUBCMD_SET_CREATE() to create the sub-command and then
use the SHELL_SUBCMD_ADD() in the .c files to add the command
into the sub-command and not get conflict with the same name
sub-command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is preparation commit that moves the net shell code to
subsys/net/lib/shell directory. The following commits will
then refactor the code in net_shell.c to smaller and more
manageable pieces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of strlen() use sizeof() in FL() macro. This way
all the checks are done at compile time instead of runtime.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add Kconfig option to control TCP RST behavior on connection attempts on
unbound ports. If enabled, TCP stack will reply with RST packet (enabled
by default).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Send RST as a reply for unexpected TCP packets in the following
scenarios:
1) Unexpected ACK value received during handshake (connection still open
on the peer side),
2) Unexpected data packet on a listening port (accepted connection
closed),
3) SYN received on a closed port.
This allows the other end to detect that the connection is no longer
valid (for example due to reboot) and release the resources.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a helper function which allows to send a RST packet in response to
an unexpected TCP packet, w/o associated connection or net context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As composite operations don't have path in CoAP packet,
it wrongly triggered a check for security object and got
denied the access.
Fixes#64012
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When objects are initialized, empty strings should be set to length of
zero, instead of length of the full buffer.
So use INIT_OBJ_RES_DATA_LEN() to give both, the buffer size and data
length.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When resource instances are initialized, we must calculate
beginning of the data buffer using the index and maximum
data length. Otherwise buffers would overlap with previous.
Fixes#64011
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
As the lwm2m_registry.c and specificly lwm2m_set()
functions already ensure null-terminator on string and
count that into string lenght, the content type handlers
should do the same.
When string is written, strlen()+1 is the data length.
When string is read, use the data length, so we don't
leak uninitialized strings. If buffer overrun have
removed the null-terminator the strlen() migh be larger
than data_len.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Resend the request with Echo option and the received Echo
option value when receiving a 4.01 (Unauthorized) response
with the Echo option.
Add missing header file kernel.h to coap_client.h.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
The stack size was previously hardcoded in the source code, making it
difficult to change when enabling options that require a larger stack.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
According to IEEE Std 802.1AS-2011 11.3.3, gPTP messages are not
VLAN-tagged.
Remove the use of VLAN headers for gPTP messages on the TX path.
The RX path is handled by the drivers. The network drivers in Zephyr
might need to be updated as well in order to accept receiving
non-VLAN-tagged gPTP messages when the CONFIG_NET_VLAN option is
selected.
Continue sending gPTP packets with VLAN tags when CONFIG_NET_GPTP_VLAN
is enabled. Specify that this option is for testing purposes.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The previous implementation was setting priority 3 (Critical
applications) for Sync, Pdelay and Pdelay_Resp messages; and priority 6
(Internetwork control) for the other PTP messages. This might have been
done under the incorrect understanding that "Critical applications" was
the highest priority.
This resulted in the Pdelay_Resp_Follow_Up getting sent before the
Pdelay_Resp message when enough TC_TX queues were being used
(NET_TC_TX_COUNT >= 2), which is an inversion compared to the intended
order.
Invert the priority of the outgoing PTP packets so that the PTP event
messages are sent with higher priority, as was originally intended.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The priority 3 (Critical applications) was incorrectly marked as
"highest priority", which might have led to incorrect use of
NET_PRIORITY_CA in some cases.
Note that this is already correctly advertized in other places, as it
was partially fixed in af8a0b1a5d.
NET_TC_SKIP_FOR_HIGH_PRIO was previously only allowing to push priority
3 (Critical applications) packets directly to the driver, but not the
ones with a higher priority. Change it so that it is now in effect for
priority 3 and above.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Add new configuration value CONFIG_LWM2M_UPDATE_PERIOD
that allows calculating update period from last update,
instead of calculating it from the lifetime.
In runtime, server is allowed to change the lifetime of the
registration which causes update perdiod to be effected.
When fixed update period is preferred, UPDATE_PERIOD
config is then used.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fixing kernel crash caused by memory release
while having a scheduled work item pending.
Signed-off-by: Jeroen van Dooren <jeroen.van.dooren@nobleo.nl>
Currently context->local is not set for offloaded interface.
This change move net_offload_bind call after set of context->local.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Only confirmable messages need pending tracking. Non-confirmable
messages are released after sending.
Match incoming packets with token, not message ID.
Ignore responses with non-matching tokens.
Remove unused function send_reset().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
In case observation token changes (the LwM2M server re-sends
observation request to the client), the LwM2M engine should cancel any
ongoing notifications based on the old token. Otherwise, it will be
impossible to match the pending notification reply (ACK) with the
observer context anymore, causing new notifications for this
observation to stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The compiler emits a "null where non-null expected" warning unless the
argument of strlen is non-null at compile time.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Always clone net_pkt to pass to promiscuous queue.
Previously, net_pkt was passed to L2 before conditionally cloning.
But L2 would in some cases strip ethernet headers, so cloned
net_pkt received through promiscuous interface would be missing headers.
Signed-off-by: Kieran Tyrrell <kieran@sienda.com>
The mode command operation has to be set to WIFI_MGMT_GET when the
option -g is provided. It was mistakenly set to true. Correcting the
same
This PR fixes#63424 and sets the proper value for the get command
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This commit adds a check to prevent attempting to reestablish
the PPP session if the carrier is down. Without this check,
the PPP FSM attempts and fails to establish a PPP session
twice before giving up. The behavior is not breaking anything,
but it is not desired.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Rearranges the k_mem_slab fields so that information that describes
how much of the memory slab is used is co-located. This will allow
easier of its statistics into the object core statistics reporting
framework.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
A minor overlook from the recent ICMP rework, the registered handlers
should no longer unref the processed packet as it's now the
responsibility of the ICMP module.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As we already log fragmented packets there's no need to log them again
unless they have been fully assembled and the result is to be logged.
We also want to log the final packet in all cases (after mangling LL
address) for the non-fragmented case.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
It is the general rule in Zephyr's network stack that methods that
return NET_OK are expected to have "consumed" the packet, i.e. it should
not be referenced any more.
This change applies this rule to the methods in ieee802154_mgmt.* for
improved consistency with the remainder of the network stack.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The "encryption only" security level was deprecated in IEEE
802.15.4-2015. This deprecation has already been introduced in the code
but was overlooked in net config.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
A little refactoring that simplifies dealing with nanosecond timestamp
values in packets and further decouples calling code from PTP:
Benefits:
- simplifies calling code by removing redundant conversions.
- prepares for removing PTP dependencies from net_pkt.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The current zperf tcp/udp download command doesn't provide the option
to bind the server to a specific host address. If there is more than
one interface, it will not be possible to test each interface with zperf
tcp/udp download command without building the Zpehyr.
This patch will add support for zperf tcp/udp download command to bind
server to host interface address.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Added a new event for LWM2M_RD_CLIENT_EVENT_DEREGISTER for
indicate LwM2M client dereistartion.
Updated unit test and sample for new event type
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
The experimental status of the PPP L2 is long overdue so
it can be removed as the component is working fine.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds a function k_object_is_valid() to check if a kernel
object exists, of certain type, and has been initialized.
This replaces the same (or very similar) code that has been
copied from kernel into the network subsystem.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Re-add the `WIFI_MGMT_FORCED_PASSIVE_SCAN` option removed in #62751.
Now that `struct wifi_scan_params` is a reasonable size, we can enforce
the passive scan request even when no parameter struct is supplied by
the user.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Instead of providing a comma seperated list of SSIDs, provide the SSIDs
individually. This substantially simplifies the implementation.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix bug in timeout_expired() function. Coap client was resending
pending messages after 500 ms (COAP_PERIODIC_TIMEOUT) and didn't
wait for retransmission timeout.
Use 64-bit k_uptime_get()
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Hides types used in the IEEE 802.15.4 L2 sub-API and L2-internal APIs
that are of no public interest and improves documentation of the
remainder.
The changes are mostly minor as the API documentation had already been
improved and clarified in previous changes. Also includes non-visible
documentation to the subsystem-internal Frame API by adding references
to the specification.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Write documentation for conn_mgr and its subsystems, especially
guidelines for writing connectivity implementations
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
The CONFIG_NET_L2_WIFI_SHELL isn't always enabled.
But these functions might still be used, so need to
move functions into mgmt.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
If an IPv4 address is requested on an IPv6 interface or vice versa
use a sane default fallback address to send the response.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The zperf shell sends a IPv6 ping at the start when working
with IPv6. Convert the sending of the ping to use the new API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add suitable functions that offloaded network device driver
can receive ICMP Echo-Request (ping) requests and give
ICMP responses back when it receives them from the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add new net_if_is_offloaded(iface) that returns true if
the network interface is offloaded (either IP or socket
offloading is enabled for that interface) and false if
the interface is not offloaded.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to send ICMP Echo Request message a.k.a pings.
The same ICMP API and framework is used for network stack
internal needs in later commits. One benefit for this new
API is that it allows sending Echo Requests to offlined
network devices.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add DHCPv6 support to the net config library. In case DHCPv6 is enabled,
net config will attempt to acquire IPv6 address and/or prefix when used.
The user can select with Kconfig whether to request address or prefix
(or both).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a DHCPv6 client implementation for Zephyr (RFC 8415).
The implementation allows to request IPv6 address and/or prefix from the
DHCPv6 server, and for now supports only the mandatory set of DHCPv6
options needed to achieve this. Currently the implementation supports
the following scenarios:
* Requesting new IPv6 address/prefix with Solicit/Request exchange
* Refreshing existing leases with Confirm, Renew or Rebind (depending
on the context).
For now, no Information Request (the case where neither IPv6 address or
prefix are requested) is supported. No support for Reconfigure was added
either, as this is optional (the client manifests clearly to the server
that it does not support Reconfigure). Support for these can be added
later if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Code using sys_csrand_get should depend on CONFIG_CSPRNG_ENABLED symbol
and not in ENTROPY_HAS_DRIVER since they are not using the entropy
device directly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Replaces the previous approach to define bands via hardware capabilities
by the standard conforming concept of channel pages.
In the short term this allows us to correctly calculate the PHY specific
symbol rate and several parameters that directly depend from the symbol
rate and were previously not being correctly calculated for some of the
drivers whose channel pages could not be represented previously:
* We now support sub-nanosecond precision symbol rates for UWB. Rounding
errors are being minimized by switching from a divide-then-multiply
approach to a multiply-then-divide approach.
* UWB HRP: symbol rate depends on channel page specific preamble symbol
rate which again requires the pulse repetition value to be known
* Several MAC timings are being corrected based on the now correctly
calculated symbol rates, namely aTurnaroundTime, aUnitBackoffPeriod,
aBaseSuperframeDuration.
In the long term, this change unlocks such highly promising functional
areas as UWB ranging and SUN-PHY channel hopping in the SubG area (plus
of course any other PHY specific feature).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Previously each piece of LwM2M SEND was
using token length of zero. I think this was unintentional.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To protect the integrity of outgoing block-wise transfers, append
Etag option that allows client to see if the received block is
generated from same content as it is expecting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow blockwise-send buffers to be used with GET and FETCH
queries as well.
When outgoing packet is split into multiple blocks, don't free
it when first block is send. Keep it in memory until some other requests
come.
Following queries to next block are matched using CoAP token.
However, this required Leshan to use COAP.BLOCKWISE_REUSE_TOKEN=true
option from Californium.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
lwm2m_udp_receive() is only called with same function
pointer, so there no need to carry that in the parameter.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In reality, single-write is the only operation that handles
BLOCK1 operations when receiving paylod.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Partial content format support is required to have a proper support
for content format OPAQUE instead of threading it as a part of
plain text format.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Move commands that require parameters first into the list.
Move syntax line first, command documentation second,
flags last. This is much like Unix commands do
❯ /bin/ls --help
Usage: /bin/ls [OPTION]... [FILE]...
List information about the FILEs (the current directory by default).
Compared to:
uart:~$ lwm2m
lwm2m - LwM2M commands
Subcommands:
read :read PATH [OPTIONS]
Read value from LwM2M resource
-x Read value as hex stream (default)
-s Read value as string
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
We must send the packet without queueing it. The pkt has already
been queued for sending, once by net_if and second time in the ARP
queue. We must not queue it twice in net_if so that the statistics
of the pkt are not counted twice and the packet filter callbacks
are only called once.
Fixes#62483
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is always possible to bind to same port if the sockets
are in different address family.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Turn the nested arrays of `scan_params->chan` into a single array.
This adds the requirement to specify the band for each channel, but
eliminates the large amount of dead memory for unused bands. Overall,
this saves 50% of the RAM space for this variable.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Make the maximum number of channels that can be manually scanned
configurable by the application. The previous value of 233 was vastly
overallocating memory as the largest band only contains 60 allocated
channels.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
A few attributes isn't cloned togerder with pkt.
This commit add missing part.
Additionally, because the `eof` flag in net_pkt structure is
avilable unconditionally hence `#if defined(CONFIG_NET_SOCKETS)`
guard has been removed form setter and getter functions for
this flag.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
In net_pkt structure couple of flags are no longer used.
Flag pkt_queued can be removed permanently togeter with setter
and getter functions.
Second flag sent_or_eof has been renamed because it is still
used partially only for indicating EOF. Additionally unused setter
and getter for 'sent_' part of this flag are removed.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
In spec:
The LwM2M Client MUST reject any LwM2M Server operation on
the Security Object (ID: 0) with an "4.01 Unauthorized" response
code.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
With bootstrap one function is unused. Fix by changing
ifdef to if (IS_ENABLED()) so linker can drop it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The header file contains mixture of functions and static arrays.
Replacing static arrays to functions.
Initialize functions in C file.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Remove the wifi_mgmt interface overriding default values with values
from kconfig. The defaults were only applied when a `params` struct was
provided by the application.
This is the case when the application is explicitly setting the options
it wants, why is the mgmt API changing these. When `params` is NULL and
thus modem defaults are requested, these defaults aren't applied. This
is the opposite behaviour from what seems reasonable.
In addition, these options are:
* Undocumented
* Using non-trivial string parsing functions (strtok)
* Adding complexity to the API implementation by forcing support for
ROM versions of command line arguments.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commits adds support for the SO_REUSEPORT socket option.
The implementation follows the behavior of BSD and tries to also follow
the specific additional features of linux with the following
limitations:
* SO_REUSEADDR and SO_REUSEPORT are not "the same" for client sockets,
as we do not have a trivial way so identify a socket as "client"
during binding. To get the Linux behavior, one has to use SO_REUSEPORT
with Zephyr
* No prevention of "port hijacking"
* No support for the load balancing stuff for incoming
packets/connections
There is also a new Kconfig option to control this feature, which is
enabled by default if TCP or UDP is enabled.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commit adds support for the SO_REUSEADDR option to be enabled for
a socket using setsockopt(). With this option, it is possible to bind
multiple sockets to the same local IP address / port combination, when
one of the IP address is unspecified (ANY_ADDR).
The implementation strictly follows the BSD implementation and tries to
follow the Linux implementation as close as possible. However, there is
one limitation: for client sockets, the Linux implementation of
SO_REUSEADDR behaves exactly like the one for SO_REUSEPORT and enables
multiple sockets to have exactly the same specific IP address / port
combination. This behavior is not possible with this implementation, as
there is no trivial way to identify a socket to be a client socket
during the bind() call. For this behavior, one has to use the
SO_REUSEPORT option in Zephyr.
There is also a new Kconfig to control this feature similar to other
socket options: CONFIG_NET_CONTEXT_REUSEADDR. This option is enabled by
default if TCP or UDP are enabled. However, it can still be disabled
explicitly.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
While matching source address for a given Link-Local destination the
functions iterate over interfaces and return a first result with a
valid LL-address. However, they should first try to fetch address of
the default interface as it not always the first one on the list.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Allow Bootstrap server to close the DTLS connection immediately
after receiving Ack to Bootstrap-Finish command.
This is not an error as either parties are allowed to tear down
the connection.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow certain RD-client states to timeout.
As stated in LwM2M specification:
The bootstrap procedure failed when the LwM2M Client did not
receive the "Bootstrap-Finish" operation after the
EXCHANGE_LIFETIME time period expired.
The EXCHANGE_LIFETIME parameter is defined in RFC 7252
We must handle the case where Bootstrap server is not sending
information towards us.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When publish buffer run out, no thread active process work.
Fix this, by reschedule process work.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Current MQTT-SN topic and publish allocators are not thread safe.
Fix this, by using k_mem_slab instead of arrays.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Releasing the lock before notifying condvar led to a race condition
between a thread calling k_condvar_wait to wait for a condition variable
and another thread signalling for this same condition variable. This
resulted in the waiting thread to stay pending and the handle to it
getting removed from the notifyq, meaning it couldn't get woken up
again.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
When a packet can't be cloned we crash as we try to initialize the
cursor on a nullptr. We should check if we have a valid pointer,
and if we don't we drop the packet along with a warning.
Signed-off-by: Andreas Ålgård <aal@ixys.no>
In low memory conditions, its possible for socketpair memory allocation
to fail and then the socketpair is freed but after that the remote
semaphore is released causing a crash.
Fix this by freeing the socketpair after releasing the semaphore. Add a
test case to induce low memory conditions (low HEAP and high socketpair
buffer size), with the fix issue is not seen.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
All WiFi channel numbers fit within a 8 bit number, as the maximum
allocated channel is 233. This halves the memory requirement.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The errors are printed in hex, but no prefix was used. This could be
confused with usual errno return values. The 0x prefix makes clear
that it's a hex value.
Also a missing minus sign is added to one log message.
Signed-off-by: Martin Jäger <martin@libre.solar>
NET_STATISTICS_PPP are dependend on NET_L2_PPP, not on NET_PPP.
This allows to use statistics also in modem subsys.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
This patch amends the existing L2CAP accept callbacks to use the new
accept signature that includes a pointer to the L2CAP server structure.
Signed-off-by: Donatien Garnier <donatien.garnier@blecon.net>
This change brings in support for setting various Wi-Fi modes and
enables a specific Wi-Fi interface to be also placed into a sniffer
operation via monitor mode and promiscuous mode. A raw TX- packet
Injection mode is also introduced
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This adds support to allow any priority from the user instead of
limiting to the protocol values (0-7). This is useful in conveying
custom priorities from application to the driver/chipset.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is handy in testing of setting priority directly rather than
deriving from DSCP. Please note ICMP doesn't use net context.
This is applicable for both shell and API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
wifi_utils_parse_scan_ssids could cause a crash if a constant string is
passed to it. Fix this by duplicating the input string parameter before
parsing it with strtok_r.
Also limit the range of the CONFIG_WIFI_SCAN_SSID_FILT_MAX parameter
from 1 to 4 to avoid stack overflow due to users specifying a large
value for this parameter.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
wifi_utils_parse_scan_bands could cause a crash if a constant string is
passed to it. Fix this by duplicating the input string parameter before
parsing it with strtok_r.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add a network configuration option to configure whether IEEE 802.15.4
packets are expected to be ACKed or not.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
In the IEEE 802.15.4 area certain settings must be set before
net_if_up() may be called (e.g. the channel).
Also net_if_up() may not be called if
CONFIG_IEEE802154_NET_IF_NO_AUTO_START=y.
This fixes the set-up order and handling of
CONFIG_IEEE802154_NET_IF_NO_AUTO_START.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
In case RST packet is received or malformed packet is received, the TCP
should not proceed with the state machine execution (which may process
the invalid packet) but rather jump directly to exit, where the
connection will be closed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The net_mgmt subsystem offers a function which waits (blocks)
until a specified net event occurs. An event callback is
pushed to the stack, then added to the net_mgmt_event_callback
list. If the event occurs, the net_mgmt thread calls the
callback and deletes the callback from the list. However, if
the event does not occur within the timeout specified when
invoking mgmt_event_wait_call() the function will return,
corrupting the callback structure the stack is reused.
This PR fixes the issue by deleting the callback before exiting
in case the event does not occur.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Modify the signature of the k_mem_slab_free() function with a new one,
replacing the old void **mem with void *mem as a parameter.
The following function:
void k_mem_slab_free(struct k_mem_slab *slab, void **mem);
has the wrong signature. mem is only used as a regular pointer, so there
is no need to use a double-pointer. The correct signature should be:
void k_mem_slab_free(struct k_mem_slab *slab, void *mem);
The issue with the current signature, although functional, is that it is
extremely confusing. I myself, a veteran Zephyr developer, was confused
by this parameter when looking at it recently.
All in-tree uses of the function have been adapted.
Fixes#61888.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
If network interface name support is enabled, print the name
when showing network interface data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure we use the network interface name (if configured)
instead of device name when binding to certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_NET_INTERFACE_NAME is enabled (default is y), then
system will automatically set a user friendly name to the network
interface like eth0, wlan0 etc.
Application can change the interface name if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The twt and ps helper functions were not namespaced (were missing
wifi_ prefix).
Also change wifi_get_twt_... to more logical wifi_twt_get...
like the other twt prefixed functions and wifi_get_ps... to
wifi_ps_get... like the other ps prefixed functions.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add TLS_DTLS_CID socket option, which enables to use the Connection ID
extension for the DTLS session.
The option provides control of the use of CID with the `setsockopt()`
function. The value provided can disable, enable, and control whether to
provide a CID to the peer. It uses a random self CID (if told to provide
one to the peer) unless TLS_DTLS_CID_VALUE set previously.
Add TLS_DTLS_CID_VALUE to get or set the CID sent to the peer, if any.
Add TLS_DTLS_PEER_CID_VALUE to get the CID value provided by the peer,
if any.
Add TLS_DTLS_CID_STATUS to determine if CID used, and whether
bidirectional or one way.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Fix few mismatched CONTAINER_OF, few missing k_work_delayable_from_work
and a missing reference to the array first element.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add a helper allowing connectivity implementations to more easily access
connectivity flags on connectivity bindings.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds conn_mgr_binding_lock/conn_mgr_binding_unlock, which connectivity
implementations can call to lock or unlock the passed in connectivity
binding.
This allows connectivity implementations to safely make direct accesses
to binding data from outside conn_mgr_conn_api callbacks, and should
allow cleaner, more robust connectivity implementations to be written.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Splits many definitions from conn_mgr_connectivity.h off into their own
header, conn_mgr_connectivity_impl.h
conn_mgr_connectivity.h now focuses solely on user/application-facing
APIs, and conn_mgr_connectivity_impl now contains all functions, utils,
definitions intended for use by connectivity implementations, including
conn_mgr_if_get_binding, which is now available for use by connectivity
implementations.
This lays the foundation for allowing connectivity implementations
easier and safer access to their internal state through internal APIs.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
This change allows to register additional handlers for ICMPv6 so the
user can handle some of the messages between they are handled by the
ICMPv6 module in Zephyr by returning NET_CONTINUE.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
There was a corner case which was not handled well in a scenario, when
listening socket was closed during an active handshake with a new
client.
When a listening socket is closed, the accept callback is cleared on the
TCP context. If this happened during a handshake with a new client, i.
e. before final ACK from the client was processed, this lead to a
context leak, as application did not take ownership of the connection
(i. e. had no means to close it).
Fix this, by proactively closing the connection at the TCP level when no
accept_cb is available. Instead of ignoring the fact that no accept_cb
is available, the TCP stack will now enter TCP_FIN_WAIT_1 state and
proceed with a graceful teardown of the connection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
getsockname() did not work properly on bound sockets, as it verified
whether the socket has an active connection before retuning result. This
is not correct, as socket after bound may not have a connection yet.
Fix this, by verifying that local_addr on an underlying net_context is
set, to determine whether socket has a local address assigned, before
returning result.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
* Renamed 'coap_client_init_path_options' to
'coap_packet_set_path'
* Moved into 'coap.c'
* The function is public now
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Fix options initialization for path and query
when a final segment is one character long.
For example, "a/b" inits path as ["a"] instead
of expected ["a", "b"]. The same applies to
query option. The "a/abc?a&b" options won't
contain "b".
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
net_iface_status is larger than scan_result, causing
net_iface events to be dropped due to info exceeding
NET_EVENT_INFO_MAX_SIZE.
Signed-off-by: Noah Luskey <LuskeyNoah@gmail.com>
The previous patch to address race condition on STREAM sockets had a
side effect on DGRAM socket, where net_context_recv() is not only
installing recv callback, but also registering a connection at net_conn
level. Doing so before setting remote address first (which is done in
net_context_connect()) had an impact on the connected DGRAM socket
operation, which now accepted packets from any remote peer, and not only
the one socket was connected to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ICMPv6 messages with type < 128 are error messages, where we should not
send back another error. The meaning of the code depends on the type.
Signed-off-by: Andreas Müller <andreas.mueller@husqvarnagroup.com>
When resource data length is set to zero, we still need to
ensure that string reading will return an empty string.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Changed Add to Enable in help text to convey the intended use of the
Kconfig NET_L2_WIFI_MGMT.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add a scan command option to print the help text for the scan command.
This is to facilitate ease of using the command (since now there are
many different options added to the scan command).
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add scan extension to allow limiting the scanning to specific channels.
Only 20 MHz channel specifications are allowed presently.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add scan extension to allow limiting the scan results to a user defined
maximum number. This parameter is intended to return results with the
best RSSI. It cannot be counted upon to limit the scan times since the
Wi-Fi chips might have to scan all the channels to find APs with the
best RSSI values across all channels.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Add scan extension to control scanning time spent on channels where
passive scanning is used.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Added scan extension to support scanning individual Wi-Fi bands or
combinations thereof.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
Modify the way the scan type option is passed to the wifi scan command.
This makes it flexible to add more scan options.
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
There are a few structs, unions, and enums where -Wshadow would
complain. Since names being the same are intentional, we need
to tell compiler to ignore -Wshadow for those names.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When the application closes the connection, it enters the FIN1 state.
Restructure this sequence to RST on data received after the application
has closed the socket.
Next to that deal with packets that contain both data and a FIN flag.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The `ioctl()` interface is already supported by the network
subsystem but there was no `zsock_` interface available for it.
Add the `zsock_ioctl()` syscall.
Implement two somewhat commont ioctl requests for socket
file descriptors; namely
- `FIONBIO` set non-blocking I/O mode
- `FIONREAD` get the number of available bytes
In the process, added `net_pkt_ip_proto_hdr_len()`
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
In order to get a semi-accurate assessment of how many
bytes are available on a socket prior to performing a read,
BSD and POSIX systems have typically used
`ioctl(fd, FIONREAD, &avail)`
We can support this in Zephyr as well with little effort, so
add support for `socketpair()` sockets as an example.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Previously, if a net_context had multiple packets already in
the receive queue, and a call to zsock_recvfrom() was made with
a buffer large enough to receive content from multiple packets,
only the content from a single receive buffer would be received.
Since zsock_recvfrom() is a system call, which has a
non-negligible overhead, it makes sense to receive as many bytes
as possible per system call.
Add zsock_recv_stream_immediate() as a shorthand for
"fill this receive buffer with as many bytes as possible without
blocking". Allow nullable buffer parameters so that we can also
have a shorthand for "count how many bytes are immediately
available".
With minor refactoring, zsock_recv_stream_timed() is a simple
wrapper around zsock_recv_stream_immediate() that handles timing
and error conditions.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The added function allows to check if a descriptive block
option was already added to a message.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
In some cases the options of a CoAP message are reused for
block transfer. Then the block header needs to be updated.
The current approach is to remove the old block option and
add an updated one.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
The provided function allows to remove a CoAP option in a
message. This is useful for reusing parts of a message.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
The reply callback doesn't need to handle the case when the
code of the reply is 'continue' (2.31). In that case the callback
is not executed until the last block is transmitted.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
When using block-wise transfer, call the reply callback only when
the last block arrived.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
Fix possible race conditions when state and results are written
by locking the registry, so a first write does not cause Notify
message to be send too early.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When the protocol layer like TCP is blocking transmission, the socket
layer will attempt and wait for a maximum amount of time before returning
with an ENOBUFS error.
This change allows to set the maximum waiting time from the configuration
file instead of using a fixed 10 second value.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Bootstrap executable cause socket to be closed, so
it requires some delay for Ack to be send out as well.
Similarly, add small delay for Update trigger, so the
possible Ack goes out before the actual update message.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When BOOTSTRAP FINNISH message was received, it caused
engine to immediately switch to BOOTSTRAP_TRANS_DONE state
which then closed the connection.
Ack packet was still on the send-queue so it never got send before close().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Some state changes were do by directly writing into
client.engine_state variable, followed by call next_event_at(0);
This causes hard-to-find side effects.
Refactor all state transitions to use set_sm_state() to have better
control for it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In case a TCP connection should be established with a specific source
IP address (e.g., by calling bind() prior to connect() on the socket),
we have to actually place the address in the outgoing packet.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
Remove the shadowing ret variable and fix a bug that was related to
its existence - the shadowing ret variable was assigned with -ETIMEDOUT
which was supposed to be retuned by the function, but was not because
the ret variable at the function scope was left intact.
Also remove the unneded goto unlock; jump (assigning the error code is
the last operation before unlocking the mutex anyway).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This fixes 3 issues that came within PR #59124 for ppp uart usage.
Earlier start/stop of ppp was done at enable() but that
was removed in PR #59124. Now putting enable/disable() back and
putting start/stop there.
Additionally, there was a double ppp carrier ON when NET_EVENT_IF_DOWN.
For that net_if_carrier_on/off is set in uart ppp.c driver.
Also, maybe worth to be mentioned that after PR #59124 there is no
ppp carrier off when lcp is disconnected, for workaround that change,
application should use ppp dead/running events.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
Updates NET_SOCKETS_TLS_MAX_APP_PROTOCOLS Kconfig option description to use
DTLS instead of DTL.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
* Create submenu for protocol versions.
Like LwM2M 1.0 vs 1.1. Object versions.
* Create submenu for engine features.
Containing all engine tweaks that are not directly from
protocol specification.
* Create submenu for all memory tuning options.
For example maximum number of certain objects, buffer
sizes, etc.
* Order all objects by object ID and show the ID in
title.
* When multiple options depend on same feature, group
them under if <option> ... endif. Preferably directly
after the selection itself.
* Move IPSO and uCIFI menuentries one sublevel up.
* Drop deprecated entries to bottom.
No functional changes, just clean up of Kconfig menu.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
At the moment, NET_EVENT_IPV6_PREFIX_ADD and NET_EVENT_IPV6_PREFIX_DEL
events provide provide information about an address without its length
and lifetime.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
To allow insighed into the correct functioning of the collision avoidance,
log the internal values and function calls.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
To avoid a TCP connection from collapsing a link, implement a collision
avoidance algorithm. Initially TCP new Reno is implemented for its
simplicity.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The PPP TX thread handles the transmission of packets at PPP layer.
Make it's priority configurable, so it's priority can be configured higher
then higher protocol layers.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The TCP work queue is handles all TCP transmission and maintenance tasks.
Make it's priority configurable, so it can be configured to a lower
priority than the lower level network layers to avoid it consuming all
net_bufs before handing over execution to the lower layer network layers.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Use 64bit timestamps from k_uptime_get() so they don't
roll over during the expected device lifetime.
Fixes#60826
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Engine now allows registering service callbacks that are
called only once on a given timestamp.
This allows tickless services to be developed.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow socket-loop to wake up immediately, if there are changes,
instead of waiting for zsock_poll() to timeout.
This change makes engine more reactive and removes
hard coded timeout from zsock_poll().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When the target board does not have heap by default, allows
statically reserving the space for required socketpairs.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Likely this trigger of the send_data_timer was an alternative for the
function that has been filled in by the ZWP transmission.
At the moment this timer has the potential to cause spurious
retransmissions that can degrade the throughput of the network stack.
Second to that it can accelerate the retransmission process, quickly
running to the number of retransmissions, causing a connection failure.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
At any ack, the retransmission timer was cancelled. This means when an ACK
is only partially acknowledging pending data, followed by a packet loss,
the connection ended in a deadlock eventually timing out.
By checking if there is any pending data for transmission before canceling
the retransmission timer, there is no risk of this lock-up any more.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The IEEE 802.15.4 API and networking subsystem were using several
inconsistent timestamp resolutions and types. This change defines all
timestamps with nanosecond resolution and reduces the number of
available types to represent timestamps to two:
* `struct net_ptp_time` for PTP timestamps
* `net_time_t` for all other high resolution timestamps
All timestamps (including PTP timestamps) are now referred to a
"virtual" local network subsystem clock source based on the well-defined
types above. It is the responsibility of network subsystem L2/driver
implementations (notably Ethernet and IEEE 802.15.4 L2 stacks) to ensure
consistency of all timestamps and radio timer values exposed by the
driver API to such a network subsystem uptime reference clock
independent of internal implementation details.
The "virtual" network clock source may be implemented based on arbitrary
hardware peripherals (e.g. a coarse low power RTC counter during sleep
time plus a high resolution/high precision radio timer while receiving
or sending). Such implementation details must be hidden from API
clients, as if the driver used a single high resolution clock source
instead.
For IEEE 802.15.4, whenever timestamps refer to packet send or receive
times, they are measured when the end of the IEEE 802.15.4 SFD (message
timestamp point) is present at the local antenna (reference plane).
Due to its limited range of ~290 years, net_time_t timestamps (and
therefore net_pkt timestamps and times) must not be used to represent
absolute points in time referred to an external epoch independent of
system uptime (e.g. UTC, TAI, PTP, NTP, ...).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add new net_if API functions which allow to loop over all valid
IPv4/IPv6 addresses assigned to the interface and execute a callback
function on them.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When parsing user input for "wifi connect" and "wifi ap enable"
commands, the SSID and PSK lengths were not verified. It's better to
detect invalid connect/AP enable parameters early, so that help text can
be printed, instead of letting wifi_mgmt command to fail.
For WIFI_SECURITY_TYPE_SAE, follow the Linux convention of limiting the
size to 128 bytes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some DHCPv4 servers do not respect BROADCAST flag set on DHCP Discover,
replying with unicast packet, making it impossible to obtain DHCP
address by Zephyr in such cases.
RFC1542 chapter 3.1.1 makes the following statement about the BROADCAST
flag:
This addition to the protocol is a workaround for old host
implementations. Such implementations SHOULD be modified so
that they may receive unicast BOOTREPLY messages, thus making
use of this workaround unnecessary. In general, the use of
this mechanism is discouraged.
Making it clear that being able to process unicast replies from the DHCP
server is not only an optional behavior, but a recommended solution.
Therefore, introduce a support for unicast DHCPv4 in Zephyr. To achieve
this, add additional filtering rule at the IPv4 level - in case DHCPv4
is enabled, there is an active query and the packet is destined for the
DHCPv4 module, let it through for the DHCPv4 module to process,
regardless of the destination IP address.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The `attr_get` method is added to the ieee802154_radio to allow
reading of driver specific attributes of given device.
The enum `ieee802154_attr` provides common extension pattern
allowing to extend the attribute set.
Accessor function `ieee802154_radio_attr_get` is provided.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
